microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Support for distinct E factors

Browse Source
2.0.x
Scott Lahteine 8 years ago
parent 0dfe95eaba
commit 3391c785c6
28 changed files with 400 additions and 117 deletions
Show Stats Download Patch File Download Diff File

14
Marlin/Conditionals_LCD.h
Unescape Escape View File

@ -286,7 +286,7 @@
* HOTENDS - Number of hotends, whether connected or separate * HOTENDS - Number of hotends, whether connected or separate
* E_STEPPERS - Number of actual E stepper motors * E_STEPPERS - Number of actual E stepper motors
* TOOL_E_INDEX - Index to use when getting/setting the tool state * TOOL_E_INDEX - Index to use when getting/setting the tool state
* *
*/ */
#if ENABLED(SINGLENOZZLE) // One hotend, multi-extruder #if ENABLED(SINGLENOZZLE) // One hotend, multi-extruder
#define HOTENDS 1 #define HOTENDS 1
@ -316,6 +316,18 @@
#define TOOL_E_INDEX current_block->active_extruder #define TOOL_E_INDEX current_block->active_extruder
#endif #endif
/**
* Distinct E Factors – Disable by commenting out DISTINCT_E_FACTORS
*/
#if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1
#define XYZE_N (XYZ + E_STEPPERS)
#define E_AXIS_N (E_AXIS + extruder)
#else
#undef DISTINCT_E_FACTORS
#define XYZE_N XYZE
#define E_AXIS_N E_AXIS
#endif
/** /**
* The BLTouch Probe emulates a servo probe * The BLTouch Probe emulates a servo probe
* and uses "special" angles for its state. * and uses "special" angles for its state.

12
Marlin/Configuration.h
Unescape Escape View File

@ -145,6 +145,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -472,26 +475,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }

47
Marlin/Marlin_main.cpp
Unescape Escape View File

@ -1227,7 +1227,7 @@ inline bool code_value_bool() { return !code_has_value() || code_value_byte() >
} }
inline float axis_unit_factor(int axis) { inline float axis_unit_factor(int axis) {
return (axis == E_AXIS && volumetric_enabled ? volumetric_unit_factor : linear_unit_factor); return (axis >= E_AXIS && volumetric_enabled ? volumetric_unit_factor : linear_unit_factor);
} }
inline float code_value_linear_units() { return code_value_float() * linear_unit_factor; } inline float code_value_linear_units() { return code_value_float() * linear_unit_factor; }
@ -5772,22 +5772,38 @@ inline void gcode_M85() {
if (code_seen('S')) max_inactive_time = code_value_millis_from_seconds(); if (code_seen('S')) max_inactive_time = code_value_millis_from_seconds();
} }
/**
* Multi-stepper support for M92, M201, M203
*/
#if ENABLED(DISTINCT_E_FACTORS)
#define GET_TARGET_EXTRUDER(CMD) if (get_target_extruder_from_command(CMD)) return
#define TARGET_EXTRUDER target_extruder
#else
#define GET_TARGET_EXTRUDER(CMD) NOOP
#define TARGET_EXTRUDER 0
#endif
/** /**
* M92: Set axis steps-per-unit for one or more axes, X, Y, Z, and E. * M92: Set axis steps-per-unit for one or more axes, X, Y, Z, and E.
* (Follows the same syntax as G92) * (Follows the same syntax as G92)
*
* With multiple extruders use T to specify which one.
*/ */
inline void gcode_M92() { inline void gcode_M92() {
GET_TARGET_EXTRUDER(92);
LOOP_XYZE(i) { LOOP_XYZE(i) {
if (code_seen(axis_codes[i])) { if (code_seen(axis_codes[i])) {
if (i == E_AXIS) { if (i == E_AXIS) {
float value = code_value_per_axis_unit(i); float value = code_value_per_axis_unit(E_AXIS + TARGET_EXTRUDER);
if (value < 20.0) { if (value < 20.0) {
float factor = planner.axis_steps_per_mm[i] / value; // increase e constants if M92 E14 is given for netfab. float factor = planner.axis_steps_per_mm[E_AXIS + TARGET_EXTRUDER] / value; // increase e constants if M92 E14 is given for netfab.
planner.max_jerk[E_AXIS] *= factor; planner.max_jerk[E_AXIS] *= factor;
planner.max_feedrate_mm_s[E_AXIS] *= factor; planner.max_feedrate_mm_s[E_AXIS + TARGET_EXTRUDER] *= factor;
planner.max_acceleration_steps_per_s2[E_AXIS] *= factor; planner.max_acceleration_steps_per_s2[E_AXIS + TARGET_EXTRUDER] *= factor;
} }
planner.axis_steps_per_mm[E_AXIS] = value; planner.axis_steps_per_mm[E_AXIS + TARGET_EXTRUDER] = value;
} }
else { else {
planner.axis_steps_per_mm[i] = code_value_per_axis_unit(i); planner.axis_steps_per_mm[i] = code_value_per_axis_unit(i);
@ -6038,11 +6054,17 @@ inline void gcode_M200() {
/** /**
* M201: Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000) * M201: Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
*
* With multiple extruders use T to specify which one.
*/ */
inline void gcode_M201() { inline void gcode_M201() {
GET_TARGET_EXTRUDER(201);
LOOP_XYZE(i) { LOOP_XYZE(i) {
if (code_seen(axis_codes[i])) { if (code_seen(axis_codes[i])) {
planner.max_acceleration_mm_per_s2[i] = code_value_axis_units(i); const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0);
planner.max_acceleration_mm_per_s2[a] = code_value_axis_units(a);
} }
} }
// steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner) // steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner)
@ -6060,11 +6082,18 @@ inline void gcode_M201() {
/** /**
* M203: Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in units/sec * M203: Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in units/sec
*
* With multiple extruders use T to specify which one.
*/ */
inline void gcode_M203() { inline void gcode_M203() {
GET_TARGET_EXTRUDER(203);
LOOP_XYZE(i) LOOP_XYZE(i)
if (code_seen(axis_codes[i])) if (code_seen(axis_codes[i])) {
planner.max_feedrate_mm_s[i] = code_value_axis_units(i); const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0);
planner.max_feedrate_mm_s[a] = code_value_axis_units(a);
}
} }
/** /**

