microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Pins cleanup

Browse Source
2.0.x
Scott Lahteine 6 years ago
parent 42be684e69
commit 179095c387
39 changed files with 123 additions and 124 deletions
Show Stats Download Patch File Download Diff File

18
Marlin/src/pins/linux/pins_RAMPS_LINUX.h
Unescape Escape View File

@ -133,9 +133,9 @@
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
#define MAX6675_SS_PIN 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card #define MAX6675_SS_PIN 66 // Don't use 53 if there is even the remote possibility of using Display/SD card
#else #else
#define MAX6675_SS_PIN 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS_PIN 66 // Don't use 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif #endif
// //
@ -222,9 +222,9 @@
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN) #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
#if NUM_SERVOS <= 1 // try to use servo connector first #if NUM_SERVOS <= 1 // try to use servo connector first
#define CASE_LIGHT_PIN 6 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 6 // Hardware PWM
#elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD)) // try to use AUX 2 #elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD)) // try to use AUX 2
#define CASE_LIGHT_PIN 44 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 44 // Hardware PWM
#endif #endif
#endif #endif
@ -233,12 +233,12 @@
// //
#if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA) #if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // try to use servo connector first #if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // try to use servo connector first
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
#define SPINDLE_DIR_PIN 5 #define SPINDLE_DIR_PIN 5
#elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD)) // try to use AUX 2 #elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD)) // try to use AUX 2
#define SPINDLE_LASER_ENA_PIN 40 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#define SPINDLE_DIR_PIN 65 #define SPINDLE_DIR_PIN 65
#endif #endif
#endif #endif
@ -542,7 +542,7 @@
// Beeper on AUX-4 // Beeper on AUX-4
#define BEEPER_PIN 33 #define BEEPER_PIN 33
// Buttons are directly attached using AUX-2 // Buttons are directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD) #if ENABLED(REPRAPWORLD_KEYPAD)
#define SHIFT_OUT 40 #define SHIFT_OUT 40
#define SHIFT_CLK 44 #define SHIFT_CLK 44

4
Marlin/src/pins/mega/pins_MEGACONTROLLER.h
Unescape Escape View File

@ -161,6 +161,6 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 7 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 7 // Pullup!
#define SPINDLE_DIR_PIN 8 #define SPINDLE_DIR_PIN 8

6
Marlin/src/pins/mega/pins_MEGATRONICS.h
Unescape Escape View File

@ -114,7 +114,7 @@
#define LCD_PINS_D6 27 #define LCD_PINS_D6 27
#define LCD_PINS_D7 29 #define LCD_PINS_D7 29
// Buttons directly attached using AUX-2 // Buttons directly attached to AUX-2
#define BTN_EN1 59 #define BTN_EN1 59
#define BTN_EN2 64 #define BTN_EN2 64
#define BTN_ENC 43 #define BTN_ENC 43
@ -126,6 +126,6 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_PWM_PIN 3 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 3 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 4 // Pullup!
#define SPINDLE_DIR_PIN 11 #define SPINDLE_DIR_PIN 11

4
Marlin/src/pins/mega/pins_MEGATRONICS_2.h
Unescape Escape View File

@ -141,6 +141,6 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_PWM_PIN 3 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 3 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 16 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 16 // Pullup!
#define SPINDLE_DIR_PIN 11 #define SPINDLE_DIR_PIN 11

8
Marlin/src/pins/mega/pins_MEGATRONICS_3.h
Unescape Escape View File

@ -174,8 +174,8 @@
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#if DISABLED(REPRAPWORLD_KEYPAD) // try to use the keypad connector first #if DISABLED(REPRAPWORLD_KEYPAD) // try to use the keypad connector first
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 43 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 43 // Pullup!
#define SPINDLE_DIR_PIN 42 #define SPINDLE_DIR_PIN 42
#elif EXTRUDERS <= 2 #elif EXTRUDERS <= 2
// Hijack the last extruder so that we can get the PWM signal off the Y breakout // Hijack the last extruder so that we can get the PWM signal off the Y breakout
@ -189,7 +189,7 @@
#define Y_ENABLE_PIN 23 #define Y_ENABLE_PIN 23
#define Y_STEP_PIN 22 #define Y_STEP_PIN 22
#define Y_DIR_PIN 60 #define Y_DIR_PIN 60
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 17 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 17 // Pullup!
#define SPINDLE_DIR_PIN 5 #define SPINDLE_DIR_PIN 5
#endif #endif

