284 Commits (fcceb981914662d9ac7b11087fb42f3a2dfbe2ee)

Author SHA1 Message Date
AnHardt bb4efcf603 Handle temp callbacks when THERMAL_PROTECTION_HOTENDS is not defined
by alternate definition for the callback macros
9 years ago
AnHardt 96d0d04b8f Update LCD buttons less frequently
Move slow_buttons_update into the LCD_UPDATE_INTERVAL block
lcd_implementation_read_slow_buttons() will then be executed ~10 times a
second.
9 years ago
AnHardt c956b52c4a Babystep Multiplier
Analog to https://github.com/MarlinFirmware/MarlinDev/pull/250 by
@RicardoGA

Restore the Babystep Multiplicator functionality and now it's available
for X/Y/Z
9 years ago
AnHardt be7167ed97 Change XY formatting on LCD (PR#2740)
According to #123 negative values for XY at or below -100 are displaying incorrectly, dropping the first digit. Deltas can easily have XY values in this range. This PR adds a function to display floats/ints formatted like `_123`, `-123`, `_-12`, or `__-1` as appropriate and applies it to the XY coordinates on Hitachi displays. It also moves the Z value to the right to be consistent with the XY formatting.
9 years ago
Scott Lahteine 754b13d8fe Patch issue #2315 9 years ago
Scott Lahteine 0c7f7ebcfb Styling adjustments (PR#2668 & PR#2670)
Keep "astyled" reformatting
9 years ago
Richard Wackerbarth 03f0edb57e Fix high LCD status screen update frequency (PR#2655) 9 years ago
Scott Lahteine 5d65a36dee Give lcd_sd_status an UNKNOWN state (PR#180) 9 years ago
Scott Lahteine 7ac7ddbf20 Show nozzles, heaters, and extruders numbered 1-4 9 years ago
Scott Lahteine 5bc480fee8 Fix Move E menu items 9 years ago
Scott Lahteine fc882c34a3 Init lcd_sd_status as false to force lcd_update test
Replaces #145 which is way out of date
9 years ago
Scott Lahteine e27dd5c22d Conditionalize functions that rely on SDSUPPORT 9 years ago
Scott Lahteine 558665cd90 Constrain Tune > Nozzle/Flow menu items 9 years ago
Scott Lahteine f7f6b5faae Fix lcd_move_e compile error (PR#143)
Fix a compile error introduced in #98
9 years ago
Scott Lahteine 2b30e8ac99 Conditionals for ULTIPANEL without SDSUPPORT 9 years ago
Eric Kuzmenko b23d765991 Added Extrude From Multiple Extruders from LCD feature 9 years ago
Richard Wackerbarth 6292d9e815 Rename ENABLE_AUTO_BED_LEVELING
With the introduction of the #if ENABLED(…)

reads better than
9 years ago
Scott Lahteine 46453905d6 Apply remaining ENABLED/DISABLED conditionals 10 years ago
Scott Lahteine 270c766de2 SDCARDDETECT -> SD_DETECT, added docs
- `SD_DETECT_PIN` replaces `SDCARDDETECT`
- `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED`
- Revise the description of `SD_DETECT_INVERTED`
- Add a note about the override of `SD_DETECT_INVERTED` in
`Conditionals.h`
10 years ago
Scott Lahteine 8d3b74cc6e Rename SDCARDDETECT to SDCARDDETECT_PIN
- Rename the pin so it can be tested with `PIN_EXISTS`
- Fix some incorrect tests for `SDCARDDETECT`
10 years ago
Scott Lahteine 94a796c8cc Rename BEEPER to BEEPER_PIN
For consistency with other pins, allowing use of `PIN_EXISTS` macro.
10 years ago
Scott Lahteine 0d8989fc14 Overridable Options - Part 7 (PR#2559)
Apply `ENABLED` / `DISABLED` macros to LCD-related files.
10 years ago
Scott Lahteine c66955aaf9 Mark unchanging arrays as const (PR#2494)
The compiler may be able to optimize if it knows an array won’t be
changing.
10 years ago
Scott Lahteine 69b0490b77 Show minimal preheat options in menus (PR#2471) 10 years ago
AnHardt 722829b058 Move buzzing code to buzzr.h & buzzer.cpp (PR#2307)
at least the lcd independent part from Marlin_main.cpp.
10 years ago
Scott Lahteine a274769f4f Clean up spacing and comments
Also clean up some trailing spaces in a few other sources
10 years ago
AnHardt 6ab7b560af Rework buzzing (PR#2296)
by:
Moving HAS_LCD_BUZZ macro to Coditionals.h
Renaming HAS_LCD_BUZZ to HAS_BUZZER to make clear is has nothing to do with the lcd.
Removing the ULTRALCD condition.