45
Marlin/configuration_store.cpp
Unescape Escape View File

@ -47,9 +47,9 @@
* 100 Version (char x4) * 100 Version (char x4)
* 104 EEPROM Checksum (uint16_t) * 104 EEPROM Checksum (uint16_t)
* *
* 106 M92 XYZE planner.axis_steps_per_mm (float x4) * 106 M92 XYZE planner.axis_steps_per_mm (float x4 ... x7)
* 122 M203 XYZE planner.max_feedrate_mm_s (float x4) * 122 M203 XYZE planner.max_feedrate_mm_s (float x4 ... x7)
* 138 M201 XYZE planner.max_acceleration_mm_per_s2 (uint32_t x4) * 138 M201 XYZE planner.max_acceleration_mm_per_s2 (uint32_t x4 ... x7)
* 154 M204 P planner.acceleration (float) * 154 M204 P planner.acceleration (float)
* 158 M204 R planner.retract_acceleration (float) * 158 M204 R planner.retract_acceleration (float)
* 162 M204 T planner.travel_acceleration (float) * 162 M204 T planner.travel_acceleration (float)
@ -571,10 +571,10 @@ void Config_Postprocess() {
void Config_ResetDefault() { void Config_ResetDefault() {
const float tmp1[] = DEFAULT_AXIS_STEPS_PER_UNIT, tmp2[] = DEFAULT_MAX_FEEDRATE; const float tmp1[] = DEFAULT_AXIS_STEPS_PER_UNIT, tmp2[] = DEFAULT_MAX_FEEDRATE;
const long tmp3[] = DEFAULT_MAX_ACCELERATION; const long tmp3[] = DEFAULT_MAX_ACCELERATION;
LOOP_XYZE(i) { LOOP_XYZE_N(i) {
planner.axis_steps_per_mm[i] = tmp1[i]; planner.axis_steps_per_mm[i] = tmp1[i < COUNT(tmp1) ? i : COUNT(tmp1) - 1];
planner.max_feedrate_mm_s[i] = tmp2[i]; planner.max_feedrate_mm_s[i] = tmp2[i < COUNT(tmp2) ? i : COUNT(tmp2) - 1];
planner.max_acceleration_mm_per_s2[i] = tmp3[i]; planner.max_acceleration_mm_per_s2[i] = tmp3[i < COUNT(tmp3) ? i : COUNT(tmp3) - 1];
} }
planner.acceleration = DEFAULT_ACCELERATION; planner.acceleration = DEFAULT_ACCELERATION;
@ -719,8 +719,16 @@ void Config_ResetDefault() {
SERIAL_ECHOPAIR(" M92 X", planner.axis_steps_per_mm[X_AXIS]); SERIAL_ECHOPAIR(" M92 X", planner.axis_steps_per_mm[X_AXIS]);
SERIAL_ECHOPAIR(" Y", planner.axis_steps_per_mm[Y_AXIS]); SERIAL_ECHOPAIR(" Y", planner.axis_steps_per_mm[Y_AXIS]);
SERIAL_ECHOPAIR(" Z", planner.axis_steps_per_mm[Z_AXIS]); SERIAL_ECHOPAIR(" Z", planner.axis_steps_per_mm[Z_AXIS]);
SERIAL_ECHOPAIR(" E", planner.axis_steps_per_mm[E_AXIS]); #if E_STEPPERS == 1
SERIAL_ECHOPAIR(" E", planner.axis_steps_per_mm[E_AXIS]);
#endif
SERIAL_EOL; SERIAL_EOL;
#if ENABLED(DISTINCT_E_FACTORS)
for (uint8_t i = 0; i < E_STEPPERS; i++) {
SERIAL_ECHOPAIR(" M92 T", (int)i);
SERIAL_ECHOLNPAIR(" E", planner.axis_steps_per_mm[E_AXIS + i]);
}
#endif
CONFIG_ECHO_START; CONFIG_ECHO_START;
@ -731,8 +739,16 @@ void Config_ResetDefault() {
SERIAL_ECHOPAIR(" M203 X", planner.max_feedrate_mm_s[X_AXIS]); SERIAL_ECHOPAIR(" M203 X", planner.max_feedrate_mm_s[X_AXIS]);
SERIAL_ECHOPAIR(" Y", planner.max_feedrate_mm_s[Y_AXIS]); SERIAL_ECHOPAIR(" Y", planner.max_feedrate_mm_s[Y_AXIS]);
SERIAL_ECHOPAIR(" Z", planner.max_feedrate_mm_s[Z_AXIS]); SERIAL_ECHOPAIR(" Z", planner.max_feedrate_mm_s[Z_AXIS]);
SERIAL_ECHOPAIR(" E", planner.max_feedrate_mm_s[E_AXIS]); #if E_STEPPERS == 1
SERIAL_ECHOPAIR(" E", planner.max_feedrate_mm_s[E_AXIS]);
#endif
SERIAL_EOL; SERIAL_EOL;
#if ENABLED(DISTINCT_E_FACTORS)
for (uint8_t i = 0; i < E_STEPPERS; i++) {
SERIAL_ECHOPAIR(" M203 T", (int)i);
SERIAL_ECHOLNPAIR(" E", planner.max_feedrate_mm_s[E_AXIS + i]);
}
#endif
CONFIG_ECHO_START; CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
@ -742,8 +758,17 @@ void Config_ResetDefault() {
SERIAL_ECHOPAIR(" M201 X", planner.max_acceleration_mm_per_s2[X_AXIS]); SERIAL_ECHOPAIR(" M201 X", planner.max_acceleration_mm_per_s2[X_AXIS]);
SERIAL_ECHOPAIR(" Y", planner.max_acceleration_mm_per_s2[Y_AXIS]); SERIAL_ECHOPAIR(" Y", planner.max_acceleration_mm_per_s2[Y_AXIS]);
SERIAL_ECHOPAIR(" Z", planner.max_acceleration_mm_per_s2[Z_AXIS]); SERIAL_ECHOPAIR(" Z", planner.max_acceleration_mm_per_s2[Z_AXIS]);
SERIAL_ECHOPAIR(" E", planner.max_acceleration_mm_per_s2[E_AXIS]); #if E_STEPPERS == 1
SERIAL_ECHOPAIR(" E", planner.max_acceleration_mm_per_s2[E_AXIS]);
#endif
SERIAL_EOL; SERIAL_EOL;
#if ENABLED(DISTINCT_E_FACTORS)
for (uint8_t i = 0; i < E_STEPPERS; i++) {
SERIAL_ECHOPAIR(" M201 T", (int)i);
SERIAL_ECHOLNPAIR(" E", planner.max_acceleration_mm_per_s2[E_AXIS + i]);
}
#endif
CONFIG_ECHO_START; CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Accelerations: P=printing, R=retract and T=travel"); SERIAL_ECHOLNPGM("Accelerations: P=printing, R=retract and T=travel");