4
Marlin/src/pins/rambo/pins_EINSY_RAMBO.h
Unescape Escape View File

@ -135,8 +135,8 @@
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
// use P1 connector for spindle pins // use P1 connector for spindle pins
#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 18 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 18 // Pullup!
#define SPINDLE_DIR_PIN 19 #define SPINDLE_DIR_PIN 19
// //

4
Marlin/src/pins/rambo/pins_EINSY_RETRO.h
Unescape Escape View File

@ -149,8 +149,8 @@
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
// use P1 connector for spindle pins // use P1 connector for spindle pins
#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 18 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 18 // Pullup!
#define SPINDLE_DIR_PIN 19 #define SPINDLE_DIR_PIN 19
// //

4
Marlin/src/pins/rambo/pins_MINIRAMBO.h
Unescape Escape View File

@ -125,8 +125,8 @@
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
// use P1 connector for spindle pins // use P1 connector for spindle pins
#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 18 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 18 // Pullup!
#define SPINDLE_DIR_PIN 19 #define SPINDLE_DIR_PIN 19
// //

4
Marlin/src/pins/rambo/pins_RAMBO.h
Unescape Escape View File

@ -149,8 +149,8 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 45 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 31 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 31 // Pullup!
#define SPINDLE_DIR_PIN 32 #define SPINDLE_DIR_PIN 32
// //

8
Marlin/src/pins/ramps/pins_3DRAG.h
Unescape Escape View File

@ -44,7 +44,7 @@
#define RAMPS_D9_PIN 8 #define RAMPS_D9_PIN 8
#define MOSFET_D_PIN 12 #define MOSFET_D_PIN 12
#define CASE_LIGHT_PIN -1 // MUST BE HARDWARE PWM but one is not available on expansion header #define CASE_LIGHT_PIN -1 // Hardware PWM but one is not available on expansion header
#include "pins_RAMPS.h" #include "pins_RAMPS.h"
@ -152,11 +152,11 @@
#define Z_DIR_PIN 28 #define Z_DIR_PIN 28
#define Z_ENABLE_PIN 24 #define Z_ENABLE_PIN 24
#define Z_STEP_PIN 26 #define Z_STEP_PIN 26
#define SPINDLE_LASER_PWM_PIN 46 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 46 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 62 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 62 // Pullup!
#define SPINDLE_DIR_PIN 48 #define SPINDLE_DIR_PIN 48
#elif !BOTH(ULTRA_LCD, NEWPANEL) // use expansion header if no LCD in use #elif !BOTH(ULTRA_LCD, NEWPANEL) // use expansion header if no LCD in use
#define SPINDLE_LASER_ENA_PIN 16 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 16 // Pullup or pulldown!
#define SPINDLE_DIR_PIN 17 #define SPINDLE_DIR_PIN 17
#endif #endif
#endif #endif

4
Marlin/src/pins/ramps/pins_AZTEEG_X3.h
Unescape Escape View File

@ -92,7 +92,7 @@
#undef SERVO0_PIN #undef SERVO0_PIN
#define SERVO0_PIN 11 #define SERVO0_PIN 11
#endif #endif
#define SPINDLE_LASER_PWM_PIN 7 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 7 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 20 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 20 // Pullup!
#define SPINDLE_DIR_PIN 21 #define SPINDLE_DIR_PIN 21
#endif #endif

9
Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h
Unescape Escape View File

