Clean up config spacing, section headings, etc.

8 years ago · 1bd25fd2b3
parent 153b0ae967
commit 1bd25fd2b3
20 changed files with 25 additions and 26 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -695,7 +695,6 @@
 //#define Z_MIN_PROBE_ENDSTOP
 #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN

-
 // Enable Z Probe Repeatability test to see how accurate your probe is
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -677,7 +677,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
@ -971,14 +971,14 @@

 #endif // ENABLED(HAVE_TMC2130)

+// @section L6470
+
 /**
 * Enable this section if you have L6470 motor drivers.
 * You need to import the L6470 library into the Arduino IDE for this.
 * (https://github.com/ameyer/Arduino-L6470)
 */

-// @section l6470
-
 //#define HAVE_L6470DRIVER
 #if ENABLED(HAVE_L6470DRIVER)

--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@ -674,7 +674,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@ -674,7 +674,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@ -674,7 +674,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
--- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
@ -658,7 +658,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@ -687,7 +687,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
--- a/Marlin/example_configurations/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/K8400/Configuration_adv.h
@ -674,7 +674,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@ -674,7 +674,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@ -674,7 +674,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@ -682,7 +682,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@ -677,7 +677,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
@ -971,14 +971,14 @@

 #endif // ENABLED(HAVE_TMC2130)

+// @section L6470
+
 /**
 * Enable this section if you have L6470 motor drivers.
 * You need to import the L6470 library into the Arduino IDE for this.
 * (https://github.com/ameyer/Arduino-L6470)
 */

-// @section l6470
-
 //#define HAVE_L6470DRIVER
 #if ENABLED(HAVE_L6470DRIVER)

--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@ -674,7 +674,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@ -694,7 +694,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@ -694,7 +694,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@ -681,7 +681,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@ -676,7 +676,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@ -674,7 +674,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@ -674,7 +674,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@ -677,7 +677,7 @@
 //#define BEZIER_CURVE_SUPPORT

 // G38.2 and G38.3 Probe Target
-// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
+// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
 //#define G38_PROBE_TARGET
 #if ENABLED(G38_PROBE_TARGET)
  #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
@ -971,14 +971,14 @@

 #endif // ENABLED(HAVE_TMC2130)

+// @section L6470
+
 /**
 * Enable this section if you have L6470 motor drivers.
 * You need to import the L6470 library into the Arduino IDE for this.
 * (https://github.com/ameyer/Arduino-L6470)
 */

-// @section l6470
-
 //#define HAVE_L6470DRIVER
 #if ENABLED(HAVE_L6470DRIVER)