Create DEBUG_LEVELING_FEATURE

9 years ago · 20b4772155
parent 194f98ff95
commit 20b4772155
4 changed files with 391 additions and 256 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -510,8 +510,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
  //#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
  //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+
+  //If you have enabled the Bed Auto Leveling and are using the same Z Probe for Z Homing,
+  //it is highly recommended you let this Z_SAFE_HOMING enabled!!!

  #define Z_SAFE_HOMING   // This feature is meant to avoid Z homing with Z probe outside the bed area.
                          // When defined, it will:
--- a/Marlin/Marlin.h
+++ b/Marlin/Marlin.h
@ -221,7 +221,8 @@ enum DebugFlags {
  DEBUG_INFO          = BIT(1),
  DEBUG_ERRORS        = BIT(2),
  DEBUG_DRYRUN        = BIT(3),
-  DEBUG_COMMUNICATION = BIT(4)
+  DEBUG_COMMUNICATION = BIT(4),
+  DEBUG_LEVELING      = BIT(5)
 };
 extern uint8_t marlin_debug_flags;

--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@ -1033,7 +1033,7 @@ XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR);

 #endif //DUAL_X_CARRIAGE

-#ifdef DEBUG_LEVELING
+#if ENABLED(DEBUG_LEVELING_FEATURE)
  void print_xyz(const char *prefix, const float x, const float y, const float z) {
    SERIAL_ECHO(prefix);
    SERIAL_ECHOPAIR(": (", x);
@ -1112,10 +1112,12 @@ static void set_axis_is_at_home(AxisEnum axis) {
      if (axis == Z_AXIS) current_position[Z_AXIS] -= zprobe_zoffset;
    #endif

-    #ifdef DEBUG_LEVELING
-      SERIAL_ECHOPAIR("set_axis_is_at_home ", (unsigned long)axis);
-      SERIAL_ECHOPAIR(" > (home_offset[axis]==", home_offset[axis]);
-      print_xyz(") > current_position", current_position);
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        SERIAL_ECHOPAIR("set_axis_is_at_home ", (unsigned long)axis);
+        SERIAL_ECHOPAIR(" > (home_offset[axis]==", home_offset[axis]);
+        print_xyz(") > current_position", current_position);
+      }
    #endif
  }
 }
@ -1162,8 +1164,10 @@ static void setup_for_endstop_move() {
  saved_feedrate_multiplier = feedrate_multiplier;
  feedrate_multiplier = 100;
  refresh_cmd_timeout();
-  #ifdef DEBUG_LEVELING
-    SERIAL_ECHOLNPGM("setup_for_endstop_move > enable_endstops(true)");
+  #if ENABLED(DEBUG_LEVELING_FEATURE)
+    if (marlin_debug_flags & DEBUG_LEVELING) {
+      SERIAL_ECHOLNPGM("setup_for_endstop_move > enable_endstops(true)");
+    }
  #endif
  enable_endstops(true);
 }
@ -1175,8 +1179,10 @@ static void setup_for_endstop_move() {
     * Calculate delta, start a line, and set current_position to destination
     */
    void prepare_move_raw() {
-      #ifdef DEBUG_LEVELING
-        print_xyz("prepare_move_raw > destination", destination);
+      #if ENABLED(DEBUG_LEVELING_FEATURE)
+        if (marlin_debug_flags & DEBUG_LEVELING) {
+          print_xyz("prepare_move_raw > destination", destination);
+        }
      #endif
      refresh_cmd_timeout();
      calculate_delta(destination);
@ -1205,8 +1211,10 @@ static void setup_for_endstop_move() {
        current_position[Y_AXIS] = corrected_position.y;
        current_position[Z_AXIS] = corrected_position.z;

-        #ifdef DEBUG_LEVELING
-          print_xyz("set_bed_level_equation_lsq > current_position", current_position);
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            print_xyz("set_bed_level_equation_lsq > current_position", current_position);
+          }
        #endif

        sync_plan_position();
@ -1238,8 +1246,10 @@ static void setup_for_endstop_move() {
      current_position[Y_AXIS] = corrected_position.y;
      current_position[Z_AXIS] = corrected_position.z;

-      #ifdef DEBUG_LEVELING
-        print_xyz("set_bed_level_equation_3pts > current_position", current_position);
+      #if ENABLED(DEBUG_LEVELING_FEATURE)
+        if (marlin_debug_flags & DEBUG_LEVELING) {
+          print_xyz("set_bed_level_equation_3pts > current_position", current_position);
+        }
      #endif

      sync_plan_position();
@ -1254,8 +1264,10 @@ static void setup_for_endstop_move() {
      float start_z = current_position[Z_AXIS];
      long start_steps = st_get_position(Z_AXIS);

-      #ifdef DEBUG_LEVELING
+      #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
        SERIAL_ECHOLNPGM("run_z_probe (DELTA) 1");
+      }
      #endif

