Initial Longer3D LK1/2 (Alfawise U20/U20+/U30) support (#14597)
Tanguy Pruvot
6 years ago
committed by
Scott Lahteine
parent
475ccfad62
commit
45bde333d5
@ -0,0 +1,160 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* ALFAWISE U30 (STM32F103VET6) board pin assignments
|
||||
*/
|
||||
|
||||
#if !defined(__STM32F1__) && !defined(STM32F1xx)
|
||||
#error "Oops! Select a STM32F1 board in 'Tools > Board.'"
|
||||
#elif HOTENDS > 1 || E_STEPPERS > 1
|
||||
#error "LONGER3D only supports 1 hotend / E-stepper. Comment out this line to continue."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Longer3D"
|
||||
#define ALFAWISE_UX0 // Common to all Alfawise STM32F1 boards
|
||||
|
||||
// Release PB4 (STEP_X_PIN) from JTAG NRST role.
|
||||
//#define DISABLE_DEBUG // > Hobi : We still want to debug with STLINK...
|
||||
#define DISABLE_JTAG // we free the jtag pins (PA15) but keep STLINK
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PC1 // pin 16
|
||||
//#define X_MAX_PIN PC0 // pin 15 Used as filament sensor on Alfawise setup
|
||||
#define Y_MIN_PIN PC15 // pin 9
|
||||
//#define Y_MAX_PIN PC14 // pin 8 Unused in stock Alfawise setup
|
||||
#define Z_MIN_PIN PE6 // pin 5 Standard Endstop or Z_Probe endstop function
|
||||
//#define Z_MAX_PIN PE5 // pin 4 Unused in stock Alfawise setup
|
||||
// May be used for BLTouch Servo function on older variants (<= V08)
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PB5 // pin 91
|
||||
#define X_STEP_PIN PB4 // pin 90
|
||||
#define X_DIR_PIN PB3 // pin 89
|
||||
|
||||
#define Y_ENABLE_PIN PB8 // pin 95
|
||||
#define Y_STEP_PIN PB7 // pin 93
|
||||
#define Y_DIR_PIN PB6 // pin 92
|
||||
|
||||
#define Z_ENABLE_PIN PE1 // pin 98
|
||||
#define Z_STEP_PIN PE0 // pin 97
|
||||
#define Z_DIR_PIN PB9 // pin 96
|
||||
|
||||
#define E0_ENABLE_PIN PE4 // pin 3
|
||||
#define E0_STEP_PIN PE3 // pin 2
|
||||
#define E0_DIR_PIN PE2 // pin 1
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PA0 // pin 23 (Nozzle 100K/3950 thermistor)
|
||||
#define TEMP_BED_PIN PA1 // pin 24 (Hot Bed 100K/3950 thermistor)
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PD3 // pin 84 (Nozzle Heat Mosfet)
|
||||
#define HEATER_BED_PIN PA8 // pin 67 (Hot Bed Mosfet)
|
||||
|
||||
#define FAN_PIN PA15 // pin 77 (4cm Fan)
|
||||
#define FAN_SOFT_PWM // Required to avoid issues with heating or STLink
|
||||
#define FAN_MIN_PWM 35 // Fan will not start in 1-30 range
|
||||
#define FAN_MAX_PWM 255
|
||||
|
||||
// Filament Sensor
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PC0 // XMAX plug on PCB used as filament runout sensor on Alfawise boards (inverting true)
|
||||
#endif
|
||||
|
||||
//#define BEEPER_PIN PD13 // pin 60 (Servo PWM output 5V/GND on Board V0G+) made for BL-Touch sensor
|
||||
// Can drive a PC Buzzer, if connected between PWM and 5V pins
|
||||
|
||||
#define LED_PIN PC2 // pin 17
|
||||
|
||||
//
|
||||
// PWM
|
||||
//
|
||||
//#define NUM_SERVOS 1
|
||||
//#define SERVO0_TIMER_NUM 1 // General or Adv. timer to use for the servo PWM (2 & 5 are reserved)
|
||||
|
||||
#define SERVO0_PWM_OD
|
||||
#define SERVO0_PIN PD13 // Open drain PWM pin on the V0G (GND or floating 5V)
|
||||
|
||||
//#define SERVO0_PIN PE5 // Pulled up PWM pin on the V08 (3.3V or 0)
|
||||
|
||||
/**
|
||||
* Note: Alfawise screens use various TFT controllers. Supported screens
|
||||
* are based on the ILI9342, ILI9328 and ST7798V. Define init sequences for
|
||||
* other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp
|
||||
*
|
||||
* If the screen stays white, disable 'LCD_RESET_PIN' to let the bootloader
|
||||
* init the screen.
