Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1

Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
	Marlin/language.h
	Marlin/pins.h
	Marlin/ultralcd.cpp

ArduinoAddons/Arduino_0.xx/Gen6/bootloaders/atmega644p/ATmegaBOOT.c

@@ -168,7 +168,7 @@ int main(void)
     WDTCSR = 0;
 
     // Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot.
-    if (! (ch &  _BV(EXTRF))) // if its a not an external reset...
+    if (! (ch &  _BV(EXTRF))) // if it's a not an external reset...
       app_start();  // skip bootloader
 #endif
 

ArduinoAddons/Arduino_0.xx/Sanguino/boards.txt

@@ -14,3 +14,86 @@ sanguino.bootloader.lock_bits=0x0F
 sanguino.build.mcu=atmega644p
 sanguino.build.f_cpu=16000000L
 sanguino.build.core=arduino
+
+##############################################################
+
+atmega644.name=Sanguino W/ ATmega644P
+
+atmega644.upload.protocol=stk500
+atmega644.upload.maximum_size=63488
+atmega644.upload.speed=57600
+
+atmega644.bootloader.low_fuses=0xFF
+atmega644.bootloader.high_fuses=0x9A
+atmega644.bootloader.extended_fuses=0xFF
+atmega644.bootloader.path=atmega
+atmega644.bootloader.file=ATmegaBOOT_168_atmega644p.hex
+#atmega644.bootloader.file=ATmegaBOOT_644P.hex
+atmega644.bootloader.unlock_bits=0x3F
+atmega644.bootloader.lock_bits=0x0F
+
+atmega644.build.mcu=atmega644p
+atmega644.build.f_cpu=16000000L
+atmega644.build.core=arduino
+
+##############################################################
+
+atmega12848m.name=Sanguino W/ ATmega1284p 8mhz
+
+atmega12848m.upload.protocol=stk500
+atmega12848m.upload.maximum_size=131072
+atmega12848m.upload.speed=19200
+
+atmega12848m.bootloader.low_fuses=0xFD
+atmega12848m.bootloader.high_fuses=0x9A
+atmega12848m.bootloader.extended_fuses=0xFF
+atmega12848m.bootloader.path=atmega
+atmega12848m.bootloader.file=ATmegaBOOT_168_atmega1284p_8m.hex
+atmega12848m.bootloader.unlock_bits=0x3F
+atmega12848m.bootloader.lock_bits=0x0F
+
+atmega12848m.build.mcu=atmega1284p
+atmega12848m.build.f_cpu=8000000L
+atmega12848m.build.core=arduino
+
+##############################################################
+
+atmega1284.name=Sanguino W/ ATmega1284p 16mhz
+
+atmega1284.upload.protocol=stk500
+atmega1284.upload.maximum_size=131072
+atmega1284.upload.speed=57600
+
+atmega1284.bootloader.low_fuses=0xFF
+atmega1284.bootloader.high_fuses=0x9A
+atmega1284.bootloader.extended_fuses=0xFF
+atmega1284.bootloader.path=atmega
+atmega1284.bootloader.file=ATmegaBOOT_168_atmega1284p.hex
+atmega1284.bootloader.unlock_bits=0x3F
+atmega1284.bootloader.lock_bits=0x0F
+
+atmega1284.build.mcu=atmega1284p
+atmega1284.build.f_cpu=16000000L
+atmega1284.build.core=arduino
+
+
+##############################################################
+
+atmega1284s.name=Sanguino W/ ATmega1284p 20mhz
+
+atmega1284s.upload.protocol=stk500
+atmega1284s.upload.maximum_size=131072
+atmega1284s.upload.speed=57600
+
+atmega1284s.bootloader.low_fuses=0xFF
+atmega1284s.bootloader.high_fuses=0x9A
+atmega1284s.bootloader.extended_fuses=0xFF
+atmega1284s.bootloader.path=atmega
+atmega1284s.bootloader.file=ATmegaBOOT_168_atmega1284p.hex
+atmega1284s.bootloader.unlock_bits=0x3F
+atmega1284s.bootloader.lock_bits=0x0F
+
+atmega1284s.build.mcu=atmega1284p
+atmega1284s.build.f_cpu=20000000L
+atmega1284s.build.core=arduino
+#

ArduinoAddons/Arduino_0.xx/Sanguino/bootloaders/atmega1284p/Makefile

@@ -0,0 +1,470 @@
+# Makefile for ATmegaBOOT
+# E.Lins, 18.7.2005
+# $Id$
+#
+# Instructions
+#
+# To make bootloader .hex file:
+# make diecimila
+# make lilypad
+# make ng
+# etc...
+#
+# To burn bootloader .hex file:
+# make diecimila_isp
+# make lilypad_isp
+# make ng_isp
+# etc...
+
+# program name should not be changed...
+PROGRAM    = optiboot
+
+# The default behavior is to build using tools that are in the users
+# current path variables, but we can also build using an installed
+# Arduino user IDE setup, or the Arduino source tree.
+# Uncomment this next lines to build within the arduino environment,
+# using the arduino-included avrgcc toolset (mac and pc)
+# ENV ?= arduino
+# ENV ?= arduinodev
+# OS ?= macosx
+# OS ?= windows
+
+
+# enter the parameters for the avrdude isp tool
+ISPTOOL    = stk500v2
+ISPPORT    = usb
+ISPSPEED   = -b 115200
+
+MCU_TARGET = atmega168
+LDSECTIONS  = -Wl,--section-start=.text=0x3e00 -Wl,--section-start=.version=0x3ffe
+
+# Build environments
+# Start of some ugly makefile-isms to allow optiboot to be built
+# in several different environments.  See the README.TXT file for
+# details.
+
+# default
+fixpath = $(1)
+
+ifeq ($(ENV), arduino)
+# For Arduino, we assume that we're connected to the optiboot directory
+# included with the arduino distribution, which means that the full set
+# of avr-tools are "right up there" in standard places.
+TOOLROOT = ../../../tools
+GCCROOT = $(TOOLROOT)/avr/bin/
+AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf
+
+ifeq ($(OS), windows)
+# On windows, SOME of the tool paths will need to have backslashes instead
+# of forward slashes (because they use windows cmd.exe for execution instead
+# of a unix/mingw shell?)  We also have to ensure that a consistent shell
+# is used even if a unix shell is installed (ie as part of WINAVR)
+fixpath = $(subst /,\,$1)
+SHELL = cmd.exe
+endif
+
+else ifeq ($(ENV), arduinodev)
+# Arduino IDE source code environment.  Use the unpacked compilers created
+# by the build (you'll need to do "ant build" first.)
+ifeq ($(OS), macosx)
+TOOLROOT = ../../../../build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/tools
+endif
+ifeq ($(OS), windows)
+TOOLROOT = ../../../../build/windows/work/hardware/tools
+endif
+
+GCCROOT = $(TOOLROOT)/avr/bin/
+AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf
+
+else
+GCCROOT =
+AVRDUDE_CONF =
+endif
+#
+# End of build environment code.
+
+
+# the efuse should really be 0xf8; since, however, only the lower
+# three bits of that byte are used on the atmega168, avrdude gets
+# confused if you specify 1's for the higher bits, see:
+# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/
+#
+# similarly, the lock bits should be 0xff instead of 0x3f (to
+# unlock the bootloader section) and 0xcf instead of 0x2f (to
+# lock it), but since the high two bits of the lock byte are
+# unused, avrdude would get confused.
+
+ISPFUSES    = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \
+              -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
+              -e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m \
+              -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m
+ISPFLASH    = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \
+              -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
+              -U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x2f:m
+
+STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe"
+STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \
+-lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt
+STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt
+
+OBJ        = $(PROGRAM).o
+OPTIMIZE = -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls
+
+DEFS       = 
+LIBS       =
+
+CC         = $(GCCROOT)avr-gcc
+
+# Override is only needed by avr-lib build system.
+
+override CFLAGS        = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS)
+override LDFLAGS       = $(LDSECTIONS) -Wl,--relax -Wl,--gc-sections -nostartfiles -nostdlib
+
+OBJCOPY        = $(GCCROOT)avr-objcopy
+OBJDUMP        = $(call fixpath,$(GCCROOT)avr-objdump)
+
+SIZE           = $(GCCROOT)avr-size
+
+# Test platforms
+# Virtual boot block test
+virboot328: TARGET = atmega328
+virboot328: MCU_TARGET = atmega328p
+virboot328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DVIRTUAL_BOOT'
+virboot328: AVR_FREQ = 16000000L
+virboot328: LDSECTIONS  = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe
+virboot328: $(PROGRAM)_atmega328.hex
+virboot328: $(PROGRAM)_atmega328.lst
+
+# 20MHz clocked platforms
+#
+# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue)
+#
+
+pro20: TARGET = pro_20mhz
+pro20: MCU_TARGET = atmega168
+pro20: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+pro20: AVR_FREQ = 20000000L
+pro20: $(PROGRAM)_pro_20mhz.hex
+pro20: $(PROGRAM)_pro_20mhz.lst
+
+pro20_isp: pro20
+pro20_isp: TARGET = pro_20mhz
+# 2.7V brownout
+pro20_isp: HFUSE = DD
+# Full swing xtal (20MHz) 258CK/14CK+4.1ms
+pro20_isp: LFUSE = C6
+# 512 byte boot
+pro20_isp: EFUSE = 04
+pro20_isp: isp
+
+# 16MHz clocked platforms
+#
+# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue)
+#
+
+pro16: TARGET = pro_16MHz
+pro16: MCU_TARGET = atmega168
+pro16: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+pro16: AVR_FREQ = 16000000L
+pro16: $(PROGRAM)_pro_16MHz.hex
+pro16: $(PROGRAM)_pro_16MHz.lst
+
+pro16_isp: pro16
+pro16_isp: TARGET = pro_16MHz
+# 2.7V brownout
+pro16_isp: HFUSE = DD
+# Full swing xtal (20MHz) 258CK/14CK+4.1ms
+pro16_isp: LFUSE = C6
+# 512 byte boot
+pro16_isp: EFUSE = 04
+pro16_isp: isp
+
+# Diecimila, Duemilanove with m168, and NG use identical bootloaders
+# Call it "atmega168" for generality and clarity, keep "diecimila" for
+# backward compatibility of makefile
+#
+atmega168: TARGET = atmega168
+atmega168: MCU_TARGET = atmega168
+atmega168: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+atmega168: AVR_FREQ = 16000000L 
+atmega168: $(PROGRAM)_atmega168.hex
+atmega168: $(PROGRAM)_atmega168.lst
+
+atmega168_isp: atmega168
+atmega168_isp: TARGET = atmega168
+# 2.7V brownout
+atmega168_isp: HFUSE = DD
+# Low power xtal (16MHz) 16KCK/14CK+65ms
+atmega168_isp: LFUSE = FF
+# 512 byte boot
+atmega168_isp: EFUSE = 04
+atmega168_isp: isp
+
+diecimila: TARGET = diecimila
+diecimila: MCU_TARGET = atmega168
+diecimila: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+diecimila: AVR_FREQ = 16000000L 
+diecimila: $(PROGRAM)_diecimila.hex
+diecimila: $(PROGRAM)_diecimila.lst
+
+diecimila_isp: diecimila
+diecimila_isp: TARGET = diecimila
+# 2.7V brownout
+diecimila_isp: HFUSE = DD
+# Low power xtal (16MHz) 16KCK/14CK+65ms
+diecimila_isp: LFUSE = FF
+# 512 byte boot
+diecimila_isp: EFUSE = 04
+diecimila_isp: isp
+
+atmega328: TARGET = atmega328
+atmega328: MCU_TARGET = atmega328p
+atmega328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+atmega328: AVR_FREQ = 16000000L
+atmega328: LDSECTIONS  = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe
+atmega328: $(PROGRAM)_atmega328.hex
+atmega328: $(PROGRAM)_atmega328.lst
+
+atmega328_isp: atmega328
+atmega328_isp: TARGET = atmega328
+atmega328_isp: MCU_TARGET = atmega328p
+# 512 byte boot, SPIEN
+atmega328_isp: HFUSE = DE
+# Low power xtal (16MHz) 16KCK/14CK+65ms
+atmega328_isp: LFUSE = FF
+# 2.7V brownout
+atmega328_isp: EFUSE = 05
+atmega328_isp: isp
+
+atmega1284: TARGET = atmega1284p
+atmega1284: MCU_TARGET = atmega1284p
+atmega1284: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DBIGBOOT'
+atmega1284: AVR_FREQ = 16000000L
+atmega1284: LDSECTIONS  = -Wl,--section-start=.text=0x1fc00
+atmega1284: $(PROGRAM)_atmega1284p.hex
+atmega1284: $(PROGRAM)_atmega1284p.lst
+
+atmega1284_isp: atmega1284
+atmega1284_isp: TARGET = atmega1284p
+atmega1284_isp: MCU_TARGET = atmega1284p
+# 1024 byte boot
+atmega1284_isp: HFUSE = DE
+# Low power xtal (16MHz) 16KCK/14CK+65ms
+atmega1284_isp: LFUSE = FF
+# 2.7V brownout
+atmega1284_isp: EFUSE = FD
+atmega1284_isp: isp
+
+# Sanguino has a minimum boot size of 1024 bytes, so enable extra functions
+#
+sanguino: TARGET = atmega644p
+sanguino: MCU_TARGET = atmega644p
+sanguino: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DBIGBOOT'
+sanguino: AVR_FREQ = 16000000L
+sanguino: LDSECTIONS  = -Wl,--section-start=.text=0xfc00
+sanguino: $(PROGRAM)_atmega644p.hex
+sanguino: $(PROGRAM)_atmega644p.lst
+
+sanguino_isp: sanguino
+sanguino_isp: TARGET = atmega644p
+sanguino_isp: MCU_TARGET = atmega644p
+# 1024 byte boot
+sanguino_isp: HFUSE = DE
+# Low power xtal (16MHz) 16KCK/14CK+65ms
+sanguino_isp: LFUSE = FF
+# 2.7V brownout
+sanguino_isp: EFUSE = 05
+sanguino_isp: isp
+
+# Mega has a minimum boot size of 1024 bytes, so enable extra functions
+#mega: TARGET = atmega1280
+mega: MCU_TARGET = atmega1280
+mega: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DBIGBOOT'
+mega: AVR_FREQ = 16000000L
+mega: LDSECTIONS  = -Wl,--section-start=.text=0x1fc00
+mega: $(PROGRAM)_atmega1280.hex
+mega: $(PROGRAM)_atmega1280.lst
+
+mega_isp: mega
+mega_isp: TARGET = atmega1280
+mega_isp: MCU_TARGET = atmega1280
+# 1024 byte boot
+mega_isp: HFUSE = DE
+# Low power xtal (16MHz) 16KCK/14CK+65ms
+mega_isp: LFUSE = FF
+# 2.7V brownout
+mega_isp: EFUSE = 05
+mega_isp: isp
+
+# ATmega8
+#
+atmega8: TARGET = atmega8
+atmega8: MCU_TARGET = atmega8
+atmega8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+atmega8: AVR_FREQ = 16000000L 
+atmega8: LDSECTIONS  = -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe
+atmega8: $(PROGRAM)_atmega8.hex
+atmega8: $(PROGRAM)_atmega8.lst
+
+atmega8_isp: atmega8
+atmega8_isp: TARGET = atmega8
+atmega8_isp: MCU_TARGET = atmega8
+# SPIEN, CKOPT, Bootsize=512B
+atmega8_isp: HFUSE = CC
+# 2.7V brownout, Low power xtal (16MHz) 16KCK/14CK+65ms
+atmega8_isp: LFUSE = BF
+atmega8_isp: isp
+
+# ATmega88
+#
+atmega88: TARGET = atmega88
+atmega88: MCU_TARGET = atmega88
+atmega88: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+atmega88: AVR_FREQ = 16000000L 
+atmega88: LDSECTIONS  = -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe
+atmega88: $(PROGRAM)_atmega88.hex
+atmega88: $(PROGRAM)_atmega88.lst
+
+atmega88_isp: atmega88
+atmega88_isp: TARGET = atmega88
+atmega88_isp: MCU_TARGET = atmega88
+# 2.7V brownout
+atmega88_isp: HFUSE = DD
+# Low power xtal (16MHz) 16KCK/14CK+65ms
+atemga88_isp: LFUSE = FF
+# 512 byte boot
+atmega88_isp: EFUSE = 04
+atmega88_isp: isp
+
+
+# 8MHz clocked platforms
+#
+# These are capable of 115200 baud
+#
+
+lilypad: TARGET = lilypad
+lilypad: MCU_TARGET = atmega168
+lilypad: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+lilypad: AVR_FREQ = 8000000L
+lilypad: $(PROGRAM)_lilypad.hex
+lilypad: $(PROGRAM)_lilypad.lst
+
+lilypad_isp: lilypad
+lilypad_isp: TARGET = lilypad
+# 2.7V brownout
+lilypad_isp: HFUSE = DD
+# Internal 8MHz osc (8MHz) Slow rising power
+lilypad_isp: LFUSE = E2
+# 512 byte boot
+lilypad_isp: EFUSE = 04
+lilypad_isp: isp
+
+lilypad_resonator: TARGET = lilypad_resonator
+lilypad_resonator: MCU_TARGET = atmega168
+lilypad_resonator: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+lilypad_resonator: AVR_FREQ = 8000000L
+lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex
+lilypad_resonator: $(PROGRAM)_lilypad_resonator.lst
+
+lilypad_resonator_isp: lilypad_resonator
+lilypad_resonator_isp: TARGET = lilypad_resonator
+# 2.7V brownout
+lilypad_resonator_isp: HFUSE = DD
+# Full swing xtal (20MHz) 258CK/14CK+4.1ms
+lilypad_resonator_isp: LFUSE = C6
+# 512 byte boot
+lilypad_resonator_isp: EFUSE = 04
+lilypad_resonator_isp: isp
+
+pro8: TARGET = pro_8MHz
+pro8: MCU_TARGET = atmega168
+pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+pro8: AVR_FREQ = 8000000L
+pro8: $(PROGRAM)_pro_8MHz.hex
+pro8: $(PROGRAM)_pro_8MHz.lst
+
+pro8_isp: pro8
+pro8_isp: TARGET = pro_8MHz
+# 2.7V brownout
+pro8_isp: HFUSE = DD
+# Full swing xtal (20MHz) 258CK/14CK+4.1ms
+pro8_isp: LFUSE = C6
+# 512 byte boot
+pro8_isp: EFUSE = 04
+pro8_isp: isp
+
+atmega328_pro8: TARGET = atmega328_pro_8MHz
+atmega328_pro8: MCU_TARGET = atmega328p
+atmega328_pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+atmega328_pro8: AVR_FREQ = 8000000L
+atmega328_pro8: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe
+atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex
+atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.lst
+
+atmega328_pro8_isp: atmega328_pro8
+atmega328_pro8_isp: TARGET = atmega328_pro_8MHz
+atmega328_pro8_isp: MCU_TARGET = atmega328p
+# 512 byte boot, SPIEN
+atmega328_pro8_isp: HFUSE = DE
+# Low power xtal (16MHz) 16KCK/14CK+65ms
+atmega328_pro8_isp: LFUSE = FF
+# 2.7V brownout
+atmega328_pro8_isp: EFUSE = 05
+atmega328_pro8_isp: isp
+
+# 1MHz clocked platforms
+#
+# These are capable of 9600 baud
+#
+
+luminet: TARGET = luminet
+luminet: MCU_TARGET = attiny84
+luminet: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=9600'
+luminet: CFLAGS += '-DVIRTUAL_BOOT_PARTITION'
+luminet: AVR_FREQ = 1000000L
+luminet: LDSECTIONS = -Wl,--section-start=.text=0x1d00 -Wl,--section-start=.version=0x1efe
+luminet: $(PROGRAM)_luminet.hex
+luminet: $(PROGRAM)_luminet.lst
+
+luminet_isp: luminet
+luminet_isp: TARGET = luminet
+luminet_isp: MCU_TARGET = attiny84
+# Brownout disabled
+luminet_isp: HFUSE = DF
+# 1MHz internal oscillator, slowly rising power
+luminet_isp: LFUSE = 62
+# Self-programming enable
+luminet_isp: EFUSE = FE
+luminet_isp: isp
+
+#
+# Generic build instructions
+#
+#
+
+isp: $(TARGET)
+        $(ISPFUSES)
+        $(ISPFLASH)
+
+isp-stk500: $(PROGRAM)_$(TARGET).hex
+        $(STK500-1)
+        $(STK500-2)
+
+%.elf: $(OBJ)
+        $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
+        $(SIZE) $@
+
+clean:
+        rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex
+
+%.lst: %.elf
+        $(OBJDUMP) -h -S $< > $@
+
+%.hex: %.elf
+        $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O ihex $< $@
+
+%.srec: %.elf
+        $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O srec $< $@
+
+%.bin: %.elf
+        $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O binary $< $@

ArduinoAddons/Arduino_0.xx/Sanguino/bootloaders/atmega1284p/boot.h

@@ -0,0 +1,848 @@
+/* Modified to use out for SPM access
+** Peter Knight, Optiboot project http://optiboot.googlecode.com
+**
+** Todo: Tidy up
+**
+** "_short" routines execute 1 cycle faster and use 1 less word of flash
+** by using "out" instruction instead of "sts".
+**
+** Additional elpm variants that trust the value of RAMPZ
+*/
+
+/* Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007  Eric B. Weddington
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+
+   * Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   * Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+   * Neither the name of the copyright holders nor the names of
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE. */
+
+/* $Id: boot.h,v 1.27.2.3 2008/09/30 13:58:48 arcanum Exp $ */
+
+#ifndef _AVR_BOOT_H_
+#define _AVR_BOOT_H_    1
+
+/** \file */
+/** \defgroup avr_boot <avr/boot.h>: Bootloader Support Utilities
+    \code
+    #include <avr/io.h>
+    #include <avr/boot.h>
+    \endcode
+
+    The macros in this module provide a C language interface to the
+    bootloader support functionality of certain AVR processors. These
+    macros are designed to work with all sizes of flash memory.
+
+    Global interrupts are not automatically disabled for these macros. It
+    is left up to the programmer to do this. See the code example below. 
+    Also see the processor datasheet for caveats on having global interrupts 
+    enabled during writing of the Flash.
+
+    \note Not all AVR processors provide bootloader support. See your
+    processor datasheet to see if it provides bootloader support.
+
+    \todo From email with Marek: On smaller devices (all except ATmega64/128),
+    __SPM_REG is in the I/O space, accessible with the shorter "in" and "out"
+    instructions - since the boot loader has a limited size, this could be an
+    important optimization.
+
+    \par API Usage Example
+    The following code shows typical usage of the boot API.
+
+    \code
+    #include <inttypes.h>
+    #include <avr/interrupt.h>
+    #include <avr/pgmspace.h>
+    
+    void boot_program_page (uint32_t page, uint8_t *buf)
+    {
+        uint16_t i;
+        uint8_t sreg;
+
+        // Disable interrupts.
+
+        sreg = SREG;
+        cli();
+    
+        eeprom_busy_wait ();
+
+        boot_page_erase (page);
+        boot_spm_busy_wait ();      // Wait until the memory is erased.
+
+        for (i=0; i<SPM_PAGESIZE; i+=2)
+        {
+            // Set up little-endian word.
+
+            uint16_t w = *buf++;
+            w += (*buf++) << 8;
+        
+            boot_page_fill (page + i, w);
+        }
+
+        boot_page_write (page);     // Store buffer in flash page.
+        boot_spm_busy_wait();       // Wait until the memory is written.
+
+        // Reenable RWW-section again. We need this if we want to jump back
+        // to the application after bootloading.
+
+        boot_rww_enable ();
+
+        // Re-enable interrupts (if they were ever enabled).
+
+        SREG = sreg;
+    }\endcode */
+
+#include <avr/eeprom.h>
+#include <avr/io.h>
+#include <inttypes.h>
+#include <limits.h>
+
+/* Check for SPM Control Register in processor. */
+#if defined (SPMCSR)
+#  define __SPM_REG    SPMCSR
+#elif defined (SPMCR)
+#  define __SPM_REG    SPMCR
+#else
+#  error AVR processor does not provide bootloader support!
+#endif
+
+
+/* Check for SPM Enable bit. */
+#if defined(SPMEN)
+#  define __SPM_ENABLE  SPMEN
+#elif defined(SELFPRGEN)
+#  define __SPM_ENABLE  SELFPRGEN
+#else
+#  error Cannot find SPM Enable bit definition!
+#endif
+
+/** \ingroup avr_boot
+    \def BOOTLOADER_SECTION
+
+    Used to declare a function or variable to be placed into a
+    new section called .bootloader. This section and its contents
+    can then be relocated to any address (such as the bootloader
+    NRWW area) at link-time. */
+
+#define BOOTLOADER_SECTION    __attribute__ ((section (".bootloader")))
+
+/* Create common bit definitions. */
+#ifdef ASB
+#define __COMMON_ASB    ASB
+#else
+#define __COMMON_ASB    RWWSB
+#endif
+
+#ifdef ASRE
+#define __COMMON_ASRE   ASRE
+#else
+#define __COMMON_ASRE   RWWSRE
+#endif
+
+/* Define the bit positions of the Boot Lock Bits. */
+
+#define BLB12           5
+#define BLB11           4
+#define BLB02           3
+#define BLB01           2
+
+/** \ingroup avr_boot
+    \def boot_spm_interrupt_enable()
+    Enable the SPM interrupt. */
+
+#define boot_spm_interrupt_enable()   (__SPM_REG |= (uint8_t)_BV(SPMIE))
+
+/** \ingroup avr_boot
+    \def boot_spm_interrupt_disable()
+    Disable the SPM interrupt. */
+
+#define boot_spm_interrupt_disable()  (__SPM_REG &= (uint8_t)~_BV(SPMIE))
+
+/** \ingroup avr_boot
+    \def boot_is_spm_interrupt()
+    Check if the SPM interrupt is enabled. */
+
+#define boot_is_spm_interrupt()       (__SPM_REG & (uint8_t)_BV(SPMIE))
+
+/** \ingroup avr_boot
+    \def boot_rww_busy()
+    Check if the RWW section is busy. */
+
+#define boot_rww_busy()          (__SPM_REG & (uint8_t)_BV(__COMMON_ASB))
+
+/** \ingroup avr_boot
+    \def boot_spm_busy()
+    Check if the SPM instruction is busy. */
+
+#define boot_spm_busy()               (__SPM_REG & (uint8_t)_BV(__SPM_ENABLE))
+
+/** \ingroup avr_boot
+    \def boot_spm_busy_wait()
+    Wait while the SPM instruction is busy. */
+
+#define boot_spm_busy_wait()          do{}while(boot_spm_busy())
+
+#define __BOOT_PAGE_ERASE         (_BV(__SPM_ENABLE) | _BV(PGERS))
+#define __BOOT_PAGE_WRITE         (_BV(__SPM_ENABLE) | _BV(PGWRT))
+#define __BOOT_PAGE_FILL          _BV(__SPM_ENABLE)
+#define __BOOT_RWW_ENABLE         (_BV(__SPM_ENABLE) | _BV(__COMMON_ASRE))
+#define __BOOT_LOCK_BITS_SET      (_BV(__SPM_ENABLE) | _BV(BLBSET))
+
+#define __boot_page_fill_short(address, data)   \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "movw  r0, %3\n\t"                       \
+        "out %0, %1\n\t"                         \
+        "spm\n\t"                                \
+        "clr  r1\n\t"                            \
+        :                                        \
+        : "i" (_SFR_IO_ADDR(__SPM_REG)),        \
+          "r" ((uint8_t)__BOOT_PAGE_FILL),       \
+          "z" ((uint16_t)address),               \
+          "r" ((uint16_t)data)                   \
+        : "r0"                                   \
+    );                                           \
+}))
+
+#define __boot_page_fill_normal(address, data)   \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "movw  r0, %3\n\t"                       \
+        "sts %0, %1\n\t"                         \
+        "spm\n\t"                                \
+        "clr  r1\n\t"                            \
+        :                                        \
+        : "i" (_SFR_MEM_ADDR(__SPM_REG)),        \
+          "r" ((uint8_t)__BOOT_PAGE_FILL),       \
+          "z" ((uint16_t)address),               \
+          "r" ((uint16_t)data)                   \
+        : "r0"                                   \
+    );                                           \
+}))
+
+#define __boot_page_fill_alternate(address, data)\
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "movw  r0, %3\n\t"                       \
+        "sts %0, %1\n\t"                         \
+        "spm\n\t"                                \
+        ".word 0xffff\n\t"                       \
+        "nop\n\t"                                \
+        "clr  r1\n\t"                            \
+        :                                        \
+        : "i" (_SFR_MEM_ADDR(__SPM_REG)),        \
+          "r" ((uint8_t)__BOOT_PAGE_FILL),       \
+          "z" ((uint16_t)address),               \
+          "r" ((uint16_t)data)                   \
+        : "r0"                                   \
+    );                                           \
+}))
+
+#define __boot_page_fill_extended(address, data) \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "movw  r0, %4\n\t"                       \
+        "movw r30, %A3\n\t"                      \
+        "sts %1, %C3\n\t"                        \
+        "sts %0, %2\n\t"                         \
+        "spm\n\t"                                \
+        "clr  r1\n\t"                            \
+        :                                        \
+        : "i" (_SFR_MEM_ADDR(__SPM_REG)),        \
+          "i" (_SFR_MEM_ADDR(RAMPZ)),            \
+          "r" ((uint8_t)__BOOT_PAGE_FILL),       \
+          "r" ((uint32_t)address),               \
+          "r" ((uint16_t)data)                   \
+        : "r0", "r30", "r31"                     \
+    );                                           \
+}))
+
+#define __boot_page_fill_extended_short(address, data) \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "movw  r0, %4\n\t"                       \
+        "movw r30, %A3\n\t"                      \
+        "out %1, %C3\n\t"                        \
+        "out %0, %2\n\t"                         \
+        "spm\n\t"                                \
+        "clr  r1\n\t"                            \
+        :                                        \
+        : "i" (_SFR_IO_ADDR(__SPM_REG)),        \
+          "i" (_SFR_IO_ADDR(RAMPZ)),            \
+          "r" ((uint8_t)__BOOT_PAGE_FILL),       \
+          "r" ((uint32_t)address),               \
+          "r" ((uint16_t)data)                   \
+        : "r0", "r30", "r31"                     \
+    );                                           \
+}))
+
+#define __boot_page_erase_short(address)        \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "out %0, %1\n\t"                         \
+        "spm\n\t"                                \
+        :                                        \
+        : "i" (_SFR_IO_ADDR(__SPM_REG)),        \
+          "r" ((uint8_t)__BOOT_PAGE_ERASE),      \
+          "z" ((uint16_t)address)                \
+    );                                           \
+}))
+
+
+#define __boot_page_erase_normal(address)        \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "sts %0, %1\n\t"                         \
+        "spm\n\t"                                \
+        :                                        \
+        : "i" (_SFR_MEM_ADDR(__SPM_REG)),        \
+          "r" ((uint8_t)__BOOT_PAGE_ERASE),      \
+          "z" ((uint16_t)address)                \
+    );                                           \
+}))
+
+#define __boot_page_erase_alternate(address)     \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "sts %0, %1\n\t"                         \
+        "spm\n\t"                                \
+        ".word 0xffff\n\t"                       \
+        "nop\n\t"                                \
+        :                                        \
+        : "i" (_SFR_MEM_ADDR(__SPM_REG)),        \
+          "r" ((uint8_t)__BOOT_PAGE_ERASE),      \
+          "z" ((uint16_t)address)                \
+    );                                           \
+}))
+
+#define __boot_page_erase_extended(address)      \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "movw r30, %A3\n\t"                      \
+        "sts  %1, %C3\n\t"                       \
+        "sts %0, %2\n\t"                         \
+        "spm\n\t"                                \
+        :                                        \
+        : "i" (_SFR_MEM_ADDR(__SPM_REG)),        \
+          "i" (_SFR_MEM_ADDR(RAMPZ)),            \
+          "r" ((uint8_t)__BOOT_PAGE_ERASE),      \
+          "r" ((uint32_t)address)                \
+        : "r30", "r31"                           \
+    );                                           \
+}))
+#define __boot_page_erase_extended_short(address)      \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "movw r30, %A3\n\t"                      \
+        "out  %1, %C3\n\t"                       \
+        "out %0, %2\n\t"                         \
+        "spm\n\t"                                \
+        :                                        \
+        : "i" (_SFR_IO_ADDR(__SPM_REG)),        \
+          "i" (_SFR_IO_ADDR(RAMPZ)),            \
+          "r" ((uint8_t)__BOOT_PAGE_ERASE),      \
+          "r" ((uint32_t)address)                \
+        : "r30", "r31"                           \
+    );                                           \
+}))
+
+#define __boot_page_write_short(address)        \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "out %0, %1\n\t"                         \
+        "spm\n\t"                                \
+        :                                        \
+        : "i" (_SFR_IO_ADDR(__SPM_REG)),        \
+          "r" ((uint8_t)__BOOT_PAGE_WRITE),      \
+          "z" ((uint16_t)address)                \
+    );                                           \
+}))
+
+#define __boot_page_write_normal(address)        \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "sts %0, %1\n\t"                         \
+        "spm\n\t"                                \
+        :                                        \
+        : "i" (_SFR_MEM_ADDR(__SPM_REG)),        \
+          "r" ((uint8_t)__BOOT_PAGE_WRITE),      \
+          "z" ((uint16_t)address)                \
+    );                                           \
+}))
+
+#define __boot_page_write_alternate(address)     \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "sts %0, %1\n\t"                         \
+        "spm\n\t"                                \
+        ".word 0xffff\n\t"                       \
+        "nop\n\t"                                \
+        :                                        \
+        : "i" (_SFR_MEM_ADDR(__SPM_REG)),        \
+          "r" ((uint8_t)__BOOT_PAGE_WRITE),      \
+          "z" ((uint16_t)address)                \
+    );                                           \
+}))
+
+#define __boot_page_write_extended(address)      \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "movw r30, %A3\n\t"                      \
+        "sts %1, %C3\n\t"                        \
+        "sts %0, %2\n\t"                         \
+        "spm\n\t"                                \
+        :                                        \
+        : "i" (_SFR_MEM_ADDR(__SPM_REG)),        \
+          "i" (_SFR_MEM_ADDR(RAMPZ)),            \
+          "r" ((uint8_t)__BOOT_PAGE_WRITE),      \
+          "r" ((uint32_t)address)                \
+        : "r30", "r31"                           \
+    );                                           \
+}))
+#define __boot_page_write_extended_short(address)      \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "movw r30, %A3\n\t"                      \
+        "out %1, %C3\n\t"                        \
+        "out %0, %2\n\t"                         \
+        "spm\n\t"                                \
+        :                                        \
+        : "i" (_SFR_IO_ADDR(__SPM_REG)),        \
+          "i" (_SFR_IO_ADDR(RAMPZ)),            \
+          "r" ((uint8_t)__BOOT_PAGE_WRITE),      \
+          "r" ((uint32_t)address)                \
+        : "r30", "r31"                           \
+    );                                           \
+}))
+
+#define __boot_rww_enable_short()                      \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "out %0, %1\n\t"                         \
+        "spm\n\t"                                \
+        :                                        \
+        : "i" (_SFR_IO_ADDR(__SPM_REG)),        \
+          "r" ((uint8_t)__BOOT_RWW_ENABLE)       \
+    );                                           \
+}))
+
+#define __boot_rww_enable()                      \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "sts %0, %1\n\t"                         \
+        "spm\n\t"                                \
+        :                                        \
+        : "i" (_SFR_MEM_ADDR(__SPM_REG)),        \
+          "r" ((uint8_t)__BOOT_RWW_ENABLE)       \
+    );                                           \
+}))
+
+#define __boot_rww_enable_alternate()            \
+(__extension__({                                 \
+    __asm__ __volatile__                         \
+    (                                            \
+        "sts %0, %1\n\t"                         \
+        "spm\n\t"                                \
+        ".word 0xffff\n\t"                       \
+        "nop\n\t"                                \
+        :                                        \
+        : "i" (_SFR_MEM_ADDR(__SPM_REG)),        \
+          "r" ((uint8_t)__BOOT_RWW_ENABLE)       \
+    );                                           \
+}))
+
+/* From the mega16/mega128 data sheets (maybe others):
+
+     Bits by SPM To set the Boot Loader Lock bits, write the desired data to
+     R0, write "X0001001" to SPMCR and execute SPM within four clock cycles
+     after writing SPMCR. The only accessible Lock bits are the Boot Lock bits
+     that may prevent the Application and Boot Loader section from any
+     software update by the MCU.
+
+     If bits 5..2 in R0 are cleared (zero), the corresponding Boot Lock bit
+     will be programmed if an SPM instruction is executed within four cycles
+     after BLBSET and SPMEN (or SELFPRGEN) are set in SPMCR. The Z-pointer is 
+     don't care during this operation, but for future compatibility it is 
+     recommended to load the Z-pointer with $0001 (same as used for reading the 
+     Lock bits). For future compatibility It is also recommended to set bits 7, 
+     6, 1, and 0 in R0 to 1 when writing the Lock bits. When programming the 
+     Lock bits the entire Flash can be read during the operation. */
+
+#define __boot_lock_bits_set_short(lock_bits)                    \
+(__extension__({                                           \
+    uint8_t value = (uint8_t)(~(lock_bits));               \
+    __asm__ __volatile__                                   \
+    (                                                      \
+        "ldi r30, 1\n\t"                                   \
+        "ldi r31, 0\n\t"                                   \
+        "mov r0, %2\n\t"                                   \
+        "out %0, %1\n\t"                                   \
+        "spm\n\t"                                          \
+        :                                                  \
+        : "i" (_SFR_IO_ADDR(__SPM_REG)),                  \
+          "r" ((uint8_t)__BOOT_LOCK_BITS_SET),             \
+          "r" (value)                                      \
+        : "r0", "r30", "r31"                               \
+    );                                                     \
+}))
+
+#define __boot_lock_bits_set(lock_bits)                    \
+(__extension__({                                           \
+    uint8_t value = (uint8_t)(~(lock_bits));               \
+    __asm__ __volatile__                                   \
+    (                                                      \
+        "ldi r30, 1\n\t"                                   \
+        "ldi r31, 0\n\t"                                   \
+        "mov r0, %2\n\t"                                   \
+        "sts %0, %1\n\t"                                   \
+        "spm\n\t"                                          \
+        :                                                  \
+        : "i" (_SFR_MEM_ADDR(__SPM_REG)),                  \
+          "r" ((uint8_t)__BOOT_LOCK_BITS_SET),             \
+          "r" (value)                                      \
+        : "r0", "r30", "r31"                               \
+    );                                                     \
+}))
+
+#define __boot_lock_bits_set_alternate(lock_bits)          \
+(__extension__({                                           \
+    uint8_t value = (uint8_t)(~(lock_bits));               \
+    __asm__ __volatile__                                   \
+    (                                                      \
+        "ldi r30, 1\n\t"                                   \
+        "ldi r31, 0\n\t"                                   \
+        "mov r0, %2\n\t"                                   \
+        "sts %0, %1\n\t"                                   \
+        "spm\n\t"                                          \
+        ".word 0xffff\n\t"                                 \
+        "nop\n\t"                                          \
+        :                                                  \
+        : "i" (_SFR_MEM_ADDR(__SPM_REG)),                  \
+          "r" ((uint8_t)__BOOT_LOCK_BITS_SET),             \
+          "r" (value)                                      \
+        : "r0", "r30", "r31"                               \
+    );                                                     \
+}))
+
+/*
+   Reading lock and fuse bits:
+
+     Similarly to writing the lock bits above, set BLBSET and SPMEN (or 
+     SELFPRGEN) bits in __SPMREG, and then (within four clock cycles) issue an 
+     LPM instruction.
+
+     Z address:       contents:
+     0x0000           low fuse bits
+     0x0001           lock bits
+     0x0002           extended fuse bits
+     0x0003           high fuse bits
+
+     Sounds confusing, doesn't it?
+
+     Unlike the macros in pgmspace.h, no need to care for non-enhanced
+     cores here as these old cores do not provide SPM support anyway.
+ */
+
+/** \ingroup avr_boot
+    \def GET_LOW_FUSE_BITS
+    address to read the low fuse bits, using boot_lock_fuse_bits_get
+ */
+#define GET_LOW_FUSE_BITS           (0x0000)
+/** \ingroup avr_boot
+    \def GET_LOCK_BITS
+    address to read the lock bits, using boot_lock_fuse_bits_get
+ */
+#define GET_LOCK_BITS               (0x0001)
+/** \ingroup avr_boot
+    \def GET_EXTENDED_FUSE_BITS
+    address to read the extended fuse bits, using boot_lock_fuse_bits_get
+ */
+#define GET_EXTENDED_FUSE_BITS      (0x0002)
+/** \ingroup avr_boot
+    \def GET_HIGH_FUSE_BITS
+    address to read the high fuse bits, using boot_lock_fuse_bits_get
+ */
+#define GET_HIGH_FUSE_BITS          (0x0003)
+
+/** \ingroup avr_boot
+    \def boot_lock_fuse_bits_get(address)
+
+    Read the lock or fuse bits at \c address.
+
+    Parameter \c address can be any of GET_LOW_FUSE_BITS,
+    GET_LOCK_BITS, GET_EXTENDED_FUSE_BITS, or GET_HIGH_FUSE_BITS.
+
+    \note The lock and fuse bits returned are the physical values,
+    i.e. a bit returned as 0 means the corresponding fuse or lock bit
+    is programmed.
+ */
+#define boot_lock_fuse_bits_get_short(address)                   \
+(__extension__({                                           \
+    uint8_t __result;                                      \
+    __asm__ __volatile__                                   \
+    (                                                      \
+        "ldi r30, %3\n\t"                                  \
+        "ldi r31, 0\n\t"                                   \
+        "out %1, %2\n\t"                                   \
+        "lpm %0, Z\n\t"                                    \
+        : "=r" (__result)                                  \
+        : "i" (_SFR_IO_ADDR(__SPM_REG)),                  \
+          "r" ((uint8_t)__BOOT_LOCK_BITS_SET),             \
+          "M" (address)                                    \
+        : "r0", "r30", "r31"                               \
+    );                                                     \
+    __result;                                              \
+}))
+
+#define boot_lock_fuse_bits_get(address)                   \
+(__extension__({                                           \
+    uint8_t __result;                                      \
+    __asm__ __volatile__                                   \
+    (                                                      \
+        "ldi r30, %3\n\t"                                  \
+        "ldi r31, 0\n\t"                                   \
+        "sts %1, %2\n\t"                                   \
+        "lpm %0, Z\n\t"                                    \
+        : "=r" (__result)                                  \
+        : "i" (_SFR_MEM_ADDR(__SPM_REG)),                  \
+          "r" ((uint8_t)__BOOT_LOCK_BITS_SET),             \
+          "M" (address)                                    \
+        : "r0", "r30", "r31"                               \
+    );                                                     \
+    __result;                                              \
+}))
+
+/** \ingroup avr_boot
+    \def boot_signature_byte_get(address)
+
+    Read the Signature Row byte at \c address.  For some MCU types,
+    this function can also retrieve the factory-stored oscillator
+    calibration bytes.
+
+    Parameter \c address can be 0-0x1f as documented by the datasheet.
+    \note The values are MCU type dependent.
+*/
+
+#define __BOOT_SIGROW_READ (_BV(__SPM_ENABLE) | _BV(SIGRD))
+
+#define boot_signature_byte_get_short(addr) \
+(__extension__({                      \
+      uint16_t __addr16 = (uint16_t)(addr);     \
+      uint8_t __result;                         \
+      __asm__ __volatile__                      \
+      (                                         \
+        "out %1, %2\n\t"                        \
+        "lpm %0, Z" "\n\t"                      \
+        : "=r" (__result)                       \
+        : "i" (_SFR_IO_ADDR(__SPM_REG)),        \
+          "r" ((uint8_t) __BOOT_SIGROW_READ),   \
+          "z" (__addr16)                        \
+      );                                        \
+      __result;                                 \
+}))
+
+#define boot_signature_byte_get(addr) \
+(__extension__({                      \
+      uint16_t __addr16 = (uint16_t)(addr);     \
+      uint8_t __result;                         \
+      __asm__ __volatile__                      \
+      (                                         \
+        "sts %1, %2\n\t"                        \
+        "lpm %0, Z" "\n\t"                      \
+        : "=r" (__result)                       \
+        : "i" (_SFR_MEM_ADDR(__SPM_REG)),       \
+          "r" ((uint8_t) __BOOT_SIGROW_READ),   \
+          "z" (__addr16)                        \
+      );                                        \
+      __result;                                 \
+}))
+
+/** \ingroup avr_boot
+    \def boot_page_fill(address, data)
+
+    Fill the bootloader temporary page buffer for flash 
+    address with data word. 
+
+    \note The address is a byte address. The data is a word. The AVR 
+    writes data to the buffer a word at a time, but addresses the buffer
+    per byte! So, increment your address by 2 between calls, and send 2
+    data bytes in a word format! The LSB of the data is written to the lower 
+    address; the MSB of the data is written to the higher address.*/
+
+/** \ingroup avr_boot
+    \def boot_page_erase(address)
+
+    Erase the flash page that contains address.
+
+    \note address is a byte address in flash, not a word address. */
+
+/** \ingroup avr_boot
+    \def boot_page_write(address)
+
+    Write the bootloader temporary page buffer 
+    to flash page that contains address.
+    
+    \note address is a byte address in flash, not a word address. */
+
+/** \ingroup avr_boot
+    \def boot_rww_enable()
+
+    Enable the Read-While-Write memory section. */
+
+/** \ingroup avr_boot
+    \def boot_lock_bits_set(lock_bits)
+
+    Set the bootloader lock bits.
+
+    \param lock_bits A mask of which Boot Loader Lock Bits to set.
+
+    \note In this context, a 'set bit' will be written to a zero value.
+    Note also that only BLBxx bits can be programmed by this command.
+
+    For example, to disallow the SPM instruction from writing to the Boot
+    Loader memory section of flash, you would use this macro as such:
+
+    \code
+    boot_lock_bits_set (_BV (BLB11));
+    \endcode
+
+    \note Like any lock bits, the Boot Loader Lock Bits, once set,
+    cannot be cleared again except by a chip erase which will in turn
+    also erase the boot loader itself. */
+
+/* Normal versions of the macros use 16-bit addresses.
+   Extended versions of the macros use 32-bit addresses.
+   Alternate versions of the macros use 16-bit addresses and require special
+   instruction sequences after LPM.
+
+   FLASHEND is defined in the ioXXXX.h file.
+   USHRT_MAX is defined in <limits.h>. */ 
+
+#if defined(__AVR_ATmega161__) || defined(__AVR_ATmega163__) \
+    || defined(__AVR_ATmega323__)
+
+/* Alternate: ATmega161/163/323 and 16 bit address */
+#define boot_page_fill(address, data) __boot_page_fill_alternate(address, data)
+#define boot_page_erase(address)      __boot_page_erase_alternate(address)
+#define boot_page_write(address)      __boot_page_write_alternate(address)
+#define boot_rww_enable()             __boot_rww_enable_alternate()
+#define boot_lock_bits_set(lock_bits) __boot_lock_bits_set_alternate(lock_bits)
+
+#elif (FLASHEND > USHRT_MAX)
+
+/* Extended: >16 bit address */
+#define boot_page_fill(address, data) __boot_page_fill_extended_short(address, data)
+#define boot_page_erase(address)      __boot_page_erase_extended_short(address)
+#define boot_page_write(address)      __boot_page_write_extended_short(address)
+#define boot_rww_enable()             __boot_rww_enable_short()
+#define boot_lock_bits_set(lock_bits) __boot_lock_bits_set_short(lock_bits)
+
+#else
+
+/* Normal: 16 bit address */
+#define boot_page_fill(address, data) __boot_page_fill_short(address, data)
+#define boot_page_erase(address)      __boot_page_erase_short(address)
+#define boot_page_write(address)      __boot_page_write_short(address)
+#define boot_rww_enable()             __boot_rww_enable_short()
+#define boot_lock_bits_set(lock_bits) __boot_lock_bits_set_short(lock_bits)
+
+#endif
+
+/** \ingroup avr_boot
+
+    Same as boot_page_fill() except it waits for eeprom and spm operations to
+    complete before filling the page. */
+
+#define boot_page_fill_safe(address, data) \
+do { \
+    boot_spm_busy_wait();                       \
+    eeprom_busy_wait();                         \
+    boot_page_fill(address, data);              \
+} while (0)
+
+/** \ingroup avr_boot
+
+    Same as boot_page_erase() except it waits for eeprom and spm operations to
+    complete before erasing the page. */
+
+#define boot_page_erase_safe(address) \
+do { \
+    boot_spm_busy_wait();                       \
+    eeprom_busy_wait();                         \
+    boot_page_erase (address);                  \
+} while (0)
+
+/** \ingroup avr_boot
+
+    Same as boot_page_write() except it waits for eeprom and spm operations to
+    complete before writing the page. */
+
+#define boot_page_write_safe(address) \
+do { \
+    boot_spm_busy_wait();                       \
+    eeprom_busy_wait();                         \
+    boot_page_write (address);                  \
+} while (0)
+
+/** \ingroup avr_boot
+
+    Same as boot_rww_enable() except waits for eeprom and spm operations to
+    complete before enabling the RWW mameory. */
+
+#define boot_rww_enable_safe() \
+do { \
+    boot_spm_busy_wait();                       \
+    eeprom_busy_wait();                         \
+    boot_rww_enable();                          \
+} while (0)
+
+/** \ingroup avr_boot
+
+    Same as boot_lock_bits_set() except waits for eeprom and spm operations to
+    complete before setting the lock bits. */
+
+#define boot_lock_bits_set_safe(lock_bits) \
+do { \
+    boot_spm_busy_wait();                       \
+    eeprom_busy_wait();                         \
+    boot_lock_bits_set (lock_bits);             \
+} while (0)
+
+#endif /* _AVR_BOOT_H_ */

ArduinoAddons/Arduino_0.xx/Sanguino/bootloaders/atmega1284p/optiboot.c

@@ -0,0 +1,724 @@
+/**********************************************************/
+/* -Wl,-section-start=bootloader=0x1fc00 */
+/* Optiboot bootloader for Arduino                        */
+/*                                                        */
+/* http://optiboot.googlecode.com                         */
+/*                                                        */
+/* Arduino-maintained version : See README.TXT            */
+/* http://code.google.com/p/arduino/                      */
+/*                                                        */
+/* Heavily optimised bootloader that is faster and        */
+/* smaller than the Arduino standard bootloader           */
+/*                                                        */
+/* Enhancements:                                          */
+/*   Fits in 512 bytes, saving 1.5K of code space         */
+/*   Background page erasing speeds up programming        */
+/*   Higher baud rate speeds up programming               */
+/*   Written almost entirely in C                         */
+/*   Customisable timeout with accurate timeconstant      */
+/*   Optional virtual UART. No hardware UART required.    */
+/*   Optional virtual boot partition for devices without. */
+/*                                                        */
+/* What you lose:                                         */
+/*   Implements a skeleton STK500 protocol which is       */
+/*     missing several features including EEPROM          */
+/*     programming and non-page-aligned writes            */
+/*   High baud rate breaks compatibility with standard    */
+/*     Arduino flash settings                             */
+/*                                                        */
+/* Fully supported:                                       */
+/*   ATmega168 based devices  (Diecimila etc)             */
+/*   ATmega328P based devices (Duemilanove etc)           */
+/*                                                        */
+/* Alpha test                                             */
+/*   ATmega1280 based devices (Arduino Mega)              */
+/*                                                        */
+/* Work in progress:                                      */
+/*   ATmega644P based devices (Sanguino)                  */
+/*   ATtiny84 based devices (Luminet)                     */
+/*                                                        */
+/* Does not support:                                      */
+/*   USB based devices (eg. Teensy)                       */
+/*                                                        */
+/* Assumptions:                                           */
+/*   The code makes several assumptions that reduce the   */
+/*   code size. They are all true after a hardware reset, */
+/*   but may not be true if the bootloader is called by   */
+/*   other means or on other hardware.                    */
+/*     No interrupts can occur                            */
+/*     UART and Timer 1 are set to their reset state      */
+/*     SP points to RAMEND                                */
+/*                                                        */
+/* Code builds on code, libraries and optimisations from: */
+/*   stk500boot.c          by Jason P. Kyle               */
+/*   Arduino bootloader    http://arduino.cc              */
+/*   Spiff's 1K bootloader http://spiffie.org/know/arduino_1k_bootloader/bootloader.shtml */
+/*   avr-libc project      http://nongnu.org/avr-libc     */
+/*   Adaboot               http://www.ladyada.net/library/arduino/bootloader.html */
+/*   AVR305                Atmel Application Note         */
+/*                                                        */
+/* This program is free software; you can redistribute it */
+/* and/or modify it under the terms of the GNU General    */
+/* Public License as published by the Free Software       */
+/* Foundation; either version 2 of the License, or        */
+/* (at your option) any later version.                    */
+/*                                                        */
+/* This program is distributed in the hope that it will   */
+/* be useful, but WITHOUT ANY WARRANTY; without even the  */
+/* implied warranty of MERCHANTABILITY or FITNESS FOR A   */
+/* PARTICULAR PURPOSE.  See the GNU General Public        */
+/* License for more details.                              */
+/*                                                        */
+/* You should have received a copy of the GNU General     */
+/* Public License along with this program; if not, write  */
+/* to the Free Software Foundation, Inc.,                 */
+/* 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA */
+/*                                                        */
+/* Licence can be viewed at                               */
+/* http://www.fsf.org/licenses/gpl.txt                    */
+/*                                                        */
+/**********************************************************/
+
+
+/**********************************************************/
+/*                                                        */
+/* Optional defines:                                      */
+/*                                                        */
+/**********************************************************/
+/*                                                        */
+/* BIG_BOOT:                                              */
+/* Build a 1k bootloader, not 512 bytes. This turns on    */
+/* extra functionality.                                   */
+/*                                                        */
+/* BAUD_RATE:                                             */
+/* Set bootloader baud rate.                              */
+/*                                                        */
+/* LUDICROUS_SPEED:                                       */
+/* 230400 baud :-)                                        */
+/*                                                        */
+/* SOFT_UART:                                             */
+/* Use AVR305 soft-UART instead of hardware UART.         */
+/*                                                        */
+/* LED_START_FLASHES:                                     */
+/* Number of LED flashes on bootup.                       */
+/*                                                        */
+/* LED_DATA_FLASH:                                        */
+/* Flash LED when transferring data. For boards without   */
+/* TX or RX LEDs, or for people who like blinky lights.   */
+/*                                                        */
+/* SUPPORT_EEPROM:                                        */
+/* Support reading and writing from EEPROM. This is not   */
+/* used by Arduino, so off by default.                    */
+/*                                                        */
+/* TIMEOUT_MS:                                            */
+/* Bootloader timeout period, in milliseconds.            */
+/* 500,1000,2000,4000,8000 supported.                     */
+/*                                                        */
+/**********************************************************/
+
+/**********************************************************/
+/* Version Numbers!                                       */
+/*                                                        */
+/* Arduino Optiboot now includes this Version number in   */
+/* the source and object code.                            */
+/*                                                        */
+/* Version 3 was released as zip from the optiboot        */
+/*  repository and was distributed with Arduino 0022.     */
+/* Version 4 starts with the arduino repository commit    */
+/*  that brought the arduino repository up-to-date with   */
+/* the optiboot source tree changes since v3.             */
+/*                                                        */
+/**********************************************************/
+
+/**********************************************************/
+/* Edit History:                                          */
+/*                                                        */
+/* Jan 2012:                                              */
+/* 4.5 WestfW: fix NRWW value for m1284.                  */
+/* 4.4 WestfW: use attribute OS_main instead of naked for */
+/*             main().  This allows optimizations that we */
+/*             count on, which are prohibited in naked    */
+/*             functions due to PR42240.  (keeps us less  */
+/*             than 512 bytes when compiler is gcc4.5     */
+/*             (code from 4.3.2 remains the same.)        */
+/* 4.4 WestfW and Maniacbug:  Add m1284 support.  This    */
+/*             does not change the 328 binary, so the     */
+/*             version number didn't change either. (?)   */
+/* June 2011:                                             */
+/* 4.4 WestfW: remove automatic soft_uart detect (didn't  */
+/*             know what it was doing or why.)  Added a   */
+/*             check of the calculated BRG value instead. */
+/*             Version stays 4.4; existing binaries are   */
+/*             not changed.                               */
+/* 4.4 WestfW: add initialization of address to keep      */
+/*             the compiler happy.  Change SC'ed targets. */
+/*             Return the SW version via READ PARAM       */
+/* 4.3 WestfW: catch framing errors in getch(), so that   */
+/*             AVRISP works without HW kludges.           */
+/*  http://code.google.com/p/arduino/issues/detail?id=368n*/
+/* 4.2 WestfW: reduce code size, fix timeouts, change     */
+/*             verifySpace to use WDT instead of appstart */
+/* 4.1 WestfW: put version number in binary.              */
+/**********************************************************/
+
+#define OPTIBOOT_MAJVER 4
+#define OPTIBOOT_MINVER 5
+
+#define MAKESTR(a) #a
+#define MAKEVER(a, b) MAKESTR(a*256+b)
+
+asm("  .section .version\n"
+    "optiboot_version:  .word " MAKEVER(OPTIBOOT_MAJVER, OPTIBOOT_MINVER) "\n"
+    "  .section .text\n");
+
+#include <inttypes.h>
+#include <avr/io.h>
+#include <avr/pgmspace.h>
+
+// <avr/boot.h> uses sts instructions, but this version uses out instructions
+// This saves cycles and program memory.
+#include "boot.h"
+
+
+// We don't use <avr/wdt.h> as those routines have interrupt overhead we don't need.
+
+#include "pin_defs.h"
+#include "stk500.h"
+
+#ifndef LED_START_FLASHES
+#define LED_START_FLASHES 0
+#endif
+
+#ifdef LUDICROUS_SPEED
+#define BAUD_RATE 230400L
+#endif
+
+/* set the UART baud rate defaults */
+#ifndef BAUD_RATE
+#if F_CPU >= 8000000L
+#define BAUD_RATE   115200L // Highest rate Avrdude win32 will support
+#elsif F_CPU >= 1000000L
+#define BAUD_RATE   9600L   // 19200 also supported, but with significant error
+#elsif F_CPU >= 128000L
+#define BAUD_RATE   4800L   // Good for 128kHz internal RC
+#else
+#define BAUD_RATE 1200L     // Good even at 32768Hz
+#endif
+#endif
+
+#if 0
+/* Switch in soft UART for hard baud rates */
+/*
+ * I don't understand what this was supposed to accomplish, where the
+ * constant "280" came from, or why automatically (and perhaps unexpectedly)
+ * switching to a soft uart is a good thing, so I'm undoing this in favor
+ * of a range check using the same calc used to config the BRG...
+ */
+#if (F_CPU/BAUD_RATE) > 280 // > 57600 for 16MHz
+#ifndef SOFT_UART
+#define SOFT_UART
+#endif
+#endif
+#else // 0
+#if (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 > 250
+#error Unachievable baud rate (too slow) BAUD_RATE 
+#endif // baud rate slow check
+#if (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 < 3
+#error Unachievable baud rate (too fast) BAUD_RATE 
+#endif // baud rate fastn check
+#endif
+
+/* Watchdog settings */
+#define WATCHDOG_OFF    (0)
+#define WATCHDOG_16MS   (_BV(WDE))
+#define WATCHDOG_32MS   (_BV(WDP0) | _BV(WDE))
+#define WATCHDOG_64MS   (_BV(WDP1) | _BV(WDE))
+#define WATCHDOG_125MS  (_BV(WDP1) | _BV(WDP0) | _BV(WDE))
+#define WATCHDOG_250MS  (_BV(WDP2) | _BV(WDE))
+#define WATCHDOG_500MS  (_BV(WDP2) | _BV(WDP0) | _BV(WDE))
+#define WATCHDOG_1S     (_BV(WDP2) | _BV(WDP1) | _BV(WDE))
+#define WATCHDOG_2S     (_BV(WDP2) | _BV(WDP1) | _BV(WDP0) | _BV(WDE))
+#ifndef __AVR_ATmega8__
+#define WATCHDOG_4S     (_BV(WDP3) | _BV(WDE))
+#define WATCHDOG_8S     (_BV(WDP3) | _BV(WDP0) | _BV(WDE))
+#endif
+
+/* Function Prototypes */
+/* The main function is in init9, which removes the interrupt vector table */
+/* we don't need. It is also 'naked', which means the compiler does not    */
+/* generate any entry or exit code itself. */
+int main(void) __attribute__ ((OS_main)) __attribute__ ((section (".init9")));
+void putch(char);
+uint8_t getch(void);
+static inline void getNch(uint8_t); /* "static inline" is a compiler hint to reduce code size */
+void verifySpace();
+static inline void flash_led(uint8_t);
+uint8_t getLen();
+static inline void watchdogReset();
+void watchdogConfig(uint8_t x);
+#ifdef SOFT_UART
+void uartDelay() __attribute__ ((naked));
+#endif
+void appStart() __attribute__ ((naked));
+
+/*
+ * NRWW memory
+ * Addresses below NRWW (Non-Read-While-Write) can be programmed while
+ * continuing to run code from flash, slightly speeding up programming
+ * time.  Beware that Atmel data sheets specify this as a WORD address,
+ * while optiboot will be comparing against a 16-bit byte address.  This
+ * means that on a part with 128kB of memory, the upper part of the lower
+ * 64k will get NRWW processing as well, even though it doesn't need it.
+ * That's OK.  In fact, you can disable the overlapping processing for
+ * a part entirely by setting NRWWSTART to zero.  This reduces code
+ * space a bit, at the expense of being slightly slower, overall.
+ *
+ * RAMSTART should be self-explanatory.  It's bigger on parts with a
+ * lot of peripheral registers.
+ */
+#if defined(__AVR_ATmega168__)
+#define RAMSTART (0x100)
+#define NRWWSTART (0x3800)
+#elif defined(__AVR_ATmega328P__)
+#define RAMSTART (0x100)
+#define NRWWSTART (0x7000)
+#elif defined (__AVR_ATmega644P__)
+#define RAMSTART (0x100)
+#define NRWWSTART (0xE000)
+#elif defined (__AVR_ATmega1284P__)
+#define RAMSTART (0x100)
+#define NRWWSTART (0xE000)
+#elif defined(__AVR_ATtiny84__)
+#define RAMSTART (0x100)
+#define NRWWSTART (0x0000)
+#elif defined(__AVR_ATmega1280__)
+#define RAMSTART (0x200)
+#define NRWWSTART (0xE000)
+#elif defined(__AVR_ATmega8__) || defined(__AVR_ATmega88__)
+#define RAMSTART (0x100)
+#define NRWWSTART (0x1800)
+#endif
+
+/* C zero initialises all global variables. However, that requires */
+/* These definitions are NOT zero initialised, but that doesn't matter */
+/* This allows us to drop the zero init code, saving us memory */
+#define buff    ((uint8_t*)(RAMSTART))
+#ifdef VIRTUAL_BOOT_PARTITION
+#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4))
+#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6))
+#endif
+
+/* main program starts here */
+int main(void) {
+  uint8_t ch;
+
+  /*
+   * Making these local and in registers prevents the need for initializing
+   * them, and also saves space because code no longer stores to memory.
+   * (initializing address keeps the compiler happy, but isn't really
+   *  necessary, and uses 4 bytes of flash.)
+   */
+  register uint16_t address = 0;
+  register uint8_t  length;
+
+  // After the zero init loop, this is the first code to run.
+  //
+  // This code makes the following assumptions:
+  //  No interrupts will execute
+  //  SP points to RAMEND
+  //  r1 contains zero
+  //
+  // If not, uncomment the following instructions:
+  // cli();
+  asm volatile ("clr __zero_reg__");
+#ifdef __AVR_ATmega8__
+  SP=RAMEND;  // This is done by hardware reset
+#endif
+
+  // Adaboot no-wait mod
+  ch = MCUSR;
+  MCUSR = 0;
+  if (!(ch & _BV(EXTRF))) appStart();
+
+#if LED_START_FLASHES > 0
+  // Set up Timer 1 for timeout counter
+  TCCR1B = _BV(CS12) | _BV(CS10); // div 1024
+#endif
+#ifndef SOFT_UART
+#ifdef __AVR_ATmega8__
+  UCSRA = _BV(U2X); //Double speed mode USART
+  UCSRB = _BV(RXEN) | _BV(TXEN);  // enable Rx & Tx
+  UCSRC = _BV(URSEL) | _BV(UCSZ1) | _BV(UCSZ0);  // config USART; 8N1
+  UBRRL = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
+#else
+  UCSR0A = _BV(U2X0); //Double speed mode USART0
+  UCSR0B = _BV(RXEN0) | _BV(TXEN0);
+  UCSR0C = _BV(UCSZ00) | _BV(UCSZ01);
+  UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
+#endif
+#endif
+
+  // Set up watchdog to trigger after 500ms
+  watchdogConfig(WATCHDOG_1S);
+
+  /* Set LED pin as output */
+  LED_DDR |= _BV(LED);
+
+#ifdef SOFT_UART
+  /* Set TX pin as output */
+  UART_DDR |= _BV(UART_TX_BIT);
+#endif
+
+#if LED_START_FLASHES > 0
+  /* Flash onboard LED to signal entering of bootloader */
+  flash_led(LED_START_FLASHES * 2);
+#endif
+
+  /* Forever loop */
+  for (;;) {
+    /* get character from UART */
+    ch = getch();
+
+    if(ch == STK_GET_PARAMETER) {
+      unsigned char which = getch();
+      verifySpace();
+      if (which == 0x82) {
+        /*
+         * Send optiboot version as "minor SW version"
+         */
+        putch(OPTIBOOT_MINVER);
+      } else if (which == 0x81) {
+          putch(OPTIBOOT_MAJVER);
+      } else {
+        /*
+         * GET PARAMETER returns a generic 0x03 reply for
+         * other parameters - enough to keep Avrdude happy
+         */
+        putch(0x03);
+      }
+    }
+    else if(ch == STK_SET_DEVICE) {
+      // SET DEVICE is ignored
+      getNch(20);
+    }
+    else if(ch == STK_SET_DEVICE_EXT) {
+      // SET DEVICE EXT is ignored
+      getNch(5);
+    }
+    else if(ch == STK_LOAD_ADDRESS) {
+      // LOAD ADDRESS
+      uint16_t newAddress;
+      newAddress = getch();
+      newAddress = (newAddress & 0xff) | (getch() << 8);
+#ifdef RAMPZ
+      // Transfer top bit to RAMPZ
+      RAMPZ = (newAddress & 0x8000) ? 1 : 0;
+#endif
+      newAddress += newAddress; // Convert from word address to byte address
+      address = newAddress;
+      verifySpace();
+    }
+    else if(ch == STK_UNIVERSAL) {
+      // UNIVERSAL command is ignored
+      getNch(4);
+      putch(0x00);
+    }
+    /* Write memory, length is big endian and is in bytes */
+    else if(ch == STK_PROG_PAGE) {
+      // PROGRAM PAGE - we support flash programming only, not EEPROM
+      uint8_t *bufPtr;
+      uint16_t addrPtr;
+
+      getch();                  /* getlen() */
+      length = getch();
+      getch();
+
+      // If we are in RWW section, immediately start page erase
+      if (address < NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
+
+      // While that is going on, read in page contents
+      bufPtr = buff;
+      do *bufPtr++ = getch();
+      while (--length);
+
+      // If we are in NRWW section, page erase has to be delayed until now.
+      // Todo: Take RAMPZ into account
+      if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
+
+      // Read command terminator, start reply
+      verifySpace();
+
+      // If only a partial page is to be programmed, the erase might not be complete.
+      // So check that here
+      boot_spm_busy_wait();
+
+#ifdef VIRTUAL_BOOT_PARTITION
+      if ((uint16_t)(void*)address == 0) {
+        // This is the reset vector page. We need to live-patch the code so the
+        // bootloader runs.
+        //
+        // Move RESET vector to WDT vector
+        uint16_t vect = buff[0] | (buff[1]<<8);
+        rstVect = vect;
+        wdtVect = buff[8] | (buff[9]<<8);
+        vect -= 4; // Instruction is a relative jump (rjmp), so recalculate.
+        buff[8] = vect & 0xff;
+        buff[9] = vect >> 8;
+
+        // Add jump to bootloader at RESET vector
+        buff[0] = 0x7f;
+        buff[1] = 0xce; // rjmp 0x1d00 instruction
+      }
+#endif
+
+      // Copy buffer into programming buffer
+      bufPtr = buff;
+      addrPtr = (uint16_t)(void*)address;
+      ch = SPM_PAGESIZE / 2;
+      do {
+        uint16_t a;
+        a = *bufPtr++;
+        a |= (*bufPtr++) << 8;
+        __boot_page_fill_short((uint16_t)(void*)addrPtr,a);
+        addrPtr += 2;
+      } while (--ch);
+
+      // Write from programming buffer
+      __boot_page_write_short((uint16_t)(void*)address);
+      boot_spm_busy_wait();
+
+#if defined(RWWSRE)
+      // Reenable read access to flash
+      boot_rww_enable();
+#endif
+
+    }
+    /* Read memory block mode, length is big endian.  */
+    else if(ch == STK_READ_PAGE) {
+      // READ PAGE - we only read flash
+      getch();                  /* getlen() */
+      length = getch();
+      getch();
+
+      verifySpace();
+#ifdef VIRTUAL_BOOT_PARTITION
+      do {
+        // Undo vector patch in bottom page so verify passes
+        if (address == 0)       ch=rstVect & 0xff;
+        else if (address == 1)  ch=rstVect >> 8;
+        else if (address == 8)  ch=wdtVect & 0xff;
+        else if (address == 9) ch=wdtVect >> 8;
+        else ch = pgm_read_byte_near(address);
+        address++;
+        putch(ch);
+      } while (--length);
+#else
+#ifdef RAMPZ
+// Since RAMPZ should already be set, we need to use EPLM directly.
+//      do putch(pgm_read_byte_near(address++));
+//      while (--length);
+      do {
+        uint8_t result;
+        __asm__ ("elpm %0,Z\n":"=r"(result):"z"(address));
+        putch(result);
+        address++;
+      }
+      while (--length);
+#else
+      do putch(pgm_read_byte_near(address++));
+      while (--length);
+#endif
+#endif
+    }
+
+    /* Get device signature bytes  */
+    else if(ch == STK_READ_SIGN) {
+      // READ SIGN - return what Avrdude wants to hear
+      verifySpace();
+      putch(SIGNATURE_0);
+      putch(SIGNATURE_1);
+      putch(SIGNATURE_2);
+    }
+    else if (ch == STK_LEAVE_PROGMODE) { /* 'Q' */
+      // Adaboot no-wait mod
+      watchdogConfig(WATCHDOG_16MS);
+      verifySpace();
+    }
+    else {
+      // This covers the response to commands like STK_ENTER_PROGMODE
+      verifySpace();
+    }
+    putch(STK_OK);
+  }
+}
+
+void putch(char ch) {
+#ifndef SOFT_UART
+  while (!(UCSR0A & _BV(UDRE0)));
+  UDR0 = ch;
+#else
+  __asm__ __volatile__ (
+    "   com %[ch]\n" // ones complement, carry set
+    "   sec\n"
+    "1: brcc 2f\n"
+    "   cbi %[uartPort],%[uartBit]\n"
+    "   rjmp 3f\n"
+    "2: sbi %[uartPort],%[uartBit]\n"
+    "   nop\n"
+    "3: rcall uartDelay\n"
+    "   rcall uartDelay\n"
+    "   lsr %[ch]\n"
+    "   dec %[bitcnt]\n"
+    "   brne 1b\n"
+    :
+    :
+      [bitcnt] "d" (10),
+      [ch] "r" (ch),
+      [uartPort] "I" (_SFR_IO_ADDR(UART_PORT)),
+      [uartBit] "I" (UART_TX_BIT)
+    :
+      "r25"
+  );
+#endif
+}
+
+uint8_t getch(void) {
+  uint8_t ch;
+
+#ifdef LED_DATA_FLASH
+#ifdef __AVR_ATmega8__
+  LED_PORT ^= _BV(LED);
+#else
+  LED_PIN |= _BV(LED);
+#endif
+#endif
+
+#ifdef SOFT_UART
+  __asm__ __volatile__ (
+    "1: sbic  %[uartPin],%[uartBit]\n"  // Wait for start edge
+    "   rjmp  1b\n"
+    "   rcall uartDelay\n"          // Get to middle of start bit
+    "2: rcall uartDelay\n"              // Wait 1 bit period
+    "   rcall uartDelay\n"              // Wait 1 bit period
+    "   clc\n"
+    "   sbic  %[uartPin],%[uartBit]\n"
+    "   sec\n"
+    "   dec   %[bitCnt]\n"
+    "   breq  3f\n"
+    "   ror   %[ch]\n"
+    "   rjmp  2b\n"
+    "3:\n"
+    :
+      [ch] "=r" (ch)
+    :
+      [bitCnt] "d" (9),
+      [uartPin] "I" (_SFR_IO_ADDR(UART_PIN)),
+      [uartBit] "I" (UART_RX_BIT)
+    :
+      "r25"
+);
+#else
+  while(!(UCSR0A & _BV(RXC0)))
+    ;
+  if (!(UCSR0A & _BV(FE0))) {
+      /*
+       * A Framing Error indicates (probably) that something is talking
+       * to us at the wrong bit rate.  Assume that this is because it
+       * expects to be talking to the application, and DON'T reset the
+       * watchdog.  This should cause the bootloader to abort and run
+       * the application "soon", if it keeps happening.  (Note that we
+       * don't care that an invalid char is returned...)
+       */
+    watchdogReset();
+  }
+  
+  ch = UDR0;
+#endif
+
+#ifdef LED_DATA_FLASH
+#ifdef __AVR_ATmega8__
+  LED_PORT ^= _BV(LED);
+#else
+  LED_PIN |= _BV(LED);
+#endif
+#endif
+
+  return ch;
+}
+
+#ifdef SOFT_UART
+// AVR305 equation: #define UART_B_VALUE (((F_CPU/BAUD_RATE)-23)/6)
+// Adding 3 to numerator simulates nearest rounding for more accurate baud rates
+#define UART_B_VALUE (((F_CPU/BAUD_RATE)-20)/6)
+#if UART_B_VALUE > 255
+#error Baud rate too slow for soft UART
+#endif
+
+void uartDelay() {
+  __asm__ __volatile__ (
+    "ldi r25,%[count]\n"
+    "1:dec r25\n"
+    "brne 1b\n"
+    "ret\n"
+    ::[count] "M" (UART_B_VALUE)
+  );
+}
+#endif
+
+void getNch(uint8_t count) {
+  do getch(); while (--count);
+  verifySpace();
+}
+
+void verifySpace() {
+  if (getch() != CRC_EOP) {
+    watchdogConfig(WATCHDOG_16MS);    // shorten WD timeout
+    while (1)                         // and busy-loop so that WD causes
+      ;                               //  a reset and app start.
+  }
+  putch(STK_INSYNC);
+}
+
+#if LED_START_FLASHES > 0
+void flash_led(uint8_t count) {
+  do {
+    TCNT1 = -(F_CPU/(1024*16));
+    TIFR1 = _BV(TOV1);
+    while(!(TIFR1 & _BV(TOV1)));
+#ifdef __AVR_ATmega8__
+    LED_PORT ^= _BV(LED);
+#else
+    LED_PIN |= _BV(LED);
+#endif
+    watchdogReset();
+  } while (--count);
+}
+#endif
+
+// Watchdog functions. These are only safe with interrupts turned off.
+void watchdogReset() {
+  __asm__ __volatile__ (
+    "wdr\n"
+  );
+}
+
+void watchdogConfig(uint8_t x) {
+  WDTCSR = _BV(WDCE) | _BV(WDE);
+  WDTCSR = x;
+}
+
+void appStart() {
+  watchdogConfig(WATCHDOG_OFF);
+  __asm__ __volatile__ (
+#ifdef VIRTUAL_BOOT_PARTITION
+    // Jump to WDT vector
+    "ldi r30,4\n"
+    "clr r31\n"
+#else
+    // Jump to RST vector
+    "clr r30\n"
+    "clr r31\n"
+#endif
+    "ijmp\n"
+  );
+}