Moving declaration of lcd_buzz() out of the ULTRA_LCD block in ultralcd.h
Moving definition of lcd_buzz() out of the ULTIPANEL block in ultralcd.cpp
Renaming lcd_buzz() to buzz() to make clear is has nothing to do with the lcd.

All buzzing code is now only dependent on the existence of a BEEPER-pin or the definition of a LCD_USE_I2C_BUZZER.

To do: Check the conditions for the BEEPER-pin in all pin-files.
10 years ago
Scott Lahteine 90f858aa85 Use translated strings for axis movement (PR#2280)
Suggest we use the translated strings here. They use (except for
German) the phrasing “Move X” instead of just the axis letter, but they
should fit the available space. The “Extruder” string would be the
same, except it will be translated.
10 years ago
wurstnase e7e964432b consistency name for multiplier
replace extruder_multiply with extruder_multiplier
like feedrate_multiplier or volumetric_multiplier
10 years ago
AnHardt f18f689c01 Replace MSG_F? with MSG_N?
To avoid double definitions.
I prefer to read N for Number not for Nozzle.
10 years ago
AnHardt bc0764894a Shift call of start_watching_heater() into setTargetHotend()
to warrant watching is set or reset.

Make setTargetBed() in _lcd_preheat() dependant of TEMP_SENSOR_BED.
Use disable_all_heaters() in lcd_cooldown() and abort_on_endstop_hit.
10 years ago
Ed Boston ca8d1756d5 Define fixes
Fixed a couple defines that were not changed or commented out.
10 years ago
Ed Boston a83bf18ee1 More functional seperation
Moved SDCARDDETECTINVERTED and SDSLOW to Conditionals.h.
Added U8GLIB_LM6059_AF to define display specific actions.
Added reminder to compile in u8glib
10 years ago
Ed Boston 047e688e93 Changed ADAFRUIT_ST7565 to ELB_FULL_GRAPHIC_CONTROLLER
Rename of define to avoid confusion between the controller and the
display which had similar names.
10 years ago
Ed Boston 41f8cdb3a6 ADAFRUIT_ST7565
Added support for new display type
10 years ago
Scott Lahteine fcfd99c1ae Add comments to lcd_control_temperature_menu 10 years ago
Scott Lahteine 9b3d4380d3 Only watch the heater that was set 10 years ago
Scott Lahteine 54deb9eea3 Enable WATCH_TEMP_PERIOD by default 10 years ago
brupje 8f8bf3a897 Make Marlin actually compile when #define REPRAPWORLD_KEYPAD is uncommented 10 years ago
Scott Lahteine d4c74b8f8c Don't apply M428 if an error occurs
- Also move audio feedback into the command
- Added shorthand for `lcd_buzz` availability
10 years ago
Scott Lahteine d065d37822 Add M428 to set home_offset logically 10 years ago
Scott Lahteine 0f687b5dda Merge branch 'Development' into eeprom_in_gcode
Latest upstream commits
10 years ago
Scott Lahteine 5b248757c7 Level Bed in Prepare submenu
- Add “Level Bed” menu item for auto bed leveling
- Hide the option if homing has not been done yet
- Arrange the Prepare submenu more logically (?)
- Add documentation comments, some white-space
- Apply some coding standards here and there
- Move old encoder multiplier debug option to `ultralcd.cpp`
10 years ago
Scott Lahteine 0fca084ea6 Make EEPROM reproducible in GCode
With these changes the output of `M503 S0` is all you need to restore
the EEPROM. Building on this it is straightforward to save and restore
the EEPROM state using the SD card or external GCode file.

- Added `M145` to set “heatup states” for the LCD menu
- Added `M420` to toggle Mesh Bed Leveling
- Added `M421` to set a single Mesh coordinate
- Extended `Config_PrintSettings` with added M codes
- Cleaned up some comments here and there
10 years ago
Scott Lahteine a22a228bcc Rename files to move them in the IDE 10 years ago
Scott Lahteine a932e7490f No noTone needed, but delay is 10 years ago
Scott Lahteine 9c5d14ea68 Fix BEEPER duration 10 years ago
Scott Lahteine c92b59952a Use millis_t for progress_bar_ms and expire_status_ms 10 years ago
Scott Lahteine 97dfa0365d Rename expireStatusMillis to expire_status_ms 10 years ago
Scott Lahteine ce142afdda G4 shows status message only if no message is set already
- Address issue raised in #1961
10 years ago