Add Max7219 LED Matrix Debug Support (#7563)
* Add Max7219 LED Matrix Debug Support The Max7219 8x8 LED Matrix's are very helpful for debugging new code. And for that matter, just trying to maximize printer settings without causing stuttering. The displays are very inexpensive (under $2.00 with shipping) and provide a lot of help when trying to debug complicated code. * Try to keep Makefile up to date.2.0.x
Roxy-3D
7 years ago
committed by
GitHub
parent
ca9734805c
commit
3f0b38ed5d
@ -0,0 +1,286 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* This module is normally not enabled. It can be enabled to facilitate
|
||||
* the display of extra debug information during code development.
|
||||
* It assumes the existance of a Max7219 LED Matrix. A suitable
|
||||
* device can be obtained on eBay similar to this: http://www.ebay.com/itm/191781645249
|
||||
* for under $2.00 including shipping.
|
||||
*
|
||||
* Just connect up +5v and Gnd to give it power. And then 3 wires declared in the
|
||||
* #define's below. Actual pin assignments can be changed in MAX7219_DEBUG section
|
||||
* of configuration_adv.h
|
||||
*
|
||||
* #define Max7219_clock 77
|
||||
* #define Max7219_data_in 78
|
||||
* #define Max7219_load 79
|
||||
*
|
||||
* First call Max7219_init() and then there are a number of support functions available
|
||||
* to control the LED's in the 8x8 grid.
|
||||
*
|
||||
* void Max7219_init();
|
||||
* void Max7219_PutByte(uint8_t data);
|
||||
* void Max7219(uint8_t reg, uint8_t data);
|
||||
* void Max7219_LED_On( int8_t row, int8_t col);
|
||||
* void Max7219_LED_Off( int8_t row, int8_t col);
|
||||
* void Max7219_LED_Toggle( int8_t row, int8_t col);
|
||||
* void Max7219_Clear_Row( int8_t row);
|
||||
* void Max7219_Clear_Column( int8_t col);
|
||||
*/
|
||||
|
||||
|
||||
#include "Marlin.h"
|
||||
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#include "planner.h"
|
||||
#include "stepper.h"
|
||||
#include "Max7219_Debug_LEDs.h"
|
||||
|
||||
static uint8_t LEDs[8] = {0};
|
||||
|
||||
void Max7219_PutByte(uint8_t data) {
|
||||
uint8_t i = 8;
|
||||
while(i > 0) {
|
||||
digitalWrite( Max7219_clock, LOW); // tick
|
||||
if (data & 0x80) // check bit
|
||||
digitalWrite(Max7219_data_in,HIGH); // send 1
|
||||
else
|
||||
digitalWrite(Max7219_data_in,LOW); // send 0
|
||||
digitalWrite(Max7219_clock, HIGH); // tock
|
||||
data = data << 0x01;
|
||||
--i; // move to lesser bit
|
||||
}
|
||||
}
|
||||
|
||||
void Max7219( uint8_t reg, uint8_t data) {
|
||||
digitalWrite(Max7219_load, LOW); // begin
|
||||
Max7219_PutByte(reg); // specify register
|
||||
Max7219_PutByte(data); // put data
|
||||
digitalWrite(Max7219_load, LOW); // and tell the chip to load the data
|
||||
digitalWrite(Max7219_load,HIGH);
|
||||
}
|
||||
|
||||
void Max7219_LED_On( int8_t row, int8_t col) {
|
||||
int x_index;
|
||||