      // move down slowly until you find the bed
@ -1270,8 +1282,10 @@ static void setup_for_endstop_move() {
      float mm = start_z - float(start_steps - stop_steps) / axis_steps_per_unit[Z_AXIS];
      current_position[Z_AXIS] = mm;

-      #ifdef DEBUG_LEVELING
-        print_xyz("run_z_probe (DELTA) 2 > current_position", current_position);
+      #if ENABLED(DEBUG_LEVELING_FEATURE)
+        if (marlin_debug_flags & DEBUG_LEVELING) {
+          print_xyz("run_z_probe (DELTA) 2 > current_position", current_position);
+        }
      #endif

      sync_plan_position_delta();
@ -1308,8 +1322,10 @@ static void setup_for_endstop_move() {
      current_position[Z_AXIS] = st_get_position_mm(Z_AXIS);
      sync_plan_position();

-      #ifdef DEBUG_LEVELING
-        print_xyz("run_z_probe > current_position", current_position);
+      #if ENABLED(DEBUG_LEVELING_FEATURE)
+        if (marlin_debug_flags & DEBUG_LEVELING) {
+          print_xyz("run_z_probe > current_position", current_position);
+        }
      #endif

    #endif // !DELTA
@ -1322,8 +1338,10 @@ static void setup_for_endstop_move() {
  static void do_blocking_move_to(float x, float y, float z) {
    float oldFeedRate = feedrate;

-    #ifdef DEBUG_LEVELING
-      print_xyz("do_blocking_move_to", x, y, z);
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        print_xyz("do_blocking_move_to", x, y, z);
+      }
    #endif

    #if ENABLED(DELTA)
@ -1362,8 +1380,10 @@ static void setup_for_endstop_move() {

  static void clean_up_after_endstop_move() {
    #if ENABLED(ENDSTOPS_ONLY_FOR_HOMING)
-      #if ENABLED(DEBUG_LEVELING)
-        SERIAL_ECHOLNPGM("clean_up_after_endstop_move > ENDSTOPS_ONLY_FOR_HOMING > enable_endstops(false)");
+      #if ENABLED(DEBUG_LEVELING_FEATURE)
+        if (marlin_debug_flags & DEBUG_LEVELING) {
+          SERIAL_ECHOLNPGM("clean_up_after_endstop_move > ENDSTOPS_ONLY_FOR_HOMING > enable_endstops(false)");
+        }
      #endif
      enable_endstops(false);
    #endif
@ -1374,8 +1394,10 @@ static void setup_for_endstop_move() {

  static void deploy_z_probe() {

-    #ifdef DEBUG_LEVELING
-      print_xyz("deploy_z_probe > current_position", current_position);
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        print_xyz("deploy_z_probe > current_position", current_position);
+      }
    #endif

    #if HAS_SERVO_ENDSTOPS
@ -1468,8 +1490,10 @@ static void setup_for_endstop_move() {

  static void stow_z_probe(bool doRaise=true) {

-    #ifdef DEBUG_LEVELING
-      print_xyz("stow_z_probe > current_position", current_position);
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        print_xyz("stow_z_probe > current_position", current_position);
+      }
    #endif

    #if HAS_SERVO_ENDSTOPS
@ -1479,11 +1503,13 @@ static void setup_for_endstop_move() {

        #if Z_RAISE_AFTER_PROBING > 0
          if (doRaise) {
-            #ifdef DEBUG_LEVELING
-              SERIAL_ECHOPAIR("Raise Z (after) by ", (float)Z_RAISE_AFTER_PROBING);
-              SERIAL_EOL;
-              SERIAL_ECHOPAIR("> SERVO_ENDSTOPS > do_blocking_move_to_z ", current_position[Z_AXIS] + Z_RAISE_AFTER_PROBING);
-              SERIAL_EOL;
+            #if ENABLED(DEBUG_LEVELING_FEATURE)
+              if (marlin_debug_flags & DEBUG_LEVELING) {
+                SERIAL_ECHOPAIR("Raise Z (after) by ", (float)Z_RAISE_AFTER_PROBING);
+                SERIAL_EOL;
+                SERIAL_ECHOPAIR("> SERVO_ENDSTOPS > do_blocking_move_to_z ", current_position[Z_AXIS] + Z_RAISE_AFTER_PROBING);
+                SERIAL_EOL;
+              }
            #endif
            do_blocking_move_to_z(current_position[Z_AXIS] + Z_RAISE_AFTER_PROBING); // this also updates current_position
            st_synchronize();
@ -1574,35 +1600,43 @@ static void setup_for_endstop_move() {
  // Probe bed height at position (x,y), returns the measured z value
  static float probe_pt(float x, float y, float z_before, ProbeAction probe_action=ProbeDeployAndStow, int verbose_level=1) {

