8345 Commits (ff304d3767ebfbe1dbcde3703bc4fe5aee1587a4)

Author SHA1 Message Date
Scott Lahteine e7570f3195 Improve TMC config organization, naming 7 years ago
Scott Lahteine 374ea49be9 Revert marlinAnalogInputToDigitalPin 7 years ago
Scott Lahteine 34f656decd Add TMC2208 include in tmc_util.h 7 years ago
Scott Lahteine 07cf2cd9c4 Fix sensorless_homing_per_axis compile warning 7 years ago
Scott Lahteine b858c638ad Fix compiler warning for HAL_ANALOG_SELECT 7 years ago
Bob-the-Kuhn c4467da53a
Merge pull request #10063 from ejtagle/bugfix-2.0.x
[2.0.x] DUE - add programming capability to native port
7 years ago
Scott Lahteine 65ce0303f8 Fix MKS_12864_OLED blank issue
Fixes #10071
7 years ago
Scott Lahteine 36452b4d6e Fix filename HAL/DUE/servotimers.h => ServoTimers.h 7 years ago
Scott Lahteine 14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069)
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
7 years ago
Scott Lahteine 5dec828abc Add MKS_12864OLED to lcd_implementation_init
Followup to #7914
7 years ago
Scott Lahteine 468f34104b Patch do_blocking_move_to so 'destination' can be used 7 years ago
Scott Lahteine 5b45aab262 M218: report with no parameters 7 years ago
Scott Lahteine 18de11c1ea Followup to auto-assign of dual axis CS pins 7 years ago
ejtagle 703c8ac0ef Added Arduino-compatible kludge to the (ATMEL supplied) SAM3X USB stack we are now using so the Native port is also usable as a programming port on Arduino DUE and derived designs 7 years ago
Scott Lahteine 28f1276286
[2.0.x] Add Z_AFTER_PROBING option (#10058)
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
7 years ago
Scott Lahteine dd19e74476 Cleanup trailing whitespace
@Bob-the-Kuhn — Please set your git options to remove trailing whitespace on commit.
7 years ago
Scott Lahteine d0ac0151b6 Fix typo in ubl.prepare_segmented_line_to 7 years ago
Scott Lahteine d385b9aac7
Auto-assign CS pins for X2, Y2, Z2 (#10057)
Fixes #9211
7 years ago
Scott Lahteine bae1cb859c Patch flush_and_request_resend for 1.1.x parity 7 years ago
Scott Lahteine 51ebdf3b7d Finish scroll_screen with menu direction/multiplier
Fixes #10041
7 years ago
Bob-the-Kuhn 0d8c15c01f restore PR 9661 files & V1 fix 7 years ago
Scott Lahteine 751785fc97 Followup to recent patches
- `M666` is static, not inline
- Disambiguate some stepper macros
7 years ago
Scott Lahteine a0211f5d6c Disambiguate else in stepper_indirection.h 7 years ago
Scott Lahteine f003173752 Fixup M666
Followup to d6df032
7 years ago
Bob-the-Kuhn bf59a4a6df
Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h" 7 years ago
Sebastianv650 fd1d590726 [2.0.x] Silence M204 (#10037)
`M204` is often used by slicers to set acceleration depending on perimeter, infill, etc., so Marlin's answers are flooding the serial windows. Silence `M204` according to the philosophy that setter commands should only send a reply if no parameter is given.
7 years ago
Scott Lahteine f10c87b442 Update Endstops class for 1.1.x parity 7 years ago
Scott Lahteine d6df0322c2 Update M666 for XYZ dual endstops 7 years ago
Scott Lahteine fbc41c0e98 Update Marlin G-code summary 7 years ago
Scott Lahteine 239902f861 Fix E2END and add EEPROM to Smart RAMPS
Reference #9983
7 years ago
Scott Lahteine ddce486360
Merge pull request #10032 from thinkyhead/bf2_unknown_z_no_raise
[2.0.x] Add UNKNOWN_Z_NO_RAISE to prevent Z grinding
7 years ago
Scott Lahteine 79e6d890d5 Add UNKNOWN_Z_NO_RAISE to example configs 7 years ago
Scott Lahteine 419d12ca1b Add UNKNOWN_Z_NO_RAISE option
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
7 years ago
Scott Lahteine 3b4c89e4b5 Move do_probe_raise closer to set_probe_deployed
…and limit the raise to Z_MAX_POS
7 years ago
Scott Lahteine 2908e76151 Fix position_is_reachable_by_probe typo, add comment
Fix #10029
7 years ago
Roxy-3D 26dc594ebb prevent steppers from turning off during manual probes 7 years ago
Bob-the-Kuhn d8eadf3796 fix ubl_G29.cpp Travis error 7 years ago
Bob-the-Kuhn 914bb80bde removed SDSS init
added device & comm drivers for shared SPI LCDs