if ( row>=8 || row<0 || col>=8 || col<0)
|
||||
return;
|
||||
if ( LEDs[row] & (0x01<<col) ) // if LED is already on, just leave
|
||||
return;
|
||||
|
||||
LEDs[row] |= (0x01<<col);
|
||||
x_index = 7-row;
|
||||
Max7219( x_index+1, LEDs[row] );
|
||||
}
|
||||
|
||||
void Max7219_LED_Off( int8_t row, int8_t col) {
|
||||
int x_index;
|
||||
if ( row>=8 || row<0 || col>=8 || col<0)
|
||||
return;
|
||||
if ( !(LEDs[row] & (0x01<<col)) ) // if LED is already off, just leave
|
||||
return;
|
||||
|
||||
LEDs[row] ^= (0x01<<col);
|
||||
x_index = 7-row;
|
||||
Max7219( x_index+1, LEDs[row] );
|
||||
}
|
||||
|
||||
void Max7219_LED_Toggle( int8_t row, int8_t col) {
|
||||
if ( row>=8 || row<0 || col>=8 || col<0)
|
||||
return;
|
||||
if ( (LEDs[row] & (0x01<<col)) )
|
||||
Max7219_LED_Off( row, col);
|
||||
else
|
||||
Max7219_LED_On( row, col);
|
||||
}
|
||||
|
||||
void Max7219_Clear_Column( int8_t col) {
|
||||
int x_index;
|
||||
if ( col>=8 || col<0 )
|
||||
return;
|
||||
LEDs[col] = 0;
|
||||
x_index = 7-col;
|
||||
Max7219( x_index+1, LEDs[col] );
|
||||
}
|
||||
|
||||
void Max7219_Clear_Row( int8_t row) {
|
||||
int c;
|
||||
if ( row>=8 || row<0 )
|
||||
return;
|
||||
|
||||
for(c=0; c<8; c++)
|
||||
Max7219_LED_Off( c, row);
|
||||
}
|
||||
|
||||
void Max7219_Set_Row( int8_t row, uint8_t val) {
|
||||
int b;
|
||||
|
||||
if ( row<0 || row>7 )
|
||||
return;
|
||||
|
||||
if ( val<0 || val>255 )
|
||||
return;
|
||||
|
||||
for(b=0; b<8; b++)
|
||||
if ( val & (0x01 << b) )
|
||||
Max7219_LED_On( 7-b, row);
|
||||
else
|
||||
Max7219_LED_Off( 7-b, row);
|
||||
}
|
||||
|
||||
void Max7219_Set_Column( int8_t col, uint8_t val) {
|
||||
int x_index;
|
||||
|
||||
if ( col>=8 || col<0 )
|
||||
return;
|
||||
|
||||
if ( val<0 || val>255 )
|
||||
return;
|
||||
|
||||
LEDs[col] = val;
|
||||
x_index = 7-col;
|
||||
Max7219( x_index+1, LEDs[col] );
|
||||
}
|
||||
|
||||
|
||||
void Max7219_init() {
|
||||
int i, x, y;
|
||||
|
||||
pinMode(Max7219_data_in, OUTPUT);
|
||||
pinMode(Max7219_clock, OUTPUT);
|
||||
pinMode(Max7219_load, OUTPUT);
|
||||
|
||||
digitalWrite(Max7219_load, HIGH);
|
||||
|
||||
//initiation of the max 7219
|
||||
Max7219(max7219_reg_scanLimit, 0x07);
|
||||
Max7219(max7219_reg_decodeMode, 0x00); // using an led matrix (not digits)
|
||||
Max7219(max7219_reg_shutdown, 0x01); // not in shutdown mode
|
||||
Max7219(max7219_reg_displayTest, 0x00); // no display test
|
||||
Max7219(max7219_reg_intensity, 0x01 & 0x0f); // the first 0x0f is the value you can set
|
||||
// range: 0x00 to 0x0f
|
||||
for (i=0; i<8; i++) { // empty registers, turn all LEDs off
|
||||
LEDs[i] = 0x00;
|
||||
Max7219(i+1,0);
|
||||
}
|
||||
|
||||
for(x=0; x<8; x++) { // Do an austetically pleasing pattern to fully test
|
||||
for(y=0; y<8; y++) { // the Max7219 module and LED's. First, turn them
|
||||
Max7219_LED_On( x, y); // all on.