-    #ifdef DEBUG_LEVELING
-      SERIAL_ECHOLNPGM("probe_pt >>>");
-      SERIAL_ECHOPAIR("> ProbeAction:", (unsigned long)probe_action);
-      SERIAL_EOL;
-      print_xyz("> current_position", current_position);
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        SERIAL_ECHOLNPGM("probe_pt >>>");
+        SERIAL_ECHOPAIR("> ProbeAction:", (unsigned long)probe_action);
+        SERIAL_EOL;
+        print_xyz("> current_position", current_position);
+      }
    #endif

-    #ifdef DEBUG_LEVELING
-      SERIAL_ECHOPAIR("Z Raise to z_before ", z_before);
-      SERIAL_EOL;
-      SERIAL_ECHOPAIR("> do_blocking_move_to_z ", z_before);
-      SERIAL_EOL;
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        SERIAL_ECHOPAIR("Z Raise to z_before ", z_before);
+        SERIAL_EOL;
+        SERIAL_ECHOPAIR("> do_blocking_move_to_z ", z_before);
+        SERIAL_EOL;
+      }
    #endif

    // Move Z up to the z_before height, then move the Z probe to the given XY
    do_blocking_move_to_z(z_before); // this also updates current_position

-    #ifdef DEBUG_LEVELING
-      SERIAL_ECHOPAIR("> do_blocking_move_to_xy ", x - X_PROBE_OFFSET_FROM_EXTRUDER);
-      SERIAL_ECHOPAIR(", ", y - Y_PROBE_OFFSET_FROM_EXTRUDER);
-      SERIAL_EOL;
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        SERIAL_ECHOPAIR("> do_blocking_move_to_xy ", x - X_PROBE_OFFSET_FROM_EXTRUDER);
+        SERIAL_ECHOPAIR(", ", y - Y_PROBE_OFFSET_FROM_EXTRUDER);
+        SERIAL_EOL;
+      }
    #endif

    do_blocking_move_to_xy(x - X_PROBE_OFFSET_FROM_EXTRUDER, y - Y_PROBE_OFFSET_FROM_EXTRUDER); // this also updates current_position

    #if DISABLED(Z_PROBE_SLED) && DISABLED(Z_PROBE_ALLEN_KEY)
      if (probe_action & ProbeDeploy) {
-        #ifdef DEBUG_LEVELING
-          SERIAL_ECHOLNPGM("> ProbeDeploy");
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            SERIAL_ECHOLNPGM("> ProbeDeploy");
+          }
        #endif
        deploy_z_probe();
      }
@ -1613,8 +1647,10 @@ static void setup_for_endstop_move() {

    #if DISABLED(Z_PROBE_SLED) && DISABLED(Z_PROBE_ALLEN_KEY)
      if (probe_action & ProbeStow) {
-        #ifdef DEBUG_LEVELING
-          SERIAL_ECHOLNPGM("> ProbeStow (stow_z_probe will do Z Raise)");
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            SERIAL_ECHOLNPGM("> ProbeStow (stow_z_probe will do Z Raise)");
+          }
        #endif
        stow_z_probe();
      }
@ -1630,8 +1666,10 @@ static void setup_for_endstop_move() {
      SERIAL_EOL;
    }

-    #ifdef DEBUG_LEVELING
-      SERIAL_ECHOLNPGM("<<< probe_pt");
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        SERIAL_ECHOLNPGM("<<< probe_pt");
+      }
    #endif

    return measured_z;
@ -1689,8 +1727,10 @@ static void setup_for_endstop_move() {

    // Reset calibration results to zero.
    void reset_bed_level() {
-      #ifdef DEBUG_LEVELING
-        SERIAL_ECHOLNPGM("reset_bed_level");
+      #if ENABLED(DEBUG_LEVELING_FEATURE)
+        if (marlin_debug_flags & DEBUG_LEVELING) {
+          SERIAL_ECHOLNPGM("reset_bed_level");
+        }
      #endif
      for (int y = 0; y < AUTO_BED_LEVELING_GRID_POINTS; y++) {
        for (int x = 0; x < AUTO_BED_LEVELING_GRID_POINTS; x++) {
@ -1727,9 +1767,11 @@ static void setup_for_endstop_move() {
   * offset[in]   The additional distance to move to adjust docking location
   */
  static void dock_sled(bool dock, int offset=0) {
-    #ifdef DEBUG_LEVELING
-      SERIAL_ECHOPAIR("dock_sled", dock);
-      SERIAL_EOL;
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        SERIAL_ECHOPAIR("dock_sled", dock);
+        SERIAL_EOL;
+      }
    #endif
    if (!axis_known_position[X_AXIS] || !axis_known_position[Y_AXIS]) {
      LCD_MESSAGEPGM(MSG_POSITION_UNKNOWN);
@ -1765,10 +1807,12 @@ static void setup_for_endstop_move() {
 #define HOMEAXIS(LETTER) homeaxis(LETTER##_AXIS)

 static void homeaxis(AxisEnum axis) {
-  #ifdef DEBUG_LEVELING
-    SERIAL_ECHOPAIR(">>> homeaxis(", (unsigned long)axis);
-    SERIAL_CHAR(')');
-    SERIAL_EOL;
+  #if ENABLED(DEBUG_LEVELING_FEATURE)
+    if (marlin_debug_flags & DEBUG_LEVELING) {
+      SERIAL_ECHOPAIR(">>> homeaxis(", (unsigned long)axis);
+      SERIAL_CHAR(')');
+      SERIAL_EOL;
+    }
  #endif
  #define HOMEAXIS_DO(LETTER) \
    ((LETTER##_MIN_PIN > -1 && LETTER##_HOME_DIR==-1) || (LETTER##_MAX_PIN > -1 && LETTER##_HOME_DIR==1))
@ -1822,8 +1866,10 @@ static void homeaxis(AxisEnum axis) {
    current_position[axis] = 0;
    sync_plan_position();

-    #ifdef DEBUG_LEVELING
-      SERIAL_ECHOLNPGM("> enable_endstops(false)");
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        SERIAL_ECHOLNPGM("> enable_endstops(false)");
+      }
    #endif
    enable_endstops(false); // Disable endstops while moving away

@ -1832,8 +1878,10 @@ static void homeaxis(AxisEnum axis) {
    line_to_destination();
    st_synchronize();

-    #ifdef DEBUG_LEVELING
-      SERIAL_ECHOLNPGM("> enable_endstops(true)");
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        SERIAL_ECHOLNPGM("> enable_endstops(true)");
+      }
    #endif
    enable_endstops(true); // Enable endstops for next homing move

@ -1845,8 +1893,10 @@ static void homeaxis(AxisEnum axis) {
    line_to_destination();
    st_synchronize();

-    #ifdef DEBUG_LEVELING
-      print_xyz("> TRIGGER ENDSTOP > current_position", current_position);
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        print_xyz("> TRIGGER ENDSTOP > current_position", current_position);
+      }
    #endif

    #if ENABLED(Z_DUAL_ENDSTOPS)
@ -1877,27 +1927,35 @@ static void homeaxis(AxisEnum axis) {
    #if ENABLED(DELTA)
      // retrace by the amount specified in endstop_adj
      if (endstop_adj[axis] * axis_home_dir < 0) {
-        #ifdef DEBUG_LEVELING
-          SERIAL_ECHOLNPGM("> enable_endstops(false)");
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            SERIAL_ECHOLNPGM("> enable_endstops(false)");
+          }
        #endif
        enable_endstops(false); // Disable endstops while moving away
        sync_plan_position();
        destination[axis] = endstop_adj[axis];
-        #ifdef DEBUG_LEVELING
-          SERIAL_ECHOPAIR("> endstop_adj = ", endstop_adj[axis]);
-          print_xyz(" > destination", destination);
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            SERIAL_ECHOPAIR("> endstop_adj = ", endstop_adj[axis]);
+            print_xyz(" > destination", destination);
+          }
        #endif
        line_to_destination();
        st_synchronize();
-        #ifdef DEBUG_LEVELING
-          SERIAL_ECHOLNPGM("> enable_endstops(true)");
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            SERIAL_ECHOLNPGM("> enable_endstops(true)");
+          }
        #endif
        enable_endstops(true); // Enable endstops for next homing move
      }
-      #ifdef DEBUG_LEVELING
+      #if ENABLED(DEBUG_LEVELING_FEATURE)
        else {
-          SERIAL_ECHOPAIR("> endstop_adj * axis_home_dir = ", endstop_adj[axis] * axis_home_dir);
-          SERIAL_EOL;
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            SERIAL_ECHOPAIR("> endstop_adj * axis_home_dir = ", endstop_adj[axis] * axis_home_dir);
+            SERIAL_EOL;
+          }
        }
      #endif
    #endif
@ -1906,8 +1964,10 @@ static void homeaxis(AxisEnum axis) {
    set_axis_is_at_home(axis);
    sync_plan_position();

-    #ifdef DEBUG_LEVELING
-      print_xyz("> AFTER set_axis_is_at_home > current_position", current_position);
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        print_xyz("> AFTER set_axis_is_at_home > current_position", current_position);
+      }
    #endif

    destination[axis] = current_position[axis];
@ -1927,8 +1987,10 @@ static void homeaxis(AxisEnum axis) {
      // Deploy a Z probe if there is one, and homing towards the bed
      if (axis == Z_AXIS) {
        if (axis_home_dir < 0) {
-          #ifdef DEBUG_LEVELING
-            SERIAL_ECHOLNPGM("> SERVO_LEVELING > stow_z_probe");
+          #if ENABLED(DEBUG_LEVELING_FEATURE)
+            if (marlin_debug_flags & DEBUG_LEVELING) {
+              SERIAL_ECHOLNPGM("> SERVO_LEVELING > stow_z_probe");
+            }
          #endif
          stow_z_probe();
        }
@ -1941,8 +2003,10 @@ static void homeaxis(AxisEnum axis) {
      #if HAS_SERVO_ENDSTOPS
        // Retract Servo endstop if enabled
        if (servo_endstop_id[axis] >= 0) {
-          #ifdef DEBUG_LEVELING
-            SERIAL_ECHOLNPGM("> SERVO_ENDSTOPS > Stow with servo.move()");
+          #if ENABLED(DEBUG_LEVELING_FEATURE)
+            if (marlin_debug_flags & DEBUG_LEVELING) {
+              SERIAL_ECHOLNPGM("> SERVO_ENDSTOPS > Stow with servo.move()");
+            }
          #endif
          servo[servo_endstop_id[axis]].move(servo_endstop_angle[axis][1]);
        }
@ -1951,10 +2015,12 @@ static void homeaxis(AxisEnum axis) {

