Scott Lahteine
2243f72523
Add POWER_LOSS_PIN to example configs
7 years ago
Chris Pepper
47d5fcbbcc
[2.0.x] Change MKS SBASE default serial port to avoid confusion ( #11301 )
7 years ago
Scott Lahteine
c83109c0ae
Merge pull request #11238 from xC0000005/MalyanLCDUpdate
...
[2.0.x] Malyan LCD Feedrate + Better Temp Handling
7 years ago
Scott Lahteine
64f007580b
Fix some header comments
7 years ago
Giuliano
aed1d17a2d
Initialize default units ( #11295 )
...
When `INCH_MODE_SUPPORT` is enabled no default unit is set. This fixes it.
7 years ago
Scott Lahteine
8c40f0c6c7
Reduce TQ message code size
7 years ago
xC0000005
b04e0c0cbb
Malyan LCD feedrate, better temp handling.
7 years ago
Scott Lahteine
065e9c3d66
Add card.longest_filename method
7 years ago
Roxy-3D
71df1f7f57
Don't display M421 information for UBL at startup
...
It takes too long to display the mesh data for large mesh's at startup. We should consider ways to speed this up.
Perhaps it makes sense to display an entire row of the mesh instead of just one mesh point?
7 years ago
Scott Lahteine
be7d1dfb3c
Merge pull request #11267 from teemuatlut/bf2_lpc_spi
...
[2.0.x] LPC1768: Expand hardware SPI class
7 years ago
Giuliano
8f686aa449
[2.0.x] Fix change filament crash ( #11269 )
...
Prevent crash, on filament change, when printer is not homed
7 years ago
teemuatlut
f38c81cdde
LPC176x: Expand HW SPI class
7 years ago
teemuatlut
3b5dec4b13
Add new LPC include folder
7 years ago
Scott Lahteine
e486326910
Vellemann K8400 Y bed size is 180
...
Co-Authored-By: kaimimue <kaimimue@users.noreply.github.com>
7 years ago
Giuliano
e5ea9d200f
[2.0.x] fix kill printer ( #11260 )
...
This will fix kill message on dual printer with 0 alignment offset
7 years ago
Jamie Bainbridge
8c57cadbe7
Include stdlib in fontutils ( #11251 )
...
When `REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER` is defined and Re-ARM build is attempted, `u8g_fontutf8.cpp` includes `fontutils.h` which uses `abs()`.
However, `abs()` is defined in `stdlib.h` which is not included in `fontutils.h`, so compile fails with an error.
Include `stdlib.h` in `fontutils.h` so that `abs()` is defined before `u8g_fontutf8.cpp` needs to use it, resolving the compile error.
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
7 years ago
Scott Lahteine
bf7d0ba859
Assert that XY probe offsets are integers
7 years ago
Scott Lahteine
12854f1909
Add Z_CLEARANCE_MULTI_PROBE to example configs
...
Co-Authored-By: nightgryphon <ngryph@gmail.com>
7 years ago
Scott Lahteine
25e2ca8896
Add Z_CLEARANCE_MULTI_PROBE
...
Co-Authored-By: nightgryphon <ngryph@gmail.com>
7 years ago
Scott Lahteine
fd8a76493b
Unify M91x parameter I meaning, simplify reports ( #11249 )
7 years ago
Scott Lahteine
566d05006d
report_state > event_handler
...
Make the endstop report method track endstop changes on its own.
7 years ago
Scott Lahteine
6b521b6df2
Loosen thermistor table size limit
...
Co-Authored-By: Aaron Griffith <aargri@gmail.com>
7 years ago
Scott Lahteine
20761b88e0
Merge pull request #11212 from AlexanderAmelkin/2.0-HD44780-remove-unused-include
...
[2.0.x][HD44780] Remove unused include
7 years ago
Roxy-3D
603e136e87
Resolve issue where user can't edit UBL's mesh
7 years ago
Alexander Amelkin
ed720194d2
[2.0.x][HD44780] Remove unused include
...
The <binary.h> header is not available in STM32 toolchain
and is not used anywhere in ultralcd_common_HD44780.h.
If it is used anywhere in HD44780 support for other platforms,
it must be included in the corresponding .cpp file directly
and put under appropriate conditional compilation directives
for the platform requiring it.
As I was unable to find such code, I consider the file unused
and hence remove the inclusion.