ArduinoAddons/Arduino_0.xx/Sanguino/bootloaders/atmega1284p/optiboot_1284P_20MHz_57k6_baud.hex

@@ -0,0 +1,33 @@
+:020000021000EC
+:10FE00000F92CDB7DEB7112484B714BE81FFDFD0C7
+:10FE100082E08093C00088E18093C10086E08093F7
+:10FE2000C2008AE28093C4008EE0BBD0209A00E03A
+:10FE300010E0EE24E394E1E1DE2EF3E0FF2EA5D006
+:10FE4000813471F4A2D08983B2D08981823809F4D7
+:10FE50008BC0813811F484E001C083E08FD08BC067
+:10FE6000823411F484E103C0853419F485E0A7D00D
+:10FE700082C0853591F489D0A82EBB2486D0082F66
+:10FE800010E0102F00270A291B29812F881F88279F
+:10FE9000881F8BBF000F111F6DC0863521F484E0D1
+:10FEA0008ED080E0DBCF843609F040C06ED06DD0BC
+:10FEB000C82E6BD080EE0030180718F4F801F7BE9A
+:10FEC000E895A12C51E0B52E60D0F50181935F013A
+:10FED000CE16D1F7F0EE00301F0718F0F801F7BE8C
+:10FEE000E89565D007B600FCFDCFF801A0E0B1E0D1
+:10FEF0002C9130E011968C91119790E0982F8827E3
+:10FF0000822B932B12960C01E7BEE89511243296B2
+:10FF100082E0A030B80761F785E0F80187BFE89577
+:10FF200007B600FCFDCFD7BEE89525C08437A9F4FD
+:10FF30002CD02BD0B82E29D03AD0CB2C4801F401AC
+:10FF400086911CD00894811C911CCA94C1F70F5F44
+:10FF50001F4FBA940B0D111D0EC0853739F427D0F1
+:10FF60008EE10CD087E90AD085E078CF813511F495
+:10FF700088E017D01CD080E101D061CF9091C00003
+:10FF800095FFFCCF8093C60008958091C00087FF45
+:10FF9000FCCF8091C00084FD01C0A8958091C6006F
+:10FFA0000895E0E6F0E098E1908380830895EDDF26
+:10FFB000803219F088E0F5DFFFCF84E1DFCFCF9307
+:10FFC000C82FE3DFC150E9F7F2DFCF91089580E059
+:08FFD000E8DFEE27FF2709948A
+:040000031000FE00EB
+:00000001FF

ArduinoAddons/Arduino_0.xx/Sanguino/bootloaders/atmega1284p/pin_defs.h

@@ -0,0 +1,81 @@
+#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega88) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega88__)
+/* Onboard LED is connected to pin PB5 in Arduino NG, Diecimila, and Duemilanove */
+#define LED_DDR     DDRB
+#define LED_PORT    PORTB
+#define LED_PIN     PINB
+#define LED         PINB5
+
+/* Ports for soft UART */
+#ifdef SOFT_UART
+#define UART_PORT   PORTD
+#define UART_PIN    PIND
+#define UART_DDR    DDRD
+#define UART_TX_BIT 1
+#define UART_RX_BIT 0
+#endif
+#endif
+
+#if defined(__AVR_ATmega8__)
+  //Name conversion R.Wiersma
+  #define UCSR0A        UCSRA
+  #define UDR0          UDR
+  #define UDRE0         UDRE
+  #define RXC0          RXC
+  #define FE0           FE
+  #define TIFR1         TIFR
+  #define WDTCSR        WDTCR
+#endif
+
+/* Luminet support */
+#if defined(__AVR_ATtiny84__)
+/* Red LED is connected to pin PA4 */
+#define LED_DDR     DDRA
+#define LED_PORT    PORTA
+#define LED_PIN     PINA
+#define LED         PINA4
+/* Ports for soft UART - left port only for now. TX/RX on PA2/PA3 */
+#ifdef SOFT_UART
+#define UART_PORT   PORTA
+#define UART_PIN    PINA
+#define UART_DDR    DDRA
+#define UART_TX_BIT 2
+#define UART_RX_BIT 3
+#endif
+#endif
+
+/* Sanguino support */
+#if defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)
+/* Onboard LED is connected to pin PB0 on Sanguino */
+#define LED_DDR     DDRB
+#define LED_PORT    PORTB
+#define LED_PIN     PINB
+#define LED         PINB0
+
+/* Ports for soft UART */
+#ifdef SOFT_UART
+#define UART_PORT   PORTD
+#define UART_PIN    PIND
+#define UART_DDR    DDRD
+#define UART_TX_BIT 1
+#define UART_RX_BIT 0
+#endif
+#endif
+
+/* Mega support */
+#if defined(__AVR_ATmega1280__)
+/* Onboard LED is connected to pin PB7 on Arduino Mega */
+#define LED_DDR     DDRB
+#define LED_PORT    PORTB
+#define LED_PIN     PINB
+#define LED         PINB7
+
+/* Ports for soft UART */
+#ifdef SOFT_UART
+#define UART_PORT   PORTE
+#define UART_PIN    PINE
+#define UART_DDR    DDRE
+#define UART_TX_BIT 1
+#define UART_RX_BIT 0
+#endif
+#endif
+

ArduinoAddons/Arduino_0.xx/Sanguino/bootloaders/atmega1284p/stk500.h

@@ -0,0 +1,39 @@
+/* STK500 constants list, from AVRDUDE */
+#define STK_OK              0x10
+#define STK_FAILED          0x11  // Not used
+#define STK_UNKNOWN         0x12  // Not used
+#define STK_NODEVICE        0x13  // Not used
+#define STK_INSYNC          0x14  // ' '
+#define STK_NOSYNC          0x15  // Not used
+#define ADC_CHANNEL_ERROR   0x16  // Not used
+#define ADC_MEASURE_OK      0x17  // Not used
+#define PWM_CHANNEL_ERROR   0x18  // Not used
+#define PWM_ADJUST_OK       0x19  // Not used
+#define CRC_EOP             0x20  // 'SPACE'
+#define STK_GET_SYNC        0x30  // '0'
+#define STK_GET_SIGN_ON     0x31  // '1'
+#define STK_SET_PARAMETER   0x40  // '@'
+#define STK_GET_PARAMETER   0x41  // 'A'
+#define STK_SET_DEVICE      0x42  // 'B'
+#define STK_SET_DEVICE_EXT  0x45  // 'E'
+#define STK_ENTER_PROGMODE  0x50  // 'P'
+#define STK_LEAVE_PROGMODE  0x51  // 'Q'
+#define STK_CHIP_ERASE      0x52  // 'R'
+#define STK_CHECK_AUTOINC   0x53  // 'S'
+#define STK_LOAD_ADDRESS    0x55  // 'U'
+#define STK_UNIVERSAL       0x56  // 'V'
+#define STK_PROG_FLASH      0x60  // '`'
+#define STK_PROG_DATA       0x61  // 'a'
+#define STK_PROG_FUSE       0x62  // 'b'
+#define STK_PROG_LOCK       0x63  // 'c'
+#define STK_PROG_PAGE       0x64  // 'd'
+#define STK_PROG_FUSE_EXT   0x65  // 'e'
+#define STK_READ_FLASH      0x70  // 'p'
+#define STK_READ_DATA       0x71  // 'q'
+#define STK_READ_FUSE       0x72  // 'r'
+#define STK_READ_LOCK       0x73  // 's'
+#define STK_READ_PAGE       0x74  // 't'
+#define STK_READ_SIGN       0x75  // 'u'
+#define STK_READ_OSCCAL     0x76  // 'v'
+#define STK_READ_FUSE_EXT   0x77  // 'w'
+#define STK_READ_OSCCAL_EXT 0x78  // 'x'

ArduinoAddons/Arduino_0.xx/Sanguino/bootloaders/atmega644p/ATmegaBOOT.c

@@ -168,7 +168,7 @@ int main(void)
     WDTCSR = 0;
 
     // Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot.
-    if (! (ch &  _BV(EXTRF))) // if its a not an external reset...
+    if (! (ch &  _BV(EXTRF))) // if it's a not an external reset...
       app_start();  // skip bootloader
 #endif
 

ArduinoAddons/Arduino_0.xx/Sanguino/cores/arduino/Copy of wiring.h

@@ -1,135 +0,0 @@
-/*
-  wiring.h - Partial implementation of the Wiring API for the ATmega8.
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2005-2006 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id$
-*/
-
-#ifndef Wiring_h
-#define Wiring_h
-
-#include <avr/io.h>
-#include <stdlib.h>
-#include "binary.h"
-
-#ifdef __cplusplus
-extern "C"{
-#endif
-
-#define HIGH 0x1
-#define LOW  0x0
-
-#define INPUT 0x0
-#define OUTPUT 0x1
-
-#define true 0x1
-#define false 0x0
-
-#define PI 3.1415926535897932384626433832795
-#define HALF_PI 1.5707963267948966192313216916398
-#define TWO_PI 6.283185307179586476925286766559
-#define DEG_TO_RAD 0.017453292519943295769236907684886
-#define RAD_TO_DEG 57.295779513082320876798154814105
-
-#define SERIAL  0x0
-#define DISPLAY 0x1
-
-#define LSBFIRST 0
-#define MSBFIRST 1
-
-#define CHANGE 1
-#define FALLING 2
-#define RISING 3
-
-#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-#define INTERNAL1V1 2
-#define INTERNAL2V56 3
-#else
-#define INTERNAL 3
-#endif
-#define DEFAULT 1
-#define EXTERNAL 0
-
-// undefine stdlib's abs if encountered
-#ifdef abs
-#undef abs
-#endif
-
-#define min(a,b) ((a)<(b)?(a):(b))
-#define max(a,b) ((a)>(b)?(a):(b))
-#define abs(x) ((x)>0?(x):-(x))
-#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
-#define round(x)     ((x)>=0?(long)((x)+0.5):(long)((x)-0.5))
-#define radians(deg) ((deg)*DEG_TO_RAD)
-#define degrees(rad) ((rad)*RAD_TO_DEG)
-#define sq(x) ((x)*(x))
-
-#define interrupts() sei()
-#define noInterrupts() cli()
-
-#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L )
-#define clockCyclesToMicroseconds(a) ( ((a) * 1000L) / (F_CPU / 1000L) )
-#define microsecondsToClockCycles(a) ( ((a) * (F_CPU / 1000L)) / 1000L )
-
-#define lowByte(w) ((uint8_t) ((w) & 0xff))
-#define highByte(w) ((uint8_t) ((w) >> 8))
-
-#define bitRead(value, bit) (((value) >> (bit)) & 0x01)
-#define bitSet(value, bit) ((value) |= (1UL << (bit)))
-#define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
-#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit))
-
-
-typedef unsigned int word;
-
-#define bit(b) (1UL << (b))
-
-typedef uint8_t boolean;
-typedef uint8_t byte;
-
-void init(void);
-
-void pinMode(uint8_t, uint8_t);
-void digitalWrite(uint8_t, uint8_t);
-int digitalRead(uint8_t);
-int analogRead(uint8_t);
-void analogReference(uint8_t mode);
-void analogWrite(uint8_t, int);
-
-unsigned long millis(void);
-unsigned long micros(void);
-void delay(unsigned long);
-void delayMicroseconds(unsigned int us);
-unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout);
-
-void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val);
-uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder);
-
-void attachInterrupt(uint8_t, void (*)(void), int mode);
-void detachInterrupt(uint8_t);
-
-void setup(void);
-void loop(void);
-
-#ifdef __cplusplus
-} // extern "C"
-#endif
-
-#endif

ArduinoAddons/Arduino_0.xx/Sanguino/cores/arduino/HardwareSerial.cpp

@@ -37,7 +37,11 @@
 // using a ring buffer (I think), in which rx_buffer_head is the index of the
 // location to which to write the next incoming character and rx_buffer_tail
 // is the index of the location from which to read.
+#if (RAMEND < 1000)
+  #define RX_BUFFER_SIZE 32
+#else
   #define RX_BUFFER_SIZE 128
+#endif
 
 struct ring_buffer
 {
@@ -46,11 +50,22 @@ struct ring_buffer
   int tail;
 };
 
+#if defined(UBRRH) || defined(UBRR0H)
   ring_buffer rx_buffer  =  { { 0 }, 0, 0 };
+#endif
+#if defined(UBRR1H)
+  ring_buffer rx_buffer1  =  { { 0 }, 0, 0 };
+#endif
+#if defined(UBRR2H)
+  ring_buffer rx_buffer2  =  { { 0 }, 0, 0 };
+#endif
+#if defined(UBRR3H)
+  ring_buffer rx_buffer3  =  { { 0 }, 0, 0 };
+#endif
 
 inline void store_char(unsigned char c, ring_buffer *rx_buffer)
 {
-  int i = (unsigned int)(rx_buffer->head + 1) & (RX_BUFFER_SIZE -1);
+  int i = (unsigned int)(rx_buffer->head + 1) % RX_BUFFER_SIZE;
 
   // if we should be storing the received character into the location
   // just before the tail (meaning that the head would advance to the
@@ -62,13 +77,95 @@ inline void store_char(unsigned char c, ring_buffer *rx_buffer)
   }
 }
 
+#if defined(USART_RX_vect)
+  SIGNAL(USART_RX_vect)
+  {
+  #if defined(UDR0)
+    unsigned char c  =  UDR0;
+  #elif defined(UDR)
+    unsigned char c  =  UDR;  //  atmega8535
+  #else
+    #error UDR not defined
+  #endif
+    store_char(c, &rx_buffer);
+  }
+#elif defined(SIG_USART0_RECV) && defined(UDR0)
+  SIGNAL(SIG_USART0_RECV)
+  {
+    unsigned char c  =  UDR0;
+    store_char(c, &rx_buffer);
+  }
+#elif defined(SIG_UART0_RECV) && defined(UDR0)
+  SIGNAL(SIG_UART0_RECV)
+  {
+    unsigned char c  =  UDR0;
+    store_char(c, &rx_buffer);
+  }
+//#elif defined(SIG_USART_RECV)
+#elif defined(USART0_RX_vect)
   // fixed by Mark Sproul this is on the 644/644p
   //SIGNAL(SIG_USART_RECV)
   SIGNAL(USART0_RX_vect)
   {
+  #if defined(UDR0)
     unsigned char c  =  UDR0;
+  #elif defined(UDR)
+    unsigned char c  =  UDR;  //  atmega8, atmega32
+  #else
+    #error UDR not defined
+  #endif
     store_char(c, &rx_buffer);
   }
+#elif defined(SIG_UART_RECV)
+  // this is for atmega8
+  SIGNAL(SIG_UART_RECV)
+  {
+  #if defined(UDR0)
+    unsigned char c  =  UDR0;  //  atmega645
+  #elif defined(UDR)
+    unsigned char c  =  UDR;  //  atmega8
+  #endif
+    store_char(c, &rx_buffer);
+  }
+#elif defined(USBCON)
+  #warning No interrupt handler for usart 0
+  #warning Serial(0) is on USB interface
+#else
+  #error No interrupt handler for usart 0
+#endif
+
+//#if defined(SIG_USART1_RECV)
+#if defined(USART1_RX_vect)
+  //SIGNAL(SIG_USART1_RECV)
+  SIGNAL(USART1_RX_vect)
+  {
+    unsigned char c = UDR1;
+    store_char(c, &rx_buffer1);
+  }
+#elif defined(SIG_USART1_RECV)
+  #error SIG_USART1_RECV
+#endif
+
+#if defined(USART2_RX_vect) && defined(UDR2)
+  SIGNAL(USART2_RX_vect)
+  {
+    unsigned char c = UDR2;
+    store_char(c, &rx_buffer2);
+  }
+#elif defined(SIG_USART2_RECV)
+  #error SIG_USART2_RECV
+#endif
+
+#if defined(USART3_RX_vect) && defined(UDR3)
+  SIGNAL(USART3_RX_vect)
+  {
+    unsigned char c = UDR3;
+    store_char(c, &rx_buffer3);
+  }
+#elif defined(SIG_USART3_RECV)
+  #error SIG_USART3_RECV
+#endif
+
 
 
 // Constructors ////////////////////////////////////////////////////////////////
@@ -134,7 +231,7 @@ void HardwareSerial::end()
 
 int HardwareSerial::available(void)
 {
-  return (unsigned int)(RX_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) & (RX_BUFFER_SIZE-1);
+  return (unsigned int)(RX_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % RX_BUFFER_SIZE;
 }
 
 int HardwareSerial::peek(void)
@@ -153,7 +250,7 @@ int HardwareSerial::read(void)
     return -1;
   } else {
     unsigned char c = _rx_buffer->buffer[_rx_buffer->tail];
-    _rx_buffer->tail = (unsigned int)(_rx_buffer->tail + 1) & (RX_BUFFER_SIZE-1);
+    _rx_buffer->tail = (unsigned int)(_rx_buffer->tail + 1) % RX_BUFFER_SIZE;
     return c;
   }
 }
@@ -181,7 +278,26 @@ void HardwareSerial::write(uint8_t c)
 }
 
 // Preinstantiate Objects //////////////////////////////////////////////////////
+
+#if defined(UBRRH) && defined(UBRRL)
+  HardwareSerial Serial(&rx_buffer, &UBRRH, &UBRRL, &UCSRA, &UCSRB, &UDR, RXEN, TXEN, RXCIE, UDRE, U2X);
+#elif defined(UBRR0H) && defined(UBRR0L)
   HardwareSerial Serial(&rx_buffer, &UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UDR0, RXEN0, TXEN0, RXCIE0, UDRE0, U2X0);
+#elif defined(USBCON)
+  #warning no serial port defined  (port 0)
+#else
+  #error no serial port defined  (port 0)
+#endif
+
+#if defined(UBRR1H)
+  HardwareSerial Serial1(&rx_buffer1, &UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UDR1, RXEN1, TXEN1, RXCIE1, UDRE1, U2X1);
+#endif
+#if defined(UBRR2H)
+  HardwareSerial Serial2(&rx_buffer2, &UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UDR2, RXEN2, TXEN2, RXCIE2, UDRE2, U2X2);
+#endif
+#if defined(UBRR3H)
+  HardwareSerial Serial3(&rx_buffer3, &UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UDR3, RXEN3, TXEN3, RXCIE3, UDRE3, U2X3);
+#endif
 
 #endif // whole file
 

ArduinoAddons/Arduino_0.xx/Sanguino/cores/arduino/WInterrupts.c

@@ -46,7 +46,6 @@ void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) {
     // the mode into place.
       
     // Enable the interrupt.
-      
     switch (interruptNum) {
 #if defined(EICRA) && defined(EICRB) && defined(EIMSK)
     case 2:
@@ -81,6 +80,19 @@ void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) {
       EICRB = (EICRB & ~((1 << ISC70) | (1 << ISC71))) | (mode << ISC70);
       EIMSK |= (1 << INT7);
       break;
+#elif defined(EICRA) && defined(EIMSK)
+    case 0:
+      EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+      EIMSK |= (1 << INT0);
+      break;
+    case 1:
+      EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+      EIMSK |= (1 << INT1);
+      break;
+    case 2:
+      EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
+      EIMSK |= (1 << INT2);
+      break;
 #else
     case 0:
     #if defined(EICRA) && defined(ISC00) && defined(EIMSK)
@@ -123,15 +135,6 @@ void detachInterrupt(uint8_t interruptNum) {
     // ATmega8.  There, INT0 is 6 and INT1 is 7.)
     switch (interruptNum) {
 #if defined(EICRA) && defined(EICRB) && defined(EIMSK)
-    case 2:
-      EIMSK &= ~(1 << INT0);
-      break;
-    case 3:
-      EIMSK &= ~(1 << INT1);
-      break;
-    case 4:
-      EIMSK &= ~(1 << INT2);
-      break;
     case 5:
       EIMSK &= ~(1 << INT3);
       break;
@@ -147,6 +150,17 @@ void detachInterrupt(uint8_t interruptNum) {
     case 7:
       EIMSK &= ~(1 << INT7);
       break;
+#elif defined(EICRA) && defined(EIMSK)
+    case 0:
+      EIMSK &= ~(1 << INT0);
+      break;
+    case 1:
+      EIMSK &= ~(1 << INT1);
+      break;
+    case 2:
+      EIMSK &= ~(1 << INT2);
+      break;
+
 #else
     case 0:
     #if defined(EIMSK) && defined(INT0)
@@ -184,8 +198,8 @@ void attachInterruptTwi(void (*userFunc)(void) ) {
 }
 */
 
-#if defined(EICRA) && defined(EICRB)
 
+#if defined(EICRA) && defined(EICRB)
 SIGNAL(INT0_vect) {
   if(intFunc[EXTERNAL_INT_2])
     intFunc[EXTERNAL_INT_2]();
@@ -226,6 +240,23 @@ SIGNAL(INT7_vect) {
     intFunc[EXTERNAL_INT_7]();
 }
 
+#elif defined(EICRA)
+
+SIGNAL(INT0_vect) {
+  if(intFunc[EXTERNAL_INT_0])
+    intFunc[EXTERNAL_INT_0]();
+}
+
+SIGNAL(INT1_vect) {
+  if(intFunc[EXTERNAL_INT_1])
+    intFunc[EXTERNAL_INT_1]();
+}
+
+SIGNAL(INT2_vect) {
+  if(intFunc[EXTERNAL_INT_2])
+    intFunc[EXTERNAL_INT_2]();
+}
+
 #else
 
 SIGNAL(INT0_vect) {

ArduinoAddons/Arduino_0.xx/Sanguino/cores/arduino/pins_arduino.c

@@ -19,17 +19,54 @@
   Free Software Foundation, Inc., 59 Temple Place, Suite 330,
   Boston, MA  02111-1307  USA
 
-  $Id: pins_arduino.c 254 2007-04-20 23:17:38Z mellis $
+  Changelog
+  -----------
+  11/25/11  - ryan@ryanmsutton.com - Add pins for Sanguino 644P and 1284P
+  $Id$
 */
 
 #include <avr/io.h>
 #include "wiring_private.h"
 #include "pins_arduino.h"
 
-// On the Sanguino board, digital pins are also used
+// On the Arduino board, digital pins are also used
 // for the analog output (software PWM).  Analog input
 // pins are a separate set.
 
+// ATMEL ATMEGA8 & 168 / ARDUINO
+//
+//                  +-\/-+
+//            PC6  1|    |28  PC5 (AI 5)
+//      (D 0) PD0  2|    |27  PC4 (AI 4)
+//      (D 1) PD1  3|    |26  PC3 (AI 3)
+//      (D 2) PD2  4|    |25  PC2 (AI 2)
+// PWM+ (D 3) PD3  5|    |24  PC1 (AI 1)
+//      (D 4) PD4  6|    |23  PC0 (AI 0)
+//            VCC  7|    |22  GND
+//            GND  8|    |21  AREF
+//            PB6  9|    |20  AVCC
+//            PB7 10|    |19  PB5 (D 13)
+// PWM+ (D 5) PD5 11|    |18  PB4 (D 12)
+// PWM+ (D 6) PD6 12|    |17  PB3 (D 11) PWM
+//      (D 7) PD7 13|    |16  PB2 (D 10) PWM
+//      (D 8) PB0 14|    |15  PB1 (D 9) PWM
+//                  +----+
+//
+// (PWM+ indicates the additional PWM pins on the ATmega168.)
+
+// ATMEL ATMEGA1280 / ARDUINO
+//
+// 0-7 PE0-PE7   works
+// 8-13 PB0-PB5  works
+// 14-21 PA0-PA7 works 
+// 22-29 PH0-PH7 works
+// 30-35 PG5-PG0 works
+// 36-43 PC7-PC0 works
+// 44-51 PJ7-PJ0 works
+// 52-59 PL7-PL0 works
+// 60-67 PD7-PD0 works
+// A0-A7 PF0-PF7
+// A8-A15 PK0-PK7
 // ATMEL ATMEGA644P / SANGUINO
 //
 //                   +---\/---+
@@ -55,42 +92,321 @@
 //  PWM (D 14) PD6 20|        |21  PD7 (D 15) PWM
 //                   +--------+
 //
-
 #define PA 1
 #define PB 2
 #define PC 3
 #define PD 4
+#define PE 5
+#define PF 6
+#define PG 7
+#define PH 8
+#define PJ 10
+#define PK 11
+#define PL 12
+
+
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+const uint16_t PROGMEM port_to_mode_PGM[] = {
+	NOT_A_PORT,
+	&DDRA,
+	&DDRB,
+	&DDRC,
+	&DDRD,
+	&DDRE,
+	&DDRF,
+	&DDRG,
+	&DDRH,
+	NOT_A_PORT,
+	&DDRJ,
+	&DDRK,
+	&DDRL,
+};
+
+const uint16_t PROGMEM port_to_output_PGM[] = {
+	NOT_A_PORT,
+	&PORTA,
+	&PORTB,
+	&PORTC,
+	&PORTD,
+	&PORTE,
+	&PORTF,
+	&PORTG,
+	&PORTH,
+	NOT_A_PORT,
+	&PORTJ,
+	&PORTK,
+	&PORTL,
+};
+
+const uint16_t PROGMEM port_to_input_PGM[] = {
+	NOT_A_PIN,
+	&PINA,
+	&PINB,
+	&PINC,
+	&PIND,
+	&PINE,
+	&PINF,
+	&PING,
+	&PINH,
+	NOT_A_PIN,
+	&PINJ,
+	&PINK,
+	&PINL,
+};
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+	// PORTLIST		
+	// -------------------------------------------		
+	PE	, // PE 0 ** 0 ** USART0_RX	
+	PE	, // PE 1 ** 1 ** USART0_TX	
+	PE	, // PE 4 ** 2 ** PWM2	
+	PE	, // PE 5 ** 3 ** PWM3	
+	PG	, // PG 5 ** 4 ** PWM4	
+	PE	, // PE 3 ** 5 ** PWM5	
+	PH	, // PH 3 ** 6 ** PWM6	
+	PH	, // PH 4 ** 7 ** PWM7	
+	PH	, // PH 5 ** 8 ** PWM8	
+	PH	, // PH 6 ** 9 ** PWM9	
+	PB	, // PB 4 ** 10 ** PWM10	
+	PB	, // PB 5 ** 11 ** PWM11	
+	PB	, // PB 6 ** 12 ** PWM12	
+	PB	, // PB 7 ** 13 ** PWM13	
+	PJ	, // PJ 1 ** 14 ** USART3_TX	
+	PJ	, // PJ 0 ** 15 ** USART3_RX	
+	PH	, // PH 1 ** 16 ** USART2_TX	
+	PH	, // PH 0 ** 17 ** USART2_RX	
+	PD	, // PD 3 ** 18 ** USART1_TX	
+	PD	, // PD 2 ** 19 ** USART1_RX	
+	PD	, // PD 1 ** 20 ** I2C_SDA	
+	PD	, // PD 0 ** 21 ** I2C_SCL	
+	PA	, // PA 0 ** 22 ** D22	
+	PA	, // PA 1 ** 23 ** D23	
+	PA	, // PA 2 ** 24 ** D24	
+	PA	, // PA 3 ** 25 ** D25	
+	PA	, // PA 4 ** 26 ** D26	
+	PA	, // PA 5 ** 27 ** D27	
+	PA	, // PA 6 ** 28 ** D28	
+	PA	, // PA 7 ** 29 ** D29	
+	PC	, // PC 7 ** 30 ** D30	
+	PC	, // PC 6 ** 31 ** D31	
+	PC	, // PC 5 ** 32 ** D32	
+	PC	, // PC 4 ** 33 ** D33	
+	PC	, // PC 3 ** 34 ** D34	
+	PC	, // PC 2 ** 35 ** D35	
+	PC	, // PC 1 ** 36 ** D36	
+	PC	, // PC 0 ** 37 ** D37	
+	PD	, // PD 7 ** 38 ** D38	
+	PG	, // PG 2 ** 39 ** D39	
+	PG	, // PG 1 ** 40 ** D40	
+	PG	, // PG 0 ** 41 ** D41	
+	PL	, // PL 7 ** 42 ** D42	
+	PL	, // PL 6 ** 43 ** D43	
+	PL	, // PL 5 ** 44 ** D44	
+	PL	, // PL 4 ** 45 ** D45	
+	PL	, // PL 3 ** 46 ** D46	
+	PL	, // PL 2 ** 47 ** D47	
+	PL	, // PL 1 ** 48 ** D48	
+	PL	, // PL 0 ** 49 ** D49	
+	PB	, // PB 3 ** 50 ** SPI_MISO	
+	PB	, // PB 2 ** 51 ** SPI_MOSI	
+	PB	, // PB 1 ** 52 ** SPI_SCK	
+	PB	, // PB 0 ** 53 ** SPI_SS	
+	PF	, // PF 0 ** 54 ** A0	
+	PF	, // PF 1 ** 55 ** A1	
+	PF	, // PF 2 ** 56 ** A2	
+	PF	, // PF 3 ** 57 ** A3	
+	PF	, // PF 4 ** 58 ** A4	
+	PF	, // PF 5 ** 59 ** A5	
+	PF	, // PF 6 ** 60 ** A6	
+	PF	, // PF 7 ** 61 ** A7	
+	PK	, // PK 0 ** 62 ** A8	
+	PK	, // PK 1 ** 63 ** A9	
+	PK	, // PK 2 ** 64 ** A10	
+	PK	, // PK 3 ** 65 ** A11	
+	PK	, // PK 4 ** 66 ** A12	
+	PK	, // PK 5 ** 67 ** A13	
+	PK	, // PK 6 ** 68 ** A14	
+	PK	, // PK 7 ** 69 ** A15	
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+	// PIN IN PORT		
+	// -------------------------------------------		
+	_BV( 0 )	, // PE 0 ** 0 ** USART0_RX	
+	_BV( 1 )	, // PE 1 ** 1 ** USART0_TX	
+	_BV( 4 )	, // PE 4 ** 2 ** PWM2	
+	_BV( 5 )	, // PE 5 ** 3 ** PWM3	
+	_BV( 5 )	, // PG 5 ** 4 ** PWM4	
+	_BV( 3 )	, // PE 3 ** 5 ** PWM5	
+	_BV( 3 )	, // PH 3 ** 6 ** PWM6	
+	_BV( 4 )	, // PH 4 ** 7 ** PWM7	
+	_BV( 5 )	, // PH 5 ** 8 ** PWM8	
+	_BV( 6 )	, // PH 6 ** 9 ** PWM9	
+	_BV( 4 )	, // PB 4 ** 10 ** PWM10	
+	_BV( 5 )	, // PB 5 ** 11 ** PWM11	
+	_BV( 6 )	, // PB 6 ** 12 ** PWM12	
+	_BV( 7 )	, // PB 7 ** 13 ** PWM13	
+	_BV( 1 )	, // PJ 1 ** 14 ** USART3_TX	
+	_BV( 0 )	, // PJ 0 ** 15 ** USART3_RX	
+	_BV( 1 )	, // PH 1 ** 16 ** USART2_TX	
+	_BV( 0 )	, // PH 0 ** 17 ** USART2_RX	
+	_BV( 3 )	, // PD 3 ** 18 ** USART1_TX	
+	_BV( 2 )	, // PD 2 ** 19 ** USART1_RX	
+	_BV( 1 )	, // PD 1 ** 20 ** I2C_SDA	
+	_BV( 0 )	, // PD 0 ** 21 ** I2C_SCL	
+	_BV( 0 )	, // PA 0 ** 22 ** D22	
+	_BV( 1 )	, // PA 1 ** 23 ** D23	
+	_BV( 2 )	, // PA 2 ** 24 ** D24	
+	_BV( 3 )	, // PA 3 ** 25 ** D25	
+	_BV( 4 )	, // PA 4 ** 26 ** D26	
+	_BV( 5 )	, // PA 5 ** 27 ** D27	
+	_BV( 6 )	, // PA 6 ** 28 ** D28	
+	_BV( 7 )	, // PA 7 ** 29 ** D29	
+	_BV( 7 )	, // PC 7 ** 30 ** D30	
+	_BV( 6 )	, // PC 6 ** 31 ** D31	
+	_BV( 5 )	, // PC 5 ** 32 ** D32	
+	_BV( 4 )	, // PC 4 ** 33 ** D33	
+	_BV( 3 )	, // PC 3 ** 34 ** D34	
+	_BV( 2 )	, // PC 2 ** 35 ** D35	
+	_BV( 1 )	, // PC 1 ** 36 ** D36	
+	_BV( 0 )	, // PC 0 ** 37 ** D37	
+	_BV( 7 )	, // PD 7 ** 38 ** D38	
+	_BV( 2 )	, // PG 2 ** 39 ** D39	
+	_BV( 1 )	, // PG 1 ** 40 ** D40	
+	_BV( 0 )	, // PG 0 ** 41 ** D41	
+	_BV( 7 )	, // PL 7 ** 42 ** D42	
+	_BV( 6 )	, // PL 6 ** 43 ** D43	
+	_BV( 5 )	, // PL 5 ** 44 ** D44	
+	_BV( 4 )	, // PL 4 ** 45 ** D45	
+	_BV( 3 )	, // PL 3 ** 46 ** D46	
+	_BV( 2 )	, // PL 2 ** 47 ** D47	
+	_BV( 1 )	, // PL 1 ** 48 ** D48	
+	_BV( 0 )	, // PL 0 ** 49 ** D49	
+	_BV( 3 )	, // PB 3 ** 50 ** SPI_MISO	
+	_BV( 2 )	, // PB 2 ** 51 ** SPI_MOSI	
+	_BV( 1 )	, // PB 1 ** 52 ** SPI_SCK	
+	_BV( 0 )	, // PB 0 ** 53 ** SPI_SS	
+	_BV( 0 )	, // PF 0 ** 54 ** A0	
+	_BV( 1 )	, // PF 1 ** 55 ** A1	
+	_BV( 2 )	, // PF 2 ** 56 ** A2	
+	_BV( 3 )	, // PF 3 ** 57 ** A3	
+	_BV( 4 )	, // PF 4 ** 58 ** A4	
+	_BV( 5 )	, // PF 5 ** 59 ** A5	
+	_BV( 6 )	, // PF 6 ** 60 ** A6	
+	_BV( 7 )	, // PF 7 ** 61 ** A7	
+	_BV( 0 )	, // PK 0 ** 62 ** A8	
+	_BV( 1 )	, // PK 1 ** 63 ** A9	
+	_BV( 2 )	, // PK 2 ** 64 ** A10	
+	_BV( 3 )	, // PK 3 ** 65 ** A11	
+	_BV( 4 )	, // PK 4 ** 66 ** A12	
+	_BV( 5 )	, // PK 5 ** 67 ** A13	
+	_BV( 6 )	, // PK 6 ** 68 ** A14	
+	_BV( 7 )	, // PK 7 ** 69 ** A15	
+};
 
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+	// TIMERS		
+	// -------------------------------------------		
+	NOT_ON_TIMER	, // PE 0 ** 0 ** USART0_RX	
+	NOT_ON_TIMER	, // PE 1 ** 1 ** USART0_TX	
+	TIMER3B	, // PE 4 ** 2 ** PWM2	
+	TIMER3C	, // PE 5 ** 3 ** PWM3	
+	TIMER0B	, // PG 5 ** 4 ** PWM4	
+	TIMER3A	, // PE 3 ** 5 ** PWM5	
+	TIMER4A	, // PH 3 ** 6 ** PWM6	
+	TIMER4B	, // PH 4 ** 7 ** PWM7	
+	TIMER4C	, // PH 5 ** 8 ** PWM8	
+	TIMER2B	, // PH 6 ** 9 ** PWM9	
+	TIMER2A	, // PB 4 ** 10 ** PWM10	
+	TIMER1A	, // PB 5 ** 11 ** PWM11	
+	TIMER1B	, // PB 6 ** 12 ** PWM12	
+	TIMER0A	, // PB 7 ** 13 ** PWM13	
+	NOT_ON_TIMER	, // PJ 1 ** 14 ** USART3_TX	
+	NOT_ON_TIMER	, // PJ 0 ** 15 ** USART3_RX	
+	NOT_ON_TIMER	, // PH 1 ** 16 ** USART2_TX	
+	NOT_ON_TIMER	, // PH 0 ** 17 ** USART2_RX	
+	NOT_ON_TIMER	, // PD 3 ** 18 ** USART1_TX	
+	NOT_ON_TIMER	, // PD 2 ** 19 ** USART1_RX	
+	NOT_ON_TIMER	, // PD 1 ** 20 ** I2C_SDA	
+	NOT_ON_TIMER	, // PD 0 ** 21 ** I2C_SCL	
+	NOT_ON_TIMER	, // PA 0 ** 22 ** D22	
+	NOT_ON_TIMER	, // PA 1 ** 23 ** D23	
+	NOT_ON_TIMER	, // PA 2 ** 24 ** D24	
+	NOT_ON_TIMER	, // PA 3 ** 25 ** D25	
+	NOT_ON_TIMER	, // PA 4 ** 26 ** D26	
+	NOT_ON_TIMER	, // PA 5 ** 27 ** D27	
+	NOT_ON_TIMER	, // PA 6 ** 28 ** D28	
+	NOT_ON_TIMER	, // PA 7 ** 29 ** D29	
+	NOT_ON_TIMER	, // PC 7 ** 30 ** D30	
+	NOT_ON_TIMER	, // PC 6 ** 31 ** D31	
+	NOT_ON_TIMER	, // PC 5 ** 32 ** D32	
+	NOT_ON_TIMER	, // PC 4 ** 33 ** D33	
+	NOT_ON_TIMER	, // PC 3 ** 34 ** D34	
+	NOT_ON_TIMER	, // PC 2 ** 35 ** D35	
+	NOT_ON_TIMER	, // PC 1 ** 36 ** D36	
+	NOT_ON_TIMER	, // PC 0 ** 37 ** D37	
+	NOT_ON_TIMER	, // PD 7 ** 38 ** D38	
+	NOT_ON_TIMER	, // PG 2 ** 39 ** D39	
+	NOT_ON_TIMER	, // PG 1 ** 40 ** D40	
+	NOT_ON_TIMER	, // PG 0 ** 41 ** D41	
+	NOT_ON_TIMER	, // PL 7 ** 42 ** D42	
+	NOT_ON_TIMER	, // PL 6 ** 43 ** D43	
+	TIMER5C	, // PL 5 ** 44 ** D44	
+	TIMER5B	, // PL 4 ** 45 ** D45	
+	TIMER5A	, // PL 3 ** 46 ** D46	
+	NOT_ON_TIMER	, // PL 2 ** 47 ** D47	
+	NOT_ON_TIMER	, // PL 1 ** 48 ** D48	
+	NOT_ON_TIMER	, // PL 0 ** 49 ** D49	
+	NOT_ON_TIMER	, // PB 3 ** 50 ** SPI_MISO	
+	NOT_ON_TIMER	, // PB 2 ** 51 ** SPI_MOSI	
+	NOT_ON_TIMER	, // PB 1 ** 52 ** SPI_SCK	
+	NOT_ON_TIMER	, // PB 0 ** 53 ** SPI_SS	
+	NOT_ON_TIMER	, // PF 0 ** 54 ** A0	
+	NOT_ON_TIMER	, // PF 1 ** 55 ** A1	
+	NOT_ON_TIMER	, // PF 2 ** 56 ** A2	
+	NOT_ON_TIMER	, // PF 3 ** 57 ** A3	
+	NOT_ON_TIMER	, // PF 4 ** 58 ** A4	
+	NOT_ON_TIMER	, // PF 5 ** 59 ** A5	
+	NOT_ON_TIMER	, // PF 6 ** 60 ** A6	
+	NOT_ON_TIMER	, // PF 7 ** 61 ** A7	
+	NOT_ON_TIMER	, // PK 0 ** 62 ** A8	
+	NOT_ON_TIMER	, // PK 1 ** 63 ** A9	
+	NOT_ON_TIMER	, // PK 2 ** 64 ** A10	
+	NOT_ON_TIMER	, // PK 3 ** 65 ** A11	
+	NOT_ON_TIMER	, // PK 4 ** 66 ** A12	
+	NOT_ON_TIMER	, // PK 5 ** 67 ** A13	
+	NOT_ON_TIMER	, // PK 6 ** 68 ** A14	
+	NOT_ON_TIMER	, // PK 7 ** 69 ** A15	
+};
+#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)
 // these arrays map port names (e.g. port B) to the
 // appropriate addresses for various functions (e.g. reading
 // and writing)
-const uint8_t PROGMEM port_to_mode_PGM[] =
+const uint16_t PROGMEM port_to_mode_PGM[] =
 {
         NOT_A_PORT,
-	(uint8_t) (uint16_t) &DDRA,
+    &DDRA,
-	(uint8_t) (uint16_t) &DDRB,
+        &DDRB,
-	(uint8_t) (uint16_t) &DDRC,
+        &DDRC,
-	(uint8_t) (uint16_t) &DDRD,
+        &DDRD,
 };
 
-const uint8_t PROGMEM port_to_output_PGM[] =
+const uint16_t PROGMEM port_to_output_PGM[] =
 {
         NOT_A_PORT,
-	(uint8_t) (uint16_t) &PORTA,
+        &PORTA,
-	(uint8_t) (uint16_t) &PORTB,
+        &PORTB,
-	(uint8_t) (uint16_t) &PORTC,
+        &PORTC,
-	(uint8_t) (uint16_t) &PORTD,
+        &PORTD,
 };
-
+const uint16_t PROGMEM port_to_input_PGM[] =
-const uint8_t PROGMEM port_to_input_PGM[] =
 {
         NOT_A_PORT,
-	(uint8_t) (uint16_t) &PINA,
+        &PINA,
-	(uint8_t) (uint16_t) &PINB,
+        &PINB,
-	(uint8_t) (uint16_t) &PINC,
+        &PINC,
-	(uint8_t) (uint16_t) &PIND,
+        &PIND,
 };
-
 const uint8_t PROGMEM digital_pin_to_port_PGM[] =
 {
         PB, /* 0 */
@@ -126,7 +442,6 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[] =
         PA,
         PA  /* 31 */
 };
-
 const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] =
 {
         _BV(0), /* 0, port B */
@@ -162,7 +477,6 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] =
         _BV(1),
         _BV(0)
 };
-
 const uint8_t PROGMEM digital_pin_to_timer_PGM[] =
 {
         NOT_ON_TIMER,   /* 0  - PB0 */
@@ -198,3 +512,116 @@ const uint8_t PROGMEM digital_pin_to_timer_PGM[] =
         NOT_ON_TIMER,   /* 30 - PA6 */
         NOT_ON_TIMER   /* 31 - PA7 */
 };
+
+#else
+// these arrays map port names (e.g. port B) to the
+// appropriate addresses for various functions (e.g. reading
+// and writing)
+const uint16_t PROGMEM port_to_mode_PGM[] = {
+	NOT_A_PORT,
+	NOT_A_PORT,
+	&DDRB,
+	&DDRC,
+	&DDRD,
+};
+
+const uint16_t PROGMEM port_to_output_PGM[] = {
+	NOT_A_PORT,
+	NOT_A_PORT,
+	&PORTB,
+	&PORTC,
+	&PORTD,
+};
+
+const uint16_t PROGMEM port_to_input_PGM[] = {
+	NOT_A_PORT,
+	NOT_A_PORT,
+	&PINB,
+	&PINC,
+	&PIND,
+};
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+	PD, /* 0 */
+	PD,
+	PD,
+	PD,
+	PD,
+	PD,
+	PD,
+	PD,
+	PB, /* 8 */
+	PB,
+	PB,
+	PB,
+	PB,
+	PB,
+	PC, /* 14 */
+	PC,
+	PC,
+	PC,
+	PC,
+	PC,
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+	_BV(0), /* 0, port D */
+	_BV(1),
+	_BV(2),
+	_BV(3),
+	_BV(4),
+	_BV(5),
+	_BV(6),
+	_BV(7),
+	_BV(0), /* 8, port B */
+	_BV(1),
+	_BV(2),
+	_BV(3),
+	_BV(4),
+	_BV(5),
+	_BV(0), /* 14, port C */
+	_BV(1),
+	_BV(2),
+	_BV(3),
+	_BV(4),
+	_BV(5),
+};
+
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+	NOT_ON_TIMER, /* 0 - port D */
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	// on the ATmega168, digital pin 3 has hardware pwm
+#if defined(__AVR_ATmega8__)
+	NOT_ON_TIMER,
+#else
+	TIMER2B,
+#endif
+	NOT_ON_TIMER,
+	// on the ATmega168, digital pins 5 and 6 have hardware pwm
+#if defined(__AVR_ATmega8__)
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+#else
+	TIMER0B,
+	TIMER0A,
+#endif
+	NOT_ON_TIMER,
+	NOT_ON_TIMER, /* 8 - port B */
+	TIMER1A,
+	TIMER1B,
+#if defined(__AVR_ATmega8__)
+	TIMER2,
+#else
+	TIMER2A,
+#endif
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	NOT_ON_TIMER, /* 14 - port C */
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+};
+#endif

ArduinoAddons/Arduino_0.xx/Sanguino/cores/arduino/pins_arduino.h

@@ -39,19 +39,43 @@
 #define TIMER2A 6
 #define TIMER2B 7
 
+#define TIMER3A 8
+#define TIMER3B 9
+#define TIMER3C 10
+#define TIMER4A 11
+#define TIMER4B 12
+#define TIMER4C 13
+#define TIMER5A 14
+#define TIMER5B 15
+#define TIMER5C 16
+
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+const static uint8_t SS   = 53;
+const static uint8_t MOSI = 51;
+const static uint8_t MISO = 50;
+const static uint8_t SCK  = 52;
+#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)
 const static uint8_t SS   = 4;
 const static uint8_t MOSI = 5;
 const static uint8_t MISO = 6;
 const static uint8_t SCK  = 7;
 
-extern const uint8_t PROGMEM port_to_mode_PGM[];
+#else
-extern const uint8_t PROGMEM port_to_input_PGM[];
+const static uint8_t SS   = 10;
-extern const uint8_t PROGMEM port_to_output_PGM[];
+const static uint8_t MOSI = 11;
+const static uint8_t MISO = 12;
+const static uint8_t SCK  = 13;
+#endif
+
+// On the ATmega1280, the addresses of some of the port registers are
+// greater than 255, so we can't store them in uint8_t's.
+extern const uint16_t PROGMEM port_to_mode_PGM[];
+extern const uint16_t PROGMEM port_to_input_PGM[];
+extern const uint16_t PROGMEM port_to_output_PGM[];
 
 extern const uint8_t PROGMEM digital_pin_to_port_PGM[];
-extern const uint8_t PROGMEM digital_pin_to_bit_PGM[];
+// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[];
 extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[];
-
 extern const uint8_t PROGMEM digital_pin_to_timer_PGM[];
 
 // Get the bit location within the hardware port of the given virtual pin.
@@ -63,8 +87,8 @@ extern const uint8_t PROGMEM digital_pin_to_timer_PGM[];
 #define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) )
 #define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) )
 #define analogInPinToBit(P) (P)
-#define portOutputRegister(P) ( (volatile uint8_t *)( (uint16_t) pgm_read_byte( port_to_output_PGM + (P))) )
+#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) )
-#define portInputRegister(P) ( (volatile uint8_t *)( (uint16_t) pgm_read_byte( port_to_input_PGM + (P))) )
+#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) )
-#define portModeRegister(P) ( (volatile uint8_t *)( (uint16_t) pgm_read_byte( port_to_mode_PGM + (P))) )
+#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) )
 
 #endif

ArduinoAddons/Arduino_0.xx/Sanguino/cores/arduino/wiring.h

@@ -25,7 +25,6 @@
 #ifndef Wiring_h
 #define Wiring_h
 
-#include <math.h>
 #include <avr/io.h>
 #include <stdlib.h>
 #include "binary.h"
@@ -77,7 +76,10 @@ extern "C"{
 #define max(a,b) ((a)>(b)?(a):(b))
 #define abs(x) ((x)>0?(x):-(x))
 #define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
-#define round(x)     ((x)>=0?(long)((x)+0.5):(long)((x)-0.5))
+
+// Removed to work with newer AVRLIBC
+//#define round(x)     ((x)>=0?(long)((x)+0.5):(long)((x)-0.5))
+
 #define radians(deg) ((deg)*DEG_TO_RAD)
 #define degrees(rad) ((rad)*RAD_TO_DEG)
 #define sq(x) ((x)*(x))

ArduinoAddons/Arduino_0.xx/Sanguino/cores/arduino/wiring_private.h

@@ -24,10 +24,10 @@
 
 #ifndef WiringPrivate_h
 #define WiringPrivate_h
-#include <math.h>
+
 #include <avr/io.h>
 #include <avr/interrupt.h>
-#include <util/delay.h>
+#include <avr/delay.h>
 #include <stdio.h>
 #include <stdarg.h>
 
@@ -55,6 +55,8 @@ extern "C"{
 
 #if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
 #define EXTERNAL_NUM_INTERRUPTS 8
+#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)
+#define EXTERNAL_NUM_INTERRUPTS 3
 #else
 #define EXTERNAL_NUM_INTERRUPTS 2
 #endif

ArduinoAddons/Arduino_0.xx/libraries/LiquidCrystal/LiquidCrystal.cpp

@@ -21,7 +21,7 @@
 //    S = 0; No shift 
 //
 // Note, however, that resetting the Arduino doesn't reset the LCD, so we
-// can't assume that its in that state when a sketch starts (and the
+// can't assume that it's in that state when a sketch starts (and the
 // LiquidCrystal constructor is called).
 
 LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,

ArduinoAddons/Arduino_0.xx/libraries/U8glib/ChangeLog

@@ -0,0 +1,114 @@
+
+u8glib ChangeLog
+
+2012-01-01      v0.01   Oliver Kraus <olikraus@gmail.com>
+  * first beta release for Arduino IDE with simple SSD1325 support
+2012-01-04      v0.02   Oliver Kraus <olikraus@gmail.com>
+  * support for some more display types
+2012-01-07      v0.03   Oliver Kraus <olikraus@gmail.com>
+  * fixed some bugs, added more examples
+2012-01-07      v0.04   Oliver Kraus <olikraus@gmail.com>
+  * single font file
+2012-01-08      v0.05   Oliver Kraus <olikraus@gmail.com>
+  * Cleanup
+  * More examples
+  * SSD1325 graylevel support
+2012-01-15      v0.06   Oliver Kraus <olikraus@gmail.com>
+  * LM6063 support
+2012-01-17      v0.07   Oliver Kraus <olikraus@gmail.com>
+  * LM6063 support (update)
+2012-01-19      v0.08   Oliver Kraus <olikraus@gmail.com>
+  * ST7920 beta device
+2012-01-21      v0.09   Oliver Kraus <olikraus@gmail.com>
+  * ST7920 fixed (192x32)
+  * fixed bug in com layer if pins are none
+  * str reference position
+2012-01-22      v0.10   Oliver Kraus <olikraus@gmail.com>
+  * Experimental LM6059 
+2012-01-24      v0.11   Oliver Kraus <olikraus@gmail.com>
+  * new st7920 memory layout for 128x64 lcd
+  * experimental st7920 SPI
+2012-01-25      v0.12   Oliver Kraus <olikraus@gmail.com>
+  * fixed st7920 memory layout for 128x64 lcd
+  * ST7920 SPI performance improvement
+2012-01-27	v0.13	Oliver Kraus <olikraus@gmail.com>
+  * LM6059 (Adafruit Display) fixed
+2012-02-01	v0.14	Oliver Kraus <olikraus@gmail.com>
+  * undoRotation()
+  * setRot..() can be used without restrictions
+  * Class U8GLIB derived from Print class. New function "print" 
+  * Fixed memory index bug in the page management procedures
+2012-02-12      v1.00	Oliver Kraus <olikraus@gmail.com>
+  * XBM support
+  * F() macro support
+  * str-rotation commands support ref-height and ref-position
+2012-03-17      v1.02	Oliver Kraus <olikraus@gmail.com>
+  * U8GLIB_ST7687_C144MVGD spi experimental
+  * U8GLIB_LC7981_160X80 8bit
+  * Intersection test for frame and box procedures
+  * 4L double memory architecture  
+  * setContrast infrastructure implemented, but not available for all devices
+  * drawCircle, drawDisc
+  * Bugfix for drawStr270
+  * New examples: Chess (ported from dogm128 lib) and GraphicsTest
+2012-03-31      v1.03	Oliver Kraus <olikraus@gmail.com>
+  * experimental parallel mode atmega
+  * more unifont code pages
+  * double memory, for NHD OLED and DOGXL160
+  * "Menu" example
+  * drawLine
+2012-04-13      v1.04	Oliver Kraus <olikraus@gmail.com>
+  * Adjust U8grelease: Same version number with AVR and Arduino variant
+2012-06-10	v1.05	Oliver Kraus <olikraus@gmail.com>
+  * m2icon font
+  * experimental lc7981_240x64 device
+  * experimental ssd1306
+  * experimental ssd1322
+  * Hardware state backup/restore procedure
+2012-06-15	v1.06	Oliver Kraus <olikraus@gmail.com>
+  * SBN1661 (SED1520?) support
+  * SSD1306 support
+  * U8G_PROGMEM bugfix
+2012-07-04	v1.07	Oliver Kraus <olikraus@gmail.com>
+  * Added Makefiles for AVR release (issue 77)
+  * Fixed examples for Arduino Environment (issue 78)
+2012-10-02	v1.08	Oliver Kraus <olikraus@gmail.com>
+  * Improved delay calculation for strobe pulse (issue 20)
+  * Support Chipkit (issue 39)
+  * Improved speed for ST7920 parallel mode (issue 79)
+  * Overall speed optimization (new page intersection algorithm)
+  * Support for Displays Newhaven NHD-C12864, CrystalFontz GFAG20232, Seeedstudio 96x96 OLED
+  * Added SPI support for ST7920 with plain AVR (issue 85)
+  * Add more LC7981 devices
+2012-12-23	v1.09	  Oliver Kraus <olikraus@gmail.com>
+  * Support for Displaytech 64128n
+  * Support for MINI12864
+  * HW SPI for ST7920
+  * Add delay after sending a byte with (ST7920 com)
+  * Support ATTiny
+  * Support I2C for SSD1306
+  * bdf2u8g, Windows executable released
+  * LC7981 320x64
+  * Scalue up: u8g::setScale2x2
+  * Added more bitmap fonts
+  * u8g::drawRBox(), u8g::drawRFrame()
+  * Support for CFAG20232 (st7920_202x32)
+  * Fixed ST7920 SW SPI for ChipKit
+  * Support for tls8204
+2013-02-02	v1.10	  Oliver Kraus <olikraus@gmail.com>
+  * Support for SSD1309
+  * Support for NHD-C12832A1Z 
+  * Bugfix: Fixed reset controll in parallel modes
+  * Bugfix: Fixed calculation of cursor position
+  * Bugfix: ST7920 parallel mode
+2013-03-2	v1.11	  Oliver Kraus <olikraus@gmail.com>
+  * Support for T6963
+  * Support for Arduino Due
+  * Sleep Mode
+  * 4x mode for ST7920
+  * New C++ interface for ST7920 
+
+  
+  
+  
+  

ArduinoAddons/Arduino_0.xx/libraries/U8glib/INSTALL.TXT

@@ -0,0 +1,21 @@
+
+U8GLIB
+http://code.google.com/p/u8glib/
+
+
+Install instructions for the Arduino environment.
+
+  1. Unzip u8glib_arduino_vX.XX.zip into the "libraries" folder
+  2. Start Arduino IDE
+
+Install instructions for the Chipkit (Arduino) environment.
+
+  1. cd <mpide-... path>/libraries
+  2. unzip u8glib_arduino_vX.XX.zip
+  3. cd <mpide-... path>///hardware/pic32/libraries
+  4. again: u8glib_arduino_vX.XX.zip
+  5. Open hardware/pic32/cores/pic32/Print.h
+	  Remove line
+	    #define BYTE 0
+	  from the file, use PRINT_BYTE instead of BYTE. 
+	

ArduinoAddons/Arduino_0.xx/libraries/U8glib/U8glib.cpp

@@ -0,0 +1,80 @@
+/*
+
+  U8glib.cpp
+
+  C++ Interface
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+
+*/
+
+#include "U8glib.h"
+
+
+
+uint8_t U8GLIB::initSPI(u8g_dev_t *dev, uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset)
+{
+  prepare();
+  return u8g_InitSPI(&u8g, dev, sck, mosi, cs, a0, reset);
+}
+
+uint8_t U8GLIB::initHWSPI(u8g_dev_t *dev, uint8_t cs, uint8_t a0, uint8_t reset)
+{
+  prepare();
+  return u8g_InitHWSPI(&u8g, dev, cs, a0, reset);
+}
+
+uint8_t U8GLIB::initI2C(u8g_dev_t *dev, uint8_t options)
+{
+  prepare();
+  return u8g_InitI2C(&u8g, dev, options);
+}
+
+uint8_t U8GLIB::init8Bit(u8g_dev_t *dev, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+    uint8_t en, uint8_t cs1, uint8_t cs2, uint8_t di, uint8_t rw, uint8_t reset)
+{
+  prepare();
+  return u8g_Init8Bit(&u8g, dev, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, cs2, di, rw, reset); 
+}
+
+uint8_t U8GLIB::init8BitFixedPort(u8g_dev_t *dev, uint8_t en, uint8_t cs, uint8_t di, uint8_t rw, uint8_t reset)
+{
+  prepare();
+  return u8g_Init8BitFixedPort(&u8g, dev, en, cs, di, rw, reset);
+}
+
+uint8_t U8GLIB::initRW8Bit(u8g_dev_t *dev, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+    uint8_t cs, uint8_t a0, uint8_t wr, uint8_t rd, uint8_t reset)
+{
+  prepare();
+  return u8g_InitRW8Bit(&u8g, dev, d0, d1, d2, d3, d4, d5, d6, d7, cs, a0, wr, rd, reset); 
+}
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/U8glib.h

@@ -0,0 +1,826 @@
+/*
+
+  U8glib.h
+  
+  C++ Interface
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+
+*/
+
+#ifndef _CPP_U8GLIB
+#define _CPP_U8GLIB
+
+#include <Print.h>
+#include "utility/u8g.h"
+
+
+class U8GLIB : public Print
+{
+  private:
+    u8g_t u8g;
+    u8g_uint_t tx, ty;          // current position for the Print base class procedures
+    uint8_t is_begin;
+
+    void prepare(void) { tx = 0; ty = 0; is_begin = 0; }
+    void cbegin(void) { if ( is_begin == 0 ) { is_begin = 1; u8g_Begin(&u8g); } }
+    uint8_t initSPI(u8g_dev_t *dev, uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE);
+    uint8_t initHWSPI(u8g_dev_t *dev, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE);
+    uint8_t initI2C(u8g_dev_t *dev, uint8_t options);
+  protected:
+    uint8_t init8BitFixedPort(u8g_dev_t *dev, uint8_t en, uint8_t cs, uint8_t di, uint8_t rw, uint8_t reset);
+  private:
+    uint8_t init8Bit(u8g_dev_t *dev, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t cs1, uint8_t cs2, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE);
+    uint8_t initRW8Bit(u8g_dev_t *dev, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+      uint8_t cs, uint8_t a0, uint8_t wr, uint8_t rd, uint8_t reset);
+  public:
+  
+    /* constructor */
+    U8GLIB(void)
+      { }
+    U8GLIB(u8g_dev_t *dev)
+      { prepare(); u8g_Init(&u8g, dev); }
+    U8GLIB(u8g_dev_t *dev, uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset) 
+      { initSPI(dev, sck, mosi, cs, a0, reset); }
+    U8GLIB(u8g_dev_t *dev, uint8_t cs, uint8_t a0, uint8_t reset) 
+      { initHWSPI(dev, cs, a0, reset); }
+    U8GLIB(u8g_dev_t *dev, uint8_t options) 
+      { initI2C(dev, options); }
+    U8GLIB(u8g_dev_t *dev, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t cs1, uint8_t cs2, uint8_t di, uint8_t rw, uint8_t reset) 
+      { init8Bit(dev, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, cs2, di, rw, reset); }
+    U8GLIB(u8g_dev_t *dev, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t cs, uint8_t a0, uint8_t wr, uint8_t rd, uint8_t reset) 
+      { initRW8Bit(dev, d0, d1, d2, d3, d4, d5, d6, d7, cs, a0, wr, rd, reset); }
+
+    uint8_t begin(void) { is_begin = 1; return u8g_Begin(&u8g); }
+      
+    void setPrintPos(u8g_uint_t x, u8g_uint_t y) { tx = x; ty = y; }
+    u8g_t *getU8g(void) { return &u8g; }
+    
+    
+    /* implementation of the write interface to the print class */
+#if defined(ARDUINO) && ARDUINO >= 100
+    size_t write(uint8_t c) { tx += u8g_DrawGlyph(&u8g, tx, ty, c); return 1;}
+#else
+    void write(uint8_t c) { tx += u8g_DrawGlyph(&u8g, tx, ty, c); }
+#endif
+    
+     /* screen rotation */
+    void undoRotation(void) { u8g_UndoRotation(&u8g); }
+    void setRot90(void) { u8g_SetRot90(&u8g); }
+    void setRot180(void) { u8g_SetRot180(&u8g); }
+    void setRot270(void) { u8g_SetRot270(&u8g); }
+
+     /* screen scaling */
+    void undoScale(void) { u8g_UndoScale(&u8g); }
+    void setScale2x2(void) { u8g_SetScale2x2(&u8g); }
+    
+     /* picture loop */
+    void firstPage(void) { cbegin(); u8g_FirstPage(&u8g); }
+    uint8_t nextPage(void) { return u8g_NextPage(&u8g); }
+    
+    /* system commands */
+    uint8_t setContrast(uint8_t contrast) { cbegin(); return u8g_SetContrast(&u8g, contrast); }
+    void sleepOn(void) { u8g_SleepOn(&u8g); }
+    void sleepOff(void) { u8g_SleepOff(&u8g); }
+    
+    /* graphic primitives */
+    void setColorIndex(uint8_t color_index) { u8g_SetColorIndex(&u8g, color_index); }
+    uint8_t getColorIndex(void) { return u8g_GetColorIndex(&u8g); }
+    
+    void setDefaultForegroundColor(void) { u8g_SetDefaultForegroundColor(&u8g);  }
+    void setDefaultBackgroundColor(void) { u8g_SetDefaultBackgroundColor(&u8g);  }
+    void setDefaultMidColor(void) { u8g_SetDefaultMidColor(&u8g);  }
+    
+    u8g_uint_t getWidth(void) { return u8g_GetWidth(&u8g); }
+    u8g_uint_t getHeight(void) { return u8g_GetHeight(&u8g); }
+    uint8_t getMode(void) { return u8g_GetMode(&u8g); }
+
+    void drawPixel(u8g_uint_t x, u8g_uint_t y) { return u8g_DrawPixel(&u8g, x, y); }
+    void drawHLine(u8g_uint_t x, u8g_uint_t y, u8g_uint_t w) { u8g_DrawHLine(&u8g, x, y, w); }  
+    void drawVLine(u8g_uint_t x, u8g_uint_t y, u8g_uint_t h) { u8g_DrawVLine(&u8g, x, y, h); }
+    void drawLine(u8g_uint_t x1, u8g_uint_t y1, u8g_uint_t x2, u8g_uint_t y2) { u8g_DrawLine(&u8g, x1, y1, x2, y2); }
+    
+    void drawFrame(u8g_uint_t x, u8g_uint_t y, u8g_uint_t w, u8g_uint_t h) { u8g_DrawFrame(&u8g, x, y, w, h); }
+    void drawRFrame(u8g_uint_t x, u8g_uint_t y, u8g_uint_t w, u8g_uint_t h, u8g_uint_t r) { u8g_DrawRFrame(&u8g, x, y, w, h,r); }
+    void drawBox(u8g_uint_t x, u8g_uint_t y, u8g_uint_t w, u8g_uint_t h) { u8g_DrawBox(&u8g, x, y, w, h); }
+    void drawRBox(u8g_uint_t x, u8g_uint_t y, u8g_uint_t w, u8g_uint_t h, u8g_uint_t r) { u8g_DrawRBox(&u8g, x, y, w, h,r); }
+
+    void drawCircle(u8g_uint_t x0, u8g_uint_t y0, u8g_uint_t rad, uint8_t opt = U8G_DRAW_ALL) { u8g_DrawCircle(&u8g, x0, y0, rad, opt); }
+    void drawDisc(u8g_uint_t x0, u8g_uint_t y0, u8g_uint_t rad, uint8_t opt = U8G_DRAW_ALL) { u8g_DrawDisc(&u8g, x0, y0, rad, opt); }
+     
+    /* bitmap handling */
+    void drawBitmap(u8g_uint_t x, u8g_uint_t y, u8g_uint_t cnt, u8g_uint_t h, const uint8_t *bitmap) 
+      { u8g_DrawBitmap(&u8g, x, y, cnt, h, bitmap); }
+    void drawBitmapP(u8g_uint_t x, u8g_uint_t y, u8g_uint_t cnt, u8g_uint_t h, const u8g_pgm_uint8_t *bitmap)
+      { u8g_DrawBitmapP(&u8g, x, y, cnt, h, bitmap); }
+
+    void drawXBM(u8g_uint_t x, u8g_uint_t y, u8g_uint_t w, u8g_uint_t h, const uint8_t *bitmap)
+      { u8g_DrawXBM(&u8g, x, y, w, h, bitmap); }
+    void drawXBMP(u8g_uint_t x, u8g_uint_t y, u8g_uint_t w, u8g_uint_t h, const u8g_pgm_uint8_t *bitmap)
+      { u8g_DrawXBMP(&u8g, x, y, w, h, bitmap); }
+    
+      
+    /* font handling */
+    void setFont(const u8g_fntpgm_uint8_t *font) {u8g_SetFont(&u8g, font); }
+    int8_t getFontAscent(void) { return u8g_GetFontAscent(&u8g); }
+    int8_t getFontDescent(void) { return u8g_GetFontDescent(&u8g); }
+    int8_t getFontLineSpacing(void) { return u8g_GetFontLineSpacing(&u8g); }
+    
+    u8g_uint_t drawStr(u8g_uint_t x, u8g_uint_t y, const char *s) { return u8g_DrawStr(&u8g, x, y, s); }
+    u8g_uint_t drawStr90(u8g_uint_t x, u8g_uint_t y, const char *s) { return u8g_DrawStr90(&u8g, x, y, s); }
+    u8g_uint_t drawStr180(u8g_uint_t x, u8g_uint_t y, const char *s) { return u8g_DrawStr180(&u8g, x, y, s); }
+    u8g_uint_t drawStr270(u8g_uint_t x, u8g_uint_t y, const char *s) { return u8g_DrawStr270(&u8g, x, y, s); }
+    u8g_uint_t drawStrP(u8g_uint_t x, u8g_uint_t y, const u8g_pgm_uint8_t *s) { return u8g_DrawStrP(&u8g, x, y, s); }
+    u8g_uint_t drawStr90P(u8g_uint_t x, u8g_uint_t y, const u8g_pgm_uint8_t *s) { return u8g_DrawStr90P(&u8g, x, y, s); }
+    u8g_uint_t drawStr180P(u8g_uint_t x, u8g_uint_t y, const u8g_pgm_uint8_t *s) { return u8g_DrawStr180P(&u8g, x, y, s); }
+    u8g_uint_t drawStr270P(u8g_uint_t x, u8g_uint_t y, const u8g_pgm_uint8_t *s) { return u8g_DrawStr270P(&u8g, x, y, s); }
+    
+    void setFontPosBaseline(void) { u8g_SetFontPosBaseline(&u8g); }
+    void setFontPosBottom(void) { u8g_SetFontPosBottom(&u8g); }
+    void setFontPosCenter(void) { u8g_SetFontPosCenter(&u8g); }
+    void setFontPosTop(void) { u8g_SetFontPosTop(&u8g); }
+
+    void setFontRefHeightText(void) { u8g_SetFontRefHeightText(&u8g); }
+    void setFontRefHeightExtendedText(void) { u8g_SetFontRefHeightExtendedText(&u8g); }
+    void setFontRefHeightAll(void) { u8g_SetFontRefHeightAll(&u8g); }  
+    void setFontLineSpacingFactor(uint8_t factor) { u8g_SetFontLineSpacingFactor(&u8g, factor); }
+
+
+    u8g_uint_t getStrPixelWidth(const char *s) { return u8g_GetStrPixelWidth(&u8g, s); }
+    u8g_uint_t getStrPixelWidthP(u8g_pgm_uint8_t *s) { return u8g_GetStrPixelWidthP(&u8g, s); }
+    u8g_uint_t getStrWidth(const char *s) { return u8g_GetStrWidth(&u8g, s); } 
+    u8g_uint_t getStrWidthP(u8g_pgm_uint8_t *s) { return u8g_GetStrWidthP(&u8g, s); }
+    
+    void setHardwareBackup(u8g_state_cb backup_cb) { u8g_SetHardwareBackup(&u8g, backup_cb); }
+    
+#if defined(ARDUINO) && ARDUINO >= 100
+    // support for the F() macro
+    
+    u8g_uint_t drawStr(u8g_uint_t x, u8g_uint_t y, const __FlashStringHelper *s) { return u8g_DrawStrP(&u8g, x, y, (u8g_pgm_uint8_t *)s); }
+    u8g_uint_t drawStr90(u8g_uint_t x, u8g_uint_t y, const __FlashStringHelper *s) { return u8g_DrawStr90P(&u8g, x, y, (u8g_pgm_uint8_t *)s); }
+    u8g_uint_t drawStr180(u8g_uint_t x, u8g_uint_t y, const __FlashStringHelper *s) { return u8g_DrawStr180P(&u8g, x, y, (u8g_pgm_uint8_t *)s); }
+    u8g_uint_t drawStr270(u8g_uint_t x, u8g_uint_t y, const __FlashStringHelper *s) { return u8g_DrawStr270P(&u8g, x, y, (u8g_pgm_uint8_t *)s); }
+    
+    u8g_uint_t getStrPixelWidth(const __FlashStringHelper *s) { return u8g_GetStrPixelWidthP(&u8g, (u8g_pgm_uint8_t *)s); }
+    u8g_uint_t getStrWidth(const __FlashStringHelper *s) { return u8g_GetStrWidthP(&u8g, (u8g_pgm_uint8_t *)s); }
+#endif
+
+    /* cursor handling */
+    void setCursorFont(const u8g_pgm_uint8_t *cursor_font) { u8g_SetCursorFont(&u8g, cursor_font); }
+    void setCursorStyle(uint8_t encoding) { u8g_SetCursorStyle(&u8g, encoding); }
+    void setCursorPos(u8g_uint_t cursor_x, u8g_uint_t cursor_y) { u8g_SetCursorPos(&u8g, cursor_x, cursor_y); }
+    void setCursorColor(uint8_t fg, uint8_t bg) { u8g_SetCursorColor(&u8g, fg, bg); }
+    void enableCursor(void) { u8g_EnableCursor(&u8g); }
+    void disableCursor(void) { u8g_DisableCursor(&u8g); }
+    void drawCursor(void)  { u8g_DrawCursor(&u8g); }
+    
+    /* virtual screen */
+    
+    void setVirtualScreenDimension(u8g_uint_t width, u8g_uint_t height) { u8g_SetVirtualScreenDimension(&u8g, width, height); }
+    uint8_t addToVirtualScreen(u8g_uint_t x, u8g_uint_t y, U8GLIB &child_u8g) { return u8g_AddToVirtualScreen(&u8g, x, y, &child_u8g.u8g); }
+
+};
+
+
+class U8GLIB_DOGS102 : public U8GLIB 
+{
+  public:
+    U8GLIB_DOGS102(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_uc1701_dogs102_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_DOGS102(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_uc1701_dogs102_hw_spi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_MINI12864 : public U8GLIB 
+{
+  public:
+    U8GLIB_MINI12864(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_uc1701_mini12864_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_MINI12864(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_uc1701_mini12864_hw_spi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_DOGM132 : public U8GLIB 
+{
+  public:
+    U8GLIB_DOGM132(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7565_dogm132_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_DOGM132(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7565_dogm132_hw_spi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_NHD_C12832 : public U8GLIB 
+{
+  public:
+    U8GLIB_NHD_C12832(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7565_nhd_c12832_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_NHD_C12832(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7565_nhd_c12832_hw_spi, cs, a0, reset)
+      { }
+    U8GLIB_NHD_C12832(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t cs1, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7565_nhd_c12832_parallel, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, U8G_PIN_NONE, di, rw, reset)
+      { }
+};
+
+class U8GLIB_DOGM128 : public U8GLIB 
+{
+  public:
+    U8GLIB_DOGM128(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7565_dogm128_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_DOGM128(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7565_dogm128_hw_spi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_LM6059 : public U8GLIB 
+{
+  public:
+    U8GLIB_LM6059(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7565_lm6059_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_LM6059(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7565_lm6059_hw_spi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_LM6063 : public U8GLIB 
+{
+  public:
+    U8GLIB_LM6063(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7565_lm6063_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_LM6063(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7565_lm6063_hw_spi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_64128N : public U8GLIB 
+{
+  public:
+    U8GLIB_64128N(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7565_64128n_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_64128N(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7565_64128n_hw_spi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_NHD_C12864 : public U8GLIB 
+{
+  public:
+    U8GLIB_NHD_C12864(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7565_nhd_c12864_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_NHD_C12864(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7565_nhd_c12864_hw_spi, cs, a0, reset)
+      { }
+};
+
+
+class U8GLIB_ST7920_128X64 : public U8GLIB 
+{
+  public:
+    U8GLIB_ST7920_128X64(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_128x64_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_ST7920_128X64(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_128x64_hw_spi, cs, a0, reset)
+      { }
+    U8GLIB_ST7920_128X64(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t cs1, uint8_t cs2, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_128x64_8bit, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, cs2, di, rw, reset)
+      { }
+    // U8GLIB_ST7920_128X64(uint8_t cs) 
+    //   : U8GLIB(&u8g_dev_st7920_128x64_sw_spi, cs, U8G_PIN_NONE, U8G_PIN_NONE)
+    //   { }
+};
+
+class U8GLIB_ST7920_128X64_1X : public U8GLIB 
+{
+  public:
+    U8GLIB_ST7920_128X64_1X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_128x64_sw_spi, sck, mosi, cs, U8G_PIN_NONE, reset)		// a0 = U8G_PIN_NONE
+      { }
+    U8GLIB_ST7920_128X64_1X(uint8_t cs, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_128x64_hw_spi, cs, U8G_PIN_NONE, reset)			// a0 = U8G_PIN_NONE
+      { }
+    U8GLIB_ST7920_128X64_1X(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_128x64_8bit, d0, d1, d2, d3, d4, d5, d6, d7, en, U8G_PIN_NONE, U8G_PIN_NONE, di, rw, reset)  // cs1 = cs2 = U8G_PIN_NONE
+      { }
+};
+
+class U8GLIB_ST7920_128X64_4X : public U8GLIB 
+{
+  public:
+    U8GLIB_ST7920_128X64_4X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_128x64_4x_sw_spi, sck, mosi, cs, U8G_PIN_NONE, reset)		// a0 = U8G_PIN_NONE
+      { }
+    U8GLIB_ST7920_128X64_4X(uint8_t cs, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_128x64_4x_hw_spi, cs, U8G_PIN_NONE, reset)			// a0 = U8G_PIN_NONE
+      { }
+    U8GLIB_ST7920_128X64_4X(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_128x64_4x_8bit, d0, d1, d2, d3, d4, d5, d6, d7, en, U8G_PIN_NONE, U8G_PIN_NONE, di, rw, reset)   // cs1 = cs2 = U8G_PIN_NONE
+      { }
+};
+
+
+
+class U8GLIB_ST7920_192X32 : public U8GLIB  // OBSOLETE, use U8GLIB_ST7920_192X32_1X instead
+{ 
+  public:
+    U8GLIB_ST7920_192X32(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_192x32_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_ST7920_192X32(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_192x32_hw_spi, cs, a0, reset)
+      { }
+    U8GLIB_ST7920_192X32(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t cs1, uint8_t cs2, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_192x32_8bit, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, cs2, di, rw, reset)
+      { }
+};
+
+class U8GLIB_ST7920_192X32_1X : public U8GLIB 
+{
+  public:
+    U8GLIB_ST7920_192X32_1X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_192x32_sw_spi, sck, mosi, cs, U8G_PIN_NONE, reset)		// a0 = U8G_PIN_NONE
+      { }
+    U8GLIB_ST7920_192X32_1X(uint8_t cs, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_192x32_hw_spi, cs, U8G_PIN_NONE, reset)			// a0 = U8G_PIN_NONE
+      { }
+    U8GLIB_ST7920_192X32_1X(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_192x32_8bit, d0, d1, d2, d3, d4, d5, d6, d7, en, U8G_PIN_NONE, U8G_PIN_NONE, di, rw, reset)  // cs1 = cs2 = U8G_PIN_NONE
+      { }
+};
+
+class U8GLIB_ST7920_192X32_4X : public U8GLIB 
+{
+  public:
+    U8GLIB_ST7920_192X32_4X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_192x32_4x_sw_spi, sck, mosi, cs, U8G_PIN_NONE, reset)		// a0 = U8G_PIN_NONE
+      { }
+    U8GLIB_ST7920_192X32_4X(uint8_t cs, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_192x32_4x_hw_spi, cs, U8G_PIN_NONE, reset)			// a0 = U8G_PIN_NONE
+      { }
+    U8GLIB_ST7920_192X32_4X(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_192x32_4x_8bit, d0, d1, d2, d3, d4, d5, d6, d7, en, U8G_PIN_NONE, U8G_PIN_NONE, di, rw, reset)   // cs1 = cs2 = U8G_PIN_NONE
+      { }
+};
+
+
+class U8GLIB_ST7920_202X32 : public U8GLIB 
+{
+  public:
+    U8GLIB_ST7920_202X32(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_202x32_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_ST7920_202X32(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_202x32_hw_spi, cs, a0, reset)
+      { }
+    U8GLIB_ST7920_202X32(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t cs1, uint8_t cs2, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_202x32_8bit, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, cs2, di, rw, reset)
+      { }
+};
+
+class U8GLIB_ST7920_202X32_1X : public U8GLIB 
+{
+  public:
+    U8GLIB_ST7920_202X32_1X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_202x32_sw_spi, sck, mosi, cs, U8G_PIN_NONE, reset)		// a0 = U8G_PIN_NONE
+      { }
+    U8GLIB_ST7920_202X32_1X(uint8_t cs, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_202x32_hw_spi, cs, U8G_PIN_NONE, reset)			// a0 = U8G_PIN_NONE
+      { }
+    U8GLIB_ST7920_202X32_1X(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_202x32_8bit, d0, d1, d2, d3, d4, d5, d6, d7, en, U8G_PIN_NONE, U8G_PIN_NONE, di, rw, reset)  // cs1 = cs2 = U8G_PIN_NONE
+      { }
+};
+
+class U8GLIB_ST7920_202X32_4X : public U8GLIB 
+{
+  public:
+    U8GLIB_ST7920_202X32_4X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_202x32_4x_sw_spi, sck, mosi, cs, U8G_PIN_NONE, reset)		// a0 = U8G_PIN_NONE
+      { }
+    U8GLIB_ST7920_202X32_4X(uint8_t cs, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_202x32_4x_hw_spi, cs, U8G_PIN_NONE, reset)			// a0 = U8G_PIN_NONE
+      { }
+    U8GLIB_ST7920_202X32_4X(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7920_202x32_4x_8bit, d0, d1, d2, d3, d4, d5, d6, d7, en, U8G_PIN_NONE, U8G_PIN_NONE, di, rw, reset)   // cs1 = cs2 = U8G_PIN_NONE
+      { }
+};
+
+
+class U8GLIB_LC7981_160X80 : public U8GLIB 
+{
+  public:
+    U8GLIB_LC7981_160X80(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t cs1, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_lc7981_160x80_8bit, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, U8G_PIN_NONE, di, rw, reset)
+      { }
+};
+
+class U8GLIB_LC7981_240X64 : public U8GLIB 
+{
+  public:
+    U8GLIB_LC7981_240X64(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t cs1, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_lc7981_240x64_8bit, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, U8G_PIN_NONE, di, rw, reset)
+      { }
+};
+
+class U8GLIB_LC7981_240X128 : public U8GLIB 
+{
+  public:
+    U8GLIB_LC7981_240X128(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t cs1, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_lc7981_240x128_8bit, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, U8G_PIN_NONE, di, rw, reset)
+      { }
+};
+
+// 16 bit mode required: Remove comment from "#define U8G_16BIT 1" in utility/u8g.h
+class U8GLIB_LC7981_320X64 : public U8GLIB 
+{
+  public:
+    U8GLIB_LC7981_320X64(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t cs1, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_lc7981_320x64_8bit, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, U8G_PIN_NONE, di, rw, reset)
+      { }
+};
+
+
+
+class U8GLIB_DOGXL160_BW : public U8GLIB 
+{
+  public:
+    U8GLIB_DOGXL160_BW(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_uc1610_dogxl160_bw_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_DOGXL160_BW(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_uc1610_dogxl160_bw_hw_spi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_DOGXL160_GR : public U8GLIB 
+{
+  public:
+    U8GLIB_DOGXL160_GR(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_uc1610_dogxl160_gr_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_DOGXL160_GR(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_uc1610_dogxl160_gr_hw_spi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_DOGXL160_2X_BW : public U8GLIB 
+{
+  public:
+    U8GLIB_DOGXL160_2X_BW(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_uc1610_dogxl160_2x_bw_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_DOGXL160_2X_BW(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_uc1610_dogxl160_2x_bw_hw_spi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_DOGXL160_2X_GR : public U8GLIB 
+{
+  public:
+    U8GLIB_DOGXL160_2X_GR(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_uc1610_dogxl160_2x_gr_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_DOGXL160_2X_GR(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_uc1610_dogxl160_2x_gr_hw_spi, cs, a0, reset)
+      { }
+};
+
+
+class U8GLIB_NHD27OLED_BW : public U8GLIB 
+{
+  public:
+    U8GLIB_NHD27OLED_BW(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1325_nhd27oled_bw_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_NHD27OLED_BW(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1325_nhd27oled_bw_hw_spi, cs, a0, reset)
+      { }
+    U8GLIB_NHD27OLED_BW(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t cs, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1325_nhd27oled_bw_parallel, d0, d1, d2, d3, d4, d5, d6, d7, U8G_PIN_NONE, cs, U8G_PIN_NONE, di, rw, reset)
+      { }
+};
+
+class U8GLIB_NHD27OLED_2X_BW : public U8GLIB 
+{
+  public:
+    U8GLIB_NHD27OLED_2X_BW(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1325_nhd27oled_2x_bw_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_NHD27OLED_2X_BW(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1325_nhd27oled_2x_bw_hw_spi, cs, a0, reset)
+      { }
+    U8GLIB_NHD27OLED_2X_BW(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t cs, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1325_nhd27oled_2x_bw_parallel, d0, d1, d2, d3, d4, d5, d6, d7, U8G_PIN_NONE, cs, U8G_PIN_NONE, di, rw, reset)
+      { }
+};
+
+class U8GLIB_NHD31OLED_BW : public U8GLIB 
+{
+  public:
+    U8GLIB_NHD31OLED_BW(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1322_nhd31oled_bw_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_NHD31OLED_BW(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1322_nhd31oled_bw_hw_spi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_NHD31OLED_2X_BW : public U8GLIB 
+{
+  public:
+    U8GLIB_NHD31OLED_2X_BW(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1322_nhd31oled_2x_bw_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_NHD31OLED_2X_BW(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1322_nhd31oled_2x_bw_hw_spi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_NHD31OLED_GR : public U8GLIB 
+{
+  public:
+    U8GLIB_NHD31OLED_GR(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1322_nhd31oled_gr_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_NHD31OLED_GR(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1322_nhd31oled_gr_hw_spi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_NHD31OLED_2X_GR : public U8GLIB 
+{
+  public:
+    U8GLIB_NHD31OLED_2X_GR(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1322_nhd31oled_2x_gr_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_NHD31OLED_2X_GR(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1322_nhd31oled_2x_gr_hw_spi, cs, a0, reset)
+      { }
+};
+
+
+class U8GLIB_SSD1306_128X64 : public U8GLIB 
+{
+  public:
+    U8GLIB_SSD1306_128X64(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1306_128x64_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_SSD1306_128X64(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1306_128x64_hw_spi, cs, a0, reset)
+      { }
+    U8GLIB_SSD1306_128X64(uint8_t options = U8G_I2C_OPT_NONE) 
+      : U8GLIB(&u8g_dev_ssd1306_128x64_i2c, options)
+      { }
+      
+};
+
+class U8GLIB_SSD1309_128X64 : public U8GLIB 
+{
+  public:
+    U8GLIB_SSD1309_128X64(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1309_128x64_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_SSD1309_128X64(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1309_128x64_hw_spi, cs, a0, reset)
+      { }
+    U8GLIB_SSD1309_128X64(uint8_t options = U8G_I2C_OPT_NONE) 
+      : U8GLIB(&u8g_dev_ssd1309_128x64_i2c, options)
+      { }
+      
+};
+
+class U8GLIB_SSD1306_128X32 : public U8GLIB 
+{
+  public:
+    U8GLIB_SSD1306_128X32(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1306_128x32_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_SSD1306_128X32(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1306_128x32_hw_spi, cs, a0, reset)
+      { }
+    U8GLIB_SSD1306_128X32(uint8_t options = U8G_I2C_OPT_NONE) 
+      : U8GLIB(&u8g_dev_ssd1306_128x32_i2c, options)
+      { }
+      
+};
+
+
+class U8GLIB_NHD27OLED_GR : public U8GLIB 
+{
+  public:
+    U8GLIB_NHD27OLED_GR(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1325_nhd27oled_gr_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_NHD27OLED_GR(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1325_nhd27oled_gr_hw_spi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_NHD27OLED_2X_GR : public U8GLIB 
+{
+  public:
+    U8GLIB_NHD27OLED_2X_GR(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1325_nhd27oled_2x_gr_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_NHD27OLED_2X_GR(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1325_nhd27oled_2x_gr_hw_spi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_SSD1327_96X96_GR : public U8GLIB 
+{
+  public:
+    U8GLIB_SSD1327_96X96_GR(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1327_96x96_gr_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_SSD1327_96X96_GR(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1327_96x96_gr_hw_spi, cs, a0, reset)
+      { }
+    U8GLIB_SSD1327_96X96_GR(uint8_t options = U8G_I2C_OPT_NONE) 
+      : U8GLIB(&u8g_dev_ssd1327_96x96_gr_i2c, options)
+      { }
+};
+
+class U8GLIB_SSD1327_96X96_2X_GR : public U8GLIB 
+{
+  public:
+    U8GLIB_SSD1327_96X96_2X_GR(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1327_96x96_2x_gr_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_SSD1327_96X96_2X_GR(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ssd1327_96x96_2x_gr_hw_spi, cs, a0, reset)
+      { }
+    U8GLIB_SSD1327_96X96_2X_GR(uint8_t options = U8G_I2C_OPT_NONE) 
+      : U8GLIB(&u8g_dev_ssd1327_96x96_2x_gr_i2c, options)
+      { }
+};
+
+class U8GLIB_PCF8812 : public U8GLIB 
+{
+  public:
+    U8GLIB_PCF8812(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_pcf8812_96x65_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_PCD8544 : public U8GLIB 
+{
+  public:
+    U8GLIB_PCD8544(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_pcd8544_84x48_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_TLS8204_84X48 : public U8GLIB 
+{
+  public:
+    U8GLIB_TLS8204_84X48(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_tls8204_84x48_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+};
+
+class U8GLIB_KS0108_128 : public U8GLIB 
+{
+  public:
+    U8GLIB_KS0108_128(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t cs1, uint8_t cs2, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ks0108_128x64_fast, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, cs2, di, rw, reset)
+      { }
+};
+
+class U8GLIB_SBN1661_122X32 : public U8GLIB 
+{
+  public:
+    U8GLIB_SBN1661_122X32(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t cs1, uint8_t cs2, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_sbn1661_122x32, d0, d1, d2, d3, d4, d5, d6, d7, U8G_PIN_NONE, cs1, cs2, di, rw, reset)
+      { }
+};
+
+class U8GLIB_T6963_240X128 : public U8GLIB 
+{
+  public:
+    U8GLIB_T6963_240X128(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t cs, uint8_t a0, uint8_t wr, uint8_t rd, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_t6963_240x128_8bit, d0, d1, d2, d3, d4, d5, d6, d7, cs, a0, wr, rd, reset)
+      { }
+};
+
+class U8GLIB_T6963_240X64 : public U8GLIB 
+{
+  public:
+    U8GLIB_T6963_240X64(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t cs, uint8_t a0, uint8_t wr, uint8_t rd, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_t6963_240x64_8bit, d0, d1, d2, d3, d4, d5, d6, d7, cs, a0, wr, rd, reset)
+      { }
+};
+
+class U8GLIB_T6963_128X64 : public U8GLIB 
+{
+  public:
+    U8GLIB_T6963_128X64(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t cs, uint8_t a0, uint8_t wr, uint8_t rd, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_t6963_128x64_8bit, d0, d1, d2, d3, d4, d5, d6, d7, cs, a0, wr, rd, reset)
+      { }
+};
+
+
+class U8GLIB_ST7687_C144MVGD: public U8GLIB 
+{
+  public:
+    U8GLIB_ST7687_C144MVGD(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_st7687_c144mvgd_sw_spi, sck, mosi, cs, a0, reset)
+      { }
+    U8GLIB_ST7687_C144MVGD(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t cs, uint8_t a0, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ks0108_128x64_fast, d0, d1, d2, d3, d4, d5, d6, d7, en, cs, U8G_PIN_NONE, a0, rw, reset)
+      { }
+};
+
+class U8GLIB_ILI9325D_320x240 : public U8GLIB 
+{
+  public:
+    /*
+    U8GLIB_ILI9325D_320x240(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, 
+        uint8_t en, uint8_t cs1, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      : U8GLIB(&u8g_dev_ili9325d_320x240_8bit, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, U8G_PIN_NONE, di, rw, reset)
+      { }
+  */
+    U8GLIB_ILI9325D_320x240( uint8_t en, uint8_t cs1, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE) 
+      { init8BitFixedPort(&u8g_dev_ili9325d_320x240_8bit, en, cs1, di, rw, reset); }
+};
+
+class U8GLIB_FLIPDISC_2X7 : public U8GLIB 
+{
+  public:
+    U8GLIB_FLIPDISC_2X7(void) : U8GLIB(&u8g_dev_flipdisc_2x7)
+      {  }
+};
+
+class U8GLIB_VS : public U8GLIB 
+{
+  public:
+    U8GLIB_VS(void) : U8GLIB(&u8g_dev_vs)
+      {  }
+};
+
+
+#endif /* _CPP_U8GLIB */

ArduinoAddons/Arduino_0.xx/libraries/U8glib/examples/Bitmap/Bitmap.pde

@@ -0,0 +1,130 @@
+/*
+
+  Bitmap.pde
+  
+  Show simple bitmap
+
+  >>> Before compiling: Please remove comment from the constructor of the 
+  >>> connected graphics display (see below).
+
+  Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+*/
+
+
+#include "U8glib.h"
+
+// setup u8g object, please remove comment from one of the following constructor calls
+// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
+
+//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGS102 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM132 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM128 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10);	// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
+//U8GLIB_ST7920_192X32_4X u8g(10);		// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
+//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_LM6059 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_LM6063 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_BW u8g(10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); 		// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
+//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 );  			// 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
+//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
+//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X64 u8g(10, 9);		// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X32 u8g(10, 9);             // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+
+const uint8_t rook_bitmap[] PROGMEM = {
+  0x00,         // 00000000 
+  0x55,         // 01010101
+  0x7f,          // 01111111
+  0x3e,         // 00111110
+  0x3e,         // 00111110 
+  0x3e,         // 00111110
+  0x3e,         // 00111110 
+  0x7f           // 01111111
+};
+
+void draw(void) {
+  // graphic commands to redraw the complete screen should be placed here  
+  u8g.drawBitmapP( 0, 0, 1, 8, rook_bitmap);
+}
+
+void setup(void) {
+}
+
+void loop(void) {
+  // picture loop
+  u8g.firstPage();  
+  do {
+    draw();
+  } while( u8g.nextPage() );
+  
+  // rebuild the picture after some delay
+  delay(1000);
+}
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/examples/Chess/Chess.pde

@@ -0,0 +1,180 @@
+/*
+
+  Chess.pde
+  
+  Little Rook Chess
+
+  >>> Before compiling: Please remove comment from the constructor of the 
+  >>> connected graphics display (see below).
+  
+  Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+
+*/
+
+
+#include "U8glib.h"
+
+// setup u8g object, please remove comment from one of the following constructor calls
+// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
+
+//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGS102 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM132 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM128 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10);	// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
+//U8GLIB_ST7920_192X32_4X u8g(10);		// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
+//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_LM6059 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_LM6063 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_BW u8g(10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); 		// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
+//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 );  			// 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
+//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
+//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X64 u8g(10, 9);		// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X32 u8g(10, 9);             // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+
+
+// DOGS102 shield configuration values
+uint8_t uiKeyPrev = 2;
+uint8_t uiKeyNext = 4;
+uint8_t uiKeySelect = 5;
+uint8_t uiKeyBack = 3;
+
+// DOGM128-Shield	 configuration values
+// DOGXL60-Shield configuration values
+//uint8_t uiKeyPrev = 7;
+//uint8_t uiKeyNext = 3;
+//uint8_t uiKeySelect = 2;
+//uint8_t uiKeyBack = 8;
+
+uint8_t uiKeyCodeFirst = CHESS_KEY_NONE;
+uint8_t uiKeyCodeSecond = CHESS_KEY_NONE;
+uint8_t uiKeyCode = CHESS_KEY_NONE;
+
+
+void uiSetup(void) {
+  // configure input keys 
+  
+  pinMode(uiKeyPrev, INPUT);           // set pin to input
+  digitalWrite(uiKeyPrev, HIGH);       // turn on pullup resistors
+  pinMode(uiKeyNext, INPUT);           // set pin to input
+  digitalWrite(uiKeyNext, HIGH);       // turn on pullup resistors
+  pinMode(uiKeySelect, INPUT);           // set pin to input
+  digitalWrite(uiKeySelect, HIGH);       // turn on pullup resistors
+  pinMode(uiKeyBack, INPUT);           // set pin to input
+  digitalWrite(uiKeyBack, HIGH);       // turn on pullup resistors
+}
+
+void uiStep(void)
+{
+  uiKeyCodeSecond = uiKeyCodeFirst;
+  if ( digitalRead(uiKeyPrev) == LOW )
+    uiKeyCodeFirst = CHESS_KEY_PREV;
+  else if ( digitalRead(uiKeyNext) == LOW )
+    uiKeyCodeFirst = CHESS_KEY_NEXT;
+  else if ( digitalRead(uiKeySelect) == LOW )
+    uiKeyCodeFirst = CHESS_KEY_SELECT;
+  else if ( digitalRead(uiKeyBack) == LOW )
+    uiKeyCodeFirst = CHESS_KEY_BACK;
+  else 
+    uiKeyCodeFirst = CHESS_KEY_NONE;
+  
+  if ( uiKeyCodeSecond == uiKeyCodeFirst )
+    uiKeyCode = uiKeyCodeFirst;
+  else
+    uiKeyCode = CHESS_KEY_NONE;
+}
+
+
+void setup() {
+  // rotate screen, if required
+  u8g.setRot180();
+  
+  uiSetup();
+  chess_Init(u8g.getU8g(), 0);
+}
+
+void loop() {  
+  uint8_t keyCode = CHESS_KEY_NONE;
+  
+  u8g.firstPage();
+  do {
+    chess_Draw();
+    uiStep();
+    if ( uiKeyCode != CHESS_KEY_NONE )
+      keyCode = uiKeyCode;
+  } while( u8g.nextPage() );
+  
+  u8g_Delay(10);
+  chess_Step(keyCode);
+  uiStep();
+  keyCode = uiKeyCode;
+}
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/examples/Console/Console.pde

@@ -0,0 +1,230 @@
+/*
+
+  Console.pde
+  
+  Read from serial monitor, output to display
+  
+  >>> Before compiling: Please remove comment from the constructor of the 
+  >>> connected graphics display (see below).
+  
+  Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+*/
+
+
+#include "U8glib.h"
+
+// setup u8g object, please remove comment from one of the following constructor calls
+// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
+
+//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGS102 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM132 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM128 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10);	// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
+//U8GLIB_ST7920_192X32_4X u8g(10);		// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
+//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_LM6059 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_LM6063 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_BW u8g(10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); 		// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
+//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 );  			// 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
+//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
+//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X64 u8g(10, 9);		// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X32 u8g(10, 9);             // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+
+
+// setup input buffer
+#define LINE_MAX 30 
+uint8_t line_buf[LINE_MAX] = "U8GLIB Console";
+uint8_t line_pos = 0;
+
+// setup a text screen to support scrolling
+#define ROW_MAX 12
+
+
+uint8_t screen[ROW_MAX][LINE_MAX];
+uint8_t rows, cols;
+
+// line height, which matches the selected font (5x7)
+#define LINE_PIXEL_HEIGHT 7
+
+// clear entire screen, called during setup
+void clear_screen(void) {
+  uint8_t i, j;
+  for( i = 0; i < ROW_MAX; i++ )
+    for( j = 0; j < LINE_MAX; j++ )
+      screen[i][j] = 0;  
+}
+
+// append a line to the screen, scroll up
+void add_line_to_screen(void) {
+  uint8_t i, j;
+  for( j = 0; j < LINE_MAX; j++ )
+    for( i = 0; i < rows-1; i++ )
+      screen[i][j] = screen[i+1][j];
+  
+  for( j = 0; j < LINE_MAX; j++ )
+    screen[rows-1][j] = line_buf[j];
+}
+
+// U8GLIB draw procedure: output the screen
+void draw(void) {
+  uint8_t i, y;
+  // graphic commands to redraw the complete screen are placed here    
+  y = 0;       // reference is the top left -1 position of the string
+  y--;           // correct the -1 position of the drawStr 
+  for( i = 0; i < rows; i++ )
+  {
+    u8g.drawStr( 0, y, (char *)(screen[i]));
+    y += u8g.getFontLineSpacing();
+  }
+}
+
+void exec_line(void) {
+  // echo line to the serial monitor
+  Serial.println((const char *)line_buf);
+  
+  // add the line to the screen
+  add_line_to_screen();
+  
+  // U8GLIB picture loop
+  u8g.firstPage();  
+  do {
+    draw();
+  } while( u8g.nextPage() );
+}
+
+// clear current input buffer
+void reset_line(void) { 
+      line_pos = 0;
+      line_buf[line_pos] = '\0';  
+}
+
+// add a single character to the input buffer 
+void char_to_line(uint8_t c) {
+      line_buf[line_pos] = c;
+      line_pos++;
+      line_buf[line_pos] = '\0';  
+}
+
+// check serial in and handle the character
+void read_line(void) {
+  if ( Serial.available() )
+  {
+    uint8_t c;
+    c = Serial.read();
+    if ( line_pos >= cols-1 ) {
+      exec_line();
+      reset_line();
+      char_to_line(c);
+    } 
+    else if ( c == '\n' ) {
+      // ignore '\n' 
+    }
+    else if ( c == '\r' ) {
+      exec_line();
+      reset_line();
+    }
+    else {
+      char_to_line(c);
+    }
+  }
+}
+
+// Arduino master setup
+void setup(void) {
+  // set font for the console window
+  u8g.setFont(u8g_font_5x7);
+  //u8g.setFont(u8g_font_9x15);
+  
+  // set upper left position for the string draw procedure
+  u8g.setFontPosTop();
+  
+  // calculate the number of rows for the display
+  rows = u8g.getHeight() / u8g.getFontLineSpacing();
+  if ( rows > ROW_MAX )
+    rows = ROW_MAX; 
+  
+  // estimate the number of columns for the display
+  cols = u8g.getWidth() / u8g.getStrWidth("m");
+  if ( cols > LINE_MAX-1 )
+    cols = LINE_MAX-1; 
+  
+  clear_screen();               // clear screen
+  delay(1000);                  // do some delay
+  Serial.begin(9600);        // init serial
+  exec_line();                    // place the input buffer into the screen
+  reset_line();                   // clear input buffer
+}
+
+// Arduino main loop
+void loop(void) {
+  read_line();
+}
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/examples/F/F.pde

@@ -0,0 +1,139 @@
+/*
+
+  F.pde
+  
+  Example code for the F() macro.
+  
+  >>> This example requires Arduino 1.0 and above.
+  
+  >>> Before compiling: Please remove comment from the constructor of the 
+  >>> connected graphics display (see below).
+  
+  Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+*/
+
+
+#include "U8glib.h"
+
+// setup u8g object, please remove comment from one of the following constructor calls
+// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
+
+//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGS102 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM132 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM128 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10);	// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
+//U8GLIB_ST7920_192X32_4X u8g(10);		// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
+//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_LM6059 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_LM6063 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_BW u8g(10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); 		// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
+//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 );  			// 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
+//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
+//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X64 u8g(10, 9);		// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X32 u8g(10, 9);             // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+
+void draw(void) {
+  // graphic commands to redraw the complete screen should be placed here  
+  
+  // assign default font
+  u8g.setFont(u8g_font_unifont);
+  
+  // pointer to strings in flash memory can be stored in a special type
+  const __FlashStringHelper *flash_ptr;
+  
+  // the result of the F() macro can be assigned to this pointer
+  flash_ptr = F("Hello World!");
+  
+  // this pointer can be used as argument to the draw procedures
+  u8g.drawStr( 0+1, 20+1, flash_ptr);
+  u8g.drawStr( 0, 20, flash_ptr);
+  
+  // of course, the F() macro can be used directly
+  u8g.drawStr( 0, 40, F("PROGMEM"));
+
+}
+
+void setup(void) {
+  // flip screen, if required
+  // u8g.setRot180();
+}
+
+void loop(void) {
+  // picture loop
+  u8g.firstPage();  
+  do {
+    draw();
+  } while( u8g.nextPage() );
+  
+  // rebuild the picture after some delay
+  delay(500);
+}
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/examples/GraphicsTest/GraphicsTest.pde

@@ -0,0 +1,223 @@
+/*
+
+  GraphicsTest.pde
+  
+  >>> Before compiling: Please remove comment from the constructor of the 
+  >>> connected graphics display (see below).
+  
+  Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+
+
+*/
+
+
+#include "U8glib.h"
+
+// setup u8g object, please remove comment from one of the following constructor calls
+// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
+
+//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGS102 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM132 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM128 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10);	// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
+//U8GLIB_ST7920_192X32_4X u8g(10);		// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
+//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_LM6059 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_LM6063 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_BW u8g(10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); 		// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
+//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 );  			// 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
+//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
+//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X64 u8g(10, 9);		// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X32 u8g(10, 9);             // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+
+void u8g_prepare(void) {
+  u8g.setFont(u8g_font_6x10);
+  u8g.setFontRefHeightExtendedText();
+  u8g.setDefaultForegroundColor();
+  u8g.setFontPosTop();
+}
+
+void u8g_box_frame(uint8_t a) {
+  u8g.drawStr( 0, 0, "drawBox");
+  u8g.drawBox(5,10,20,10);
+  u8g.drawBox(10+a,15,30,7);
+  u8g.drawStr( 0, 30, "drawFrame");
+  u8g.drawFrame(5,10+30,20,10);
+  u8g.drawFrame(10+a,15+30,30,7);
+}
+
+void u8g_disc_circle(uint8_t a) {
+  u8g.drawStr( 0, 0, "drawDisc");
+  u8g.drawDisc(10,18,9);
+  u8g.drawDisc(24+a,16,7);
+  u8g.drawStr( 0, 30, "drawCircle");
+  u8g.drawCircle(10,18+30,9);
+  u8g.drawCircle(24+a,16+30,7);
+}
+
+void u8g_r_frame(uint8_t a) {
+  u8g.drawStr( 0, 0, "drawRFrame/Box");
+  u8g.drawRFrame(5, 10,40,30, a+1);
+  u8g.drawRBox(50, 10,25,40, a+1);
+}
+
+void u8g_string(uint8_t a) {
+  u8g.drawStr(30+a,31, " 0");
+  u8g.drawStr90(30,31+a, " 90");
+  u8g.drawStr180(30-a,31, " 180");
+  u8g.drawStr270(30,31-a, " 270");
+}
+
+void u8g_line(uint8_t a) {
+  u8g.drawStr( 0, 0, "drawLine");
+  u8g.drawLine(7+a, 10, 40, 55);
+  u8g.drawLine(7+a*2, 10, 60, 55);
+  u8g.drawLine(7+a*3, 10, 80, 55);
+  u8g.drawLine(7+a*4, 10, 100, 55);
+}
+
+void u8g_ascii_1() {
+  char s[2] = " ";
+  uint8_t x, y;
+  u8g.drawStr( 0, 0, "ASCII page 1");
+  for( y = 0; y < 6; y++ ) {
+    for( x = 0; x < 16; x++ ) {
+      s[0] = y*16 + x + 32;
+      u8g.drawStr(x*7, y*10+10, s);
+    }
+  }
+}
+
+void u8g_ascii_2() {
+  char s[2] = " ";
+  uint8_t x, y;
+  u8g.drawStr( 0, 0, "ASCII page 2");
+  for( y = 0; y < 6; y++ ) {
+    for( x = 0; x < 16; x++ ) {
+      s[0] = y*16 + x + 160;
+      u8g.drawStr(x*7, y*10+10, s);
+    }
+  }
+}
+
+
+uint8_t draw_state = 0;
+
+void draw(void) {
+  u8g_prepare();
+  switch(draw_state >> 3) {
+    case 0: u8g_box_frame(draw_state&7); break;
+    case 1: u8g_disc_circle(draw_state&7); break;
+    case 2: u8g_r_frame(draw_state&7); break;
+    case 3: u8g_string(draw_state&7); break;
+    case 4: u8g_line(draw_state&7); break;
+    case 5: u8g_ascii_1(); break;
+    case 6: u8g_ascii_2(); break;
+  }
+}
+
+void setup(void) {
+
+  // flip screen, if required
+  //u8g.setRot180();
+
+  // assign default color value
+  if ( u8g.getMode() == U8G_MODE_R3G3B2 ) 
+    u8g.setColorIndex(255);     // white
+  else if ( u8g.getMode() == U8G_MODE_GRAY2BIT )
+    u8g.setColorIndex(3);         // max intensity
+  else if ( u8g.getMode() == U8G_MODE_BW )
+    u8g.setColorIndex(1);         // pixel on
+  
+  //u8g.setContrast(0x30);
+  
+  pinMode(13, OUTPUT);           
+  digitalWrite(13, HIGH);  
+}
+
+void loop(void) {
+  
+  // picture loop  
+  u8g.firstPage();  
+  do {
+    draw();
+  } while( u8g.nextPage() );
+  
+  // increase the state
+  draw_state++;
+  if ( draw_state >= 7*8 )
+    draw_state = 0;
+  
+  // rebuild the picture after some delay
+  delay(150);
+
+}
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/examples/HelloWorld/HelloWorld.pde

@@ -0,0 +1,136 @@
+/*
+
+  HelloWorld.pde
+  
+  "Hello World!" example code.
+  
+  >>> Before compiling: Please remove comment from the constructor of the 
+  >>> connected graphics display (see below).
+  
+  Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+*/
+
+
+#include "U8glib.h"
+
+// setup u8g object, please remove comment from one of the following constructor calls
+// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
+
+//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGS102 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM132 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM128 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10);	// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
+//U8GLIB_ST7920_192X32_4X u8g(10);		// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
+//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_LM6059 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_LM6063 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_BW u8g(10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); 		// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
+//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 );  			// 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
+//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
+//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X64 u8g(10, 9);		// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X32 u8g(10, 9);             // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+
+
+void draw(void) {
+  // graphic commands to redraw the complete screen should be placed here  
+  u8g.setFont(u8g_font_unifont);
+  //u8g.setFont(u8g_font_osb21);
+  u8g.drawStr( 0, 22, "Hello World!");
+}
+
+void setup(void) {
+  
+  // flip screen, if required
+  // u8g.setRot180();
+  
+  // set SPI backup if required
+  //u8g.setHardwareBackup(u8g_backup_avr_spi);
+
+  // assign default color value
+  if ( u8g.getMode() == U8G_MODE_R3G3B2 ) 
+    u8g.setColorIndex(255);     // white
+  else if ( u8g.getMode() == U8G_MODE_GRAY2BIT )
+    u8g.setColorIndex(3);         // max intensity
+  else if ( u8g.getMode() == U8G_MODE_BW )
+    u8g.setColorIndex(1);         // pixel on
+}
+
+void loop(void) {
+  // picture loop
+  u8g.firstPage();  
+  do {
+    draw();
+  } while( u8g.nextPage() );
+  
+  // rebuild the picture after some delay
+  delay(500);
+}
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/examples/Menu/Menu.pde

@@ -0,0 +1,234 @@
+/*
+
+  Menu.pde
+  
+  Simple Menu Selection
+
+  >>> Before compiling: Please remove comment from the constructor of the 
+  >>> connected graphics display (see below).
+  
+  Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+
+*/
+
+
+#include "U8glib.h"
+
+// setup u8g object, please remove comment from one of the following constructor calls
+// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
+
+//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGS102 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM132 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM128 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10);	// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
+//U8GLIB_ST7920_192X32_4X u8g(10);		// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
+//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_LM6059 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_LM6063 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_BW u8g(10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); 		// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
+//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 );  			// 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
+//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
+//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X64 u8g(10, 9);		// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X32 u8g(10, 9);             // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+
+
+#define KEY_NONE 0
+#define KEY_PREV 1
+#define KEY_NEXT 2
+#define KEY_SELECT 3
+#define KEY_BACK 4
+
+// DOGS102 shield configuration values
+//uint8_t uiKeyPrev = 2;
+//uint8_t uiKeyNext = 4;
+//uint8_t uiKeySelect = 5;
+//uint8_t uiKeyBack = 3;
+
+// DOGM128-Shield	 configuration values
+// DOGXL60-Shield configuration values
+uint8_t uiKeyPrev = 7;
+uint8_t uiKeyNext = 3;
+uint8_t uiKeySelect = 2;
+uint8_t uiKeyBack = 8;
+
+uint8_t uiKeyCodeFirst = KEY_NONE;
+uint8_t uiKeyCodeSecond = KEY_NONE;
+uint8_t uiKeyCode = KEY_NONE;
+
+
+void uiSetup(void) {
+  // configure input keys 
+  
+  pinMode(uiKeyPrev, INPUT);           // set pin to input
+  digitalWrite(uiKeyPrev, HIGH);       // turn on pullup resistors
+  pinMode(uiKeyNext, INPUT);           // set pin to input
+  digitalWrite(uiKeyNext, HIGH);       // turn on pullup resistors
+  pinMode(uiKeySelect, INPUT);           // set pin to input
+  digitalWrite(uiKeySelect, HIGH);       // turn on pullup resistors
+  pinMode(uiKeyBack, INPUT);           // set pin to input
+  digitalWrite(uiKeyBack, HIGH);       // turn on pullup resistors
+}
+
+void uiStep(void) {
+  uiKeyCodeSecond = uiKeyCodeFirst;
+  if ( digitalRead(uiKeyPrev) == LOW )
+    uiKeyCodeFirst = KEY_PREV;
+  else if ( digitalRead(uiKeyNext) == LOW )
+    uiKeyCodeFirst = KEY_NEXT;
+  else if ( digitalRead(uiKeySelect) == LOW )
+    uiKeyCodeFirst = KEY_SELECT;
+  else if ( digitalRead(uiKeyBack) == LOW )
+    uiKeyCodeFirst = KEY_BACK;
+  else 
+    uiKeyCodeFirst = KEY_NONE;
+  
+  if ( uiKeyCodeSecond == uiKeyCodeFirst )
+    uiKeyCode = uiKeyCodeFirst;
+  else
+    uiKeyCode = KEY_NONE;
+}
+
+
+#define MENU_ITEMS 4
+char *menu_strings[MENU_ITEMS] = { "First Line", "Second Item", "3333333", "abcdefg" };
+
+uint8_t menu_current = 0;
+uint8_t menu_redraw_required = 0;
+uint8_t last_key_code = KEY_NONE;
+
+
+void drawMenu(void) {
+  uint8_t i, h;
+  u8g_uint_t w, d;
+
+  u8g.setFont(u8g_font_6x13);
+  u8g.setFontRefHeightText();
+  u8g.setFontPosTop();
+  
+  h = u8g.getFontAscent()-u8g.getFontDescent();
+  w = u8g.getWidth();
+  for( i = 0; i < MENU_ITEMS; i++ ) {
+    d = (w-u8g.getStrWidth(menu_strings[i]))/2;
+    u8g.setDefaultForegroundColor();
+    if ( i == menu_current ) {
+      u8g.drawBox(0, i*h+1, w, h);
+      u8g.setDefaultBackgroundColor();
+    }
+    u8g.drawStr(d, i*h, menu_strings[i]);
+  }
+}
+
+void updateMenu(void) {
+  if ( uiKeyCode != KEY_NONE && last_key_code == uiKeyCode ) {
+    return;
+  }
+  last_key_code = uiKeyCode;
+  
+  switch ( uiKeyCode ) {
+    case KEY_NEXT:
+      menu_current++;
+      if ( menu_current >= MENU_ITEMS )
+        menu_current = 0;
+      menu_redraw_required = 1;
+      break;
+    case KEY_PREV:
+      if ( menu_current == 0 )
+        menu_current = MENU_ITEMS;
+      menu_current--;
+      menu_redraw_required = 1;
+      break;
+  }
+}
+
+
+void setup() {
+  // rotate screen, if required
+  // u8g.setRot180();
+  
+  uiSetup();                                // setup key detection and debounce algorithm
+  menu_redraw_required = 1;     // force initial redraw
+}
+
+void loop() {  
+
+  uiStep();                                     // check for key press
+    
+  if (  menu_redraw_required != 0 ) {
+    u8g.firstPage();
+    do  {
+      drawMenu();
+    } while( u8g.nextPage() );
+    menu_redraw_required = 0;
+  }
+
+  updateMenu();                            // update menu bar
+  
+}

ArduinoAddons/Arduino_0.xx/libraries/U8glib/examples/PrintTest/PrintTest.pde

@@ -0,0 +1,124 @@
+/*
+
+  PrintTest.pde
+  
+  How to use the base class "Print"
+  
+  >>> Before compiling: Please remove comment from the constructor of the 
+  >>> connected graphics display (see below).
+  
+  Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+*/
+
+
+#include "U8glib.h"
+
+// setup u8g object, please remove comment from one of the following constructor calls
+// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
+
+//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGS102 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM132 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM128 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10);	// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
+//U8GLIB_ST7920_192X32_4X u8g(10);		// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
+//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_LM6059 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_LM6063 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_BW u8g(10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); 		// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
+//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 );  			// 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
+//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
+//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X64 u8g(10, 9);		// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X32 u8g(10, 9);             // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+
+void draw(void) {
+  // graphic commands to redraw the complete screen should be placed here  
+  u8g.setFont(u8g_font_unifont);
+  u8g.setPrintPos(0, 20); 
+  // call procedure from base class, http://arduino.cc/en/Serial/Print
+  u8g.print("Hello World!");
+}
+
+void setup(void) {
+  // flip screen, if required
+  // u8g.setRot180();
+}
+
+void loop(void) {
+  // picture loop
+  u8g.firstPage();  
+  do {
+    draw();
+  } while( u8g.nextPage() );
+  
+  // rebuild the picture after some delay
+  delay(500);
+}
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/examples/Rotation/Rotation.pde