  }

-  #ifdef DEBUG_LEVELING
-    SERIAL_ECHOPAIR("<<< homeaxis(", (unsigned long)axis);
-    SERIAL_CHAR(')');
-    SERIAL_EOL;
+  #if ENABLED(DEBUG_LEVELING_FEATURE)
+    if (marlin_debug_flags & DEBUG_LEVELING) {
+      SERIAL_ECHOPAIR("<<< homeaxis(", (unsigned long)axis);
+      SERIAL_CHAR(')');
+      SERIAL_EOL;
+    }
  #endif
 }

@ -2157,8 +2223,10 @@ inline void gcode_G4() {
 */
 inline void gcode_G28() {

-  #ifdef DEBUG_LEVELING
-    SERIAL_ECHOLNPGM("gcode_G28 >>>");
+  #if ENABLED(DEBUG_LEVELING_FEATURE)
+    if (marlin_debug_flags & DEBUG_LEVELING) {
+      SERIAL_ECHOLNPGM("gcode_G28 >>>");
+    }
  #endif

  // Wait for planner moves to finish!
@ -2209,8 +2277,10 @@ inline void gcode_G28() {

    sync_plan_position_delta();

-    #ifdef DEBUG_LEVELING
-      print_xyz("(DELTA) > current_position", current_position);
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        print_xyz("(DELTA) > current_position", current_position);
+      }
    #endif

  #else // NOT DELTA
@ -2226,8 +2296,10 @@ inline void gcode_G28() {
      #if Z_HOME_DIR > 0  // If homing away from BED do Z first

        HOMEAXIS(Z);
-        #ifdef DEBUG_LEVELING
-          print_xyz("> HOMEAXIS(Z) > current_position", current_position);
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            print_xyz("> HOMEAXIS(Z) > current_position", current_position);
+          }
        #endif

      #elif DISABLED(Z_SAFE_HOMING) && defined(Z_RAISE_BEFORE_HOMING) && Z_RAISE_BEFORE_HOMING > 0
@ -2235,10 +2307,12 @@ inline void gcode_G28() {
        // Raise Z before homing any other axes
        // (Does this need to be "negative home direction?" Why not just use Z_RAISE_BEFORE_HOMING?)
        destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS);
-        #ifdef DEBUG_LEVELING
-          SERIAL_ECHOPAIR("Raise Z (before homing) by ", (float)Z_RAISE_BEFORE_HOMING);
-          SERIAL_EOL;
-          print_xyz("> (home_all_axis || homeZ) > destination", destination);
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            SERIAL_ECHOPAIR("Raise Z (before homing) by ", (float)Z_RAISE_BEFORE_HOMING);
+            SERIAL_EOL;
+            print_xyz("> (home_all_axis || homeZ) > destination", destination);
+          }
        #endif
        feedrate = max_feedrate[Z_AXIS] * 60;
        line_to_destination();
@ -2276,8 +2350,10 @@ inline void gcode_G28() {
        set_axis_is_at_home(Y_AXIS);
        sync_plan_position();

-        #ifdef DEBUG_LEVELING
-          print_xyz("> QUICK_HOME > current_position 1", current_position);
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            print_xyz("> QUICK_HOME > current_position 1", current_position);
+          }
        #endif

        destination[X_AXIS] = current_position[X_AXIS];
@ -2293,8 +2369,10 @@ inline void gcode_G28() {
          current_position[Z_AXIS] = destination[Z_AXIS];
        #endif

-        #ifdef DEBUG_LEVELING
-          print_xyz("> QUICK_HOME > current_position 2", current_position);
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            print_xyz("> QUICK_HOME > current_position 2", current_position);
+          }
        #endif
      }

@ -2322,8 +2400,10 @@ inline void gcode_G28() {
      #else
        HOMEAXIS(X);
      #endif
-      #ifdef DEBUG_LEVELING
-        print_xyz("> homeX", current_position);
+      #if ENABLED(DEBUG_LEVELING_FEATURE)
+        if (marlin_debug_flags & DEBUG_LEVELING) {
+          print_xyz("> homeX", current_position);
+        }
      #endif
    }

@ -2331,8 +2411,10 @@ inline void gcode_G28() {
      // Home Y
      if (home_all_axis || homeY) {
        HOMEAXIS(Y);
-        #ifdef DEBUG_LEVELING
-          print_xyz("> homeY", current_position);
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            print_xyz("> homeY", current_position);
+          }
        #endif
      }
    #endif
@ -2344,8 +2426,10 @@ inline void gcode_G28() {

        #if ENABLED(Z_SAFE_HOMING)

-          #ifdef DEBUG_LEVELING
-            SERIAL_ECHOLNPGM("> Z_SAFE_HOMING >>>");
+          #if ENABLED(DEBUG_LEVELING_FEATURE)
+            if (marlin_debug_flags & DEBUG_LEVELING) {
+              SERIAL_ECHOLNPGM("> Z_SAFE_HOMING >>>");
+            }
          #endif

          if (home_all_axis) {
@ -2363,11 +2447,13 @@ inline void gcode_G28() {
            destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS);    // Set destination away from bed
            feedrate = XY_TRAVEL_SPEED;

-            #ifdef DEBUG_LEVELING
-              SERIAL_ECHOPAIR("Raise Z (before homing) by ", (float)Z_RAISE_BEFORE_HOMING);
-              SERIAL_EOL;
-              print_xyz("> home_all_axis > current_position", current_position);
-              print_xyz("> home_all_axis > destination", destination);
+            #if ENABLED(DEBUG_LEVELING_FEATURE)
+              if (marlin_debug_flags & DEBUG_LEVELING) {
+                SERIAL_ECHOPAIR("Raise Z (before homing) by ", (float)Z_RAISE_BEFORE_HOMING);
+                SERIAL_EOL;
+                print_xyz("> home_all_axis > current_position", current_position);
+                print_xyz("> home_all_axis > destination", destination);
+              }
            #endif

            // This could potentially move X, Y, Z all together
@ -2403,11 +2489,13 @@ inline void gcode_G28() {
                destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS);
                feedrate = max_feedrate[Z_AXIS] * 60;  // feedrate (mm/m) = max_feedrate (mm/s)

-                #ifdef DEBUG_LEVELING
-                  SERIAL_ECHOPAIR("Raise Z (before homing) by ", (float)Z_RAISE_BEFORE_HOMING);
-                  SERIAL_EOL;
-                  print_xyz("> homeZ > current_position", current_position);
-                  print_xyz("> homeZ > destination", destination);
+                #if ENABLED(DEBUG_LEVELING_FEATURE)
+                  if (marlin_debug_flags & DEBUG_LEVELING) {
+                    SERIAL_ECHOPAIR("Raise Z (before homing) by ", (float)Z_RAISE_BEFORE_HOMING);
+                    SERIAL_EOL;
+                    print_xyz("> homeZ > current_position", current_position);
+                    print_xyz("> homeZ > destination", destination);
+                  }
                #endif

                line_to_destination();
@ -2430,8 +2518,10 @@ inline void gcode_G28() {

          } // !home_all_axes && homeZ

-          #ifdef DEBUG_LEVELING
-            SERIAL_ECHOLNPGM("<<< Z_SAFE_HOMING");
+          #if ENABLED(DEBUG_LEVELING_FEATURE)
+            if (marlin_debug_flags & DEBUG_LEVELING) {
+              SERIAL_ECHOLNPGM("<<< Z_SAFE_HOMING");
+            }
          #endif

        #else // !Z_SAFE_HOMING
@ -2440,8 +2530,10 @@ inline void gcode_G28() {

        #endif // !Z_SAFE_HOMING

-        #ifdef DEBUG_LEVELING
-          print_xyz("> (home_all_axis || homeZ) > final", current_position);
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            print_xyz("> (home_all_axis || homeZ) > final", current_position);
+          }
        #endif

      } // home_all_axis || homeZ
@ -2457,8 +2549,10 @@ inline void gcode_G28() {
  #endif

  #if ENABLED(ENDSTOPS_ONLY_FOR_HOMING)
-    #ifdef DEBUG_LEVELING
-      SERIAL_ECHOLNPGM("ENDSTOPS_ONLY_FOR_HOMING enable_endstops(false)");
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        SERIAL_ECHOLNPGM("ENDSTOPS_ONLY_FOR_HOMING enable_endstops(false)");
+      }
    #endif
    enable_endstops(false);
  #endif
@ -2475,8 +2569,10 @@ inline void gcode_G28() {
      current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
      sync_plan_position();
      mbl.active = 1;
-      #ifdef DEBUG_LEVELING
-        print_xyz("mbl_was_active > current_position", current_position);
+      #if ENABLED(DEBUG_LEVELING_FEATURE)
+        if (marlin_debug_flags & DEBUG_LEVELING) {
+          print_xyz("mbl_was_active > current_position", current_position);
+        }
      #endif
    }
  #endif
@ -2486,8 +2582,10 @@ inline void gcode_G28() {
  refresh_cmd_timeout();
  endstops_hit_on_purpose(); // clear endstop hit flags

-  #ifdef DEBUG_LEVELING
-    SERIAL_ECHOLNPGM("<<< gcode_G28");
+  #if ENABLED(DEBUG_LEVELING_FEATURE)
+    if (marlin_debug_flags & DEBUG_LEVELING) {
+      SERIAL_ECHOLNPGM("<<< gcode_G28");
+    }
  #endif

 }
@ -2675,8 +2773,10 @@ inline void gcode_G28() {
   */
  inline void gcode_G29() {

-    #ifdef DEBUG_LEVELING
-      SERIAL_ECHOLNPGM("gcode_G29 >>>");
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        SERIAL_ECHOLNPGM("gcode_G29 >>>");
+      }
    #endif

    // Don't allow auto-leveling without homing first
@ -2838,15 +2938,19 @@ inline void gcode_G28() {
                z_before = probePointCounter ? Z_RAISE_BETWEEN_PROBINGS + current_position[Z_AXIS] : Z_RAISE_BEFORE_PROBING;

          if (probePointCounter) {
-            #ifdef DEBUG_LEVELING
-              SERIAL_ECHOPAIR("z_before = (between) ", (float)(Z_RAISE_BETWEEN_PROBINGS + current_position[Z_AXIS]));
-              SERIAL_EOL;
+            #if ENABLED(DEBUG_LEVELING_FEATURE)
+              if (marlin_debug_flags & DEBUG_LEVELING) {
+                SERIAL_ECHOPAIR("z_before = (between) ", (float)(Z_RAISE_BETWEEN_PROBINGS + current_position[Z_AXIS]));
+                SERIAL_EOL;
+              }
            #endif
          }
          else {
-            #ifdef DEBUG_LEVELING
-              SERIAL_ECHOPAIR("z_before = (before) ", (float)Z_RAISE_BEFORE_PROBING);
-              SERIAL_EOL;
+            #if ENABLED(DEBUG_LEVELING_FEATURE)
+              if (marlin_debug_flags & DEBUG_LEVELING) {
+                SERIAL_ECHOPAIR("z_before = (before) ", (float)Z_RAISE_BEFORE_PROBING);
+                SERIAL_EOL;
+              }
            #endif
          }

@ -2887,8 +2991,10 @@ inline void gcode_G28() {
        } //xProbe
      } //yProbe

-      #ifdef DEBUG_LEVELING
-        print_xyz("> probing complete > current_position", current_position);
+      #if ENABLED(DEBUG_LEVELING_FEATURE)
+        if (marlin_debug_flags & DEBUG_LEVELING) {
+          print_xyz("> probing complete > current_position", current_position);
+        }
      #endif

      clean_up_after_endstop_move();
@ -2987,8 +3093,10 @@ inline void gcode_G28() {

    #else // !AUTO_BED_LEVELING_GRID

-      #ifdef DEBUG_LEVELING
-        SERIAL_ECHOLNPGM("> 3-point Leveling");
+      #if ENABLED(DEBUG_LEVELING_FEATURE)
+        if (marlin_debug_flags & DEBUG_LEVELING) {
+          SERIAL_ECHOLNPGM("> 3-point Leveling");
+        }
      #endif

      // Actions for each probe
@ -3020,11 +3128,13 @@ inline void gcode_G28() {
              z_tmp = current_position[Z_AXIS],
              real_z = st_get_position_mm(Z_AXIS);  //get the real Z (since plan_get_position is now correcting the plane)

-        #ifdef DEBUG_LEVELING
-          SERIAL_ECHOPAIR("> BEFORE apply_rotation_xyz > z_tmp  = ", z_tmp);
-          SERIAL_EOL;
-          SERIAL_ECHOPAIR("> BEFORE apply_rotation_xyz > real_z = ", real_z);
-          SERIAL_EOL;
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            SERIAL_ECHOPAIR("> BEFORE apply_rotation_xyz > z_tmp  = ", z_tmp);
+            SERIAL_EOL;
+            SERIAL_ECHOPAIR("> BEFORE apply_rotation_xyz > real_z = ", real_z);
+            SERIAL_EOL;
+          }
        #endif

        apply_rotation_xyz(plan_bed_level_matrix, x_tmp, y_tmp, z_tmp); // Apply the correction sending the Z probe offset
@ -3045,9 +3155,11 @@ inline void gcode_G28() {
        //      adjust for inaccurate endstops, not for reasonably accurate probes. If it were
        //      added here, it could be seen as a compensating factor for the Z probe.
        //
-        #ifdef DEBUG_LEVELING
-          SERIAL_ECHOPAIR("> AFTER apply_rotation_xyz > z_tmp  = ", z_tmp);
-          SERIAL_EOL;
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            SERIAL_ECHOPAIR("> AFTER apply_rotation_xyz > z_tmp  = ", z_tmp);
+            SERIAL_EOL;
+          }
        #endif

        current_position[Z_AXIS] = -zprobe_zoffset + (z_tmp - real_z)
@ -3058,8 +3170,10 @@ inline void gcode_G28() {
        // current_position[Z_AXIS] += home_offset[Z_AXIS]; // The Z probe determines Z=0, not "Z home"
        sync_plan_position();