|
||||
delay(3);
|
||||
}
|
||||
}
|
||||
for(x=0; x<8; x++) { // Now, turn them all off.
|
||||
for(y=0; y<8; y++) {
|
||||
Max7219_LED_Off( x, y);
|
||||
delay(3); // delay() is OK here. Max7219_init() is only called from
|
||||
} // setup() and nothing is running yet.
|
||||
}
|
||||
|
||||
delay(150);
|
||||
|
||||
for(x=7; x>=0; x--) { // Now, do the same thing from the opposite direction
|
||||
for(y=0; y<8; y++) {
|
||||
Max7219_LED_On( x, y);
|
||||
delay(2);
|
||||
}
|
||||
}
|
||||
|
||||
for(x=7; x>=0; x--) {
|
||||
for(y=0; y<8; y++) {
|
||||
Max7219_LED_Off( x, y);
|
||||
delay(2);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* These are sample debug features to demonstrate the usage of the 8x8 LED Matrix for debug purposes.
|
||||
* There is very little CPU burden added to the system by displaying information within the idle()
|
||||
* task.
|
||||
*
|
||||
* But with that said, if your debugging can be facilitated by making calls into the library from
|
||||
* other places in the code, feel free to do it. The CPU burden for a few calls to toggle an LED
|
||||
* or clear a row is not very significant.
|
||||
*/
|
||||
void Max7219_idle_tasks() {
|
||||
#ifdef MAX7219_DEBUG_PRINTER_ALIVE
|
||||
static int debug_cnt=0;
|
||||
if (debug_cnt++ > 100) {
|
||||
Max7219_LED_Toggle(7,7);
|
||||
debug_cnt = 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef MAX7219_DEBUG_STEPPER_HEAD
|
||||
Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_HEAD);
|
||||
Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_HEAD+1);
|
||||
if ( planner.block_buffer_head < 8)
|
||||
Max7219_LED_On( planner.block_buffer_head, MAX7219_DEBUG_STEPPER_HEAD);
|
||||
else
|
||||
Max7219_LED_On( planner.block_buffer_head-8, MAX7219_DEBUG_STEPPER_HEAD+1);
|
||||
#endif
|
||||
|
||||
#ifdef MAX7219_DEBUG_STEPPER_TAIL
|
||||
Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_TAIL);
|
||||
Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_TAIL+1);
|
||||
if ( planner.block_buffer_tail < 8)
|
||||
Max7219_LED_On( planner.block_buffer_tail, MAX7219_DEBUG_STEPPER_TAIL );
|
||||
else
|
||||
Max7219_LED_On( planner.block_buffer_tail-8, MAX7219_DEBUG_STEPPER_TAIL+1 );
|
||||
#endif
|
||||
|
||||
#ifdef MAX7219_DEBUG_STEPPER_QUEUE
|
||||
static int16_t last_depth=0, current_depth;
|
||||
uint8_t i;
|
||||
current_depth = planner.block_buffer_head - planner.block_buffer_tail;
|
||||
if (current_depth != last_depth) { // usually, no update will be needed.
