You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
164 lines
5.0 KiB
C
164 lines
5.0 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Rev C 2 JUN 2017
|
|
*
|
|
* Converted to Arduino pin numbering
|
|
*/
|
|
|
|
/**
|
|
* There are two Arduino IDE extensions that are compatible with this board
|
|
* and with the mainstream Marlin software. All have been used with Arduino 1.6.12
|
|
*
|
|
* Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
|
|
* Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu
|
|
*
|
|
* Installation instructions are at the above URL. Don't bother loading the
|
|
* libraries - they are not used with the Marlin software.
|
|
*
|
|
* Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support
|
|
* This is basically Teensyduino but with a bootloader that can handle image sizes
|
|
* larger than 64K.
|
|
*
|
|
* Installation:
|
|
*
|
|
* 1. Go to the above URL, click on the "Clone or Download" button and then
|
|
* click on "Download ZIP" button.
|
|
* 2. Unzip the file, find the "printrboard" directory and then copy it to the
|
|
* hardware directory in Arduino. The Arduino hardware directory will probably
|
|
* be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
|
|
* 3. Restart Arduino.
|
|
* 4. Select "Printrboard" from the 'Tools > Board' menu.
|
|
*
|
|
* Teensyduino is the most popular option. Printrboard is used if your board doesn't have
|
|
* the Teensyduino bootloader on it.
|
|
*/
|
|
|
|
/**
|
|
* To burn the bootloader that comes with Printrboard:
|
|
*
|
|
* 1. Connect your programmer to the board.
|
|
* 2. In the Arduino IDE select "Printrboard" and then select the programmer.
|
|
* 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
|
|
* 4. The programmer is no longer needed. Remove it.
|
|
*/
|
|
|
|
/**
|
|
* SILKSCREEN ERROR
|
|
*
|
|
* The silkscreen for the endstops do NOT match the schematic. The silkscreen SHOULD
|
|
* read (from left to right) X-STOP, Y-STOP, Z-STOP & E-STOP. The silkscreen actually
|
|
* reads E-STOP, X-STOP, Y-STOP & Z-STOP.
|
|
*
|
|
* The pin assignments in this file match the silkscreen.
|
|
*/
|
|
|
|
#if !defined(__AVR_AT90USB1286__) && !defined(__AVR_AT90USB1286P__)
|
|
#error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'"
|
|
#endif
|
|
|
|
#define BOARD_NAME "Teensylu"
|
|
|
|
//
|
|
// Limit Switch definitions that match the SCHEMATIC
|
|
//
|
|
//#define X_STOP_PIN 25 // B5
|
|
//#define Y_STOP_PIN 26 // B6
|
|
//#define Z_STOP_PIN 27 // B7
|
|
//#define E_STOP_PIN 36 // E4
|
|
|
|
|
|
//
|
|
// Limit Switch definitions that match the SILKSCREEN
|
|
//
|
|
#define X_STOP_PIN 26 // B6
|
|
#define Y_STOP_PIN 27 // B7
|
|
#define Z_STOP_PIN 36 // E4
|
|
//#define E_STOP_PIN 25 // B5
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_STEP_PIN 28 // A0
|
|
#define X_DIR_PIN 29 // A1
|
|
#define X_ENABLE_PIN 19 // E7
|
|
|
|
#define Y_STEP_PIN 30 // A2
|
|
#define Y_DIR_PIN 31 // A3
|
|
#define Y_ENABLE_PIN 18 // E6
|
|
|
|
#define Z_STEP_PIN 32 // A4
|
|
#define Z_DIR_PIN 33 // A5
|
|
#define Z_ENABLE_PIN 17 // C7
|
|
|
|
#define E0_STEP_PIN 34 // A6
|
|
#define E0_DIR_PIN 35 // A7
|
|
#define E0_ENABLE_PIN 13 // C3
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#define TEMP_0_PIN 7 // Analog Input (Extruder)
|
|
#define TEMP_BED_PIN 6 // Analog Input (Bed)
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#define HEATER_0_PIN 15 // C5 PWM3B - Extruder
|
|
#define HEATER_BED_PIN 14 // C4 PWM3C
|
|
|
|
#ifndef FAN_PIN
|
|
#define FAN_PIN 16 // C6 PWM3A
|
|
#endif
|
|
|
|
//
|
|
// Misc. Functions
|
|
//
|
|
#define SDSS 20 // B0 JP31-6
|
|
#define CASE_LIGHT_PIN 0 // D0 IO-14 PWM0B
|
|
|
|
//
|
|
// LCD / Controller
|
|
//
|
|
#if BOTH(ULTRA_LCD, NEWPANEL)
|
|
|
|
#define BEEPER_PIN -1
|
|
|
|
#if ENABLED(LCD_I2C_PANELOLU2)
|
|
#define BTN_EN1 3 // D3 IO-8
|
|
#define BTN_EN2 2 // D2 IO-10
|
|
#define BTN_ENC 41 // F3 IO-7
|
|
#define SDSS 38 // F0 IO-13 use SD card on Panelolu2
|
|
#endif
|
|
|
|
#define SD_DETECT_PIN -1
|
|
|
|
#endif // HAS_SPI_LCD && NEWPANEL
|
|
|
|
//
|
|
// M3/M4/M5 - Spindle/Laser Control
|
|
//
|
|
#define SPINDLE_LASER_PWM_PIN 24 // B4 IO-3 PWM2A - MUST BE HARDWARE PWM
|
|
#define SPINDLE_LASER_ENA_PIN 39 // F1 IO-11 - Pin should have a pullup!
|
|
#define SPINDLE_DIR_PIN 40 // F2 IO-9
|