@ -160,10 +160,9 @@
#if HAS_CUTTER // EXP2 header #if HAS_CUTTER // EXP2 header
#if ANY(VIKI2, miniVIKI) #if ANY(VIKI2, miniVIKI)
#undef BTN_EN2 #define BTN_EN2 31 // Pin 7 needed for Spindle PWM
#define BTN_EN2 31 // need 7 for the spindle speed PWM
#endif #endif
#define SPINDLE_LASER_PWM_PIN 7 // must have a hardware PWM #define SPINDLE_LASER_PWM_PIN 7 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 20 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 20 // Pullup!
#define SPINDLE_DIR_PIN 21 #define SPINDLE_DIR_PIN 21
#endif #endif

4
Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h
Unescape Escape View File

@ -34,9 +34,9 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENA_PIN 66 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 66 // Pullup or pulldown!
#define SPINDLE_DIR_PIN 67 #define SPINDLE_DIR_PIN 67
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#include "pins_RAMPS.h" #include "pins_RAMPS.h"

6
Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h
Unescape Escape View File

@ -50,8 +50,8 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENA_PIN 40 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#define SPINDLE_DIR_PIN 42 #define SPINDLE_DIR_PIN 42
// //
@ -94,7 +94,7 @@
#undef PS_ON_PIN // 12 #undef PS_ON_PIN // 12
#define PS_ON_PIN 81 // External Power Supply #define PS_ON_PIN 81 // External Power Supply
#define CASE_LIGHT_PIN 44 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 44 // Hardware PWM
// This board has headers for Z-min, Z-max and IND_S_5V *but* as the bq team // This board has headers for Z-min, Z-max and IND_S_5V *but* as the bq team

4
Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h
Unescape Escape View File

@ -113,9 +113,9 @@
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
#define MAX6675_SS_PIN 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card #define MAX6675_SS_PIN 66 // Don't use 53 if there is even the remote possibility of using Display/SD card
#else #else
#define MAX6675_SS_PIN 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS_PIN 66 // Don't use 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif #endif
// //

12
Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h
Unescape Escape View File

@ -43,21 +43,21 @@
// //
#if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA) #if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if !NUM_SERVOS // Try to use servo connector first #if !NUM_SERVOS // Try to use servo connector first
#define SPINDLE_LASER_ENA_PIN 6 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 6 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM
#define SPINDLE_DIR_PIN 5 #define SPINDLE_DIR_PIN 5
#elif !GREEDY_PANEL // Try to use AUX2 #elif !GREEDY_PANEL // Try to use AUX2
#define SPINDLE_LASER_ENA_PIN 40 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#define SPINDLE_DIR_PIN 65 #define SPINDLE_DIR_PIN 65
#endif #endif
#endif #endif
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) #if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT)
#if NUM_SERVOS <= 1 // Try to use servo connector first #if NUM_SERVOS <= 1 // Try to use servo connector first
#define CASE_LIGHT_PIN 6 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 6 // Hardware PWM
#elif !GREEDY_PANEL // Try to use AUX2 #elif !GREEDY_PANEL // Try to use AUX2
#define CASE_LIGHT_PIN 44 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 44 // Hardware PWM
#endif #endif
#endif #endif

4
Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h
Unescape Escape View File

@ -114,9 +114,9 @@
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
#define MAX6675_SS_PIN 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card #define MAX6675_SS_PIN 66 // Don't use 53 if there is even the remote possibility of using Display/SD card
#else #else
#define MAX6675_SS_PIN 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS_PIN 66 // Don't use 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif #endif
// //

8
Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h
Unescape Escape View File

@ -114,9 +114,9 @@
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
#define MAX6675_SS_PIN 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card #define MAX6675_SS_PIN 66 // Don't use 53 if there is even the remote possibility of using Display/SD card
#else #else
#define MAX6675_SS_PIN 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS_PIN 66 // Don't use 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif #endif
@ -144,8 +144,8 @@
#define LED_PIN 13 #define LED_PIN 13
#endif #endif
#define SPINDLE_LASER_PWM_PIN -1 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN -1 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 4 // Pullup!
// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector // Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
#define FILWIDTH_PIN 5 // Analog Input #define FILWIDTH_PIN 5 // Analog Input