@@ -0,0 +1,152 @@
+/*
+
+  HelloWorld.pde
+  
+  "Hello World!" example code.
+  
+  >>> Before compiling: Please remove comment from the constructor of the 
+  >>> connected graphics display (see below).
+  
+  Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+*/
+
+
+#include "U8glib.h"
+
+// setup u8g object, please remove comment from one of the following constructor calls
+// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
+
+//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGS102 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM132 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM128 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10);	// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
+//U8GLIB_ST7920_192X32_4X u8g(10);		// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
+//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_LM6059 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_LM6063 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_BW u8g(10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); 		// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
+//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 );  			// 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
+//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
+//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X64 u8g(10, 9);		// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X32 u8g(10, 9);             // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+
+uint8_t offset = 0;
+
+void draw(void) {
+  // graphic commands to redraw the complete screen should be placed here  
+  u8g.setFont(u8g_font_unifont);
+  u8g.drawStr( 0+0, 20+0, "Hello!");
+  u8g.drawStr( 0+2, 20+16, "Hello!");
+  
+  u8g.drawBox(0, 0, 3, 3);
+  u8g.drawBox(u8g.getWidth()-6, 0, 6, 6);
+  u8g.drawBox(u8g.getWidth()-9, u8g.getHeight()-9, 9, 9);
+  u8g.drawBox(0, u8g.getHeight()-12, 12, 12);  
+}
+
+void setup(void) {
+}
+
+
+void rotate(void) {
+  static  uint8_t dir = 0;
+  static  unsigned long next_rotation = 0;
+  
+  if ( next_rotation < millis() )
+  {
+    switch(dir) {
+      case 0: u8g.undoRotation(); break;
+      case 1: u8g.setRot90(); break;
+      case 2: u8g.setRot180(); break;
+      case 3: u8g.setRot270(); offset = ( offset + 1 ) & 0x0f; break;
+    }
+    
+    dir++;
+    dir &= 3;
+    next_rotation = millis();
+    next_rotation += 1000;
+  }
+}
+
+void loop(void) {
+  // screen rotation 
+  rotate();
+  
+  // picture loop
+  u8g.firstPage();  
+  do {
+    draw();
+  } while( u8g.nextPage() );
+  
+  // rebuild the picture after some delay
+  delay(100);
+}
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/examples/Scale/Scale.pde

@@ -0,0 +1,141 @@
+/*
+
+  HelloWorld.pde
+  
+  "Hello World!" example code.
+  
+  >>> Before compiling: Please remove comment from the constructor of the 
+  >>> connected graphics display (see below).
+  
+  Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+*/
+
+
+#include "U8glib.h"
+
+// setup u8g object, please remove comment from one of the following constructor calls
+// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
+
+//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGS102 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM132 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM128 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10);	// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
+//U8GLIB_ST7920_192X32_4X u8g(10);		// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
+//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_LM6059 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_LM6063 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_BW u8g(10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); 		// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
+//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 );  			// 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
+//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
+//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X64 u8g(10, 9);		// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X32 u8g(10, 9);             // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+
+
+void draw(void) {
+  // graphic commands to redraw the complete screen should be placed here  
+  u8g.setFont(u8g_font_unifont);
+  u8g.setFontPosTop();
+  u8g.drawStr(0, 1, "Hello");
+  u8g.drawHLine(0, 1+14, 40);
+  u8g.setScale2x2();					// Scale up all draw procedures
+  u8g.drawStr(0, 12, "Hello");			// actual display position is (0,24)
+  u8g.drawHLine(0, 12+14, 40);		// All other procedures are also affected
+  u8g.undoScale();					// IMPORTANT: Switch back to normal mode
+}
+
+void setup(void) {
+  
+  // flip screen, if required
+  u8g.setRot180();
+  
+  // set SPI backup if required
+  //u8g.setHardwareBackup(u8g_backup_avr_spi);
+
+  // assign default color value
+  if ( u8g.getMode() == U8G_MODE_R3G3B2 ) 
+    u8g.setColorIndex(255);     // white
+  else if ( u8g.getMode() == U8G_MODE_GRAY2BIT )
+    u8g.setColorIndex(3);         // max intensity
+  else if ( u8g.getMode() == U8G_MODE_BW )
+    u8g.setColorIndex(1);         // pixel on
+}
+
+void loop(void) {
+  // picture loop
+  u8g.firstPage();  
+  do {
+    draw();
+  } while( u8g.nextPage() );
+  
+  // rebuild the picture after some delay
+  delay(500);
+}
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/examples/TextRotX/TextRotX.pde

@@ -0,0 +1,154 @@
+/*
+
+  TextRotX.pde
+  
+  Text rotation example code.
+  
+  >>> Before compiling: Please remove comment from the constructor of the 
+  >>> connected graphics display (see below).
+  
+  Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+*/
+
+
+#include "U8glib.h"
+
+// setup u8g object, please remove comment from one of the following constructor calls
+// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
+
+//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGS102 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM132 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM128 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10);	// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
+//U8GLIB_ST7920_192X32_4X u8g(10);		// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
+//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_LM6059 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_LM6063 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_BW u8g(10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); 		// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
+//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 );  			// 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
+//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
+//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X64 u8g(10, 9);		// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X32 u8g(10, 9);             // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+
+// graphic commands to redraw the complete screen should be placed here  
+void draw(void) {
+  u8g_uint_t mx, my;
+  
+  mx = u8g.getWidth();
+  mx >>= 1;
+  
+  my = u8g.getHeight();
+  my >>= 1;
+  
+  u8g.drawStr( mx, my, "Ag");
+  u8g.drawStr90( mx, my, "Ag");
+  u8g.drawStr180( mx, my, "Ag");
+  u8g.drawStr270( mx, my, "Ag");
+}
+
+void setup(void) {
+  u8g.setFont(u8g_font_9x18);
+}
+
+void change_font_pos(void) {
+  static  uint8_t dir = 0;
+  static  unsigned long next = 0;
+
+  if ( next < millis() )
+  {
+    switch(dir) {
+      case 0: u8g.setFontPosBottom(); break;
+      case 1: u8g.setFontPosBaseline(); break;
+      case 2: u8g.setFontPosCenter(); break;
+      case 3: u8g.setFontPosTop(); break;
+    }
+    
+    dir++;
+    dir &= 3;
+    next = millis();
+    next += 1000;
+  }
+}
+
+void loop(void) {
+  // change the font position  
+  change_font_pos();
+  
+  // picture loop
+  u8g.firstPage();  
+  do {
+    draw();
+  } while( u8g.nextPage() );
+  
+  // rebuild the picture after some delay
+  delay(100);
+}
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/examples/U8gLogo/U8gLogo.pde

@@ -0,0 +1,179 @@
+/*
+
+  U8gLogo.pde
+  
+  Put the U8GLIB logo on the display.
+  
+  >>> Before compiling: Please remove comment from the constructor of the 
+  >>> connected graphics display (see below).
+  
+  Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+*/
+
+
+#include "U8glib.h"
+
+// setup u8g object, please remove comment from one of the following constructor calls
+// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
+
+//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGS102 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM132 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM128 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10);	// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
+//U8GLIB_ST7920_192X32_4X u8g(10);		// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
+//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_LM6059 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_LM6063 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_BW u8g(10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); 		// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
+//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 );  			// 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
+//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
+//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X64 u8g(10, 9);		// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X32 u8g(10, 9);             // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+
+
+void drawColorBox(void)
+{
+  u8g_uint_t w,h;
+  u8g_uint_t r, g, b;
+  
+  w = u8g.getWidth()/32;
+  h = u8g.getHeight()/8;
+  for( b = 0; b < 4; b++ )
+    for( g = 0; g < 8; g++ )
+      for( r = 0; r < 8; r++ )
+      {
+        u8g.setColorIndex((r<<5) |  (g<<2) | b );
+        u8g.drawBox(g*w + b*w*8, r*h, w, h);
+      }
+}
+
+void drawLogo(uint8_t d)
+{
+  u8g.setFont(u8g_font_gdr25r);
+  u8g.drawStr(0+d, 30+d, "U");
+  u8g.setFont(u8g_font_gdr30n);
+  u8g.drawStr90(23+d,10+d,"8");
+  u8g.setFont(u8g_font_gdr25r);
+  u8g.drawStr(53+d,30+d,"g");
+  
+  u8g.drawHLine(2+d, 35+d, 47);
+  u8g.drawVLine(45+d, 32+d, 12);
+}
+
+void drawURL(void)
+{
+  u8g.setFont(u8g_font_4x6);
+  if ( u8g.getHeight() < 59 )
+  {
+    u8g.drawStr(53,9,"code.google.com");
+    u8g.drawStr(77,18,"/p/u8glib");
+  }
+  else
+  {
+    u8g.drawStr(1,54,"code.google.com/p/u8glib");
+  }
+}
+
+
+void draw(void) {
+  if ( u8g.getMode() == U8G_MODE_R3G3B2 ) {
+    drawColorBox();
+  }
+  u8g.setColorIndex(1);
+  if ( U8G_MODE_GET_BITS_PER_PIXEL(u8g.getMode()) > 1 ) {
+    drawLogo(2);
+    u8g.setColorIndex(2);
+    drawLogo(1);
+    u8g.setColorIndex(3);
+  }
+  drawLogo(0);
+  drawURL();
+  
+}
+
+void setup(void) {
+  // flip screen, if required
+  //u8g.setRot180();
+}
+
+void loop(void) {
+  
+  // picture loop
+  u8g.firstPage();  
+  do {
+    draw();
+  u8g.setColorIndex(1);
+  } while( u8g.nextPage() );
+  
+  // rebuild the picture after some delay
+  delay(200);  
+}
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/examples/XBM/XBM.pde

@@ -0,0 +1,136 @@
+/*
+
+  XBM.pde
+  
+  drawXBM example code.
+  
+  >>> Before compiling: Please remove comment from the constructor of the 
+  >>> connected graphics display (see below).
+  
+  Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+*/
+
+
+#include "U8glib.h"
+
+// setup u8g object, please remove comment from one of the following constructor calls
+// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
+
+//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGS102 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM132 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGM128 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10);	// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
+//U8GLIB_ST7920_192X32_4X u8g(10);		// SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
+//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16);   // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
+//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17);	// SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
+//U8GLIB_LM6059 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_LM6063 u8g(13, 11, 10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_BW u8g(10, 9);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8);		// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
+//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); 		// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
+//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7,  18, 14, 15, 17, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
+//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 );  			// 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
+//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); 	// 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
+//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X64 u8g(10, 9);		// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9);	// SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1306_128X32 u8g(10, 9);             // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE);	// HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are  SCK = 13 and MOSI = 11)
+//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
+//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE);	// I2C
+//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
+//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
+
+#define u8g_logo_width 38
+#define u8g_logo_height 24
+//static unsigned char u8g_logo_bits[] = {
+static unsigned char u8g_logo_bits[] U8G_PROGMEM = {
+   0xff, 0xff, 0xff, 0xff, 0x3f, 0xff, 0xff, 0xff, 0xff, 0x3f, 0xe0, 0xe0,
+   0xff, 0xff, 0x3f, 0xe3, 0xe1, 0xff, 0xff, 0x3f, 0xf3, 0xf1, 0xff, 0xff,
+   0x3f, 0xf3, 0xf1, 0xfe, 0xbf, 0x37, 0xf3, 0x11, 0x1c, 0x1f, 0x30, 0xf3,
+   0x01, 0x08, 0x8c, 0x20, 0xf3, 0x01, 0x00, 0xc0, 0x39, 0xf3, 0x81, 0xc7,
+   0xc1, 0x39, 0xf3, 0xc1, 0xc7, 0xc9, 0x38, 0xf3, 0xc1, 0xc3, 0x19, 0x3c,
+   0xe3, 0x89, 0x01, 0x98, 0x3f, 0xc7, 0x18, 0x00, 0x08, 0x3e, 0x0f, 0x3c,
+   0x70, 0x1c, 0x30, 0x3f, 0xff, 0xfc, 0x87, 0x31, 0xff, 0xff, 0xbf, 0xc7,
+   0x23, 0x01, 0x00, 0x00, 0xc6, 0x23, 0x03, 0x00, 0x00, 0x0e, 0x30, 0xff,
+   0xff, 0x3f, 0x1f, 0x3c, 0xff, 0xff, 0x3f, 0xff, 0x3f, 0xff, 0xff, 0x3f,
+   0xff, 0x3f, 0xff, 0xff, 0xff, 0xff, 0x3f, 0xff, 0xff, 0xff, 0xff, 0x3f };
+
+void draw(void) {
+  // graphic commands to redraw the complete screen should be placed here  
+  u8g.drawXBMP( 0, 0, u8g_logo_width, u8g_logo_height, u8g_logo_bits);
+}
+
+void setup(void) {
+  // flip screen, if required
+  // u8g.setRot180();
+}
+
+void loop(void) {
+  // picture loop
+  u8g.firstPage();  
+  do {
+    draw();
+  } while( u8g.nextPage() );
+  
+  // rebuild the picture after some delay
+  delay(500);
+}
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/license.txt

@@ -0,0 +1,80 @@
+
+The U8glib code (http://code.google.com/p/u8glib/) is licensed under the terms of 
+the new-bsd license (two-clause bsd license).
+See also: http://www.opensource.org/licenses/bsd-license.php
+
+The repository and optionally the releases contain icons, which are
+derived from the WPZOOM Developer Icon Set:
+http://www.wpzoom.com/wpzoom/new-freebie-wpzoom-developer-icon-set-154-free-icons/
+WPZOOM Developer Icon Set by WPZOOM is licensed under a Creative Commons 
+Attribution-ShareAlike 3.0 Unported License.
+
+Fonts are licensed under different conditions.
+See http://code.google.com/p/u8glib/wiki/fontgroup for
+detailed information on the licensing conditions for each font.
+
+============ X11 Fonts COUR, HELV, NCEN, TIM, SYMB ============
+
+For fonts derived from the following files, the license below applies.
+COURB08.BDF COURB10.BDF COURB12.BDF COURB14.BDF COURB18.BDF 
+COURB24.BDF COURR08.BDF COURR10.BDF COURR12.BDF COURR14.BDF 
+COURR18.BDF COURR24.BDF HELVB08.BDF HELVB10.BDF HELVB12.BDF HELVB14.BDF 
+HELVB18.BDF HELVB24.BDF HELVR08.BDF HELVR10.BDF HELVR12.BDF HELVR14.BDF 
+HELVR18.BDF HELVR24.BDF NCENB08.BDF NCENB10.BDF NCENB12.BDF 
+NCENB14.BDF NCENB18.BDF NCENB24.BDF NCENR08.BDF NCENR10.BDF 
+NCENR12.BDF NCENR14.BDF NCENR18.BDF NCENR24.BDF SYMB08.BDF SYMB10.BDF 
+SYMB12.BDF SYMB14.BDF SYMB18.BDF SYMB24.BDF TIMB08.BDF TIMB10.BDF 
+TIMB12.BDF TIMB14.BDF TIMB18.BDF TIMB24.BDF TIMR08.BDF TIMR10.BDF 
+TIMR12.BDF TIMR14.BDF TIMR18.BDF TIMR24.BDF 
+
+Copyright 1984-1989, 1994 Adobe Systems Incorporated.
+Copyright 1988, 1994 Digital Equipment Corporation.
+
+Adobe is a trademark of Adobe Systems Incorporated which may be
+registered in certain jurisdictions.
+Permission to use these trademarks is hereby granted only in
+association with the images described in this file.
+
+Permission to use, copy, modify, distribute and sell this software
+and its documentation for any purpose and without fee is hereby
+granted, provided that the above copyright notices appear in all
+copies and that both those copyright notices and this permission
+notice appear in supporting documentation, and that the names of
+Adobe Systems and Digital Equipment Corporation not be used in
+advertising or publicity pertaining to distribution of the software
+without specific, written prior permission.  Adobe Systems and
+Digital Equipment Corporation make no representations about the
+suitability of this software for any purpose.  It is provided "as
+is" without express or implied warranty.
+
+
+============ BSD License for U8glib Code ============
+
+Universal 8bit Graphics Library (http://code.google.com/p/u8glib/)
+
+Copyright (c) 2011, olikraus@gmail.com
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this list 
+  of conditions and the following disclaimer.
+  
+* Redistributions in binary form must reproduce the above copyright notice, this 
+  list of conditions and the following disclaimer in the documentation and/or other 
+  materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_bitmap.c

@@ -0,0 +1,177 @@
+/*
+
+  u8g_bitmap.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+
+*/
+
+#include "u8g.h"
+
+void u8g_DrawHBitmap(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t cnt, const uint8_t *bitmap)
+{
+  while( cnt > 0 )
+  {
+    u8g_Draw8Pixel(u8g, x, y, 0, *bitmap);
+    bitmap++;
+    cnt--;
+    x+=8;
+  }
+}
+
+void u8g_DrawBitmap(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t cnt, u8g_uint_t h, const uint8_t *bitmap)
+{
+  if ( u8g_IsBBXIntersection(u8g, x, y, cnt*8, h) == 0 )
+    return;
+  while( h > 0 )
+  {
+    u8g_DrawHBitmap(u8g, x, y, cnt, bitmap);
+    bitmap += cnt;
+    y++;
+    h--;
+  }
+}
+
+
+void u8g_DrawHBitmapP(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t cnt, const u8g_pgm_uint8_t *bitmap)
+{
+  while( cnt > 0 )
+  {
+    u8g_Draw8Pixel(u8g, x, y, 0, u8g_pgm_read(bitmap));
+    bitmap++;
+    cnt--;
+    x+=8;
+  }
+}
+
+void u8g_DrawBitmapP(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t cnt, u8g_uint_t h, const u8g_pgm_uint8_t *bitmap)
+{
+  if ( u8g_IsBBXIntersection(u8g, x, y, cnt*8, h) == 0 )
+    return;
+  while( h > 0 )
+  {
+    u8g_DrawHBitmapP(u8g, x, y, cnt, bitmap);
+    bitmap += cnt;
+    y++;
+    h--;
+  }
+}
+
+/*=========================================================================*/
+
+static void u8g_DrawHXBM(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t w, const uint8_t *bitmap)
+{
+  uint8_t d;
+  x+=7;
+  while( w >= 8 )
+  {
+    u8g_Draw8Pixel(u8g, x, y, 2, *bitmap);
+    bitmap++;
+    w-= 8;
+    x+=8;
+  }
+  if ( w > 0 )
+  {
+    d = *bitmap;
+    x -= 7;
+    do
+    {
+      if ( d & 1 )
+        u8g_DrawPixel(u8g, x, y);
+      x++;
+      w--;
+      d >>= 1;      
+    } while ( w > 0 );
+  }
+}
+
+void u8g_DrawXBM(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t w, u8g_uint_t h, const uint8_t *bitmap)
+{
+  u8g_uint_t b;
+  b = w;
+  b += 7;
+  b >>= 3;
+  
+  if ( u8g_IsBBXIntersection(u8g, x, y, w, h) == 0 )
+    return;
+  
+  while( h > 0 )
+  {
+    u8g_DrawHXBM(u8g, x, y, w, bitmap);
+    bitmap += b;
+    y++;
+    h--;
+  }
+}
+
+static void u8g_DrawHXBMP(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t w, const u8g_pgm_uint8_t *bitmap)
+{
+  uint8_t d;
+  x+=7;
+  while( w >= 8 )
+  {
+    u8g_Draw8Pixel(u8g, x, y, 2, u8g_pgm_read(bitmap));
+    bitmap++;
+    w-= 8;
+    x+=8;
+  }
+  if ( w > 0 )
+  {
+    d = u8g_pgm_read(bitmap);
+    x -= 7;
+    do
+    {
+      if ( d & 1 )
+        u8g_DrawPixel(u8g, x, y);
+      x++;
+      w--;
+      d >>= 1;      
+    } while ( w > 0 );
+  }
+}
+
+void u8g_DrawXBMP(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t w, u8g_uint_t h, const u8g_pgm_uint8_t *bitmap)
+{
+  u8g_uint_t b;
+  b = w;
+  b += 7;
+  b >>= 3;
+  
+  if ( u8g_IsBBXIntersection(u8g, x, y, w, h) == 0 )
+    return;
+  while( h > 0 )
+  {
+    u8g_DrawHXBMP(u8g, x, y, w, bitmap);
+    bitmap += b;
+    y++;
+    h--;
+  }
+}

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_circle.c

@@ -0,0 +1,382 @@
+/*
+
+  u8g_circle.c
+
+  Utility to draw empty and filled circles.
+  
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, bjthom@gmail.com
+  u8g_DrawCircle & u8g_DrawDisc by olikraus@gmail.com
+  
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  Addition to the U8G Library 02/25/12
+  
+  
+*/
+
+#include "u8g.h"
+
+#ifdef OLD_CODE
+
+void circ_upperRight(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t x0, u8g_uint_t y0) {
+  u8g_DrawPixel(u8g, x0 + x, y0 - y);
+  u8g_DrawPixel(u8g, x0 + y, y0 - x);
+}
+		
+void circ_upperLeft(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t x0, u8g_uint_t y0) {
+  u8g_DrawPixel(u8g, x0 - x, y0 - y);
+  u8g_DrawPixel(u8g, x0 - y, y0 - x);
+}
+		
+void circ_lowerRight(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t x0, u8g_uint_t y0) {
+  u8g_DrawPixel(u8g, x0 + x, y0 + y);
+  u8g_DrawPixel(u8g, x0 + y, y0 + x);
+}
+		
+void circ_lowerLeft(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t x0, u8g_uint_t y0) {
+  u8g_DrawPixel(u8g, x0 - x, y0 + y);
+  u8g_DrawPixel(u8g, x0 - y, y0 + x);
+}
+			
+void circ_all(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t x0, u8g_uint_t y0) {
+  circ_upperRight(u8g, x, y, x0, y0);
+  circ_upperLeft(u8g, x, y, x0, y0);
+  circ_lowerRight(u8g, x, y, x0, y0);
+  circ_lowerLeft(u8g, x, y, x0, y0);
+}
+
+void u8g_DrawEmpCirc(u8g_t *u8g, u8g_uint_t x0, u8g_uint_t y0, u8g_uint_t rad, uint8_t option)
+{
+  if ( u8g_IsBBXIntersection(u8g, x0-rad-1, y0-rad-1, 2*rad+1, 2*rad+1) == 0)
+    return;
+
+  int f = 1 - rad;
+  int ddF_x = 1;
+  int ddF_y = -2*rad;
+  uint8_t x = 0;
+  uint8_t y = rad;
+
+  void ( *circ_util )(u8g_t *, u8g_uint_t, u8g_uint_t, u8g_uint_t, u8g_uint_t);
+  
+  switch (option)
+  {
+	case U8G_CIRC_UPPER_RIGHT:
+		u8g_DrawPixel(u8g, x0, y0 - rad);
+		u8g_DrawPixel(u8g, x0 + rad, y0);
+		circ_util = circ_upperRight;
+		break;
+	case U8G_CIRC_UPPER_LEFT:
+		u8g_DrawPixel(u8g, x0, y0 - rad);
+		u8g_DrawPixel(u8g, x0 - rad, y0);
+		circ_util = circ_upperLeft;
+		break;
+	case U8G_CIRC_LOWER_RIGHT:
+		u8g_DrawPixel(u8g, x0, y0 + rad);
+		u8g_DrawPixel(u8g, x0 + rad, y0);
+		circ_util = circ_lowerRight;
+		break;
+	case U8G_CIRC_LOWER_LEFT:
+		u8g_DrawPixel(u8g, x0, y0 + rad);
+		u8g_DrawPixel(u8g, x0 - rad, y0);
+		circ_util = circ_lowerLeft;
+		break;
+        default:
+	case U8G_CIRC_ALL:
+		u8g_DrawPixel(u8g, x0, y0 + rad);
+		u8g_DrawPixel(u8g, x0, y0 - rad);
+		u8g_DrawPixel(u8g, x0 + rad, y0);
+		u8g_DrawPixel(u8g, x0 - rad, y0);
+		circ_util = circ_all;
+		break;
+  }
+  
+  while( x < y )
+  {
+    if(f >= 0) 
+    {
+      y--;
+      ddF_y += 2;
+      f += ddF_y;
+    }
+    x++;
+    ddF_x += 2;
+    f += ddF_x;
+    
+    circ_util(u8g, x, y, x0, y0);
+  }
+}
+
+
+void u8g_DrawFillCirc(u8g_t *u8g, u8g_uint_t x0, u8g_uint_t y0, u8g_uint_t rad, uint8_t option)
+{
+  if ( u8g_IsBBXIntersection(u8g, x0-rad-1, y0-rad-1, 2*rad+1, 2*rad+1) == 0)
+    return;
+
+  int f = 1 - rad;
+  int ddF_x = 1;
+  int ddF_y = -2*rad;
+  uint8_t x = 0;
+  uint8_t y = rad;
+  
+  // Draw vertical diameter at the horiz. center
+  // u8g_DrawVLine(u8g, x0, y0 - rad, 2*rad+1);
+
+  if (option == U8G_CIRC_UPPER_LEFT || option == U8G_CIRC_UPPER_RIGHT) {
+	u8g_DrawVLine(u8g, x0, y0 - rad, rad+1);
+  }
+  else if (option == U8G_CIRC_LOWER_LEFT || option == U8G_CIRC_LOWER_RIGHT) {
+	u8g_DrawVLine(u8g, x0, y0, rad+1);
+  }
+  else {
+	u8g_DrawVLine(u8g, x0, y0 - rad, 2*rad+1);
+  }
+  
+  while( x < y )
+  {
+    if(f >= 0) 
+    {
+      y--;
+      ddF_y += 2;
+      f += ddF_y;
+    }
+    x++;
+    ddF_x += 2;
+    f += ddF_x;
+    
+	//Draw vertical lines from one point to another
+	
+	switch (option)
+	{
+		case U8G_CIRC_UPPER_RIGHT:
+			u8g_DrawVLine(u8g, x0+x, y0-y, y+1);
+			u8g_DrawVLine(u8g, x0+y, y0-x, x+1);
+			break;
+		case U8G_CIRC_UPPER_LEFT:
+			u8g_DrawVLine(u8g, x0-x, y0-y, y+1);
+			u8g_DrawVLine(u8g, x0-y, y0-x, x+1);
+			break;
+		case U8G_CIRC_LOWER_RIGHT:
+			u8g_DrawVLine(u8g, x0+x, y0, y+1);
+			u8g_DrawVLine(u8g, x0+y, y0, x+1);
+			break;
+		case U8G_CIRC_LOWER_LEFT:
+			u8g_DrawVLine(u8g, x0-x, y0, y+1);
+			u8g_DrawVLine(u8g, x0-y, y0, x+1);
+			break;
+		case U8G_CIRC_ALL:
+			u8g_DrawVLine(u8g, x0+x, y0-y, 2*y+1);
+			u8g_DrawVLine(u8g, x0-x, y0-y, 2*y+1);
+			u8g_DrawVLine(u8g, x0+y, y0-x, 2*x+1);
+			u8g_DrawVLine(u8g, x0-y, y0-x, 2*x+1);
+			break;
+	}
+  }
+}
+
+#endif 
+
+/*=========================================================================*/
+
+static void u8g_draw_circle_section(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t x0, u8g_uint_t y0, uint8_t option) U8G_NOINLINE;
+
+static void u8g_draw_circle_section(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t x0, u8g_uint_t y0, uint8_t option)
+{
+    /* upper right */
+    if ( option & U8G_DRAW_UPPER_RIGHT )
+    {
+      u8g_DrawPixel(u8g, x0 + x, y0 - y);
+      u8g_DrawPixel(u8g, x0 + y, y0 - x);
+    }
+    
+    /* upper left */
+    if ( option & U8G_DRAW_UPPER_LEFT )
+    {
+      u8g_DrawPixel(u8g, x0 - x, y0 - y);
+      u8g_DrawPixel(u8g, x0 - y, y0 - x);
+    }
+    
+    /* lower right */
+    if ( option & U8G_DRAW_LOWER_RIGHT )
+    {
+      u8g_DrawPixel(u8g, x0 + x, y0 + y);
+      u8g_DrawPixel(u8g, x0 + y, y0 + x);
+    }
+    
+    /* lower left */
+    if ( option & U8G_DRAW_LOWER_LEFT )
+    {
+      u8g_DrawPixel(u8g, x0 - x, y0 + y);
+      u8g_DrawPixel(u8g, x0 - y, y0 + x);
+    }
+}
+
+void u8g_draw_circle(u8g_t *u8g, u8g_uint_t x0, u8g_uint_t y0, u8g_uint_t rad, uint8_t option)
+{
+    u8g_int_t f;
+    u8g_int_t ddF_x;
+    u8g_int_t ddF_y;
+    u8g_uint_t x;
+    u8g_uint_t y;
+
+    f = 1;
+    f -= rad;
+    ddF_x = 1;
+    ddF_y = 0;
+    ddF_y -= rad;
+    ddF_y *= 2;
+    x = 0;
+    y = rad;
+
+    u8g_draw_circle_section(u8g, x, y, x0, y0, option);
+    
+    while ( x < y )
+    {
+      if (f >= 0) 
+      {
+        y--;
+        ddF_y += 2;
+        f += ddF_y;
+      }
+      x++;
+      ddF_x += 2;
+      f += ddF_x;
+
+      u8g_draw_circle_section(u8g, x, y, x0, y0, option);    
+    }
+}
+
+void u8g_DrawCircle(u8g_t *u8g, u8g_uint_t x0, u8g_uint_t y0, u8g_uint_t rad, uint8_t option)
+{
+  /* check for bounding box */
+  {
+    u8g_uint_t radp, radp2;
+    
+    radp = rad;
+    radp++;
+    radp2 = radp;
+    radp2 *= 2;
+    
+    if ( u8g_IsBBXIntersection(u8g, x0-radp, y0-radp, radp2, radp2) == 0)
+      return;    
+  }
+  
+  /* draw circle */
+  u8g_draw_circle(u8g, x0, y0, rad, option);
+}
+
+static void u8g_draw_disc_section(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t x0, u8g_uint_t y0, uint8_t option) U8G_NOINLINE;
+
+static void u8g_draw_disc_section(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t x0, u8g_uint_t y0, uint8_t option)
+{
+    /* upper right */
+    if ( option & U8G_DRAW_UPPER_RIGHT )
+    {
+      u8g_DrawVLine(u8g, x0+x, y0-y, y+1);
+      u8g_DrawVLine(u8g, x0+y, y0-x, x+1);
+    }
+    
+    /* upper left */
+    if ( option & U8G_DRAW_UPPER_LEFT )
+    {
+      u8g_DrawVLine(u8g, x0-x, y0-y, y+1);
+      u8g_DrawVLine(u8g, x0-y, y0-x, x+1);
+    }
+    
+    /* lower right */
+    if ( option & U8G_DRAW_LOWER_RIGHT )
+    {
+      u8g_DrawVLine(u8g, x0+x, y0, y+1);
+      u8g_DrawVLine(u8g, x0+y, y0, x+1);
+    }
+    
+    /* lower left */
+    if ( option & U8G_DRAW_LOWER_LEFT )
+    {
+      u8g_DrawVLine(u8g, x0-x, y0, y+1);
+      u8g_DrawVLine(u8g, x0-y, y0, x+1);
+    }
+}
+
+void u8g_draw_disc(u8g_t *u8g, u8g_uint_t x0, u8g_uint_t y0, u8g_uint_t rad, uint8_t option)
+{
+  u8g_int_t f;
+  u8g_int_t ddF_x;
+  u8g_int_t ddF_y;
+  u8g_uint_t x;
+  u8g_uint_t y;
+
+  f = 1;
+  f -= rad;
+  ddF_x = 1;
+  ddF_y = 0;
+  ddF_y -= rad;
+  ddF_y *= 2;
+  x = 0;
+  y = rad;
+
+  u8g_draw_disc_section(u8g, x, y, x0, y0, option);
+  
+  while ( x < y )
+  {
+    if (f >= 0) 
+    {
+      y--;
+      ddF_y += 2;
+      f += ddF_y;
+    }
+    x++;
+    ddF_x += 2;
+    f += ddF_x;
+
+    u8g_draw_disc_section(u8g, x, y, x0, y0, option);    
+  }
+}
+
+void u8g_DrawDisc(u8g_t *u8g, u8g_uint_t x0, u8g_uint_t y0, u8g_uint_t rad, uint8_t option)
+{
+  /* check for bounding box */
+  {
+    u8g_uint_t radp, radp2;
+    
+    radp = rad;
+    radp++;
+    radp2 = radp;
+    radp2 *= 2;
+    
+    if ( u8g_IsBBXIntersection(u8g, x0-radp, y0-radp, radp2, radp2) == 0)
+      return;    
+  }
+  
+  /* draw disc */
+  u8g_draw_disc(u8g, x0, y0, rad, option);
+}
+
+
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_clip.c

@@ -0,0 +1,156 @@
+/*
+
+  u8g_clip.c
+  
+  procedures for clipping
+  taken over from procs in u8g_pb.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  Notes
+  
+  This is one of the most critical parts of u8glib. It must be fast, but still reliable.
+  Based on the intersection program (see tools folder), there is minimized version of
+  the condition for the intersaction test:
+    minimized version
+    ---1----0 1             b1 <= a2 && b1 > b2
+    -----1--0 1             b2 >= a1 && b1 > b2
+    ---1-1--- 1             b1 <= a2 && b2 >= a1
+  It includes the assumption, that a1 <= a2 is always true (correct, because
+  a1, a2 are the page dimensions.
+
+  The direct implementation of the above result is done in:
+  uint8_t u8g_is_intersection_boolean(u8g_uint_t a0, u8g_uint_t a1, u8g_uint_t v0, u8g_uint_t v1)
+  However, this is slower than a decision tree version:  
+  static uint8_t u8g_is_intersection_decision_tree(u8g_uint_t a0, u8g_uint_t a1, u8g_uint_t v0, u8g_uint_t v1) 
+  Also suprising is, that he the macro implementation is slower than the inlined version.
+  
+  The decision tree is based on the expansion of the truth table.
+  
+*/
+
+#include "u8g.h"
+
+#ifdef __GNUC__
+#define U8G_ALWAYS_INLINE __attribute__((always_inline))
+#else
+#define U8G_ALWAYS_INLINE
+ #endif 
+
+/*
+  intersection assumptions:
+    a1 <= a2 is always true    
+    
+    minimized version
+    ---1----0 1             b1 <= a2 && b1 > b2
+    -----1--0 1             b2 >= a1 && b1 > b2
+    ---1-1--- 1             b1 <= a2 && b2 >= a1
+  */
+
+#ifdef OLD_CODE_WHICH_IS_TOO_SLOW
+static uint8_t u8g_is_intersection_boolean(u8g_uint_t a0, u8g_uint_t a1, u8g_uint_t v0, u8g_uint_t v1)
+{
+  uint8_t c1, c2, c3, tmp;
+  c1 = v0 <= a1;
+  c2 = v1 >= a0;
+  c3 = v0 > v1;
+  
+  tmp = c1;
+  c1 &= c2;
+  c2 &= c3;
+  c3 &= tmp;
+  c1 |= c2;
+  c1 |= c3;
+  return c1 & 1;
+}
+#endif
+
+#define U8G_IS_INTERSECTION_MACRO(a0,a1,v0,v1) ((uint8_t)( (v0) <= (a1) ) ? ( ( (v1) >= (a0) ) ? ( 1 ) : ( (v0) > (v1) ) ) : ( ( (v1) >= (a0) ) ? ( (v0) > (v1) ) : ( 0 ) ))
+
+static uint8_t u8g_is_intersection_decision_tree(u8g_uint_t a0, u8g_uint_t a1, u8g_uint_t v0, u8g_uint_t v1)  U8G_ALWAYS_INLINE;
+static uint8_t u8g_is_intersection_decision_tree(u8g_uint_t a0, u8g_uint_t a1, u8g_uint_t v0, u8g_uint_t v1) 
+{
+  /* surprisingly the macro leads to larger code */
+  /* return U8G_IS_INTERSECTION_MACRO(a0,a1,v0,v1); */
+  if ( v0 <= a1 )
+  {
+    if ( v1 >= a0 )
+    {
+      return 1;
+    }
+    else
+    {
+      if ( v0 > v1 )
+      {
+	return 1;
+      }
+      else
+      {
+	return 0;
+      }
+    }
+  }
+  else
+  {
+    if ( v1 >= a0 )
+    {
+      if ( v0 > v1 )
+      {
+	return 1;
+      }
+      else
+      {
+	return 0;
+      }
+    }
+    else
+    {
+      return 0;
+    }
+  }
+}
+
+
+uint8_t u8g_IsBBXIntersection(u8g_t *u8g, u8g_uint_t x, u8g_uint_t y, u8g_uint_t w, u8g_uint_t h)
+{
+  register u8g_uint_t tmp;
+  tmp = y;
+  tmp += h;
+  tmp--;
+  if ( u8g_is_intersection_decision_tree(u8g->current_page.y0, u8g->current_page.y1, y, tmp) == 0 )
+    return 0; 
+  
+  tmp = x;
+  tmp += w;
+  tmp--;
+  return u8g_is_intersection_decision_tree(u8g->current_page.x0, u8g->current_page.x1, x, tmp);
+}
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_api.c

@@ -0,0 +1,173 @@
+/*
+
+  u8g_com_api.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+uint8_t u8g_InitCom(u8g_t *u8g, u8g_dev_t *dev)
+{
+  return dev->com_fn(u8g, U8G_COM_MSG_INIT, 0, NULL);
+}
+
+void u8g_StopCom(u8g_t *u8g, u8g_dev_t *dev)
+{
+  dev->com_fn(u8g, U8G_COM_MSG_STOP, 0, NULL);
+}
+
+/* cs contains the chip number, which should be enabled */
+void u8g_SetChipSelect(u8g_t *u8g, u8g_dev_t *dev, uint8_t cs)
+{
+  dev->com_fn(u8g, U8G_COM_MSG_CHIP_SELECT, cs, NULL);
+}
+
+void u8g_SetResetLow(u8g_t *u8g, u8g_dev_t *dev)
+{
+  dev->com_fn(u8g, U8G_COM_MSG_RESET, 0, NULL);
+}
+
+void u8g_SetResetHigh(u8g_t *u8g, u8g_dev_t *dev)
+{
+  dev->com_fn(u8g, U8G_COM_MSG_RESET, 1, NULL);
+}
+
+
+void u8g_SetAddress(u8g_t *u8g, u8g_dev_t *dev, uint8_t address)
+{
+  dev->com_fn(u8g, U8G_COM_MSG_ADDRESS, address, NULL);
+}
+
+uint8_t u8g_WriteByte(u8g_t *u8g, u8g_dev_t *dev, uint8_t val)
+{
+  return dev->com_fn(u8g, U8G_COM_MSG_WRITE_BYTE, val, NULL);
+}
+
+uint8_t u8g_WriteSequence(u8g_t *u8g, u8g_dev_t *dev, uint8_t cnt, uint8_t *seq)
+{
+  return dev->com_fn(u8g, U8G_COM_MSG_WRITE_SEQ, cnt, seq);
+}
+
+uint8_t u8g_WriteSequenceP(u8g_t *u8g, u8g_dev_t *dev, uint8_t cnt, const uint8_t *seq)
+{
+  return dev->com_fn(u8g, U8G_COM_MSG_WRITE_SEQ_P, cnt, (void *)seq);
+}
+
+/*
+  sequence := { direct_value | escape_sequence }
+  direct_value := 0..254
+  escape_sequence := value_255 | sequence_end | delay | adr | cs | not_used 
+  value_255 := 255 255
+  sequence_end = 255 254
+  delay := 255 0..127
+  adr := 255 0x0e0 .. 0x0ef 
+  cs := 255 0x0d0 .. 0x0df 
+  not_used := 255 101..254
+
+#define U8G_ESC_DLY(x) 255, ((x) & 0x7f)
+#define U8G_ESC_CS(x) 255, (0xd0 | ((x)&0x0f))
+#define U8G_ESC_ADR(x) 255, (0xe0 | ((x)&0x0f))
+#define U8G_ESC_VCC(x) 255, (0xbe | ((x)&0x01))
+#define U8G_ESC_END 255, 254
+#define U8G_ESC_255 255, 255
+#define U8G_ESC_RST(x) 255, (0xc0 | ((x)&0x0f))
+
+*/
+uint8_t u8g_WriteEscSeqP(u8g_t *u8g, u8g_dev_t *dev, const uint8_t *esc_seq)
+{
+  uint8_t is_escape = 0;
+  uint8_t value;
+  for(;;)
+  {
+    value = u8g_pgm_read(esc_seq);
+    if ( is_escape == 0 )
+    {
+      if ( value != 255 )
+      {
+        if ( u8g_WriteByte(u8g, dev, value) == 0 )
+          return 0;
+      }
+      else
+      {
+        is_escape = 1;
+      }
+    }
+    else
+    {
+      if ( value == 255 )
+      {
+        if ( u8g_WriteByte(u8g, dev, value) == 0 )
+          return 0;
+      }
+      else if ( value == 254 )
+      {
+        break;
+      }
+      else if ( value >= 0x0f0 )
+      {
+        /* not yet used, do nothing */
+      }
+      else if ( value >= 0xe0  )
+      {
+        u8g_SetAddress(u8g, dev, value & 0x0f);
+      }
+      else if ( value >= 0xd0 )
+      {
+        u8g_SetChipSelect(u8g, dev, value & 0x0f);
+      }
+      else if ( value >= 0xc0 )
+      {
+        u8g_SetResetLow(u8g, dev);
+        value &= 0x0f;
+        value <<= 4;
+        value+=2;
+        u8g_Delay(value);
+        u8g_SetResetHigh(u8g, dev);
+        u8g_Delay(value);
+      }
+      else if ( value >= 0xbe )
+      {
+	/* not yet implemented */
+        /* u8g_SetVCC(u8g, dev, value & 0x01); */
+      }
+      else if ( value <= 127 )
+      {
+        u8g_Delay(value);
+      }
+      is_escape = 0;
+    }
+    esc_seq++;
+  }
+  return 1;
+}
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_api_16gr.c

@@ -0,0 +1,94 @@
+/*
+
+  u8g_com_api_16gr.c
+  
+  Extension of the com api for devices with 16 graylevels (4 bit per pixel).
+  This should fit to the 8h and 16h architectures (pb8v1, pb8v2, pb16v1, pb16v2), 
+  mainly intended for SSD OLEDs
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+/* interpret b as a monochrome bit pattern, write value 15 for high bit and value 0 for a low bit */
+/* topbit (msb) is sent last */
+/* example: b = 0x083 will send 0xff, 0x00, 0x00, 0xf0 */
+uint8_t u8g_WriteByteBWTo16GrDevice(u8g_t *u8g, u8g_dev_t *dev, uint8_t b)
+{
+  static uint8_t buf[4];
+  static uint8_t map[4] = { 0, 0x00f, 0x0f0, 0x0ff };
+  buf [3] = map[b & 3];
+  b>>=2;
+  buf [2] = map[b & 3];
+  b>>=2;
+  buf [1] = map[b & 3];
+  b>>=2;
+  buf [0] = map[b & 3];
+  return dev->com_fn(u8g, U8G_COM_MSG_WRITE_SEQ, 4, buf);
+}
+
+uint8_t u8g_WriteSequenceBWTo16GrDevice(u8g_t *u8g, u8g_dev_t *dev, uint8_t cnt, uint8_t *ptr)
+{
+  do
+  {
+    if ( u8g_WriteByteBWTo16GrDevice(u8g, dev, *ptr++) == 0 )
+      return 0;
+    cnt--;
+  } while( cnt != 0 );
+  return 1;
+}
+
+/* interpret b as a 4L bit pattern, write values 0x000, 0x004, 0x008, 0x00c */
+uint8_t u8g_WriteByte4LTo16GrDevice(u8g_t *u8g, u8g_dev_t *dev, uint8_t b)
+{
+  //static uint8_t map[16] = { 0x000, 0x004, 0x008, 0x00c, 0x040, 0x044, 0x048, 0x04c, 0x080, 0x084, 0x088, 0x08c, 0x0c0, 0x0c4, 0x0c8, 0x0cc};
+  //static uint8_t map[16] = { 0x000, 0x004, 0x00a, 0x00f, 0x040, 0x044, 0x04a, 0x04f, 0x0a0, 0x0a4, 0x0aa, 0x0af, 0x0f0, 0x0f4, 0x0fa, 0x0ff};
+  static uint8_t map[16] = { 0x000, 0x040, 0x0a0, 0x0f0, 0x004, 0x044, 0x0a4, 0x0f4, 0x00a, 0x04a, 0x0aa, 0x0fa, 0x00f, 0x04f, 0x0af, 0x0ff};
+  uint8_t bb;
+  bb = b;
+  bb &= 15;
+  b>>=4;
+  dev->com_fn(u8g, U8G_COM_MSG_WRITE_BYTE, map[bb], NULL);
+  return dev->com_fn(u8g, U8G_COM_MSG_WRITE_BYTE, map[b], NULL);
+}
+
+uint8_t u8g_WriteSequence4LTo16GrDevice(u8g_t *u8g, u8g_dev_t *dev, uint8_t cnt, uint8_t *ptr)
+{
+  do
+  {
+    if ( u8g_WriteByte4LTo16GrDevice(u8g, dev, *ptr++) == 0 )
+      return 0;
+    cnt--;
+  } while( cnt != 0 );
+  return 1;
+}

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_arduino_common.c

@@ -0,0 +1,75 @@
+/*
+  
+  u8g_com_arduino_common.c
+  
+  shared procedures for the arduino communication procedures
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+
+*/
+
+#include "u8g.h"
+
+#if defined(ARDUINO)
+
+#if ARDUINO < 100 
+#include <WProgram.h> 
+#else 
+#include <Arduino.h> 
+#endif
+
+void u8g_com_arduino_digital_write(u8g_t *u8g, uint8_t pin_index, uint8_t value)
+{
+  uint8_t pin;
+  pin = u8g->pin_list[pin_index];
+  if ( pin != U8G_PIN_NONE )
+    digitalWrite(pin, value);
+}
+
+/* this procedure does not set the RW pin */
+void u8g_com_arduino_assign_pin_output_high(u8g_t *u8g)
+{
+  uint8_t i;
+  /* skip the RW pin, which is the last pin in the list */
+  for( i = 0; i < U8G_PIN_LIST_LEN-1; i++ )
+  {
+    if ( u8g->pin_list[i] != U8G_PIN_NONE )
+    {
+      pinMode(u8g->pin_list[i], OUTPUT);	
+      digitalWrite(u8g->pin_list[i], HIGH);
+    }
+  }
+}
+
+
+#endif
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_arduino_fast_parallel.c

@@ -0,0 +1,245 @@
+/*
+  
+  u8g_arduino_fast_parallel.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  PIN_D0 8
+  PIN_D1 9
+  PIN_D2 10
+  PIN_D3 11
+  PIN_D4 4
+  PIN_D5 5
+  PIN_D6 6
+  PIN_D7 7
+
+  PIN_CS1 14
+  PIN_CS2 15
+  PIN_RW 16
+  PIN_DI 17
+  PIN_EN 18
+  
+  u8g_Init8Bit(u8g, dev, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, cs2, di, rw, reset)
+  u8g_Init8Bit(u8g, dev,  8,    9, 10, 11,   4,   5,   6,   7, 18, 14, 15, 17, 16, U8G_PIN_NONE)
+
+*/
+
+#include "u8g.h"
+
+#if  defined(ARDUINO)
+
+#if ARDUINO < 100 
+//#include <WProgram.h> 
+#include <wiring_private.h> 
+#include <pins_arduino.h> 
+#else 
+#include <Arduino.h> 
+#endif
+
+
+#define PIN_D0 8
+#define PIN_D1 9
+#define PIN_D2 10
+#define PIN_D3 11
+#define PIN_D4 4
+#define PIN_D5 5
+#define PIN_D6 6
+#define PIN_D7 7
+
+#define PIN_CS1 14
+#define PIN_CS2 15
+#define PIN_RW 16
+#define PIN_DI 17
+#define PIN_EN 18
+
+//#define PIN_RESET
+
+
+#if defined(__PIC32MX)
+/* CHIPKIT PIC32 */
+static volatile uint32_t *u8g_data_port[8];
+static uint32_t u8g_data_mask[8];
+#else
+static volatile uint8_t *u8g_data_port[8];
+static uint8_t u8g_data_mask[8];
+#endif
+
+
+
+static void u8g_com_arduino_fast_parallel_init(u8g_t *u8g)
+{
+  u8g_data_port[0] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D0]));
+  u8g_data_mask[0] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D0]);
+  u8g_data_port[1] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D1]));
+  u8g_data_mask[1] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D1]);
+  u8g_data_port[2] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D2]));
+  u8g_data_mask[2] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D2]);
+  u8g_data_port[3] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D3]));
+  u8g_data_mask[3] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D3]);
+  
+  u8g_data_port[4] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D4]));
+  u8g_data_mask[4] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D4]);
+  u8g_data_port[5] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D5]));
+  u8g_data_mask[5] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D5]);
+  u8g_data_port[6] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D6]));
+  u8g_data_mask[6] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D6]);
+  u8g_data_port[7] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D7]));
+  u8g_data_mask[7] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D7]);  
+}
+
+void u8g_com_arduino_fast_write_data_pin(uint8_t pin, uint8_t val)
+{
+  if ( val != 0 )
+    *u8g_data_port[pin] |= u8g_data_mask[pin];
+  else
+    *u8g_data_port[pin] &= ~u8g_data_mask[pin];
+}
+
+
+void u8g_com_arduino_fast_parallel_write(u8g_t *u8g, uint8_t val)
+{
+  u8g_com_arduino_fast_write_data_pin( 0, val&1 );
+  val >>= 1;
+  u8g_com_arduino_fast_write_data_pin( 1, val&1 );
+  val >>= 1;
+  u8g_com_arduino_fast_write_data_pin( 2, val&1 );
+  val >>= 1;
+  u8g_com_arduino_fast_write_data_pin( 3, val&1 );
+  val >>= 1;
+
+  u8g_com_arduino_fast_write_data_pin( 4, val&1 );
+  val >>= 1;
+  u8g_com_arduino_fast_write_data_pin( 5, val&1 );
+  val >>= 1;
+  u8g_com_arduino_fast_write_data_pin( 6, val&1 );
+  val >>= 1;
+  u8g_com_arduino_fast_write_data_pin( 7, val&1 );
+  val >>= 1;
+  
+  /* EN cycle time must be 1 micro second */
+  u8g_com_arduino_digital_write(u8g, U8G_PI_EN, HIGH);
+  u8g_MicroDelay(); /* delay by 1000ns, reference: ST7920: 140ns, SBN1661: 100ns */
+  u8g_com_arduino_digital_write(u8g, U8G_PI_EN, LOW);
+  u8g_10MicroDelay(); /* ST7920 commands: 72us */
+  u8g_10MicroDelay(); /* ST7920 commands: 72us */
+}
+
+
+uint8_t u8g_com_arduino_fast_parallel_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  switch(msg)
+  {
+    case U8G_COM_MSG_INIT:
+      u8g_com_arduino_fast_parallel_init(u8g);
+      /* setup the RW pin as output and force it to low */
+      if ( u8g->pin_list[U8G_PI_RW] != U8G_PIN_NONE )
+      {
+        pinMode(u8g->pin_list[U8G_PI_RW], OUTPUT);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_RW, LOW);
+      }
+      /* set all pins (except RW pin) */
+      u8g_com_arduino_assign_pin_output_high(u8g);
+      break;
+    case U8G_COM_MSG_STOP:
+      break;
+
+    case U8G_COM_MSG_CHIP_SELECT:
+      if ( arg_val == 0 )
+      {
+        /* disable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS1, HIGH);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS2, HIGH);
+      }
+      else if ( arg_val == 1 )
+      {
+        /* enable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS1, LOW);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS2, HIGH);
+      }
+      else if ( arg_val == 2 )
+      {
+        /* enable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS1, HIGH);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS2, LOW);
+      }
+      else
+      {
+        /* enable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS1, LOW);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS2, LOW);
+      }
+      break;
+    case U8G_COM_MSG_WRITE_BYTE:
+      u8g_com_arduino_fast_parallel_write(u8g, arg_val);
+      break;
+    case U8G_COM_MSG_WRITE_SEQ:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_arduino_fast_parallel_write(u8g, *ptr++);
+          arg_val--;
+        }
+      }
+      break;
+    case U8G_COM_MSG_WRITE_SEQ_P:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_arduino_fast_parallel_write(u8g, u8g_pgm_read(ptr));
+          ptr++;
+          arg_val--;
+        }
+      }
+      break;
+    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+      u8g_com_arduino_digital_write(u8g, U8G_PI_DI, arg_val);
+      break;
+    case U8G_COM_MSG_RESET:
+      if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
+        u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
+      break;
+      
+  }
+  return 1;
+}
+
+#else
+
+
+uint8_t u8g_com_arduino_fast_parallel_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  return 1;
+}
+
+
+#endif /* ARDUINO */
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_arduino_hw_spi.c

@@ -0,0 +1,191 @@
+/*
+  
+  u8g_com_arduino_hw_spi.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+
+*/
+
+#include "u8g.h"
+
+#if defined(ARDUINO)
+
+#if defined(__AVR__)
+
+#include <avr/interrupt.h>
+#include <avr/io.h>
+
+#if ARDUINO < 100 
+#include <WProgram.h> 
+
+/* fixed pins */
+#if defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__) // Sanguino.cc board
+#define PIN_SCK         7
+#define PIN_MISO        6
+#define PIN_MOSI        5
+#define PIN_CS          4
+#else                                   // Arduino Board
+#define PIN_SCK 13
+#define PIN_MISO  12
+#define PIN_MOSI 11
+#define PIN_CS 10
+#endif // (__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)
+
+#else 
+
+#include <Arduino.h> 
+
+/* use Arduino pin definitions */
+#define PIN_SCK SCK
+#define PIN_MISO  MISO
+#define PIN_MOSI MOSI
+#define PIN_CS SS
+
+#endif
+
+
+
+//static uint8_t u8g_spi_out(uint8_t data) U8G_NOINLINE;
+static uint8_t u8g_spi_out(uint8_t data)
+{
+  /* unsigned char x = 100; */
+  /* send data */
+  SPDR = data;
+  /* wait for transmission */
+  while (!(SPSR & (1<<SPIF))) 
+    ;
+  /* clear the SPIF flag by reading SPDR */
+  return  SPDR;
+}
+
+
+uint8_t u8g_com_arduino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  switch(msg)
+  {
+    case U8G_COM_MSG_STOP:
+      break;
+    
+    case U8G_COM_MSG_INIT:
+      u8g_com_arduino_assign_pin_output_high(u8g);
+      pinMode(PIN_SCK, OUTPUT);
+      digitalWrite(PIN_SCK, LOW);
+      pinMode(PIN_MOSI, OUTPUT);
+      digitalWrite(PIN_MOSI, LOW);
+      /* pinMode(PIN_MISO, INPUT); */
+
+      pinMode(PIN_CS, OUTPUT);			/* system chip select for the atmega board */
+      digitalWrite(PIN_CS, HIGH);
+    
+
+
+      /*
+        SPR1 SPR0
+            0	0		fclk/4
+            0	1		fclk/16
+            1	0		fclk/64
+            1	1		fclk/128
+      */
+      SPCR = 0;
+      SPCR =  (1<<SPE) | (1<<MSTR)|(0<<SPR1)|(1<<SPR0)|(0<<CPOL)|(0<<CPHA);
+#ifdef U8G_HW_SPI_2X
+      SPSR = (1 << SPI2X);  /* double speed, issue 89 */
+#endif
+      
+      break;
+    
+    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+      u8g_com_arduino_digital_write(u8g, U8G_PI_A0, arg_val);
+      break;
+
+    case U8G_COM_MSG_CHIP_SELECT:
+      if ( arg_val == 0 )
+      {
+        /* disable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
+      }
+      else
+      {
+        /* enable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, LOW);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
+      }
+      break;
+      
+    case U8G_COM_MSG_RESET:
+      if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
+        u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
+      break;
+    
+    case U8G_COM_MSG_WRITE_BYTE:
+      u8g_spi_out(arg_val);
+      break;
+    
+    case U8G_COM_MSG_WRITE_SEQ:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_spi_out(*ptr++);
+          arg_val--;
+        }
+      }
+      break;
+    case U8G_COM_MSG_WRITE_SEQ_P:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_spi_out(u8g_pgm_read(ptr));
+          ptr++;
+          arg_val--;
+        }
+      }
+      break;
+  }
+  return 1;
+}
+
+/* #elif defined(__18CXX) || defined(__PIC32MX) */
+
+#else /* __AVR__ */
+
+#endif /* __AVR__ */
+
+#else /* ARDUINO */
+
+uint8_t u8g_com_arduino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  return 1;
+}
+
+#endif /* ARDUINO */
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_arduino_no_en_parallel.c

@@ -0,0 +1,221 @@
+/*
+  
+  u8g_arduino_no_en_parallel.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  PIN_D0 8
+  PIN_D1 9
+  PIN_D2 10
+  PIN_D3 11
+  PIN_D4 4
+  PIN_D5 5
+  PIN_D6 6
+  PIN_D7 7
+
+  PIN_CS1 14
+  PIN_CS2 15
+  PIN_RW 16
+  PIN_DI 17
+  PIN_EN 18
+  
+  u8g_Init8Bit(u8g, dev, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, cs2, di, rw, reset)
+  u8g_Init8Bit(u8g, dev,  8,    9, 10, 11,   4,   5,   6,   7, 18, 14, 15, 17, 16, U8G_PIN_NONE)
+
+*/
+
+#include "u8g.h"
+
+#if  defined(ARDUINO)
+
+#if ARDUINO < 100 
+//#include <WProgram.h> 
+#include <wiring_private.h> 
+#include <pins_arduino.h> 
+#else 
+#include <Arduino.h> 
+#endif
+
+//#define PIN_RESET
+
+#if defined(__PIC32MX)
+/* CHIPKIT PIC32 */
+static volatile uint32_t *u8g_data_port[8];
+static uint32_t u8g_data_mask[8];
+#else
+static volatile uint8_t *u8g_data_port[8];
+static uint8_t u8g_data_mask[8];
+#endif
+
+
+
+static void u8g_com_arduino_no_en_parallel_init(u8g_t *u8g)
+{
+  u8g_data_port[0] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D0]));
+  u8g_data_mask[0] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D0]);
+  u8g_data_port[1] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D1]));
+  u8g_data_mask[1] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D1]);
+  u8g_data_port[2] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D2]));
+  u8g_data_mask[2] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D2]);
+  u8g_data_port[3] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D3]));
+  u8g_data_mask[3] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D3]);
+  
+  u8g_data_port[4] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D4]));
+  u8g_data_mask[4] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D4]);
+  u8g_data_port[5] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D5]));
+  u8g_data_mask[5] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D5]);
+  u8g_data_port[6] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D6]));
+  u8g_data_mask[6] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D6]);
+  u8g_data_port[7] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D7]));
+  u8g_data_mask[7] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D7]);  
+}
+
+void u8g_com_arduino_no_en_write_data_pin(uint8_t pin, uint8_t val)
+{
+  if ( val != 0 )
+    *u8g_data_port[pin] |= u8g_data_mask[pin];
+  else
+    *u8g_data_port[pin] &= ~u8g_data_mask[pin];
+}
+
+
+void u8g_com_arduino_no_en_parallel_write(u8g_t *u8g, uint8_t val)
+{
+  u8g_com_arduino_no_en_write_data_pin( 0, val&1 );
+  val >>= 1;
+  u8g_com_arduino_no_en_write_data_pin( 1, val&1 );
+  val >>= 1;
+  u8g_com_arduino_no_en_write_data_pin( 2, val&1 );
+  val >>= 1;
+  u8g_com_arduino_no_en_write_data_pin( 3, val&1 );
+  val >>= 1;
+
+  u8g_com_arduino_no_en_write_data_pin( 4, val&1 );
+  val >>= 1;
+  u8g_com_arduino_no_en_write_data_pin( 5, val&1 );
+  val >>= 1;
+  u8g_com_arduino_no_en_write_data_pin( 6, val&1 );
+  val >>= 1;
+  u8g_com_arduino_no_en_write_data_pin( 7, val&1 );
+  val >>= 1;
+  
+  /* EN cycle time must be 1 micro second, digitalWrite is slow enough to do this */
+  if ( u8g->pin_list[U8G_PI_CS_STATE] == 1 )
+  {
+    u8g_MicroDelay();
+    u8g_com_arduino_digital_write(u8g, U8G_PI_CS1, HIGH);
+    u8g_MicroDelay();
+    u8g_com_arduino_digital_write(u8g, U8G_PI_CS1, LOW);
+    u8g_MicroDelay();
+  }
+  else if ( u8g->pin_list[U8G_PI_CS_STATE] == 2 )
+  {
+    u8g_MicroDelay();
+    u8g_com_arduino_digital_write(u8g, U8G_PI_CS2, HIGH);
+    u8g_MicroDelay();
+    u8g_com_arduino_digital_write(u8g, U8G_PI_CS2, LOW);
+    u8g_MicroDelay();
+  }
+}
+
+
+uint8_t u8g_com_arduino_no_en_parallel_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  switch(msg)
+  {
+    case U8G_COM_MSG_INIT:
+      u8g_com_arduino_no_en_parallel_init(u8g);
+      /* setup the RW pin as output and force it to low */
+      if ( u8g->pin_list[U8G_PI_RW] != U8G_PIN_NONE )
+      {
+        pinMode(u8g->pin_list[U8G_PI_RW], OUTPUT);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_RW, LOW);
+      }
+      /* set all pins (except RW pin) */
+      u8g_com_arduino_assign_pin_output_high(u8g);
+      break;
+    case U8G_COM_MSG_STOP:
+      break;
+
+    case U8G_COM_MSG_CHIP_SELECT:
+      /*
+	0: nothing selected
+	1: CS1 will be used as enable line
+        2: CS2 will be used as enable line
+        this will be used in the u8g_com_arduino_no_en_parallel_write() procedure
+      */
+      u8g->pin_list[U8G_PI_CS_STATE] = arg_val;
+      break;
+    case U8G_COM_MSG_WRITE_BYTE:
+      u8g_com_arduino_no_en_parallel_write(u8g, arg_val);
+      break;
+    case U8G_COM_MSG_WRITE_SEQ:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_arduino_no_en_parallel_write(u8g, *ptr++);
+          arg_val--;
+        }
+      }
+      break;
+    case U8G_COM_MSG_WRITE_SEQ_P:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_arduino_no_en_parallel_write(u8g, u8g_pgm_read(ptr));
+          ptr++;
+          arg_val--;
+        }
+      }
+      break;
+    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+      u8g_com_arduino_digital_write(u8g, U8G_PI_DI, arg_val);
+      break;
+    case U8G_COM_MSG_RESET:
+      if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
+        u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
+      break;
+  }
+  return 1;
+}
+
+#else
+
+
+uint8_t u8g_com_arduino_no_en_parallel_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  return 1;
+}
+
+
+#endif /* ARDUINO */
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_arduino_parallel.c