1
Marlin/enum.h
Unescape Escape View File

@ -50,6 +50,7 @@ enum AxisEnum {
#define LOOP_XYZ(VAR) for (uint8_t VAR=X_AXIS; VAR<=Z_AXIS; VAR++) #define LOOP_XYZ(VAR) for (uint8_t VAR=X_AXIS; VAR<=Z_AXIS; VAR++)
#define LOOP_XYZE(VAR) for (uint8_t VAR=X_AXIS; VAR<=E_AXIS; VAR++) #define LOOP_XYZE(VAR) for (uint8_t VAR=X_AXIS; VAR<=E_AXIS; VAR++)
#define LOOP_XYZE_N(VAR) for (uint8_t VAR=X_AXIS; VAR<XYZE_N; VAR++)
typedef enum { typedef enum {
LINEARUNIT_MM, LINEARUNIT_MM,

14
Marlin/example_configurations/Cartesio/Configuration.h
Unescape Escape View File

@ -146,6 +146,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 3 #define EXTRUDERS 3
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -472,26 +475,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.128, 71.128, 640, 152 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 71.128, 71.128, 640, 152 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 200, 200, 20, 20 } // (mm/sec) #define DEFAULT_MAX_FEEDRATE { 200, 200, 20, 20 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 10000 }

12
Marlin/example_configurations/Felix/Configuration.h
Unescape Escape View File

@ -145,6 +145,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -455,26 +458,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 76.190476, 76.190476, 1600, 164 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 76.190476, 76.190476, 1600, 164 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 80000 } #define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 80000 }

