Wrangle encoder bits, LCD_CLICKED

Marlin/pins_RAMBO.h

@@ -150,15 +150,6 @@
     #define LCD_PINS_D6 27
     #define LCD_PINS_D7 29
 
-    //bits in the shift register that carry the buttons for:
-    // left up center down right red
-    #define BL_LE 7
-    #define BL_UP 6
-    #define BL_MI 5
-    #define BL_DW 4
-    #define BL_RI 3
-    #define BL_ST 2
-
   #endif // !NEWPANEL
 
 #endif // ULTRA_LCD

Marlin/ultralcd.h

@@ -58,7 +58,6 @@
     void bootscreen();
   #endif
 
-
   #define LCD_MESSAGEPGM(x) lcd_setstatuspgm(PSTR(x))
   #define LCD_ALERTMESSAGEPGM(x) lcd_setalertstatuspgm(PSTR(x))
 
@@ -93,7 +92,20 @@
 
   bool lcd_blink();
 
-  #if ENABLED(REPRAPWORLD_KEYPAD)
+  #if ENABLED(ULTIPANEL)
+    #define BLEN_A 0
+    #define BLEN_B 1
+    // Encoder click is directly connected
+    #if BUTTON_EXISTS(ENC)
+      #define BLEN_C 2
+      #define EN_C (_BV(BLEN_C))
+    #endif
+    #define EN_A (_BV(BLEN_A))
+    #define EN_B (_BV(BLEN_B))
+    #define EN_C (_BV(BLEN_C))
+  #endif
+
+  #if ENABLED(REPRAPWORLD_KEYPAD) // is also ULTIPANEL and NEWPANEL
 
     #define REPRAPWORLD_BTN_OFFSET 0 // bit offset into buttons for shift register values
 
@@ -135,35 +147,10 @@
                                               EN_REPRAPWORLD_KEYPAD_LEFT) \
                                             )
 
-  #endif // REPRAPWORLD_KEYPAD
+    #define LCD_CLICKED ((buttons & EN_C) || (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_F1))
-
+  #elif ENABLED(NEWPANEL)
-  #if ENABLED(NEWPANEL)
+    #define LCD_CLICKED (buttons & EN_C)
-
+  #endif
-    #define EN_C (_BV(BLEN_C))
-    #define EN_B (_BV(BLEN_B))
-    #define EN_A (_BV(BLEN_A))
-
-    #if ENABLED(REPRAPWORLD_KEYPAD)
-      #define LCD_CLICKED ((buttons&EN_C) || (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_F1))
-    #else
-      #define LCD_CLICKED (buttons&EN_C)
-    #endif
-
-  #else //!NEWPANEL
-
-    //atomic, do not change
-    #define B_LE (_BV(BL_LE))
-    #define B_UP (_BV(BL_UP))
-    #define B_MI (_BV(BL_MI))
-    #define B_DW (_BV(BL_DW))
-    #define B_RI (_BV(BL_RI))
-    #define B_ST (_BV(BL_ST))
-    #define EN_B (_BV(BLEN_B))
-    #define EN_A (_BV(BLEN_A))
-
-    #define LCD_CLICKED ((buttons&B_MI)||(buttons&B_ST))
-
-  #endif //!NEWPANEL
 
 #else //no LCD
   FORCE_INLINE void lcd_update() {}

Marlin/ultralcd_impl_DOGM.h

@@ -42,20 +42,9 @@
  * Implementation of the LCD display routines for a DOGM128 graphic display.
  * These are common LCD 128x64 pixel graphic displays.
  */
-
-#if ENABLED(ULTIPANEL)
-  #define BLEN_A 0
-  #define BLEN_B 1
-  #define BLEN_C 2
-  #define EN_A (_BV(BLEN_A))
-  #define EN_B (_BV(BLEN_B))
-  #define EN_C (_BV(BLEN_C))
-  #define LCD_CLICKED (buttons&EN_C)
-#endif
-
-#include "dogm_bitmaps.h"
 #include "ultralcd.h"
 #include "ultralcd_st7920_u8glib_rrd.h"
+#include "dogm_bitmaps.h"
 #include "duration_t.h"
 
 #include <U8glib.h>

Marlin/ultralcd_impl_HD44780.h

@@ -39,18 +39,6 @@ extern volatile uint8_t buttons;  //an extended version of the last checked butt
 // via a shift/i2c register.
 
 #if ENABLED(ULTIPANEL)
-  // All UltiPanels might have an encoder - so this is always be mapped onto first two bits
-  #define BLEN_B 1
-  #define BLEN_A 0
-
-  #define EN_B (_BV(BLEN_B)) // The two encoder pins are connected through BTN_EN1 and BTN_EN2
-  #define EN_A (_BV(BLEN_A))
-
-  #if BUTTON_EXISTS(ENC)
-    // encoder click is directly connected
-    #define BLEN_C 2
-    #define EN_C (_BV(BLEN_C))
-  #endif
 
   //
   // Setup other button mappings of each panel
@@ -80,51 +68,35 @@ extern volatile uint8_t buttons;  //an extended version of the last checked butt
 
   #elif ENABLED(LCD_I2C_PANELOLU2)
 
-    #if BUTTON_EXISTS(ENC)
+    #if !BUTTON_EXISTS(ENC) // Use I2C if not directly connected to a pin
-
-      #undef LCD_CLICKED
-      #define LCD_CLICKED (buttons&EN_C)
-
-    #else // Read through I2C if not directly connected to a pin
 
       #define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
 
       #define B_MI (PANELOLU2_ENCODER_C<<B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later
 
       #undef LCD_CLICKED
-      #define LCD_CLICKED (buttons&B_MI)
+      #define LCD_CLICKED (buttons & B_MI)
 
       // I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
       #define LCD_HAS_SLOW_BUTTONS
 
     #endif
 
-  #elif ENABLED(REPRAPWORLD_KEYPAD)
+  #elif DISABLED(NEWPANEL) // old style ULTIPANEL
-
+    // Shift register bits correspond to buttons:
-    // REPRAPWORLD_KEYPAD defined in ultralcd.h
+    #define BL_LE 7   // Left
-
+    #define BL_UP 6   // Up
-  #elif ENABLED(NEWPANEL)
+    #define BL_MI 5   // Middle
-    #define LCD_CLICKED (buttons&EN_C)
+    #define BL_DW 4   // Down
-
+    #define BL_RI 3   // Right
-  #else // old style ULTIPANEL
+    #define BL_ST 2   // Red Button
-    //bits in the shift register that carry the buttons for:
-    // left up center down right red(stop)
-    #define BL_LE 7
-    #define BL_UP 6
-    #define BL_MI 5
-    #define BL_DW 4
-    #define BL_RI 3
-    #define BL_ST 2
-
-    //automatic, do not change
     #define B_LE (_BV(BL_LE))
     #define B_UP (_BV(BL_UP))
     #define B_MI (_BV(BL_MI))
     #define B_DW (_BV(BL_DW))
     #define B_RI (_BV(BL_RI))
     #define B_ST (_BV(BL_ST))
-
+    #define LCD_CLICKED ((buttons & B_MI) || (buttons & B_ST))
-    #define LCD_CLICKED (buttons&(B_MI|B_ST))
   #endif
 
 #endif //ULTIPANEL