7 years ago
Scott Lahteine
d05e832f29
Add STM32F1 support for SD-based EEPROM
7 years ago
Scott Lahteine
63f4c9bdb9
Followup to float maths patch
7 years ago
Scott Lahteine
2992112da0
Optimize delta kinematics
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
7 years ago
etagle
1367df2875
Replace double with float, optimize calculation
7 years ago
Scott Lahteine
d960d448fa
Optimize calculations with LROUND
7 years ago
Scott Lahteine
68e6650df7
Remove Quake Fast Inverse SQRT (it isn't faster)
7 years ago
etagle
e7e896e7d7
More tweaks to fastio_Due.h
7 years ago
Chris Pepper
55f4744e54
[LPC176x] Endstop Interrupts Feature ( #11202 )
...
Enable the endstop interrupts feature for LPC176x boards. Although Smoothieboard chose to use non-interrupt capable pins for their endstops, and this has been copied by clones, so they can't use it.
7 years ago
Chris Pepper
5abf5bc8a7
[LPC176x] Fix Interrupt forward declarations ( #11200 )
7 years ago
Chris Pepper
cbea385ed7
[2.0.x] Fix LCD_LANGUAGE options list formatting in config ( #11198 )
...
* Fix LCD_LANGUAGE options list formatting in config
* Remove 'cn' language option from list
7 years ago
Scott Lahteine
6837252fba
Merge pull request #11196 from thinkyhead/bf2_fix_m914_sgt
...
[2.0.x] No M914 or SGT with non-sensorless axes
7 years ago
Scott Lahteine
5379c115c8
Fix Trigorilla include typo
7 years ago
Scott Lahteine
9c058091e9
No M914 or SGT set for non-sensorless axes
7 years ago
Scott Lahteine
c7ec6c68e7
Patch SCARA config to match 1.1.x
7 years ago
Scott Lahteine
480a3d3d0c
Apply sensorless homing requirements only for specified axes
7 years ago
Scott Lahteine
47ee149dfd
Merge pull request #11195 from thinkyhead/bf2_tronxy_x3a
...
[2.0.x] Tronxy X3A configurations and thermistor
7 years ago
Scott Lahteine
8c0ec81a19
Followup to #11187
7 years ago
Scott Lahteine
48c1f32b3e
Add configurations for Tronxy X3A
7 years ago
Scott Lahteine
568cfe7caa
Add thermistor 501 (100K Zonestar)
7 years ago
Scott Lahteine
1a0f4dedad
Fix and improve POWER_LOSS_RECOVERY ( #11187 )
7 years ago
Scott Lahteine
e0ab8acf19
Add "Marlin Dev Mode" option
7 years ago
Scott Lahteine
4b2af6ab48
Minor patches to POWER_LOSS_RECOVERY
7 years ago
Scott Lahteine
1ea222e6fc
Turn off DISABLE_INACTIVE_EXTRUDER with SWITCHING_NOZZLE
...
Fix #11183
7 years ago
Roman Moravčík
8299ac121d
[2.0.x] Slovak translation update ( #11175 )
7 years ago
teemuatlut
3de0c85d41
Fix RRW graphical LCD constructor macro ( #11171 )
7 years ago
TheLongAndOnly
cedc158106
[2.0.x] Board specific init macro ( #11170 )
7 years ago
Chris Pepper
5616581eb1
[LPC176x] Update fastio _GET_INPUT, _GET_OUTPUT macros ( #11168 )
7 years ago
Scott Lahteine
8a8eae8d97
Implement more fastio_Due macros ( #11165 )
7 years ago
Scott Lahteine
c51e27d11d
Do a hard kill for failed homing moves ( #11161 )
7 years ago
Scott Lahteine
90ba77ea0f
Lose the old HOMEAXIS macro
7 years ago
Scott Lahteine
2421f3a47d
Detect endstop hits in any direction
7 years ago
Scott Lahteine
f9a090b2cf
Fix Trigorilla 1.4 pins
...
See #11097
7 years ago
Scott Lahteine
8eaac0dab3
Add delta feedrate scaling ( #11153 )
7 years ago
Scott Lahteine
444725ae9a
Non-conflicting CS pins for MKS Gen L
7 years ago
J.C. Nelson
8c9f90153e
Enable Malyan LCD Support for M200 printers. ( #11051 )
7 years ago
Scott Lahteine
fc10101b06
Tweaks to fastio_Due.h
7 years ago
Scott Lahteine
05518d6add
Add newline to end of file
7 years ago
Scott Lahteine
d4fde91222
Fix serial.h including itself
7 years ago
Scott Lahteine
a431013eb7
Fix G33 compile warning
7 years ago
Scott Lahteine
bd7f5848f1
Remove JUNCTION_DEVIATION_INCLUDE_E option ( #11147 )
7 years ago
Scott Lahteine
fbf1c9b496
Fix and tweak POWER_LOSS_RECOVERY ( #11151 )
7 years ago
Colin Gilgenbach
0fff79c24b
Fixes G29_with_retry behavior ( #11045 )
...
