LPC1768: Allow I2C master channel override (#16584)
0r31
5 years ago
committed by
Scott Lahteine
parent
0fcf2b1110
commit
451062553e
@ -0,0 +1,71 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* HAL_LPC1768/include/i2c_util.c
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef TARGET_LPC1768
|
||||||
|
|
||||||
|
#include "../../../inc/MarlinConfigPre.h"
|
||||||
|
#include "i2c_util.h"
|
||||||
|
|
||||||
|
#define U8G_I2C_OPT_FAST 16 // from u8g.h
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
void configure_i2c(const uint8_t clock_option) {
|
||||||
|
/**
|
||||||
|
* Init I2C pin connect
|
||||||
|
*/
|
||||||
|
PINSEL_CFG_Type PinCfg;
|
||||||
|
PinCfg.OpenDrain = 0;
|
||||||
|
PinCfg.Pinmode = 0;
|
||||||
|
PinCfg.Portnum = 0;
|
||||||
|
#if USEDI2CDEV_M == 0
|
||||||
|
PinCfg.Funcnum = 1;
|
||||||
|
PinCfg.Pinnum = 27; // SDA0 / D57 AUX-1 ... SCL0 / D58 AUX-1
|
||||||
|
#elif USEDI2CDEV_M == 1
|
||||||
|
PinCfg.Funcnum = 3;
|
||||||
|
PinCfg.Pinnum = 0; // SDA1 / D20 SCA ... SCL1 / D21 SCL
|
||||||
|
#elif USEDI2CDEV_M == 2
|
||||||
|
PinCfg.Funcnum = 2;
|
||||||
|
PinCfg.Pinnum = 10; // SDA2 / D38 X_ENABLE_PIN ... SCL2 / D55 X_DIR_PIN
|
||||||
|
#endif
|
||||||
|
PINSEL_ConfigPin(&PinCfg);
|
||||||
|
PinCfg.Pinnum += 1;
|
||||||
|
PINSEL_ConfigPin(&PinCfg);
|
||||||
|
|
||||||
|
// Initialize I2C peripheral
|
||||||
|
I2C_Init(I2CDEV_M, (clock_option & U8G_I2C_OPT_FAST) ? 400000: 100000); // LCD data rates
|
||||||
|
|
||||||
|
// Enable Master I2C operation
|
||||||
|
I2C_Cmd(I2CDEV_M, I2C_MASTER_MODE, ENABLE);
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // TARGET_LPC1768
|
||||||
@ -0,0 +1,46 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
/**
|
||||||
|
* HAL_LPC1768/include/i2c_util.h
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef USEDI2CDEV_M
|
||||||
|
#define USEDI2CDEV_M 1 // By default use I2C1 controller
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if USEDI2CDEV_M == 0
|
||||||
|
#define I2CDEV_M LPC_I2C0
|
||||||
|
#elif USEDI2CDEV_M == 1
|
||||||
|
#define I2CDEV_M LPC_I2C1
|
||||||
|
#elif USEDI2CDEV_M == 2
|
||||||
|
#define I2CDEV_M LPC_I2C2
|
||||||
|
#else
|
||||||
|
#error "Master I2C device not defined!"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#include <lpc17xx_i2c.h>
|
||||||
|
#include <lpc17xx_pinsel.h>
|
||||||
|
#include <lpc17xx_libcfg_default.h>
|
||||||
|
|
||||||
|
void configure_i2c(const uint8_t clock_option);
|
||||||
@ -1,254 +0,0 @@
|
|||||||
/**
|
|
||||||
* Marlin 3D Printer Firmware
|
|
||||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
||||||
*
|
|
||||||
* Based on Sprinter and grbl.
|
|
||||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
||||||
*
|
|
||||||
* This program is free software: you can redistribute it and/or modify
|
|
||||||
* it under the terms of the GNU General Public License as published by
|
|
||||||
* the Free Software Foundation, either version 3 of the License, or
|
|
||||||
* (at your option) any later version.
|
|
||||||
*
|
|
||||||
* This program is distributed in the hope that it will be useful,
|
|
||||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
* GNU General Public License for more details.
|
|
||||||
*
|
|
||||||
* You should have received a copy of the GNU General Public License
|
|
||||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* Based on U8G2 code - u8x8_byte.c
|
|
||||||
*
|
|
||||||
* Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
|
|
||||||
*
|
|
||||||
* Copyright (c) 2016, olikraus@gmail.com
|
|
||||||
* All rights reserved.
|
|
||||||
*
|
|
||||||
* Redistribution and use in source and binary forms, with or without modification,
|
|
||||||
* are permitted provided that the following conditions are met:
|
|
||||||
*
|
|
||||||
* * Redistributions of source code must retain the above copyright notice, this list
|
|
||||||
* of conditions and the following disclaimer.
|
|
||||||
*
|
|
||||||
* * Redistributions in binary form must reproduce the above copyright notice, this
|
|
||||||
* list of conditions and the following disclaimer in the documentation and/or other
|
|
||||||
* materials provided with the distribution.