|
||||
*
|
||||
* Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu
|
||||
* because Marlin uses the reset as a failsafe to revive a glitchy LCD.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#define LCD_RESET_PIN PC4 // pin 33
|
||||
#define LCD_BACKLIGHT_PIN PD12 // pin 59
|
||||
#define FSMC_CS_PIN PD7 // pin 88 = FSMC_NE1
|
||||
#define FSMC_RS_PIN PD11 // pin 58 A16 Register. Only one address needed
|
||||
|
||||
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
|
||||
#define FSMC_DMA_DEV DMA2
|
||||
#define FSMC_DMA_CHANNEL DMA_CH5
|
||||
|
||||
#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h
|
||||
#define DOGLCD_SCK -1
|
||||
|
||||
/**
|
||||
* Note: Alfawise U20/U30 boards DON'T use SPI2, as the hardware designer
|
||||
* mixed up MOSI and MISO pins. SPI is managed in SW, and needs pins
|
||||
* declared below.
|
||||
*/
|
||||
#if ENABLED(TOUCH_BUTTONS)
|
||||
#define TOUCH_CS_PIN PB12 // pin 51 SPI2_NSS
|
||||
#define TOUCH_SCK_PIN PB13 // pin 52
|
||||
#define TOUCH_MOSI_PIN PB14 // pin 53
|
||||
#define TOUCH_MISO_PIN PB15 // pin 54
|
||||
#define TOUCH_INT_PIN PC6 // pin 63 (PenIRQ coming from ADS7843)
|
||||
|
||||
#define BTN_ENC PB0 // pin 35 unconnected pin on Alfawise. (PC13 to try)
|
||||
#define BTN_EN1 -1 // Real pin is needed to enable encoder's push button
|
||||
#define BTN_EN2 -1 // functionality used by touch screen
|
||||
#endif
|
||||
|
||||
//
|
||||
// SPI1 (EEPROM W25Q64 + DAC OUT)
|
||||
//
|
||||
|
||||
#undef E2END
|
||||
#define E2END 0x7FF // EEPROM end address (reserve 2kB on sd/sram, real spi one is 8MB/64Mbits)
|
||||
/*
|
||||
#define SPI_EEPROM 1 // If commented this will create a file on the SD card as a replacement
|
||||
#define SPI_CHAN_EEPROM1 1
|
||||
#define SPI_EEPROM1_CS PC5 // pin 34
|
||||
|
||||
//#define EEPROM_SCK BOARD_SPI1_SCK_PIN // PA5 pin 30
|
||||
//#define EEPROM_MISO BOARD_SPI1_MISO_PIN // PA6 pin 31
|
||||
//#define EEPROM_MOSI BOARD_SPI1_MOSI_PIN // PA7 pin 32
|
||||
*/
|
||||
@ -0,0 +1,14 @@
|
||||
MEMORY
|
||||
{
|
||||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K - 40
|
||||
rom (rx) : ORIGIN = 0x08010000, LENGTH = 512K - 64K
|
||||
}
|
||||
|
||||
/* Provide memory region aliases for common.inc */
|
||||
REGION_ALIAS("REGION_TEXT", rom);
|
||||
REGION_ALIAS("REGION_DATA", ram);
|
||||
REGION_ALIAS("REGION_BSS", ram);
|
||||
REGION_ALIAS("REGION_RODATA", rom);
|
||||
|
||||
/* Let common.inc handle the real work. */
|
||||
INCLUDE common.inc
|
||||
@ -0,0 +1,26 @@
|
||||
Import("env")
|
||||
|
||||
# Relocate firmware from 0x08000000 to 0x08010000
|
||||
for define in env['CPPDEFINES']:
|
||||
if define[0] == "VECT_TAB_ADDR":
|
||||
env['CPPDEFINES'].remove(define)
|
||||
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08010000"))
|
||||
env.Replace(LDSCRIPT_PATH="buildroot/share/PlatformIO/ldscripts/alfawise_Ux0.ld")
|
||||
|
||||
