microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Apply some formatting

Browse Source
2.0.x
Scott Lahteine 7 years ago
parent 7dacc999b9
commit 32512332df
33 changed files with 577 additions and 585 deletions
Show Stats Download Patch File Download Diff File

34
Marlin/src/HAL/HAL_AVR/ServoTimers.h
Unescape Escape View File

@ -20,23 +20,23 @@
*
*/
/*
ServoTimers.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
Copyright (c) 2009 Michael Margolis. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
/**
* ServoTimers.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
* Copyright (c) 2009 Michael Margolis. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _SERVOTIMERS_H_

4
Marlin/src/HAL/HAL_AVR/fastio_AVR.h
Unescape Escape View File

@ -21,9 +21,9 @@
*/
/**
* Fast I/O Routines
* Fast I/O Routines for AVR
* Use direct port manipulation to save scads of processor time.
* Contributed by Triffid_Hunter. Modified by Kliment and the Marlin team.
* Contributed by Triffid_Hunter and modified by Kliment, thinkyhead, Bob-the-Kuhn, et.al.
*/
#ifndef _FASTIO_ARDUINO_H_

23
Marlin/src/HAL/HAL_DUE/fastio_Due.h
Unescape Escape View File

@ -21,8 +21,9 @@
*/
/**
This code contributed by Triffid_Hunter and modified by Kliment
why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
* Fast I/O Routines for SAM3X8E
* Use direct port manipulation to save scads of processor time.
* Contributed by Triffid_Hunter and modified by Kliment, thinkyhead, Bob-the-Kuhn, et.al.
*/
/**
@ -35,7 +36,7 @@
#define _FASTIO_DUE_H
/**
utility functions
* Utility functions
*/
#ifndef MASK
@ -43,8 +44,11 @@
#endif
/**
magic I/O routines
now you can simply SET_OUTPUT(STEP); WRITE(STEP, 1); WRITE(STEP, 0);
* Magic I/O routines
*
* Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
*
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
*/
/// Read a pin
@ -80,8 +84,6 @@
/// check if pin is an timer
#define _GET_TIMER(IO)
// why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
/// Read a pin wrapper
#define READ(IO) _READ(IO)
@ -111,9 +113,8 @@
#define OUT_WRITE(IO, v) { SET_OUTPUT(IO); WRITE(IO, v); }
/**
ports and functions
added as necessary or if I feel like it- not a comprehensive list!
* Ports and functions
* Added as necessary or if I feel like it- not a comprehensive list!
*/
// UART
@ -125,7 +126,7 @@
#define SDA DIO20
/**
pins
* pins
*/
#define DIO0_PIN 8

32
Marlin/src/HAL/HAL_DUE/servotimers.h
Unescape Escape View File

@ -1,19 +1,19 @@
/*
Copyright (c) 2013 Arduino LLC. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
/**
* Copyright (c) 2013 Arduino LLC. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/**

4
Marlin/src/HAL/HAL_LPC1768/HAL_LPC1768_LCD_defines.h
Unescape Escape View File

@ -21,10 +21,10 @@
*/
/**
* LPC1768 LCD specific defines
* LPC1768 LCD-specific defines
*/
#if defined(TARGET_LPC1768)
#ifdef TARGET_LPC1768
// pointers to low level routines - must always supply these
//#define U8G_HAL_LINKS

1
Marlin/src/HAL/HAL_LPC1768/LPC1768_PWM.cpp
Unescape Escape View File

@ -60,7 +60,6 @@
* See the end of this file for details on the hardware/firmware interaction
*/
#ifdef TARGET_LPC1768
#include <lpc17xx_pinsel.h>
#include "LPC1768_PWM.h"

