M16 - Expected Printer Check (#14924)

Marlin/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

Marlin/src/gcode/gcode.cpp

@@ -342,6 +342,10 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
         case 12: M12(); break;                                    // M12: Synchronize and optionally force a CLC set
       #endif
 
+      #if ENABLED(EXPECTED_PRINTER_CHECK)
+        case 16: M16(); break;                                    // M16: Expected printer check
+      #endif
+
       case 17: M17(); break;                                      // M17: Enable all stepper motors
 
       #if ENABLED(SDSUPPORT)

Marlin/src/gcode/gcode.h

@@ -83,6 +83,7 @@
  * M8   - Turn flood coolant ON. (Requires COOLANT_CONTROL)
  * M9   - Turn coolant OFF. (Requires COOLANT_CONTROL)
  * M12  - Set up closed loop control system. (Requires EXTERNAL_CLOSED_LOOP_CONTROLLER)
+ * M16  - Expected printer check. (Requires EXPECTED_PRINTER_CHECK)
  * M17  - Enable/Power all stepper motors
  * M18  - Disable all stepper motors; same as M84
  * M20  - List SD card. (Requires SDSUPPORT)
@@ -472,6 +473,10 @@ private:
     static void M12();
   #endif
 
+  #if ENABLED(EXPECTED_PRINTER_CHECK)
+    static void M16();
+  #endif
+
   static void M17();
 
   static void M18_M84();

Marlin/src/gcode/host/M16.cpp

@@ -0,0 +1,40 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if ENABLED(EXPECTED_PRINTER_CHECK)
+
+#include "../gcode.h"
+#include "../../Marlin.h"
+
+/**
+ * M16: Expected Printer Check
+ */
+void GcodeSuite::M16() {
+
+  if (strcmp_P(parser.string_arg, PSTR(MACHINE_NAME)))
+    kill(PSTR(MSG_EXPECTED_PRINTER));
+
+}
+
+#endif

Marlin/src/gcode/parser.cpp

@@ -225,6 +225,9 @@ void GCodeParser::parse(char *p) {
       case 810: case 811: case 812: case 813: case 814:
       case 815: case 816: case 817: case 818: case 819:
     #endif
+    #if ENABLED(EXPECTED_PRINTER_CHECK)
+      case 16:
+    #endif
     case 23: case 28: case 30: case 117: case 118: case 928: string_arg = p; return;
     default: break;
   }

Marlin/src/lcd/language/language_bg.h

@@ -144,3 +144,4 @@
 #define MSG_DELTA_CALIBRATE_Y               _UxGT("Калибровка Y")
 #define MSG_DELTA_CALIBRATE_Z               _UxGT("Калибровка Z")
 #define MSG_DELTA_CALIBRATE_CENTER          _UxGT("Калибровка Център")
+#define MSG_EXPECTED_PRINTER                _UxGT("Неправилен принтер")

Marlin/src/lcd/language/language_ca.h

@@ -231,6 +231,8 @@
 #define MSG_DAC_EEPROM_WRITE                _UxGT("DAC EEPROM Write")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Repren impressió")
 
+#define MSG_EXPECTED_PRINTER                _UxGT("Impressora incorrecta")
+
 //
 // Filament Change screens show up to 3 lines on a 4-line display
 //                        ...or up to 2 lines on a 3-line display

Marlin/src/lcd/language/language_cz.h

@@ -495,6 +495,8 @@
 #define MSG_SNAKE                           _UxGT("Sn4k3")
 #define MSG_MAZE                            _UxGT("Bludiště")
 
+#define MSG_EXPECTED_PRINTER                _UxGT("Nesprávná tiskárna")
+
 #if LCD_HEIGHT >= 4
   // Up to 3 lines allowed
   #define MSG_ADVANCED_PAUSE_WAITING_1      _UxGT("Stikněte tlačítko")

Marlin/src/lcd/language/language_da.h

@@ -229,6 +229,8 @@
 
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Forsæt print")
 
+#define MSG_EXPECTED_PRINTER                _UxGT("Forkert printer")
+
 #if LCD_HEIGHT >= 4
   #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Vent på start")
   #define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("af filament")

Marlin/src/lcd/language/language_de.h

@@ -409,6 +409,8 @@
 #define MSG_CASE_LIGHT                      _UxGT("Beleuchtung")
 #define MSG_CASE_LIGHT_BRIGHTNESS           _UxGT("Helligkeit")
 