# Encrypt ${PROGNAME}.bin and save it as 'project.bin'
|
||||
def encrypt(source, target, env):
|
||||
import os
|
||||
|
||||
firmware = open(target[0].path, "rb")
|
||||
marlin_alfa = open(target[0].dir.path +'/project.bin', "wb")
|
||||
length = os.path.getsize(target[0].path)
|
||||
position = 0
|
||||
try:
|
||||
while position < length:
|
||||
byte = firmware.read(1)
|
||||
marlin_alfa.write(byte)
|
||||
position += 1
|
||||
finally:
|
||||
firmware.close()
|
||||
marlin_alfa.close()
|
||||
env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt);
|
||||
@ -0,0 +1,15 @@
|
||||
#!/usr/bin/env bash
|
||||
#
|
||||
# Build tests for STM32F103VET6
|
||||
#
|
||||
|
||||
# exit on first failure
|
||||
set -e
|
||||
|
||||
use_example_configs Alfawise/U20
|
||||
opt_set MOTHERBOARD BOARD_LONGER3D_LK
|
||||
opt_set SERIAL_PORT 1
|
||||
exec_test $1 $2 "Full-featured U20 config"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,77 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 0
|
||||
#define STATUS_LOGO_WIDTH 38
|
||||
|
||||
static unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B11111111,B11111100,
|
||||
B10000000,B00000000,B00010000,B00000111,B11111100,
|
||||
B10000000,B00000000,B00010000,B00000000,B11111100,
|
||||
B10000000,B00000000,B00110000,B00000000,B01111100,
|
||||
B10000000,B00000000,B00110000,B00000000,B00111100,
|
||||
B10000000,B00000000,B01110000,B00000000,B00011100,
|
||||
B11111111,B10000000,B01110000,B00000000,B00001100,
|
||||
B11111111,B10000000,B11110000,B11100000,B00001100,
|
||||
B11111111,B00000000,B11110000,B11111000,B00001100,
|
||||
B11111111,B00000001,B11110000,B11111100,B00000100,
|
||||
B11111110,B00000001,B11110000,B11010010,B00000100,
|
||||
B11111110,B00000011,B11110000,B10101110,B00000100,
|
||||
B11111100,B00000000,B11110000,B10101111,B00000100,
|
||||
B11111100,B00000000,B00110000,B10000011,B00000100,
|
||||
B11111000,B00000000,B00110000,B11111111,B00000100,
|
||||
B11111000,B00000000,B00010000,B11111111,B00000100,
|
||||
B11111111,B11100000,B00010000,B10111111,B00000100,
|
||||
B11111111,B11110000,B00010000,B10101111,B00000100,
|
||||
B11111111,B11110000,B00010000,B10101110,B00000100,
|
||||
B11111111,B11110000,B00010000,B10000010,B00000100,
|
||||
B10000011,B11110000,B00010000,B11111100,B00000100,
|
||||
B10000001,B11110000,B00010000,B11111000,B00001100,
|
||||
B10000001,B11100000,B00010000,B11100000,B00001100,
|
||||
B10000000,B00000000,B00010000,B00000000,B00001100,
|
||||
B10000000,B00000000,B00110000,B00000000,B00011100,
|
||||
B11000000,B00000000,B00110000,B00000000,B00111100,
|
||||
B11000000,B00000000,B01110000,B00000000,B01111100,
|
||||
B11100000,B00000000,B11110000,B00000000,B11111100,
|
||||
B11111000,B00000011,B11110000,B00000111,B11111100
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_LOGO_X 0
|
||||
#define STATUS_HEATERS_X 50
|
||||
#define STATUS_BED_X 74
|
||||
Loading…
Reference in New Issue