|
||||
|
||||
if ( current_depth < 0 )
|
||||
current_depth += BLOCK_BUFFER_SIZE;
|
||||
|
||||
if ( current_depth >= BLOCK_BUFFER_SIZE )
|
||||
current_depth = BLOCK_BUFFER_SIZE;
|
||||
|
||||
if ( current_depth > 16 ) // if the BLOCK_BUFFER_SIZE is greater than 16 two lines
|
||||
current_depth = 16; // of LED's is enough to see if the buffer is draining
|
||||
|
||||
if ( current_depth < last_depth )
|
||||
for(i=current_depth; i<=last_depth; i++) { // clear the highest order LED's
|
||||
if ( i & 1)
|
||||
Max7219_LED_Off(i>>1, MAX7219_DEBUG_STEPPER_QUEUE+1);
|
||||
else
|
||||
Max7219_LED_Off(i>>1, MAX7219_DEBUG_STEPPER_QUEUE+0);
|
||||
}
|
||||
else
|
||||
for(i=last_depth; i<=current_depth; i++) { // light up the highest order LED's
|
||||
if ( i & 1)
|
||||
Max7219_LED_On(i>>1, MAX7219_DEBUG_STEPPER_QUEUE+1);
|
||||
else
|
||||
Max7219_LED_On(i>>1, MAX7219_DEBUG_STEPPER_QUEUE+0);
|
||||
}
|
||||
last_depth = current_depth;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
#endif //MAX7219_DEBUG
|
||||
|
||||
@ -0,0 +1,85 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* This module is normally not enabled and does not generate any code. But it
|
||||
* can be enabled to facilitate the display of extra debug information during
|
||||
* code development. It assumes the existance of a Max7219 LED Matrix. You
|
||||
* can get one on eBay similar to this: http://www.ebay.com/itm/191781645249
|
||||
* for under $2.00 including shipping.
|
||||
*
|
||||
* Just connect up +5v and Gnd to give it power. And then 3 wires declared in the
|
||||
* #define's below. Actual pin assignments can be changed in MAX7219_DEBUG section
|
||||
* of configuration_adv.h
|
||||
*
|
||||
* You first call Max7219_init() and then you have 3 support functions available
|
||||
* to control the LED's in the 8x8 grid.
|
||||
*
|
||||
* void Max7219_init();
|
||||
* void Max7219_PutByte(uint8_t data);
|
||||
* void Max7219(uint8_t reg, uint8_t data);
|
||||
* void Max7219_LED_On( int8_t row, int8_t col);
|
||||
* void Max7219_LED_Off( int8_t row, int8_t col);
|
||||
* void Max7219_LED_Toggle( int8_t row, int8_t col);
|
||||
* void Max7219_Clear_Row( int8_t row);
|
||||
* void Max7219_Clear_Column( int8_t col);
|
||||
* void Max7219_Set_Row( int8_t row, int8_t val);
|
||||
* void Max7219_Set_Column( int8_t column, int8_t val);
|
||||
* void Max7219_idle_tasks();
|
||||
*/
|
||||
|
||||
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
//
|
||||
// define max7219 registers
|
||||
//
|
||||
#define max7219_reg_noop 0x00
|
||||
#define max7219_reg_digit0 0x01
|
||||
#define max7219_reg_digit1 0x02
|
||||
#define max7219_reg_digit2 0x03
|
||||
#define max7219_reg_digit3 0x04
|
||||
#define max7219_reg_digit4 0x05
|
||||
#define max7219_reg_digit5 0x06
|
||||
#define max7219_reg_digit6 0x07
|
||||
#define max7219_reg_digit7 0x08
|
||||
|
||||
#define max7219_reg_intensity 0x0a
|
||||
#define max7219_reg_displayTest 0x0f
|
||||
#define max7219_reg_decodeMode 0x09
|
||||
#define max7219_reg_scanLimit 0x0b
|
||||
#define max7219_reg_shutdown 0x0c
|
||||
|
||||
|
||||
void Max7219_init();
|
||||
void Max7219_PutByte(uint8_t data);
|
||||
void Max7219(uint8_t reg, uint8_t data);
|
||||
void Max7219_LED_On( int8_t row, int8_t col);
|
||||
void Max7219_LED_Off( int8_t row, int8_t col);
|
||||
void Max7219_LED_Toggle( int8_t row, int8_t col);
|
||||
void Max7219_Clear_Row( int8_t row);
|
||||
void Max7219_Clear_Column( int8_t col);
|
||||
void Max7219_Set_Row( int8_t row, uint8_t val);
|
||||
void Max7219_Set_Column( int8_t col, uint8_t val);
|
||||
void Max7219_idle_tasks();
|
||||
#endif
|
||||
|
||||
|
||||
Loading…
Reference in New Issue