4
Marlin/src/pins/ramps/pins_MKS_BASE.h
Unescape Escape View File

@ -44,8 +44,8 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_PWM_PIN 2 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 2 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 15 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 15 // Pullup!
#define SPINDLE_DIR_PIN 19 #define SPINDLE_DIR_PIN 19
#include "pins_RAMPS.h" #include "pins_RAMPS.h"

18
Marlin/src/pins/ramps/pins_RAMPS.h
Unescape Escape View File

@ -169,9 +169,9 @@
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
#define MAX6675_SS_PIN 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card #define MAX6675_SS_PIN 66 // Don't use 53 if there is even the remote possibility of using Display/SD card
#else #else
#define MAX6675_SS_PIN 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS_PIN 66 // Don't use 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif #endif
// //
@ -262,9 +262,9 @@
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN) #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
#if NUM_SERVOS <= 1 // try to use servo connector first #if NUM_SERVOS <= 1 // try to use servo connector first
#define CASE_LIGHT_PIN 6 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 6 // Hardware PWM
#elif AUX2_PINS_FREE #elif AUX2_PINS_FREE
#define CASE_LIGHT_PIN 44 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 44 // Hardware PWM
#endif #endif
#endif #endif
@ -273,12 +273,12 @@
// //
#if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN) #if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN)
#if !NUM_SERVOS // Use servo connector if possible #if !NUM_SERVOS // Use servo connector if possible
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
#define SPINDLE_DIR_PIN 5 #define SPINDLE_DIR_PIN 5
#elif AUX2_PINS_FREE #elif AUX2_PINS_FREE
#define SPINDLE_LASER_ENA_PIN 40 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#define SPINDLE_DIR_PIN 65 #define SPINDLE_DIR_PIN 65
#else #else
#error "No auto-assignable Spindle/Laser pins available." #error "No auto-assignable Spindle/Laser pins available."
@ -621,7 +621,7 @@
// Beeper on AUX-4 // Beeper on AUX-4
#define BEEPER_PIN 33 #define BEEPER_PIN 33
// Buttons are directly attached using AUX-2 // Buttons are directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD) #if ENABLED(REPRAPWORLD_KEYPAD)
#define SHIFT_OUT 40 #define SHIFT_OUT 40
#define SHIFT_CLK 44 #define SHIFT_CLK 44

10
Marlin/src/pins/ramps/pins_RAMPS_OLD.h
Unescape Escape View File

@ -78,9 +78,9 @@
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
#define MAX6675_SS_PIN 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card #define MAX6675_SS_PIN 66 // Don't use 53 if there is even the remote possibility of using Display/SD card
#else #else
#define MAX6675_SS_PIN 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS_PIN 66 // Don't use 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif #endif
// //
@ -106,11 +106,11 @@
#define SDPOWER 48 #define SDPOWER 48
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define CASE_LIGHT_PIN 45 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 45 // Hardware PWM
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENA_PIN 41 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 41 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 45 // Hardware PWM
#define SPINDLE_DIR_PIN 43 #define SPINDLE_DIR_PIN 43

4
Marlin/src/pins/ramps/pins_RUMBA.h
Unescape Escape View File

@ -156,10 +156,10 @@
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#ifndef SPINDLE_LASER_PWM_PIN #ifndef SPINDLE_LASER_PWM_PIN
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM. Pin 4 interrupts OC0* and OC1* always in use? #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM. Pin 4 interrupts OC0* and OC1* always in use?
#endif #endif
#ifndef SPINDLE_LASER_ENA_PIN #ifndef SPINDLE_LASER_ENA_PIN
#define SPINDLE_LASER_ENA_PIN 14 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 14 // Pullup!
#endif #endif
#ifndef SPINDLE_DIR_PIN #ifndef SPINDLE_DIR_PIN
#define SPINDLE_DIR_PIN 15 #define SPINDLE_DIR_PIN 15