+#define MSG_EXPECTED_PRINTER                _UxGT("Falscher Drucker")
+
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Gesamte Drucke")
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Komplette Drucke")

Marlin/src/lcd/language/language_el-gr.h

@@ -185,3 +185,5 @@
 #define MSG_DELTA_CALIBRATE_Y               _UxGT("Βαθμονόμηση Y")
 #define MSG_DELTA_CALIBRATE_Z               _UxGT("Βαθμονόμηση Z")
 #define MSG_DELTA_CALIBRATE_CENTER          _UxGT("Βαθμονόμηση κέντρου")
+
+#define MSG_EXPECTED_PRINTER                _UxGT("Εσφαλμένος εκτυπωτής")

Marlin/src/lcd/language/language_el.h

@@ -186,3 +186,5 @@
 #define MSG_DELTA_CALIBRATE_Y               _UxGT("Βαθμονόμηση Y")
 #define MSG_DELTA_CALIBRATE_Z               _UxGT("Βαθμονόμηση Z")
 #define MSG_DELTA_CALIBRATE_CENTER          _UxGT("Βαθμονόμηση κέντρου")
+
+#define MSG_EXPECTED_PRINTER                _UxGT("Εσφαλμένος εκτυπωτής")

Marlin/src/lcd/language/language_en.h

@@ -1164,6 +1164,11 @@
 #ifndef MSG_CASE_LIGHT_BRIGHTNESS
   #define MSG_CASE_LIGHT_BRIGHTNESS           _UxGT("Light Brightness")
 #endif
+
+#ifndef MSG_EXPECTED_PRINTER
+  #define MSG_EXPECTED_PRINTER                 _UxGT("INCORRECT PRINTER")
+#endif
+
 #if LCD_WIDTH >= 20
   #ifndef MSG_INFO_PRINT_COUNT
     #define MSG_INFO_PRINT_COUNT              _UxGT("Print Count")

Marlin/src/lcd/language/language_es.h

@@ -204,6 +204,8 @@
 #define MSG_INFO_PROTOCOL                   _UxGT("Protocolo")
 #define MSG_CASE_LIGHT                      _UxGT("Luz cabina")
 
+#define MSG_EXPECTED_PRINTER                _UxGT("Impresora incorrecta")
+
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Conteo de impresión")
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Completadas")

Marlin/src/lcd/language/language_eu.h

@@ -354,6 +354,9 @@
 #define MSG_ERR_HOMING_FAILED               _UxGT("Hasi. huts egin du")
 #define MSG_ERR_PROBING_FAILED              _UxGT("Neurketak huts egin du")
 #define MSG_M600_TOO_COLD                   _UxGT("M600: hotzegi")
+
+#define MSG_EXPECTED_PRINTER                _UxGT("Inprimagailu okerra")
+
 //
 // Filament Change screens show up to 3 lines on a 4-line display
 //                        ...or up to 2 lines on a 3-line display

Marlin/src/lcd/language/language_fi.h

@@ -168,3 +168,5 @@
 #define MSG_DELTA_CALIBRATE_Y               _UxGT("Kalibroi Y")
 #define MSG_DELTA_CALIBRATE_Z               _UxGT("Kalibroi Z")
 #define MSG_DELTA_CALIBRATE_CENTER          _UxGT("Kalibroi Center")
+
+#define MSG_EXPECTED_PRINTER                _UxGT("Väärä tulostin")

Marlin/src/lcd/language/language_fr.h

@@ -409,6 +409,8 @@
 #define MSG_CASE_LIGHT                      _UxGT("Lumière caisson")
 #define MSG_CASE_LIGHT_BRIGHTNESS           _UxGT("Luminosité")
 
+#define MSG_EXPECTED_PRINTER                _UxGT("Imprimante incorrecte")
+
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Nbre impressions")
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Terminées")

Marlin/src/lcd/language/language_gl.h

@@ -225,6 +225,8 @@
 
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Segue traballo")
 
+#define MSG_EXPECTED_PRINTER                _UxGT("Impresora incorrecta")
+
 #if LCD_HEIGHT >= 4
   // Up to 3 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Agarde para")

