Split up sdcard G-codes
Scott Lahteine
6 years ago
parent
3f36a38512
commit
35ae5daf2d
@ -1,303 +0,0 @@
|
|||||||
/**
|
|
||||||
* Marlin 3D Printer Firmware
|
|
||||||
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
||||||
*
|
|
||||||
* Based on Sprinter and grbl.
|
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
||||||
*
|
|
||||||
* This program is free software: you can redistribute it and/or modify
|
|
||||||
* it under the terms of the GNU General Public License as published by
|
|
||||||
* the Free Software Foundation, either version 3 of the License, or
|
|
||||||
* (at your option) any later version.
|
|
||||||
*
|
|
||||||
* This program is distributed in the hope that it will be useful,
|
|
||||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
* GNU General Public License for more details.
|
|
||||||
*
|
|
||||||
* You should have received a copy of the GNU General Public License
|
|
||||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include "../../inc/MarlinConfig.h"
|
|
||||||
|
|
||||||
#if ENABLED(SDSUPPORT)
|
|
||||||
|
|
||||||
#include "../gcode.h"
|
|
||||||
#include "../../sd/cardreader.h"
|
|
||||||
#include "../../module/printcounter.h"
|
|
||||||
#include "../../module/stepper.h"
|
|
||||||
#include "../../lcd/ultralcd.h"
|
|
||||||
|
|
||||||
#if ENABLED(POWER_LOSS_RECOVERY)
|
|
||||||
#include "../../feature/power_loss_recovery.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(PARK_HEAD_ON_PAUSE)
|
|
||||||
#include "../../feature/pause.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(PARK_HEAD_ON_PAUSE) || NUM_SERIAL > 1
|
|
||||||
#include "../queue.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(HOST_ACTION_COMMANDS)
|
|
||||||
#include "../../feature/host_actions.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/**
|
|
||||||
* M20: List SD card to serial output
|
|
||||||
*/
|
|
||||||
void GcodeSuite::M20() {
|
|
||||||
SERIAL_ECHOLNPGM(MSG_BEGIN_FILE_LIST);
|
|
||||||
card.ls();
|
|
||||||
SERIAL_ECHOLNPGM(MSG_END_FILE_LIST);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* M21: Init SD Card
|
|
||||||
*/
|
|
||||||
void GcodeSuite::M21() { card.initsd(); }
|
|
||||||
|
|
||||||
/**
|
|
||||||
* M22: Release SD Card
|
|
||||||
*/
|
|
||||||
void GcodeSuite::M22() { card.release(); }
|
|
||||||
|
|
||||||
/**
|
|
||||||
* M23: Open a file
|
|
||||||
*/
|
|
||||||
void GcodeSuite::M23() {
|
|
||||||
#if ENABLED(POWER_LOSS_RECOVERY)
|
|
||||||
card.removeJobRecoveryFile();
|
|
||||||
#endif
|
|
||||||
// Simplify3D includes the size, so zero out all spaces (#7227)
|
|
||||||
for (char *fn = parser.string_arg; *fn; ++fn) if (*fn == ' ') *fn = '\0';
|
|
||||||
card.openFile(parser.string_arg, true);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* M24: Start or Resume SD Print
|
|
||||||
*/
|
|
||||||
void GcodeSuite::M24() {
|
|
||||||
|
|
||||||
#if ENABLED(POWER_LOSS_RECOVERY)
|
|
||||||
if (parser.seenval('S')) card.setIndex(parser.value_long());
|
|
||||||
if (parser.seenval('T')) print_job_timer.resume(parser.value_long());
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(PARK_HEAD_ON_PAUSE)
|
|
||||||
if (did_pause_print) {
|
|
||||||
resume_print();
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
if (card.isFileOpen()) {
|
|
||||||
card.startFileprint();
|
|
||||||
print_job_timer.start();
|
|
||||||
}
|
|
||||||
|
|
||||||
#if ENABLED(HOST_ACTION_COMMANDS)
|
|
||||||
#if ENABLED(HOST_PROMPT_SUPPORT)
|
|
||||||
host_prompt_open(PROMPT_INFO, PSTR("Resume SD"));
|
|
||||||
#endif
|
|
||||||
#ifdef ACTION_ON_RESUME
|
|
||||||
host_action_resume();
|
|
||||||
#endif
|
|
||||||
#endif
|
|
||||||
|
|
||||||
ui.reset_status();
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* M25: Pause SD Print
|
|
||||||
*/
|
|
||||||
void GcodeSuite::M25() {
|
|
||||||
|
|
||||||