12
Marlin/example_configurations/Felix/DUAL/Configuration.h
Unescape Escape View File

@ -145,6 +145,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 2 #define EXTRUDERS 2
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -455,26 +458,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 76.190476, 76.190476, 1600, 164 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 76.190476, 76.190476, 1600, 164 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 80000 } #define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 80000 }

12
Marlin/example_configurations/Hephestos/Configuration.h
Unescape Escape View File

@ -148,6 +148,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -464,26 +467,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 100.47095761381482 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 100.47095761381482 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 200, 200, 3.3, 25 } #define DEFAULT_MAX_FEEDRATE { 200, 200, 3.3, 25 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 1100, 1100, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 1100, 1100, 100, 10000 }

12
Marlin/example_configurations/Hephestos_2/Configuration.h
Unescape Escape View File

@ -145,6 +145,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -466,26 +469,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 8000, 210.02 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 8000, 210.02 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 250, 250, 2, 200 } #define DEFAULT_MAX_FEEDRATE { 250, 250, 2, 200 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 20, 1000 } #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 20, 1000 }

14
Marlin/example_configurations/K8200/Configuration.h
Unescape Escape View File

@ -165,6 +165,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -502,25 +505,30 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 64.25, 64.25, 2560, 600} // for K8200 #define DEFAULT_AXIS_STEPS_PER_UNIT { 64.25, 64.25, 2560, 600 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 }

12
Marlin/example_configurations/K8400/Configuration.h
Unescape Escape View File

@ -145,6 +145,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -472,26 +475,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 134.74, 134.74, 4266.66, 148.7 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 134.74, 134.74, 4266.66, 148.7 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 160, 160, 10, 10000 } #define DEFAULT_MAX_FEEDRATE { 160, 160, 10, 10000 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 }

12
Marlin/example_configurations/K8400/Dual-head/Configuration.h
Unescape Escape View File

@ -145,6 +145,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 2 #define EXTRUDERS 2
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -472,26 +475,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 134.74, 134.74, 4266.66, 148.7 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 134.74, 134.74, 4266.66, 148.7 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 160, 160, 10, 10000 } #define DEFAULT_MAX_FEEDRATE { 160, 160, 10, 10000 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 }

14
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
Unescape Escape View File

@ -145,6 +145,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -472,26 +475,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402*2,78.7402*2,5120.00,760*1*1.5} #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.7402*2, 78.7402*2, 5120.00, 760*1*1.5 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }

17
Marlin/example_configurations/RigidBot/Configuration.h
Unescape Escape View File

@ -148,6 +148,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 // Single extruder. Set to 2 for dual extruders #define EXTRUDERS 1 // Single extruder. Set to 2 for dual extruders
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -469,27 +472,33 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 44.3090, 22.1545, 1600, 53.5 } // default steps per unit for RigidBot with standard hardware // default steps per unit for RigidBot with standard hardware
// default steps for 16-tooth pulleys { 100.06, 50.06, 1600, 76 }, HPX2-MAX E=504, RigidBot E=53.5, Peter Stoneham's=76 #define DEFAULT_AXIS_STEPS_PER_UNIT { 44.3090, 22.1545, 1600, 53.5 }
// default steps for 16-tooth pulleys { 100.06, 50.06, 1600, 76 } // HPX2-MAX E=504, RigidBot E=53.5, Peter Stoneham's=76
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 800, 800, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 800, 800, 100, 10000 }

14
Marlin/example_configurations/SCARA/Configuration.h
Unescape Escape View File

@ -177,6 +177,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -487,26 +490,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT {103.69,106.65,200/1.25,1000} // default steps per unit for SCARA #define DEFAULT_AXIS_STEPS_PER_UNIT { 103.69, 106.65, 200/1.25, 1000 } // default steps per unit for SCARA
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 300, 300, 30, 25 } #define DEFAULT_MAX_FEEDRATE { 300, 300, 30, 25 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 300, 300, 20, 1000 } #define DEFAULT_MAX_ACCELERATION { 300, 300, 20, 1000 }

12
Marlin/example_configurations/TAZ4/Configuration.h
Unescape Escape View File

@ -145,6 +145,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -493,26 +496,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100.5, 100.5, 400, 850 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 100.5, 100.5, 400, 850 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 800, 800, 8, 50 } #define DEFAULT_MAX_FEEDRATE { 800, 800, 8, 50 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 }

14
Marlin/example_configurations/WITBOX/Configuration.h
Unescape Escape View File

@ -148,6 +148,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -464,26 +467,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,600.0*8/3,102.073} #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 600.0*8/3, 102.073 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 350, 350, 7.2, 80 } #define DEFAULT_MAX_FEEDRATE { 350, 350, 7.2, 80 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 10, 1000 } #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 10, 1000 }

12
Marlin/example_configurations/adafruit/ST7565/Configuration.h
Unescape Escape View File

@ -145,6 +145,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -472,26 +475,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }

18
Marlin/example_configurations/delta/biv2.5/Configuration.h
Unescape Escape View File

@ -145,6 +145,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 2 #define EXTRUDERS 2
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -203,7 +206,7 @@
/** /**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
* *
* Temperature sensors available: * Temperature sensors available:
* *
* -3 : thermocouple with MAX31855 (only for sensor 0) * -3 : thermocouple with MAX31855 (only for sensor 0)
@ -228,13 +231,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design * 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2 * 70 : the 100K thermistor found in the bq Hephestos 2
* *
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID) * (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup) * 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
* *
* 1047 : Pt1000 with 4k7 pullup * 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard) * 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup * 147 : Pt100 with 4k7 pullup
@ -520,26 +523,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 72.9, 72.9, 72.9, 291 } // default steps per unit for BI v2.5 (cable drive) #define DEFAULT_AXIS_STEPS_PER_UNIT { 72.9, 72.9, 72.9, 291 } // default steps per unit for BI v2.5 (cable drive)
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 150 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 150 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 }

14
Marlin/example_configurations/delta/generic/Configuration.h
Unescape Escape View File

@ -145,6 +145,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -520,26 +523,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 80, 760*1.1} // default steps per unit for Kossel (GT2, 20 tooth) #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 80, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth)
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 }

14
Marlin/example_configurations/delta/kossel_mini/Configuration.h
Unescape Escape View File

@ -145,6 +145,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -520,26 +523,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 80, 760*1.1} // default steps per unit for Kossel (GT2, 20 tooth) #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 80, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth)
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 }

14
Marlin/example_configurations/delta/kossel_pro/Configuration.h
Unescape Escape View File

@ -149,6 +149,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -514,26 +517,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT {XYZ_STEPS, XYZ_STEPS, XYZ_STEPS, 184.8} #define DEFAULT_AXIS_STEPS_PER_UNIT { XYZ_STEPS, XYZ_STEPS, XYZ_STEPS, 184.8 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 } #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 9000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 9000 }

14
Marlin/example_configurations/delta/kossel_xl/Configuration.h
Unescape Escape View File

@ -138,6 +138,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -526,26 +529,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT {XYZ_STEPS, XYZ_STEPS, XYZ_STEPS, 158} // default steps per unit for PowerWasp #define DEFAULT_AXIS_STEPS_PER_UNIT { XYZ_STEPS, XYZ_STEPS, XYZ_STEPS, 158 } // default steps per unit for PowerWasp
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 }

12
Marlin/example_configurations/makibox/Configuration.h
Unescape Escape View File

@ -145,6 +145,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -475,26 +478,31 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 163 } // default steps per unit for ***** MakiBox A6 ***** #define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 163 } // default steps per unit for ***** MakiBox A6 *****
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 60, 60, 20, 45 } #define DEFAULT_MAX_FEEDRATE { 60, 60, 20, 45 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 30, 10000 } #define DEFAULT_MAX_ACCELERATION { 2000, 2000, 30, 10000 }

14
Marlin/example_configurations/tvrrug/Round2/Configuration.h
Unescape Escape View File

@ -145,6 +145,9 @@
// :[1, 2, 3, 4] // :[1, 2, 3, 4]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -462,30 +465,35 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.1, 71.1, 2560, 600 } // David TVRR #define DEFAULT_AXIS_STEPS_PER_UNIT { 71.1, 71.1, 2560, 600 } // David TVRR
//#define DEFAULT_AXIS_STEPS_PER_UNIT {79.87, 79.87, 2566, 563,78} // Al's TVRR //#define DEFAULT_AXIS_STEPS_PER_UNIT { 79.87, 79.87, 2566, 563.78 } // Al's TVRR
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 81.26, 80.01, 2561, 599.14 } // Michel TVRR old //#define DEFAULT_AXIS_STEPS_PER_UNIT { 81.26, 80.01, 2561, 599.14 } // Michel TVRR old
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.1, 71.1, 2560, 739.65 } // Michel TVRR //#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.1, 71.1, 2560, 739.65 } // Michel TVRR
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 45 } // David TVRR #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 45 } // David TVRR
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* * X, Y, Z, E0 [, E1[, E2[, E3]]]
* Maximum start speed for accelerated moves: { X, Y, Z, E }
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 }