@@ -0,0 +1,187 @@
+/*
+  
+  u8g_arduino_parallel.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+
+  PIN_D0 8
+  PIN_D1 9
+  PIN_D2 10
+  PIN_D3 11
+  PIN_D4 4
+  PIN_D5 5
+  PIN_D6 6
+  PIN_D7 7
+
+  PIN_CS1 14
+  PIN_CS2 15
+  PIN_RW 16
+  PIN_DI 17
+  PIN_EN 18
+  
+  u8g_Init8Bit(u8g, dev, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, cs2, di, rw, reset)
+  u8g_Init8Bit(u8g, dev,  8,    9, 10, 11,   4,   5,   6,   7, 18, 14, 15, 17, 16, U8G_PIN_NONE)
+
+*/
+
+#include "u8g.h"
+
+
+#if  defined(ARDUINO)
+
+#if ARDUINO < 100 
+#include <WProgram.h> 
+#else 
+#include <Arduino.h> 
+#endif
+
+
+
+
+
+
+void u8g_com_arduino_parallel_write(u8g_t *u8g, uint8_t val)
+{
+  u8g_com_arduino_digital_write(u8g, U8G_PI_D0, val&1);
+  val >>= 1;
+  u8g_com_arduino_digital_write(u8g, U8G_PI_D1, val&1);
+  val >>= 1;
+  u8g_com_arduino_digital_write(u8g, U8G_PI_D2, val&1);
+  val >>= 1;
+  u8g_com_arduino_digital_write(u8g, U8G_PI_D3, val&1);
+  val >>= 1;
+  u8g_com_arduino_digital_write(u8g, U8G_PI_D4, val&1);
+  val >>= 1;
+  u8g_com_arduino_digital_write(u8g, U8G_PI_D5, val&1);
+  val >>= 1;
+  u8g_com_arduino_digital_write(u8g, U8G_PI_D6, val&1);
+  val >>= 1;
+  u8g_com_arduino_digital_write(u8g, U8G_PI_D7, val&1);
+  
+  /* EN cycle time must be 1 micro second, digitalWrite is slow enough to do this */
+  //u8g_Delay(1);
+  u8g_com_arduino_digital_write(u8g, U8G_PI_EN, HIGH);
+  //u8g_Delay(1);
+  u8g_MicroDelay(); /* delay by 1000ns, reference: ST7920: 140ns, SBN1661: 100ns */
+  u8g_com_arduino_digital_write(u8g, U8G_PI_EN, LOW);
+  u8g_10MicroDelay(); /* ST7920 commands: 72us */
+  //u8g_Delay(2);
+}
+
+
+uint8_t u8g_com_arduino_parallel_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  switch(msg)
+  {
+    case U8G_COM_MSG_INIT:
+      /* setup the RW pin as output and force it to low */
+      if ( u8g->pin_list[U8G_PI_RW] != U8G_PIN_NONE )
+      {
+        pinMode(u8g->pin_list[U8G_PI_RW], OUTPUT);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_RW, LOW);
+      }
+      /* set all pins (except RW pin) */
+      u8g_com_arduino_assign_pin_output_high(u8g);
+      break;
+    case U8G_COM_MSG_STOP:
+      break;
+    case U8G_COM_MSG_CHIP_SELECT:
+      if ( arg_val == 0 )
+      {
+        /* disable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS1, HIGH);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS2, HIGH);
+      }
+      else if ( arg_val == 1 )
+      {
+        /* enable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS1, LOW);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS2, HIGH);
+      }
+      else if ( arg_val == 2 )
+      {
+        /* enable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS1, HIGH);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS2, LOW);
+      }
+      else
+      {
+        /* enable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS1, LOW);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS2, LOW);
+      }
+      break;
+    case U8G_COM_MSG_WRITE_BYTE:
+      u8g_com_arduino_parallel_write(u8g, arg_val);
+      break;
+    case U8G_COM_MSG_WRITE_SEQ:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_arduino_parallel_write(u8g, *ptr++);
+          arg_val--;
+        }
+      }
+      break;
+    case U8G_COM_MSG_WRITE_SEQ_P:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_arduino_parallel_write(u8g, u8g_pgm_read(ptr));
+          ptr++;
+          arg_val--;
+        }
+      }
+      break;
+    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+      u8g_com_arduino_digital_write(u8g, U8G_PI_DI, arg_val);
+      break;
+    case U8G_COM_MSG_RESET:
+      if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
+        u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
+      break;
+      
+  }
+  return 1;
+}
+
+#else
+
+
+uint8_t u8g_com_arduino_parallel_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  return 1;
+}
+
+#endif /* ARDUINO */
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_arduino_port_d_wr.c

@@ -0,0 +1,168 @@
+/*
+  
+  u8g_arduino_port_d_wr.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+
+  Assumes PORTD for 8 bit data transfer.
+  EN is assumed to be a low active write signal (WR)
+
+  ILI9325D_320x240 from iteadstudio.com
+  RS=19, WR=18, CS=17, RST=16
+
+  
+  u8g_Init8Bit(u8g, dev, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, cs2, di, rw, reset)
+  u8g_Init8Bit(u8g, dev,  8,    9, 10, 11,   4,   5,   6,   7, 18, 14, 15, 17, 16, U8G_PIN_NONE)
+
+*/
+
+#include "u8g.h"
+
+
+#if  defined(ARDUINO) && defined(PORTD)
+
+#if ARDUINO < 100 
+#include <WProgram.h> 
+#else 
+#include <Arduino.h> 
+#endif
+
+
+
+
+
+
+static void u8g_com_arduino_port_d_8bit_wr(u8g_t *u8g, uint8_t val)
+{
+  PORTD = val;
+  
+  /* WR cycle time must be 1 micro second, digitalWrite is slow enough to do this */
+  u8g_com_arduino_digital_write(u8g, U8G_PI_EN, LOW);
+  u8g_com_arduino_digital_write(u8g, U8G_PI_EN, HIGH);
+}
+
+
+uint8_t u8g_com_arduino_port_d_wr_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+
+  switch(msg)
+  {
+    case U8G_COM_MSG_INIT:
+
+#ifdef UCSR0B
+      UCSR0B = 0;  // disable USART 0
+#endif
+      DDRD = 0x0ff;
+      PORTD = 0x0ff;
+
+      /* setup the RW pin as output and force it to low */
+      if ( u8g->pin_list[U8G_PI_RW] != U8G_PIN_NONE )
+      {
+        pinMode(u8g->pin_list[U8G_PI_RW], OUTPUT);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_RW, HIGH);
+      }
+      /* set all pins (except RW pin) */
+      u8g_com_arduino_assign_pin_output_high(u8g);
+      u8g_com_arduino_digital_write(u8g, U8G_PI_EN, HIGH);
+      break;
+    case U8G_COM_MSG_STOP:
+      break;
+    case U8G_COM_MSG_CHIP_SELECT:
+      if ( arg_val == 0 )
+      {
+        /* disable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS1, HIGH);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS2, HIGH);
+      }
+      else if ( arg_val == 1 )
+      {
+        /* enable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS1, LOW);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS2, HIGH);
+      }
+      else if ( arg_val == 2 )
+      {
+        /* enable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS1, HIGH);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS2, LOW);
+      }
+      else
+      {
+        /* enable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS1, LOW);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS2, LOW);
+      }
+      break;
+    case U8G_COM_MSG_WRITE_BYTE:
+      u8g_com_arduino_port_d_8bit_wr(u8g, arg_val);
+      break;
+    case U8G_COM_MSG_WRITE_SEQ:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_arduino_port_d_8bit_wr(u8g, *ptr++);
+          arg_val--;
+        }
+      }
+      break;
+    case U8G_COM_MSG_WRITE_SEQ_P:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_arduino_port_d_8bit_wr(u8g, u8g_pgm_read(ptr));
+          ptr++;
+          arg_val--;
+        }
+      }
+      break;
+    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+      u8g_com_arduino_digital_write(u8g, U8G_PI_DI, arg_val);
+      break;
+    case U8G_COM_MSG_RESET:
+      if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
+        u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
+      break;
+  }
+  return 1;
+}
+
+#else
+
+
+uint8_t u8g_com_arduino_port_d_wr_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  return 1;
+}
+
+#endif /* ARDUINO && PORTD */
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_arduino_ssd_i2c.c

@@ -0,0 +1,201 @@
+/*
+  
+  u8g_com_arduino_ssd_i2c.c
+
+  com interface for arduino (AND atmega) and the SSDxxxx chip (SOLOMON) variant 
+  I2C protocol 
+  
+  ToDo: Rename this to u8g_com_avr_ssd_i2c.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  Special pin usage:
+    U8G_PI_I2C_OPTION	additional options
+    U8G_PI_A0_STATE	used to store the last value of the command/data register selection
+    U8G_PI_SET_A0		1: Signal request to update I2C device with new A0_STATE, 0: Do nothing, A0_STATE matches I2C device
+    U8G_PI_SCL		clock line (NOT USED)
+    U8G_PI_SDA		data line (NOT USED)
+    
+    U8G_PI_RESET		reset line (currently disabled, see below)
+
+  Protocol:
+    SLA, Cmd/Data Selection, Arguments
+    The command/data register is selected by a special instruction byte, which is sent after SLA
+    
+    The continue bit is always 0 so that a (re)start is equired for the change from cmd to/data mode
+*/
+
+#include "u8g.h"
+
+#define I2C_SLA		(0x3c*2)
+//#define I2C_CMD_MODE	0x080
+#define I2C_CMD_MODE	0x000
+#define I2C_DATA_MODE	0x040
+
+
+uint8_t u8g_com_arduino_ssd_start_sequence(u8g_t *u8g)
+{
+  /* are we requested to set the a0 state? */
+  if ( u8g->pin_list[U8G_PI_SET_A0] == 0 )
+    return 1;	
+  
+  /* setup bus, might be a repeated start */
+  if ( u8g_i2c_start(I2C_SLA) == 0 )
+    return 0;
+  if ( u8g->pin_list[U8G_PI_A0_STATE] == 0 )
+  {
+    if ( u8g_i2c_send_byte(I2C_CMD_MODE) == 0 )
+      return 0;
+  }
+  else
+  {
+    if ( u8g_i2c_send_byte(I2C_DATA_MODE) == 0 )
+      return 0;
+  }
+  
+  
+  u8g->pin_list[U8G_PI_SET_A0] = 0;
+  return 1;
+}
+
+uint8_t u8g_com_arduino_ssd_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  switch(msg)
+  {
+    case U8G_COM_MSG_INIT:
+      //u8g_com_arduino_digital_write(u8g, U8G_PI_SCL, HIGH);
+      //u8g_com_arduino_digital_write(u8g, U8G_PI_SDA, HIGH);
+      //u8g->pin_list[U8G_PI_A0_STATE] = 0;       /* inital RS state: unknown mode */
+    
+      u8g_i2c_init(u8g->pin_list[U8G_PI_I2C_OPTION]);
+
+      break;
+    
+    case U8G_COM_MSG_STOP:
+      break;
+
+    case U8G_COM_MSG_RESET:
+      /* Currently disabled, but it could be enable. Previous restrictions have been removed */
+      /* u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val); */
+      break;
+      
+    case U8G_COM_MSG_CHIP_SELECT:
+      u8g->pin_list[U8G_PI_A0_STATE] = 0;
+      u8g->pin_list[U8G_PI_SET_A0] = 1;		/* force a0 to set again, also forces start condition */
+      if ( arg_val == 0 )
+      {
+        /* disable chip, send stop condition */
+	u8g_i2c_stop();
+     }
+      else
+      {
+        /* enable, do nothing: any byte writing will trigger the i2c start */
+      }
+      break;
+
+    case U8G_COM_MSG_WRITE_BYTE:
+      //u8g->pin_list[U8G_PI_SET_A0] = 1;
+      if ( u8g_com_arduino_ssd_start_sequence(u8g) == 0 )
+	return u8g_i2c_stop(), 0;
+      if ( u8g_i2c_send_byte(arg_val) == 0 )
+	return u8g_i2c_stop(), 0;
+      // u8g_i2c_stop();
+      break;
+    
+    case U8G_COM_MSG_WRITE_SEQ:
+      //u8g->pin_list[U8G_PI_SET_A0] = 1;
+      if ( u8g_com_arduino_ssd_start_sequence(u8g) == 0 )
+	return u8g_i2c_stop(), 0;
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+	  if ( u8g_i2c_send_byte(*ptr++) == 0 )
+	    return u8g_i2c_stop(), 0;
+          arg_val--;
+        }
+      }
+      // u8g_i2c_stop();
+      break;
+
+    case U8G_COM_MSG_WRITE_SEQ_P:
+      //u8g->pin_list[U8G_PI_SET_A0] = 1;
+      if ( u8g_com_arduino_ssd_start_sequence(u8g) == 0 )
+	return u8g_i2c_stop(), 0;
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+	  if ( u8g_i2c_send_byte(u8g_pgm_read(ptr)) == 0 )
+	    return 0;
+          ptr++;
+          arg_val--;
+        }
+      }
+      // u8g_i2c_stop();
+      break;
+      
+    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+      u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
+      u8g->pin_list[U8G_PI_SET_A0] = 1;		/* force a0 to set again */
+    
+#ifdef OLD_CODE    
+      if ( i2c_state != 0 )
+      {
+	u8g_i2c_stop();
+	i2c_state = 0;
+      }
+
+      if ( u8g_com_arduino_ssd_start_sequence(arg_val) == 0 )
+	return 0;
+    
+      /* setup bus, might be a repeated start */
+      /*
+      if ( u8g_i2c_start(I2C_SLA) == 0 )
+	return 0;
+      if ( arg_val == 0 )
+      {
+	i2c_state = 1;
+	
+	if ( u8g_i2c_send_byte(I2C_CMD_MODE) == 0 )
+	  return 0;
+      }
+      else
+      {
+	i2c_state = 2;
+	if ( u8g_i2c_send_byte(I2C_DATA_MODE) == 0 )
+	  return 0;
+      }
+      */
+#endif
+      break;
+  }
+  return 1;
+}

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_arduino_st7920_hw_spi.c

@@ -0,0 +1,220 @@
+/*
+  
+  u8g_com_arduino_st7920_hw_spi.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+
+  A special HW SPI interface for ST7920 controller
+
+*/
+
+#include "u8g.h"
+
+#if defined(ARDUINO)
+
+#if ARDUINO < 100 
+#include <WProgram.h>    
+#include "wiring_private.h"
+#include "pins_arduino.h"
+
+#else 
+#include <Arduino.h> 
+#include "wiring_private.h"
+#endif
+
+#if defined(__AVR__)
+#define U8G_ARDUINO_ATMEGA_HW_SPI
+
+/* remove the definition for attiny */
+#if __AVR_ARCH__ == 2
+#undef U8G_ATMEGA_HW_SPI
+#endif
+#if __AVR_ARCH__ == 25
+#undef U8G_ATMEGA_HW_SPI
+#endif
+
+#endif
+
+
+#if defined(U8G_ARDUINO_ATMEGA_HW_SPI)
+
+#include <avr/interrupt.h>
+#include <avr/io.h>
+
+static uint8_t u8g_arduino_st7920_hw_spi_shift_out(u8g_t *u8g, uint8_t val) U8G_NOINLINE;
+static uint8_t u8g_arduino_st7920_hw_spi_shift_out(u8g_t *u8g, uint8_t val)
+{
+  /* send data */
+  SPDR = val;
+  /* wait for transmission */
+  while (!(SPSR & (1<<SPIF))) 
+    ;
+  /* clear the SPIF flag by reading SPDR */
+  return  SPDR;
+}
+
+
+static void u8g_com_arduino_st7920_write_byte_hw_spi(u8g_t *u8g, uint8_t rs, uint8_t val) U8G_NOINLINE;
+static void u8g_com_arduino_st7920_write_byte_hw_spi(u8g_t *u8g, uint8_t rs, uint8_t val)
+{
+  uint8_t i;
+
+  if ( rs == 0 )
+  {
+    /* command */
+    u8g_arduino_st7920_hw_spi_shift_out(u8g, 0x0f8);
+  }
+  else if ( rs == 1 )
+  {
+    /* data */
+    u8g_arduino_st7920_hw_spi_shift_out(u8g, 0x0fa);
+  }
+  else
+  {
+    /* do nothing, keep same state */
+  }
+  
+  u8g_arduino_st7920_hw_spi_shift_out(u8g, val & 0x0f0);
+  u8g_arduino_st7920_hw_spi_shift_out(u8g, val << 4);
+
+  for( i = 0; i < 4; i++ )
+    u8g_10MicroDelay();
+}
+
+
+uint8_t u8g_com_arduino_st7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  switch(msg)
+  {
+    case U8G_COM_MSG_INIT:
+      u8g_com_arduino_assign_pin_output_high(u8g);
+      u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
+      
+      DDRB |= _BV(3);          /* D0, MOSI */
+      DDRB |= _BV(5);          /* SCK */
+      DDRB |= _BV(2);		/* slave select */
+    
+      PORTB &= ~_BV(3);        /* D0, MOSI = 0 */
+      PORTB &= ~_BV(5);        /* SCK = 0 */
+
+      /*
+        SPR1 SPR0
+            0	0		fclk/4
+            0	1		fclk/16 
+            1	0		fclk/64  
+            1	1		fclk/128
+      */
+      SPCR = 0;
+      
+      /* 20 Dez 2012: set CPOL and CPHA to 1 !!! */
+      SPCR =  (1<<SPE) | (1<<MSTR)|(0<<SPR1)|(0<<SPR0)|(1<<CPOL)|(1<<CPHA);
+#ifdef U8G_HW_SPI_2X
+      SPSR = (1 << SPI2X);  /* double speed, issue 89 */
+#endif
+      u8g->pin_list[U8G_PI_A0_STATE] = 0;       /* inital RS state: command mode */
+      break;
+    
+    case U8G_COM_MSG_STOP:
+      break;
+
+    case U8G_COM_MSG_RESET:
+      if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
+	u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
+      break;
+      
+    case U8G_COM_MSG_CHIP_SELECT:
+      if ( arg_val == 0 )
+      {
+        /* disable, note: the st7920 has an active high chip select */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
+      }
+      else
+      {
+        /* enable */
+        //u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, LOW);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
+      }
+      break;
+
+    case U8G_COM_MSG_WRITE_BYTE:
+      u8g_com_arduino_st7920_write_byte_hw_spi(u8g,  u8g->pin_list[U8G_PI_A0_STATE], arg_val);
+      // u8g->pin_list[U8G_PI_A0_STATE] = 2; 
+      //u8g_arduino_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], arg_val);
+      break;
+    
+    case U8G_COM_MSG_WRITE_SEQ:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_arduino_st7920_write_byte_hw_spi(u8g, u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
+          // u8g->pin_list[U8G_PI_A0_STATE] = 2; 
+          arg_val--;
+        }
+      }
+      break;
+
+      case U8G_COM_MSG_WRITE_SEQ_P:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_arduino_st7920_write_byte_hw_spi(u8g, u8g->pin_list[U8G_PI_A0_STATE], u8g_pgm_read(ptr) );
+          // u8g->pin_list[U8G_PI_A0_STATE] = 2; 
+          ptr++;
+          arg_val--;
+        }
+      }
+      break;
+      
+    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+      u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
+      break;
+  }
+  return 1;
+}
+
+#else
+
+uint8_t u8g_com_arduino_st7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  return 1;
+}
+#endif
+
+#else /* ARDUINO */
+
+uint8_t u8g_com_arduino_st7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  return 1;
+}
+
+#endif /* ARDUINO */
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_arduino_st7920_spi.c

@@ -0,0 +1,295 @@
+/*
+  
+  u8g_com_arduino_st7920_spi.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+
+  A special SPI interface for ST7920 controller
+
+*/
+
+#include "u8g.h"
+
+#if defined(ARDUINO)
+
+#if ARDUINO < 100 
+#include <WProgram.h>    
+#include "wiring_private.h"
+#include "pins_arduino.h"
+
+#else 
+#include <Arduino.h> 
+#include "wiring_private.h"
+#endif
+
+#if defined(__AVR__)
+
+uint8_t u8g_bitData, u8g_bitNotData;
+uint8_t u8g_bitClock, u8g_bitNotClock;
+volatile uint8_t *u8g_outData;
+volatile uint8_t *u8g_outClock;
+
+static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin)
+{
+  u8g_outData = portOutputRegister(digitalPinToPort(dataPin));
+  u8g_outClock = portOutputRegister(digitalPinToPort(clockPin));
+  u8g_bitData = digitalPinToBitMask(dataPin);
+  u8g_bitClock = digitalPinToBitMask(clockPin);
+
+  u8g_bitNotClock = u8g_bitClock;
+  u8g_bitNotClock ^= 0x0ff;
+
+  u8g_bitNotData = u8g_bitData;
+  u8g_bitNotData ^= 0x0ff;
+}
+
+static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val) U8G_NOINLINE;
+static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
+{
+  uint8_t cnt = 8;
+  uint8_t bitData = u8g_bitData;
+  uint8_t bitNotData = u8g_bitNotData;
+  uint8_t bitClock = u8g_bitClock;
+  uint8_t bitNotClock = u8g_bitNotClock;
+  volatile uint8_t *outData = u8g_outData;
+  volatile uint8_t *outClock = u8g_outClock;
+  do
+  {
+    if ( val & 128 )
+      *outData |= bitData;
+    else
+      *outData &= bitNotData;
+
+    /*
+    *outClock |= bitClock;
+    val <<= 1;
+    cnt--;
+    *outClock &= bitNotClock;
+    */
+
+    val <<= 1;
+    *outClock &= bitNotClock;
+    cnt--;
+    // removed micro delays, because AVRs are too slow and the delay is not required
+    //u8g_MicroDelay();
+    *outClock |= bitClock;
+    //u8g_MicroDelay();
+  } while( cnt != 0 );
+}
+
+#elif defined(__18CXX) || defined(__PIC32MX)
+
+uint16_t dog_bitData, dog_bitNotData;
+uint16_t dog_bitClock, dog_bitNotClock;
+volatile uint32_t *dog_outData;
+volatile uint32_t *dog_outClock;
+volatile uint32_t dog_pic32_spi_tmp;
+
+static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin)
+{
+  dog_outData = portOutputRegister(digitalPinToPort(dataPin));
+  dog_outClock = portOutputRegister(digitalPinToPort(clockPin));
+  dog_bitData = digitalPinToBitMask(dataPin);
+  dog_bitClock = digitalPinToBitMask(clockPin);
+
+  dog_bitNotClock = dog_bitClock;
+  dog_bitNotClock ^= 0x0ffff;
+
+  dog_bitNotData = dog_bitData;
+  dog_bitNotData ^= 0x0ffff;
+}
+
+static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
+{
+  uint8_t cnt = 8;
+  do
+  {
+    if ( val & 128 )
+	*dog_outData |= dog_bitData;
+    else
+	*dog_outData &= dog_bitNotData;    
+    val <<= 1;
+    //u8g_MicroDelay();
+    //*dog_outClock |= dog_bitClock;
+    *dog_outClock &= dog_bitNotClock;
+    cnt--;
+    u8g_MicroDelay();
+    //*dog_outClock &= dog_bitNotClock;
+    *dog_outClock |= dog_bitClock;
+    u8g_MicroDelay();
+    
+  } while( cnt != 0 );
+}
+
+#else
+
+/* default interface, Arduino DUE (__arm__) */
+
+uint8_t u8g_data_pin;
+uint8_t u8g_clock_pin;
+
+static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin)
+{
+  u8g_data_pin = dataPin;
+  u8g_clock_pin = clockPin;
+}
+
+static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
+{
+  uint8_t cnt = 8;
+  do
+  {
+    if ( val & 128 )
+	digitalWrite(u8g_data_pin, HIGH);
+    else
+	digitalWrite(u8g_data_pin, LOW);
+    val <<= 1;
+    //u8g_MicroDelay();
+    digitalWrite(u8g_clock_pin, LOW);
+    cnt--;
+    u8g_MicroDelay();
+    digitalWrite(u8g_clock_pin, HIGH);
+    u8g_MicroDelay();    
+  } while( cnt != 0 );
+}
+
+#endif 
+
+
+
+
+static void u8g_com_arduino_st7920_write_byte(uint8_t rs, uint8_t val)
+{
+  uint8_t i;
+
+  if ( rs == 0 )
+  {
+    /* command */
+    u8g_com_arduino_do_shift_out_msb_first(0x0f8);
+  }
+  else if ( rs == 1 )
+  {
+    /* data */
+    u8g_com_arduino_do_shift_out_msb_first(0x0fa);
+  }
+  
+  u8g_com_arduino_do_shift_out_msb_first(val & 0x0f0);
+  u8g_com_arduino_do_shift_out_msb_first(val << 4);
+  
+  for( i = 0; i < 4; i++ )
+    u8g_10MicroDelay();
+    
+}
+
+
+
+uint8_t u8g_com_arduino_st7920_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  switch(msg)
+  {
+    case U8G_COM_MSG_INIT:
+      u8g_com_arduino_assign_pin_output_high(u8g);
+      u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
+      // u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, LOW);
+      u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, HIGH);
+      u8g_com_arduino_digital_write(u8g, U8G_PI_MOSI, LOW);
+      u8g_com_arduino_init_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK]);
+      u8g->pin_list[U8G_PI_A0_STATE] = 0;       /* inital RS state: command mode */
+      break;
+    
+    case U8G_COM_MSG_STOP:
+      break;
+
+    case U8G_COM_MSG_RESET:
+      if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
+	u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
+      break;
+      
+    case U8G_COM_MSG_CHIP_SELECT:
+      if ( arg_val == 0 )
+      {
+        /* disable, note: the st7920 has an active high chip select */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
+      }
+      else
+      {
+        /* enable */
+        //u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, HIGH);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
+      }
+      break;
+
+    case U8G_COM_MSG_WRITE_BYTE:
+      u8g_com_arduino_st7920_write_byte( u8g->pin_list[U8G_PI_A0_STATE], arg_val);
+      //u8g->pin_list[U8G_PI_A0_STATE] = 2; 
+      //u8g_arduino_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], arg_val);
+      break;
+    
+    case U8G_COM_MSG_WRITE_SEQ:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_arduino_st7920_write_byte(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
+          //u8g->pin_list[U8G_PI_A0_STATE] = 2; 
+          arg_val--;
+        }
+      }
+      break;
+
+      case U8G_COM_MSG_WRITE_SEQ_P:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_arduino_st7920_write_byte(u8g->pin_list[U8G_PI_A0_STATE], u8g_pgm_read(ptr) );
+          //u8g->pin_list[U8G_PI_A0_STATE] = 2; 
+          ptr++;
+          arg_val--;
+        }
+      }
+      break;
+      
+    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+      u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
+      break;
+  }
+  return 1;
+}
+
+#else /* ARDUINO */
+
+uint8_t u8g_com_arduino_st7920_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  return 1;
+}
+
+#endif /* ARDUINO */
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_arduino_std_sw_spi.c

@@ -0,0 +1,144 @@
+/*
+  
+  u8g_arduino_std_sw_spi.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+
+*/
+
+#include "u8g.h"
+
+
+#if defined(ARDUINO)
+
+#if ARDUINO < 100 
+#include <WProgram.h>
+#else 
+#include <Arduino.h> 
+#endif
+
+void u8g_arduino_sw_spi_shift_out(uint8_t dataPin, uint8_t clockPin, uint8_t val)
+{
+  uint8_t i = 8;
+  do
+  {
+    if ( val & 128 )
+      digitalWrite(dataPin, HIGH);
+    else
+      digitalWrite(dataPin, LOW);
+    val <<= 1;
+    u8g_MicroDelay();		/* 23 Sep 2012 */
+    //delay(1);
+    digitalWrite(clockPin, HIGH);
+    u8g_MicroDelay();		/* 23 Sep 2012 */
+    //delay(1);
+    digitalWrite(clockPin, LOW);		
+    u8g_MicroDelay();		/* 23 Sep 2012 */
+    //delay(1);
+    i--;
+  } while( i != 0 );
+}
+
+uint8_t u8g_com_arduino_std_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  switch(msg)
+  {
+    case U8G_COM_MSG_INIT:
+      u8g_com_arduino_assign_pin_output_high(u8g);
+      u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, LOW);
+      u8g_com_arduino_digital_write(u8g, U8G_PI_MOSI, LOW);
+      break;
+    
+    case U8G_COM_MSG_STOP:
+      break;
+
+    case U8G_COM_MSG_RESET:
+      if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
+        u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
+      break;
+      
+    case U8G_COM_MSG_CHIP_SELECT:
+      if ( arg_val == 0 )
+      {
+        /* disable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
+      }
+      else
+      {
+        /* enable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, LOW);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
+      }
+      break;
+
+    case U8G_COM_MSG_WRITE_BYTE:
+      u8g_arduino_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], arg_val);
+      break;
+    
+    case U8G_COM_MSG_WRITE_SEQ:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_arduino_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], *ptr++);
+          arg_val--;
+        }
+      }
+      break;
+
+      case U8G_COM_MSG_WRITE_SEQ_P:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_arduino_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], u8g_pgm_read(ptr));
+          ptr++;
+          arg_val--;
+        }
+      }
+      break;
+      
+    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+      u8g_com_arduino_digital_write(u8g, U8G_PI_A0, arg_val);
+      break;
+  }
+  return 1;
+}
+
+#else /* ARDUINO */
+
+uint8_t u8g_com_arduino_std_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  return 1;
+}
+
+#endif /* ARDUINO */
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_arduino_sw_spi.c

@@ -0,0 +1,239 @@
+/*
+  
+  u8g_arduino_sw_spi.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+
+*/
+
+#include "u8g.h"
+
+#if defined(ARDUINO)
+
+#if ARDUINO < 100 
+#include <WProgram.h>    
+#include "wiring_private.h"
+#include "pins_arduino.h"
+
+#else 
+#include <Arduino.h> 
+#include "wiring_private.h"
+#endif
+
+#if defined(__AVR__)
+
+uint8_t u8g_bitData, u8g_bitNotData;
+uint8_t u8g_bitClock, u8g_bitNotClock;
+volatile uint8_t *u8g_outData;
+volatile uint8_t *u8g_outClock;
+
+static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin)
+{
+  u8g_outData = portOutputRegister(digitalPinToPort(dataPin));
+  u8g_outClock = portOutputRegister(digitalPinToPort(clockPin));
+  u8g_bitData = digitalPinToBitMask(dataPin);
+  u8g_bitClock = digitalPinToBitMask(clockPin);
+
+  u8g_bitNotClock = u8g_bitClock;
+  u8g_bitNotClock ^= 0x0ff;
+
+  u8g_bitNotData = u8g_bitData;
+  u8g_bitNotData ^= 0x0ff;
+}
+
+static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val) U8G_NOINLINE;
+static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
+{
+  uint8_t cnt = 8;
+  uint8_t bitData = u8g_bitData;
+  uint8_t bitNotData = u8g_bitNotData;
+  uint8_t bitClock = u8g_bitClock;
+  uint8_t bitNotClock = u8g_bitNotClock;
+  volatile uint8_t *outData = u8g_outData;
+  volatile uint8_t *outClock = u8g_outClock;
+  do
+  {
+    if ( val & 128 )
+      *outData |= bitData;
+    else
+      *outData &= bitNotData;
+   
+    *outClock |= bitClock;
+    val <<= 1;
+    cnt--;
+    *outClock &= bitNotClock;
+  } while( cnt != 0 );
+}
+
+#elif defined(__18CXX) || defined(__PIC32MX)
+
+uint16_t dog_bitData, dog_bitNotData;
+uint16_t dog_bitClock, dog_bitNotClock;
+volatile uint32_t *dog_outData;
+volatile uint32_t *dog_outClock;
+volatile uint32_t dog_pic32_spi_tmp;
+
+static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin)
+{
+  dog_outData = portOutputRegister(digitalPinToPort(dataPin));
+  dog_outClock = portOutputRegister(digitalPinToPort(clockPin));
+  dog_bitData = digitalPinToBitMask(dataPin);
+  dog_bitClock = digitalPinToBitMask(clockPin);
+
+  dog_bitNotClock = dog_bitClock;
+  dog_bitNotClock ^= 0x0ffff;
+
+  dog_bitNotData = dog_bitData;
+  dog_bitNotData ^= 0x0ffff;
+}
+
+static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
+{
+  uint8_t cnt = 8;
+  do
+  {
+    if ( val & 128 )
+	*dog_outData |= dog_bitData;
+    else
+	*dog_outData &= dog_bitNotData;    
+    val <<= 1;
+    /*
+	There must be some delay here. However
+	fetching the adress dog_outClock is enough delay, so
+	do not place dog_outClock in a local variable. This will
+	break the procedure
+    */
+    *dog_outClock |= dog_bitClock;
+    cnt--;
+    *dog_outClock &= dog_bitNotClock;
+    /* 
+	little additional delay after clk pulse, done by 3x32bit reads 
+	from I/O. Optimized for PIC32 with 80 MHz.
+    */
+    dog_pic32_spi_tmp = *dog_outClock;
+    dog_pic32_spi_tmp = *dog_outClock;
+    dog_pic32_spi_tmp = *dog_outClock;
+  } while( cnt != 0 );
+}
+
+#else
+/* empty interface */
+
+static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin)
+{
+}
+
+static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
+{
+}
+
+#endif 
+
+
+uint8_t u8g_com_arduino_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  switch(msg)
+  {
+    case U8G_COM_MSG_INIT:
+      u8g_com_arduino_assign_pin_output_high(u8g);
+      u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, LOW);
+      u8g_com_arduino_digital_write(u8g, U8G_PI_MOSI, LOW);
+      u8g_com_arduino_init_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK]);
+      break;
+    
+    case U8G_COM_MSG_STOP:
+      break;
+
+    case U8G_COM_MSG_RESET:
+      if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
+        u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
+      break;
+      
+    case U8G_COM_MSG_CHIP_SELECT:
+      if ( arg_val == 0 )
+      {
+        /* disable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
+      }
+      else
+      {
+        /* enable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, LOW);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
+      }
+      break;
+
+    case U8G_COM_MSG_WRITE_BYTE:
+      u8g_com_arduino_do_shift_out_msb_first( arg_val );
+      //u8g_arduino_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], arg_val);
+      break;
+    
+    case U8G_COM_MSG_WRITE_SEQ:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_arduino_do_shift_out_msb_first(*ptr++);
+          // u8g_arduino_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], *ptr++);
+          arg_val--;
+        }
+      }
+      break;
+
+      case U8G_COM_MSG_WRITE_SEQ_P:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_arduino_do_shift_out_msb_first( u8g_pgm_read(ptr) );
+          //u8g_arduino_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], u8g_pgm_read(ptr));
+          ptr++;
+          arg_val--;
+        }
+      }
+      break;
+      
+    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+      u8g_com_arduino_digital_write(u8g, U8G_PI_A0, arg_val);
+      break;
+  }
+  return 1;
+}
+
+#else /* ARDUINO */
+
+uint8_t u8g_com_arduino_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  return 1;
+}
+
+#endif /* ARDUINO */
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_arduino_t6963.c

@@ -0,0 +1,385 @@
+/*
+  
+  u8g_com_arduino_t6963.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+
+
+  PIN_D0 8
+  PIN_D1 9
+  PIN_D2 10
+  PIN_D3 11
+  PIN_D4 4
+  PIN_D5 5
+  PIN_D6 6
+  PIN_D7 7
+
+  PIN_CS 14
+  PIN_A0 15
+  PIN_RESET 16
+  PIN_WR 17
+  PIN_RD 18
+  
+  u8g_InitRW8Bit(u8g, dev, d0, d1, d2, d3, d4, d5, d6, d7, cs, a0, wr, rd, reset)
+  u8g_InitRW8Bit(u8g, dev,  8,  9, 10, 11,  4,  5,  6,  7, 14, 15, 17, 18, 16)
+
+*/
+
+#include "u8g.h"
+
+#if  defined(ARDUINO)
+
+#if ARDUINO < 100 
+//#include <WProgram.h> 
+#include <wiring_private.h> 
+#include <pins_arduino.h> 
+#else 
+#include <Arduino.h> 
+#endif
+
+
+#if defined(__PIC32MX)
+/* CHIPKIT PIC32 */
+static volatile uint32_t *u8g_output_data_port[8];
+static volatile uint32_t *u8g_input_data_port[8];
+static volatile uint32_t *u8g_mode_port[8];
+static uint32_t u8g_data_mask[8];
+#else
+static volatile uint8_t *u8g_output_data_port[8];
+static volatile uint8_t *u8g_input_data_port[8];
+static volatile uint8_t *u8g_mode_port[8];
+static uint8_t u8g_data_mask[8];
+#endif
+
+
+
+static void u8g_com_arduino_t6963_init(u8g_t *u8g)
+{
+  u8g_output_data_port[0] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D0]));
+  u8g_input_data_port[0] =  portInputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D0]));
+  u8g_mode_port[0] =  portModeRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D0]));
+  u8g_data_mask[0] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D0]);
+  
+  u8g_output_data_port[1] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D1]));
+  u8g_input_data_port[1] =  portInputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D1]));
+  u8g_mode_port[1] =  portModeRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D1]));
+  u8g_data_mask[1] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D1]);
+  
+  u8g_output_data_port[2] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D2]));
+  u8g_input_data_port[2] =  portInputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D2]));
+  u8g_mode_port[2] =  portModeRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D2]));
+  u8g_data_mask[2] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D2]);
+  
+  u8g_output_data_port[3] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D3]));
+  u8g_input_data_port[3] =  portInputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D3]));
+  u8g_mode_port[3] =  portModeRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D3]));
+  u8g_data_mask[3] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D3]);
+  
+  u8g_output_data_port[4] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D4]));
+  u8g_input_data_port[4] =  portInputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D4]));
+  u8g_mode_port[4] =  portModeRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D4]));
+  u8g_data_mask[4] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D4]);
+  
+  u8g_output_data_port[5] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D5]));
+  u8g_input_data_port[5] =  portInputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D5]));
+  u8g_mode_port[5] =  portModeRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D5]));
+  u8g_data_mask[5] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D5]);
+  
+  u8g_output_data_port[6] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D6]));
+  u8g_input_data_port[6] =  portInputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D6]));
+  u8g_mode_port[6] =  portModeRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D6]));
+  u8g_data_mask[6] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D6]);
+  
+  u8g_output_data_port[7] =  portOutputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D7]));
+  u8g_input_data_port[7] =  portInputRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D7]));
+  u8g_mode_port[7] =  portModeRegister(digitalPinToPort(u8g->pin_list[U8G_PI_D7]));
+  u8g_data_mask[7] =  digitalPinToBitMask(u8g->pin_list[U8G_PI_D7]);  
+}
+
+static void u8g_com_arduino_t6963_write_data_pin(uint8_t pin, uint8_t val)
+{
+  if ( val != 0 )
+    *u8g_output_data_port[pin] |= u8g_data_mask[pin];
+  else
+    *u8g_output_data_port[pin] &= ~u8g_data_mask[pin];
+}
+
+static void u8g_com_arduino_t6963_set_port_output(void)
+{
+  uint8_t i;
+  for( i = 0; i < 8; i++ )
+  {
+#if defined(__PIC32MX)
+/* CHIPKIT PIC32 */
+      *u8g_mode_port[i] |= u8g_data_mask[i]; 
+#elif defined(__AVR__)
+      *u8g_mode_port[i] |= u8g_data_mask[i]; 
+#else
+      /* TODO: use generic Arduino API */
+      *u8g_mode_port[i] |= u8g_data_mask[i]; 
+#endif
+
+  }
+}
+
+static void u8g_com_arduino_t6963_set_port_input(void)
+{
+  uint8_t i;
+  for( i = 0; i < 8; i++ )
+  {
+#if defined(__PIC32MX)
+/* CHIPKIT PIC32 */
+      *u8g_mode_port[i] &= ~u8g_data_mask[i]; 
+#elif defined(__AVR__)
+/* avr */
+      *u8g_mode_port[i] &= ~u8g_data_mask[i]; 
+      *u8g_output_data_port[i] &= ~u8g_data_mask[i]; 	// no pullup
+#else
+      /* TODO: use generic Arduino API */
+      *u8g_mode_port[i] &= ~u8g_data_mask[i]; 
+      *u8g_output_data_port[i] &= ~u8g_data_mask[i]; 	// no pullup
+#endif
+  }
+}
+
+
+static void u8g_com_arduino_t6963_write(u8g_t *u8g, uint8_t val)
+{
+  u8g_com_arduino_t6963_write_data_pin( 0, val&1 );
+  val >>= 1;
+  u8g_com_arduino_t6963_write_data_pin( 1, val&1 );
+  val >>= 1;
+  u8g_com_arduino_t6963_write_data_pin( 2, val&1 );
+  val >>= 1;
+  u8g_com_arduino_t6963_write_data_pin( 3, val&1 );
+  val >>= 1;
+
+  u8g_com_arduino_t6963_write_data_pin( 4, val&1 );
+  val >>= 1;
+  u8g_com_arduino_t6963_write_data_pin( 5, val&1 );
+  val >>= 1;
+  u8g_com_arduino_t6963_write_data_pin( 6, val&1 );
+  val >>= 1;
+  u8g_com_arduino_t6963_write_data_pin( 7, val&1 );
+  val >>= 1;
+  
+  u8g_com_arduino_digital_write(u8g, U8G_PI_WR, 0);
+  u8g_MicroDelay(); /* 80ns, reference: t6963 datasheet */
+  u8g_com_arduino_digital_write(u8g, U8G_PI_WR, 1);
+  u8g_MicroDelay(); /* 10ns, reference: t6963 datasheet */
+}
+
+static uint8_t u8g_com_arduino_t6963_read(u8g_t *u8g)
+{
+  uint8_t val = 0;
+  
+  u8g_com_arduino_digital_write(u8g, U8G_PI_RD, 0);
+  u8g_MicroDelay(); /* 150ns, reference: t6963 datasheet */
+  
+  /* only read bits 0, 1 and 3 */
+  if ( (*u8g_input_data_port[3] & u8g_data_mask[3]) != 0 )
+    val++;
+  val <<= 1;
+  val <<= 1;
+  if ( (*u8g_input_data_port[1] & u8g_data_mask[1]) != 0 )
+    val++;
+  val <<= 1;
+  if ( (*u8g_input_data_port[0] & u8g_data_mask[0]) != 0 )
+    val++;
+    
+  u8g_com_arduino_digital_write(u8g, U8G_PI_RD, 1);
+  u8g_MicroDelay(); /* 10ns, reference: t6963 datasheet */
+  
+  return val;
+}
+
+#define U8G_STATUS_TIMEOUT 50
+
+static uint8_t u8g_com_arduino_t6963_until_01_ok(u8g_t *u8g)
+{
+  long x;
+  
+  u8g_com_arduino_t6963_set_port_input();
+  x = millis();
+  x += U8G_STATUS_TIMEOUT;
+
+  for(;;)
+  {    
+    if ( (u8g_com_arduino_t6963_read(u8g) & 3) == 3 )
+      break;
+    if ( x < millis() )
+      return 0;
+  }
+  u8g_com_arduino_t6963_set_port_output();
+  return 1;
+}
+
+static uint8_t u8g_com_arduino_t6963_until_3_ok(u8g_t *u8g)
+{
+  long x;
+  
+  u8g_com_arduino_t6963_set_port_input();
+  x = millis();
+  x += U8G_STATUS_TIMEOUT;
+
+  for(;;)
+  {    
+    if ( (u8g_com_arduino_t6963_read(u8g) & 8) == 8 )
+      break;
+    if ( x < millis() )
+      return 0;
+  }
+  u8g_com_arduino_t6963_set_port_output();
+  return 1;
+}
+
+static uint8_t u8g_com_arduino_t6963_write_cmd(u8g_t *u8g, uint8_t val)
+{
+  u8g_com_arduino_digital_write(u8g, U8G_PI_A0, 1);
+  if ( u8g_com_arduino_t6963_until_01_ok(u8g) == 0 )
+    return 0;
+  u8g_com_arduino_digital_write(u8g, U8G_PI_A0, 1);
+  u8g_com_arduino_t6963_write(u8g, val);
+  return 1;  
+}
+
+static uint8_t u8g_com_arduino_t6963_write_data(u8g_t *u8g, uint8_t val)
+{
+  u8g_com_arduino_digital_write(u8g, U8G_PI_A0, 1);
+  if ( u8g_com_arduino_t6963_until_01_ok(u8g) == 0 )
+    return 0;
+  u8g_com_arduino_digital_write(u8g, U8G_PI_A0, 0);
+  u8g_com_arduino_t6963_write(u8g, val);
+  return 1;  
+}
+
+static uint8_t u8g_com_arduino_t6963_write_auto_data(u8g_t *u8g, uint8_t val)
+{
+  u8g_com_arduino_digital_write(u8g, U8G_PI_A0, 1);
+  if ( u8g_com_arduino_t6963_until_3_ok(u8g) == 0 )
+    return 0;
+  u8g_com_arduino_digital_write(u8g, U8G_PI_A0, 0);
+  u8g_com_arduino_t6963_write(u8g, val);
+  return 1;  
+}
+
+
+uint8_t u8g_com_arduino_t6963_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  switch(msg)
+  {
+    case U8G_COM_MSG_INIT:
+      u8g->pin_list[U8G_PI_A0_STATE] = 0;
+      u8g_com_arduino_t6963_init(u8g);
+      /* setup the RW (equal to WR) pin as output and force it to high */
+      if ( u8g->pin_list[U8G_PI_WR] != U8G_PIN_NONE )
+      {
+        pinMode(u8g->pin_list[U8G_PI_WR], OUTPUT);
+        u8g_com_arduino_digital_write(u8g, U8G_PI_WR, HIGH);
+      }
+      /* set all pins (except WR pin) */
+      u8g_com_arduino_assign_pin_output_high(u8g);
+      break;
+    case U8G_COM_MSG_STOP:
+      break;
+
+    case U8G_COM_MSG_CHIP_SELECT:
+      if ( arg_val == 0 )
+      {
+        /* disable, active low chip select */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
+      }
+      else
+      {
+        /* enable */
+        u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
+      }
+      break;
+    case U8G_COM_MSG_WRITE_BYTE:
+      if ( u8g->pin_list[U8G_PI_A0_STATE] == 0 )
+      {
+	u8g_com_arduino_t6963_write_data(u8g, arg_val);
+      }
+      else
+      {
+	u8g_com_arduino_t6963_write_cmd(u8g, arg_val);
+      }
+      break;
+    case U8G_COM_MSG_WRITE_SEQ:
+      {
+        register uint8_t *ptr = arg_ptr;
+	u8g_com_arduino_t6963_write_cmd(u8g, 0x0b0);	/* auto write */
+        while( arg_val > 0 )
+        {
+          if ( u8g_com_arduino_t6963_write_auto_data(u8g, *ptr++) == 0 )
+	    break;
+          arg_val--;
+        }
+	u8g_com_arduino_t6963_write_cmd(u8g, 0x0b2);	/* auto reset */
+      }
+      break;
+    case U8G_COM_MSG_WRITE_SEQ_P:
+      {
+        register uint8_t *ptr = arg_ptr;
+	u8g_com_arduino_t6963_write_cmd(u8g, 0x0b0);	/* auto write */
+        while( arg_val > 0 )
+        {
+          if ( u8g_com_arduino_t6963_write_auto_data(u8g, u8g_pgm_read(ptr)) == 0 )
+	    break;
+          ptr++;
+          arg_val--;
+        }
+	u8g_com_arduino_t6963_write_cmd(u8g, 0x0b2);	/* auto reset */
+      }
+      break;
+    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 1) or data mode (arg_val = 0) */
+      u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
+      //u8g_com_arduino_digital_write(u8g, U8G_PI_DI, arg_val);
+      break;
+    case U8G_COM_MSG_RESET:
+      if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
+        u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
+      break;
+      
+  }
+  return 1;
+}
+
+#else
+
+
+uint8_t u8g_com_arduino_t6963_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  return 1;
+}
+
+
+#endif /* ARDUINO */
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_atmega_hw_spi.c

@@ -0,0 +1,174 @@
+/*
+  
+  u8g_com_atmega_hw_spi.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+  Assumes, that 
+    MOSI is at PORTB, Pin 3
+  and
+    SCK is at PORTB, Pin 5
+
+*/
+
+#include "u8g.h"
+
+
+#if defined(__AVR__)
+#define U8G_ATMEGA_HW_SPI
+
+/* remove the definition for attiny */
+#if __AVR_ARCH__ == 2
+#undef U8G_ATMEGA_HW_SPI
+#endif
+#if __AVR_ARCH__ == 25
+#undef U8G_ATMEGA_HW_SPI
+#endif
+#endif
+
+
+#if defined(U8G_ATMEGA_HW_SPI)
+
+#include <avr/interrupt.h>
+#include <avr/io.h>
+
+
+static uint8_t u8g_atmega_spi_out(uint8_t data)
+{
+  /* unsigned char x = 100; */
+  /* send data */
+  SPDR = data;
+  /* wait for transmission */
+  while (!(SPSR & (1<<SPIF))) 
+    ;
+  /* clear the SPIF flag by reading SPDR */
+  return  SPDR;
+}
+
+
+uint8_t u8g_com_atmega_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  switch(msg)
+  {
+    case U8G_COM_MSG_STOP:
+      break;
+    
+    case U8G_COM_MSG_INIT:
+
+      u8g_SetPIOutput(u8g, U8G_PI_CS);
+      u8g_SetPIOutput(u8g, U8G_PI_A0);
+      
+      DDRB |= _BV(3);          /* D0, MOSI */
+      DDRB |= _BV(5);          /* SCK */
+      DDRB |= _BV(2);		/* slave select */
+    
+      PORTB &= ~_BV(3);        /* D0, MOSI = 0 */
+      PORTB &= ~_BV(5);        /* SCK = 0 */
+      u8g_SetPILevel(u8g, U8G_PI_CS, 1);
+
+      /*
+        SPR1 SPR0
+            0	0		fclk/4    x
+            0	1		fclk/16
+            1	0		fclk/64      
+            1	1		fclk/128
+      */
+      SPCR = 0;
+      SPCR =  (1<<SPE) | (1<<MSTR)|(0<<SPR1)|(0<<SPR0)|(0<<CPOL)|(0<<CPHA);
+#ifdef U8G_HW_SPI_2X
+      SPSR = (1 << SPI2X);  /* double speed, issue 89 */
+#endif
+
+      break;
+    
+    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+      u8g_SetPILevel(u8g, U8G_PI_A0, arg_val);
+      break;
+
+    case U8G_COM_MSG_CHIP_SELECT:
+      
+      if ( arg_val == 0 )
+      {
+        /* disable */
+        u8g_SetPILevel(u8g, U8G_PI_CS, 1);
+      }
+      else
+      {
+        PORTB &= ~_BV(5);        /* SCK = 0 */
+        /* enable */
+        u8g_SetPILevel(u8g, U8G_PI_CS, 0); /* CS = 0 (low active) */
+      }
+      
+      break;
+      
+    case U8G_COM_MSG_RESET:
+      u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
+      break;
+    
+    case U8G_COM_MSG_WRITE_BYTE:
+      u8g_atmega_spi_out(arg_val);
+      break;
+    
+    case U8G_COM_MSG_WRITE_SEQ:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_atmega_spi_out(*ptr++);
+          arg_val--;
+        }
+      }
+      break;
+    case U8G_COM_MSG_WRITE_SEQ_P:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_atmega_spi_out(u8g_pgm_read(ptr));
+          ptr++;
+          arg_val--;
+        }
+      }
+      break;
+  }
+  return 1;
+}
+
+#else
+
+uint8_t u8g_com_atmega_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  return 1;
+}
+
+#endif
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_atmega_parallel.c

@@ -0,0 +1,183 @@
+/*
+  
+  u8g_atmega_parallel.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+
+  PIN_D0 8
+  PIN_D1 9
+  PIN_D2 10
+  PIN_D3 11
+  PIN_D4 4
+  PIN_D5 5
+  PIN_D6 6
+  PIN_D7 7
+
+  PIN_CS1 14
+  PIN_CS2 15
+  PIN_RW 16
+  PIN_DI 17
+  PIN_EN 18
+  
+  u8g_Init8Bit(u8g, dev, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, cs2, di, rw, reset)
+  u8g_Init8Bit(u8g, dev,  8,    9, 10, 11,   4,   5,   6,   7, 18, 14, 15, 17, 16, U8G_PIN_NONE)
+
+*/
+
+#include "u8g.h"
+
+#if defined(__AVR__)
+
+static void u8g_com_atmega_parallel_write(u8g_t *u8g, uint8_t val) U8G_NOINLINE;
+static void u8g_com_atmega_parallel_write(u8g_t *u8g, uint8_t val)
+{
+
+  u8g_SetPILevel(u8g, U8G_PI_D0, val&1);
+  val >>= 1;
+  u8g_SetPILevel(u8g, U8G_PI_D1, val&1);
+  val >>= 1;
+  u8g_SetPILevel(u8g, U8G_PI_D2, val&1);
+  val >>= 1;
+  u8g_SetPILevel(u8g, U8G_PI_D3, val&1);
+  val >>= 1;
+  u8g_SetPILevel(u8g, U8G_PI_D4, val&1);
+  val >>= 1;
+  u8g_SetPILevel(u8g, U8G_PI_D5, val&1);
+  val >>= 1;
+  u8g_SetPILevel(u8g, U8G_PI_D6, val&1);
+  val >>= 1;
+  u8g_SetPILevel(u8g, U8G_PI_D7, val&1);
+  
+  /* EN cycle time must be 1 micro second  */
+  u8g_SetPILevel(u8g, U8G_PI_EN, 1);
+  u8g_MicroDelay(); /* delay by 1000ns, reference: ST7920: 140ns, SBN1661: 100ns */
+  u8g_SetPILevel(u8g, U8G_PI_EN, 0);
+  u8g_10MicroDelay(); /* ST7920 commands: 72us */
+  u8g_10MicroDelay(); /* ST7920 commands: 72us */
+}
+
+
+uint8_t u8g_com_atmega_parallel_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  switch(msg)
+  {
+    case U8G_COM_MSG_INIT:
+      /* setup the RW pin as output and force it to low */
+      u8g_SetPIOutput(u8g, U8G_PI_RW);
+      u8g_SetPILevel(u8g, U8G_PI_RW, 0);
+
+      u8g_SetPIOutput(u8g, U8G_PI_D0);
+      u8g_SetPIOutput(u8g, U8G_PI_D1);
+      u8g_SetPIOutput(u8g, U8G_PI_D2);
+      u8g_SetPIOutput(u8g, U8G_PI_D3);
+      u8g_SetPIOutput(u8g, U8G_PI_D4);
+      u8g_SetPIOutput(u8g, U8G_PI_D5);
+      u8g_SetPIOutput(u8g, U8G_PI_D6);
+      u8g_SetPIOutput(u8g, U8G_PI_D7);
+      u8g_SetPIOutput(u8g, U8G_PI_EN);
+      u8g_SetPIOutput(u8g, U8G_PI_CS1);
+      u8g_SetPIOutput(u8g, U8G_PI_CS2);
+      u8g_SetPIOutput(u8g, U8G_PI_DI);
+      u8g_SetPILevel(u8g, U8G_PI_CS1, 1);
+      u8g_SetPILevel(u8g, U8G_PI_CS2, 1);
+
+      break;
+    case U8G_COM_MSG_STOP:
+      break;
+    case U8G_COM_MSG_CHIP_SELECT:
+      if ( arg_val == 0 )
+      {
+        /* disable */
+        u8g_SetPILevel(u8g, U8G_PI_CS1, 1);
+        u8g_SetPILevel(u8g, U8G_PI_CS2, 1);
+      }
+      else if ( arg_val == 1 )
+      {
+        /* enable */
+        u8g_SetPILevel(u8g, U8G_PI_CS1, 0);
+        u8g_SetPILevel(u8g, U8G_PI_CS2, 1);
+      }
+      else if ( arg_val == 2 )
+      {
+        /* enable */
+        u8g_SetPILevel(u8g, U8G_PI_CS1, 1);
+        u8g_SetPILevel(u8g, U8G_PI_CS2, 0);
+      }
+      else
+      {
+        /* enable */
+        u8g_SetPILevel(u8g, U8G_PI_CS1, 0);
+        u8g_SetPILevel(u8g, U8G_PI_CS2, 0);
+      }
+      break;
+    case U8G_COM_MSG_WRITE_BYTE:
+      u8g_com_atmega_parallel_write(u8g, arg_val);
+      break;
+    case U8G_COM_MSG_WRITE_SEQ:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_atmega_parallel_write(u8g, *ptr++);
+          arg_val--;
+        }
+      }
+      break;
+    case U8G_COM_MSG_WRITE_SEQ_P:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_atmega_parallel_write(u8g, u8g_pgm_read(ptr));
+          ptr++;
+          arg_val--;
+        }
+      }
+      break;
+    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+      u8g_SetPILevel(u8g, U8G_PI_DI, arg_val);
+      break;
+    case U8G_COM_MSG_RESET:
+      u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
+      break;
+  }
+  return 1;
+}
+
+#else
+
+uint8_t u8g_com_atmega_parallel_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  return 1;
+}
+
+#endif /* ARDUINO */
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_atmega_st7920_hw_spi.c

@@ -0,0 +1,205 @@
+/*
+  
+  u8g_com_atmega_st7920_hw_spi.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+
+  A special SPI interface for ST7920 controller with HW SPI Support
+
+  Assumes, that 
+    MOSI is at PORTB, Pin 3
+  and
+    SCK is at PORTB, Pin 5
+
+
+*/
+
+#include "u8g.h"
+
+#if defined(__AVR__)
+#define U8G_ATMEGA_HW_SPI
+
+/* remove the definition for attiny */
+#if __AVR_ARCH__ == 2
+#undef U8G_ATMEGA_HW_SPI
+#endif
+#if __AVR_ARCH__ == 25
+#undef U8G_ATMEGA_HW_SPI
+#endif
+
+#endif
+
+#if defined(U8G_ATMEGA_HW_SPI)
+
+#include <avr/interrupt.h>
+#include <avr/io.h>
+
+static uint8_t u8g_atmega_st7920_hw_spi_shift_out(u8g_t *u8g, uint8_t val) U8G_NOINLINE;
+static uint8_t u8g_atmega_st7920_hw_spi_shift_out(u8g_t *u8g, uint8_t val)
+{
+  /* send data */
+  SPDR = val;
+  /* wait for transmission */
+  while (!(SPSR & (1<<SPIF))) 
+    ;
+  /* clear the SPIF flag by reading SPDR */
+  return  SPDR;
+}
+
+
+static void u8g_com_atmega_st7920_write_byte_hw_spi(u8g_t *u8g, uint8_t rs, uint8_t val) U8G_NOINLINE;
+static void u8g_com_atmega_st7920_write_byte_hw_spi(u8g_t *u8g, uint8_t rs, uint8_t val)
+{
+  uint8_t i;
+
+  if ( rs == 0 )
+  {
+    /* command */
+    u8g_atmega_st7920_hw_spi_shift_out(u8g, 0x0f8);
+  }
+  else if ( rs == 1 )
+  {
+    /* data */
+    u8g_atmega_st7920_hw_spi_shift_out(u8g, 0x0fa);
+  }
+  
+  u8g_atmega_st7920_hw_spi_shift_out(u8g, val & 0x0f0);
+  u8g_atmega_st7920_hw_spi_shift_out(u8g, val << 4);
+
+  for( i = 0; i < 4; i++ )
+    u8g_10MicroDelay();
+}
+
+
+uint8_t u8g_com_atmega_st7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  switch(msg)
+  {
+    case U8G_COM_MSG_INIT:
+      u8g_SetPIOutput(u8g, U8G_PI_CS);
+      //u8g_SetPIOutput(u8g, U8G_PI_A0);
+      
+      DDRB |= _BV(3);          /* D0, MOSI */
+      DDRB |= _BV(5);          /* SCK */
+      DDRB |= _BV(2);		/* slave select */
+    
+      PORTB &= ~_BV(3);        /* D0, MOSI = 0 */
+      PORTB &= ~_BV(5);        /* SCK = 0 */
+      u8g_SetPILevel(u8g, U8G_PI_CS, 1);
+
+      /*
+        SPR1 SPR0
+            0	0		fclk/4
+            0	1		fclk/16 
+            1	0		fclk/64  
+            1	1		fclk/128
+      */
+      SPCR = 0;
+      
+      /* maybe set CPOL and CPHA to 1 */
+      /* 20 Dez 2012: did set CPOL and CPHA to 1 in Arduino variant! */
+      SPCR =  (1<<SPE) | (1<<MSTR)|(0<<SPR1)|(0<<SPR0)|(0<<CPOL)|(0<<CPHA);
+#ifdef U8G_HW_SPI_2X
+      SPSR = (1 << SPI2X);  /* double speed, issue 89 */
+#endif
+      u8g->pin_list[U8G_PI_A0_STATE] = 0;       /* inital RS state: command mode */
+      break;
+    
+    case U8G_COM_MSG_STOP:
+      break;
+
+    case U8G_COM_MSG_RESET:
+      u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
+      break;
+    
+    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+      u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
+      break;
+
+    case U8G_COM_MSG_CHIP_SELECT:      
+      if ( arg_val == 0 )
+      {
+        /* disable, note: the st7920 has an active high chip select */
+        u8g_SetPILevel(u8g, U8G_PI_CS, 0);
+      }
+      else
+      {
+        /* u8g_SetPILevel(u8g, U8G_PI_SCK, 0 ); */
+        /* enable */
+        u8g_SetPILevel(u8g, U8G_PI_CS, 1); /* CS = 1 (high active) */
+      }
+      break;
+      
+
+    case U8G_COM_MSG_WRITE_BYTE:
+      u8g_com_atmega_st7920_write_byte_hw_spi(u8g, u8g->pin_list[U8G_PI_A0_STATE], arg_val);
+      //u8g->pin_list[U8G_PI_A0_STATE] = 2; 
+      break;
+    
+    case U8G_COM_MSG_WRITE_SEQ:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_atmega_st7920_write_byte_hw_spi(u8g, u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
+	  //u8g->pin_list[U8G_PI_A0_STATE] = 2; 
+          arg_val--;
+        }
+      }
+      break;
+
+      case U8G_COM_MSG_WRITE_SEQ_P:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_atmega_st7920_write_byte_hw_spi(u8g, u8g->pin_list[U8G_PI_A0_STATE], u8g_pgm_read(ptr));
+	  //u8g->pin_list[U8G_PI_A0_STATE] = 2; 
+          ptr++;
+          arg_val--;
+        }
+      }
+      break;
+  }
+  return 1;
+}
+
+#else
+
+
+uint8_t u8g_com_atmega_st7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  return 1;
+}
+
+
+#endif
+
+ 

