You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
3221658a78 | 6 years ago | |
---|---|---|
.. | ||
bltouch | 6 years ago | |
noprobe | 6 years ago | |
README.md | 6 years ago |
README.md
These are example configurations for the low-cost Acrylic Prusa I3 pro B 3D Printer DIY kit and the 3DTouch auto bed leveling sensor based on:
The main characteristics of these configurations are:
- The defined motherboard is
BOARD_GT2560_REV_A_PLUS
. - Travel limits are adjusted to the printer bed size and position.
- An example
SKEW_CORRECTION
for a particular printer is enabled. See comments below about how to adjust it to a particular printer. - Using the LCD controller for bed leveling is enabled.
PROBE_MANUALLY
is enabled, which provides a means to do "Auto" Bed Leveling without a probe.- The
LEVEL_BED_CORNERS
option for manual bed adjustment is enabled. - Bilinear bed leveling is enabled, the boundaries for probing are adjusted to the glass size, and extrapolation is enabled.
PRINTCOUNTER
is enabled, in order to track statistical data.INDIVIDUAL_AXIS_HOMING_MENU
is enabled, which adds individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.- The speaker is enabled for the UI feedback.
bltouch
variant:USE_ZMAX_PLUG
is enabled. See comments about connections below.- Heaters and fans are turned off when probing.
- Multiple probing is set to 3.
First-time configuration
Skew factor
The skew factor must be adjusted for each printer:
- First, uncomment
#define XY_SKEW_FACTOR 0.0
, compile and upload the firmware. - Then, print YACS (Yet Another Calibration Square). Hint, scale it considering a margin for brim (if used). The larger, the better to make error measurements.
- Measure the printed part according to the comments in the example configuration file, and set
XY_DIAG_AC
,XY_DIAG_BD
andY_SIDE_AD
. - Last, comment
#define XY_SKEW_FACTOR 0.0
again, compile and upload.
3DTouch auto leveling sensor
- Print a suitable mount to attach the sensor to the printer. The example configuration file is adjusted to http://www.geeetech.com/wiki/images/6/61/3DTouch_auto_leveling_sensor-1.zip
- Unlike suggested in geeetech.com/wiki/index.php/3DTouch_Auto_Leveling_Sensor, the existing end stop switch is expected to be kept connected to Z_MIN. So, the sensor is to be connected to Z_MAX, according to Marlin's default settings. Furthermore, GT2560-A+ provides a connector for the servo next to thermistor connectors (see GT2560 and GT2560-A+).
- Be careful to respect the polarity of the sensor when connecting it to the GT2560-A+. Unlike end stops, reversing the connection will prevent the sensor from working properly.
- Test and calibrate the sensor.