scube

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

History

etagle d8a4db72ac Reimplemented SW SPI for DUE in assembler. This allows to reach 12Mhz as SPI Clock and improves 4x the transfer speed to the SD card. This is REQUIRED so access to SD from USB is usable (allows 600Kbytes/second transfer speeds)		7 years ago
..
lib	Module updates	7 years ago
src	Reimplemented SW SPI for DUE in assembler. This allows to reach 12Mhz as SPI Clock and improves 4x the transfer speed to the SD card. This is REQUIRED so access to SD from USB is usable (allows 600Kbytes/second transfer speeds)	7 years ago
Configuration.h	[2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller (#8814 )	7 years ago
Configuration_adv.h	A single setting to validate filament width	7 years ago
Marlin.ino	[2.0.x] TMC driver update (#8769 )	7 years ago
README.h	Add a README.h file for Arduino IDE users	7 years ago

README.h

/*
================================================================================

  Marlin Firmware

  (c) 2011-2017 MarlinFirmware
  Portions of Marlin are (c) by their respective authors.
  All code complies with GPLv2 and/or GPLv3

================================================================================

Greetings! Thank you for choosing Marlin 2 as your 3D printer firmware.

To configure Marlin you must edit Configuration.h and Configuration_adv.h
located in the root 'Marlin' folder. Check the config/examples folder to see if
there's a more suitable starting-point for your specific hardware.

Before diving in, we recommend the following essential links:

Marlin Firmware Official Website

  - http://marlinfw.org/
    The official Marlin Firmware website contains the most up-to-date
    documentation. Contributions are always welcome!

Configuration

  - https://www.youtube.com/watch?v=3gwWVFtdg-4
    A good 20-minute overview of Marlin configuration by Tom Sanladerer.
    (Applies to Marlin 1.0.x, so Jerk and Acceleration should be halved.)
    Also... https://www.google.com/search?tbs=vid%3A1&q=configure+marlin

  - http://marlinfw.org/docs/configuration/configuration.html
    Marlin's configuration options are explained in more detail here.

Getting Help

  - http://forums.reprap.org/list.php?415
    The Marlin Discussion Forum is a great place to get help from other Marlin
    users who may have experienced similar issues to your own.

  - https://github.com/MarlinFirmware/Marlin/issues
    With a free GitHub account you can provide us with feedback, bug reports,
    and feature requests via the Marlin Issue Queue.

Contributing

  - http://marlinfw.org/docs/development/contributing.html
    If you'd like to contribute to Marlin, read this first!

  - http://marlinfw.org/docs/development/coding_standards.html
    Before submitting code get to know the Coding Standards.
*/