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_atmega_st7920_spi.c

@@ -0,0 +1,170 @@
+/*
+  
+  u8g_com_atmega_st7920_spi.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+
+  A special SPI interface for ST7920 controller
+
+*/
+
+#include "u8g.h"
+
+#if defined(__AVR__)
+
+static void u8g_atmega_st7920_sw_spi_shift_out(u8g_t *u8g, uint8_t val) U8G_NOINLINE;
+static void u8g_atmega_st7920_sw_spi_shift_out(u8g_t *u8g, uint8_t val)
+{
+  uint8_t i = 8;
+  do
+  {
+    u8g_SetPILevel(u8g, U8G_PI_MOSI, val & 128 );
+    val <<= 1;
+    u8g_SetPILevel(u8g, U8G_PI_SCK, 1 );
+    u8g_MicroDelay();		/* 15 Aug 2012: added for high speed uC */
+    u8g_SetPILevel(u8g, U8G_PI_SCK, 0 );
+    u8g_MicroDelay();		/* 15 Aug 2012: added for high speed uC */
+    i--;
+  } while( i != 0 );
+}
+
+static void u8g_com_atmega_st7920_write_byte(u8g_t *u8g, uint8_t rs, uint8_t val) U8G_NOINLINE;
+static void u8g_com_atmega_st7920_write_byte(u8g_t *u8g, uint8_t rs, uint8_t val)
+{
+  uint8_t i;
+  
+  if ( rs == 0 )
+  {
+    /* command */
+    u8g_atmega_st7920_sw_spi_shift_out(u8g, 0x0f8);
+  }
+  else if ( rs == 1 )
+  {
+    /* data */
+    u8g_atmega_st7920_sw_spi_shift_out(u8g, 0x0fa);
+  }
+  
+  u8g_atmega_st7920_sw_spi_shift_out(u8g, val & 0x0f0);
+  u8g_atmega_st7920_sw_spi_shift_out(u8g, val << 4);
+
+  for( i = 0; i < 4; i++ )
+    u8g_10MicroDelay();
+}
+
+
+uint8_t u8g_com_atmega_st7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  switch(msg)
+  {
+    case U8G_COM_MSG_INIT:
+      u8g_SetPIOutput(u8g, U8G_PI_SCK);
+      u8g_SetPIOutput(u8g, U8G_PI_MOSI);
+      /* u8g_SetPIOutput(u8g, U8G_PI_A0); */
+      u8g_SetPIOutput(u8g, U8G_PI_CS);
+      u8g_SetPIOutput(u8g, U8G_PI_RESET);
+      
+      u8g_SetPILevel(u8g, U8G_PI_SCK, 0 );
+      u8g_SetPILevel(u8g, U8G_PI_MOSI, 0 );
+      u8g_SetPILevel(u8g, U8G_PI_CS, 0 );
+      /* u8g_SetPILevel(u8g, U8G_PI_A0, 0); */
+    
+      u8g->pin_list[U8G_PI_A0_STATE] = 0;       /* inital RS state: command mode */
+      break;
+    
+    case U8G_COM_MSG_STOP:
+      break;
+
+    case U8G_COM_MSG_RESET:
+      u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
+      break;
+    
+    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+      u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
+      break;
+
+    case U8G_COM_MSG_CHIP_SELECT:      
+      if ( arg_val == 0 )
+      {
+        /* disable, note: the st7920 has an active high chip select */
+        u8g_SetPILevel(u8g, U8G_PI_CS, 0);
+      }
+      else
+      {
+        /* u8g_SetPILevel(u8g, U8G_PI_SCK, 0 ); */
+        /* enable */
+        u8g_SetPILevel(u8g, U8G_PI_CS, 1); /* CS = 1 (high active) */
+      }
+      break;
+      
+
+    case U8G_COM_MSG_WRITE_BYTE:
+      u8g_com_atmega_st7920_write_byte(u8g, u8g->pin_list[U8G_PI_A0_STATE], arg_val);
+      u8g->pin_list[U8G_PI_A0_STATE] = 2; 
+      break;
+    
+    case U8G_COM_MSG_WRITE_SEQ:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_atmega_st7920_write_byte(u8g, u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
+	  u8g->pin_list[U8G_PI_A0_STATE] = 2; 
+          arg_val--;
+        }
+      }
+      break;
+
+      case U8G_COM_MSG_WRITE_SEQ_P:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_com_atmega_st7920_write_byte(u8g, u8g->pin_list[U8G_PI_A0_STATE], u8g_pgm_read(ptr));
+	  u8g->pin_list[U8G_PI_A0_STATE] = 2; 
+          ptr++;
+          arg_val--;
+        }
+      }
+      break;
+  }
+  return 1;
+}
+
+#else
+
+
+uint8_t u8g_com_atmega_st7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  return 1;
+}
+
+
+#endif
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_atmega_sw_spi.c

@@ -0,0 +1,141 @@
+/*
+  
+  u8g_com_atmega_sw_spi.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+
+*/
+
+#include "u8g.h"
+
+#if defined(__AVR__)
+
+static void u8g_atmega_sw_spi_shift_out(u8g_t *u8g, uint8_t val) U8G_NOINLINE;
+static void u8g_atmega_sw_spi_shift_out(u8g_t *u8g, uint8_t val)
+{
+  uint8_t i = 8;
+  do
+  {
+    u8g_SetPILevel(u8g, U8G_PI_MOSI, val & 128 );
+    val <<= 1;
+    u8g_SetPILevel(u8g, U8G_PI_SCK, 1 );
+    u8g_MicroDelay();		/* 15 Aug 2012: added for high speed uC */
+    u8g_SetPILevel(u8g, U8G_PI_SCK, 0 );
+    u8g_MicroDelay();		/* 15 Aug 2012: added for high speed uC */
+    i--;
+  } while( i != 0 );
+}
+
+uint8_t u8g_com_atmega_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  switch(msg)
+  {
+    case U8G_COM_MSG_INIT:
+      u8g_SetPIOutput(u8g, U8G_PI_SCK);
+      u8g_SetPIOutput(u8g, U8G_PI_MOSI);
+      u8g_SetPIOutput(u8g, U8G_PI_A0);
+      u8g_SetPIOutput(u8g, U8G_PI_CS);
+      u8g_SetPIOutput(u8g, U8G_PI_RESET);
+      
+      u8g_SetPILevel(u8g, U8G_PI_SCK, 0 );
+      u8g_SetPILevel(u8g, U8G_PI_MOSI, 0 );
+      u8g_SetPILevel(u8g, U8G_PI_CS, 1 );
+      u8g_SetPILevel(u8g, U8G_PI_A0, 0);
+      break;
+    
+    case U8G_COM_MSG_STOP:
+      break;
+
+    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+      u8g_SetPILevel(u8g, U8G_PI_A0, arg_val);
+      break;
+
+    case U8G_COM_MSG_CHIP_SELECT:
+      
+      if ( arg_val == 0 )
+      {
+        /* disable */
+        u8g_SetPILevel(u8g, U8G_PI_CS, 1);
+      }
+      else
+      {
+        u8g_SetPILevel(u8g, U8G_PI_SCK, 0 );
+        /* enable */
+        u8g_SetPILevel(u8g, U8G_PI_CS, 0); /* CS = 0 (low active) */
+      }
+      break;
+      
+    case U8G_COM_MSG_RESET:
+      u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
+      break;
+    
+
+    case U8G_COM_MSG_WRITE_BYTE:
+      u8g_atmega_sw_spi_shift_out(u8g, arg_val);
+      break;
+    
+    case U8G_COM_MSG_WRITE_SEQ:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_atmega_sw_spi_shift_out(u8g, *ptr++);
+          arg_val--;
+        }
+      }
+      break;
+
+      case U8G_COM_MSG_WRITE_SEQ_P:
+      {
+        register uint8_t *ptr = arg_ptr;
+        while( arg_val > 0 )
+        {
+          u8g_atmega_sw_spi_shift_out(u8g, u8g_pgm_read(ptr));
+          ptr++;
+          arg_val--;
+        }
+      }
+      break;
+  }
+  return 1;
+}
+
+#else
+
+
+uint8_t u8g_com_atmega_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  return 1;
+}
+
+
+#endif
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_i2c.c

@@ -0,0 +1,249 @@
+/*
+  
+  u8g_com_i2c.c
+
+  generic i2c interface
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+*/
+
+#include "u8g.h"
+
+static uint8_t u8g_i2c_err_code;
+
+/*
+  position values
+    1: start condition
+    2: sla transfer
+*/
+static uint8_t u8g_i2c_err_pos;
+
+
+void u8g_i2c_clear_error(void)
+{
+  u8g_i2c_err_code = U8G_I2C_ERR_NONE;
+  u8g_i2c_err_pos = 0;
+}
+
+uint8_t  u8g_i2c_get_error(void)
+{
+  return u8g_i2c_err_code;
+}
+
+uint8_t u8g_i2c_get_err_pos(void)
+{
+  return u8g_i2c_err_pos;
+}
+
+static void u8g_i2c_set_error(uint8_t code, uint8_t pos)
+{
+  if ( u8g_i2c_err_code > 0 )
+    return;
+  u8g_i2c_err_code |= code;
+  u8g_i2c_err_pos = pos;
+}
+
+
+
+#if defined(__AVR__)
+#define U8G_ATMEGA_HW_TWI
+
+/* remove the definition for attiny */
+#if __AVR_ARCH__ == 2
+#undef U8G_ATMEGA_HW_TWI
+#endif
+#if __AVR_ARCH__ == 25
+#undef U8G_ATMEGA_HW_TWI
+#endif
+#endif
+
+#if defined(U8G_ATMEGA_HW_TWI)
+
+#include <avr/io.h>
+#include <util/twi.h>
+
+
+
+void u8g_i2c_init(uint8_t options)
+{
+  /*
+  TWBR: bit rate register
+  TWSR: status register (contains preselector bits)
+
+  prescalar
+    0		1
+    1		4
+    2		16
+    3		64
+
+  f = F_CPU/(16+2*TWBR*prescalar)
+  
+  F_CPU = 16MHz
+    TWBR = 152;
+    TWSR = 0;
+	--> 50KHz
+
+    TWBR = 72;
+    TWSR = 0;
+	--> 100KHz
+
+    F_CPU/(2*100000)-8  --> calculate TWBR value for 100KHz
+*/
+  TWSR = 0;
+  TWBR = F_CPU/(2*100000)-8;
+  u8g_i2c_clear_error();
+}
+
+uint8_t u8g_i2c_wait(uint8_t mask, uint8_t pos)
+{
+  volatile uint16_t cnt = 2000;	/* timout value should be > 280 for 50KHz Bus and 16 Mhz CPU, however the start condition might need longer */
+  while( !(TWCR & mask) )
+  {
+      if ( cnt == 0 )
+      {
+	u8g_i2c_set_error(U8G_I2C_ERR_TIMEOUT, pos);
+	return 0; /* error */
+      }
+      cnt--;
+    }
+  return 1;	/* all ok */
+}
+
+/* sla includes all 8 bits (with r/w bit), assums master transmit */
+uint8_t u8g_i2c_start(uint8_t sla)
+{
+  register uint8_t status;
+  
+  /* send start */
+  TWCR = _BV(TWINT) |  _BV(TWSTA)  |  _BV(TWEN);
+   
+  /* wait */
+  if ( u8g_i2c_wait(_BV(TWINT), 1) == 0 )
+    return 0;
+  
+  status = TW_STATUS;
+ 
+  /* check status after start */  
+  if ( status != TW_START && status != TW_REP_START )
+  {
+    u8g_i2c_set_error(U8G_I2C_ERR_BUS, 1);
+    return 0;
+  }
+
+  /* set slave address */  
+  TWDR = sla;
+  
+  /* enable sla transfer */
+  TWCR = _BV(TWINT)  |  _BV(TWEN);
+
+  /* wait */
+  if ( u8g_i2c_wait(_BV(TWINT), 2) == 0 )
+    return 0;
+  status = TW_STATUS;
+
+  /* check status after sla */  
+  if ( status != TW_MT_SLA_ACK )
+  {
+    u8g_i2c_set_error(U8G_I2C_ERR_BUS, 2);
+    return 0;
+  }
+
+   return 1;
+}
+
+uint8_t u8g_i2c_send_byte(uint8_t data)
+{
+  register uint8_t status;
+  TWDR = data;
+  TWCR = _BV(TWINT)  |  _BV(TWEN);
+  if ( u8g_i2c_wait(_BV(TWINT), 3) == 0 )
+    return 0;
+  status = TW_STATUS;
+  
+  if ( status != TW_MT_DATA_ACK )
+  {
+    u8g_i2c_set_error(U8G_I2C_ERR_BUS, 3);
+    return 0;
+  }
+  
+  return 1;  
+}
+
+void u8g_i2c_stop(void)
+{
+  /* write stop */
+  TWCR = _BV(TWINT) | _BV(TWEN) | _BV(TWSTO);
+
+  /* no error is checked for the stop condition */  
+  u8g_i2c_wait(_BV(TWSTO), 4);
+  
+}
+
+/*
+void twi_send(uint8_t adr, uint8_t data1, uint8_t data2)
+{
+  u8g_i2c_start(adr<<1);
+  u8g_i2c_send_byte(data1);
+  u8g_i2c_send_byte(data2);
+  u8g_i2c_stop();
+}
+*/
+
+#else
+
+/* empty interface */
+
+void u8g_i2c_init(uint8_t options)
+{
+  u8g_i2c_clear_error();
+}
+
+uint8_t u8g_i2c_wait(uint8_t mask, uint8_t pos)
+{
+  return 1;
+}
+
+uint8_t u8g_i2c_start(uint8_t sla)
+{
+  return 1;
+}
+uint8_t u8g_i2c_send_byte(uint8_t data)
+{
+  return 1;
+}
+
+void u8g_i2c_stop(void)
+{
+}
+
+
+#endif
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_io.c

@@ -0,0 +1,218 @@
+/*
+  
+  u8g_com_io.c
+  
+  abstraction layer for low level i/o 
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+
+*/
+
+#include "u8g.h"
+
+#if defined(__AVR__)
+
+#include <avr/interrupt.h>
+#include <avr/io.h>
+
+typedef volatile uint8_t * IO_PTR;
+
+/* create internal pin number */
+uint8_t u8g_Pin(uint8_t port, uint8_t bitpos)
+{
+  port <<= 3;
+  port += bitpos;
+  return port;
+}
+
+const IO_PTR u8g_avr_ddr_P[] PROGMEM = {
+#ifdef DDRA
+  &DDRA,
+#else
+  0,
+#endif
+  &DDRB,
+#ifdef DDRC
+  &DDRC,
+#ifdef DDRD
+  &DDRD,
+#ifdef DDRE
+  &DDRE,
+#ifdef DDRF
+  &DDRF,
+#ifdef DDRG
+  &DDRG,
+#ifdef DDRH
+  &DDRH,
+#endif
+#endif
+#endif
+#endif
+#endif
+#endif
+};
+
+
+const IO_PTR u8g_avr_port_P[] PROGMEM = {
+#ifdef PORTA
+  &PORTA,
+#else
+  0,
+#endif
+  &PORTB,
+#ifdef PORTC
+  &PORTC,
+#ifdef PORTD
+  &PORTD,
+#ifdef PORTE
+  &PORTE,
+#ifdef PORTF
+  &PORTF,
+#ifdef PORTG
+  &PORTG,
+#ifdef PORTH
+  &PORTH,
+#endif
+#endif
+#endif
+#endif
+#endif
+#endif
+};
+
+const IO_PTR u8g_avr_pin_P[] PROGMEM = {
+#ifdef PINA
+  &PINA,
+#else
+  0,
+#endif
+  &PINB,
+#ifdef PINC
+  &PINC,
+#ifdef PIND
+  &PIND,
+#ifdef PINE
+  &PINE,
+#ifdef PINF
+  &PINF,
+#ifdef PING
+  &PING,
+#ifdef PINH
+  &PINH,
+#endif
+#endif
+#endif
+#endif
+#endif
+#endif
+};
+
+static volatile uint8_t *u8g_get_avr_io_ptr(const IO_PTR *base, uint8_t offset)
+{
+  volatile uint8_t * tmp;
+  base += offset;
+  memcpy_P(&tmp, base, sizeof(volatile uint8_t * PROGMEM));
+  return tmp; 
+}
+
+/* set direction to output of the specified pin (internal pin number) */
+void u8g_SetPinOutput(uint8_t internal_pin_number)
+{
+  *u8g_get_avr_io_ptr(u8g_avr_ddr_P, internal_pin_number>>3) |= _BV(internal_pin_number&7);
+}
+
+void u8g_SetPinInput(uint8_t internal_pin_number)
+{
+  *u8g_get_avr_io_ptr(u8g_avr_ddr_P, internal_pin_number>>3) &= ~_BV(internal_pin_number&7);
+}
+
+void u8g_SetPinLevel(uint8_t internal_pin_number, uint8_t level)
+{
+  volatile uint8_t * tmp = u8g_get_avr_io_ptr(u8g_avr_port_P, internal_pin_number>>3);
+  
+  if ( level == 0 )
+    *tmp &= ~_BV(internal_pin_number&7);
+  else
+    *tmp |= _BV(internal_pin_number&7);
+}
+
+uint8_t u8g_GetPinLevel(uint8_t internal_pin_number)
+{
+  volatile uint8_t * tmp = u8g_get_avr_io_ptr(u8g_avr_pin_P, internal_pin_number>>3);
+  if ( ((*tmp) & _BV(internal_pin_number&7))  != 0 )
+    return 1;
+  return 0;
+}
+
+#else
+
+uint8_t u8g_Pin(uint8_t port, uint8_t bitpos)
+{
+  port <<= 3;
+  port += bitpos;
+  return port;
+}
+
+void u8g_SetPinOutput(uint8_t internal_pin_number)
+{
+}
+
+void u8g_SetPinInput(uint8_t internal_pin_number)
+{
+}
+
+void u8g_SetPinLevel(uint8_t internal_pin_number, uint8_t level)
+{
+}
+
+uint8_t u8g_GetPinLevel(uint8_t internal_pin_number)
+{
+  return 0;
+}
+
+#endif
+
+
+void u8g_SetPIOutput(u8g_t *u8g, uint8_t pi)
+{
+  uint8_t pin;
+  pin = u8g->pin_list[pi];
+  if ( pin != U8G_PIN_NONE )
+    u8g_SetPinOutput(pin);
+}
+
+void u8g_SetPILevel(u8g_t *u8g, uint8_t pi, uint8_t level)
+{
+  uint8_t pin;
+  pin = u8g->pin_list[pi];
+  if ( pin != U8G_PIN_NONE )
+    u8g_SetPinLevel(pin, level);
+}

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_com_null.c

@@ -0,0 +1,63 @@
+/*
+
+  u8g_com_null.c
+ 
+  communication null device
+
+  Universal 8bit Graphics Library
+ 
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification,
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list
+    of conditions and the following disclaimer.
+   
+  * Redistributions in binary form must reproduce the above copyright notice, this
+    list of conditions and the following disclaimer in the documentation and/or other
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+ 
+ 
+*/
+
+#include "u8g.h"
+
+uint8_t u8g_com_null_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+  switch(msg)
+  {
+    case U8G_COM_MSG_INIT:
+      break;
+    case U8G_COM_MSG_STOP:
+      break;
+
+   
+    case U8G_COM_MSG_CHIP_SELECT:
+      /* arg_val contains the chip number, which should be enabled */
+      break;
+
+
+    case U8G_COM_MSG_WRITE_BYTE:
+      break;
+    case U8G_COM_MSG_WRITE_SEQ:
+      break;
+  }
+  return 1;
+}
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_cursor.c

@@ -0,0 +1,99 @@
+/*
+
+  u8g_cursor.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+void u8g_SetCursorFont(u8g_t *u8g, const u8g_pgm_uint8_t *cursor_font)
+{
+  u8g->cursor_font = cursor_font;
+}
+
+void u8g_SetCursorStyle(u8g_t *u8g, uint8_t encoding)
+{
+  u8g->cursor_encoding = encoding;
+}
+
+void u8g_SetCursorColor(u8g_t *u8g, uint8_t fg, uint8_t bg)
+{
+  u8g->cursor_bg_color = bg;
+  u8g->cursor_fg_color = fg;
+}
+
+void u8g_SetCursorPos(u8g_t *u8g, u8g_uint_t cursor_x, u8g_uint_t cursor_y)
+{
+  u8g->cursor_x = cursor_x;
+  u8g->cursor_y = cursor_y;
+}
+
+void u8g_EnableCursor(u8g_t *u8g)
+{
+    u8g->cursor_fn = u8g_DrawCursor;
+}
+
+void u8g_DisableCursor(u8g_t *u8g)
+{
+    u8g->cursor_fn = (u8g_draw_cursor_fn)0;
+}
+
+void u8g_DrawCursor(u8g_t *u8g)
+{
+  const u8g_pgm_uint8_t *font;
+  uint8_t color;
+  uint8_t encoding = u8g->cursor_encoding;
+  
+  /* get current values */
+  color = u8g_GetColorIndex(u8g);
+  font = u8g->font;
+  
+  /* draw cursor */
+  u8g->font = u8g->cursor_font;  
+  encoding++;
+  u8g_SetColorIndex(u8g, u8g->cursor_bg_color); 
+  /* 27. Jan 2013: replaced call to u8g_DrawGlyph with call to u8g_draw_glyph */
+  /* required, because y adjustment should not happen to the cursor fonts */
+  u8g_draw_glyph(u8g, u8g->cursor_x, u8g->cursor_y, encoding);
+  encoding--;
+  u8g_SetColorIndex(u8g, u8g->cursor_fg_color); 
+  /* 27. Jan 2013: replaced call to u8g_DrawGlyph with call to u8g_draw_glyph */
+  /* required, because y adjustment should not happen to the cursor fonts */
+  /* u8g_DrawGlyph(u8g, u8g->cursor_x, u8g->cursor_y, encoding); */
+  u8g_draw_glyph(u8g, u8g->cursor_x, u8g->cursor_y, encoding);
+  
+  /* restore previous values */
+  u8g->font = font;
+  u8g_SetColorIndex(u8g, color); 
+}
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_delay.c

@@ -0,0 +1,215 @@
+/*
+
+  u8g_delay.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+
+#include "u8g.h"
+
+/*==== Part 1: Derive suitable delay procedure ====*/
+
+#if defined(ARDUINO)
+#  if defined(__AVR__)
+#    define USE_AVR_DELAY
+#  elif defined(__PIC32MX)
+#    define USE_PIC32_DELAY
+#  elif defined(__arm__)		/* Arduino Due */
+#    define USE_ARDUINO_DELAY
+#  else
+#    define USE_ARDUINO_DELAY
+#  endif
+#elif defined(__AVR__)
+#  define USE_AVR_DELAY
+#elif defined(__18CXX)
+#  define USE_PIC18_DELAY
+#else
+#  define USE_DUMMY_DELAY
+#endif
+
+
+
+/*==== Part 2: Definition of the delay procedures ====*/
+
+/*== AVR Delay ==*/
+
+#if defined(USE_AVR_DELAY)
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+
+/*
+  Delay by the provided number of milliseconds.
+  Thus, a 16 bit value will allow a delay of 0..65 seconds
+  Makes use of the _delay_loop_2
+  
+  _delay_loop_2 will do a delay of n * 4 prozessor cycles.
+  with f = F_CPU cycles per second,
+  n = f / (1000 * 4 )
+  with f = 16000000 the result is 4000
+  with f = 1000000 the result is 250
+  
+  the millisec loop, gcc requires the following overhead:
+  - movev 1
+  - subwi 2x2
+  - bne i 2
+  ==> 7 cycles
+  ==> must be devided by 4, rounded up 7/4 = 2
+*/
+void u8g_Delay(uint16_t val)
+{
+  /* old version did a call to the arduino lib: delay(val); */
+  while( val != 0 )
+  {
+    _delay_loop_2( (F_CPU / 4000 ) -2);
+    val--;
+  }
+}
+
+/* delay by one micro second */
+void u8g_MicroDelay(void)
+{
+#if (F_CPU / 4000000 ) > 0 
+  _delay_loop_2( (F_CPU / 4000000 ) );
+#endif
+}
+
+/* delay by 10 micro seconds */
+void u8g_10MicroDelay(void)
+{
+#if (F_CPU / 400000 ) > 0 
+  _delay_loop_2( (F_CPU / 400000 ) );
+#endif
+}
+
+#endif 
+
+
+/*== Delay for PIC18 (not tested) ==*/
+
+#if defined(USE_PIC18_DELAY)
+#include <delays.h>
+#define GetSystemClock()		(64000000ul)      // Hz
+#define GetInstructionClock()	(GetSystemClock()/4)
+
+void u8g_Delay(uint16_t val)
+{/*
+	unsigned int _iTemp = (val);
+	while(_iTemp--)		
+		Delay1KTCYx((GetInstructionClock()+999999)/1000000);
+		*/
+}
+void u8g_MicroDelay(void)
+{
+  /* not implemented */
+}
+void u8g_10MicroDelay(void)
+{
+  /* not implemented */
+}
+#endif
+
+
+/*== Arduino Delay ==*/
+#if defined(USE_ARDUINO_DELAY)
+void u8g_Delay(uint16_t val)
+{
+	delay(val);
+}
+void u8g_MicroDelay(void)
+{
+	delayMicroseconds(1);
+}
+void u8g_10MicroDelay(void)
+{
+	delayMicroseconds(10);
+}
+#endif
+
+#if defined(USE_PIC32_DELAY)
+/* 
+  Assume chipkit here with F_CPU correctly defined
+  The problem was, that u8g_Delay() is called within the constructor.
+  It seems that the chipkit is not fully setup at this time, so a
+  call to delay() will not work. So here is my own implementation.
+
+*/
+#define CPU_COUNTS_PER_SECOND (F_CPU/2UL)
+#define TICKS_PER_MILLISECOND  (CPU_COUNTS_PER_SECOND/1000UL)
+#include "plib.h"
+void u8g_Delay(uint16_t val)
+{
+	uint32_t d;
+	uint32_t s;
+	d = val;
+	d *= TICKS_PER_MILLISECOND;
+	s = ReadCoreTimer();
+	while ( (uint32_t)(ReadCoreTimer() - s) < d )
+		;
+} 
+
+void u8g_MicroDelay(void)
+{
+	uint32_t d;
+	uint32_t s;
+	d = TICKS_PER_MILLISECOND/1000;
+	s = ReadCoreTimer();
+	while ( (uint32_t)(ReadCoreTimer() - s) < d )
+		;
+} 
+
+void u8g_10MicroDelay(void)
+{
+	uint32_t d;
+	uint32_t s;
+	d = TICKS_PER_MILLISECOND/100;
+	s = ReadCoreTimer();
+	while ( (uint32_t)(ReadCoreTimer() - s) < d )
+		;
+} 
+
+#endif
+
+/*== Any other systems: Dummy Delay ==*/
+#if defined(USE_DUMMY_DELAY)
+void u8g_Delay(uint16_t val)
+{
+	/* do not know how to delay... */
+}
+void u8g_MicroDelay(void)
+{
+}
+void u8g_10MicroDelay(void)
+{
+}
+#endif

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_flipdisc_2x7.c

@@ -0,0 +1,92 @@
+/*
+
+  u8g_dev_flipdisc.c
+  
+  1-Bit (BW) Driver for flip disc matrix
+  2x 7 pixel height
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 28
+#define HEIGHT 14
+#define PAGE_HEIGHT 14
+
+/*
+  Write data to the flip disc matrix.
+  This procedure must be implemented by the user.
+  Arguments:
+    id:	Id for the matrix. Currently always 0.
+    page: 	A page has a height of 14 pixel. For a matrix with HEIGHT == 14 this will be always 0
+    width: 	The width of the flip disc matrix. Always equal to WIDTH
+    row1: 	first data line (7 pixel per byte)
+    row2: 	first data line (7 pixel per byte)
+*/
+void writeFlipDiscMatrix(uint8_t id, uint8_t page, uint8_t width, uint8_t *row1, uint8_t *row2);
+
+
+
+void (*u8g_write_flip_disc_matrix)(uint8_t id, uint8_t page, uint8_t width, uint8_t *row1, uint8_t *row2);
+
+void u8g_SetFlipDiscCallback(u8g_t *u8g, void (*cb)(uint8_t id, uint8_t page, uint8_t width, uint8_t *row1, uint8_t *row2))
+{
+  u8g_write_flip_disc_matrix = cb;
+}
+
+uint8_t u8g_dev_flipdisc_2x7_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        
+	/* current page: pb->p.page */
+	/* ptr to the buffer: pb->buf */
+	
+	(*u8g_write_flip_disc_matrix)(0, pb->p.page, WIDTH, pb->buf, pb->buf+WIDTH);
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      return 1;
+  }
+  return u8g_dev_pb14v1_base_fn(u8g, dev, msg, arg);
+}
+
+uint8_t u8g_dev_flipdisc_2x7_bw_buf[WIDTH*2] U8G_NOCOMMON ; 
+u8g_pb_t u8g_dev_flipdisc_2x7_bw_pb = { {16, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_flipdisc_2x7_bw_buf}; 
+u8g_dev_t u8g_dev_flipdisc_2x7 = { u8g_dev_flipdisc_2x7_bw_fn, &u8g_dev_flipdisc_2x7_bw_pb, u8g_com_null_fn };

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_gprof.c

@@ -0,0 +1,130 @@
+/*
+
+  u8g_dev_gprof.c
+
+  Device for performance measurement with gprof.
+  Does not write any data, but uses a buffer.
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+
+*/
+
+#include "u8g.h"
+
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+uint8_t u8g_dev_gprof_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg);
+
+uint8_t u8g_pb_dev_gprof_buf[WIDTH];
+u8g_pb_t u8g_pb_dev_gprof = { {PAGE_HEIGHT, HEIGHT, 0, 0, 0},  WIDTH, u8g_pb_dev_gprof_buf };
+
+u8g_dev_t u8g_dev_gprof = { u8g_dev_gprof_fn, &u8g_pb_dev_gprof, NULL };
+
+uint8_t u8g_dev_gprof_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+  
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_FIRST:
+      u8g_pb_Clear(pb);
+      u8g_page_First(&(pb->p));
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      /*
+      {
+        uint8_t i, j;
+        uint8_t page_height;
+        page_height = pb->p.page_y1;
+        page_height -= pb->p.page_y0;
+        page_height++;
+        for( j = 0; j < page_height; j++ )
+        {
+          printf("%02d ", j);
+          for( i = 0; i < WIDTH; i++ )
+          {
+            if ( (u8g_pb_dev_stdout_buf[i] & (1<<j)) != 0 )
+              printf("#");
+            else
+              printf(".");
+          }
+          printf("\n");
+        }
+      }
+      */
+      if ( u8g_page_Next(&(pb->p)) == 0 )
+      {
+        //printf("\n");
+        return 0;
+      }
+      u8g_pb_Clear(pb);
+      break;
+#ifdef U8G_DEV_MSG_IS_BBX_INTERSECTION
+    case U8G_DEV_MSG_IS_BBX_INTERSECTION:
+       {
+        u8g_dev_arg_bbx_t *bbx = (u8g_dev_arg_bbx_t *)arg;
+        u8g_uint_t x2, y2;
+
+        y2 = bbx->y;
+        y2 += bbx->h;
+        y2--;
+        
+        if ( u8g_pb_IsYIntersection(pb, bbx->y, y2) == 0 )
+          return 0;
+        
+        /* maybe this one can be skiped... probability is very high to have an intersection, so it would be ok to always return 1 */
+        x2 = bbx->x;
+        x2 += bbx->w;
+        x2--;
+        
+        if ( u8g_pb_IsXIntersection(pb, bbx->x, x2) == 0 )
+          return 0;
+      }
+      return 1;
+#endif
+    case U8G_DEV_MSG_GET_PAGE_BOX:
+      u8g_pb_GetPageBox(pb, (u8g_box_t *)arg);
+      break;
+    case U8G_DEV_MSG_SET_COLOR_INDEX:
+      break;
+    case U8G_DEV_MSG_SET_XY_CB:
+      break;
+  }
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_ili9325d_320x240.c

@@ -0,0 +1,326 @@
+/*
+
+  u8g_dev_ili9325d_320x240.c
+  
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+
+  Color format
+    Red: 5 Bit
+    Green: 6 Bit
+    Blue: 5 Bit
+  
+    
+*/
+
+#include "u8g.h"
+
+#define WIDTH 240
+
+#if defined(U8G_16BIT)
+#define HEIGHT 320
+#else
+/* if the user tries to compile the 8Bit version of the lib, then restrict the height to something which fits to 8Bit */
+#define HEIGHT 240
+#endif
+#define PAGE_HEIGHT 4
+
+
+/*
+  reference board for this device:
+    http://iteadstudio.com/store/index.php?main_page=product_info&cPath=57_58&products_id=55
+  documentation:
+    http://iteadstudio.com/Downloadfile/ITDB02_material.rar
+  datasheet
+    http://www.newhavendisplay.com/app_notes/ILI9325D.pdf
+  other libs
+    http://henningkarlsen.com/electronics/library.php
+  init sequence
+    http://code.google.com/p/itdb02/, ITDB02.cpp, iteadstudio.com
+*/
+
+static const uint8_t u8g_dev_ili9325d_320x240_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+  U8G_ESC_CS(1),             /* enable chip */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+
+  
+  //U8G_ESC_ADR(0),  0x000, 0x0E5,               /* only used for none D version: set SRAM internal timing */
+  //U8G_ESC_ADR(1),  0x078, 0x0f0,             
+  U8G_ESC_ADR(0),  0x000, 0x001,               /* Driver Output Control, bits 8 & 10 */
+  U8G_ESC_ADR(1),  0x001, 0x000,           
+  U8G_ESC_ADR(0),  0x000, 0x002,               /* LCD Driving Wave Control, bit 9: Set line inversion */
+  U8G_ESC_ADR(1),  0x002, 0x000,               /* ITDB02 none D verion: 0x007, 0x000 */        
+  U8G_ESC_ADR(0),  0x000, 0x003,               /* Entry Mode, GRAM write direction and BGR=1 */
+  U8G_ESC_ADR(1),  0x010, 0x030,           
+  U8G_ESC_ADR(0),  0x000, 0x004,               /* Resize register */
+  U8G_ESC_ADR(1),  0x000, 0x000,           
+  U8G_ESC_ADR(0),  0x000, 0x008,               /* Display Control 2: set the back porch and front porch */
+  U8G_ESC_ADR(1),  0x002, 0x007,           
+  
+  U8G_ESC_ADR(0),  0x000, 0x009,               /* Display Control 3 */
+  U8G_ESC_ADR(1),  0x000, 0x000,           
+
+  U8G_ESC_ADR(0),  0x000, 0x00a,               /* Display Control 4: FMARK */
+  U8G_ESC_ADR(1),  0x000, 0x000,           
+  U8G_ESC_ADR(0),  0x000, 0x00c,               /* RGB Display Interface Control 1 */
+  U8G_ESC_ADR(1),  0x000, 0x000,           
+  U8G_ESC_ADR(0),  0x000, 0x00d,               /* Frame Maker Position */
+  U8G_ESC_ADR(1),  0x000, 0x000,           
+  U8G_ESC_ADR(0),  0x000, 0x00f,                /* RGB Display Interface Control 2 */
+  U8G_ESC_ADR(1),  0x000, 0x000,  
+  U8G_ESC_ADR(0),  0x000, 0x010,               /* Power Control 1: SAP, BT[3:0], AP, DSTB, SLP, STB */
+  U8G_ESC_ADR(1),  0x000, 0x000,  
+  U8G_ESC_ADR(0),  0x000, 0x011,               /* Power Control 2: DC1[2:0], DC0[2:0], VC[2:0] */
+  U8G_ESC_ADR(1),  0x000, 0x007,  
+  U8G_ESC_ADR(0),  0x000, 0x012,               /* Power Control 3: VREG1OUT voltage */
+  U8G_ESC_ADR(1),  0x000, 0x000,  
+  U8G_ESC_ADR(0),  0x000, 0x013,               /* Power Control 4: VDV[4:0] for VCOM amplitude */
+  U8G_ESC_ADR(1),  0x000, 0x000,  
+  U8G_ESC_ADR(0),  0x000, 0x007,               /* Display Control 1: Operate, but do not display */
+  U8G_ESC_ADR(1),  0x000, 0x001,   
+  
+  U8G_ESC_DLY(100),         /* delay 100 ms */  /*  ITDB02 none D verion:  50ms */
+  U8G_ESC_DLY(100),         /* delay 100 ms */
+  
+  U8G_ESC_ADR(0),  0x000, 0x010,               /* Power Control 1: SAP, BT[3:0], AP, DSTB, SLP, STB */
+  U8G_ESC_ADR(1),  0x016, 0x090,               /*  ITDB02 none D verion:  0x010, 0x090 */
+  U8G_ESC_ADR(0),  0x000, 0x011,               /* Power Control 2: SAP, BT[3:0], AP, DSTB, SLP, STB */
+  U8G_ESC_ADR(1),  0x002, 0x027,
+
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+  
+  U8G_ESC_ADR(0),  0x000, 0x012,               /* Power Control 3: VCI: External, VCI*1.80 */
+  U8G_ESC_ADR(1),  0x000, 0x00d,               /*  ITDB02 none D verion:  0x000, 0x01f */
+
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+  
+  U8G_ESC_ADR(0),  0x000, 0x013,               /* Power Control 4: VDV[4:0] for VCOM amplitude */
+  U8G_ESC_ADR(1),  0x012, 0x000,               /*  ITDB02 none D verion:  0x015, 0x000 */
+  U8G_ESC_ADR(0),  0x000, 0x029,               /* Power Control 7 */
+  U8G_ESC_ADR(1),  0x000, 0x00a,               /*  ITDB02 none D verion:  0x000, 0x027 */
+  U8G_ESC_ADR(0),  0x000, 0x02b,               /* Frame Rate: 83 */
+  U8G_ESC_ADR(1),  0x000, 0x00d,
+
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+  
+  U8G_ESC_ADR(0),  0x000, 0x020,               /* Horizontal GRAM Address Set */
+  U8G_ESC_ADR(1),  0x000, 0x000,
+  U8G_ESC_ADR(0),  0x000, 0x021,               /* Vertical GRAM Address Set */
+  U8G_ESC_ADR(1),  0x000, 0x000,
+
+  /* gamma control */
+  U8G_ESC_ADR(0),  0x000, 0x030,               
+  U8G_ESC_ADR(1),  0x000, 0x000,
+  U8G_ESC_ADR(0),  0x000, 0x031,
+  U8G_ESC_ADR(1),  0x004, 0x004,
+  U8G_ESC_ADR(0),  0x000, 0x032,
+  U8G_ESC_ADR(1),  0x000, 0x003,
+  U8G_ESC_ADR(0),  0x000, 0x035,               
+  U8G_ESC_ADR(1),  0x004, 0x005,
+  U8G_ESC_ADR(0),  0x000, 0x036,               
+  U8G_ESC_ADR(1),  0x008, 0x008,
+  U8G_ESC_ADR(0),  0x000, 0x037,               
+  U8G_ESC_ADR(1),  0x004, 0x007,
+  U8G_ESC_ADR(0),  0x000, 0x038,               
+  U8G_ESC_ADR(1),  0x003, 0x003,
+  U8G_ESC_ADR(0),  0x000, 0x039,               
+  U8G_ESC_ADR(1),  0x007, 0x007,
+  U8G_ESC_ADR(0),  0x000, 0x03c,               
+  U8G_ESC_ADR(1),  0x005, 0x004,
+  U8G_ESC_ADR(0),  0x000, 0x03d,               
+  U8G_ESC_ADR(1),  0x008, 0x008,
+  
+  U8G_ESC_ADR(0),  0x000, 0x050,               /* Horizontal GRAM Start Address */
+  U8G_ESC_ADR(1),  0x000, 0x000,
+  U8G_ESC_ADR(0),  0x000, 0x051,               /* Horizontal GRAM End Address: 239 */
+  U8G_ESC_ADR(1),  0x000, 0x0EF,
+  U8G_ESC_ADR(0),  0x000, 0x052,               /* Vertical GRAM Start Address */
+  U8G_ESC_ADR(1),  0x000, 0x000,
+  U8G_ESC_ADR(0),  0x000, 0x053,               /* Vertical GRAM End Address: 319 */
+  U8G_ESC_ADR(1),  0x001, 0x03F,
+  
+  U8G_ESC_ADR(0),  0x000, 0x060,               /* Driver Output Control 2 */
+  U8G_ESC_ADR(1),  0x0a7, 0x000,
+  U8G_ESC_ADR(0),  0x000, 0x061,               /* Base Image Display Control: NDL,VLE, REV */
+  U8G_ESC_ADR(1),  0x000, 0x001,
+  U8G_ESC_ADR(0),  0x000, 0x06a,               /* Vertical Scroll Control */
+  U8G_ESC_ADR(1),  0x000, 0x000,
+
+  U8G_ESC_ADR(0),  0x000, 0x080,               /* Partial Image 1 Display Position */
+  U8G_ESC_ADR(1),  0x000, 0x000,
+  U8G_ESC_ADR(0),  0x000, 0x081,               /* Partial Image 1 RAM Start Address */
+  U8G_ESC_ADR(1),  0x000, 0x000,
+  U8G_ESC_ADR(0),  0x000, 0x082,               /* Partial Image 1 RAM End Address */
+  U8G_ESC_ADR(1),  0x000, 0x000,
+  U8G_ESC_ADR(0),  0x000, 0x083,               /* Partial Image 2 Display Position */
+  U8G_ESC_ADR(1),  0x000, 0x000,
+  U8G_ESC_ADR(0),  0x000, 0x084,               /* Partial Image 2 RAM Start Address */
+  U8G_ESC_ADR(1),  0x000, 0x000,
+  U8G_ESC_ADR(0),  0x000, 0x085,               /* Partial Image 2 RAM End Address */
+  U8G_ESC_ADR(1),  0x000, 0x000,
+
+  U8G_ESC_ADR(0),  0x000, 0x090,               /* Panel Interface Control 1 */
+  U8G_ESC_ADR(1),  0x000, 0x010,
+  U8G_ESC_ADR(0),  0x000, 0x092,               /* Panel Interface Control 2 */
+  U8G_ESC_ADR(1),  0x000, 0x000,        /* 0x006, 0x000 */
+
+  U8G_ESC_ADR(0),  0x000, 0x007,               /* Display Control 1: Operate, display ON */
+  U8G_ESC_ADR(1),  0x001, 0x033,   
+
+  U8G_ESC_DLY(10),               /* delay 10 ms */
+  
+  /* write test pattern */  
+  U8G_ESC_ADR(0),  0x000, 0x020,               /* Horizontal GRAM Address Set */
+  U8G_ESC_ADR(1),  0x000, 0x000,
+  U8G_ESC_ADR(0),  0x000, 0x021,               /* Vertical GRAM Address Set */
+  U8G_ESC_ADR(1),  0x000, 0x010,
+  U8G_ESC_ADR(0),  0x000, 0x022,               /* Write Data to GRAM */
+  U8G_ESC_ADR(1),  0x0fe, 0x0fe,
+  0x000, 0x000,
+  0x0fe, 0x0fe,
+  0x000, 0x000,
+  0x0fe, 0x0fe,
+  0x000, 0x000,
+  0x0fe, 0x0fe,
+  0x000, 0x000,
+  0x0fe, 0x0fe,
+  0x000, 0x000,
+  0x0fe, 0x0fe,
+  0x000, 0x000,
+  0x0fe, 0x0fe,
+  0x000, 0x000,
+  0x0fe, 0x0fe,
+  0x000, 0x000,
+  0x0fe, 0x0fe,
+  
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+
+static const uint8_t u8g_dev_ili9325d_320x240_page_seq[] PROGMEM = {
+  U8G_ESC_CS(1),             /* enable chip */
+  U8G_ESC_ADR(0),  0x000, 0x020,               /* Horizontal GRAM Address Set */
+  U8G_ESC_ADR(1),  0x000, 0x000,
+  U8G_ESC_ADR(0),  0x000, 0x021,               /* Vertical GRAM Address Set */
+  U8G_ESC_ADR(1), 
+  U8G_ESC_END                /* end of sequence */
+};
+
+/* convert the internal RGB 332 to 65K high byte */
+static uint8_t u8g_dev_ili9325d_get_65K_high_byte(uint8_t color)
+{
+  uint8_t h;
+  h = color;
+  h &= 0x0e0;
+  h |= h>>3;
+  h &= 0x0f8;
+  color>>=2;
+  color &= 7;
+  h |= color;
+  return h;  
+}
+
+/* convert the internal RGB 332 to 65K high byte */
+static uint8_t u8g_dev_ili9325d_get_65K_low_byte(uint8_t color)
+{
+  uint8_t l;
+  l = color;
+  l <<= 3;
+  color &= 3;
+  color <<= 1;
+  l |= color;
+  return l;  
+}
+
+
+uint8_t u8g_dev_ili9325d_320x240_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      //for(;;)
+        u8g_WriteEscSeqP(u8g, dev, u8g_dev_ili9325d_320x240_init_seq);
+    
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        uint8_t i;
+        uint16_t y, j;
+        uint8_t *ptr;
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        
+        y = pb->p.page_y0;
+        ptr = pb->buf;
+        for( i = 0; i < pb->p.page_height; i ++ )
+        {
+          u8g_WriteEscSeqP(u8g, dev, u8g_dev_ili9325d_320x240_page_seq);
+          u8g_WriteByte(u8g, dev, y >> 8 );      /* display ram (cursor) address high byte */
+          u8g_WriteByte(u8g, dev, y & 255 );      /* display ram (cursor) address low byte */
+
+          u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0 );  
+          u8g_WriteByte(u8g, dev, 0x022 );      /* start gram data */  
+          
+          u8g_SetAddress(u8g, dev, 1);           /* data mode */
+          
+          for( j = 0; j < pb->width; j++ )
+          {
+            u8g_WriteByte(u8g, dev, u8g_dev_ili9325d_get_65K_high_byte(*ptr) );  
+            u8g_WriteByte(u8g, dev, u8g_dev_ili9325d_get_65K_low_byte(*ptr) );  
+              
+            ptr++;
+          }
+          y++;
+        }
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+  }
+  return u8g_dev_pb8h8_base_fn(u8g, dev, msg, arg);
+}
+
+uint8_t u8g_ili9325d_320x240_8h8_buf[WIDTH*PAGE_HEIGHT] U8G_NOCOMMON ; 
+u8g_pb_t u8g_ili9325d_320x240_8h8_pb U8G_NOCOMMON = { {PAGE_HEIGHT, HEIGHT, 0, 0, 0},  WIDTH, u8g_ili9325d_320x240_8h8_buf}; 
+u8g_dev_t u8g_dev_ili9325d_320x240_8bit U8G_NOCOMMON = { u8g_dev_ili9325d_320x240_fn, &u8g_ili9325d_320x240_8h8_pb, u8g_com_arduino_port_d_wr_fn };
+//u8g_dev_t u8g_dev_ili9325d_320x240_8bit = { u8g_dev_ili9325d_320x240_fn, &u8g_ili9325d_320x240_8h8_pb, u8g_com_arduino_parallel_fn };
+
+//U8G_PB_DEV(u8g_dev_ili9325d_320x240_8bit, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ili9325d_320x240_fn, U8G_COM_PARALLEL);
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_ks0108_128x64.c

@@ -0,0 +1,110 @@
+/*
+
+  u8g_dev_ks0108_128x64.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+
+  ADDRESS = 0   (Command Mode)
+    0x03f       Display On
+    0x0c0       Start Display at line 0
+    0x040 | y   write to y address (y:0..63)
+    0x0b8 | x   write to page [0..7]
+
+
+  u8g_Init8Bit(u8g, dev, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, cs2, di, rw, reset)
+  u8g_Init8Bit(u8g, dev,  8,    9, 10, 11,   4,   5,   6,   7, 18, 14, 15, 17, 16, U8G_PIN_NONE)
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+static const uint8_t u8g_dev_ks0108_128x64_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip 1 */
+  0x03f,		                /* display on */
+  0x0c0,		                /* start at line 0 */
+  U8G_ESC_DLY(20),         /* delay 20 ms */
+  U8G_ESC_CS(2),             /* enable chip 2 */
+  0x03f,		                /* display on */
+  0x0c0,		                /* start at line 0 */
+  U8G_ESC_DLY(20),         /* delay 20 ms */
+  U8G_ESC_CS(0),             /* disable all chips */
+  U8G_ESC_END                /* end of sequence */
+};
+
+
+uint8_t u8g_dev_ks0108_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ks0108_128x64_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        
+        u8g_SetAddress(u8g, dev, 0);           /* command mode */
+        u8g_SetChipSelect(u8g, dev, 2);
+        u8g_WriteByte(u8g, dev, 0x0b8 | pb->p.page); /* select current page (KS0108b) */
+        u8g_WriteByte(u8g, dev, 0x040 );		/* set address 0 */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        u8g_WriteSequence(u8g, dev, 64, pb->buf);
+        u8g_SetChipSelect(u8g, dev, 0);
+        
+        u8g_SetAddress(u8g, dev, 0);           /* command mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        u8g_WriteByte(u8g, dev, 0x0b8 | pb->p.page); /* select current page (KS0108b) */
+        u8g_WriteByte(u8g, dev, 0x040 );		/* set address 0 */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        u8g_WriteSequence(u8g, dev, 64, 64+(uint8_t *)pb->buf);
+        u8g_SetChipSelect(u8g, dev, 0);
+        
+      }
+      break;
+  }
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_ks0108_128x64, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ks0108_128x64_fn, U8G_COM_PARALLEL);
+U8G_PB_DEV(u8g_dev_ks0108_128x64_fast, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ks0108_128x64_fn, U8G_COM_FAST_PARALLEL);
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_lc7981_160x80.c

@@ -0,0 +1,147 @@
+/*
+
+  u8g_dev_lc7981_160x80.c
+  
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 160
+#define HEIGHT 80
+#define PAGE_HEIGHT 8
+
+
+/*
+  code ideas: 
+  https://github.com/vsergeev/embedded-drivers/tree/master/avr-lc7981
+  data sheets:
+  http://www.lcd-module.de/eng/pdf/zubehoer/lc7981.pdf
+  http://www.lcd-module.de/pdf/grafik/w160-6.pdf
+*/
+
+static const uint8_t u8g_dev_lc7981_160x80_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(1),           /* instruction mode */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+  U8G_ESC_CS(1),             /* enable chip */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+  
+  
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x000,                                /* mode register */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x032,                                /* display on (bit 5), master mode on (bit 4), graphics mode on (bit 1)*/
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x001,                                /* character/bits per pixel pitch */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x007,                                /* 8 bits per pixel */
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x002,                                /* number of chars/byte width of the screen */
+  U8G_ESC_ADR(0),               /* data mode */
+  WIDTH/8-1,                         /* 8 bits per pixel */
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x003,                                /* time division */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x07f,                                /*  */
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x008,                                /* display start low */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /*  */
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x009,                                /* display start high */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /*  */
+    
+  U8G_ESC_DLY(10),               /* delay 10 ms */
+  
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_lc7981_160x80_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_lc7981_160x80_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        uint8_t y, i;
+        uint16_t disp_ram_adr;
+        uint8_t *ptr;
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        
+        u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        y = pb->p.page_y0;
+        ptr = pb->buf;
+        disp_ram_adr = WIDTH/8;
+        disp_ram_adr *= y;
+        for( i = 0; i < 8; i ++ )
+        {
+          u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x00a );      /* display ram (cursor) address low byte */
+          u8g_SetAddress(u8g, dev, 0);           /* data mode */
+          u8g_WriteByte(u8g, dev, disp_ram_adr & 0x0ff );  
+
+          u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x00b );      /* display ram (cursor) address hight byte */
+          u8g_SetAddress(u8g, dev, 0);           /* data mode */
+          u8g_WriteByte(u8g, dev, disp_ram_adr >> 8 );  
+          
+          u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x00c );      /* write data */
+          u8g_SetAddress(u8g, dev, 0);           /* data mode */
+          u8g_WriteSequence(u8g, dev, WIDTH/8, ptr);
+          ptr += WIDTH/8;
+          disp_ram_adr += WIDTH/8;
+        }
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+  }
+  return u8g_dev_pb8h1f_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_lc7981_160x80_8bit, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_lc7981_160x80_fn, U8G_COM_FAST_PARALLEL);
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_lc7981_240x128.c

@@ -0,0 +1,145 @@
+/*
+
+  u8g_dev_lc7981_240x128.c
+  
+  Hitachi Display SP14N002
+  
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 240
+#define HEIGHT 128
+#define PAGE_HEIGHT 8
+
+
+/*
+  http://www.mark-products.com/graphics.htm#240x128%20Pixel%20Format
+*/
+
+static const uint8_t u8g_dev_lc7981_240x128_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(1),           /* instruction mode */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+  U8G_ESC_CS(1),             /* enable chip */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+  
+  
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x000,                                /* mode register */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x032,                                /* display on (bit 5), master mode on (bit 4), graphics mode on (bit 1)*/
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x001,                                /* character/bits per pixel pitch */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x007,                                /* 8 bits per pixel */
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x002,                                /* number of chars/byte width of the screen */
+  U8G_ESC_ADR(0),               /* data mode */
+  WIDTH/8-1,                         /* 8 bits per pixel */
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x003,                                /* time division */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x07f,                                /*  */
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x008,                                /* display start low */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /*  */
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x009,                                /* display start high */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /*  */
+    
+  U8G_ESC_DLY(10),               /* delay 10 ms */
+  
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_lc7981_240x128_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_lc7981_240x128_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        uint8_t y, i;
+        uint16_t disp_ram_adr;
+        uint8_t *ptr;
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        
+        u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        y = pb->p.page_y0;
+        ptr = pb->buf;
+        disp_ram_adr = WIDTH/8;
+        disp_ram_adr *= y;
+        for( i = 0; i < 8; i ++ )
+        {
+          u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x00a );      /* display ram (cursor) address low byte */
+          u8g_SetAddress(u8g, dev, 0);           /* data mode */
+          u8g_WriteByte(u8g, dev, disp_ram_adr & 0x0ff );  
+
+          u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x00b );      /* display ram (cursor) address hight byte */
+          u8g_SetAddress(u8g, dev, 0);           /* data mode */
+          u8g_WriteByte(u8g, dev, disp_ram_adr >> 8 );  
+          
+          u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x00c );      /* write data */
+          u8g_SetAddress(u8g, dev, 0);           /* data mode */
+          u8g_WriteSequence(u8g, dev, WIDTH/8, ptr);
+          ptr += WIDTH/8;
+          disp_ram_adr += WIDTH/8;
+        }
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+  }
+  return u8g_dev_pb8h1f_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_lc7981_240x128_8bit, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_lc7981_240x128_fn, U8G_COM_FAST_PARALLEL);
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_lc7981_240x64.c

@@ -0,0 +1,145 @@
+/*
+
+  u8g_dev_lc7981_240x64.c
+  
+  Tested with Nan Ya LM_J6_003_
+  
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 240
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+
+/*
+  http://www.mark-products.com/graphics.htm#240x64%20Pixel%20Format
+*/
+
+static const uint8_t u8g_dev_lc7981_240x64_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(1),           /* instruction mode */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+  U8G_ESC_CS(1),             /* enable chip */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+  
+  
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x000,                                /* mode register */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x032,                                /* display on (bit 5), master mode on (bit 4), graphics mode on (bit 1)*/
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x001,                                /* character/bits per pixel pitch */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x007,                                /* 8 bits per pixel */
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x002,                                /* number of chars/byte width of the screen */
+  U8G_ESC_ADR(0),               /* data mode */
+  WIDTH/8-1,                         /* 8 bits per pixel */
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x003,                                /* time division */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x07f,                                /*  */
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x008,                                /* display start low */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /*  */
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x009,                                /* display start high */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /*  */
+    
+  U8G_ESC_DLY(10),               /* delay 10 ms */
+  
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_lc7981_240x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_lc7981_240x64_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        uint8_t y, i;
+        uint16_t disp_ram_adr;
+        uint8_t *ptr;
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        
+        u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        y = pb->p.page_y0;
+        ptr = pb->buf;
+        disp_ram_adr = WIDTH/8;
+        disp_ram_adr *= y;
+        for( i = 0; i < 8; i ++ )
+        {
+          u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x00a );      /* display ram (cursor) address low byte */
+          u8g_SetAddress(u8g, dev, 0);           /* data mode */
+          u8g_WriteByte(u8g, dev, disp_ram_adr & 0x0ff );  
+
+          u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x00b );      /* display ram (cursor) address hight byte */
+          u8g_SetAddress(u8g, dev, 0);           /* data mode */
+          u8g_WriteByte(u8g, dev, disp_ram_adr >> 8 );  
+          
+          u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x00c );      /* write data */
+          u8g_SetAddress(u8g, dev, 0);           /* data mode */
+          u8g_WriteSequence(u8g, dev, WIDTH/8, ptr);
+          ptr += WIDTH/8;
+          disp_ram_adr += WIDTH/8;
+        }
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+  }
+  return u8g_dev_pb8h1f_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_lc7981_240x64_8bit, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_lc7981_240x64_fn, U8G_COM_FAST_PARALLEL);
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_lc7981_320x64.c

@@ -0,0 +1,145 @@
+/*
+
+  u8g_dev_lc7981_320x64.c
+
+  Note: Requires 16 bit mode (Must be enabled in u8g.h)
+  
+  Tested with Varitronix MGLS32064-03.pdf
+  
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 320
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+
+/*
+  http://www.gaw.ru/pdf/lcd/lcm/Varitronix/graf/MGLS32064-03.pdf
+*/
+
+static const uint8_t u8g_dev_lc7981_320x64_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(1),           /* instruction mode */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+  U8G_ESC_CS(1),             /* enable chip */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+  
+  
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x000,                                /* mode register */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x032,                                /* display on (bit 5), master mode on (bit 4), graphics mode on (bit 1)*/
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x001,                                /* character/bits per pixel pitch */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x007,                                /* 8 bits per pixel */
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x002,                                /* number of chars/byte width of the screen */
+  U8G_ESC_ADR(0),               /* data mode */
+  WIDTH/8-1,                         /* 8 bits per pixel */
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x003,                                /* time division */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x07f,                                /*  */
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x008,                                /* display start low */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /*  */
+
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x009,                                /* display start high */
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /*  */
+    
+  U8G_ESC_DLY(10),               /* delay 10 ms */
+  
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_lc7981_320x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_lc7981_320x64_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        uint8_t y, i;
+        uint16_t disp_ram_adr;
+        uint8_t *ptr;
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        
+        u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        y = pb->p.page_y0;
+        ptr = pb->buf;
+        disp_ram_adr = WIDTH/8;
+        disp_ram_adr *= y;
+        for( i = 0; i < 8; i ++ )
+        {
+          u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x00a );      /* display ram (cursor) address low byte */
+          u8g_SetAddress(u8g, dev, 0);           /* data mode */
+          u8g_WriteByte(u8g, dev, disp_ram_adr & 0x0ff );  
+
+          u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x00b );      /* display ram (cursor) address hight byte */
+          u8g_SetAddress(u8g, dev, 0);           /* data mode */
+          u8g_WriteByte(u8g, dev, disp_ram_adr >> 8 );  
+          
+          u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x00c );      /* write data */
+          u8g_SetAddress(u8g, dev, 0);           /* data mode */
+          u8g_WriteSequence(u8g, dev, WIDTH/8, ptr);
+          ptr += WIDTH/8;
+          disp_ram_adr += WIDTH/8;
+        }
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+  }
+  return u8g_dev_pb8h1f_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_lc7981_320x64_8bit, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_lc7981_320x64_fn, U8G_COM_FAST_PARALLEL);

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_null.c

@@ -0,0 +1,67 @@
+/*
+
+  u8g_dev_null.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+uint8_t u8g_dev_null(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_SET_8PIXEL:                /* most often used command */
+      break;
+    case U8G_DEV_MSG_SET_PIXEL:
+      break;
+    case U8G_DEV_MSG_INIT:
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_FIRST:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      break;
+#ifdef U8G_DEV_MSG_IS_BBX_INTERSECTION
+    case U8G_DEV_MSG_IS_BBX_INTERSECTION:
+      return 1;
+#endif
+    case U8G_DEV_MSG_GET_PAGE_BOX:
+      break;
+    case U8G_DEV_MSG_SET_COLOR_INDEX:
+      break;
+    case U8G_DEV_MSG_SET_XY_CB:
+      break;
+  }
+  return 1;
+}

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_pcd8544_84x48.c

@@ -0,0 +1,110 @@
+/*
+
+  u8g_dev_pcd8544_84x48.c
+  
+  Display: Nokia 84x48
+  
+  Status: Tested with PCF8812 Display
+  
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 84
+#define HEIGHT 48
+#define PAGE_HEIGHT 8
+
+
+static const uint8_t u8g_dev_pcd8544_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x021,		/* activate chip (PD=0), horizontal increment (V=0), enter extended command set (H=1) */
+  0x006,		/* temp. control: b10 = 2 */
+  0x013,		/* bias system 1:48 */
+  0x0c0,		/* medium Vop */
+  0x020,		/* activate chip (PD=0), horizontal increment (V=0), enter normal command set (H=0) */
+  0x00c,		/* display on, normal operation */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  0x020,		                /* activate chip (PD=0), horizontal increment (V=0), enter normal command set (H=0) */
+  0x00d,		                /* display on, invert */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  0x020,		                /* activate chip (PD=0), horizontal increment (V=0), enter normal command set (H=0) */
+  0x00c,		                /* display on, normal */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_pcd8544_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_pcd8544_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        u8g_SetAddress(u8g, dev, 0);           /* command mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        u8g_WriteByte(u8g, dev, 0x020 );		/* activate chip (PD=0), horizontal increment (V=0), enter normal command set (H=0) */
+        u8g_WriteByte(u8g, dev, 0x080 );                        /* set X address */
+        u8g_WriteByte(u8g, dev, 0x040 | pb->p.page); /* set Y address */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
+          return 0;
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      /* the contrast adjustment does not work, needs to be analysed */
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_WriteByte(u8g, dev, 0x021);        /* command mode, extended function set */
+      u8g_WriteByte(u8g, dev, 0x080 | ( (*(uint8_t *)arg) >> 1 ) );
+      u8g_SetChipSelect(u8g, dev, 0);
+      return 1;
+  }
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+
+U8G_PB_DEV(u8g_dev_pcd8544_84x48_sw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_pcd8544_fn, U8G_COM_SW_SPI);
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_pcf8812_96x65.c

@@ -0,0 +1,123 @@
+/*
+
+  u8g_dev_pcf8812_96x65.c
+  
+  Display: Nokia 96x65
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+
+  
+  om6206        comaptible to pcf8812 ?
+  
+  Status: Tested 
+
+
+  Display                                               Controller              Seen in
+  LPH7366 (9 pins, 84x48)                       PCD8544                Nokia 5110 / 5120 / 5130 / 5160 / 6110 / 6150 
+  LPH7677 (8 pins, 84x48)                       PCD8544                         Nokia 3210
+  LPH7779 (8 pins, 84x48)                       PCD8544                         Nokia 3310 / 3315 / 3330 / 3110, also 3410?
+  ???                                                          PCD8544                          Nokia 5110 / 6110
+  LPH7690 ?  (96x65)                                 PCF8455/OM6202          Nokia 3410
+  LPH7690 ? (96x65?)                               SED1565/S1D15605        Nokia 7110 / 3510?
+  LPH7690                                                     ???                                     Nokia 6210
+
+
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 96
+#define HEIGHT 65
+#define PAGE_HEIGHT 8
+
+
+static const uint8_t u8g_dev_pcf8812_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x021,		                /* activate chip (PD=0), horizontal increment (V=0), enter extended command set (H=1) */
+  0x006,		                /* temp. control: b10 = 2 */
+  0x013,		                /* bias system 1:48 */
+  0x080 | 0x040,		/* medium Vop */
+  0x020,		                /* activate chip (PD=0), horizontal increment (V=0), enter normal command set (H=0) */
+  0x00c,		                /* display on, normal operation */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  0x020,		                /* activate chip (PD=0), horizontal increment (V=0), enter normal command set (H=0) */
+  0x00d,		                /* display on, invert */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  0x020,		                /* activate chip (PD=0), horizontal increment (V=0), enter normal command set (H=0) */
+  0x00c,		                /* display on, normal */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_pcf8812_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_pcf8812_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        u8g_SetAddress(u8g, dev, 0);           /* command mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        u8g_WriteByte(u8g, dev, 0x020 );		/* activate chip (PD=0), horizontal increment (V=0), enter normal command set (H=0) */
+        u8g_WriteByte(u8g, dev, 0x080 );                        /* set X address */
+        u8g_WriteByte(u8g, dev, 0x040 | pb->p.page); /* set Y address */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
+          return 0;
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      /* the contrast adjustment does not work, needs to be analysed */
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_WriteByte(u8g, dev, 0x021);        /* command mode, extended function set */
+      u8g_WriteByte(u8g, dev, 0x080 | ( (*(uint8_t *)arg) >> 1 ) );
+      u8g_SetChipSelect(u8g, dev, 0);
+      return 1;
+  }
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+/* u8g_com_arduino_sw_spi_fn does not work, too fast??? */
+U8G_PB_DEV(u8g_dev_pcf8812_96x65_sw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_pcf8812_fn, U8G_COM_SW_SPI);