Marlin/src/lcd/language/language_hr.h

@@ -204,6 +204,8 @@
 #define MSG_INFO_PROTOCOL                   _UxGT("Protokol")
 #define MSG_CASE_LIGHT                      _UxGT("Osvjetljenje")
 
+#define MSG_EXPECTED_PRINTER                _UxGT("Neispravan pisač")
+
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Broj printova")
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Završeni")

Marlin/src/lcd/language/language_it.h

@@ -494,6 +494,8 @@
 #define MSG_SNAKE                           _UxGT("Sn4k3")
 #define MSG_MAZE                            _UxGT("Maze")
 
+#define MSG_EXPECTED_PRINTER                _UxGT("Stampante errata")
+
 //
 // Le schermate di Cambio Filamento possono visualizzare fino a 3 linee su un display a 4 righe
 //                                                  ...o fino a 2 linee su un display a 3 righe.

Marlin/src/lcd/language/language_jp-kana.h

@@ -219,3 +219,5 @@
 #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("シバラクオマチクダサイ")            // "filament load"
 #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("プリントヲサイカイシマス")           // "Wait for print"
 #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("シバラクオマチクダサイ")            // "to resume"
+
+#define MSG_EXPECTED_PRINTER                _UxGT("間違ったプリンター")               // "Wrong printer"

Marlin/src/lcd/language/language_ko_KR.h

@@ -346,6 +346,9 @@
 //#define MSG_INFO_PROTOCOL                 _UxGT("Protocol")
 //#define MSG_CASE_LIGHT                    _UxGT("Case light")
 //#define MSG_CASE_LIGHT_BRIGHTNESS         _UxGT("Light Brightness")
+
+#define MSG_EXPECTED_PRINTER                _UxGT("잘못된 프린터")
+
 #if LCD_WIDTH >= 20
   //#define MSG_INFO_PRINT_COUNT            _UxGT("Print Count")
   //#define MSG_INFO_COMPLETED_PRINTS       _UxGT("Completed")

Marlin/src/lcd/language/language_nl.h

@@ -216,6 +216,8 @@
 #define MSG_INFO_PROTOCOL                   _UxGT("Protocol")
 #define MSG_CASE_LIGHT                      _UxGT("Case licht")
 
+#define MSG_EXPECTED_PRINTER                _UxGT("Onjuiste printer")
+
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Printed Aantal")
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Totaal Voltooid")

Marlin/src/lcd/language/language_pl.h

@@ -204,6 +204,8 @@
 #define MSG_INFO_PROTOCOL                   _UxGT("Protokół")
 #define MSG_CASE_LIGHT                      _UxGT("Oświetlenie")
 
+#define MSG_EXPECTED_PRINTER                _UxGT("Niepoprawna drukarka")
+
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Wydrukowano")
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Ukończono")

Marlin/src/lcd/language/language_pt-br.h

@@ -366,6 +366,8 @@
 #define MSG_CASE_LIGHT                      _UxGT("Luz da Impressora")
 #define MSG_CASE_LIGHT_BRIGHTNESS           _UxGT("Intensidade Brilho")
 
+#define MSG_EXPECTED_PRINTER                _UxGT("Impressora Incorreta")
+
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Total de Impressões")
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Realizadas")

Marlin/src/lcd/language/language_pt.h

@@ -185,3 +185,5 @@
 #define MSG_DELTA_CALIBRATE_CENTER          _UxGT("Calibrar Centro")
 
 #define MSG_LCD_ENDSTOPS                    _UxGT("Fim de curso")
+
+#define MSG_EXPECTED_PRINTER                _UxGT("Impressora Incorreta")

Marlin/src/lcd/language/language_ru.h

@@ -372,6 +372,9 @@
 #define MSG_INFO_PROTOCOL                   _UxGT("Протокол")
 #define MSG_CASE_LIGHT                      _UxGT("Подсветка корпуса")
 #define MSG_CASE_LIGHT_BRIGHTNESS           _UxGT("Яркость подсветки")
+
+#define MSG_EXPECTED_PRINTER                _UxGT("Неверный принтер")
+
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Счётчик печати")
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Закончено")

Marlin/src/lcd/language/language_sk.h

@@ -415,6 +415,8 @@
 #define MSG_CASE_LIGHT                      _UxGT("Osvetlenie")
 #define MSG_CASE_LIGHT_BRIGHTNESS           _UxGT("Jas svetla")
 