// Set initial pause flag to prevent more commands from landing in the queue while we try to pause
|
|
||||||
#if ENABLED(SDSUPPORT)
|
|
||||||
if (IS_SD_PRINTING()) card.pauseSDPrint();
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(PARK_HEAD_ON_PAUSE)
|
|
||||||
|
|
||||||
M125();
|
|
||||||
|
|
||||||
#else
|
|
||||||
|
|
||||||
print_job_timer.pause();
|
|
||||||
ui.reset_status();
|
|
||||||
|
|
||||||
#if ENABLED(HOST_ACTION_COMMANDS)
|
|
||||||
#if ENABLED(HOST_PROMPT_SUPPORT)
|
|
||||||
host_prompt_open(PROMPT_PAUSE_RESUME, PSTR("Pause SD"), PSTR("Resume"));
|
|
||||||
#endif
|
|
||||||
#ifdef ACTION_ON_PAUSE
|
|
||||||
host_action_pause();
|
|
||||||
#endif
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* M26: Set SD Card file index
|
|
||||||
*/
|
|
||||||
void GcodeSuite::M26() {
|
|
||||||
if (card.isDetected() && parser.seenval('S'))
|
|
||||||
card.setIndex(parser.value_long());
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* M27: Get SD Card status
|
|
||||||
* OR, with 'S<seconds>' set the SD status auto-report interval. (Requires AUTO_REPORT_SD_STATUS)
|
|
||||||
* OR, with 'C' get the current filename.
|
|
||||||
*/
|
|
||||||
void GcodeSuite::M27() {
|
|
||||||
if (parser.seen('C')) {
|
|
||||||
SERIAL_ECHOPGM("Current file: ");
|
|
||||||
card.printFilename();
|
|
||||||
}
|
|
||||||
|
|
||||||
#if ENABLED(AUTO_REPORT_SD_STATUS)
|
|
||||||
else if (parser.seenval('S'))
|
|
||||||
card.set_auto_report_interval(parser.value_byte());
|
|
||||||
#endif
|
|
||||||
|
|
||||||
else
|
|
||||||
card.report_status();
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* M28: Start SD Write
|
|
||||||
*/
|
|
||||||
void GcodeSuite::M28() {
|
|
||||||
|
|
||||||
#if ENABLED(BINARY_FILE_TRANSFER)
|
|
||||||
|
|
||||||
bool binary_mode = false;
|
|
||||||
char *p = parser.string_arg;
|
|
||||||
if (p[0] == 'B' && NUMERIC(p[1])) {
|
|
||||||
binary_mode = p[1] > '0';
|
|
||||||
p += 2;
|
|
||||||
while (*p == ' ') ++p;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Binary transfer mode
|
|
||||||
if ((card.flag.binary_mode = binary_mode)) {
|
|
||||||
SERIAL_ECHO_START();
|
|
||||||
SERIAL_ECHO(" preparing to receive: ");
|
|
||||||
SERIAL_ECHOLN(p);
|
|
||||||
card.openFile(p, false);
|
|
||||||
#if NUM_SERIAL > 1
|
|
||||||
card.transfer_port_index = command_queue_port[cmd_queue_index_r];
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
else
|
|
||||||
card.openFile(p, false);
|
|
||||||
|
|
||||||
#else
|
|
||||||
|
|
||||||
card.openFile(parser.string_arg, false);
|
|
||||||
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* M29: Stop SD Write
|
|
||||||
* Processed in write to file routine
|
|
||||||
*/
|
|
||||||
void GcodeSuite::M29() {
|
|
||||||
card.flag.saving = false;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* M30 <filename>: Delete SD Card file
|
|
||||||
*/
|
|
||||||
void GcodeSuite::M30() {
|
|
||||||
if (card.isDetected()) {
|
|
||||||
card.closefile();
|
|
||||||
card.removeFile(parser.string_arg);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* M32: Select file and start SD Print
|
|
||||||
*
|
|
||||||
* Examples:
|
|
||||||
*
|
|
||||||
* M32 !PATH/TO/FILE.GCO# ; Start FILE.GCO
|
|
||||||
* M32 P !PATH/TO/FILE.GCO# ; Start FILE.GCO as a procedure
|
|
||||||
* M32 S60 !PATH/TO/FILE.GCO# ; Start FILE.GCO at byte 60
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
void GcodeSuite::M32() {
|
|
||||||
if (IS_SD_PRINTING()) planner.synchronize();
|
|
||||||
|
|
||||||
if (card.isDetected()) {
|
|
||||||
const bool call_procedure = parser.boolval('P');
|
|
||||||
|
|
||||||
card.openFile(parser.string_arg, true, call_procedure);
|
|
||||||
|
|
||||||
if (parser.seenval('S')) card.setIndex(parser.value_long());
|
|
||||||
|
|
||||||
card.startFileprint();
|
|
||||||
|
|
||||||
// Procedure calls count as normal print time.