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_sbn1661_122x32.c

@@ -0,0 +1,107 @@
+/*
+
+  u8g_dev_sbn1661_122x32.c
+  
+  WG12232 display with 2xSBN1661 / SED1520 controller (122x32 display)
+  At the moment only available in the Arduino Environment
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 122
+#define HEIGHT 32
+#define PAGE_HEIGHT 8
+
+
+static const uint8_t u8g_dev_sbn1661_122x32_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip 1 */
+  0x0af,				/* display on */
+  0x0c0,				/* display start at line 0 */
+  0x0a0,				/* a0: ADC forward, a1: ADC reverse */
+  0x0a9,				/* a8: 1/16, a9: 1/32 duty */
+  U8G_ESC_CS(2),             /* enable chip 2 */
+  0x0af,				/* display on */
+  0x0c0,				/* display start at line 0 */
+  0x0a0,				/* a0: ADC forward, a1: ADC reverse */
+  0x0a9,				/* a8: 1/16, a9: 1/32 duty */
+  
+  U8G_ESC_CS(0),             /* disable chip */
+  
+  
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_sbn1661_122x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_sbn1661_122x32_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+	
+        u8g_SetAddress(u8g, dev, 0);           /* command mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        u8g_WriteByte(u8g, dev, 0x0b8 | pb->p.page); /* select current page (SBN1661/SED1520) */
+        u8g_WriteByte(u8g, dev, 0x000 ); /* set X address */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        u8g_WriteSequence(u8g, dev, WIDTH/2, pb->buf);
+	
+        u8g_SetAddress(u8g, dev, 0);           /* command mode */
+        u8g_SetChipSelect(u8g, dev, 2);
+        u8g_WriteByte(u8g, dev, 0x0b8 | pb->p.page); /* select current page (SBN1661/SED1520) */
+        u8g_WriteByte(u8g, dev, 0x000 ); /* set X address */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        u8g_WriteSequence(u8g, dev, WIDTH/2, WIDTH/2+(uint8_t *)pb->buf);
+	
+        u8g_SetChipSelect(u8g, dev, 0);
+	
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      break;
+  }
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+/* u8g_com_arduino_sw_spi_fn does not work, too fast??? */
+U8G_PB_DEV(u8g_dev_sbn1661_122x32 , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_sbn1661_122x32_fn, u8g_com_arduino_no_en_parallel_fn);

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_ssd1306_128x32.c

@@ -0,0 +1,247 @@
+/*
+
+  u8g_dev_ssd1306_128x32.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+
+  
+  23 Feb 2013: Fixed, Issue 147
+
+*/
+
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 32
+#define PAGE_HEIGHT 8
+
+
+/* init sequence adafruit 128x32 OLED (NOT TESTED) */
+static const uint8_t u8g_dev_ssd1306_128x32_adafruit1_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),        /* disable chip */
+  U8G_ESC_ADR(0),       /* instruction mode */
+  U8G_ESC_RST(1),       /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),        /* enable chip */
+
+  0x0ae,				/* display off, sleep mode */
+  0x0d5, 0x080,			/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
+  0x0a8, 0x03f,			/* */
+
+  0x0d3, 0x000,			/*  */
+
+  0x040,				/* start line */
+  
+  0x08d, 0x010,			/* [1] charge pump setting (p62): 0x014 enable, 0x010 disable */
+
+  0x020, 0x000,			/* */
+  0x0a1,				/* segment remap a0/a1*/
+  0x0c8,				/* c0: scan dir normal, c8: reverse */
+  0x0da, 0x012,			/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
+  0x081, 0x09f,			/* [1] set contrast control */
+  0x0d9, 0x022,			/* [1] pre-charge period 0x022/f1*/
+  0x0db, 0x040,			/* vcomh deselect level */
+  
+  0x02e,				/* 2012-05-27: Deactivate scroll */ 
+  0x0a4,				/* output ram to display */
+  0x0a6,				/* none inverted normal display mode */
+  0x0af,				/* display on */
+
+  U8G_ESC_CS(0),        /* disable chip */
+  U8G_ESC_END           /* end of sequence */
+};
+
+
+/* init sequence adafruit 128x32 OLED (NOT TESTED) */
+static const uint8_t u8g_dev_ssd1306_128x32_adafruit2_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),        /* disable chip */
+  U8G_ESC_ADR(0),       /* instruction mode */
+  U8G_ESC_RST(1),       /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),        /* enable chip */
+
+  0x0ae,				/* display off, sleep mode */
+  0x0d5, 0x080,			/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
+  0x0a8, 0x03f,			/* */
+
+  0x0d3, 0x000,			/*  */
+
+  0x040,				/* start line */
+  
+  0x08d, 0x014,			/* [2] charge pump setting (p62): 0x014 enable, 0x010 disable */
+
+  0x020, 0x000,			/* */
+  0x0a1,				/* segment remap a0/a1*/
+  0x0c8,				/* c0: scan dir normal, c8: reverse */
+  0x0da, 0x012,			/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
+  0x081, 0x0cf,			/* [2] set contrast control */
+  0x0d9, 0x0f1,			/* [2] pre-charge period 0x022/f1*/
+  0x0db, 0x040,			/* vcomh deselect level */
+  
+  0x02e,				/* 2012-05-27: Deactivate scroll */ 
+  0x0a4,				/* output ram to display */
+  0x0a6,				/* none inverted normal display mode */
+  0x0af,				/* display on */
+
+  U8G_ESC_CS(0),        /* disable chip */
+  U8G_ESC_END           /* end of sequence */
+};
+
+
+/* init sequence adafruit 128x32 OLED (TESTED - WORKING 23.02.13), like adafruit3, but with page addressing mode */
+static const uint8_t u8g_dev_ssd1306_128x32_adafruit3_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),        /* disable chip */
+  U8G_ESC_ADR(0),       /* instruction mode */
+  U8G_ESC_RST(1),		/* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),        /* enable chip */
+
+  0x0ae,				/* display off, sleep mode */
+  0x0d5, 0x080,			/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
+  0x0a8, 0x01f,			/* Feb 23, 2013: 128x32 OLED: 0x01f,  128x64 OLED 0x03f */
+
+  0x0d3, 0x000,			/*  */
+
+  0x040,				/* start line */
+  
+  0x08d, 0x014,			/* [2] charge pump setting (p62): 0x014 enable, 0x010 disable */ 
+
+  0x020, 0x002,			/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5), Feb 23, 2013: 128x32 OLED: 0x002,  128x64 OLED 0x012 */
+  0x0a1,				/* segment remap a0/a1*/
+  0x0c8,				/* c0: scan dir normal, c8: reverse */
+  0x0da, 0x002,			/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
+  0x081, 0x0cf,			/* [2] set contrast control */
+  0x0d9, 0x0f1,			/* [2] pre-charge period 0x022/f1*/
+  0x0db, 0x040,			/* vcomh deselect level */
+  
+  0x02e,				/* 2012-05-27: Deactivate scroll */ 
+  0x0a4,				/* output ram to display */
+  0x0a6,				/* none inverted normal display mode */
+  0x0af,				/* display on */
+
+  U8G_ESC_CS(0),        /* disable chip */
+  U8G_ESC_END           /* end of sequence */
+};
+
+
+/* init sequence Univision datasheet (NOT TESTED) */
+static const uint8_t u8g_dev_ssd1306_128x32_univision_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),        /* disable chip */
+  U8G_ESC_ADR(0),       /* instruction mode */
+  U8G_ESC_RST(1),       /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),        /* enable chip */
+
+  0x0ae,				/* display off, sleep mode */
+  0x0d5, 0x080,			/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
+  0x0a8, 0x03f,			/* multiplex ratio */
+  0x0d3, 0x000,			/* display offset */
+  0x040,				/* start line */
+  0x08d, 0x010,			/* charge pump setting (p62): 0x014 enable, 0x010 disable */
+  0x0a1,				/* segment remap a0/a1*/
+  0x0c8,				/* c0: scan dir normal, c8: reverse */
+  0x0da, 0x012,			/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
+  0x081, 0x09f,			/* set contrast control */
+  0x0d9, 0x022,			/* pre-charge period */
+  0x0db, 0x040,			/* vcomh deselect level */
+  0x022, 0x000,			/* page addressing mode WRONG: 3 byte cmd! */
+  0x0a4,				/* output ram to display */
+  0x0a6,				/* none inverted normal display mode */
+  0x0af,				/* display on */
+  U8G_ESC_CS(0),        /* disable chip */
+  U8G_ESC_END           /* end of sequence */
+};
+
+
+/* select one init sequence here */
+//define u8g_dev_ssd1306_128x32_init_seq u8g_dev_ssd1306_128x32_univision_init_seq
+//define u8g_dev_ssd1306_128x32_init_seq u8g_dev_ssd1306_128x32_adafruit1_init_seq
+//define u8g_dev_ssd1306_128x32_init_seq u8g_dev_ssd1306_128x32_adafruit2_init_seq
+#define u8g_dev_ssd1306_128x32_init_seq u8g_dev_ssd1306_128x32_adafruit3_init_seq
+
+
+static const uint8_t u8g_dev_ssd1306_128x32_data_start[] PROGMEM = {
+  U8G_ESC_ADR(0),       /* instruction mode */
+  U8G_ESC_CS(1),        /* enable chip */
+  0x010,				/* set upper 4 bit of the col adr. to 0 */
+  0x000,				/* set lower 4 bit of the col adr. to 4  */
+  U8G_ESC_END           /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0ae,		/* display off */      
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0af,		/* display on */      
+  U8G_ESC_DLY(50),       /* delay 50 ms */
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_ssd1306_128x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_data_start);    
+        u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page);	/* select current page (SSD1306) */
+        u8g_SetAddress(u8g, dev, 1);					/* data mode */
+        if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
+          return 0;
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
+      return 1;
+}
+  
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_ssd1306_128x32_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x32_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1306_128x32_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x32_fn, U8G_COM_HW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1306_128x32_i2c, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x32_fn, U8G_COM_SSD_I2C);
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_ssd1306_128x64.c

@@ -0,0 +1,237 @@
+/*
+
+  u8g_dev_ssd1306_128x64.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+/* init sequence adafruit 128x64 OLED (NOT TESTED) */
+static const uint8_t u8g_dev_ssd1306_128x64_adafruit1_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip */
+
+  0x0ae,				/* display off, sleep mode */
+  0x0d5, 0x080,		/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
+  0x0a8, 0x03f,		/* */
+
+  0x0d3, 0x000,		/*  */
+
+  0x040,				/* start line */
+  
+  0x08d, 0x010,		/* [1] charge pump setting (p62): 0x014 enable, 0x010 disable */
+
+  0x020, 0x000,		/* */
+  0x0a1,				/* segment remap a0/a1*/
+  0x0c8,				/* c0: scan dir normal, c8: reverse */
+  0x0da, 0x012,		/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
+  0x081, 0x09f,		/* [1] set contrast control */
+  0x0d9, 0x022,		/* [1] pre-charge period 0x022/f1*/
+  0x0db, 0x040,		/* vcomh deselect level */
+  
+  0x02e,				/* 2012-05-27: Deactivate scroll */ 
+  0x0a4,				/* output ram to display */
+  0x0a6,				/* none inverted normal display mode */
+  0x0af,				/* display on */
+
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+/* init sequence adafruit 128x64 OLED (NOT TESTED) */
+static const uint8_t u8g_dev_ssd1306_128x64_adafruit2_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip */
+
+  0x0ae,				/* display off, sleep mode */
+  0x0d5, 0x080,		/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
+  0x0a8, 0x03f,		/* */
+
+  0x0d3, 0x000,		/*  */
+
+  0x040,				/* start line */
+  
+  0x08d, 0x014,		/* [2] charge pump setting (p62): 0x014 enable, 0x010 disable */
+
+  0x020, 0x000,		/* */
+  0x0a1,				/* segment remap a0/a1*/
+  0x0c8,				/* c0: scan dir normal, c8: reverse */
+  0x0da, 0x012,		/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
+  0x081, 0x0cf,		/* [2] set contrast control */
+  0x0d9, 0x0f1,		/* [2] pre-charge period 0x022/f1*/
+  0x0db, 0x040,		/* vcomh deselect level */
+  
+  0x02e,				/* 2012-05-27: Deactivate scroll */ 
+  0x0a4,				/* output ram to display */
+  0x0a6,				/* none inverted normal display mode */
+  0x0af,				/* display on */
+
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+/* init sequence adafruit 128x64 OLED (NOT TESTED), like adafruit3, but with page addressing mode */
+static const uint8_t u8g_dev_ssd1306_128x64_adafruit3_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip */
+
+  0x0ae,				/* display off, sleep mode */
+  0x0d5, 0x080,		/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
+  0x0a8, 0x03f,		/* */
+
+  0x0d3, 0x000,		/*  */
+
+  0x040,				/* start line */
+  
+  0x08d, 0x014,		/* [2] charge pump setting (p62): 0x014 enable, 0x010 disable */
+
+  0x020, 0x002,		/* 2012-05-27: page addressing mode */
+  0x0a1,				/* segment remap a0/a1*/
+  0x0c8,				/* c0: scan dir normal, c8: reverse */
+  0x0da, 0x012,		/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
+  0x081, 0x0cf,		/* [2] set contrast control */
+  0x0d9, 0x0f1,		/* [2] pre-charge period 0x022/f1*/
+  0x0db, 0x040,		/* vcomh deselect level */
+  
+  0x02e,				/* 2012-05-27: Deactivate scroll */ 
+  0x0a4,				/* output ram to display */
+  0x0a6,				/* none inverted normal display mode */
+  0x0af,				/* display on */
+
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+/* init sequence Univision datasheet (NOT TESTED) */
+static const uint8_t u8g_dev_ssd1306_128x64_univision_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip */
+
+  0x0ae,				/* display off, sleep mode */
+  0x0d5, 0x080,		/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
+  0x0a8, 0x03f,		/* multiplex ratio */
+  0x0d3, 0x000,		/* display offset */
+  0x040,				/* start line */
+  0x08d, 0x010,		/* charge pump setting (p62): 0x014 enable, 0x010 disable */
+  0x0a1,				/* segment remap a0/a1*/
+  0x0c8,				/* c0: scan dir normal, c8: reverse */
+  0x0da, 0x012,		/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
+  0x081, 0x09f,		/* set contrast control */
+  0x0d9, 0x022,		/* pre-charge period */
+  0x0db, 0x040,		/* vcomh deselect level */
+  0x022, 0x000,		/* page addressing mode WRONG: 3 byte cmd! */
+  0x0a4,				/* output ram to display */
+  0x0a6,				/* none inverted normal display mode */
+  0x0af,				/* display on */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+/* select one init sequence here */
+//#define u8g_dev_ssd1306_128x64_init_seq u8g_dev_ssd1306_128x64_univision_init_seq
+//#define u8g_dev_ssd1306_128x64_init_seq u8g_dev_ssd1306_128x64_adafruit1_init_seq
+//#define u8g_dev_ssd1306_128x64_init_seq u8g_dev_ssd1306_128x64_adafruit2_init_seq
+#define u8g_dev_ssd1306_128x64_init_seq u8g_dev_ssd1306_128x64_adafruit3_init_seq
+
+
+static const uint8_t u8g_dev_ssd1306_128x64_data_start[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x010,		/* set upper 4 bit of the col adr to 0 */
+  0x000,		/* set lower 4 bit of the col adr to 4  */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0ae,		/* display off */      
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0af,		/* display on */      
+  U8G_ESC_DLY(50),       /* delay 50 ms */
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_ssd1306_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x64_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x64_data_start);    
+        u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (SSD1306) */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
+          return 0;
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_ssd1306_128x64_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x64_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1306_128x64_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x64_fn, U8G_COM_HW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1306_128x64_i2c, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x64_fn, U8G_COM_SSD_I2C);

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_ssd1309_128x64.c

@@ -0,0 +1,144 @@
+/*
+
+  u8g_dev_ssd1309_128x64.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+
+/* ssd1309 ini sequence*/
+static const uint8_t u8g_dev_ssd1309_128x64_init_seq[] PROGMEM={
+	U8G_ESC_CS(0),             /* disable chip */
+	U8G_ESC_ADR(0),           /* instruction mode */
+	U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
+	U8G_ESC_CS(1),             /* enable chip */
+	
+	0xfd,0x12,		/*Command Lock */
+	0xae,			/*Set Display Off */
+	0xd5,0xa0,		/*set Display Clock Divide Ratio/Oscillator Frequency */
+	0xa8,0x3f,		/*Set Multiplex Ratio */
+	0x3d,0x00,		/*Set Display Offset*/
+	0x40,			/*Set Display Start Line*/
+	0xa1,			/*Set Segment Re-Map*/
+	0xc8,			/*Set COM Output Scan Direction*/
+	0xda,0x12,		/*Set COM Pins Hardware Configuration*/
+	0x81,0xdf,		/*Set Current Control */
+	0xd9,0x82,		/*Set Pre-Charge Period */
+	0xdb,0x34,		/*Set VCOMH Deselect Level */
+	0xa4,			/*Set Entire Display On/Off */
+	0xa6,			/*Set Normal/Inverse Display*/
+	U8G_ESC_VCC(1),	/*Power up VCC & Stabilized */
+	U8G_ESC_DLY(50),
+	0xaf,			/*Set Display On */
+	U8G_ESC_DLY(50),
+	U8G_ESC_CS(0),             /* disable chip */
+	U8G_ESC_END                /* end of sequence */
+};
+
+/* select one init sequence here */
+  #define u8g_dev_ssd1309_128x64_init_seq u8g_dev_ssd1309_128x64_init_seq
+  
+  
+ static const uint8_t u8g_dev_ssd1309_128x64_data_start[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x010,		/* set upper 4 bit of the col adr to 0 */
+  0x000,		/* set lower 4 bit of the col adr to 4  */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0ae,		/* display off */      
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0af,		/* display on */      
+  U8G_ESC_DLY(50),       /* delay 50 ms */
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_ssd1309_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1309_128x64_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1309_128x64_data_start);    
+        u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (SSD1306) */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
+          return 0;
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      return 1; 
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_ssd1309_128x64_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1309_128x64_fn, U8G_COM_HW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1309_128x64_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1309_128x64_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1309_128x64_i2c, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1309_128x64_fn, U8G_COM_SSD_I2C);
+ 
+  

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_ssd1322_nhd31oled_bw.c

@@ -0,0 +1,334 @@
+/*
+
+  u8g_dev_ssd1322_nhd31oled_bw.c
+  
+  1-Bit (BW) Driver for SSD1322 Controller (OLED Display)
+  Tested with NHD-3.12-25664
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  SSD130x       Monochrom OLED Controller
+  SSD131x       Character OLED Controller
+  SSD132x       Graylevel OLED Controller
+  SSD1331       Color OLED Controller       
+
+*/
+
+#include "u8g.h"
+
+/* width must be multiple of 8, largest value is 248 unless u8g 16 bit mode is enabled */
+#if defined(U8G_16BIT)
+#define WIDTH 256
+#else
+#define WIDTH 248
+#endif
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+/* 
+  http://www.newhavendisplay.com/app_notes/OLED_25664.txt 
+  http://www.newhavendisplay.com/forum/viewtopic.php?f=15&t=3758
+*/
+
+static const uint8_t u8g_dev_ssd1322_1bit_nhd_312_init_seq[] PROGMEM = {
+  U8G_ESC_DLY(10),              /* delay 10 ms */
+  U8G_ESC_CS(0),                 /* disable chip */
+  U8G_ESC_ADR(0),               /* instruction mode */
+  U8G_ESC_RST(1),               /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),                /* enable chip */
+  
+  U8G_ESC_DLY(100),             /* delay 100 ms */
+  U8G_ESC_DLY(100),             /* delay 100 ms */
+  
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0fd,					/* lock command */
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x012,					/* unlock */
+  
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0ae,                               	 /* display off, sleep mode */
+  
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0b3, 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x091,                    /* set display clock divide ratio/oscillator frequency (set clock as 80 frames/sec) */
+  
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0ca, 					/* multiplex ratio */
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x03f,                    		/* 1/64 Duty (0x0F~0x3F) */
+  
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0a2, 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x000,                     		/* display offset, shift mapping ram counter */
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0a1, 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x000,                     		/* display start line */
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0a0, 					/* Set Re-Map / Dual COM Line Mode */
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x014, 					/* was 0x014 */                     		
+  0x011, 					/* was 0x011 */	
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0ab, 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x001,                     		/* Enable Internal VDD Regulator */
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0b4, 					/* Display Enhancement A */
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x0a0,                     		
+  0x005|0x0fd,                     		
+  
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0c1,					/* contrast */ 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x09f,                     		
+  
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0c7,					/* Set Scale Factor of Segment Output Current Control */ 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x00f,                     		
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0b9,                               	 /* linear gray scale */
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0b1,					/* Phase 1 (Reset) & Phase 2 (Pre-Charge) Period Adjustment */ 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x0e2,                     		
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0d1, 					/* Display Enhancement B */
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x082|0x020,                     		
+  0x020,                     		
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0bb,					/* precharge  voltage */ 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x01f,                     		
+  
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0b6,					/* precharge period */ 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x008,                     		
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0be,					/* vcomh */ 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x007,                     		
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0a6,                               	 /* normal display */
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0a9,                               	 /* exit partial display */
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0af,                               	 /* display on */
+
+
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd1322_1bit_nhd_312_prepare_page_seq[] PROGMEM = {
+  U8G_ESC_ADR(0),               /* instruction mode */
+  U8G_ESC_CS(1),                /* enable chip */
+  0x015,       /* column address... */
+  U8G_ESC_ADR(1),               /* data mode */
+  0x01c,       /* start at column 0 */
+  0x05b,       /* end column */
+  U8G_ESC_ADR(0),               /* instruction mode */
+  0x075,       /* row address... */
+  U8G_ESC_ADR(1),               /* data mode */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static void u8g_dev_ssd1322_1bit_prepare_row(u8g_t *u8g, u8g_dev_t *dev, uint8_t delta_row)
+{
+  uint8_t row = ((u8g_pb_t *)(dev->dev_mem))->p.page;
+  
+  row *= ((u8g_pb_t *)(dev->dev_mem))->p.page_height;
+  row += delta_row;
+  
+  u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1322_1bit_nhd_312_prepare_page_seq);
+  
+  u8g_WriteByte(u8g, dev, row);       /* start at the selected row */
+  u8g_WriteByte(u8g, dev, row+1);       /* end within the selected row */  
+  
+  u8g_SetAddress(u8g, dev, 0);          /* instruction mode mode */
+  u8g_WriteByte(u8g, dev, 0x05c);       /* write to ram */  
+  u8g_SetAddress(u8g, dev, 1);          /* data mode */
+}
+
+static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0ae,		/* display off */      
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0af,		/* display on */      
+  U8G_ESC_DLY(50),       /* delay 50 ms */
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+
+uint8_t u8g_dev_ssd1322_nhd31oled_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1322_1bit_nhd_312_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+	uint8_t i;
+	u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+	uint8_t *p = pb->buf;
+	u8g_uint_t cnt;
+	cnt = pb->width;
+	cnt >>= 3;
+
+	for( i = 0; i < pb->p.page_height; i++ )
+	{
+	  u8g_dev_ssd1322_1bit_prepare_row(u8g, dev, i);  /* this will also enable chip select */
+#if !defined(U8G_16BIT)
+	  u8g_WriteByte(u8g, dev, 0x0ff);
+	  u8g_WriteByte(u8g, dev, 0x0ff);
+#endif
+	  u8g_WriteSequenceBWTo16GrDevice(u8g, dev, cnt, p);
+#if !defined(U8G_16BIT)
+	  u8g_WriteByte(u8g, dev, 0x0ff);
+	  u8g_WriteByte(u8g, dev, 0x0ff);
+#endif
+	  u8g_SetChipSelect(u8g, dev, 0);        
+	  p+=cnt;
+	}
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_SetAddress(u8g, dev, 1);          /* data mode */
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      break;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);
+}
+
+
+uint8_t u8g_dev_ssd1322_nhd31oled_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1322_1bit_nhd_312_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+	uint8_t i;
+	u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+	uint8_t *p = pb->buf;
+	u8g_uint_t cnt;
+	cnt = pb->width;
+	cnt >>= 3;
+
+	for( i = 0; i < pb->p.page_height; i++ )
+	{
+	  u8g_dev_ssd1322_1bit_prepare_row(u8g, dev, i);		/* this will also enable chip select */
+#if !defined(U8G_16BIT)
+	  u8g_WriteByte(u8g, dev, 0x0ff);
+	  u8g_WriteByte(u8g, dev, 0x0ff);
+#endif
+	  u8g_WriteSequenceBWTo16GrDevice(u8g, dev, cnt, p);
+#if !defined(U8G_16BIT)
+	  u8g_WriteByte(u8g, dev, 0x0ff);
+	  u8g_WriteByte(u8g, dev, 0x0ff);
+#endif
+	  u8g_SetChipSelect(u8g, dev, 0);        
+	  p+=cnt;
+	}
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_SetAddress(u8g, dev, 1);          /* data mode */
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      break;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb16h1_base_fn(u8g, dev, msg, arg);
+}
+
+
+U8G_PB_DEV(u8g_dev_ssd1322_nhd31oled_bw_sw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1322_nhd31oled_bw_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1322_nhd31oled_bw_hw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1322_nhd31oled_bw_fn, U8G_COM_HW_SPI);
+
+#define DWIDTH (WIDTH*2)
+uint8_t u8g_dev_ssd1322_nhd31oled_2x_bw_buf[DWIDTH] U8G_NOCOMMON ; 
+u8g_pb_t u8g_dev_ssd1322_nhd31oled_2x_bw_pb = { {16, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_ssd1322_nhd31oled_2x_bw_buf}; 
+u8g_dev_t u8g_dev_ssd1322_nhd31oled_2x_bw_sw_spi = { u8g_dev_ssd1322_nhd31oled_2x_bw_fn, &u8g_dev_ssd1322_nhd31oled_2x_bw_pb, U8G_COM_SW_SPI };
+u8g_dev_t u8g_dev_ssd1322_nhd31oled_2x_bw_hw_spi = { u8g_dev_ssd1322_nhd31oled_2x_bw_fn, &u8g_dev_ssd1322_nhd31oled_2x_bw_pb, U8G_COM_HW_SPI };
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_ssd1322_nhd31oled_gr.c

@@ -0,0 +1,333 @@
+/*
+
+  u8g_dev_ssd1322_nhd31oled_gr.c
+  
+  2-Bit (4L) Driver for SSD1322 Controller (OLED Display)
+  Tested with NHD-3.12-25664
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  SSD130x       Monochrom OLED Controller
+  SSD131x       Character OLED Controller
+  SSD132x       Graylevel OLED Controller
+  SSD1331       Color OLED Controller       
+
+*/
+
+#include "u8g.h"
+
+/* width must be multiple of 8, largest value is 248 unless u8g 16 bit mode is enabled */
+#if defined(U8G_16BIT)
+#define WIDTH 256
+#else
+#define WIDTH 248
+#endif
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+/* 
+  http://www.newhavendisplay.com/app_notes/OLED_25664.txt 
+  http://www.newhavendisplay.com/forum/viewtopic.php?f=15&t=3758
+*/
+
+static const uint8_t u8g_dev_ssd1322_2bit_nhd_312_init_seq[] PROGMEM = {
+  U8G_ESC_DLY(10),              /* delay 10 ms */
+  U8G_ESC_CS(0),                 /* disable chip */
+  U8G_ESC_ADR(0),               /* instruction mode */
+  U8G_ESC_RST(1),               /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),                /* enable chip */
+  
+  U8G_ESC_DLY(100),             /* delay 100 ms */
+  U8G_ESC_DLY(100),             /* delay 100 ms */
+  
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0fd,					/* lock command */
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x012,					/* unlock */
+  
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0ae,                               	 /* display off, sleep mode */
+  
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0b3, 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x091,                    /* set display clock divide ratio/oscillator frequency (set clock as 80 frames/sec) */
+  
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0ca, 					/* multiplex ratio */
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x03f,                    		/* 1/64 Duty (0x0F~0x3F) */
+  
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0a2, 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x000,                     		/* display offset, shift mapping ram counter */
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0a1, 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x000,                     		/* display start line */
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0a0, 					/* Set Re-Map / Dual COM Line Mode */
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x014, 					/* was 0x014 */                     		
+  0x011, 					/* was 0x011 */	
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0ab, 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x001,                     		/* Enable Internal VDD Regulator */
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0b4, 					/* Display Enhancement A */
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x0a0,                     		
+  0x005|0x0fd,                     		
+  
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0c1,					/* contrast */ 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x09f,                     		
+  
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0c7,					/* Set Scale Factor of Segment Output Current Control */ 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x00f,                     		
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0b9,                               	 /* linear gray scale */
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0b1,					/* Phase 1 (Reset) & Phase 2 (Pre-Charge) Period Adjustment */ 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x0e2,                     		
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0d1, 					/* Display Enhancement B */
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x082|0x020,                     		
+  0x020,                     		
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0bb,					/* precharge  voltage */ 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x01f,                     		
+  
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0b6,					/* precharge period */ 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x008,                     		
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0be,					/* vcomh */ 
+  U8G_ESC_ADR(1),               	/* data mode */
+  0x007,                     		
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0a6,                               	 /* normal display */
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0a9,                               	 /* exit partial display */
+
+  U8G_ESC_ADR(0),               	/* instruction mode */
+  0x0af,                               	 /* display on */
+
+
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd1322_2bit_nhd_312_prepare_page_seq[] PROGMEM = {
+  U8G_ESC_ADR(0),               /* instruction mode */
+  U8G_ESC_CS(1),                /* enable chip */
+  0x015,       /* column address... */
+  U8G_ESC_ADR(1),               /* data mode */
+  0x01c,       /* start at column 0 */
+  0x05b,       /* end column */
+  U8G_ESC_ADR(0),               /* instruction mode */
+  0x075,       /* row address... */
+  U8G_ESC_ADR(1),               /* data mode */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static void u8g_dev_ssd1322_2bit_prepare_row(u8g_t *u8g, u8g_dev_t *dev, uint8_t delta_row)
+{
+  uint8_t row = ((u8g_pb_t *)(dev->dev_mem))->p.page;
+  
+  row *= ((u8g_pb_t *)(dev->dev_mem))->p.page_height;
+  row += delta_row;
+  
+  u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1322_2bit_nhd_312_prepare_page_seq);
+  
+  u8g_WriteByte(u8g, dev, row);       /* start at the selected row */
+  u8g_WriteByte(u8g, dev, row+1);       /* end within the selected row */  
+  
+  u8g_SetAddress(u8g, dev, 0);          /* instruction mode mode */
+  u8g_WriteByte(u8g, dev, 0x05c);       /* write to ram */  
+  u8g_SetAddress(u8g, dev, 1);          /* data mode */
+}
+
+static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0ae,		/* display off */      
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0af,		/* display on */      
+  U8G_ESC_DLY(50),       /* delay 50 ms */
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_ssd1322_nhd31oled_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1322_2bit_nhd_312_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+	uint8_t i;
+	u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+	uint8_t *p = pb->buf;
+	u8g_uint_t cnt;
+	cnt = pb->width;
+	cnt >>= 2;
+
+	for( i = 0; i < pb->p.page_height; i++ )
+	{
+	  u8g_dev_ssd1322_2bit_prepare_row(u8g, dev, i);  /* this will also enable chip select */
+#if !defined(U8G_16BIT)
+	  u8g_WriteByte(u8g, dev, 0x00);
+	  u8g_WriteByte(u8g, dev, 0x00);
+#endif
+	  u8g_WriteSequence4LTo16GrDevice(u8g, dev, cnt, p);
+#if !defined(U8G_16BIT)
+	  u8g_WriteByte(u8g, dev, 0x00);
+	  u8g_WriteByte(u8g, dev, 0x00);
+#endif
+	  u8g_SetChipSelect(u8g, dev, 0);        
+	  p+=cnt;
+	}
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_SetAddress(u8g, dev, 1);          /* data mode */
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      break;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb8h2_base_fn(u8g, dev, msg, arg);
+}
+
+
+uint8_t u8g_dev_ssd1322_nhd31oled_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1322_2bit_nhd_312_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+	uint8_t i;
+	u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+	uint8_t *p = pb->buf;
+	u8g_uint_t cnt;
+	cnt = pb->width;
+	cnt >>= 3;
+
+	for( i = 0; i < pb->p.page_height; i++ )
+	{
+	  u8g_dev_ssd1322_2bit_prepare_row(u8g, dev, i);		/* this will also enable chip select */
+#if !defined(U8G_16BIT)
+	  u8g_WriteByte(u8g, dev, 0x00);
+	  u8g_WriteByte(u8g, dev, 0x00);
+#endif
+	  u8g_WriteSequence4LTo16GrDevice(u8g, dev, cnt, p);
+#if !defined(U8G_16BIT)
+	  u8g_WriteByte(u8g, dev, 0x00);
+	  u8g_WriteByte(u8g, dev, 0x00);
+#endif
+	  u8g_SetChipSelect(u8g, dev, 0);        
+	  p+=cnt;
+	}
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_SetAddress(u8g, dev, 1);          /* data mode */
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      break;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb16h2_base_fn(u8g, dev, msg, arg);
+}
+
+
+U8G_PB_DEV(u8g_dev_ssd1322_nhd31oled_gr_sw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1322_nhd31oled_gr_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1322_nhd31oled_gr_hw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1322_nhd31oled_gr_fn, U8G_COM_HW_SPI);
+
+#define DWIDTH (WIDTH*2)
+uint8_t u8g_dev_ssd1322_nhd31oled_2x_gr_buf[DWIDTH] U8G_NOCOMMON ; 
+u8g_pb_t u8g_dev_ssd1322_nhd31oled_2x_gr_pb = { {16, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_ssd1322_nhd31oled_2x_gr_buf}; 
+u8g_dev_t u8g_dev_ssd1322_nhd31oled_2x_gr_sw_spi = { u8g_dev_ssd1322_nhd31oled_2x_gr_fn, &u8g_dev_ssd1322_nhd31oled_2x_gr_pb, U8G_COM_SW_SPI };
+u8g_dev_t u8g_dev_ssd1322_nhd31oled_2x_gr_hw_spi = { u8g_dev_ssd1322_nhd31oled_2x_gr_fn, &u8g_dev_ssd1322_nhd31oled_2x_gr_pb, U8G_COM_HW_SPI };
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_ssd1325_nhd27oled_bw.c

@@ -0,0 +1,263 @@
+/*
+
+  u8g_dev_ssd1325_nhd27oled_bw.c
+  
+  1-Bit (BW) Driver for SSD1325 Controller (OLED Display)
+  Tested with NHD-2.7-12864UCY3
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  SSD130x       Monochrom OLED Controller
+  SSD131x       Character OLED Controller
+  SSD132x       Graylevel OLED Controller
+  SSD1331       Color OLED Controller       
+
+*/
+
+#ifdef OBSOLETE_CODE
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+/* http://www.newhavendisplay.com/app_notes/OLED_2_7_12864.txt */
+static const uint8_t u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_init_seq[] PROGMEM = {
+  U8G_ESC_DLY(10),              /* delay 10 ms */
+  U8G_ESC_CS(0),                 /* disable chip */
+  U8G_ESC_ADR(0),               /* instruction mode */
+  U8G_ESC_RST(1),               /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),                /* enable chip */
+  0x0ae,                                /* display off, sleep mode */
+  0x0b3, 0x091,                    /* set display clock divide ratio/oscillator frequency (set clock as 135 frames/sec) */
+  0x0a8, 0x03f,                     /* multiplex ratio: 0x03f * 1/64 duty */
+  0x0a2, 0x04c,                     /* display offset, shift mapping ram counter */
+  0x0a1, 0x000,                     /* display start line */
+  0x0ad, 0x002,                     /* master configuration: disable embedded DC-DC, enable internal VCOMH */
+  0x0a0, 0x056,                     /* remap configuration, vertical address increment, enable nibble remap (upper nibble is left) */
+  0x086,                                /* full current range (0x084, 0x085, 0x086) */
+  0x0b8,                                /* set gray scale table */
+      0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x065, 0x076,
+  0x081, 0x070,                    /* contrast, brightness, 0..128, Newhaven: 0x040 */
+  0x0b2, 0x051,                    /* frame frequency (row period) */
+  0x0b1, 0x055,                    /* phase length */
+  0x0bc, 0x010,                    /* pre-charge voltage level */
+  0x0b4, 0x002,                    /* set pre-charge compensation level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+  0x0b0, 0x028,                    /* enable pre-charge compensation (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+  0x0be, 0x01c,                     /* VCOMH voltage */
+  0x0bf, 0x002|0x00d,           /* VSL voltage level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+  0x0a5,                                 /* all pixel on */
+  0x0af,                                  /* display on */
+  U8G_ESC_DLY(100),             /* delay 100 ms */
+  U8G_ESC_DLY(100),             /* delay 100 ms */
+  0x0a4,                                 /* normal display mode */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_prepare_page_seq[] PROGMEM = {
+  U8G_ESC_ADR(0),               /* instruction mode */
+  U8G_ESC_CS(1),                /* enable chip */
+  0x015,       /* column address... */
+  0x000,       /* start at column 0 */
+  0x03f,       /* end at column 63 (which is y == 127), because there are two pixel in one column */
+  0x075,       /* row address... */
+  U8G_ESC_END                /* end of sequence */
+};
+
+
+static void u8g_dev_ssd1325_1bit_prepare_page(u8g_t *u8g, u8g_dev_t *dev)
+{
+  uint8_t page = ((u8g_pb_t *)(dev->dev_mem))->p.page;
+  
+  u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_prepare_page_seq);
+  
+  page <<= 3;
+  u8g_WriteByte(u8g, dev, page);       /* start at the selected page */
+  page += 7;
+  u8g_WriteByte(u8g, dev, page);       /* end within the selected page */  
+  
+  u8g_SetAddress(u8g, dev, 1);          /* data mode */
+}
+
+static void u8g_dev_ssd1325_1bit_2x_prepare_page(u8g_t *u8g, u8g_dev_t *dev, uint8_t is_odd)
+{
+  uint8_t page = ((u8g_pb_t *)(dev->dev_mem))->p.page;
+  
+  u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_prepare_page_seq);
+  
+  page <<= 1;
+  page += is_odd;
+  
+  page <<= 3;
+  u8g_WriteByte(u8g, dev, page);       /* start at the selected page */
+  page += 7;
+  u8g_WriteByte(u8g, dev, page);       /* end within the selected page */  
+  
+  u8g_SetAddress(u8g, dev, 1);          /* data mode */
+}
+
+/* assumes row autoincrement and activated nibble remap */
+#ifdef OLD
+static  void _OLD_u8g_dev_ssd1325_1bit_write_16_pixel(u8g_t *u8g, u8g_dev_t *dev, uint8_t left, uint8_t right)
+{
+  uint8_t d, cnt;
+  cnt = 8;
+  do
+  {
+    d = 0;
+    if ( left & 1 )
+      d |= 0x0f0;
+    if ( right & 1 )
+      d |= 0x00f;
+    u8g_WriteByte(u8g, dev, d);
+    left >>= 1;
+    right >>= 1;
+    cnt--;
+  }while ( cnt > 0 );
+}
+#endif
+
+static  void u8g_dev_ssd1325_1bit_write_16_pixel(u8g_t *u8g, u8g_dev_t *dev, uint8_t left, uint8_t right)
+{
+  uint8_t d, cnt;
+  static uint8_t buf[8];
+  cnt = 8;
+  do
+  {
+    d = 0;
+    if ( left & 128 )
+      d |= 0x0f0;
+    if ( right & 128 )
+      d |= 0x00f;
+    cnt--;
+    buf[cnt] = d;
+    left <<= 1;
+    right <<= 1;
+  }while ( cnt > 0 );
+  u8g_WriteSequence(u8g, dev, 8, buf);
+}
+
+static void u8g_dev_ssd1325_1bit_write_buffer(u8g_t *u8g, u8g_dev_t *dev, uint8_t is_odd)
+{
+  uint8_t cnt, left, right;
+  uint8_t *ptr;
+  u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+  
+  ptr = pb->buf;
+  cnt = pb->width;
+  if ( is_odd )
+    ptr += cnt;
+  cnt >>= 1;
+  do
+  {
+    left = *ptr++;
+    right = *ptr++;
+    u8g_dev_ssd1325_1bit_write_16_pixel(u8g, dev, left, right);
+    cnt--;
+  } while( cnt > 0 );
+}
+
+uint8_t u8g_dev_ssd1325_nhd27oled_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_dev_ssd1325_1bit_prepare_page(u8g, dev);
+        u8g_dev_ssd1325_1bit_write_buffer(u8g, dev, 0);
+        u8g_SetChipSelect(u8g, dev, 0);        
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      break;
+  }
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_dev_ssd1325_1bit_2x_prepare_page(u8g, dev, 0);
+        u8g_dev_ssd1325_1bit_write_buffer(u8g, dev, 0);
+        u8g_dev_ssd1325_1bit_2x_prepare_page(u8g, dev, 1);
+        u8g_dev_ssd1325_1bit_write_buffer(u8g, dev, 1);
+        u8g_SetChipSelect(u8g, dev, 0);        
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      break;
+  }
+  return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
+}
+
+/* disabled, see bw_new.c */
+/*
+U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_sw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_hw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_HW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_parallel , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_FAST_PARALLEL);
+*/
+
+/*
+uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_buf[WIDTH*2] U8G_NOCOMMON ; 
+u8g_pb_t u8g_dev_ssd1325_nhd27oled_2x_bw_pb = { {16, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_ssd1325_nhd27oled_2x_bw_buf}; 
+u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_sw_spi = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_SW_SPI };
+u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_hw_spi = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_HW_SPI };
+u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_parallel = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_FAST_PARALLEL };
+*/
+
+#endif
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_ssd1325_nhd27oled_bw_new.c

@@ -0,0 +1,232 @@
+/*
+
+  u8g_dev_ssd1325_nhd27oled_bw.c
+  
+  1-Bit (BW) Driver for SSD1325 Controller (OLED Display)
+  Horizontal architecture, completly rewritten
+  Tested with NHD-2.7-12864UCY3
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  SSD130x       Monochrom OLED Controller
+  SSD131x       Character OLED Controller
+  SSD132x       Graylevel OLED Controller
+  SSD1331       Color OLED Controller       
+
+*/
+
+#include "u8g.h"
+
+/* width must be multiple of 8, largest value is 248 unless u8g 16 bit mode is enabled */
+#define WIDTH 128
+#define HEIGHT 64
+
+/* http://www.newhavendisplay.com/app_notes/OLED_2_7_12864.txt */
+static const uint8_t u8g_dev_ssd1325_nhd_27_12864_init_seq[] PROGMEM = {
+  U8G_ESC_DLY(10),              /* delay 10 ms */
+  U8G_ESC_CS(0),                 /* disable chip */
+  U8G_ESC_ADR(0),               /* instruction mode */
+  U8G_ESC_RST(1),               /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),                /* enable chip */
+  0x0ae,                                /* display off, sleep mode */
+  0x0b3, 0x091,                    /* set display clock divide ratio/oscillator frequency (set clock as 135 frames/sec) */
+  0x0a8, 0x03f,                     /* multiplex ratio: 0x03f * 1/64 duty */
+  0x0a2, 0x04c,                     /* display offset, shift mapping ram counter */
+  0x0a1, 0x000,                     /* display start line */
+  0x0ad, 0x002,                     /* master configuration: disable embedded DC-DC, enable internal VCOMH */
+  0x0a0, 0x052,                     /* remap configuration, horizontal address increment (bit 2 = 0), enable nibble remap (upper nibble is left, bit 1 = 1) */
+  0x086,                                /* full current range (0x084, 0x085, 0x086) */
+  0x0b8,                                /* set gray scale table */
+      0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x065, 0x076,
+  
+  0x081, 0x070,                    /* contrast, brightness, 0..128, Newhaven: 0x040 */
+  0x0b2, 0x051,                    /* frame frequency (row period) */
+  0x0b1, 0x055,                    /* phase length */
+  0x0bc, 0x010,                    /* pre-charge voltage level */
+  0x0b4, 0x002,                    /* set pre-charge compensation level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+  0x0b0, 0x028,                    /* enable pre-charge compensation (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+  0x0be, 0x01c,                     /* VCOMH voltage */
+  0x0bf, 0x002|0x00d,           /* VSL voltage level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+  0x0a4,                                 /* normal display mode */
+  0x0af,                                  /* display on */
+  U8G_ESC_DLY(50),             /* delay 50 ms */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd1325_prepare_row_seq[] PROGMEM = {
+  U8G_ESC_ADR(0),               /* instruction mode */
+  U8G_ESC_CS(1),                /* enable chip */
+  0x015,       /* column address... */
+  0x000,       /* start at column 0 */
+  0x03f,       /* end at column 63 (which is y == 127), because there are two pixel in one column */
+  0x075,       /* row address... */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static void u8g_dev_ssd1325_prepare_row(u8g_t *u8g, u8g_dev_t *dev, uint8_t delta_row)
+{
+  uint8_t row = ((u8g_pb_t *)(dev->dev_mem))->p.page;
+  
+  row *= ((u8g_pb_t *)(dev->dev_mem))->p.page_height;
+  row += delta_row;
+  
+  u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_prepare_row_seq);
+  
+  u8g_WriteByte(u8g, dev, row);       /* start at the selected row */
+  u8g_WriteByte(u8g, dev, row+1);       /* end within the selected row */  
+  
+  //u8g_SetAddress(u8g, dev, 0);          /* instruction mode mode */
+  //u8g_WriteByte(u8g, dev, 0x05c);       /* write to ram */  
+  u8g_SetAddress(u8g, dev, 1);          /* data mode */
+}
+
+static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0ae,		/* display off */      
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0af,		/* display on */      
+  U8G_ESC_DLY(50),       /* delay 50 ms */
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+
+static uint8_t u8g_dev_ssd1325_nhd27oled_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    //case U8G_DEV_MSG_IS_BBX_INTERSECTION:
+    //  return u8g_pb_IsIntersection((u8g_pb_t *)(dev->dev_mem), (u8g_dev_arg_bbx_t *)arg);
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_nhd_27_12864_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+	uint8_t i;
+	u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+	uint8_t *p = pb->buf;
+	u8g_uint_t cnt;
+	cnt = pb->width;
+	cnt >>= 3;
+
+	for( i = 0; i < pb->p.page_height; i++ )
+	{
+	  u8g_dev_ssd1325_prepare_row(u8g, dev, i);		/* this will also enable chip select */
+	  u8g_WriteSequenceBWTo16GrDevice(u8g, dev, cnt, p);
+	  u8g_SetChipSelect(u8g, dev, 0);        
+	  p+=cnt;
+	}
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      break;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);
+}
+
+static uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_nhd_27_12864_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+	uint8_t i;
+	u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+	uint8_t *p = pb->buf;
+	u8g_uint_t cnt;
+	cnt = pb->width;
+	cnt >>= 3;
+
+	for( i = 0; i < pb->p.page_height; i++ )
+	{
+	  u8g_dev_ssd1325_prepare_row(u8g, dev, i);		/* this will also enable chip select */
+	  u8g_WriteSequenceBWTo16GrDevice(u8g, dev, cnt, p);
+	  u8g_SetChipSelect(u8g, dev, 0);        
+	  p+=cnt;
+	}
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      break;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb16h1_base_fn(u8g, dev, msg, arg);
+}
+
+
+
+U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_sw_spi , WIDTH, HEIGHT, 8, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_hw_spi , WIDTH, HEIGHT, 8, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_HW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_parallel , WIDTH, HEIGHT, 8, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_FAST_PARALLEL);
+
+uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_buf[WIDTH*2] U8G_NOCOMMON ; 
+u8g_pb_t u8g_dev_ssd1325_nhd27oled_2x_bw_pb = { {16, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_ssd1325_nhd27oled_2x_bw_buf}; 
+u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_sw_spi = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_SW_SPI };
+u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_hw_spi = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_HW_SPI };
+u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_parallel = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_FAST_PARALLEL };
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_ssd1325_nhd27oled_gr.c

@@ -0,0 +1,255 @@
+/*
+
+  u8g_dev_ssd1325_nhd27oled_gr.c
+  
+  2-Bit (gray level) Driver for SSD1325 Controller (OLED Display)
+  Tested with NHD-2.7-12864UCY3
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  SSD130x       Monochrom OLED Controller
+  SSD131x       Character OLED Controller
+  SSD132x       Graylevel OLED Controller
+  SSD1331       Color OLED Controller       
+
+*/
+
+#ifdef OBSOLETE_CODE
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 64
+
+/* http://www.newhavendisplay.com/app_notes/OLED_2_7_12864.txt */
+static const uint8_t u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_init_seq[] PROGMEM = {
+  U8G_ESC_DLY(10),              /* delay 10 ms */
+  U8G_ESC_CS(0),                 /* disable chip */
+  U8G_ESC_ADR(0),               /* instruction mode */
+  U8G_ESC_RST(1),               /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),                /* enable chip */
+  0x0ae,                                /* display off, sleep mode */
+  0x0b3, 0x091,                    /* set display clock divide ratio/oscillator frequency (set clock as 135 frames/sec) */
+  0x0a8, 0x03f,                     /* multiplex ratio: 0x03f * 1/64 duty */
+  0x0a2, 0x04c,                     /* display offset, shift mapping ram counter */
+  0x0a1, 0x000,                     /* display start line */
+  0x0ad, 0x002,                     /* master configuration: disable embedded DC-DC, enable internal VCOMH */
+  0x0a0, 0x056,                     /* remap configuration, vertical address increment, enable nibble remap (upper nibble is left) */
+  0x086,                                /* full current range (0x084, 0x085, 0x086) */
+  0x0b8,                                /* set gray scale table */
+      //0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x065, 0x076,
+      0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x077, 0x077,            // 4L mode uses 0, 2, 4, 7
+  0x081, 0x070,                    /* contrast, brightness, 0..128, Newhaven: 0x040 */
+  0x0b2, 0x051,                    /* frame frequency (row period) */
+  0x0b1, 0x055,                    /* phase length */
+  0x0bc, 0x010,                    /* pre-charge voltage level */
+  0x0b4, 0x002,                    /* set pre-charge compensation level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+  0x0b0, 0x028,                    /* enable pre-charge compensation (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+  0x0be, 0x01c,                     /* VCOMH voltage */
+  0x0bf, 0x002|0x00d,           /* VSL voltage level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+  0x0a5,                                 /* all pixel on */
+  0x0af,                                  /* display on */
+  U8G_ESC_DLY(100),             /* delay 100 ms */
+  U8G_ESC_DLY(100),             /* delay 100 ms */
+  0x0a4,                                 /* normal display mode */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_prepare_page_seq[] PROGMEM = {
+  U8G_ESC_ADR(0),               /* instruction mode */
+  U8G_ESC_CS(1),                /* enable chip */
+  0x015,       /* column address... */
+  0x000,       /* start at column 0 */
+  0x03f,       /* end at column 63 (which is y == 127), because there are two pixel in one column */
+  0x075,       /* row address... */
+  U8G_ESC_END                /* end of sequence */
+};
+
+
+static void u8g_dev_ssd1325_2bit_prepare_page(u8g_t *u8g, u8g_dev_t *dev)
+{
+  uint8_t page = ((u8g_pb_t *)(dev->dev_mem))->p.page;
+  
+  u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_prepare_page_seq);
+  
+  page <<= 2;
+  u8g_WriteByte(u8g, dev, page);       /* start at the selected page */
+  page += 3;
+  u8g_WriteByte(u8g, dev, page);       /* end within the selected page */  
+  
+  u8g_SetAddress(u8g, dev, 1);          /* data mode */
+}
+
+static void u8g_dev_ssd1325_2bit_2x_prepare_page(u8g_t *u8g, u8g_dev_t *dev, uint8_t is_odd)
+{
+  uint8_t page = ((u8g_pb_t *)(dev->dev_mem))->p.page;
+  
+  u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_prepare_page_seq);
+  
+  page <<= 1;
+  page += is_odd;
+  
+  
+  page <<= 2;
+  u8g_WriteByte(u8g, dev, page);       /* start at the selected page */
+  page += 3;
+  u8g_WriteByte(u8g, dev, page);       /* end within the selected page */  
+  
+  u8g_SetAddress(u8g, dev, 1);          /* data mode */
+}
+
+/* assumes row autoincrement and activated nibble remap */
+static  void u8g_dev_ssd1325_2bit_write_4_pixel(u8g_t *u8g, u8g_dev_t *dev, uint8_t left, uint8_t right)
+{
+  uint8_t d, tmp, cnt;
+  cnt = 4;
+  do    
+  {
+    d = left;
+    d &= 3;
+    d <<= 4;    
+    tmp = right;    
+    tmp &= 3;
+    d |= tmp;
+    d <<= 2;
+    u8g_WriteByte(u8g, dev, d);
+    left >>= 2;
+    right >>= 2;
+    cnt--;
+  }while ( cnt > 0 );
+}
+
+static void u8g_dev_ssd1325_2bit_write_buffer(u8g_t *u8g, u8g_dev_t *dev)
+{
+  uint8_t cnt, left, right;
+  uint8_t *ptr;
+  u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+  
+  cnt = pb->width;
+  cnt >>= 1;
+  ptr = pb->buf;
+  do
+  {
+    left = *ptr++;
+    right = *ptr++;
+    u8g_dev_ssd1325_2bit_write_4_pixel(u8g, dev, left, right);
+    cnt--;
+  } while( cnt > 0 );
+}
+
+static void u8g_dev_ssd1325_2bit_2x_write_buffer(u8g_t *u8g, u8g_dev_t *dev, uint8_t is_odd)
+{
+  uint8_t cnt, left, right;
+  uint8_t *ptr;
+  u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+  
+  ptr = pb->buf;
+  cnt = pb->width;
+  if ( is_odd )
+    ptr += cnt;
+  cnt >>= 1;
+  do
+  {
+    left = *ptr++;
+    right = *ptr++;
+    u8g_dev_ssd1325_2bit_write_4_pixel(u8g, dev, left, right);
+    cnt--;
+  } while( cnt > 0 );
+}
+
+static uint8_t u8g_dev_ssd1325_nhd27oled_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_dev_ssd1325_2bit_prepare_page(u8g, dev);
+        u8g_dev_ssd1325_2bit_write_buffer(u8g, dev);
+        u8g_SetChipSelect(u8g, dev, 0);        
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      return 1;
+  }
+  return u8g_dev_pb8v2_base_fn(u8g, dev, msg, arg);
+}
+
+static uint8_t u8g_dev_ssd1325_nhd27oled_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_dev_ssd1325_2bit_2x_prepare_page(u8g, dev, 0);
+        u8g_dev_ssd1325_2bit_2x_write_buffer(u8g, dev, 0);
+        u8g_dev_ssd1325_2bit_2x_prepare_page(u8g, dev, 1);
+        u8g_dev_ssd1325_2bit_2x_write_buffer(u8g, dev, 1);
+        u8g_SetChipSelect(u8g, dev, 0);        
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      return 1;
+  }
+  return u8g_dev_pb16v2_base_fn(u8g, dev, msg, arg);
+}
+
+//U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_gr_sw_spi , WIDTH, HEIGHT, 4, u8g_dev_ssd1325_nhd27oled_gr_fn, U8G_COM_SW_SPI);
+//U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_gr_hw_spi , WIDTH, HEIGHT, 4, u8g_dev_ssd1325_nhd27oled_gr_fn, U8G_COM_HW_SPI);
+
+//uint8_t u8g_dev_ssd1325_nhd27oled_2x_buf[WIDTH*2] U8G_NOCOMMON ; 
+//u8g_pb_t u8g_dev_ssd1325_nhd27oled_2x_pb = { {8, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_ssd1325_nhd27oled_2x_buf}; 
+//u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_gr_sw_spi = { u8g_dev_ssd1325_nhd27oled_2x_gr_fn, &u8g_dev_ssd1325_nhd27oled_2x_pb, U8G_COM_SW_SPI };
+//u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_gr_hw_spi = { u8g_dev_ssd1325_nhd27oled_2x_gr_fn, &u8g_dev_ssd1325_nhd27oled_2x_pb, U8G_COM_HW_SPI };
+
+
+#endif /* OBSOLETE_CODE */

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_ssd1325_nhd27oled_gr_new.c

@@ -0,0 +1,227 @@
+/*
+
+  u8g_dev_ssd1325_nhd27oled_gr.c
+  
+  2-Bit (gray level) Driver for SSD1325 Controller (OLED Display)
+  Rewritten with new architecture
+  Tested with NHD-2.7-12864UCY3
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  SSD130x       Monochrom OLED Controller
+  SSD131x       Character OLED Controller
+  SSD132x       Graylevel OLED Controller
+  SSD1331       Color OLED Controller       
+
+*/
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 64
+
+/* http://www.newhavendisplay.com/app_notes/OLED_2_7_12864.txt */
+static const uint8_t u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_init_seq[] PROGMEM = {
+  U8G_ESC_DLY(10),              /* delay 10 ms */
+  U8G_ESC_CS(0),                 /* disable chip */
+  U8G_ESC_ADR(0),               /* instruction mode */
+  U8G_ESC_RST(1),               /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),                /* enable chip */
+  0x0ae,                                /* display off, sleep mode */
+  0x0b3, 0x091,                    /* set display clock divide ratio/oscillator frequency (set clock as 135 frames/sec) */
+  0x0a8, 0x03f,                     /* multiplex ratio: 0x03f * 1/64 duty */
+  0x0a2, 0x04c,                     /* display offset, shift mapping ram counter */
+  0x0a1, 0x000,                     /* display start line */
+  0x0ad, 0x002,                     /* master configuration: disable embedded DC-DC, enable internal VCOMH */
+  0x0a0, 0x052,                     /* remap configuration, horizontal address increment (bit 2 = 0), enable nibble remap (upper nibble is left, bit 1 = 1), old values: 0x0a0 0x0a6 */
+  0x086,                                /* full current range (0x084, 0x085, 0x086) */
+  0x0b8,                                /* set gray scale table */
+      //0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x065, 0x076,
+      0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x077, 0x077,            // 4L mode uses 0, 2, 4, 7
+  0x081, 0x070,                    /* contrast, brightness, 0..128, Newhaven: 0x040 */
+  0x0b2, 0x051,                    /* frame frequency (row period) */
+  0x0b1, 0x055,                    /* phase length */
+  0x0bc, 0x010,                    /* pre-charge voltage level */
+  0x0b4, 0x002,                    /* set pre-charge compensation level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+  0x0b0, 0x028,                    /* enable pre-charge compensation (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+  0x0be, 0x01c,                     /* VCOMH voltage */
+  0x0bf, 0x002|0x00d,           /* VSL voltage level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+  0x0a4,                                 /* normal display mode */
+  0x0af,                                  /* display on */
+  U8G_ESC_DLY(50),             /* delay 50 ms */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_prepare_page_seq[] PROGMEM = {
+  U8G_ESC_ADR(0),               /* instruction mode */
+  U8G_ESC_CS(1),                /* enable chip */
+  0x015,       /* column address... */
+  0x000,       /* start at column 0 */
+  0x03f,       /* end at column 63 (which is y == 127), because there are two pixel in one column */
+  0x075,       /* row address... */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static void u8g_dev_ssd1325_gr_prepare_row(u8g_t *u8g, u8g_dev_t *dev, uint8_t delta_row)
+{
+  uint8_t row = ((u8g_pb_t *)(dev->dev_mem))->p.page;
+  
+  row *= ((u8g_pb_t *)(dev->dev_mem))->p.page_height;
+  row += delta_row;
+  
+  u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_prepare_page_seq);
+  
+  u8g_WriteByte(u8g, dev, row);       /* start at the selected row */
+  u8g_WriteByte(u8g, dev, row+1);       /* end within the selected row */  
+  
+  //u8g_SetAddress(u8g, dev, 0);          /* instruction mode mode */
+  //u8g_WriteByte(u8g, dev, 0x05c);       /* write to ram */  
+  u8g_SetAddress(u8g, dev, 1);          /* data mode */
+}
+
+static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0ae,		/* display off */      
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0af,		/* display on */      
+  U8G_ESC_DLY(50),       /* delay 50 ms */
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+
+
+static uint8_t u8g_dev_ssd1325_nhd27oled_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+	uint8_t i;
+	u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+	uint8_t *p = pb->buf;
+	u8g_uint_t cnt;
+	cnt = pb->width;
+	cnt >>= 2;
+
+	for( i = 0; i < pb->p.page_height; i++ )
+	{
+	  u8g_dev_ssd1325_gr_prepare_row(u8g, dev, i);		/* this will also enable chip select */
+	  u8g_WriteSequence4LTo16GrDevice(u8g, dev, cnt, p);
+	  u8g_SetChipSelect(u8g, dev, 0);        
+	  p+=cnt;
+	}
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      return 1;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb8h2_base_fn(u8g, dev, msg, arg);
+}
+
+
+
+static uint8_t u8g_dev_ssd1325_nhd27oled_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+	uint8_t i;
+	u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+	uint8_t *p = pb->buf;
+	u8g_uint_t cnt;
+	cnt = pb->width;
+	cnt >>= 2;
+
+	for( i = 0; i < pb->p.page_height; i++ )
+	{
+	  u8g_dev_ssd1325_gr_prepare_row(u8g, dev, i);		/* this will also enable chip select */
+	  u8g_WriteSequence4LTo16GrDevice(u8g, dev, cnt, p);
+	  u8g_SetChipSelect(u8g, dev, 0);        
+	  p+=cnt;
+	}
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      return 1;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb16h2_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_gr_sw_spi , WIDTH, HEIGHT, 4, u8g_dev_ssd1325_nhd27oled_gr_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_gr_hw_spi , WIDTH, HEIGHT, 4, u8g_dev_ssd1325_nhd27oled_gr_fn, U8G_COM_HW_SPI);
+
+uint8_t u8g_dev_ssd1325_nhd27oled_2x_buf[WIDTH*2] U8G_NOCOMMON ; 
+u8g_pb_t u8g_dev_ssd1325_nhd27oled_2x_pb = { {8, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_ssd1325_nhd27oled_2x_buf}; 
+u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_gr_sw_spi = { u8g_dev_ssd1325_nhd27oled_2x_gr_fn, &u8g_dev_ssd1325_nhd27oled_2x_pb, U8G_COM_SW_SPI };
+u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_gr_hw_spi = { u8g_dev_ssd1325_nhd27oled_2x_gr_fn, &u8g_dev_ssd1325_nhd27oled_2x_pb, U8G_COM_HW_SPI };