4
Marlin/src/pins/ramps/pins_ULTIMAIN_2.h
Unescape Escape View File

@ -132,8 +132,8 @@
#if HAS_CUTTER // use the LED_PIN for spindle speed control or case light #if HAS_CUTTER // use the LED_PIN for spindle speed control or case light
#undef LED_PIN #undef LED_PIN
#define SPINDLE_DIR_PIN 16 #define SPINDLE_DIR_PIN 16
#define SPINDLE_LASER_ENA_PIN 17 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 17 // Pullup!
#define SPINDLE_LASER_PWM_PIN 8 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 8 // Hardware PWM
#else #else
#undef LED_PIN #undef LED_PIN
#define CASE_LIGHT_PIN 8 #define CASE_LIGHT_PIN 8

4
Marlin/src/pins/ramps/pins_ULTIMAKER.h
Unescape Escape View File

@ -160,6 +160,6 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 10 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 10 // Pullup!
#define SPINDLE_DIR_PIN 11 // use the EXP3 PWM header #define SPINDLE_DIR_PIN 11 // use the EXP3 PWM header

8
Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h
Unescape Escape View File

@ -242,13 +242,13 @@
*/ */
#if EXTRUDERS == 1 #if EXTRUDERS == 1
#define SPINDLE_DIR_PIN 43 #define SPINDLE_DIR_PIN 43
#define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 45 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 41 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 41 // Pullup!
#elif TEMP_SENSOR_BED == 0 // Can't use E0 so see if HEATER_BED_PIN is available #elif TEMP_SENSOR_BED == 0 // Can't use E0 so see if HEATER_BED_PIN is available
#undef HEATER_BED_PIN #undef HEATER_BED_PIN
#define SPINDLE_DIR_PIN 38 // Probably pin 4 on 10 pin connector closest to the E0 socket #define SPINDLE_DIR_PIN 38 // Probably pin 4 on 10 pin connector closest to the E0 socket
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM - Special precautions usually needed. #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM - Special precautions usually needed.
#define SPINDLE_LASER_ENA_PIN 40 // Pin should have a pullup! (Probably pin 6 on the 10-pin #define SPINDLE_LASER_ENA_PIN 40 // Pullup! (Probably pin 6 on the 10-pin
// connector closest to the E0 socket) // connector closest to the E0 socket)
#endif #endif
#endif #endif

12
Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h
Unescape Escape View File

@ -161,9 +161,9 @@
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN) #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
#if NUM_SERVOS <= 1 // try to use servo connector first #if NUM_SERVOS <= 1 // try to use servo connector first
#define CASE_LIGHT_PIN 6 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 6 // Hardware PWM
#elif AUX2_PINS_FREE #elif AUX2_PINS_FREE
#define CASE_LIGHT_PIN 44 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 44 // Hardware PWM
#endif #endif
#endif #endif
@ -172,12 +172,12 @@
// //
#if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA) #if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // try to use servo connector first #if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // try to use servo connector first
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
#define SPINDLE_DIR_PIN 5 #define SPINDLE_DIR_PIN 5
#elif AUX2_PINS_FREE #elif AUX2_PINS_FREE
#define SPINDLE_LASER_ENA_PIN 40 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#define SPINDLE_DIR_PIN 65 #define SPINDLE_DIR_PIN 65
#endif #endif
#endif #endif

4
Marlin/src/pins/sam/pins_RAMPS_DUO.h
Unescape Escape View File

@ -67,9 +67,9 @@
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#undef MAX6675_SS_PIN #undef MAX6675_SS_PIN
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
#define MAX6675_SS_PIN 69 // Do not use pin 53 if there is even the remote possibility of using Display/SD card #define MAX6675_SS_PIN 69 // Don't use 53 if there is even the remote possibility of using Display/SD card
#else #else
#define MAX6675_SS_PIN 69 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS_PIN 69 // Don't use 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif #endif
// //

2
Marlin/src/pins/sam/pins_RAMPS_FD_V1.h
Unescape Escape View File

@ -230,6 +230,6 @@
// //
#if HOTENDS < 3 && HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA) #if HOTENDS < 3 && HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
#define SPINDLE_LASER_ENA_PIN 45 // Use E2 ENA #define SPINDLE_LASER_ENA_PIN 45 // Use E2 ENA
#define SPINDLE_LASER_PWM_PIN 12 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 12 // Hardware PWM
#define SPINDLE_DIR_PIN 47 // Use E2 DIR #define SPINDLE_DIR_PIN 47 // Use E2 DIR
#endif #endif