93
Marlin/planner.cpp
Unescape Escape View File

@ -81,12 +81,16 @@ block_t Planner::block_buffer[BLOCK_BUFFER_SIZE];
volatile uint8_t Planner::block_buffer_head = 0, // Index of the next block to be pushed volatile uint8_t Planner::block_buffer_head = 0, // Index of the next block to be pushed
Planner::block_buffer_tail = 0; Planner::block_buffer_tail = 0;
float Planner::max_feedrate_mm_s[NUM_AXIS], // Max speeds in mm per second float Planner::max_feedrate_mm_s[XYZE_N], // Max speeds in mm per second
Planner::axis_steps_per_mm[NUM_AXIS], Planner::axis_steps_per_mm[XYZE_N],
Planner::steps_to_mm[NUM_AXIS]; Planner::steps_to_mm[XYZE_N];
uint32_t Planner::max_acceleration_steps_per_s2[NUM_AXIS], #if ENABLED(DISTINCT_E_FACTORS)
Planner::max_acceleration_mm_per_s2[NUM_AXIS]; // Use M201 to override by software uint8_t Planner::last_extruder = 0; // Respond to extruder change
#endif
uint32_t Planner::max_acceleration_steps_per_s2[XYZE_N],
Planner::max_acceleration_mm_per_s2[XYZE_N]; // Use M201 to override by software
millis_t Planner::min_segment_time; millis_t Planner::min_segment_time;
float Planner::min_feedrate_mm_s, float Planner::min_feedrate_mm_s,
@ -650,9 +654,17 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
lround(a * axis_steps_per_mm[X_AXIS]), lround(a * axis_steps_per_mm[X_AXIS]),
lround(b * axis_steps_per_mm[Y_AXIS]), lround(b * axis_steps_per_mm[Y_AXIS]),
lround(c * axis_steps_per_mm[Z_AXIS]), lround(c * axis_steps_per_mm[Z_AXIS]),
lround(e * axis_steps_per_mm[E_AXIS]) lround(e * axis_steps_per_mm[E_AXIS_N])
}; };
// When changing extruders recalculate steps corresponding to the E position
#if ENABLED(DISTINCT_E_FACTORS)
if (last_extruder != extruder && axis_steps_per_mm[E_AXIS_N] != axis_steps_per_mm[E_AXIS + last_extruder]) {
position[E_AXIS] = lround(position[E_AXIS] * axis_steps_per_mm[E_AXIS_N] * steps_to_mm[E_AXIS + last_extruder]);
last_extruder = extruder;
}
#endif
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
float target_float[XYZE] = {a, b, c, e}; float target_float[XYZE] = {a, b, c, e};
float de_float = target_float[E_AXIS] - position_float[E_AXIS]; float de_float = target_float[E_AXIS] - position_float[E_AXIS];
@ -702,7 +714,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP); SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP);
} }
#if ENABLED(PREVENT_LENGTHY_EXTRUDE) #if ENABLED(PREVENT_LENGTHY_EXTRUDE)
if (labs(de) > (int32_t)axis_steps_per_mm[E_AXIS] * (EXTRUDE_MAXLENGTH)) { // It's not important to get max. extrusion length in a precision < 1mm, so save some cycles and cast to int if (labs(de) > (int32_t)axis_steps_per_mm[E_AXIS_N] * (EXTRUDE_MAXLENGTH)) { // It's not important to get max. extrusion length in a precision < 1mm, so save some cycles and cast to int
position[E_AXIS] = target[E_AXIS]; // Behave as if the move really took place, but ignore E part position[E_AXIS] = target[E_AXIS]; // Behave as if the move really took place, but ignore E part
de = 0; // no difference de = 0; // no difference
SERIAL_ECHO_START; SERIAL_ECHO_START;
@ -941,7 +953,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
delta_mm[Y_AXIS] = db * steps_to_mm[Y_AXIS]; delta_mm[Y_AXIS] = db * steps_to_mm[Y_AXIS];
delta_mm[Z_AXIS] = dc * steps_to_mm[Z_AXIS]; delta_mm[Z_AXIS] = dc * steps_to_mm[Z_AXIS];
#endif #endif
delta_mm[E_AXIS] = esteps_float * steps_to_mm[E_AXIS]; delta_mm[E_AXIS] = esteps_float * steps_to_mm[E_AXIS_N];
if (block->steps[X_AXIS] < MIN_STEPS_PER_SEGMENT && block->steps[Y_AXIS] < MIN_STEPS_PER_SEGMENT && block->steps[Z_AXIS] < MIN_STEPS_PER_SEGMENT) { if (block->steps[X_AXIS] < MIN_STEPS_PER_SEGMENT && block->steps[Y_AXIS] < MIN_STEPS_PER_SEGMENT && block->steps[Z_AXIS] < MIN_STEPS_PER_SEGMENT) {
block->millimeters = fabs(delta_mm[E_AXIS]); block->millimeters = fabs(delta_mm[E_AXIS]);
@ -1091,16 +1103,16 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
accel = ceil(retract_acceleration * steps_per_mm); accel = ceil(retract_acceleration * steps_per_mm);
} }
else { else {
#define LIMIT_ACCEL_LONG(AXIS) do{ \ #define LIMIT_ACCEL_LONG(AXIS,INDX) do{ \
if (block->steps[AXIS] && max_acceleration_steps_per_s2[AXIS] < accel) { \ if (block->steps[AXIS] && max_acceleration_steps_per_s2[AXIS+INDX] < accel) { \
const uint32_t comp = max_acceleration_steps_per_s2[AXIS] * block->step_event_count; \ const uint32_t comp = max_acceleration_steps_per_s2[AXIS+INDX] * block->step_event_count; \
if (accel * block->steps[AXIS] > comp) accel = comp / block->steps[AXIS]; \ if (accel * block->steps[AXIS] > comp) accel = comp / block->steps[AXIS]; \
} \ } \
}while(0) }while(0)
#define LIMIT_ACCEL_FLOAT(AXIS) do{ \ #define LIMIT_ACCEL_FLOAT(AXIS,INDX) do{ \
if (block->steps[AXIS] && max_acceleration_steps_per_s2[AXIS] < accel) { \ if (block->steps[AXIS] && max_acceleration_steps_per_s2[AXIS+INDX] < accel) { \
const float comp = (float)max_acceleration_steps_per_s2[AXIS] * (float)block->step_event_count; \ const float comp = (float)max_acceleration_steps_per_s2[AXIS+INDX] * (float)block->step_event_count; \
