microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Fix up M421 and some comments

Browse Source
2.0.x
Scott Lahteine 8 years ago
parent 4ec4ecff1a
commit 091f94a6bf
1 changed files with 42 additions and 72 deletions
Show Stats Download Patch File Download Diff File

106
Marlin/Marlin_main.cpp
Unescape Escape View File

@ -170,6 +170,8 @@
* M302 - Allow cold extrudes, or set the minimum extrude S<temperature>. (Requires PREVENT_COLD_EXTRUSION)
* M303 - PID relay autotune S<temperature> sets the target temperature. Default 150C. (Requires PIDTEMP)
* M304 - Set bed PID parameters P I and D. (Requires PIDTEMPBED)
* M350 - Set microstepping mode. (Requires digital microstepping pins.)
* M351 - Toggle MS1 MS2 pins directly. (Requires digital microstepping pins.)
* M355 - Turn the Case Light on/off and set its brightness. (Requires CASE_LIGHT_PIN)
* M380 - Activate solenoid on active extruder. (Requires EXT_SOLENOID)
* M381 - Disable all solenoids. (Requires EXT_SOLENOID)
@ -194,6 +196,7 @@
* M666 - Set delta endstop adjustment. (Requires DELTA)
* M605 - Set dual x-carriage movement mode: "M605 S<mode> [X<x_offset>] [R<temp_offset>]". (Requires DUAL_X_CARRIAGE)
* M851 - Set Z probe's Z offset in current units. (Negative = below the nozzle.)
* M900 - Get and/or Set advance K factor and WH/D ratio. (Requires LIN_ADVANCE)
* M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. (Requires HAVE_TMC2130)
* M907 - Set digital trimpot motor current using axis codes. (Requires a board with digital trimpots)
* M908 - Control digital trimpot directly. (Requires DAC_STEPPER_CURRENT or DIGIPOTSS_PIN)
@ -203,8 +206,6 @@
* M912 - Clear stepper driver overtemperature pre-warn condition flag. (Requires HAVE_TMC2130)
* M913 - Set HYBRID_THRESHOLD speed. (Requires HYBRID_THRESHOLD)
* M914 - Set SENSORLESS_HOMING sensitivity. (Requires SENSORLESS_HOMING)
* M350 - Set microstepping mode. (Requires digital microstepping pins.)
* M351 - Toggle MS1 MS2 pins directly. (Requires digital microstepping pins.)
*
* M360 - SCARA calibration: Move to cal-position ThetaA (0 deg calibration)
* M361 - SCARA calibration: Move to cal-position ThetaB (90 deg calibration - steps per degree)
@ -7141,7 +7142,7 @@ inline void gcode_M82() { axis_relative_modes[E_AXIS] = false; }
inline void gcode_M83() { axis_relative_modes[E_AXIS] = true; }
/**
* M18, M84: Disable all stepper motors
* M18, M84: Disable stepper motors
*/
inline void gcode_M18_M84() {
if (code_seen('S')) {
@ -8166,7 +8167,7 @@ inline void gcode_M303() {
}
/**
* M364: SCARA calibration: Move to cal-position PSIC (90 deg to Theta calibration position)
* M364: SCARA calibration: Move to cal-position PsiC (90 deg to Theta calibration position)
*/
inline bool gcode_M364() {
SERIAL_ECHOLNPGM(" Cal: Theta-Psi 90");
@ -8409,39 +8410,33 @@ void quickstop_stepper() {
#endif
#if ENABLED(MESH_BED_LEVELING)
/**
* M421: Set a single Mesh Bed Leveling Z coordinate
* Use either 'M421 X<linear> Y<linear> Z<linear>' or 'M421 I<xindex> J<yindex> Z<linear>'
*
* Usage:
* M421 X<linear> Y<linear> Z<linear>
* M421 X<linear> Y<linear> Q<offset>
* M421 I<xindex> J<yindex> Z<linear>
* M421 I<xindex> J<yindex> Q<offset>
*/
inline void gcode_M421() {
const bool hasX = code_seen('X'), hasI = code_seen('I');
const int8_t ix = hasI ? code_value_byte() : hasX ? mbl.probe_index_x(RAW_X_POSITION(code_value_linear_units())) : -1;
const bool hasY = code_seen('Y'), hasJ = code_seen('J');
const int8_t iy = hasJ ? code_value_byte() : hasY ? mbl.probe_index_y(RAW_Y_POSITION(code_value_linear_units())) : -1;
const bool hasZ = code_seen('Z'), hasQ = code_seen('Q');
const bool hasX = code_seen('X'), hasI = !hasX && code_seen('I');
const int8_t px = hasX || hasI ? mbl.probe_index_x(code_value_linear_units()) : 0;
const bool hasY = code_seen('Y'), hasJ = !hasY && code_seen('J');
const int8_t py = hasY || hasJ ? mbl.probe_index_y(code_value_linear_units()) : 0;
const bool hasZ = code_seen('Z');
const float z = hasZ ? code_value_linear_units() : 0;
if (hasX && hasY && hasZ) {