57
Marlin/src/HAL/HAL_LPC1768/SoftwareSerial.cpp
Unescape Escape View File

@ -1,32 +1,33 @@
/*
SoftwareSerial.cpp (formerly NewSoftSerial.cpp) -
Multi-instance software serial library for Arduino/Wiring
-- Interrupt-driven receive and other improvements by ladyada
(http://ladyada.net)
-- Tuning, circular buffer, derivation from class Print/Stream,
multi-instance support, porting to 8MHz processors,
various optimizations, PROGMEM delay tables, inverse logic and
direct port writing by Mikal Hart (http://www.arduiniana.org)
-- Pin change interrupt macros by Paul Stoffregen (http://www.pjrc.com)
-- 20MHz processor support by Garrett Mace (http://www.macetech.com)
-- ATmega1280/2560 support by Brett Hagman (http://www.roguerobotics.com/)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
The latest version of this library can always be found at
http://arduiniana.org.
* SoftwareSerial.cpp (formerly NewSoftSerial.cpp)
*
* Multi-instance software serial library for Arduino/Wiring
* -- Interrupt-driven receive and other improvements by ladyada
* (http://ladyada.net)
* -- Tuning, circular buffer, derivation from class Print/Stream,
* multi-instance support, porting to 8MHz processors,
* various optimizations, PROGMEM delay tables, inverse logic and
* direct port writing by Mikal Hart (http://www.arduiniana.org)
* -- Pin change interrupt macros by Paul Stoffregen (http://www.pjrc.com)
* -- 20MHz processor support by Garrett Mace (http://www.macetech.com)
* -- ATmega1280/2560 support by Brett Hagman (http://www.roguerobotics.com/)
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* The latest version of this library can always be found at
* http://arduiniana.org.
*/
#ifdef TARGET_LPC1768

57
Marlin/src/HAL/HAL_LPC1768/SoftwareSerial.h
Unescape Escape View File

@ -1,32 +1,33 @@
/*
SoftwareSerial.h (formerly NewSoftSerial.h) -
Multi-instance software serial library for Arduino/Wiring
-- Interrupt-driven receive and other improvements by ladyada
(http://ladyada.net)
-- Tuning, circular buffer, derivation from class Print/Stream,
multi-instance support, porting to 8MHz processors,
various optimizations, PROGMEM delay tables, inverse logic and
direct port writing by Mikal Hart (http://www.arduiniana.org)
-- Pin change interrupt macros by Paul Stoffregen (http://www.pjrc.com)
-- 20MHz processor support by Garrett Mace (http://www.macetech.com)
-- ATmega1280/2560 support by Brett Hagman (http://www.roguerobotics.com/)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
The latest version of this library can always be found at
http://arduiniana.org.
* SoftwareSerial.h (formerly NewSoftSerial.h)
*
* Multi-instance software serial library for Arduino/Wiring
* -- Interrupt-driven receive and other improvements by ladyada
* (http://ladyada.net)
* -- Tuning, circular buffer, derivation from class Print/Stream,
* multi-instance support, porting to 8MHz processors,
* various optimizations, PROGMEM delay tables, inverse logic and
* direct port writing by Mikal Hart (http://www.arduiniana.org)
* -- Pin change interrupt macros by Paul Stoffregen (http://www.pjrc.com)
* -- 20MHz processor support by Garrett Mace (http://www.macetech.com)
* -- ATmega1280/2560 support by Brett Hagman (http://www.roguerobotics.com/)
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* The latest version of this library can always be found at
* http://arduiniana.org.
*/
#ifndef SOFTWARESERIAL_H

32
Marlin/src/HAL/HAL_LPC1768/WInterrupts.cpp
Unescape Escape View File

@ -1,19 +1,19 @@
/*
Copyright (c) 2011-2012 Arduino. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
/**
* Copyright (c) 2011-2012 Arduino. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifdef TARGET_LPC1768

14
Marlin/src/HAL/HAL_LPC1768/fastio.h
Unescape Escape View File

@ -21,8 +21,9 @@
*/
/**
This code contributed by Triffid_Hunter and modified by Kliment
why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
* Fast I/O Routines for LPC1768/9
* Use direct port manipulation to save scads of processor time.
* Contributed by Triffid_Hunter and modified by Kliment, thinkyhead, Bob-the-Kuhn, et.al.
*/
/**
@ -57,8 +58,11 @@ bool useable_hardware_PWM(uint8_t pin);
#define WRITE_PIN(IO, v) ((v) ? WRITE_PIN_SET(IO) : WRITE_PIN_CLR(IO))
/**
magic I/O routines
now you can simply SET_OUTPUT(STEP); WRITE(STEP, 1); WRITE(STEP, 0);
* Magic I/O routines
*
* Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
*
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
*/
/// Read a pin
@ -89,8 +93,6 @@ bool useable_hardware_PWM(uint8_t pin);
/// check if pin is an timer
#define _GET_TIMER(IO)
// why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
/// Read a pin wrapper
#define READ(IO) _READ(IO)