|
|
||||||
*
|
|
||||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
|
||||||
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
||||||
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
||||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
||||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
|
|
||||||
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
||||||
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
||||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
||||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
||||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
||||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
||||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
|
||||||
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* Software i2c,
|
|
||||||
* ignores ACK response (which is anyway not provided by some displays)
|
|
||||||
* also does not allow reading from the device
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef TARGET_LPC1768
|
|
||||||
|
|
||||||
#include "../../inc/MarlinConfigPre.h"
|
|
||||||
|
|
||||||
#if HAS_GRAPHICAL_LCD
|
|
||||||
|
|
||||||
#include <U8glib.h>
|
|
||||||
|
|
||||||
//void pinMode(int16_t pin, uint8_t mode);
|
|
||||||
//void digitalWrite(int16_t pin, uint8_t pin_status);
|
|
||||||
|
|
||||||
|
|
||||||
#define I2C_SLA (0x3C*2)
|
|
||||||
//#define I2C_CMD_MODE 0x080
|
|
||||||
#define I2C_CMD_MODE 0x000
|
|
||||||
#define I2C_DATA_MODE 0x040
|
|
||||||
|
|
||||||
//static uint8_t I2C_speed; // 3 - 400KHz, 13 - 100KHz
|
|
||||||
//#define SPEED_400KHz 3
|
|
||||||
//#define SPEED_100KHz 13
|
|
||||||
|
|
||||||
// #define U8G_I2C_OPT_FAST 16
|
|
||||||
|
|
||||||
uint8_t SCL_pin_HAL_LPC1768_sw_I2C, SCL_port_HAL_LPC1768_sw_I2C, SDA_pin_HAL_LPC1768_sw_I2C, SDA_port_HAL_LPC1768_sw_I2C;
|
|
||||||
|
|
||||||
#define SPI_SPEED 2 //20: 200KHz 5:750KHz 2:3-4MHz
|
|
||||||
|
|
||||||
uint8_t u8g_i2c_send_byte_sw(uint8_t data) {
|
|
||||||
for (uint8_t i = 0; i < 9; i++) { // 1 extra bit for the ack/nak
|
|
||||||
|
|
||||||
if (val & 0x80)
|
|
||||||
for (uint8_t j = 0; j < SPI_SPEED; j++) {
|
|
||||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
}
|
|
||||||
else
|
|
||||||
for (uint8_t j = 0; j < SPI_SPEED; j++) {
|
|
||||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
}
|
|
||||||
|
|
||||||
for (uint8_t j = 0; j < SPI_SPEED; j++) {
|
|
||||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
}
|
|
||||||
|
|
||||||
for (uint8_t j = 0; j < SPI_SPEED; j++) {
|
|
||||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
}
|
|
||||||
val <<= 1;
|
|
||||||
}
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
uint8_t u8g_i2c_start_sw(uint8_t sla) { // assert start condition and then send slave address with write bit
|
|
||||||
/* send the start condition, both lines go from 1 to 0 */
|
|
||||||
|
|
||||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
DELAY_US(2);
|
|
||||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
DELAY_US(2);
|
|
||||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
DELAY_US(2);
|
|
||||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
DELAY_US(2);
|
|
||||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
|
|
||||||
|
|
||||||
u8g_i2c_send_byte_sw(I2C_SLA); // send slave address with write bit
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
void u8g_i2c_stop_sw() { }
|
|
||||||
|
|
||||||
void u8g_i2c_init_sw(uint8_t clock_option) { u8g_i2c_start(0); } // send slave address and write bit
|
|
||||||
|
|
||||||
uint8_t u8g_com_ssd_I2C_start_sequence_sw(u8g_t *u8g) {
|
|
||||||
/* are we requested to set the a0 state? */
|
|
||||||
if (u8g->pin_list[U8G_PI_SET_A0] == 0) return 1;
|
|
||||||
|
|
||||||
/* setup bus, might be a repeated start */
|
|
||||||
if (u8g_i2c_start(I2C_SLA) == 0) return 0;
|
|
||||||
if (u8g->pin_list[U8G_PI_A0_STATE] == 0) {
|
|
||||||
if (u8g_i2c_send_byte(I2C_CMD_MODE) == 0) return 0;
|
|
||||||
}
|
|
||||||
else if (u8g_i2c_send_byte(I2C_DATA_MODE) == 0) return 0;
|
|
||||||
|
|
||||||
