Tabule/SW/minuty/minuty.ino

/*
Současné ovladače
5587904 5587760
5587952 5587724
5587916 5587772

1377728 1377584
1377776 1377548
1377740 1377596
1377788 1377539
*/

#include <Tasker.h>
#include <RCSwitch.h>

int stav = 0; // 1=nastaveni, 2=readytostart, 3=polocas1, 4=pauza, 5=polocas2, 6=konec
int minuta, delka = 45, vynulovani;
boolean debug = 0, i;

Tasker tasker;
RCSwitch mySwitch = RCSwitch();

void change() {
  if (stav > 1) {
    vynulovani++;
    if (vynulovani >= 30) {
      vynulovani = 0;
      stav = 1;
      tasker.cancel(polocas);
      tasker.cancel(blinking, 0);
      tasker.cancel(blinking, delka);
      tasker.cancel(blinking, 2*delka);
      minuta = 0;
    }
  } else {
    if (delka == 45) {
      delka = 35;
      display(delka);
    } else if (delka == 35) {
      delka = 30;
      display(delka);
    } else if (delka == 30) {
      delka = 45;
      display(delka);
    }
    delay(500);
  }
}

void enter() {
  if (stav == 1) {
    stav = 2; // Ready to start
    tasker.setInterval(blinking, 500, 0);
    blinking(0);
    delay(3000);
  } else if (stav == 2) {
    tasker.cancel(blinking, 0);
    stav = 3; // Poločas 1
    display(0);
    tasker.setInterval(polocas, 60000);
  } else if (stav == 4) {
    tasker.cancel(blinking, minuta);
    stav = 5; //Poločas 2
    display(minuta);
    tasker.setInterval(polocas, 60000);
  }
}

void minutym(){
  if((stav == 3 && minuta > 0) || (stav == 5 && minuta > delka)){
    minuta--;
    display(minuta);
    delay(500);
  }
}

void minutyp(){
  if((stav == 3 && minuta < delka) || (stav == 5 && minuta < 2*delka)){
    minuta++;
    display(minuta);
    delay(500);
  }
}

void polocas() {
  minuta++;
  display(minuta);
  if (minuta == delka && stav == 3) {
    stav = 4;
    tasker.cancel(polocas);
    tasker.setInterval(blinking, 500, minuta);
  }else if(minuta == 2*delka && stav == 5){
    stav = 6;
    tasker.cancel(polocas);
    tasker.setInterval(blinking, 500, minuta);
  }
}

void setup() {
  if(debug){ Serial.begin(9600); }
  mySwitch.enableReceive(0);  // Receiver on interrupt 0 => that is pin #2
  pinMode(9, OUTPUT);
  pinMode(10, OUTPUT);
  pinMode(11, OUTPUT);
  pinMode(12, OUTPUT);
  pinMode(13, OUTPUT);
  pinMode(A0, OUTPUT);
  pinMode(A1, OUTPUT);
  pinMode(A2, OUTPUT);

  //Test zobrazení
  display(88);
  if(!debug){ delay(60000); } //88 na začátku

  //tasker.setInterval(display, 500);
  stav = 1;
  display(delka);
}

void loop() {
  tasker.loop();
  if (mySwitch.available()) {

    long value = mySwitch.getReceivedValue();

    if (value == 5587916 || value == 1377740) {
      change();
    } else if (value == 5587772 || value == 1377596) {
      enter();
    } else if (value == 5587952 || value == 1377776) {
      minutym();
    } else if (value == 5587724 || value == 1377548) {
      minutyp();
    }

    mySwitch.resetAvailable();
  }
}

void blinking(int dig) {
  if(!i){
    digitalWrite(12, 1);
    digitalWrite(10, 1);
    digitalWrite(9, 1);
    digitalWrite(11, 1);
  
    digitalWrite(A1, 1);
    digitalWrite(13, 1);
    digitalWrite(A0, 1);
    digitalWrite(A2, 1);
    if(debug){ Serial.println("blank"); }
    i=1;
  }else{
    display(dig);
    i=0;
  }
}

void display(int dig) {
  boolean minuta1[4], minuta2[4];
  int_to_bin_digit(dig / 10, minuta1);
  int_to_bin_digit(dig % 10, minuta2);
  digitalWrite(12, minuta1[3]);
  digitalWrite(10, minuta1[2]);
  digitalWrite(9, minuta1[1]);
  digitalWrite(11, minuta1[0]);

  digitalWrite(A1, minuta2[0]);
  digitalWrite(13, minuta2[1]);
  digitalWrite(A0, minuta2[2]);
  digitalWrite(A2, minuta2[3]);
  if(debug){ Serial.println(dig); }
}

void int_to_bin_digit(unsigned int in, boolean* out)
{
  /* assert: count <= sizeof(int)*CHAR_BIT */
  unsigned int mask = 1U << 3;
  int i;
  for (i = 0; i < 4; i++) {
    out[i] = (in & mask) ? 1 : 0;
    in <<= 1;
  }
}