if (px >= 0 && py >= 0)
mbl.set_z(px, py, z);
else {
if (int(hasI && hasJ) + int(hasX && hasY) != 1 || hasZ == hasQ) {
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM(MSG_ERR_MESH_XY);
}
SERIAL_ERRORLNPGM(MSG_ERR_M421_PARAMETERS);
}
else if (hasI && hasJ && hasZ) {
if (WITHIN(px, 0, GRID_MAX_POINTS_X - 1) && WITHIN(py, 0, GRID_MAX_POINTS_Y - 1))
mbl.set_z(px, py, z);
else {
else if (ix < 0 || iy < 0) {
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM(MSG_ERR_MESH_XY);
}
}
else {
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM(MSG_ERR_M421_PARAMETERS);
}
else
mbl.set_z(ix, iy, code_value_linear_units() + (hasQ ? mbl.z_values[ix][iy] : 0));
}
#elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
@ -8454,39 +8449,27 @@ void quickstop_stepper() {
* M421 I<xindex> J<yindex> Q<offset>
*/
inline void gcode_M421() {
const bool hasI = code_seen('I');
const int8_t px = hasI ? code_value_int() : 0;
const int8_t ix = hasI ? code_value_byte() : -1;
const bool hasJ = code_seen('J');
const int8_t py = hasJ ? code_value_int() : 0;
const bool hasZ = code_seen('Z'), hasQ = !hasZ && code_seen('Q');
const float z = hasZ || hasQ ? code_value_linear_units() : 0;
const int8_t iy = hasJ ? code_value_byte() : -1;
const bool hasZ = code_seen('Z'), hasQ = code_seen('Q');
if (!hasI || !hasJ || (hasQ && hasZ) || (!hasQ && !hasZ)) {
if (!hasI || !hasJ || hasZ == hasQ) {
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM(MSG_ERR_M421_PARAMETERS);
return;
}
if (WITHIN(px, 0, GRID_MAX_POINTS_X - 1) && WITHIN(py, 0, GRID_MAX_POINTS_Y - 1)) {
if (hasZ) { // doing an absolute mesh value
z_values[px][py] = z;
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
bed_level_virt_interpolate();
#endif
else if (!WITHIN(ix, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(iy, 0, GRID_MAX_POINTS_Y - 1)) {
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM(MSG_ERR_MESH_XY);
}
else { // doing an offset of a mesh value
z_values[px][py] += z;
else {
z_values[ix][iy] = code_value_linear_units() + (hasQ ? z_values[ix][iy] : 0);
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
bed_level_virt_interpolate();
#endif
}
}
else { // bad indexes were specified for the mesh point
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM(MSG_ERR_MESH_XY);
}
}
#elif ENABLED(AUTO_BED_LEVELING_UBL)
@ -8499,37 +8482,24 @@ void quickstop_stepper() {
* M421 C Z<linear>
* M421 C Q<offset>
*/
inline void gcode_M421() {
// Get the closest position for 'C', if needed
const mesh_index_pair location = find_closest_mesh_point_of_type(REAL, current_position[X_AXIS], current_position[Y_AXIS], USE_NOZZLE_AS_REFERENCE, NULL, false);
const bool hasC = code_seen('C'), hasI = code_seen('I');
const int8_t px = hasC ? location.x_index : hasI ? code_value_int() : 0;
const int8_t ix = hasI ? code_value_byte() : hasC ? location.x_index : -1;
const bool hasJ = code_seen('J');
const int8_t py = hasC ? location.y_index : hasJ ? code_value_int() : 0;
const int8_t iy = hasJ ? code_value_byte() : hasC ? location.y_index : -1;
const bool hasZ = code_seen('Z'), hasQ = code_seen('Q');
const bool hasZ = code_seen('Z'), hasQ = !hasZ && code_seen('Q');
const float z = hasZ || hasQ ? code_value_linear_units() : 0;
if ( ((hasI && hasJ) == hasC) || (hasQ && hasZ) || (!hasQ && !hasZ)) {
if (int(hasC) + int(hasI && hasJ) != 1 || hasZ == hasQ) {
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM(MSG_ERR_M421_PARAMETERS);
return;
}
if (WITHIN(px, 0, GRID_MAX_POINTS_X - 1) && WITHIN(py, 0, GRID_MAX_POINTS_Y - 1)) {
if (hasZ) // doing an absolute mesh value
ubl.z_values[px][py] = z;
else // doing an offset of a mesh value
ubl.z_values[px][py] += z;
}
else { // bad indexes were specified for the mesh point
else if (!WITHIN(ix, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(iy, 0, GRID_MAX_POINTS_Y - 1)) {
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM(MSG_ERR_MESH_XY);
}
else
ubl.z_values[ix][iy] = code_value_linear_units() + (hasQ ? ubl.z_values[ix][iy] : 0);
}
#endif // AUTO_BED_LEVELING_UBL

Write Preview
Loading…
Cancel
Save