microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Oscar (by Thinknthings of Korea) board support (#14574)

Browse Source
2.0.x
Jeonghwan Noh 5 years ago committed by Scott Lahteine
parent fdaa374490
commit 475ccfad62
3 changed files with 515 additions and 0 deletions
Show Stats Download Patch File Download Diff File

1
Marlin/src/core/boards.h
Unescape Escape View File

@ -93,6 +93,7 @@
#define BOARD_VORON 1139 // VORON Design
#define BOARD_TRONXY_V3_1_0 1140 // Tronxy TRONXY-V3-1.0
#define BOARD_Z_BOLT_X_SERIES 1141 // Z-Bolt X Series
#define BOARD_TT_OSCAR 1142 // TT OSCAR
//
// RAMBo and derivatives

2
Marlin/src/pins/pins.h
Unescape Escape View File

@ -176,6 +176,8 @@
#include "ramps/pins_TRONXY_V3_1_0.h" // ATmega2560 env:megaatmega2560
#elif MB(Z_BOLT_X_SERIES)
#include "ramps/pins_Z_BOLT_X_SERIES.h" // ATmega2560 env:megaatmega2560
#elif MB(TT_OSCAR)
#include "ramps/pins_TT_OSCAR.h" // ATmega2560 env:megaatmega2560
//
// RAMBo and derivatives