+#define MSG_EXPECTED_PRINTER                _UxGT("Nesprávna tlačiareň")
+
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Počet tlačí")
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Dokončené")

Marlin/src/lcd/language/language_tr.h

@@ -362,6 +362,9 @@
 #define MSG_INFO_PROTOCOL                   _UxGT("Protokol")
 #define MSG_CASE_LIGHT                      _UxGT("Aydınlatmayı Aç")
 #define MSG_CASE_LIGHT_BRIGHTNESS           _UxGT("Aydınlatma Parlaklğı")
+
+#define MSG_EXPECTED_PRINTER                _UxGT("Yanlış Yazıcı")
+
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Baskı Sayısı")
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Tamamlanan")

Marlin/src/lcd/language/language_uk.h

@@ -192,6 +192,8 @@
 #define MSG_INFO_PROTOCOL                   _UxGT("Протокол")
 #define MSG_CASE_LIGHT                      _UxGT("Підсвітка")
 
+#define MSG_EXPECTED_PRINTER                _UxGT("Неправильний принтер")
+
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("К-сть друків")
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Завершено")

Marlin/src/lcd/language/language_zh_CN.h

@@ -323,6 +323,8 @@
 #define MSG_CASE_LIGHT                      _UxGT("外壳灯") // "Case light"
 #define MSG_CASE_LIGHT_BRIGHTNESS           _UxGT("灯亮度") // "Light BRIGHTNESS"
 
+#define MSG_EXPECTED_PRINTER                _UxGT("打印机不正确") // "The printer is incorrect"
+
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("打印计数")  //"Print Count"
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("完成了")  //"Completed"

Marlin/src/lcd/language/language_zh_TW.h

@@ -323,6 +323,8 @@
 #define MSG_CASE_LIGHT                      _UxGT("外殼燈") // "Case light"
 #define MSG_CASE_LIGHT_BRIGHTNESS           _UxGT("燈亮度") // "Light BRIGHTNESS"
 
+#define MSG_EXPECTED_PRINTER                _UxGT("打印機不正確") // "The printer is incorrect"
+
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("列印計數")  //"Print Count"
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("已完成")  //"Completed"

config/default/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Alfawise/U20/Configuration_adv.h

@@ -2244,6 +2244,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -2244,6 +2244,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Anet/A2/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Anet/A2plus/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Anet/A6/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Anet/A8/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Anet/A8plus/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Anet/E16/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/ArmEd/Configuration_adv.h

@@ -2246,6 +2246,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -2250,6 +2250,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Cartesio/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Creality/CR-10/Configuration_adv.h

@@ -2245,6 +2245,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Creality/CR-10S/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Creality/CR-10_5S/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Creality/CR-20 Pro/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Creality/CR-20/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Creality/CR-8/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Creality/Ender-3/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Creality/Ender-4/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Creality/Ender-5/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Dagoma/Disco Ultimate/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Einstart-S/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/FYSETC/AIO_II/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h

@@ -2241,6 +2241,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h

@@ -2241,6 +2241,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/FYSETC/Cheetah/base/Configuration_adv.h

@@ -2241,6 +2241,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/FYSETC/F6_13/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Felix/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -2241,6 +2241,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Formbot/Raptor/Configuration_adv.h

@@ -2244,6 +2244,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -2246,6 +2246,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -2246,6 +2246,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Geeetech/A10/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Geeetech/A10M/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Geeetech/A20M/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -2241,6 +2241,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 //#define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/JGAurora/A1/Configuration_adv.h

@@ -2247,6 +2247,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/JGAurora/A5/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/JGAurora/A5S/Configuration_adv.h

@@ -2247,6 +2247,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/MakerParts/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Malyan/M150/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Malyan/M200/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Mks/Robin/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Mks/Sbase/Configuration_adv.h

@@ -2243,6 +2243,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/RapideLite/RL200/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/RigidBot/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/SCARA/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Sanguinololu/Configuration_adv.h

@@ -2242,6 +2242,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Tevo/Michelangelo/Configuration_adv.h

@@ -2241,6 +2241,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */

config/examples/Tevo/Tarantula Pro/Configuration_adv.h

@@ -2238,6 +2238,13 @@
  */
 #define EXTENDED_CAPABILITIES_REPORT
 
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
 /**
  * Disable all Volumetric extrusion options
  */