|
|
||||||
if (!call_procedure) print_job_timer.start();
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* M33: Get the long full path of a file or folder
|
|
||||||
*
|
|
||||||
* Parameters:
|
|
||||||
* <dospath> Case-insensitive DOS-style path to a file or folder
|
|
||||||
*
|
|
||||||
* Example:
|
|
||||||
* M33 miscel~1/armchair/armcha~1.gco
|
|
||||||
*
|
|
||||||
* Output:
|
|
||||||
* /Miscellaneous/Armchair/Armchair.gcode
|
|
||||||
*/
|
|
||||||
void GcodeSuite::M33() {
|
|
||||||
card.printLongPath(parser.string_arg);
|
|
||||||
}
|
|
||||||
|
|
||||||
#endif // LONG_FILENAME_HOST_SUPPORT
|
|
||||||
|
|
||||||
#if ENABLED(SDCARD_SORT_ALPHA) && ENABLED(SDSORT_GCODE)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* M34: Set SD Card Sorting Options
|
|
||||||
*/
|
|
||||||
void GcodeSuite::M34() {
|
|
||||||
if (parser.seen('S')) card.setSortOn(parser.value_bool());
|
|
||||||
if (parser.seenval('F')) {
|
|
||||||
const int v = parser.value_long();
|
|
||||||
card.setSortFolders(v < 0 ? -1 : v > 0 ? 1 : 0);
|
|
||||||
}
|
|
||||||
//if (parser.seen('R')) card.setSortReverse(parser.value_bool());
|
|
||||||
}
|
|
||||||
|
|
||||||
#endif // SDCARD_SORT_ALPHA && SDSORT_GCODE
|
|
||||||
|
|
||||||
/**
|
|
||||||
* M524: Abort the current SD print job (started with M24)
|
|
||||||
*/
|
|
||||||
void GcodeSuite::M524() {
|
|
||||||
if (IS_SD_PRINTING()) card.flag.abort_sd_printing = true;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* M928: Start SD Write
|
|
||||||
*/
|
|
||||||
void GcodeSuite::M928() {
|
|
||||||
card.openLogFile(parser.string_arg);
|
|
||||||
}
|
|
||||||
|
|
||||||
#endif // SDSUPPORT
|
|
||||||
@ -0,0 +1,39 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "../../inc/MarlinConfig.h"
|
||||||
|
|
||||||
|
#if ENABLED(SDSUPPORT)
|
||||||
|
|
||||||
|
#include "../gcode.h"
|
||||||
|
#include "../../sd/cardreader.h"
|
||||||
|
|
||||||
|
/**
|
||||||
|
* M20: List SD card to serial output
|
||||||
|
*/
|
||||||
|
void GcodeSuite::M20() {
|
||||||
|
SERIAL_ECHOLNPGM(MSG_BEGIN_FILE_LIST);
|
||||||
|
card.ls();
|
||||||
|
SERIAL_ECHOLNPGM(MSG_END_FILE_LIST);
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
@ -0,0 +1,40 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "../../inc/MarlinConfig.h"
|
||||||
|
|
||||||
|
#if ENABLED(SDSUPPORT)
|
||||||
|
|
||||||
|
#include "../gcode.h"
|
||||||
|
#include "../../sd/cardreader.h"
|
||||||
|
|
||||||
|
/**
|
||||||
|
* M21: Init SD Card
|
||||||
|
*/
|
||||||
|
void GcodeSuite::M21() { card.initsd(); }
|
||||||
|
|
||||||
|
/**
|
||||||
|
* M22: Release SD Card
|
||||||
|
*/
|
||||||
|
void GcodeSuite::M22() { card.release(); }
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
@ -0,0 +1,42 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "../../inc/MarlinConfig.h"
|
||||||
|
|
||||||
|
#if ENABLED(SDSUPPORT)
|
||||||
|
|
||||||
|
#include "../gcode.h"
|
||||||
|
#include "../../sd/cardreader.h"
|
||||||
|
|
||||||
|
/**
|
||||||
|
* M23: Open a file
|
||||||
|
*/
|
||||||
|
void GcodeSuite::M23() {
|
||||||
|
#if ENABLED(POWER_LOSS_RECOVERY)
|
||||||
|
card.removeJobRecoveryFile();
|
||||||
|
#endif
|
||||||
|
// Simplify3D includes the size, so zero out all spaces (#7227)
|
||||||
|
for (char *fn = parser.string_arg; *fn; ++fn) if (*fn == ' ') *fn = '\0';
|
||||||
|
card.openFile(parser.string_arg, true);