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_ssd1327_96x96_gr.c

@@ -0,0 +1,299 @@
+/*
+
+  u8g_dev_ssd1327_96x96_gr.c
+  
+  2-Bit (graylevel) Driver for SSD1327 Controller (OLED Display)
+  Tested with Seedstudio 96x96 Oled (LY120)
+  http://www.seeedstudio.com/wiki/index.php?title=Twig_-_OLED_96x96
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  SSD130x       Monochrom OLED Controller
+  SSD131x       Character OLED Controller
+  SSD132x       Graylevel OLED Controller
+  SSD1331       Color OLED Controller       
+
+*/
+
+#include "u8g.h"
+
+#define WIDTH 96
+#define HEIGHT 96
+#define XOFFSET 8
+
+/*  
+  http://www.seeedstudio.com/wiki/index.php?title=Twig_-_OLED_96x96
+*/
+static const uint8_t u8g_dev_ssd1327_2bit_96x96_init_seq[] PROGMEM = {
+  U8G_ESC_DLY(10),              /* delay 10 ms */
+  U8G_ESC_CS(0),                 /* disable chip */
+  U8G_ESC_ADR(0),               /* instruction mode */
+  U8G_ESC_RST(1),               /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),                /* enable chip */
+  0x0fd, 0x012,			/* unlock display, usually not required because the display is unlocked after reset */
+  0x0ae,             			/* display off, sleep mode */
+  0x0a8, 0x05f,			/* multiplex ratio: 0x05f * 1/64 duty */
+  0x0a1, 0x000,            		/* display start line */
+  0x0a2, 0x060,           		/* display offset, shift mapping ram counter */
+  //0x0a2, 0x04c,           		/* NHD: display offset, shift mapping ram counter */
+  0x0a0, 0x046,  			/* remap configuration, vertical address increment, enable nibble remap (upper nibble is left) */
+  //0x0a0, 0x056,  			/* NHD: remap configuration, vertical address increment, enable nibble remap (upper nibble is left) */
+  0x0ab, 0x001,			/* Enable internal VDD regulator (RESET) */
+  0x081, 0x053,          		/* contrast, brightness, 0..128, Newhaven: 0x040, LY120 0x053, 0x070 seems also ok */
+  0x0b1, 0x051,          		/* phase length */
+  0x0b3, 0x001,           		/* set display clock divide ratio/oscillator frequency */
+  0x0b9,					/* use linear lookup table */
+#if 0
+  0x0b8,                                /* set gray scale table */
+      //0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x065, 0x076,
+      0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x077, 0x077,            // 4L mode uses 0, 2, 4, 7
+#endif  
+  0x0bc, 0x008,                    	/* pre-charge voltage level */
+  0x0be, 0x007,                     	/* VCOMH voltage */
+  0x0b6, 0x001,			/* second precharge */
+  0x0d5, 0x062,			/* enable second precharge, internal vsl (bit0 = 0) */
+  
+#if 0
+  // the following commands are not used by the SeeedGrayOLED sequence */
+  0x0ad, 0x002,                     /* master configuration: disable embedded DC-DC, enable internal VCOMH */
+  0x086,                                /* full current range (0x084, 0x085, 0x086) */
+  0x0b2, 0x051,                    /* frame frequency (row period) */
+  0x0b4, 0x002,                    /* set pre-charge compensation level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+  0x0b0, 0x028,                    /* enable pre-charge compensation (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+  0x0bf, 0x002|0x00d,           /* VSL voltage level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+#endif 
+
+  0x0a5,                                 /* all pixel on */
+  //0x02e,					/* no scroll (according to SeeedGrayOLED sequence) */
+  0x0af,                                  /* display on */
+  U8G_ESC_DLY(100),             /* delay 100 ms */
+  0x0a4,                                 /* normal display mode */
+  U8G_ESC_DLY(100),             /* delay 100 ms */
+  0x0a5,                                 /* all pixel on */
+  0x0af,                                  /* display on */
+  U8G_ESC_DLY(100),             /* delay 100 ms */
+  0x0a4,                                 /* normal display mode */
+  
+  0x015,       /* column address... */
+  0x008,       /* start at column 8, special for the LY120 ??? */
+  0x037,       /* end at column 55, note: there are two pixel in one column */
+  
+  0x075,       /* row address... */
+  0x008,       
+  0x05f,       
+  
+  U8G_ESC_ADR(1),               /* data mode */
+  0x000f, 0x000f, 0x0000, 0x0000, 0x000f,0x000f,0x0000,0x0000,
+  0x000f, 0x000f, 0x0000, 0x0000, 0x000f,0x000f,0x0000,0x0000,
+  0x000f, 0x000f, 0x0000, 0x0000, 0x000f,0x000f,0x0000,0x0000,
+  0x000f, 0x000f, 0x0000, 0x0000, 0x000f,0x000f,0x0000,0x0000,
+  
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd1327_2bit_96x96_prepare_page_seq[] PROGMEM = {
+  U8G_ESC_ADR(0),               /* instruction mode */
+  U8G_ESC_CS(1),                /* enable chip */
+  0x015,       /* column address... */
+  XOFFSET,       /* start at column 8, special for the LY120 ??? */
+  0x037,       /* end at column 55, note: there are two pixel in one column */
+  0x075,       /* row address... */
+  U8G_ESC_END                /* end of sequence */
+};
+
+
+static void u8g_dev_ssd1327_2bit_prepare_page(u8g_t *u8g, u8g_dev_t *dev)
+{
+  uint8_t page = ((u8g_pb_t *)(dev->dev_mem))->p.page;
+  
+  u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1327_2bit_96x96_prepare_page_seq);
+  
+  page <<= 2;
+  u8g_WriteByte(u8g, dev, page);       /* start at the selected page */
+  page += 3;
+  u8g_WriteByte(u8g, dev, page);       /* end within the selected page */  
+  
+  u8g_SetAddress(u8g, dev, 1);          /* data mode */
+}
+
+static void u8g_dev_ssd1327_2bit_2x_prepare_page(u8g_t *u8g, u8g_dev_t *dev, uint8_t is_odd)
+{
+  uint8_t page = ((u8g_pb_t *)(dev->dev_mem))->p.page;
+  
+  u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1327_2bit_96x96_prepare_page_seq);
+  
+  page <<= 1;
+  page += is_odd;
+  
+  page <<= 2;
+  u8g_WriteByte(u8g, dev, page);       /* start at the selected page */
+  page += 3;
+  u8g_WriteByte(u8g, dev, page);       /* end within the selected page */  
+  
+  u8g_SetAddress(u8g, dev, 1);          /* data mode */
+}
+
+/* assumes row autoincrement and activated nibble remap */
+static  void u8g_dev_ssd1327_2bit_write_4_pixel(u8g_t *u8g, u8g_dev_t *dev, uint8_t left, uint8_t right)
+{
+  uint8_t d, tmp, cnt;
+  static uint8_t buf[4];
+  buf[0] = 0;
+  buf[1] = 0;
+  buf[2] = 0;
+  buf[3] = 0;
+  cnt = 0;
+  do 
+  {
+    if ( left == 0 && right == 0 )
+      break;
+    d = left;
+    d &= 3;
+    d <<= 4;    
+    tmp = right;    
+    tmp &= 3;
+    d |= tmp;
+    d <<= 2;
+    buf[cnt] = d;
+    left >>= 2;
+    right >>= 2;
+    cnt++;
+  }while ( cnt < 4 );
+  u8g_WriteSequence(u8g, dev, 4, buf);
+}
+
+static void u8g_dev_ssd1327_2bit_write_buffer(u8g_t *u8g, u8g_dev_t *dev)
+{
+  uint8_t cnt, left, right;
+  uint8_t *ptr;
+  u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+  
+  cnt = pb->width;
+  cnt >>= 1;
+  ptr = pb->buf;
+  do
+  {
+    left = *ptr++;
+    right = *ptr++;
+    u8g_dev_ssd1327_2bit_write_4_pixel(u8g, dev, left, right);
+    cnt--;
+  } while( cnt > 0 );
+}
+
+static void u8g_dev_ssd1327_2bit_2x_write_buffer(u8g_t *u8g, u8g_dev_t *dev, uint8_t is_odd)
+{
+  uint8_t cnt, left, right;
+  uint8_t *ptr;
+  u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+  
+  ptr = pb->buf;
+  cnt = pb->width;
+  if ( is_odd )
+    ptr += cnt;
+  cnt >>= 1;
+  do
+  {
+    left = *ptr++;
+    right = *ptr++;
+    u8g_dev_ssd1327_2bit_write_4_pixel(u8g, dev, left, right);
+    cnt--;
+  } while( cnt > 0 );
+}
+
+uint8_t u8g_dev_ssd1327_96x96_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1327_2bit_96x96_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_dev_ssd1327_2bit_prepare_page(u8g, dev);
+        u8g_dev_ssd1327_2bit_write_buffer(u8g, dev);
+        u8g_SetChipSelect(u8g, dev, 0);        
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      return 1;
+  }
+  return u8g_dev_pb8v2_base_fn(u8g, dev, msg, arg);
+}
+
+uint8_t u8g_dev_ssd1327_96x96_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1327_2bit_96x96_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_dev_ssd1327_2bit_2x_prepare_page(u8g, dev, 0);
+        u8g_dev_ssd1327_2bit_2x_write_buffer(u8g, dev, 0);
+        u8g_dev_ssd1327_2bit_2x_prepare_page(u8g, dev, 1);
+        u8g_dev_ssd1327_2bit_2x_write_buffer(u8g, dev, 1);
+        u8g_SetChipSelect(u8g, dev, 0);        
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      return 1;
+  }
+  return u8g_dev_pb16v2_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_ssd1327_96x96_gr_sw_spi , WIDTH, HEIGHT, 4, u8g_dev_ssd1327_96x96_gr_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1327_96x96_gr_hw_spi , WIDTH, HEIGHT, 4, u8g_dev_ssd1327_96x96_gr_fn, U8G_COM_HW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1327_96x96_gr_i2c , WIDTH, HEIGHT, 4, u8g_dev_ssd1327_96x96_gr_fn, U8G_COM_SSD_I2C);
+
+#define DWIDTH (2*WIDTH)
+uint8_t u8g_dev_ssd1327_96x96_2x_buf[DWIDTH] U8G_NOCOMMON ; 
+u8g_pb_t u8g_dev_ssd1327_96x96_2x_pb = { {8, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_ssd1327_96x96_2x_buf}; 
+u8g_dev_t u8g_dev_ssd1327_96x96_2x_gr_sw_spi = { u8g_dev_ssd1327_96x96_2x_gr_fn, &u8g_dev_ssd1327_96x96_2x_pb, U8G_COM_SW_SPI };
+u8g_dev_t u8g_dev_ssd1327_96x96_2x_gr_hw_spi = { u8g_dev_ssd1327_96x96_2x_gr_fn, &u8g_dev_ssd1327_96x96_2x_pb, U8G_COM_HW_SPI };
+u8g_dev_t u8g_dev_ssd1327_96x96_2x_gr_i2c = { u8g_dev_ssd1327_96x96_2x_gr_fn, &u8g_dev_ssd1327_96x96_2x_pb, U8G_COM_SSD_I2C };
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_st7565_64128n.c

@@ -0,0 +1,153 @@
+/*
+
+  u8g_dev_st7565_64128n.c (Displaytech)
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+/* init sequence from https://github.com/adafruit/ST7565-LCD/blob/master/ST7565/ST7565.cpp */
+static const uint8_t u8g_dev_st7565_64128n_init_seq[] PROGMEM = {
+ 	 U8G_ESC_CS(0),            /* disable chip */
+	  U8G_ESC_ADR(0),          /* instruction mode */
+	  U8G_ESC_CS(1),           /* enable chip */
+	  U8G_ESC_RST(15),         /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+
+	  0x0A2,   				   /* 0x0a2: LCD bias 1/9 (according to Displaytech 64128N datasheet) */
+	  0x0A0,  				   /* Normal ADC Select (according to Displaytech 64128N datasheet) */
+
+	  0x0c8,                   /* common output mode: set scan direction normal operation/SHL Select, 0x0c0 --> SHL = 0, normal, 0x0c8 --> SHL = 1 */
+	  0x040,		           /* Display start line for Displaytech 64128N */
+
+	  0x028 | 0x04,            /* power control: turn on voltage converter */
+	  U8G_ESC_DLY(50),         /* delay 50 ms */
+
+	  0x028 | 0x06,            /* power control: turn on voltage regulator */
+	  U8G_ESC_DLY(50),         /* delay 50 ms */
+
+	  0x028 | 0x07,            /* power control: turn on voltage follower */
+	  U8G_ESC_DLY(50),         /* delay 50 ms */
+
+	  0x010,                   /* Set V0 voltage resistor ratio. Setting for controlling brightness of Displaytech 64128N */
+
+	  0x0a6,                   /* display normal, bit val 0: LCD pixel off. */
+
+	  0x081,      	           /* set contrast */
+	  0x01e,        	       /* Contrast value. Setting for controlling brightness of Displaytech 64128N */
+
+
+	  0x0af,		           /* display on */
+
+	  U8G_ESC_DLY(100),        /* delay 100 ms */
+	  0x0a5,		           /* display all points, ST7565 */
+	  U8G_ESC_DLY(100),        /* delay 100 ms */
+	  U8G_ESC_DLY(100),        /* delay 100 ms */
+	  0x0a4,		           /* normal display */
+	  U8G_ESC_CS(0),           /* disable chip */
+	  U8G_ESC_END              /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_64128n_data_start[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),            /* enable chip */
+  0x010,	                /* set upper 4 bit of the col adr to 0x10 */
+  0x000,		            /* set lower 4 bit of the col adr to 0x00. Changed for DisplayTech 64128N */      
+  U8G_ESC_END               /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_64128n_sleep_on[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0ac,		/* static indicator off */
+  0x000,		                /* indicator register set (not sure if this is required) */
+  0x0ae,		/* display off */      
+  0x0a5,		/* all points on */      
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_64128n_sleep_off[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0a4,		/* all points off */      
+  0x0af,		/* display on */      
+  U8G_ESC_DLY(50),       /* delay 50 ms */
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_st7565_64128n_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_data_start);    
+        u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (ST7565R) */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
+          return 0;
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      return 1;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_st7565_64128n_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_64128n_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_st7565_64128n_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_64128n_fn, U8G_COM_HW_SPI);
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_st7565_dogm128.c

@@ -0,0 +1,140 @@
+/*
+
+  u8g_dev_st7565_dogm128.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+const uint8_t u8g_dev_st7565_dogm128_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip */
+  
+  0x040,		                /* set display start line */
+  0x0a1,		                /* ADC set to reverse */
+  0x0c0,		                /* common output mode: set scan direction normal operation */
+  0x0a6,                           /* display normal (none reverse) */
+  0x0a2,		                /* LCD bias 1/9 */
+  0x02f,		                /* all power  control circuits on */
+  0x0f8,		                /* set booster ratio to */
+  0x000,		                /* 4x */
+  0x027,		                /* set V0 voltage resistor ratio to large */
+  0x081,		                /* set contrast */
+  0x018,		                /* contrast value, EA default: 0x016 */
+  0x0ac,		                /* indicator */
+  0x000,		                /* disable */
+  0x0a4,		                /* normal display (not all on) */
+  0x0af,		                /* display on */
+  U8G_ESC_DLY(50),       /* delay 50 ms */
+
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_dogm128_data_start[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x010,		/* set upper 4 bit of the col adr to 0 */
+  0x000,		/* set lower 4 bit of the col adr to 0 */      
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_dogm128_sleep_on[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0ac,		/* static indicator off */
+  0x000,		                /* indicator register set (not sure if this is required) */
+  0x0ae,		/* display off */      
+  0x0a5,		/* all points on */      
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_dogm128_sleep_off[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0a4,		/* all points off */      
+  0x0af,		/* display on */      
+  U8G_ESC_DLY(50),       /* delay 50 ms */
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_st7565_dogm128_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_dogm128_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_dogm128_data_start);    
+        u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (ST7565R) */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
+          return 0;
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      return 1;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_dogm128_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_dogm128_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_st7565_dogm128_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_dogm128_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_st7565_dogm128_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_dogm128_fn, U8G_COM_HW_SPI);
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_st7565_dogm132.c

@@ -0,0 +1,157 @@
+/*
+
+  u8g_dev_st7565_dogm132.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 132
+#define HEIGHT 32
+#define PAGE_HEIGHT 8
+
+static const uint8_t u8g_dev_st7565_dogm132_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip */
+
+  0x040,		/* set display start line to 0 */
+  0x0a1,		/* ADC set to reverse */
+  0x0c0,		/* common output mode */
+  0x0a6,		/* display normal, bit val 0: LCD pixel off. */
+  0x0a2,		/* LCD bias 1/9 */
+  0x02f,		/* all power  control circuits on */
+  0x0f8,		/* set booster ratio to */
+  0x000,		/* 4x */
+  0x023,		/* set V0 voltage resistor ratio to large */
+  0x081,		/* set contrast */
+  0x01f,		/* contrast value, EA default: 0x01f */
+  0x0ac,		/* indicator */
+  0x000,		/* disable */
+  0x0af,		/* display on */
+
+#ifdef OBSOLETE_DOGM128  
+  0x040,		                /* set display start line */
+  0x0c8,		                /* set scan direction inverse operation */
+  0x0a2,		                /* LCD bias 1/9 */
+  0x02f,		                /* all power  control circuits on */
+  0x0f8,		                /* set booster ratio to */
+  0x000,		                /* 4x */
+  0x027,		                /* set V0 voltage resistor ratio to large */
+  0x081,		                /* set contrast */
+  0x018,		                /* contrast value, EA default: 0x016 */
+  0x0ac,		                /* indicator */
+  0x000,		                /* disable */
+  0x0af,		                /* display on */
+#endif
+
+
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  0x0a5,		                /* display all points, ST7565 */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  0x0a4,		                /* normal display */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_dogm132_data_start[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x010,		/* set upper 4 bit of the col adr to 0 */
+  0x000,		/* set lower 4 bit of the col adr to 0  */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_dogm132_sleep_on[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0ac,		/* static indicator off */
+  0x000,		                /* indicator register set (not sure if this is required) */
+  0x0ae,		/* display off */      
+  0x0a5,		/* all points on */      
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_dogm132_sleep_off[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0a4,		/* all points off */      
+  0x0af,		/* display on */      
+  U8G_ESC_DLY(50),       /* delay 50 ms */
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_st7565_dogm132_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_dogm132_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_dogm132_data_start);    
+        u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (ST7565R) */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
+          return 0;
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      return 1;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_dogm132_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_dogm132_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_st7565_dogm132_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_dogm132_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_st7565_dogm132_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_dogm132_fn, U8G_COM_HW_SPI);

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_st7565_lm6059.c

@@ -0,0 +1,157 @@
+/*
+
+  u8g_dev_st7565_lm6059.c (Adafruit display)
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+/* init sequence from https://github.com/adafruit/ST7565-LCD/blob/master/ST7565/ST7565.cpp */
+static const uint8_t u8g_dev_st7565_lm6059_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+
+  0x0a3,		                /* 0x0a2: LCD bias 1/9 (suggested for the LM6063), 0x0a3: Used by Adafruit, 0x0a2 does not work */
+  /* the LM6059 vs LM6063, ADC and SHL have inverted settings */
+  0x0a0,		                /* 0x0a1: ADC set to normal (suggested for the LM6059), 0x0a0: Used by Adafruit -> normal mode */
+  0x0c8,                            /* common output mode: set scan direction normal operation/SHL Select, 0x0c0 --> SHL = 0, normal, 0x0c8 --> SHL = 1 */
+  0x060,		                /* set display start line */
+  
+  0x028 | 0x04,                 /* power control: turn on voltage converter */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+
+  0x028 | 0x06,                 /* power control: turn on voltage regulator */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+  
+  0x028 | 0x07,                 /* power control: turn on voltage follower */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+
+  0x026,		                /* set V0 voltage resistor ratio to 6 (Adafruit Value, no info from LM6063 Manual) */
+  
+  0x0a6,                           /* display normal, bit val 0: LCD pixel off. */
+  
+  0x081,		                /* set contrast */
+  0x018,		                /* contrast value*/
+  
+  /*0x0ac,*/		                /* indicator */
+  /*0x000,*/		                /* disable */
+  
+  0x0af,		                /* display on */
+
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  0x0a5,		                /* display all points, ST7565 */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  0x0a4,		                /* normal display */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_lm6059_data_start[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x010,		/* set upper 4 bit of the col adr to 0 */
+  0x001,		/* set lower 4 bit of the col adr  */      
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_lm6059_sleep_on[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0ac,		/* static indicator off */
+  0x000,		                /* indicator register set (not sure if this is required) */
+  0x0ae,		/* display off */      
+  0x0a5,		/* all points on */      
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_lm6059_sleep_off[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0a4,		/* all points off */      
+  0x0af,		/* display on */      
+  U8G_ESC_DLY(50),       /* delay 50 ms */
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+
+uint8_t u8g_dev_st7565_lm6059_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_data_start);    
+        u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (ST7565R) */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
+          return 0;
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      return 1;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_st7565_lm6059_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_lm6059_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_st7565_lm6059_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_lm6059_fn, U8G_COM_HW_SPI);
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_st7565_lm6063.c

@@ -0,0 +1,188 @@
+/*
+
+  u8g_dev_st7565_lm6063.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+#ifdef OLD_ADAFRUIT_CODE
+static const uint8_t OLD_u8g_dev_st7565_lm6063_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip */
+  
+  0x040,		                /* set display start line */
+  0x0a1,		                /* ADC set to reverse */
+  0x0c8,		                /* common output mode: set scan direction normal operation/SHL Select / 17 Jan: seems to be a bug, must be 0x0c0 */
+  0x0a6,                           /* display normal, bit val 0: LCD pixel off. */
+  0x0a2,		                /* LCD bias 1/9 */
+  0x02f,		                /* all power  control circuits on */
+  /*0x0f8,*/		                /* set booster ratio to */
+  /*0x000,	*/	                /* 4x */
+  /*0x027,*/		                /* set V0 voltage resistor ratio to large */
+  0x081,		                /* set contrast */
+  0x018,		                /* contrast value*/
+  0x0ac,		                /* indicator */
+  0x000,		                /* disable */
+  0x0af,		                /* display on */
+
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  0x0a5,		                /* display all points, ST7565 */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  0x0a4,		                /* normal display */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+#endif
+
+/* init sequence from https://github.com/adafruit/ST7565-LCD/blob/master/ST7565/ST7565.cpp */
+static const uint8_t u8g_dev_st7565_lm6063_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+
+  0x0a3,		                /* 0x0a2: LCD bias 1/9 (suggested for the LM6063), 0x0a3: Used by Adafruit */
+  0x0a1,		                /* 0x0a1: ADC set to reverse (suggested for the LM6063), 0x0a0: Used by Adafruit -> normal mode */
+  0x0c0,                            /* common output mode: set scan direction normal operation/SHL Select, 0x0c0 --> SHL = 0, normal, 0x0c8 --> SHL = 1 */
+  0x040,		                /* set display start line */
+  
+  0x028 | 0x04,                 /* power control: turn on voltage converter */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+
+  0x028 | 0x06,                 /* power control: turn on voltage regulator */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+  
+  0x028 | 0x07,                 /* power control: turn on voltage follower */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+
+  0x026,		                /* set V0 voltage resistor ratio to 6 (Adafruit Value, no info from LM6063 Manual) */
+  
+  0x0a6,                           /* display normal, bit val 0: LCD pixel off. */
+  
+  0x081,		                /* set contrast */
+  0x018,		                /* contrast value*/
+  
+  /*0x0ac,*/		                /* indicator */
+  /*0x000,*/		                /* disable */
+  
+  0x0af,		                /* display on */
+
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  0x0a5,		                /* display all points, ST7565 */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  0x0a4,		                /* normal display */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_lm6063_data_start[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x010,		/* set upper 4 bit of the col adr to 0 */
+  0x000,		/* set lower 4 bit of the col adr to 0 */      
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_st7565_sleep_on[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0ac,		/* static indicator off */
+  0x000,		                /* indicator register set (not sure if this is required) */
+  0x0ae,		/* display off */      
+  0x0a5,		/* all points on */      
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_st7565_sleep_off[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0a4,		/* all points off */      
+  0x0af,		/* display on */      
+  U8G_ESC_DLY(50),       /* delay 50 ms */
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+
+uint8_t u8g_dev_st7565_lm6063_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6063_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6063_data_start);    
+        u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (ST7565R) */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
+          return 0;
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      return 1;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_st7565_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_st7565_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_st7565_lm6063_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_lm6063_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_st7565_lm6063_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_lm6063_fn, U8G_COM_HW_SPI);
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_st7565_nhd_c12832.c

@@ -0,0 +1,143 @@
+/*
+
+  u8g_dev_st7565_nhd_c12832.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 32
+#define PAGE_HEIGHT 8
+
+static const uint8_t u8g_dev_st7565_c12832_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip */
+
+  0x040,		/* set display start line to 0 */
+  0x0a0,		/* ADC set, values: a0=normal, a1=reverse */
+  0x0c8,		/* common output mode: c0=normal, c8=reverse */
+  0x0a6,		/* display normal, bit val 0: LCD pixel off. */
+  0x0a2,		/* LCD bias 1/9 */
+  0x02f,		/* all power  control circuits on */
+  0x0f8,		/* set booster ratio to */
+  0x000,		/* 4x */
+  0x023,		/* set V0 voltage resistor ratio to large */
+  0x081,		/* set contrast */
+  0x00a,		/* contrast value */
+  0x0ac,		/* indicator */
+  0x000,		/* disable */
+  0x0af,		/* display on */
+
+
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  0x0a5,		                /* display all points, ST7565 */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  0x0a4,		                /* normal display */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_c12832_data_start[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x010,		/* set upper 4 bit of the col adr to 0 */
+  0x000,		/* set lower 4 bit of the col adr to 0  */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_c12832_sleep_on[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0ac,		/* static indicator off */
+  0x000,		                /* indicator register set (not sure if this is required) */
+  0x0ae,		/* display off */      
+  0x0a5,		/* all points on */      
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_c12832_sleep_off[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0a4,		/* all points off */      
+  0x0af,		/* display on */      
+  U8G_ESC_DLY(50),       /* delay 50 ms */
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_st7565_c12832_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_c12832_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_c12832_data_start);    
+        u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (ST7565R) */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
+          return 0;
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      return 1;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_c12832_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_c12832_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_st7565_nhd_c12832_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_c12832_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_st7565_nhd_c12832_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_c12832_fn, U8G_COM_HW_SPI);
+U8G_PB_DEV(u8g_dev_st7565_nhd_c12832_parallel, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_c12832_fn, U8G_COM_PARALLEL);

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_st7565_nhd_c12864.c

@@ -0,0 +1,145 @@
+/*
+
+  u8g_dev_st7565_nhd_c12864.c
+
+  Support for the NHD-C12864A1Z-FSB-FBW (Newhaven Display)
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+const uint8_t u8g_dev_st7565_nhd_c12864_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(10),           /* do reset low pulse with (10*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip */
+  
+  0x040,		                /* set display start line */
+  0x0a1,		                /* ADC set to reverse */
+  0x0c0,		                /* common output mode: set scan direction normal operation */
+  0x0a6,                           /* display normal, bit val 0: LCD pixel off. */
+  0x0a2,		                /* LCD bias 1/9 */
+  0x02f,		                /* all power  control circuits on */
+  0x0f8,		                /* set booster ratio to */
+  0x000,		                /* 4x */
+  0x027,		                /* set V0 voltage resistor ratio to large */
+  0x081,		                /* set contrast */
+  0x008,		                /* contrast: 0x008 is a good value for NHD C12864, Nov 2012: User reports that 0x1a is much better */
+  0x0ac,		                /* indicator */
+  0x000,		                /* disable */
+  0x0af,		                /* display on */
+
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  0x0a5,		                /* display all points, ST7565 */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  U8G_ESC_DLY(100),       /* delay 100 ms */
+  0x0a4,		                /* normal display */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_nhd_c12864_data_start[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x010,		/* set upper 4 bit of the col adr to 0 */
+  0x004,		/* set lower 4 bit of the col adr to 4 (NHD C12864) */  
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_c12864_sleep_on[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0ac,		/* static indicator off */
+  0x000,		                /* indicator register set (not sure if this is required) */
+  0x0ae,		/* display off */      
+  0x0a5,		/* all points on */      
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_c12864_sleep_off[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0a4,		/* all points off */      
+  0x0af,		/* display on */      
+  U8G_ESC_DLY(50),       /* delay 50 ms */
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_st7565_nhd_c12864_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_nhd_c12864_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_nhd_c12864_data_start);    
+        u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (ST7565R) */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
+          return 0;
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+    case U8G_DEV_MSG_CONTRAST:
+      u8g_SetChipSelect(u8g, dev, 1);
+      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
+      u8g_WriteByte(u8g, dev, 0x081);
+      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
+      u8g_SetChipSelect(u8g, dev, 0);      
+      return 1;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_c12864_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_c12864_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_st7565_nhd_c12864_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_nhd_c12864_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_st7565_nhd_c12864_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_nhd_c12864_fn, U8G_COM_HW_SPI);
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_st7687_c144mvgd.c

@@ -0,0 +1,420 @@
+/*
+
+  u8g_dev_st7687_c144mvgd.c (1.44" TFT)
+  
+  Status: Started, but not finished
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2012, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 128
+#define PAGE_HEIGHT 8
+
+
+#ifdef FIRST_VERSION
+/* 
+see also: read.pudn.com/downloads115/sourcecode/app/484503/LCM_Display.c__.htm 
+http://en.pudn.com/downloads115/sourcecode/app/detail484503_en.html
+*/
+
+static const uint8_t u8g_dev_st7687_c144mvgd_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+  
+  0x001,                        /* A0=0, SW reset */
+  U8G_ESC_DLY(200),         /* delay 200 ms */
+  
+  0x0d7,                        /* EEPROM data auto re-load control */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x09f,                             /* ARD = 1 */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_DLY(100),         /* delay 100 ms */
+  
+  0x0e0,                        /* EEPROM control in */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x000,                             /*  */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_DLY(100),         /* delay 100 ms */
+  
+#ifdef NOT_REQUIRED  
+  0x0fa,                        /* EEPROM function selection 8.1.66 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x000,                             /*  */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_DLY(100),         /* delay 100 ms */
+#endif 
+
+  0x0e3,                        /* Read from EEPROM, 8.1.55 */
+  U8G_ESC_DLY(100),         /* delay 100 ms */
+
+  0x0e1,                        /* EEPROM control out, 8.1.53 */
+  U8G_ESC_DLY(100),         /* delay 100 ms */
+  
+  //0x028,                        /* display off */
+  0x011,                                /* Sleep out & booster on */
+  U8G_ESC_DLY(100),         /* delay 100 ms */
+  
+  0x0c0,                        /* Vop setting, 8.1.42 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x000,                             /*  */
+  0x001,                             /*  3.6 + 256*0.04 = 13.84 Volt */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_DLY(100),         /* delay 100 ms */
+  
+  0x0c3,                                /* Bias selection, 8.1.45 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x003,
+  U8G_ESC_ADR(0),           /* instruction mode */
+  
+  0x0c4,                                /* Booster setting 8.1.46 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x007,
+  U8G_ESC_ADR(0),           /* instruction mode */
+  
+  0x0c5,                                /* ??? */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x001,
+  U8G_ESC_ADR(0),           /* instruction mode */
+  
+  0x0cb,                                /* FV3 with Booster x2 control, 8.1.47 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x001,
+  U8G_ESC_ADR(0),           /* instruction mode */
+  
+  0x036,                                /* Memory data access control, 8.1.28 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x080,
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+  0x0b5,                                /* N-line control, 8.1.37 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x089,
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+
+  0x0d0,                                /* Analog circuit setting, 8.1.49 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x01d,
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+  0x0b7,                                /* Com/Seg Scan Direction, 8.1.38 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x040,
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+  0x025,                                /* Write contrast, 8.1.17 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x03f,
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+  0x03a,                                /* Interface pixel format, 8.1.32 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x004,                                /* 3: 12 bit per pixel Type A, 4: 12 bit Type B, 5: 16bit per pixel */
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+  0x0b0,                                /* Display Duty setting, 8.1.34 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x07f,
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+  0x0f0,                                /* Frame Freq. in Temp range A,B,C and D, 8.1.59 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x007,
+  0x00c,
+  0x00c,
+  0x015,
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+  0x0f9,                                /* Frame RGB Value, 8.1.65 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x000,
+  0x005,
+  0x008,
+  0x00a,
+  0x00c,
+  0x00e,
+  0x010,
+  0x011,
+  0x012,
+  0x013,
+  0x014,
+  0x015,
+  0x016,
+  0x018,
+  0x01a,
+  0x01b,
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+  0x0f9,                                /* Frame RGB Value, 8.1.65 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x000,
+  0x000,
+  0x000,
+  0x000,
+  0x033,
+  0x055,
+  0x055,
+  0x055,
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+  0x029,                        /* display on */
+
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+
+};
+
+#else
+
+/*
+http://www.waitingforfriday.com/images/e/e3/FTM144D01N_test.zip
+*/
+
+static const uint8_t u8g_dev_st7687_c144mvgd_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+
+  0x011,                                /* Sleep out & booster on */
+  U8G_ESC_DLY(5),         /* delay 5 ms */
+    
+  0x03a,                                /* Interface pixel format, 8.1.32 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x004,                                /* 3: 12 bit per pixel Type A, 4: 12 bit Type B, 5: 16bit per pixel */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  
+  
+  0x026,                                /* SET_GAMMA_CURVE */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x004,                                
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+  0x0f2,                                /* GAM_R_SEL */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x001,                                /* enable gamma adj */                                
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+
+  0x0e0,                                /* POSITIVE_GAMMA_CORRECT */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x3f,
+    0x25,
+    0x1c,
+    0x1e,
+    0x20,
+    0x12,
+    0x2a,
+    0x90,
+    0x24,
+    0x11,
+    0x00,
+    0x00,
+    0x00,
+    0x00,
+    0x00,    
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+  0x0e1,                                /* NEGATIVE_GAMMA_CORRECT */
+  U8G_ESC_ADR(1),           /* data mode */
+    0x20,
+    0x20,
+    0x20,
+    0x20,
+    0x05,
+    0x00,
+    0x15,
+    0xa7,
+    0x3d,
+    0x18,
+    0x25,
+    0x2a,
+    0x2b,
+    0x2b,
+    0x3a,
+  U8G_ESC_ADR(0),           /* instruction mode */
+     
+  0x0b1,                                /* FRAME_RATE_CONTROL1 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x008,                                /* DIVA = 8 */
+  0x008,                                /* VPA = 8 */
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+
+  0x0b4,                                /* DISPLAY_INVERSION */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x007,                                /* NLA = 1, NLB = 1, NLC = 1 (all on Frame Inversion) */
+  U8G_ESC_ADR(0),           /* instruction mode */
+    
+  0x0c0,                                /* POWER_CONTROL1 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x00a,                                /* VRH = 10:  GVDD = 4.30 */
+  0x002,                                /* VC = 2: VCI1 = 2.65 */
+  U8G_ESC_ADR(0),           /* instruction mode */
+   
+  0x0c1,                                /* POWER_CONTROL2 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x002,                                /* BT = 2: AVDD = 2xVCI1, VCL = -1xVCI1, VGH = 5xVCI1, VGL = -2xVCI1 */
+  U8G_ESC_ADR(0),           /* instruction mode */
+      
+  0x0c5,                                /* VCOM_CONTROL1 */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x050,                                /* VMH = 80: VCOMH voltage = 4.5 */
+  0x05b,                                /* VML = 91: VCOML voltage = -0.225 */
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+  0x0c7,                                /* VCOM_OFFSET_CONTROL */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x040,                                /* nVM = 0, VMF = 64: VCOMH output = VMH, VCOML output = VML */
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+  0x02a,                                /* SET_COLUMN_ADDRESS */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x000,                                /*  */
+  0x000,                                /*  */
+  0x000,                                /*  */
+  0x07f,                                /*  */
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+  0x02b,                                /* SET_PAGE_ADDRESS */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x000,                                /*  */
+  0x000,                                /*  */
+  0x000,                                /*  */
+  0x07f,                                /*  */
+  U8G_ESC_ADR(0),           /* instruction mode */
+
+  0x036,                                /* SET_ADDRESS_MODE */
+  U8G_ESC_ADR(1),           /* data mode */
+  0x000,                                /* Select display orientation */
+  U8G_ESC_ADR(0),           /* instruction mode */
+	
+
+  0x029,                        /* display on */
+  
+  0x02c,                         /* write start */
+  
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+
+};
+
+#endif
+
+
+
+
+/* calculate bytes for Type B 4096 color display */
+static uint8_t get_byte_1(uint8_t v)
+{
+  v >>= 4;
+  v &= 0x0e;
+  return v;
+}
+
+static uint8_t get_byte_2(uint8_t v)
+{
+  uint8_t w;
+  w = v;
+  w &= 3;
+  w = (w<<2) | w;
+  v <<= 3;
+  v &= 0x0e0;
+  w |= v;
+  return w;
+}
+
+uint8_t u8g_dev_st7687_c144mvgd_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7687_c144mvgd_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        uint8_t y, i, j;
+        uint8_t *ptr;
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        
+        u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        y = pb->p.page_y0;
+        ptr = pb->buf;
+        
+        u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+        u8g_WriteByte(u8g, dev, 0x02a );      /* Column address set 8.1.20 */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        u8g_WriteByte(u8g, dev, 0x000 );      /* x0 */
+        u8g_WriteByte(u8g, dev, WIDTH-1 );      /* x1 */
+        u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+        u8g_WriteByte(u8g, dev, 0x02b );      /* Row address set 8.1.21 */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        u8g_WriteByte(u8g, dev, y );      /* y0 */
+        u8g_WriteByte(u8g, dev, y+PAGE_HEIGHT-1 );      /* y1 */
+        u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+        u8g_WriteByte(u8g, dev, 0x02c );      /* Memory write 8.1.22 */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        
+        for( i = 0; i < PAGE_HEIGHT; i ++ )
+        {
+          
+          for( j = 0; j < WIDTH; j ++ )
+          {
+            u8g_WriteByte(u8g, dev, get_byte_1(*ptr) );     
+            u8g_WriteByte(u8g, dev, get_byte_2(*ptr) );                 
+            ptr++;
+          }
+        }
+        u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+  }
+  return u8g_dev_pb8h8_base_fn(u8g, dev, msg, arg);
+}
+
+
+uint8_t u8g_st7687_c144mvgd_8h8_buf[WIDTH*8] U8G_NOCOMMON ; 
+u8g_pb_t u8g_st7687_c144mvgd_8h8_pb = { {8, HEIGHT, 0, 0, 0},  WIDTH, u8g_st7687_c144mvgd_8h8_buf}; 
+
+u8g_dev_t u8g_dev_st7687_c144mvgd_sw_spi = { u8g_dev_st7687_c144mvgd_fn, &u8g_st7687_c144mvgd_8h8_pb, u8g_com_arduino_sw_spi_fn };
+
+u8g_dev_t u8g_dev_st7687_c144mvgd_8bit = { u8g_dev_st7687_c144mvgd_fn, &u8g_st7687_c144mvgd_8h8_pb, U8G_COM_PARALLEL };

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_st7920_128x64.c

@@ -0,0 +1,171 @@
+/*
+
+  u8g_dev_st7565_128x64.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+
+/* init sequence from https://github.com/adafruit/ST7565-LCD/blob/master/ST7565/ST7565.cpp */
+static const uint8_t u8g_dev_st7920_128x64_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+  U8G_ESC_DLY(100),         /* 8 Dez 2012: additional delay 100 ms because of reset*/
+  U8G_ESC_CS(1),             /* enable chip */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+
+  0x038,                                /* 8 Bit interface (DL=1), basic instruction set (RE=0) */
+  0x00c,                                /* display on, cursor & blink off; 0x08: all off */
+  0x006,                                /* Entry mode: Cursor move to right ,DDRAM address counter (AC) plus 1, no shift */
+  0x002,                                /* disable scroll, enable CGRAM adress */
+  0x001,                                /* clear RAM, needs 1.6 ms */
+  U8G_ESC_DLY(100),               /* delay 100 ms */
+  
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7920_128x64_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        uint8_t y, i;
+        uint8_t *ptr;
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        
+        u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        y = pb->p.page_y0;
+        ptr = pb->buf;
+        for( i = 0; i < 8; i ++ )
+        {
+          u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x03e );      /* enable extended mode */
+
+          if ( y < 32 )
+          {
+                  u8g_WriteByte(u8g, dev, 0x080 | y );      /* y pos  */
+                  u8g_WriteByte(u8g, dev, 0x080  );      /* set x pos to 0*/
+          }
+          else
+          {
+                  u8g_WriteByte(u8g, dev, 0x080 | (y-32) );      /* y pos  */
+                  u8g_WriteByte(u8g, dev, 0x080 | 8);      /* set x pos to 64*/
+          }
+          
+          u8g_SetAddress(u8g, dev, 1);                  /* data mode */
+          u8g_WriteSequence(u8g, dev, WIDTH/8, ptr);
+          ptr += WIDTH/8;
+          y++;
+        }
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+  }
+  return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);
+}
+
+uint8_t u8g_dev_st7920_128x64_4x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7920_128x64_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        uint8_t y, i;
+        uint8_t *ptr;
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        
+        u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        y = pb->p.page_y0;
+        ptr = pb->buf;
+        for( i = 0; i < 32; i ++ )
+        {
+          u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x03e );      /* enable extended mode */
+
+          if ( y < 32 )
+          {
+                  u8g_WriteByte(u8g, dev, 0x080 | y );      /* y pos  */
+                  u8g_WriteByte(u8g, dev, 0x080  );      /* set x pos to 0*/
+          }
+          else
+          {
+                  u8g_WriteByte(u8g, dev, 0x080 | (y-32) );      /* y pos  */
+                  u8g_WriteByte(u8g, dev, 0x080 | 8);      /* set x pos to 64*/
+          }
+          
+          u8g_SetAddress(u8g, dev, 1);                  /* data mode */
+          u8g_WriteSequence(u8g, dev, WIDTH/8, ptr);
+          ptr += WIDTH/8;
+          y++;
+        }
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+  }
+  return u8g_dev_pb32h1_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_st7920_128x64_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7920_128x64_fn, U8G_COM_ST7920_SW_SPI);
+U8G_PB_DEV(u8g_dev_st7920_128x64_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7920_128x64_fn, U8G_COM_ST7920_HW_SPI);
+U8G_PB_DEV(u8g_dev_st7920_128x64_8bit, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7920_128x64_fn, U8G_COM_FAST_PARALLEL);
+
+#define QWIDTH (WIDTH*4)
+uint8_t u8g_dev_st7920_128x64_4x_buf[QWIDTH] U8G_NOCOMMON ; 
+u8g_pb_t u8g_dev_st7920_128x64_4x_pb = { {32, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_st7920_128x64_4x_buf}; 
+u8g_dev_t u8g_dev_st7920_128x64_4x_sw_spi = { u8g_dev_st7920_128x64_4x_fn, &u8g_dev_st7920_128x64_4x_pb, U8G_COM_ST7920_SW_SPI };
+u8g_dev_t u8g_dev_st7920_128x64_4x_hw_spi = { u8g_dev_st7920_128x64_4x_fn, &u8g_dev_st7920_128x64_4x_pb, U8G_COM_ST7920_HW_SPI };
+u8g_dev_t u8g_dev_st7920_128x64_4x_8bit = { u8g_dev_st7920_128x64_4x_fn, &u8g_dev_st7920_128x64_4x_pb, U8G_COM_FAST_PARALLEL };
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_st7920_192x32.c

@@ -0,0 +1,151 @@
+/*
+
+  u8g_dev_st7920_192x32.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 192
+#define HEIGHT 32
+
+
+/* init sequence from https://github.com/adafruit/ST7565-LCD/blob/master/ST7565/ST7565.cpp */
+static const uint8_t u8g_dev_st7920_192x32_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+  U8G_ESC_DLY(100),         /* 8 Dez 2012: additional delay 100 ms because of reset*/
+  U8G_ESC_CS(1),             /* enable chip */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+
+  0x038,                                /* 8 Bit interface (DL=1), basic instruction set (RE=0) */
+  0x00c,                                /* display on, cursor & blink off; 0x08: all off */
+  0x006,                                /* Entry mode: Cursor move to right ,DDRAM address counter (AC) plus 1, no shift */
+  0x002,                                /* disable scroll, enable CGRAM adress */
+  0x001,                                /* clear RAM, needs 1.6 ms */
+  U8G_ESC_DLY(100),               /* delay 10 ms */
+  
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_st7920_192x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7920_192x32_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        uint8_t y, i;
+        uint8_t *ptr;
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        
+        u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        y = pb->p.page_y0;
+        ptr = pb->buf;
+        for( i = 0; i < 8; i ++ )
+        {
+          u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x03e );      /* enable extended mode */
+          u8g_WriteByte(u8g, dev, 0x080 | y );      /* y pos  */
+          u8g_WriteByte(u8g, dev, 0x080  );      /* set x pos to 0*/          
+          u8g_SetAddress(u8g, dev, 1);                  /* data mode */
+          u8g_WriteSequence(u8g, dev, WIDTH/8, ptr);
+          ptr += WIDTH/8;
+          y++;
+        }
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+  }
+  return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);
+}
+
+uint8_t u8g_dev_st7920_192x32_4x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7920_192x32_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        uint8_t y, i;
+        uint8_t *ptr;
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        
+        u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        y = pb->p.page_y0;
+        ptr = pb->buf;
+        for( i = 0; i < 32; i ++ )
+        {
+          u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x03e );      /* enable extended mode */
+          u8g_WriteByte(u8g, dev, 0x080 | y );      /* y pos  */
+          u8g_WriteByte(u8g, dev, 0x080  );      /* set x pos to 0*/          
+          u8g_SetAddress(u8g, dev, 1);                  /* data mode */
+          u8g_WriteSequence(u8g, dev, WIDTH/8, ptr);
+          ptr += WIDTH/8;
+          y++;
+        }
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+  }
+  return u8g_dev_pb32h1_base_fn(u8g, dev, msg, arg);
+}
+
+
+U8G_PB_DEV(u8g_dev_st7920_192x32_sw_spi, WIDTH, HEIGHT, 8, u8g_dev_st7920_192x32_fn, U8G_COM_ST7920_SW_SPI);
+U8G_PB_DEV(u8g_dev_st7920_192x32_hw_spi, WIDTH, HEIGHT, 8, u8g_dev_st7920_192x32_fn, U8G_COM_ST7920_HW_SPI);
+U8G_PB_DEV(u8g_dev_st7920_192x32_8bit, WIDTH, HEIGHT, 8, u8g_dev_st7920_192x32_fn, U8G_COM_FAST_PARALLEL);
+
+
+#define QWIDTH (WIDTH*4)
+uint8_t u8g_dev_st7920_192x32_4x_buf[QWIDTH] U8G_NOCOMMON ; 
+u8g_pb_t u8g_dev_st7920_192x32_4x_pb = { {32, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_st7920_192x32_4x_buf}; 
+u8g_dev_t u8g_dev_st7920_192x32_4x_sw_spi = { u8g_dev_st7920_192x32_4x_fn, &u8g_dev_st7920_192x32_4x_pb, U8G_COM_ST7920_SW_SPI };
+u8g_dev_t u8g_dev_st7920_192x32_4x_hw_spi = { u8g_dev_st7920_192x32_4x_fn, &u8g_dev_st7920_192x32_4x_pb, U8G_COM_ST7920_HW_SPI };
+u8g_dev_t u8g_dev_st7920_192x32_4x_8bit = { u8g_dev_st7920_192x32_4x_fn, &u8g_dev_st7920_192x32_4x_pb, U8G_COM_FAST_PARALLEL };
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_st7920_202x32.c

@@ -0,0 +1,154 @@
+/*
+
+  u8g_dev_st7920_202x32.c
+  tested with CFAG20232
+  
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 202
+#define HEIGHT 32
+#define PAGE_HEIGHT 8
+
+
+/* init sequence from https://github.com/adafruit/ST7565-LCD/blob/master/ST7565/ST7565.cpp */
+static const uint8_t u8g_dev_st7920_202x32_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+  U8G_ESC_DLY(100),         /* 8 Dez 2012: additional delay 100 ms because of reset*/
+  U8G_ESC_CS(1),             /* enable chip */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+
+  0x038,                                /* 8 Bit interface (DL=1), basic instruction set (RE=0) */
+  0x00c,                                /* display on, cursor & blink off; 0x08: all off */
+  0x006,                                /* Entry mode: Cursor move to right ,DDRAM address counter (AC) plus 1, no shift */
+  0x002,                                /* disable scroll, enable CGRAM adress */
+  0x001,                                /* clear RAM, needs 1.6 ms */
+  U8G_ESC_DLY(100),               /* delay 10 ms */
+  
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_st7920_202x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7920_202x32_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        uint8_t y, i;
+        uint8_t *ptr;
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        
+        u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        y = pb->p.page_y0;
+        ptr = pb->buf;
+        for( i = 0; i < 8; i ++ )
+        {
+          u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x03e );      /* enable extended mode */
+          u8g_WriteByte(u8g, dev, 0x080 | y );      /* y pos  */
+          u8g_WriteByte(u8g, dev, 0x080  );      /* set x pos to 0*/          
+          u8g_SetAddress(u8g, dev, 1);                  /* data mode */
+          u8g_WriteSequence(u8g, dev, WIDTH/8, ptr);
+          ptr += WIDTH/8;
+          y++;
+        }
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+  }
+  return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);
+}
+
+uint8_t u8g_dev_st7920_202x32_4x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7920_202x32_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        uint8_t y, i;
+        uint8_t *ptr;
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        
+        u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        y = pb->p.page_y0;
+        ptr = pb->buf;
+        for( i = 0; i < 32; i ++ )
+        {
+          u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x03e );      /* enable extended mode */
+          u8g_WriteByte(u8g, dev, 0x080 | y );      /* y pos  */
+          u8g_WriteByte(u8g, dev, 0x080  );      /* set x pos to 0*/          
+          u8g_SetAddress(u8g, dev, 1);                  /* data mode */
+          u8g_WriteSequence(u8g, dev, WIDTH/8, ptr);
+          ptr += WIDTH/8;
+          y++;
+        }
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+  }
+  return u8g_dev_pb32h1_base_fn(u8g, dev, msg, arg);
+}
+
+
+U8G_PB_DEV(u8g_dev_st7920_202x32_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7920_202x32_fn, U8G_COM_ST7920_SW_SPI);
+U8G_PB_DEV(u8g_dev_st7920_202x32_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7920_202x32_fn, U8G_COM_ST7920_HW_SPI);
+U8G_PB_DEV(u8g_dev_st7920_202x32_8bit, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7920_202x32_fn, U8G_COM_FAST_PARALLEL);
+
+#define QWIDTH (WIDTH*4)
+uint8_t u8g_dev_st7920_202x32_4x_buf[QWIDTH] U8G_NOCOMMON ; 
+u8g_pb_t u8g_dev_st7920_202x32_4x_pb = { {32, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_st7920_202x32_4x_buf}; 
+u8g_dev_t u8g_dev_st7920_202x32_4x_sw_spi = { u8g_dev_st7920_202x32_4x_fn, &u8g_dev_st7920_202x32_4x_pb, U8G_COM_ST7920_SW_SPI };
+u8g_dev_t u8g_dev_st7920_202x32_4x_hw_spi = { u8g_dev_st7920_202x32_4x_fn, &u8g_dev_st7920_202x32_4x_pb, U8G_COM_ST7920_HW_SPI };
+u8g_dev_t u8g_dev_st7920_202x32_4x_8bit = { u8g_dev_st7920_202x32_4x_fn, &u8g_dev_st7920_202x32_4x_pb, U8G_COM_FAST_PARALLEL };
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_t6963_128x64.c

@@ -0,0 +1,191 @@
+/*
+
+  u8g_dev_t6963_128x64.c
+  
+  Tested with Varitronix MGLS240128TZ
+  
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2013, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+        
+  Application Notes for the MGLS 240x128
+    www.baso.no/content/pdf/T6963C_Application.pdf
+  
+  Hitachi App Notes:
+    https://www.sparkfun.com/datasheets/LCD/Monochrome/AN-029-Toshiba_T6963C.pdf
+
+  Notes:
+    The font selection pins should generate the 8x8 font.
+    For the MGLS240128TZ only FS1 is available on pin 18.
+    FS1 must be low to generate the 8x8 font.
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 16
+
+
+/* text is not used, so settings are not relevant */
+static const uint8_t u8g_dev_t6963_128x64_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* data mode */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+
+  U8G_ESC_CS(1),             /* enable chip */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x021,                                /* set cursor position */
+  
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x022,                                /* set offset */
+
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x040,				     /* text home */
+
+  U8G_ESC_ADR(0),               /* data mode */
+  WIDTH/8,                      	    /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x041,				     /* text columns */
+
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x042,				     /* graphics home */
+
+  U8G_ESC_ADR(0),               /* data mode */
+  WIDTH/8,                      /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x043,				     /* graphics columns */
+  
+  // mode set
+  // 0x080: Internal CG, OR Mode
+  // 0x081: Internal CG, EXOR Mode
+  // 0x083: Internal CG, AND Mode
+  // 0x088: External CG, OR Mode
+  // 0x089: External CG, EXOR Mode
+  // 0x08B: External CG, AND Mode
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x080,                                /* mode register: OR Mode, Internal Character Mode */
+  
+  U8G_ESC_ADR(1),               /* instruction mode */
+  // display mode
+  // 0x090: Display off
+  // 0x094: Graphic off, text on, cursor off, blink off
+  // 0x096: Graphic off, text on, cursor on, blink off
+  // 0x097: Graphic off, text on, cursor on, blink on
+  // 0x098: Graphic on, text off, cursor off, blink off
+  // 0x09a: Graphic on, text off, cursor on, blink off
+  // ...
+  // 0x09c: Graphic on, text on, cursor off, blink off
+  // 0x09f: Graphic on, text on, cursor on, blink on
+  0x098,                                /* mode register: Display Mode, Graphics on, Text off, Cursor off */
+  
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x024,                                /* set adr pointer */
+  
+
+  U8G_ESC_DLY(100),         /* delay 100 ms */
+  
+  U8G_ESC_ADR(0),               /* data mode */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_t6963_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);    
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_t6963_128x64_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        uint8_t y, i;
+        uint16_t disp_ram_adr;
+        uint8_t *ptr;
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+
+        
+	u8g_SetAddress(u8g, dev, 0);           /* data mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        y = pb->p.page_y0;
+        ptr = pb->buf;
+        disp_ram_adr = WIDTH/8;
+        disp_ram_adr *= y;
+        for( i = 0; i < PAGE_HEIGHT; i ++ )
+        {
+          u8g_SetAddress(u8g, dev, 0);           /* data mode */
+          u8g_WriteByte(u8g, dev, disp_ram_adr&255 );      /* address low byte */
+          u8g_WriteByte(u8g, dev, disp_ram_adr>>8 );      /* address hight byte */
+          u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x024 );      /* set adr ptr */
+	  
+          u8g_WriteSequence(u8g, dev, WIDTH/8, ptr);	
+	  
+          ptr += WIDTH/8;
+          disp_ram_adr += WIDTH/8;
+        }
+	u8g_SetAddress(u8g, dev, 0);           /* data mode */
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+  }
+  return u8g_dev_pb16h1_base_fn(u8g, dev, msg, arg);
+}
+
+// U8G_PB_DEV(u8g_dev_t6963_128x64_8bit, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_t6963_128x64_fn, U8G_COM_T6963);
+
+uint8_t u8g_dev_t6963_128x64_2x_bw_buf[WIDTH/8*PAGE_HEIGHT] U8G_NOCOMMON ; 
+u8g_pb_t u8g_dev_t6963_128x64_2x_bw_pb = { {PAGE_HEIGHT, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_t6963_128x64_2x_bw_buf}; 
+u8g_dev_t u8g_dev_t6963_128x64_8bit = { u8g_dev_t6963_128x64_fn, &u8g_dev_t6963_128x64_2x_bw_pb, U8G_COM_T6963 };
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_t6963_240x128.c

@@ -0,0 +1,195 @@
+/*
+
+  u8g_dev_t6963_240x128.c
+  
+  Tested with Varitronix MGLS240128TZ
+  
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2013, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+    
+        
+  Application Notes for the MGLS 240x128
+    www.baso.no/content/pdf/T6963C_Application.pdf
+  
+  Hitachi App Notes:
+    https://www.sparkfun.com/datasheets/LCD/Monochrome/AN-029-Toshiba_T6963C.pdf
+
+  Notes:
+    The font selection pins should generate the 8x8 font.
+    For the MGLS240128TZ only FS1 is available on pin 18.
+    FS1 must be low to generate the 8x8 font.
+  
+
+*/
+
+#include "u8g.h"
+
+#define WIDTH 240
+#define HEIGHT 128
+#define PAGE_HEIGHT 16
+
+
+/*
+  http://www.mark-products.com/graphics.htm#240x64%20Pixel%20Format
+*/
+
+/* text is not used, so settings are not relevant */
+static const uint8_t u8g_dev_t6963_240x128_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* data mode */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+
+  U8G_ESC_CS(1),             /* enable chip */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x021,                                /* set cursor position */
+  
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x022,                                /* set offset */
+
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x040,				     /* text home */
+
+  U8G_ESC_ADR(0),               /* data mode */
+  WIDTH/8,                      	    /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x041,				     /* text columns */
+
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x042,				     /* graphics home */
+
+  U8G_ESC_ADR(0),               /* data mode */
+  WIDTH/8,                            /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x043,				     /* graphics columns */
+  
+  // mode set
+  // 0x080: Internal CG, OR Mode
+  // 0x081: Internal CG, EXOR Mode
+  // 0x083: Internal CG, AND Mode
+  // 0x088: External CG, OR Mode
+  // 0x089: External CG, EXOR Mode
+  // 0x08B: External CG, AND Mode
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x080,                                /* mode register: OR Mode, Internal Character Mode */
+  
+  U8G_ESC_ADR(1),               /* instruction mode */
+  // display mode
+  // 0x090: Display off
+  // 0x094: Graphic off, text on, cursor off, blink off
+  // 0x096: Graphic off, text on, cursor on, blink off
+  // 0x097: Graphic off, text on, cursor on, blink on
+  // 0x098: Graphic on, text off, cursor off, blink off
+  // 0x09a: Graphic on, text off, cursor on, blink off
+  // ...
+  // 0x09c: Graphic on, text on, cursor off, blink off
+  // 0x09f: Graphic on, text on, cursor on, blink on
+  0x098,                                /* mode register: Display Mode, Graphics on, Text off, Cursor off */
+  
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x024,                                /* set adr pointer */
+  
+
+  U8G_ESC_DLY(100),         /* delay 100 ms */
+  
+  U8G_ESC_ADR(0),               /* data mode */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_t6963_240x128_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);    
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_t6963_240x128_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        uint8_t y, i;
+        uint16_t disp_ram_adr;
+        uint8_t *ptr;
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+
+        
+	u8g_SetAddress(u8g, dev, 0);           /* data mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        y = pb->p.page_y0;
+        ptr = pb->buf;
+        disp_ram_adr = WIDTH/8;
+        disp_ram_adr *= y;
+        for( i = 0; i < PAGE_HEIGHT; i ++ )
+        {
+          u8g_SetAddress(u8g, dev, 0);           /* data mode */
+          u8g_WriteByte(u8g, dev, disp_ram_adr&255 );      /* address low byte */
+          u8g_WriteByte(u8g, dev, disp_ram_adr>>8 );      /* address hight byte */
+          u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x024 );      /* set adr ptr */
+	  
+          u8g_WriteSequence(u8g, dev, WIDTH/8, ptr);	
+	  
+          ptr += WIDTH/8;
+          disp_ram_adr += WIDTH/8;
+        }
+	u8g_SetAddress(u8g, dev, 0);           /* data mode */
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+  }
+  return u8g_dev_pb16h1_base_fn(u8g, dev, msg, arg);
+}
+
+// U8G_PB_DEV(u8g_dev_t6963_240x128_8bit, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_t6963_240x128_fn, U8G_COM_T6963);
+
+uint8_t u8g_dev_t6963_240x128_2x_bw_buf[WIDTH/8*PAGE_HEIGHT] U8G_NOCOMMON ; 
+u8g_pb_t u8g_dev_t6963_240x128_2x_bw_pb = { {PAGE_HEIGHT, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_t6963_240x128_2x_bw_buf}; 
+u8g_dev_t u8g_dev_t6963_240x128_8bit = { u8g_dev_t6963_240x128_fn, &u8g_dev_t6963_240x128_2x_bw_pb, U8G_COM_T6963 };
+
+

ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/u8g_dev_t6963_240x64.c

@@ -0,0 +1,195 @@
+/*
+
+  u8g_dev_t6963_240x64.c
+  
+  Tested with Varitronix MGLS240128TZ
+  
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2013, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+        
+  Application Notes for the MGLS 240x128
+    www.baso.no/content/pdf/T6963C_Application.pdf
+  
+  Hitachi App Notes:
+    https://www.sparkfun.com/datasheets/LCD/Monochrome/AN-029-Toshiba_T6963C.pdf
+
+  Notes:
+    The font selection pins should generate the 8x8 font.
+    For the MGLS240128TZ only FS1 is available on pin 18.
+    FS1 must be low to generate the 8x8 font.
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 240
+#define HEIGHT 64
+#define PAGE_HEIGHT 16
+
+
+/*
+  http://www.mark-products.com/graphics.htm#240x64%20Pixel%20Format
+*/
+
+/* text is not used, so settings are not relevant */
+static const uint8_t u8g_dev_t6963_240x64_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* data mode */
+  U8G_ESC_RST(15),           /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+
+  U8G_ESC_CS(1),             /* enable chip */
+  U8G_ESC_DLY(50),         /* delay 50 ms */
+
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x021,                                /* set cursor position */
+  
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x022,                                /* set offset */
+
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x040,				     /* text home */
+
+  U8G_ESC_ADR(0),               /* data mode */
+  WIDTH/8,                      /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x041,				     /* text columns */
+
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x042,				     /* graphics home */
+
+  U8G_ESC_ADR(0),               /* data mode */
+  WIDTH/8,                      /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x043,				     /* graphics columns */
+  
+  // mode set
+  // 0x080: Internal CG, OR Mode
+  // 0x081: Internal CG, EXOR Mode
+  // 0x083: Internal CG, AND Mode
+  // 0x088: External CG, OR Mode
+  // 0x089: External CG, EXOR Mode
+  // 0x08B: External CG, AND Mode
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x080,                                /* mode register: OR Mode, Internal Character Mode */
+  
+  U8G_ESC_ADR(1),               /* instruction mode */
+  // display mode
+  // 0x090: Display off
+  // 0x094: Graphic off, text on, cursor off, blink off
+  // 0x096: Graphic off, text on, cursor on, blink off
+  // 0x097: Graphic off, text on, cursor on, blink on
+  // 0x098: Graphic on, text off, cursor off, blink off
+  // 0x09a: Graphic on, text off, cursor on, blink off
+  // ...
+  // 0x09c: Graphic on, text on, cursor off, blink off
+  // 0x09f: Graphic on, text on, cursor on, blink on
+  0x098,                                /* mode register: Display Mode, Graphics on, Text off, Cursor off */
+  
+  U8G_ESC_ADR(0),               /* data mode */
+  0x000,                                /* low byte */
+  0x000,                                /* height byte */
+  U8G_ESC_ADR(1),               /* instruction mode */
+  0x024,                                /* set adr pointer */
+  
+
+  U8G_ESC_DLY(100),         /* delay 100 ms */
+  
+  U8G_ESC_ADR(0),               /* data mode */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_t6963_240x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev);    
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_t6963_240x64_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        uint8_t y, i;
+        uint16_t disp_ram_adr;
+        uint8_t *ptr;
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+
+        
+	u8g_SetAddress(u8g, dev, 0);           /* data mode */
+        u8g_SetChipSelect(u8g, dev, 1);
+        y = pb->p.page_y0;
+        ptr = pb->buf;
+        disp_ram_adr = WIDTH/8;
+        disp_ram_adr *= y;
+        for( i = 0; i < PAGE_HEIGHT; i ++ )
+        {
+          u8g_SetAddress(u8g, dev, 0);           /* data mode */
+          u8g_WriteByte(u8g, dev, disp_ram_adr&255 );      /* address low byte */
+          u8g_WriteByte(u8g, dev, disp_ram_adr>>8 );      /* address hight byte */
+          u8g_SetAddress(u8g, dev, 1);           /* cmd mode */
+          u8g_WriteByte(u8g, dev, 0x024 );      /* set adr ptr */
+	  
+          u8g_WriteSequence(u8g, dev, WIDTH/8, ptr);	
+	  
+          ptr += WIDTH/8;
+          disp_ram_adr += WIDTH/8;
+        }
+	u8g_SetAddress(u8g, dev, 0);           /* data mode */
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+  }
+  return u8g_dev_pb16h1_base_fn(u8g, dev, msg, arg);
+}
+
+// U8G_PB_DEV(u8g_dev_t6963_240x64_8bit, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_t6963_240x64_fn, U8G_COM_T6963);
+
+uint8_t u8g_dev_t6963_240x64_2x_bw_buf[WIDTH/8*PAGE_HEIGHT] U8G_NOCOMMON ; 
+u8g_pb_t u8g_dev_t6963_240x64_2x_bw_pb = { {PAGE_HEIGHT, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_t6963_240x64_2x_bw_buf}; 
+u8g_dev_t u8g_dev_t6963_240x64_8bit = { u8g_dev_t6963_240x64_fn, &u8g_dev_t6963_240x64_2x_bw_pb, U8G_COM_T6963 };
+
+