512
Marlin/src/pins/ramps/pins_TT_OSCAR.h
Unescape Escape View File

@ -0,0 +1,512 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#if HOTENDS > 5 || E_STEPPERS > 5
#error "TTOSCAR supports up to 5 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "TT OSCAR"
#define DEFAULT_MACHINE_NAME BOARD_NAME
//
// Servos
//
#define SERVO0_PIN 11
#define SERVO1_PIN 12
#define SERVO2_PIN 5
#define SERVO3_PIN 4
//
// Limit Switches
//
#define X_MIN_PIN 3
#define X_MAX_PIN 2
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN SERVO3_PIN
#endif
//
// Steppers
//
#define X_STEP_PIN 54
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
#define X_CS_PIN 57
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
#define Y_CS_PIN 58
#define Z_STEP_PIN 46
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 62
#define Z_CS_PIN 53
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24
#define E0_CS_PIN 49
#define E1_STEP_PIN 36
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
#define E1_CS_PIN E0_CS_PIN
#define E2_STEP_PIN 63
#define E2_DIR_PIN 22
#define E2_ENABLE_PIN 59
#define E2_CS_PIN E0_CS_PIN
#define E3_STEP_PIN 32
#define E3_DIR_PIN 40
#define E3_ENABLE_PIN 39
#define E3_CS_PIN E0_CS_PIN
#define E4_STEP_PIN 43
#define E4_DIR_PIN 42
#define E4_ENABLE_PIN 47
#define E4_CS_PIN E0_CS_PIN
#if ENABLED(HAVE_TMC2208)
/**
* TMC2208 stepper drivers
*
* Hardware serial communication ports.
* If undefined software serial is used according to the pins below
*/
//#define X_HARDWARE_SERIAL Serial1
//#define X2_HARDWARE_SERIAL Serial1
//#define Y_HARDWARE_SERIAL Serial1
//#define Y2_HARDWARE_SERIAL Serial1
//#define Z_HARDWARE_SERIAL Serial1
//#define Z2_HARDWARE_SERIAL Serial1
//#define E0_HARDWARE_SERIAL Serial1
//#define E1_HARDWARE_SERIAL Serial1
//#define E2_HARDWARE_SERIAL Serial1
//#define E3_HARDWARE_SERIAL Serial1
//#define E3_HARDWARE_SERIAL Serial1
//
// Software serial
//
#define X_SERIAL_TX_PIN -1 // 59
#define X_SERIAL_RX_PIN -1 // 63
#define X2_SERIAL_TX_PIN -1
#define X2_SERIAL_RX_PIN -1
#define Y_SERIAL_TX_PIN -1 // 64
#define Y_SERIAL_RX_PIN -1 // 40
#define Y2_SERIAL_TX_PIN -1
#define Y2_SERIAL_RX_PIN -1
#define Z_SERIAL_TX_PIN -1 // 44
#define Z_SERIAL_RX_PIN -1 // 42
#define Z2_SERIAL_TX_PIN -1
#define Z2_SERIAL_RX_PIN -1
#define E0_SERIAL_TX_PIN -1 // 66
#define E0_SERIAL_RX_PIN -1 // 65
#define E1_SERIAL_TX_PIN -1
#define E1_SERIAL_RX_PIN -1
#define E2_SERIAL_TX_PIN -1
#define E2_SERIAL_RX_PIN -1
#define E3_SERIAL_TX_PIN -1
#define E3_SERIAL_RX_PIN -1
#define E4_SERIAL_TX_PIN -1
#define E4_SERIAL_RX_PIN -1
#endif
//
// Default pins for TMC software SPI
//
//#if ENABLED(TMC_USE_SW_SPI)
// #ifndef TMC_SW_MOSI
// #define TMC_SW_MOSI 66
// #endif
// #ifndef TMC_SW_MISO
// #define TMC_SW_MISO 44
// #endif
// #ifndef TMC_SW_SCK
// #define TMC_SW_SCK 64
// #endif
//#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN 13
#define TEMP_1_PIN 15
#define TEMP_2_PIN 10
#define TEMP_3_PIN 11
#define TEMP_BED_PIN 14
#if TEMP_SENSOR_CHAMBER > 0
#define TEMP_CHAMBER_PIN 12
#else
#define TEMP_4_PIN 12
#endif
// SPI for Max6675 or Max31855 Thermocouple
//#if DISABLED(SDSUPPORT)
// #define MAX6675_SS 66 // Don't use 53 if there is even the remote possibility of using Display/SD card
//#else
// #define MAX6675_SS 66 // Don't use 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
//#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 10
#define HEATER_1_PIN 7
#define HEATER_2_PIN 44
#define HEATER_BED_PIN 8
#define FAN_PIN 9
#if EXTRUDERS >= 5
#define HEATER_4_PIN 6
#else
#define FAN1_PIN 6
#endif
#if EXTRUDERS >= 4
#define HEATER_3_PIN 45
#else
#define FAN2_PIN 45
#endif
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
//#ifndef FILWIDTH_PIN
// #define FILWIDTH_PIN 5 // Analog Input
//#endif
// DIO 4 (Servos plug) for the runout sensor.
//#define FIL_RUNOUT_PIN SERVO3_PIN
#ifndef PS_ON_PIN
#define PS_ON_PIN 12
#endif
//
// Case Light
//
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) && !defined(SPINDLE_LASER_ENABLE_PIN)
#if !NUM_SERVOS // Prefer the servo connector
#define CASE_LIGHT_PIN 6 // Hardware PWM
#elif HAS_FREE_AUX2_PINS // Try to use AUX 2
#define CASE_LIGHT_PIN 44 // Hardware PWM
#endif
#endif
//
// M3/M4/M5 - Spindle/Laser Control
//
#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#if !NUM_SERVOS // Prefer the servo connector