43
Marlin/src/HAL/HAL_LPC1768/include/Wire.h
Unescape Escape View File

@ -1,22 +1,22 @@
/*
TwoWire.h - TWI/I2C library for Arduino & Wiring
Copyright (c) 2006 Nicholas Zambetti. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Modified 2012 by Todd Krein (todd@krein.org) to implement repeated starts
* TwoWire.h - TWI/I2C library for Arduino & Wiring
* Copyright (c) 2006 Nicholas Zambetti. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Modified 2012 by Todd Krein (todd@krein.org) to implement repeated starts
*/
// Modified for use with the mcp4451 digipot routine
@ -28,9 +28,7 @@
#include <inttypes.h>
class TwoWire
{
class TwoWire {
public:
//TwoWire();
void begin();
@ -39,11 +37,12 @@ class TwoWire
size_t write(uint8_t);
};
//extern TwoWire Wire;//
//extern TwoWire Wire;
TwoWire Wire;
////////////////////////////////////////////////////////////////////////////////////////
extern "C" uint8_t digipot_mcp4451_start(uint8_t sla);
extern "C" void digipot_mcp4451_init(void);
extern "C" uint8_t digipot_mcp4451_send_byte(uint8_t data);

19
Marlin/src/HAL/HAL_LPC1768/include/digipot_mcp4451_I2C_routines.c
Unescape Escape View File

@ -23,8 +23,6 @@
// adapted from I2C/master/master.c example
// https://www-users.cs.york.ac.uk/~pcc/MCP/HAPR-Course-web/CMSIS/examples/html/master_8c_source.html
#ifdef TARGET_LPC1768
#ifdef __cplusplus
@ -40,8 +38,7 @@
// These two routines are exact copies of the lpc17xx_i2c.c routines. Couldn't link to
// to the lpc17xx_i2c.c routines so had to copy them into this file & rename them.
static uint32_t _I2C_Start (LPC_I2C_TypeDef *I2Cx)
{
static uint32_t _I2C_Start (LPC_I2C_TypeDef *I2Cx) {
// Reset STA, STO, SI
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC|I2C_I2CONCLR_STOC|I2C_I2CONCLR_STAC;
@ -54,17 +51,12 @@
return (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK);
}
static void _I2C_Stop (LPC_I2C_TypeDef *I2Cx)
{
static void _I2C_Stop (LPC_I2C_TypeDef *I2Cx) {
/* Make sure start bit is not active */
if (I2Cx->I2CONSET & I2C_I2CONSET_STA)
{
I2Cx->I2CONCLR = I2C_I2CONCLR_STAC;
}
I2Cx->I2CONSET = I2C_I2CONSET_STO|I2C_I2CONSET_AA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
}
@ -118,7 +110,7 @@
void digipot_mcp4451_init(void) {
/*
/**
* Init I2C pin connect
*/
PinCfg.OpenDrain = 0;
@ -156,7 +148,6 @@
uint8_t digipot_mcp4451_send_byte(uint8_t data) {
LPC_I2C1->I2DAT = data & I2C_I2DAT_BITMASK; // transmit data
LPC_I2C1->I2CONSET = I2C_I2CONSET_AA;
LPC_I2C1->I2CONCLR = I2C_I2CONCLR_SIC;
@ -164,8 +155,8 @@
return 1;
}
#ifdef __cplusplus
}
#endif
#endif
#endif // TARGET_LPC1768

4
Marlin/src/HAL/HAL_LPC1768/main.cpp
Unescape Escape View File

@ -79,8 +79,8 @@ int main(void) {
USB_Init(); // USB Initialization
USB_Connect(TRUE); // USB Connect
volatile uint32_t usb_timeout = millis() + 2000;
while (!USB_Configuration && millis() < usb_timeout) {
const uint32_t usb_timeout = millis() + 2000;
while (!USB_Configuration && PENDING(millis(), usb_timeout)) {
delay(50);
#if PIN_EXISTS(LED)

2
Marlin/src/HAL/HAL_LPC1768/pinsDebug_LPC1768.h
Unescape Escape View File

@ -25,7 +25,7 @@
*/
/**
* translation of routines & variables used by pinsDebug.h
* Translation of routines & variables used by pinsDebug.h
*/
#define pwm_details(pin) pin = pin // do nothing // print PWM details