u8g->pin_list[U8G_PI_SET_A0] = 0;
|
|
||||||
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
uint8_t u8g_com_HAL_LPC1768_ssd_sw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
|
|
||||||
switch (msg) {
|
|
||||||
case U8G_COM_MSG_INIT:
|
|
||||||
|
|
||||||
#define LPC1768_PIN_PORT(pin) ((uint8_t)((pin >> 5) & 0b111))
|
|
||||||
#define LPC1768_PIN_PIN(pin) ((uint8_t)(pin & 0b11111))
|
|
||||||
SCL_pin_HAL_LPC1768_sw_I2C = LPC1768_PIN_PIN(u8g->pin_list[U8G_PI_SCL]);
|
|
||||||
SCL_port_HAL_LPC1768_sw_I2C = LPC1768_PIN_PORT(u8g->pin_list[U8G_PI_SCL]);
|
|
||||||
SDA_pin_HAL_LPC1768_sw_I2C = LPC1768_PIN_PIN(u8g->pin_list[U8G_PI_SDA]);
|
|
||||||
SDA_port_HAL_LPC1768_sw_I2C = LPC1768_PIN_PORT(u8g->pin_list[U8G_PI_SDA]);
|
|
||||||
// As defined by Arduino INPUT(0x0), OUTPUT(0x1), INPUT_PULLUP(0x2)
|
|
||||||
#define OUTPUT 0x1
|
|
||||||
u8g_SetPIOutput(u8g, U8G_PI_SCL);
|
|
||||||
u8g_SetPIOutput(u8g, U8G_PI_SDA);
|
|
||||||
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_CS]) u8g_SetPIOutput(u8g, U8G_PI_CS);
|
|
||||||
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_A0]) u8g_SetPIOutput(u8g, U8G_PI_A0);
|
|
||||||
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPIOutput(u8g, U8G_PI_RESET);
|
|
||||||
|
|
||||||
//u8g_com_arduino_digital_write(u8g, U8G_PI_SCL, HIGH);
|
|
||||||
//u8g_com_arduino_digital_write(u8g, U8G_PI_SDA, HIGH);
|
|
||||||
//u8g->pin_list[U8G_PI_A0_STATE] = 0; /* initial RS state: unknown mode */
|
|
||||||
|
|
||||||
u8g_i2c_init_sw(u8g->pin_list[U8G_PI_I2C_OPTION]);
|
|
||||||
u8g_com_ssd_I2C_start_sequence_sw(u8g);
|
|
||||||
break;
|
|
||||||
|
|
||||||
case U8G_COM_MSG_STOP: break;
|
|
||||||
|
|
||||||
case U8G_COM_MSG_RESET: break;
|
|
||||||
|
|
||||||
case U8G_COM_MSG_CHIP_SELECT:
|
|
||||||
u8g->pin_list[U8G_PI_A0_STATE] = 0;
|
|
||||||
u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again, also forces start condition */
|
|
||||||
if (arg_val == 0) {
|
|
||||||
/* disable chip, send stop condition */
|
|
||||||
u8g_i2c_stop_sw();
|
|
||||||
}
|
|
||||||
else {
|
|
||||||
/* enable, do nothing: any byte writing will trigger the i2c start */
|
|
||||||
}
|
|
||||||
break;
|
|
||||||
|
|
||||||
case U8G_COM_MSG_WRITE_BYTE:
|
|
||||||
//u8g->pin_list[U8G_PI_SET_A0] = 1;
|
|
||||||
//if (u8g_com_arduino_ssd_start_sequence(u8g) == 0)
|
|
||||||
// return u8g_i2c_stop(), 0;
|
|
||||||
if (u8g_i2c_send_byte_sw(arg_val) == 0)
|
|
||||||
return u8g_i2c_stop_sw(), 0;
|
|
||||||
// u8g_i2c_stop();
|
|
||||||
break;
|
|
||||||
|
|
||||||
case U8G_COM_MSG_WRITE_SEQ: {
|
|
||||||
//u8g->pin_list[U8G_PI_SET_A0] = 1;
|
|
||||||
if (u8g_com_ssd_I2C_start_sequence_sw(u8g) == 0)
|
|
||||||
return u8g_i2c_stop_sw(), 0;
|
|
||||||
|
|
||||||
uint8_t *ptr = (uint8_t *)arg_ptr;
|
|
||||||
while (arg_val > 0) {
|
|
||||||
if (u8g_i2c_send_byte_sw(*ptr++) == 0)
|
|
||||||
return u8g_i2c_stop_sw(), 0;
|
|
||||||
arg_val--;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
// u8g_i2c_stop();
|
|
||||||
break;
|
|
||||||
|
|
||||||
case U8G_COM_MSG_WRITE_SEQ_P: {
|
|
||||||
//u8g->pin_list[U8G_PI_SET_A0] = 1;
|
|
||||||
if (u8g_com_ssd_I2C_start_sequence_sw(u8g) == 0)
|
|
||||||
return u8g_i2c_stop_sw(), 0;
|
|
||||||
|
|
||||||
uint8_t *ptr = (uint8_t *)arg_ptr;
|
|
||||||
while (arg_val > 0) {
|
|
||||||
if (u8g_i2c_send_byte_sw(u8g_pgm_read(ptr)) == 0) return 0;
|
|
||||||
ptr++;
|
|
||||||
arg_val--;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
// u8g_i2c_stop();
|
|
||||||
break;
|
|
||||||
|
|
||||||
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
|
|
||||||
u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
|
|
||||||
u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again */
|
|
||||||
u8g_i2c_start_sw(0); // send slave address and write bit
|
|
||||||
u8g_i2c_send_byte_sw(arg_val ? 0x40 : 0x80); // Write to ? Graphics DRAM mode : Command mode
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
#endif // HAS_GRAPHICAL_LCD
|
|
||||||
|
|
||||||
#endif // TARGET_LPC1768
|
|
||||||
Loading…
Reference in New Issue