4
Marlin/src/pins/sam/pins_RAMPS_SMART.h
Unescape Escape View File

@ -90,9 +90,9 @@
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#undef MAX6675_SS_PIN #undef MAX6675_SS_PIN
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
#define MAX6675_SS_PIN 67 // Do not use pin 53 if there is even the remote possibility of using Display/SD card #define MAX6675_SS_PIN 67 // Don't use 53 if there is even the remote possibility of using Display/SD card
#else #else
#define MAX6675_SS_PIN 67 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS_PIN 67 // Don't use 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif #endif
// //

6
Marlin/src/pins/sanguino/pins_GEN6.h
Unescape Escape View File

@ -106,7 +106,7 @@
// //
#define SDSS 17 #define SDSS 17
#define DEBUG_PIN 0 #define DEBUG_PIN 0
#define CASE_LIGHT_PIN 16 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 16 // Hardware PWM
// RS485 pins // RS485 pins
#define TX_ENABLE_PIN 12 #define TX_ENABLE_PIN 12
@ -115,6 +115,6 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENA_PIN 5 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 5 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 16 // Hardware PWM
#define SPINDLE_DIR_PIN 6 #define SPINDLE_DIR_PIN 6

10
Marlin/src/pins/sanguino/pins_GEN7_12.h
Unescape Escape View File

@ -123,9 +123,9 @@
#define PS_ON_PIN 15 #define PS_ON_PIN 15
#if GEN7_VERSION < 13 #if GEN7_VERSION < 13
#define CASE_LIGHT_PIN 16 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 16 // Hardware PWM
#else // Gen7 v1.3 removed the I2C connector & signals so need to get PWM off the PC power supply header #else // Gen7 v1.3 removed the I2C connector & signals so need to get PWM off the PC power supply header
#define CASE_LIGHT_PIN 15 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 15 // Hardware PWM
#endif #endif
// All these generations of Gen7 supply thermistor power // All these generations of Gen7 supply thermistor power
@ -141,10 +141,10 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENA_PIN 10 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 10 // Pullup or pulldown!
#define SPINDLE_DIR_PIN 11 #define SPINDLE_DIR_PIN 11
#if GEN7_VERSION < 13 #if GEN7_VERSION < 13
#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 16 // Hardware PWM
#else // Gen7 v1.3 removed the I2C connector & signals so need to get PWM off the PC power supply header #else // Gen7 v1.3 removed the I2C connector & signals so need to get PWM off the PC power supply header
#define SPINDLE_LASER_PWM_PIN 15 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 15 // Hardware PWM
#endif #endif

6
Marlin/src/pins/sanguino/pins_GEN7_14.h
Unescape Escape View File

@ -102,7 +102,7 @@
// Misc. Functions // Misc. Functions
// //
#define PS_ON_PIN 15 #define PS_ON_PIN 15
#define CASE_LIGHT_PIN 15 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 15 // Hardware PWM
// A pin for debugging // A pin for debugging
#define DEBUG_PIN 0 #define DEBUG_PIN 0
@ -114,6 +114,6 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENA_PIN 20 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 20 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 16 // Hardware PWM
#define SPINDLE_DIR_PIN 21 #define SPINDLE_DIR_PIN 21

6
Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h
Unescape Escape View File

@ -104,7 +104,7 @@
// //
#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support #define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support
#define PS_ON_PIN 19 #define PS_ON_PIN 19
#define CASE_LIGHT_PIN 15 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 15 // Hardware PWM
// A pin for debugging // A pin for debugging
#define DEBUG_PIN -1 #define DEBUG_PIN -1
@ -134,6 +134,6 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENA_PIN 5 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 5 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 16 // Hardware PWM
#define SPINDLE_DIR_PIN 6 #define SPINDLE_DIR_PIN 6

10
Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h
Unescape Escape View File