33
Marlin/src/HAL/HAL_LPC1768/servo_private.h
Unescape Escape View File

@ -21,22 +21,22 @@
*/
/**
servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
Copyright (c) 2009 Michael Margolis. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
* Copyright (c) 2009 Michael Margolis. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/**
@ -47,7 +47,6 @@
*
*/
#ifndef SERVO_PRIVATE_H
#define SERVO_PRIVATE_H

2
Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.h
Unescape Escape View File

@ -26,12 +26,12 @@
#ifndef WATCHDOG_STM32F1_H
#define WATCHDOG_STM32F1_H
#include <libmaple/iwdg.h>
#include "../../../src/inc/MarlinConfig.h"
#define STM32F1_WD_RELOAD 625
// Arduino STM32F1 core now has watchdog support
// Initialize watchdog with a 4 second countdown time

2
Marlin/src/HAL/HAL_TEENSY35_36/fastio_Teensy.h
Unescape Escape View File

@ -23,7 +23,7 @@
/**
* Fast I/O Routines for Teensy 3.5 and Teensy 3.6
* Use direct port manipulation to save scads of processor time.
* Contributed by Triffid_Hunter. Modified by Kliment and the Marlin team.
* Contributed by Triffid_Hunter and modified by Kliment, thinkyhead, Bob-the-Kuhn, et.al.
*/
#ifndef _FASTIO_TEENSY_H

80
Marlin/src/HAL/servo.h
Unescape Escape View File

@ -21,49 +21,49 @@
*/
/**
servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
Copyright (c) 2009 Michael Margolis. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
* Copyright (c) 2009 Michael Margolis. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/**
A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
The servos are pulsed in the background using the value most recently written using the write() method
Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached.
Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four.
The sequence used to seize timers is defined in timers.h
The methods are:
Servo - Class for manipulating servo motors connected to Arduino pins.
attach(pin ) - Attaches a servo motor to an i/o pin.
attach(pin, min, max ) - Attaches to a pin setting min and max values in microseconds
default min is 544, max is 2400
write() - Sets the servo angle in degrees. (invalid angle that is valid as pulse in microseconds is treated as microseconds)
writeMicroseconds() - Sets the servo pulse width in microseconds
read() - Gets the last written servo pulse width as an angle between 0 and 180.
readMicroseconds() - Gets the last written servo pulse width in microseconds. (was read_us() in first release)
attached() - Returns true if there is a servo attached.
detach() - Stops an attached servos from pulsing its i/o pin.
move(angle) - Sequence of attach(0), write(angle),
With DEACTIVATE_SERVOS_AFTER_MOVE wait SERVO_DELAY and detach.
*
* A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
* The servos are pulsed in the background using the value most recently written using the write() method
*
* Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached.
* Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four.
* The sequence used to seize timers is defined in timers.h
*
* The methods are:
*
* Servo - Class for manipulating servo motors connected to Arduino pins.
*
* attach(pin ) - Attaches a servo motor to an i/o pin.
* attach(pin, min, max ) - Attaches to a pin setting min and max values in microseconds
* default min is 544, max is 2400
*
* write() - Sets the servo angle in degrees. (invalid angle that is valid as pulse in microseconds is treated as microseconds)
* writeMicroseconds() - Sets the servo pulse width in microseconds
* read() - Gets the last written servo pulse width as an angle between 0 and 180.
* readMicroseconds() - Gets the last written servo pulse width in microseconds. (was read_us() in first release)
* attached() - Returns true if there is a servo attached.
* detach() - Stops an attached servos from pulsing its i/o pin.
* move(angle) - Sequence of attach(0), write(angle),
* With DEACTIVATE_SERVOS_AFTER_MOVE wait SERVO_DELAY and detach.
*/
#ifndef SERVO_H

32
Marlin/src/HAL/servo_private.h
Unescape Escape View File

@ -21,22 +21,22 @@
*/
/**
servo_private.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
Copyright (c) 2009 Michael Margolis. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* servo_private.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
* Copyright (c) 2009 Michael Margolis. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef SERVO_PRIVATE_H