if ((float)accel * (float)block->steps[AXIS] > comp) accel = comp / (float)block->steps[AXIS]; \ if ((float)accel * (float)block->steps[AXIS] > comp) accel = comp / (float)block->steps[AXIS]; \
} \ } \
}while(0) }while(0)
@ -1109,16 +1121,17 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
accel = ceil((esteps ? acceleration : travel_acceleration) * steps_per_mm); accel = ceil((esteps ? acceleration : travel_acceleration) * steps_per_mm);
// Limit acceleration per axis // Limit acceleration per axis
if (block->step_event_count <= cutoff_long){ if (block->step_event_count <= cutoff_long) {
LIMIT_ACCEL_LONG(X_AXIS); LIMIT_ACCEL_LONG(X_AXIS,0);
LIMIT_ACCEL_LONG(Y_AXIS); LIMIT_ACCEL_LONG(Y_AXIS,0);
LIMIT_ACCEL_LONG(Z_AXIS); LIMIT_ACCEL_LONG(Z_AXIS,0);
LIMIT_ACCEL_LONG(E_AXIS); LIMIT_ACCEL_LONG(E_AXIS,extruder);
} else { }
LIMIT_ACCEL_FLOAT(X_AXIS); else {
LIMIT_ACCEL_FLOAT(Y_AXIS); LIMIT_ACCEL_FLOAT(X_AXIS,0);
LIMIT_ACCEL_FLOAT(Z_AXIS); LIMIT_ACCEL_FLOAT(Y_AXIS,0);
LIMIT_ACCEL_FLOAT(E_AXIS); LIMIT_ACCEL_FLOAT(Z_AXIS,0);
LIMIT_ACCEL_FLOAT(E_AXIS,extruder);
} }
} }
block->acceleration_steps_per_s2 = accel; block->acceleration_steps_per_s2 = accel;
@ -1302,7 +1315,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
} }
else { else {
block->use_advance_lead = true; block->use_advance_lead = true;
block->abs_adv_steps_multiplier8 = lround(extruder_advance_k * (de_float / mm_D_float) * block->nominal_speed / (float)block->nominal_rate * axis_steps_per_mm[E_AXIS] * 256.0); block->abs_adv_steps_multiplier8 = lround(extruder_advance_k * (de_float / mm_D_float) * block->nominal_speed / (float)block->nominal_rate * axis_steps_per_mm[E_AXIS_N] * 256.0);
} }
#elif ENABLED(ADVANCE) #elif ENABLED(ADVANCE)
@ -1350,13 +1363,18 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
*/ */
void Planner::_set_position_mm(const float &a, const float &b, const float &c, const float &e) { void Planner::_set_position_mm(const float &a, const float &b, const float &c, const float &e) {
#if ENABLED(DISTINCT_E_FACTORS)
#define _EINDEX (E_AXIS + active_extruder)
last_extruder = active_extruder;
#else
#define _EINDEX E_AXIS
#endif
long na = position[X_AXIS] = lround(a * axis_steps_per_mm[X_AXIS]), long na = position[X_AXIS] = lround(a * axis_steps_per_mm[X_AXIS]),
nb = position[Y_AXIS] = lround(b * axis_steps_per_mm[Y_AXIS]), nb = position[Y_AXIS] = lround(b * axis_steps_per_mm[Y_AXIS]),
nc = position[Z_AXIS] = lround(c * axis_steps_per_mm[Z_AXIS]), nc = position[Z_AXIS] = lround(c * axis_steps_per_mm[Z_AXIS]),
ne = position[E_AXIS] = lround(e * axis_steps_per_mm[E_AXIS]); ne = position[E_AXIS] = lround(e * axis_steps_per_mm[_EINDEX]);
stepper.set_position(na, nb, nc, ne); stepper.set_position(na, nb, nc, ne);
previous_nominal_speed = 0.0; // Resets planner junction speeds. Assumes start from rest. previous_nominal_speed = 0.0; // Resets planner junction speeds. Assumes start from rest.
ZERO(previous_speed); ZERO(previous_speed);
} }
@ -1386,24 +1404,35 @@ void Planner::sync_from_steppers() {
* Setters for planner position (also setting stepper position). * Setters for planner position (also setting stepper position).
*/ */
void Planner::set_position_mm(const AxisEnum axis, const float& v) { void Planner::set_position_mm(const AxisEnum axis, const float& v) {
position[axis] = lround(v * axis_steps_per_mm[axis]); #if ENABLED(DISTINCT_E_FACTORS)
const uint8_t axis_index = axis + (axis == E_AXIS ? active_extruder : 0);
last_extruder = active_extruder;
#else
const uint8_t axis_index = axis;
#endif
position[axis] = lround(v * axis_steps_per_mm[axis_index]);
stepper.set_position(axis, v); stepper.set_position(axis, v);
previous_speed[axis] = 0.0; previous_speed[axis] = 0.0;
} }
// Recalculate the steps/s^2 acceleration rates, based on the mm/s^2 // Recalculate the steps/s^2 acceleration rates, based on the mm/s^2
void Planner::reset_acceleration_rates() { void Planner::reset_acceleration_rates() {
#if ENABLED(DISTINCT_E_FACTORS)
#define HIGHEST_CONDITION (i < E_AXIS || i == E_AXIS + active_extruder)
#else
#define HIGHEST_CONDITION true
#endif
uint32_t highest_rate = 1; uint32_t highest_rate = 1;
LOOP_XYZE(i) { LOOP_XYZE_N(i) {
max_acceleration_steps_per_s2[i] = max_acceleration_mm_per_s2[i] * axis_steps_per_mm[i]; max_acceleration_steps_per_s2[i] = max_acceleration_mm_per_s2[i] * axis_steps_per_mm[i];
NOLESS(highest_rate, max_acceleration_steps_per_s2[i]); if (HIGHEST_CONDITION) NOLESS(highest_rate, max_acceleration_steps_per_s2[i]);
} }
cutoff_long = 4294967295UL / highest_rate; cutoff_long = 4294967295UL / highest_rate;
} }
// Recalculate position, steps_to_mm if axis_steps_per_mm changes! // Recalculate position, steps_to_mm if axis_steps_per_mm changes!
void Planner::refresh_positioning() { void Planner::refresh_positioning() {
LOOP_XYZE(i) steps_to_mm[i] = 1.0 / axis_steps_per_mm[i]; LOOP_XYZE_N(i) steps_to_mm[i] = 1.0 / axis_steps_per_mm[i];
set_position_mm_kinematic(current_position); set_position_mm_kinematic(current_position);
reset_acceleration_rates(); reset_acceleration_rates();
} }

