microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Add ARC_SEGMENTS_PER_SEC for finer G2/G3 arcs (#16510)

Browse Source
2.0.x
Jamie 5 years ago committed by Scott Lahteine
parent 8a7661df89
commit 36d08f8ad3
133 changed files with 550 additions and 411 deletions
Show Stats Download Patch File Download Diff File

7
Marlin/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

17
Marlin/src/gcode/motion/G2_G3.cpp
Unescape Escape View File

@ -103,7 +103,15 @@ void plan_arc(
mm_of_travel = linear_travel ? HYPOT(flat_mm, linear_travel) : ABS(flat_mm); mm_of_travel = linear_travel ? HYPOT(flat_mm, linear_travel) : ABS(flat_mm);
if (mm_of_travel < 0.001f) return; if (mm_of_travel < 0.001f) return;
uint16_t segments = FLOOR(mm_of_travel / (MM_PER_ARC_SEGMENT)); const feedRate_t scaled_fr_mm_s = MMS_SCALED(feedrate_mm_s);
#ifdef ARC_SEGMENTS_PER_SEC
float seg_length = scaled_fr_mm_s * _RECIP(ARC_SEGMENTS_PER_SEC);
NOLESS(seg_length, MM_PER_ARC_SEGMENT);
#else
constexpr float seg_length = MM_PER_ARC_SEGMENT;
#endif
uint16_t segments = FLOOR(mm_of_travel / seg_length);
NOLESS(segments, min_segments); NOLESS(segments, min_segments);
/** /**
@ -146,10 +154,9 @@ void plan_arc(
// Initialize the extruder axis // Initialize the extruder axis
raw.e = current_position.e; raw.e = current_position.e;
const feedRate_t scaled_fr_mm_s = MMS_SCALED(feedrate_mm_s);
#if ENABLED(SCARA_FEEDRATE_SCALING) #if ENABLED(SCARA_FEEDRATE_SCALING)
const float inv_duration = scaled_fr_mm_s / MM_PER_ARC_SEGMENT; const float inv_duration = scaled_fr_mm_s / seg_length;
#endif #endif
millis_t next_idle_ms = millis() + 200UL; millis_t next_idle_ms = millis() + 200UL;
@ -206,7 +213,7 @@ void plan_arc(
planner.apply_leveling(raw); planner.apply_leveling(raw);
#endif #endif
if (!planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, MM_PER_ARC_SEGMENT if (!planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, seg_length
#if ENABLED(SCARA_FEEDRATE_SCALING) #if ENABLED(SCARA_FEEDRATE_SCALING)
, inv_duration , inv_duration
#endif #endif
@ -226,7 +233,7 @@ void plan_arc(
planner.apply_leveling(raw); planner.apply_leveling(raw);
#endif #endif
planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, MM_PER_ARC_SEGMENT planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, seg_length
#if ENABLED(SCARA_FEEDRATE_SCALING) #if ENABLED(SCARA_FEEDRATE_SCALING)
, inv_duration , inv_duration
#endif #endif

7
config/default/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/AlephObjects/TAZ4/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
Unescape Escape View File

@ -1531,9 +1531,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Alfawise/U20/Configuration_adv.h
Unescape Escape View File

@ -1530,9 +1530,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/AliExpress/UM2pExt/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Anet/A2/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Anet/A2plus/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Anet/A6/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes //#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Anet/A8/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes //#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Anet/A8plus/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes //#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Anet/E10/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes //#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Anet/E16/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes //#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/AnyCubic/i3/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/ArmEd/Configuration_adv.h
Unescape Escape View File

@ -1533,9 +1533,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Artillery/Genius/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Artillery/Sidewinder X1/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/BIBO/TouchX/default/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/BQ/Hephestos/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/BQ/Hephestos_2/Configuration_adv.h
Unescape Escape View File

@ -1537,9 +1537,10 @@
// //
//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes //#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/BQ/WITBOX/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes //#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes //#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Cartesio/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Creality/CR-10/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes //#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Creality/CR-10S/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Creality/CR-10_5S/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Creality/CR-10mini/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Creality/CR-20 Pro/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Creality/CR-20/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Creality/CR-8/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Creality/Ender-2/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Creality/Ender-3/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Creality/Ender-4/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Creality/Ender-5 Pro/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Creality/Ender-5/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

11
config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h
Unescape Escape View File

@ -1529,11 +1529,12 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.

7
config/examples/Einstart-S/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/FYSETC/AIO_II/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/FYSETC/Cheetah/base/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/FYSETC/F6_13/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/FYSETC/S6/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Felix/DUAL/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Felix/Single/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/FlashForge/CreatorPro/Configuration_adv.h
Unescape Escape View File

@ -1528,9 +1528,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/FolgerTech/i3-2020/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Formbot/Raptor/Configuration_adv.h
Unescape Escape View File

@ -1531,9 +1531,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Formbot/T_Rex_2+/Configuration_adv.h
Unescape Escape View File

@ -1533,9 +1533,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Formbot/T_Rex_3/Configuration_adv.h
Unescape Escape View File

@ -1533,9 +1533,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Geeetech/A10/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Geeetech/A10D/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Geeetech/A10M/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Geeetech/A10T/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Geeetech/A20/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Geeetech/A20M/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Geeetech/A20T/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

11
config/examples/Geeetech/A30/Configuration_adv.h
Unescape Escape View File

@ -1529,11 +1529,12 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers

11
config/examples/Geeetech/D200/Configuration_adv.h
Unescape Escape View File

@ -1529,11 +1529,12 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers

11
config/examples/Geeetech/E180/Configuration_adv.h
Unescape Escape View File

@ -1529,11 +1529,12 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers

11
config/examples/Geeetech/M201/Configuration_adv.h
Unescape Escape View File

@ -1529,11 +1529,12 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers

7
config/examples/Geeetech/MeCreator2/Configuration_adv.h
Unescape Escape View File

@ -1528,9 +1528,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Geeetech/PI3A PRO/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/HMS434/Configuration_adv.h
Unescape Escape View File

@ -1521,9 +1521,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Infitary/i3-M508/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/JGAurora/A1/Configuration_adv.h
Unescape Escape View File

@ -1534,9 +1534,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/JGAurora/A5/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes //#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/JGAurora/A5S/Configuration_adv.h
Unescape Escape View File

@ -1534,9 +1534,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/JGAurora/Magic/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/MakerFarm/Pegasus_12/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes //#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/MakerParts/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Malyan/M150/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Malyan/M200/Configuration_adv.h
Unescape Escape View File

@ -1531,9 +1531,10 @@
// //
//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes //#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Micromake/C1/enhanced/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Mks/Robin/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Mks/Sbase/Configuration_adv.h
Unescape Escape View File

@ -1530,9 +1530,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Modix/Big60/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/RapideLite/RL200/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Renkforce/RF100/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Renkforce/RF100XL/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Renkforce/RF100v2/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/RigidBot/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/SCARA/MP_SCARA/Configuration_adv.h
Unescape Escape View File

@ -1396,9 +1396,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/SCARA/Morgan/Configuration_adv.h
Unescape Escape View File

@ -1526,9 +1526,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Sanguinololu/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Tevo/Michelangelo/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Tevo/Nereus/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Tevo/Tarantula Pro/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

7
config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
Unescape Escape View File

@ -1529,9 +1529,10 @@
// //
//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes //#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
#define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif #endif

Some files were not shown because too many files have changed in this diff Show More

Write Preview
Loading…
Cancel
Save