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
@ -0,0 +1,106 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "../../inc/MarlinConfig.h"
|
||||||
|
|
||||||
|
#if ENABLED(SDSUPPORT)
|
||||||
|
|
||||||
|
#include "../gcode.h"
|
||||||
|
#include "../../sd/cardreader.h"
|
||||||
|
#include "../../module/printcounter.h"
|
||||||
|
#include "../../lcd/ultralcd.h"
|
||||||
|
|
||||||
|
#if ENABLED(PARK_HEAD_ON_PAUSE)
|
||||||
|
#include "../../feature/pause.h"
|
||||||
|
#include "../queue.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(HOST_ACTION_COMMANDS)
|
||||||
|
#include "../../feature/host_actions.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* M24: Start or Resume SD Print
|
||||||
|
*/
|
||||||
|
void GcodeSuite::M24() {
|
||||||
|
|
||||||
|
#if ENABLED(POWER_LOSS_RECOVERY)
|
||||||
|
if (parser.seenval('S')) card.setIndex(parser.value_long());
|
||||||
|
if (parser.seenval('T')) print_job_timer.resume(parser.value_long());
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(PARK_HEAD_ON_PAUSE)
|
||||||
|
if (did_pause_print) {
|
||||||
|
resume_print();
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
if (card.isFileOpen()) {
|
||||||
|
card.startFileprint();
|
||||||
|
print_job_timer.start();
|
||||||
|
}
|
||||||
|
|
||||||
|
#if ENABLED(HOST_ACTION_COMMANDS)
|
||||||
|
#if ENABLED(HOST_PROMPT_SUPPORT)
|
||||||
|
host_prompt_open(PROMPT_INFO, PSTR("Resume SD"));
|
||||||
|
#endif
|
||||||
|
#ifdef ACTION_ON_RESUME
|
||||||
|
host_action_resume();
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
ui.reset_status();
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* M25: Pause SD Print
|
||||||
|
*/
|
||||||
|
void GcodeSuite::M25() {
|
||||||
|
|
||||||
|
// Set initial pause flag to prevent more commands from landing in the queue while we try to pause
|
||||||
|
#if ENABLED(SDSUPPORT)
|
||||||
|
if (IS_SD_PRINTING()) card.pauseSDPrint();
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(PARK_HEAD_ON_PAUSE)
|
||||||
|
|
||||||
|
M125();
|
||||||
|
|
||||||
|
#else
|
||||||
|
|
||||||
|
print_job_timer.pause();
|
||||||
|
ui.reset_status();
|
||||||
|
|
||||||
|
#if ENABLED(HOST_ACTION_COMMANDS)
|
||||||
|
#if ENABLED(HOST_PROMPT_SUPPORT)
|
||||||
|
host_prompt_open(PROMPT_PAUSE_RESUME, PSTR("Pause SD"), PSTR("Resume"));
|
||||||
|
#endif
|
||||||
|
#ifdef ACTION_ON_PAUSE
|
||||||
|
host_action_pause();
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
@ -0,0 +1,38 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "../../inc/MarlinConfig.h"
|
||||||
|
|
||||||
|
#if ENABLED(SDSUPPORT)
|
||||||
|
|
||||||
|
#include "../gcode.h"
|
||||||
|
#include "../../sd/cardreader.h"
|
||||||
|
|
||||||
|
/**
|
||||||
|
* M26: Set SD Card file index
|
||||||
|
*/
|
||||||
|
void GcodeSuite::M26() {
|
||||||
|
if (card.isDetected() && parser.seenval('S'))
|
||||||
|
card.setIndex(parser.value_long());
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
@ -0,0 +1,50 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "../../inc/MarlinConfig.h"
|
||||||
|
|
||||||
|
#if ENABLED(SDSUPPORT)
|
||||||
|
|
||||||
|
#include "../gcode.h"
|
||||||
|
#include "../../sd/cardreader.h"
|
||||||
|
|
||||||
|
/**
|
||||||
|
* M27: Get SD Card status
|
||||||
|
* OR, with 'S<seconds>' set the SD status auto-report interval. (Requires AUTO_REPORT_SD_STATUS)
|
||||||
|
* OR, with 'C' get the current filename.