#define SPINDLE_LASER_ENABLE_PIN 4 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
#define SPINDLE_DIR_PIN 5
#elif HAS_FREE_AUX2_PINS // Try to use AUX 2
#define SPINDLE_LASER_ENABLE_PIN 40 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#define SPINDLE_DIR_PIN 65
#endif
#endif
//
// Průša i3 MK2 Multiplexer Support
//
//#ifndef E_MUX0_PIN
// #define E_MUX0_PIN 58 // Y_CS_PIN
//#endif
//#ifndef E_MUX1_PIN
// #define E_MUX1_PIN 53 // Z_CS_PIN
//#endif
//#ifndef E_MUX2_PIN
// #define E_MUX2_PIN 49 // En_CS_PIN
//#endif
//////////////////////////
// LCDs and Controllers //
//////////////////////////
#if ENABLED(ULTRA_LCD)
//
// LCD Display output pins
//
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock
#elif BOTH(NEWPANEL, PANEL_ONE)
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 65
#define LCD_PINS_D5 66
#define LCD_PINS_D6 44
#define LCD_PINS_D7 64
#elif ENABLED(ZONESTAR_LCD)
#define LCD_PINS_RS 64
#define LCD_PINS_ENABLE 44
#define LCD_PINS_D4 63
#define LCD_PINS_D5 40
#define LCD_PINS_D6 42
#define LCD_PINS_D7 65
#define ADC_KEYPAD_PIN 12
#else
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 25
#if DISABLED(NEWPANEL)
#define BEEPER_PIN 37
#endif
#else
#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
#define LCD_PINS_DC 25 // Set as output on init
#define LCD_PINS_RS 27 // Pull low for 1s to init
// DOGM SPI LCD Support
#define DOGLCD_CS 16
#define DOGLCD_MOSI 17
#define DOGLCD_SCK 23
#define DOGLCD_A0 LCD_PINS_DC
#else
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#endif
#define LCD_PINS_D7 29
#if DISABLED(NEWPANEL)
#define BEEPER_PIN 33
#endif
#endif
#if DISABLED(NEWPANEL)
// Buttons are attached to a shift register
// Not wired yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
#endif
#endif
//
// LCD Display input pins
//
#if ENABLED(NEWPANEL)
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER_PIN 37
#if ENABLED(CR10_STOCKDISPLAY)
#define BTN_EN1 17
#define BTN_EN2 23
#else
#define BTN_EN1 31
#define BTN_EN2 33
#endif
#define BTN_ENC 35
#define SD_DETECT_PIN 49
//#define KILL_PIN 41
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
#define LCD_BACKLIGHT_PIN 39
#endif
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define BTN_EN1 64
#define BTN_EN2 59
#define BTN_ENC 63
#define SD_DETECT_PIN 42
#elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
//#define KILL_PIN 41
#elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
#define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
#define BTN_ENC -1
#define LCD_SDSS 53
#define SD_DETECT_PIN 49
#elif EITHER(VIKI2, miniVIKI)
#define DOGLCD_CS 45
#define DOGLCD_A0 44
#define LCD_SCREEN_ROT_180
#define BEEPER_PIN 33
#define STAT_LED_RED_PIN 32
#define STAT_LED_BLUE_PIN 35
#define BTN_EN1 22
#define BTN_EN2 7
#define BTN_ENC 39
#define SDSS 53
#define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board
//#define KILL_PIN 31
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define BEEPER_PIN 23
#define LCD_BACKLIGHT_PIN 33
#define BTN_EN1 35
#define BTN_EN2 37
#define BTN_ENC 31
#define LCD_SDSS 53
#define SD_DETECT_PIN 49
//#define KILL_PIN 41
#elif ENABLED(MKS_MINI_12864)
#define DOGLCD_A0 27
#define DOGLCD_CS 25
// GLCD features
//#define LCD_CONTRAST 190
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
#define BEEPER_PIN 37
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
//#define SDSS 53
#define SD_DETECT_PIN 49
//#define KILL_PIN 64
#elif ENABLED(MINIPANEL)
#define BEEPER_PIN 42
// not connected to a pin
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define DOGLCD_A0 44
#define DOGLCD_CS 66
// GLCD features
//#define LCD_CONTRAST 190
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
#define BTN_EN1 40
#define BTN_EN2 63
#define BTN_ENC 59
#define SDSS 53
#define SD_DETECT_PIN 49
//#define KILL_PIN 64
#else
// Beeper on AUX-4
#define BEEPER_PIN 33
// Buttons are directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#define SHIFT_OUT 40
#define SHIFT_CLK 44
#define SHIFT_LD 42
#define BTN_EN1 64
#define BTN_EN2 59
#define BTN_ENC 63
#elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7
#else
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31
#endif
#if ENABLED(G3D_PANEL)
#define SD_DETECT_PIN 49
//#define KILL_PIN 41
#endif
#endif
#endif // NEWPANEL
#endif
Write Preview
Loading…
Cancel
Save