-        #ifdef DEBUG_LEVELING
-          print_xyz("> corrected Z in G29", current_position);
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            print_xyz("> corrected Z in G29", current_position);
+          }
        #endif
      }
    #endif // !DELTA
@ -3071,16 +3185,20 @@ inline void gcode_G28() {
    #endif

    #ifdef Z_PROBE_END_SCRIPT
-      #ifdef DEBUG_LEVELING
-        SERIAL_ECHO("Z Probe End Script: ");
-        SERIAL_ECHOLNPGM(Z_PROBE_END_SCRIPT);
+      #if ENABLED(DEBUG_LEVELING_FEATURE)
+        if (marlin_debug_flags & DEBUG_LEVELING) {
+          SERIAL_ECHO("Z Probe End Script: ");
+          SERIAL_ECHOLNPGM(Z_PROBE_END_SCRIPT);
+        }
      #endif
      enqueuecommands_P(PSTR(Z_PROBE_END_SCRIPT));
      st_synchronize();
    #endif

-    #ifdef DEBUG_LEVELING
-      SERIAL_ECHOLNPGM("<<< gcode_G29");
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        SERIAL_ECHOLNPGM("<<< gcode_G29");
+      }
    #endif

  }
@ -3891,6 +4009,12 @@ inline void gcode_M111() {
    SERIAL_ECHOLNPGM(MSG_DEBUG_DRYRUN);
    disable_all_heaters();
  }
+#if ENABLED(DEBUG_LEVELING_FEATURE)
+  if (marlin_debug_flags & DEBUG_LEVELING) {
+    SERIAL_ECHO_START;
+    SERIAL_ECHOLNPGM(MSG_DEBUG_LEVELING);
+  }
+#endif
 }

 /**
@ -4377,22 +4501,28 @@ inline void gcode_M206() {
   * M666: Set delta endstop adjustment
   */
  inline void gcode_M666() {
-    #ifdef DEBUG_LEVELING
-      SERIAL_ECHOLNPGM(">>> gcode_M666");
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        SERIAL_ECHOLNPGM(">>> gcode_M666");
+      }
    #endif
    for (int8_t i = X_AXIS; i <= Z_AXIS; i++) {
      if (code_seen(axis_codes[i])) {
        endstop_adj[i] = code_value();
-        #ifdef DEBUG_LEVELING
-          SERIAL_ECHOPGM("endstop_adj[");
-          SERIAL_ECHO(axis_codes[i]);
-          SERIAL_ECHOPAIR("] = ", endstop_adj[i]);
-          SERIAL_EOL;
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            SERIAL_ECHOPGM("endstop_adj[");
+            SERIAL_ECHO(axis_codes[i]);
+            SERIAL_ECHOPAIR("] = ", endstop_adj[i]);
+            SERIAL_EOL;
+          }
        #endif
      }
    }
-    #ifdef DEBUG_LEVELING
-      SERIAL_ECHOLNPGM("<<< gcode_M666");
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (marlin_debug_flags & DEBUG_LEVELING) {
+        SERIAL_ECHOLNPGM("<<< gcode_M666");
+      }
    #endif
  }
 #elif ENABLED(Z_DUAL_ENDSTOPS) // !DELTA && ENABLED(Z_DUAL_ENDSTOPS)
@ -6096,9 +6226,11 @@ void clamp_to_software_endstops(float target[3]) {
    #if ENABLED(AUTO_BED_LEVELING_FEATURE)
      if (zprobe_zoffset < 0) negative_z_offset += zprobe_zoffset;
      if (home_offset[Z_AXIS] < 0) {
-        #ifdef DEBUG_LEVELING
-          SERIAL_ECHOPAIR("> clamp_to_software_endstops > Add home_offset[Z_AXIS]:", home_offset[Z_AXIS]);
-          SERIAL_EOL;
+        #if ENABLED(DEBUG_LEVELING_FEATURE)
+          if (marlin_debug_flags & DEBUG_LEVELING) {
+            SERIAL_ECHOPAIR("> clamp_to_software_endstops > Add home_offset[Z_AXIS]:", home_offset[Z_AXIS]);
+            SERIAL_EOL;
+          }
        #endif
        negative_z_offset += home_offset[Z_AXIS];
      }
--- a/Marlin/language.h
+++ b/Marlin/language.h
@ -214,6 +214,7 @@
 #define MSG_DEBUG_INFO                      "DEBUG INFO ENABLED"
 #define MSG_DEBUG_ERRORS                    "DEBUG ERRORS ENABLED"
 #define MSG_DEBUG_DRYRUN                    "DEBUG DRYRUN ENABLED"
+#define MSG_DEBUG_LEVELING                  "DEBUG LEVELING ENABLED"

 // LCD Menu Messages