|
||||||
|
*/
|
||||||
|
void GcodeSuite::M27() {
|
||||||
|
if (parser.seen('C')) {
|
||||||
|
SERIAL_ECHOPGM("Current file: ");
|
||||||
|
card.printFilename();
|
||||||
|
}
|
||||||
|
|
||||||
|
#if ENABLED(AUTO_REPORT_SD_STATUS)
|
||||||
|
else if (parser.seenval('S'))
|
||||||
|
card.set_auto_report_interval(parser.value_byte());
|
||||||
|
#endif
|
||||||
|
|
||||||
|
else
|
||||||
|
card.report_status();
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
@ -0,0 +1,73 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "../../inc/MarlinConfig.h"
|
||||||
|
|
||||||
|
#if ENABLED(SDSUPPORT)
|
||||||
|
|
||||||
|
#include "../gcode.h"
|
||||||
|
#include "../../sd/cardreader.h"
|
||||||
|
|
||||||
|
/**
|
||||||
|
* M28: Start SD Write
|
||||||
|
*/
|
||||||
|
void GcodeSuite::M28() {
|
||||||
|
|
||||||
|
#if ENABLED(BINARY_FILE_TRANSFER)
|
||||||
|
|
||||||
|
bool binary_mode = false;
|
||||||
|
char *p = parser.string_arg;
|
||||||
|
if (p[0] == 'B' && NUMERIC(p[1])) {
|
||||||
|
binary_mode = p[1] > '0';
|
||||||
|
p += 2;
|
||||||
|
while (*p == ' ') ++p;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Binary transfer mode
|
||||||
|
if ((card.flag.binary_mode = binary_mode)) {
|
||||||
|
SERIAL_ECHO_START();
|
||||||
|
SERIAL_ECHO(" preparing to receive: ");
|
||||||
|
SERIAL_ECHOLN(p);
|
||||||
|
card.openFile(p, false);
|
||||||
|
#if NUM_SERIAL > 1
|
||||||
|
card.transfer_port_index = command_queue_port[cmd_queue_index_r];
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
else
|
||||||
|
card.openFile(p, false);
|
||||||
|
|
||||||
|
#else
|
||||||
|
|
||||||
|
card.openFile(parser.string_arg, false);
|
||||||
|
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* M29: Stop SD Write
|
||||||
|
* (Processed in write-to-file routine)
|
||||||
|
*/
|
||||||
|
void GcodeSuite::M29() {
|
||||||
|
card.flag.saving = false;
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
@ -0,0 +1,40 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "../../inc/MarlinConfig.h"
|
||||||
|
|
||||||
|
#if ENABLED(SDSUPPORT)
|
||||||
|
|
||||||
|
#include "../gcode.h"
|
||||||
|
#include "../../sd/cardreader.h"
|
||||||
|
|
||||||
|
/**
|
||||||
|
* M30 <filename>: Delete SD Card file
|
||||||
|
*/
|
||||||
|
void GcodeSuite::M30() {
|
||||||
|
if (card.isDetected()) {
|
||||||
|
card.closefile();
|
||||||
|
card.removeFile(parser.string_arg);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
@ -0,0 +1,59 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "../../inc/MarlinConfig.h"
|
||||||
|
|
||||||
|
#if ENABLED(SDSUPPORT)
|
||||||
|
|
||||||
|
#include "../gcode.h"
|
||||||
|
#include "../../sd/cardreader.h"
|
||||||
|
#include "../../module/printcounter.h"
|
||||||
|
#include "../../module/planner.h"
|
||||||
|
|
||||||
|
/**
|
||||||
|
* M32: Select file and start SD Print
|
||||||
|
*
|
||||||
|
* Examples:
|
||||||
|
*
|
||||||
|
* M32 !PATH/TO/FILE.GCO# ; Start FILE.GCO
|
||||||
|
* M32 P !PATH/TO/FILE.GCO# ; Start FILE.GCO as a procedure
|
||||||
|
* M32 S60 !PATH/TO/FILE.GCO# ; Start FILE.GCO at byte 60
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
void GcodeSuite::M32() {
|
||||||
|
if (IS_SD_PRINTING()) planner.synchronize();
|
||||||
|
|
||||||
|
if (card.isDetected()) {
|
||||||
|
const bool call_procedure = parser.boolval('P');
|
||||||
|
|
||||||
|
card.openFile(parser.string_arg, true, call_procedure);
|
||||||
|
|
||||||
|
if (parser.seenval('S')) card.setIndex(parser.value_long());
|
||||||
|
|
||||||
|
card.startFileprint();
|
||||||
|
|
||||||
|
// Procedure calls count as normal print time.