22
Marlin/planner.h
Unescape Escape View File

@ -143,11 +143,15 @@ class Planner {
static volatile uint8_t block_buffer_head, // Index of the next block to be pushed static volatile uint8_t block_buffer_head, // Index of the next block to be pushed
block_buffer_tail; block_buffer_tail;
static float max_feedrate_mm_s[NUM_AXIS]; // Max speeds in mm per second #if ENABLED(DISTINCT_E_FACTORS)
static float axis_steps_per_mm[NUM_AXIS]; static uint8_t last_extruder; // Respond to extruder change
static float steps_to_mm[NUM_AXIS]; #endif
static unsigned long max_acceleration_steps_per_s2[NUM_AXIS];
static unsigned long max_acceleration_mm_per_s2[NUM_AXIS]; // Use M201 to override by software static float max_feedrate_mm_s[XYZE_N], // Max speeds in mm per second
axis_steps_per_mm[XYZE_N],
steps_to_mm[XYZE_N];
static unsigned long max_acceleration_steps_per_s2[XYZE_N],
max_acceleration_mm_per_s2[XYZE_N]; // Use M201 to override by software
static millis_t min_segment_time; static millis_t min_segment_time;
static float min_feedrate_mm_s, static float min_feedrate_mm_s,
@ -343,7 +347,13 @@ class Planner {
static void set_position_mm_kinematic(const float position[NUM_AXIS]); static void set_position_mm_kinematic(const float position[NUM_AXIS]);
static void set_position_mm(const AxisEnum axis, const float &v); static void set_position_mm(const AxisEnum axis, const float &v);
static FORCE_INLINE void set_z_position_mm(const float &z) { set_position_mm(Z_AXIS, z); } static FORCE_INLINE void set_z_position_mm(const float &z) { set_position_mm(Z_AXIS, z); }
static FORCE_INLINE void set_e_position_mm(const float &e) { set_position_mm(E_AXIS, e); } static FORCE_INLINE void set_e_position_mm(const float &e) {
set_position_mm(E_AXIS
#if ENABLED(DISTINCT_E_FACTORS)
+ active_extruder
#endif
, e);
}
/** /**
* Sync from the stepper positions. (e.g., after an interrupted move) * Sync from the stepper positions. (e.g., after an interrupted move)

Write Preview
Loading…
Cancel
Save