mistyped some updates in ultralcd_impl_DOGM.h

remove unwanted changes in onfiguration.h

still can't type

Update HAL_LCD_class_defines.h

include USB mass storage & misc
7 years ago
Scott Lahteine 6d9ea7e184 Fix position_is_reachable_by_probe typo, add comment
Fix #10029
7 years ago
Roxy-3D 646dd5554c
prevent steppers from turning off during manual probes 7 years ago
Scott Lahteine 161ff9ff35 Fix UPDATE_ENDSTOP for CorePQ compatibility
Fixes #9939
7 years ago
Scott Lahteine 49ca67202f Patch configuration_store for extra serial port
Fix #9948
7 years ago
Scott Lahteine cc59ac4603 Fix _tmc_say_axis string address
Fixes #10003
7 years ago
Scott Lahteine 16a8edc5f0 Add more delay before pulse off in Linear Advance ISR
A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153
7 years ago
Scott Lahteine dfd5d2fe75
Have position_is_reachable_by_probe use the whole bed (#10020)
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
7 years ago
Bob-the-Kuhn 67a17446f2 Fix DUE incompatible enum type specification (#10017) 7 years ago
Bob-the-Kuhn 3c58ca181c [2.0.x] Correct step pulse width on LPC1768, DUE & Teensy35_36 (#10016) 7 years ago
Scott Lahteine e297748b22 Apply const, safe_delay in servo.* 7 years ago
Scott Lahteine 3c2bfa5e53
Update powersupply_on in power_on/off (#10015)
Fix #10004
7 years ago
Scott Lahteine 42608b1925 Init old_red to 127 to ensure initial change
Fix #10012
7 years ago
Scott Lahteine 317673fec3 Init watchdog last in setup() 7 years ago
Scott Lahteine 8d32fd997f Wrap NORM_E_DIR/REV_E_DIR macros in do{}while(0) 7 years ago
Scott Lahteine 1913c37a91 Tweak to manual move eindex arg 7 years ago
Scott Lahteine 98d48fc731 Followup to HAL_timer_restrain
Followup to #9985
7 years ago
Scott Lahteine 03e3011332 Fix compile error with MAX_MESSAGE_LENGTH
Fix #9988
7 years ago
Bob-the-Kuhn 6b4a928145 2uS default step pulse (#9989) 7 years ago
Scott Lahteine ca577c1638 Fix up various spacing, comments, and typos 7 years ago
Scott Lahteine d45f19d385 Remove Unicode from var name 7 years ago
Scott Lahteine 224688cc3b Fix for unicode-ignorant gcc preprocessor 7 years ago
Chris Pepper a1a88ebabc HAL function to ensure min stepper interrupt interval (#9985) 7 years ago
Scott Lahteine be0e100fed Fix sd subdirectory encoder position
Followup to 7e386c7
7 years ago
Bob-the-Kuhn 04dedc7ed8 always completely initialize display (#9981) 7 years ago
Scott Lahteine 0149680f54 Fix compile error with char LCD 7 years ago
Scott Lahteine 9515e5aefb Fix LA_active_extruder (static) 7 years ago
Scott Lahteine e5ec793f7e Wrap stepper indirection macros 7 years ago
Sebastianv650 5b85464791 Fix for LA (#9964)
Missed in the original LA 1.5 PR: eISR has to use a local copy of
current_block->use_advance_lead because it might still run wenn the last
block has been set to NULL.
7 years ago
Scott Lahteine 7e386c7e98 Fix encoder position for sddirectory 7 years ago
Scott Lahteine 1d604be671 Suspend auto-report during UBL map output 7 years ago