|
||||||
|
if (!call_procedure) print_job_timer.start();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
@ -0,0 +1,48 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "../../inc/MarlinConfig.h"
|
||||||
|
|
||||||
|
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
|
||||||
|
|
||||||
|
#include "../gcode.h"
|
||||||
|
#include "../../sd/cardreader.h"
|
||||||
|
|
||||||
|
/**
|
||||||
|
* M33: Get the long full path of a file or folder
|
||||||
|
*
|
||||||
|
* Parameters:
|
||||||
|
* <dospath> Case-insensitive DOS-style path to a file or folder
|
||||||
|
*
|
||||||
|
* Example:
|
||||||
|
* M33 miscel~1/armchair/armcha~1.gco
|
||||||
|
*
|
||||||
|
* Output:
|
||||||
|
* /Miscellaneous/Armchair/Armchair.gcode
|
||||||
|
*/
|
||||||
|
void GcodeSuite::M33() {
|
||||||
|
|
||||||
|
card.printLongPath(parser.string_arg);
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // LONG_FILENAME_HOST_SUPPORT
|
||||||
@ -0,0 +1,42 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "../../inc/MarlinConfig.h"
|
||||||
|
|
||||||
|
#if ENABLED(SDCARD_SORT_ALPHA) && ENABLED(SDSORT_GCODE)
|
||||||
|
|
||||||
|
#include "../gcode.h"
|
||||||
|
#include "../../sd/cardreader.h"
|
||||||
|
|
||||||
|
/**
|
||||||
|
* M34: Set SD Card Sorting Options
|
||||||
|
*/
|
||||||
|
void GcodeSuite::M34() {
|
||||||
|
if (parser.seen('S')) card.setSortOn(parser.value_bool());
|
||||||
|
if (parser.seenval('F')) {
|
||||||
|
const int v = parser.value_long();
|
||||||
|
card.setSortFolders(v < 0 ? -1 : v > 0 ? 1 : 0);
|
||||||
|
}
|
||||||
|
//if (parser.seen('R')) card.setSortReverse(parser.value_bool());
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // SDCARD_SORT_ALPHA && SDSORT_GCODE
|
||||||
@ -0,0 +1,40 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "../../inc/MarlinConfig.h"
|
||||||
|
|
||||||
|
#if ENABLED(SDSUPPORT)
|
||||||
|
|
||||||
|
#include "../gcode.h"
|
||||||
|
#include "../../sd/cardreader.h"
|
||||||
|
|
||||||
|
/**
|
||||||
|
* M524: Abort the current SD print job (started with M24)
|
||||||
|
*/
|
||||||
|
void GcodeSuite::M524() {
|
||||||
|
|
||||||
|
if (IS_SD_PRINTING())
|
||||||
|
card.flag.abort_sd_printing = true;
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
@ -0,0 +1,39 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "../../inc/MarlinConfig.h"
|
||||||
|
|
||||||
|
#if ENABLED(SDSUPPORT)
|
||||||
|
|
||||||
|
#include "../gcode.h"
|
||||||
|
#include "../../sd/cardreader.h"
|
||||||
|
|
||||||
|
/**
|
||||||
|
* M928: Start SD Logging
|
||||||
|
*/
|
||||||
|
void GcodeSuite::M928() {
|
||||||
|
|
||||||
|
card.openLogFile(parser.string_arg);
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
Loading…
Reference in New Issue