@ -139,7 +139,7 @@
#endif #endif
#if NONE(SPINDLE_FEATURE, LASER_FEATURE) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL) // try to use IO Header #if NONE(SPINDLE_FEATURE, LASER_FEATURE) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL) // try to use IO Header
#define CASE_LIGHT_PIN 4 // MUST BE HARDWARE PWM - see if IO Header is available #define CASE_LIGHT_PIN 4 // Hardware PWM - see if IO Header is available
#endif #endif
/** /**
@ -280,8 +280,8 @@
#if HAS_CUTTER #if HAS_CUTTER
#if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL) // try to use IO Header #if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL) // try to use IO Header
#define SPINDLE_LASER_ENA_PIN 10 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENA_PIN 10 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM
#define SPINDLE_DIR_PIN 11 #define SPINDLE_DIR_PIN 11
#elif !MB(MELZI) // use X stepper motor socket #elif !MB(MELZI) // use X stepper motor socket
@ -319,8 +319,8 @@
#define X_DIR_PIN 0 #define X_DIR_PIN 0
#define X_ENABLE_PIN 14 #define X_ENABLE_PIN 14
#define X_STEP_PIN 1 #define X_STEP_PIN 1
#define SPINDLE_LASER_PWM_PIN 15 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 15 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 21 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 21 // Pullup!
#define SPINDLE_DIR_PIN -1 // No pin available on the socket for the direction pin #define SPINDLE_DIR_PIN -1 // No pin available on the socket for the direction pin
#endif #endif
#endif #endif

12
Marlin/src/pins/stm32/pins_ARMED.h
Unescape Escape View File

@ -113,13 +113,13 @@
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN PA1 // PWM pin #define HEATER_0_PIN PA1 // Hardware PWM
#define HEATER_1_PIN PA2 // PWM pin #define HEATER_1_PIN PA2 // Hardware PWM
#define HEATER_BED_PIN PA0 // PWM pin #define HEATER_BED_PIN PA0 // Hardware PWM
#define FAN_PIN PC6 // PWM pin, Part cooling fan #define FAN_PIN PC6 // Hardware PWM, Part cooling fan
#define FAN1_PIN PC7 // PWM pin, Extruder fan #define FAN1_PIN PC7 // Hardware PWM, Extruder fan
#define FAN2_PIN PC8 // PWM pin, Controller fan #define FAN2_PIN PC8 // Hardware PWM, Controller fan
// //
// Misc functions // Misc functions

2
Marlin/src/pins/stm32/pins_BEAST.h
Unescape Escape View File

@ -255,7 +255,7 @@
// Beeper on AUX-4 // Beeper on AUX-4
#define BEEPER_PIN 33 #define BEEPER_PIN 33
// buttons are directly attached using AUX-2 // buttons are directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD) #if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 #define BTN_EN1 64
#define BTN_EN2 59 #define BTN_EN2 59

2
Marlin/src/pins/stm32/pins_CHITU3D.h
Unescape Escape View File

@ -253,7 +253,7 @@
// Beeper on AUX-4 // Beeper on AUX-4
#define BEEPER_PIN 33 #define BEEPER_PIN 33
// buttons are directly attached using AUX-2 // buttons are directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD) #if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 #define BTN_EN1 64
#define BTN_EN2 59 #define BTN_EN2 59

2
Marlin/src/pins/stm32/pins_STM32F1R.h
Unescape Escape View File

@ -233,7 +233,7 @@
// Beeper on AUX-4 // Beeper on AUX-4
#define BEEPER_PIN 33 #define BEEPER_PIN 33
// buttons are directly attached using AUX-2 // buttons are directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD) #if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 #define BTN_EN1 64
#define BTN_EN2 59 #define BTN_EN2 59

2
Marlin/src/pins/stm32/pins_STM3R_MINI.h
Unescape Escape View File

@ -249,7 +249,7 @@
// Beeper on AUX-4 // Beeper on AUX-4
#define BEEPER_PIN 33 #define BEEPER_PIN 33
// buttons are directly attached using AUX-2 // buttons are directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD) #if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 #define BTN_EN1 64
#define BTN_EN2 59 #define BTN_EN2 59

Write Preview
Loading…
Cancel
Save