Scott Lahteine eb212ae073 Add suspend_auto_report flag to suppress auto-report 7 years ago
Scott Lahteine ffbf63e6af Add HAS_TEMP_SENSOR conditional 7 years ago
Scott Lahteine 94f5204629 Move AUTO_REPORT_SD_STATUS to SDSUPPORT block 7 years ago
Scott Lahteine 22a017a856
Rebuild SD file sort array on Stop SD Print (#9976)
Thanks Chuck Hellebuyck.
7 years ago
Scott Lahteine 920d92aa46
Merge pull request #9974 from thinkyhead/bf2_tmc_util_progmem
[2.0.x] Move tmc_util.* extended_axis_codes to PROGMEM
7 years ago
Scott Lahteine b198b49d15 Followup to AUTO_REPORT_SD_STATUS
Followup to #9832
7 years ago
Scott Lahteine 2057177184 Make enums into implicit char 7 years ago
Scott Lahteine e28e3bb532 Move extended_axis_codes to PROGMEM 7 years ago
Scott Lahteine ca0def766e LIN_ADVANCE single stepper optimization 7 years ago
Scott Lahteine 8291ae34f2 Support duplication mode in LIN_ADVANCE 7 years ago
Scott Lahteine b08ec22fe1
Show E0-E4 in monitor_tmc_driver output (#9969)
Fix #9966
7 years ago
Marcio Teixeira fd883c909a Improvements to Lightweight ST7920 status screen. (#9952)
- Show units on lightweight status screen.
- Fixed progress bar so it works with M73
7 years ago
Scott Lahteine 0dd1c4458d
Put more code between pulse start and stop (#9959) 7 years ago
Scott Lahteine f9cafc4001
Fix menu highlight glitch, tweak scrolling code (#9957) 7 years ago
Scott Lahteine bf9fc8ac0e M851 - report only without parameters 7 years ago
Scott Lahteine eb867817b5
Prevent filament runout false positives (#9946) 7 years ago
Scott Lahteine 36262a0479
Use static classes for job timers (#9938) 7 years ago
Scott Lahteine 930720bbbb
Fix broken reverse planner (#9943)
From #9914 by @Sebastianv650
7 years ago
Bob-the-Kuhn 025118da3e Init print_job_timer in setup() instead of "early" (#9937) 7 years ago
Scott Lahteine beeed580b8
Implement digipots for MKS SBASE (#9927)
Fix #9477
7 years ago
Scott Lahteine 07ae23fe14 No pulse delay on last e_steps in advance isr 7 years ago
Scott Lahteine 881529a401 Fix #9904 - toDigital should show 00-99 hours 7 years ago
Scott Lahteine ed758de80d tweak comment in stepper.cpp 7 years ago
Scott Lahteine d1dc863962 autotemp_factor is not value_celsius_diff
See https://github.com/MarlinFirmware/Marlin/issues/9852#issuecomment-369861822
7 years ago
Thomas Moore f3914a432e Clear retracted status when homing the Z axis 7 years ago
Scott Lahteine 6d7f4f84e2
Add board MKS_BASE_HEROIC (#9926)
Followup to #9008

- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
7 years ago
Scott Lahteine 649f375494
Fix: M112 calling kill from interrupt (#9923)
Fix #9906
7 years ago
Scott Lahteine c37b3f995a Sanity-check some graphical LCD-only options 7 years ago
Scott Lahteine a2a672449a Updated boot screen description 7 years ago
Scott Lahteine 61620cbd15 Tweak M211 7 years ago
Scott Lahteine 6e08ddce6e Correct M401 / M402 description 7 years ago
Studiodyne 23a576faf7 [2.0] Fix for FW retract (#9878) 7 years ago