5
Marlin/src/feature/dac/dac_mcp4728.cpp
Unescape Escape View File

@ -100,17 +100,18 @@ uint8_t mcp4728_setGain_all(uint8_t value) {
*/
uint16_t mcp4728_getValue(uint8_t channel) { return mcp4728_values[channel]; }
#if 0
/**
* Steph: Might be useful in the future
* Return Vout
*
*/
uint16_t mcp4728_getVout(uint8_t channel) {
uint32_t vref = 2048,
vOut = (vref * mcp4728_values[channel] * (_DAC_STEPPER_GAIN + 1)) / 4096;
if (vOut > defaultVDD) vOut = defaultVDD;
return vOut;
}
*/
#endif
/**
* Returns DAC values as a 0-100 percentage of drive strength

36
Marlin/src/feature/dac/stepper_dac.cpp
Unescape Escape View File

@ -21,24 +21,24 @@
*/
/**
stepper_dac.cpp - To set stepper current via DAC
Part of Marlin
Copyright (c) 2016 MarlinFirmware
Marlin is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Marlin is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Marlin. If not, see <http://www.gnu.org/licenses/>.
* stepper_dac.cpp - To set stepper current via DAC
*
* Part of Marlin
*
* Copyright (c) 2016 MarlinFirmware
*
* Marlin is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Marlin is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Marlin. If not, see <http://www.gnu.org/licenses/>.
*/
#include "../../inc/MarlinConfig.h"

36
Marlin/src/feature/dac/stepper_dac.h
Unescape Escape View File

@ -21,24 +21,24 @@
*/
/**
stepper_dac.h - To set stepper current via DAC
Part of Marlin
Copyright (c) 2016 MarlinFirmware
Marlin is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Marlin is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Marlin. If not, see <http://www.gnu.org/licenses/>.
* stepper_dac.h - To set stepper current via DAC
*
* Part of Marlin
*
* Copyright (c) 2016 MarlinFirmware
*
* Marlin is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Marlin is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Marlin. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef STEPPER_DAC_H

1
Marlin/src/gcode/feature/leds/M150.cpp
Unescape Escape View File

@ -44,7 +44,6 @@
* M150 P127 ; Set LED 50% brightness
* M150 P ; Set LED full brightness
*/
void GcodeSuite::M150() {
set_led_color(
parser.seen('R') ? (parser.has_value() ? parser.value_byte() : 255) : 0,

32
Marlin/src/libs/vector_3.cpp
Unescape Escape View File

@ -21,22 +21,22 @@
*/
/**
vector_3.cpp - Vector library for bed leveling
Copyright (c) 2012 Lars Brubaker. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* vector_3.cpp - Vector library for bed leveling
* Copyright (c) 2012 Lars Brubaker. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "../inc/MarlinConfig.h"

32
Marlin/src/libs/vector_3.h
Unescape Escape View File

@ -21,22 +21,22 @@
*/
/**
vector_3.cpp - Vector library for bed leveling
Copyright (c) 2012 Lars Brubaker. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* vector_3.cpp - Vector library for bed leveling
* Copyright (c) 2012 Lars Brubaker. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef VECTOR_3_H

3
Marlin/src/module/planner_bezier.cpp
Unescape Escape View File

@ -44,8 +44,7 @@
#define MAX_STEP 0.1
#define SIGMA 0.1
/* Compute the linear interpolation between to real numbers.
*/
// Compute the linear interpolation between two real numbers.
inline static float interp(float a, float b, float t) { return (1.0 - t) * a + t * b; }
/**

36
Marlin/src/module/stepper_indirection.h
Unescape Escape View File

@ -21,24 +21,24 @@
*/
/**
stepper_indirection.h - stepper motor driver indirection macros
to allow some stepper functions to be done via SPI/I2c instead of direct pin manipulation
Part of Marlin
Copyright (c) 2015 Dominik Wenger
Marlin is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Marlin is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Marlin. If not, see <http://www.gnu.org/licenses/>.
* stepper_indirection.h - stepper motor driver indirection macros
* to allow some stepper functions to be done via SPI/I2c instead of direct pin manipulation
* Part of Marlin
*
* Copyright (c) 2015 Dominik Wenger
*
* Marlin is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* at your option) any later version.
*
* Marlin is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Marlin. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef STEPPER_INDIRECTION_H

Write Preview
Loading…
Cancel
Save