Combine Z raise before/after options

Marlin/Conditionals.h

@@ -796,6 +796,14 @@
         #define XY_PROBE_SPEED 4000
       #endif
     #endif
+    #ifndef Z_RAISE_PROBE_DEPLOY_STOW
+      #if defined(Z_RAISE_BEFORE_PROBING) && defined(Z_RAISE_AFTER_PROBING)
+        #define Z_RAISE_PROBE_DEPLOY_STOW (max(Z_RAISE_BEFORE_PROBING, Z_RAISE_AFTER_PROBING))
+      #else
+        #error "You must set Z_RAISE_PROBE_DEPLOY_STOW in your configuration."
+      #endif
+    #endif
+    #define _Z_RAISE_PROBE_DEPLOY_STOW (max(Z_RAISE_PROBE_DEPLOY_STOW, Z_RAISE_BETWEEN_PROBINGS))
   #endif
 
   /**

Marlin/Configuration.h

@@ -509,12 +509,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 15 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/Marlin_main.cpp

@@ -1767,8 +1767,8 @@ static void clean_up_after_endstop_or_probe_move() {
     float oldXpos = current_position[X_AXIS]; // save x position
     float old_feedrate = feedrate;
     if (dock) {
-      #if Z_RAISE_AFTER_PROBING > 0
+      #if _Z_RAISE_PROBE_DEPLOY_STOW > 0
-        do_probe_raise(Z_RAISE_AFTER_PROBING);
+        do_probe_raise(_Z_RAISE_PROBE_DEPLOY_STOW);
       #endif
       // Dock sled a bit closer to ensure proper capturing
       feedrate = XY_PROBE_FEEDRATE;
@@ -1778,7 +1778,7 @@ static void clean_up_after_endstop_or_probe_move() {
     else {
       feedrate = XY_PROBE_FEEDRATE;
       float z_loc = current_position[Z_AXIS];
-      if (z_loc < Z_RAISE_BEFORE_PROBING + 5) z_loc = Z_RAISE_BEFORE_PROBING;
+      if (z_loc < _Z_RAISE_PROBE_DEPLOY_STOW + 5) z_loc = _Z_RAISE_PROBE_DEPLOY_STOW;
       do_blocking_move_to(X_MAX_POS + SLED_DOCKING_OFFSET + offset, current_position[Y_AXIS], z_loc); // this also updates current_position
       digitalWrite(SLED_PIN, HIGH); // turn on magnet
     }
@@ -1800,8 +1800,8 @@ static void clean_up_after_endstop_or_probe_move() {
     if (endstops.z_probe_enabled) return;
 
     // Make room for probe
-    #if Z_RAISE_BEFORE_PROBING > 0
+    #if _Z_RAISE_PROBE_DEPLOY_STOW > 0
-      do_probe_raise(Z_RAISE_BEFORE_PROBING);
+      do_probe_raise(_Z_RAISE_PROBE_DEPLOY_STOW);
     #endif
 
     #if ENABLED(Z_PROBE_SLED)
@@ -1904,8 +1904,8 @@ static void clean_up_after_endstop_or_probe_move() {
     if (!endstops.z_probe_enabled) return;
 
     // Make more room for the servo
-    #if Z_RAISE_AFTER_PROBING > 0
+    #if _Z_RAISE_PROBE_DEPLOY_STOW > 0
-      do_probe_raise(Z_RAISE_AFTER_PROBING);
+      do_probe_raise(_Z_RAISE_PROBE_DEPLOY_STOW);
     #endif
 
     #if ENABLED(Z_PROBE_SLED)
@@ -1924,8 +1924,8 @@ static void clean_up_after_endstop_or_probe_move() {
       // Move up for safety
       feedrate = Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE;
 
-      #if Z_RAISE_AFTER_PROBING > 0
+      #if _Z_RAISE_PROBE_DEPLOY_STOW > 0
-        destination[Z_AXIS] = current_position[Z_AXIS] + Z_RAISE_AFTER_PROBING;
+        destination[Z_AXIS] = current_position[Z_AXIS] + _Z_RAISE_PROBE_DEPLOY_STOW;
         prepare_move_to_destination_raw(); // this will also set_current_to_destination
       #endif
 
@@ -3596,7 +3596,7 @@ inline void gcode_G28() {
 
     #endif // !AUTO_BED_LEVELING_GRID
 
-    // Raise to Z_RAISE_AFTER_PROBING. Stow the probe.
+    // Raise to _Z_RAISE_PROBE_DEPLOY_STOW. Stow the probe.
     stow_z_probe();
 
     // Restore state after probing

Marlin/example_configurations/Cartesio/Configuration.h

@@ -508,12 +508,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 15 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/example_configurations/Felix/Configuration.h

@@ -491,12 +491,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 15 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -489,12 +489,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 15 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/example_configurations/Hephestos/Configuration.h

@@ -501,12 +501,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 15 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -503,12 +503,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW  5 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 5    // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 5     // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 2  // Raise between probing points.
 
 //

Marlin/example_configurations/K8200/Configuration.h

@@ -526,12 +526,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 15 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -509,12 +509,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 15 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/example_configurations/RigidBot/Configuration.h

@@ -503,12 +503,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 15 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/example_configurations/SCARA/Configuration.h

@@ -517,12 +517,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 15 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/example_configurations/TAZ4/Configuration.h

@@ -530,12 +530,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 15 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/example_configurations/WITBOX/Configuration.h

@@ -501,12 +501,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 15 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -509,12 +509,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 15 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -588,12 +588,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 50 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 50    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/example_configurations/delta/generic/Configuration.h

@@ -582,12 +582,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 15 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 50    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -585,12 +585,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 50 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 50    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -579,12 +579,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 100 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 100  // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -580,12 +580,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 20 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 20   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 20    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 10 // Raise between probing points.
 
 //

Marlin/example_configurations/makibox/Configuration.h

@@ -512,12 +512,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 15 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -499,12 +499,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 //
-// Probe Raise options provide clearance for the probe to deploy and stow.
+// Probe Raise options provide clearance for the probe to deploy, stow, and travel.
 //
-// For G28 these apply when the probe deploys and stows.
+#define Z_RAISE_PROBE_DEPLOY_STOW 15 // Raise to make room for the probe to deploy / stow
-// For G29 these apply before and after the full procedure.
-#define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
-#define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
 #define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //