Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 (#7480)

Marlin/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/Anet/A6/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/Anet/A8/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/Cartesio/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/Felix/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/Malyan/M150/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/RigidBot/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/SCARA/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/TinyBoy2/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/Velleman/K8200/Configuration_adv.h

@@ -674,15 +674,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/Velleman/K8400/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -663,15 +663,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -663,15 +663,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/delta/generic/Configuration_adv.h

@@ -663,15 +663,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@@ -663,15 +663,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

@@ -668,15 +668,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

@@ -663,15 +663,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/makibox/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.

Marlin/example_configurations/wt150/Configuration_adv.h

@@ -661,15 +661,15 @@
 // Below are the macros that are used to define the borders for the mesh area,
 // made available here for specialized needs, ie dual extruder setup.
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
 
   // If this is defined, the currently active mesh will be saved in the
   // current slot on M500.