* Fix G29 (ABL) retry behavior
7 years ago
Scott Lahteine
3349eb0020
Fix SKEW_CORRECTION compile error
7 years ago
Scott Lahteine
a264030526
Fix "G29" G29_MAX_RETRIES handling
7 years ago
Scott Lahteine
42f9921482
Ignore Z min endstop with separate Z-probe
...
To allow for the case where a Z endstop (e.g., hall effect) is higher than the probe trigger point, don't check the Z min endstop during probe moves. See #11134
7 years ago
Scott Lahteine
1b8973eb1c
Fix up microsteps conditionals
7 years ago
Scott Lahteine
aa4cd2e861
Eliminate stepper.* signed/unsigned warnings
7 years ago
Eduardo José Tagle
edb21f349a
Fix stepper/planner block handling, race conditions ( #11098 )
...
- Allow planner to alter the deceleration phase of the currently executing block.
- Remove BUSY flag, as it is NON ATOMIC to set bits in the Stepper ISR and Planner at the same time.
7 years ago
Scott Lahteine
4d3a9930c5
Match ASM comment spacing to 1.1.x
7 years ago
Scott Lahteine
053438a3aa
Poll all endstops, even when stationary ( #11123 )
7 years ago
Andy Shaw
3b3029c4bf
Make max_e_jerk an array to reduce CPU usage ( #11118 )
7 years ago
Scott Lahteine
d13f76b7da
Patch some loop macros
7 years ago
Scott Lahteine
229b26b02c
Clear LED matrix without startup test
7 years ago
Alexander Amelkin
ffdbc1f42c
STM32F1: Fix SD card persistent store API ( #11090 )
7 years ago
Giuliano
8d8f257384
[2.0.x] Fix advanced pause init values ( #11095 )
...
Fixed for cycle used to initialize default values
7 years ago
etagle
5b49fccf80
Add stepper driver DIR delay configuration option
...
...and recommended pulse width configuration for A4988
7 years ago
Scott Lahteine
d86f25ab63
Fix Serial ISR priority for LPC1768
...
Co-Authored-By: p3p <p3p@p3psoft.co.uk>
7 years ago
etagle
fb4e0b105b
Fix endstops compilation error
7 years ago
Eduardo José Tagle
48a15d1c7e
[2.0.x] Fix stepper/planner race condition and Stepper pulse timer ( #11081 )
...
* Planner: Removal of some race conditions between Stepper ISR and Planner, some of them pointed out by @AnHardt, some of my own findings
* Fixing timing on stepper pulses adding a compensation for the non-null time required to set ports.
7 years ago
Michael Triffon
7e802145cc
[2.0.x] Add CR-10 stock display support for Re-Arm (EXP3) ( #11068 )
7 years ago
Scott Lahteine
50b6204079
Fix LIN_ADVANCE max_e_jerk_factor
...
According to https://github.com/MarlinFirmware/Marlin/issues/9917#issuecomment-399204568
7 years ago
Scott Lahteine
99591dc20c
Filter endstops state at all times ( #11066 )
7 years ago
Scott Lahteine
a5c11bf578
Merge pull request #11075 from thinkyhead/bf2_value_editing
...
[2.0.x] Fix value editing (with callback)
7 years ago
Roxy-3D
1d7dd0edfd
Add the move_z_after_probing() functionality to UBL's G29 J
7 years ago
Scott Lahteine
383129728a
Edit Z fade as whole numbers
7 years ago
Scott Lahteine
1239e8eda2
Fix value editing with callback
7 years ago
Scott Lahteine
7a84b03796
Use MIN/MAX in post-conditionals
7 years ago
Scott Lahteine
a2a30ff0ac
Use Tool 0 for Dual X Axis G29
...
See https://github.com/MarlinFirmware/Marlin/issues/5597#issuecomment-397683325
7 years ago
Scott Lahteine
e366d55bc2
Don't reset stepper timeout for all g-codes
7 years ago
Scott Lahteine
7406f04029
Use MAX (not max) in stepper.h
7 years ago
Roxy-3D
7c54c4ed27
Tiny improvement to M7219
...
The registers within the Max7219 can get corrupted a number of ways. This allows the Max7219 to be reset and fully initialized.
And... it also allows the user to see the initialization pattern.
7 years ago
Giuliano
a65d15c905
[2.0.x] Fix Italian msg len ( #11058 )
...
Fix message to long for 12864 display
7 years ago
Scott Lahteine
d4795e5b8e
[2.0.x] Tweaks and additions for MAX7219 ( #11034 )
7 years ago
Scott Lahteine
e23677a7b2
Update some G-code comments
7 years ago
Chris Pepper
0312c42f9d
[2.0.x] LPC176x Serial cleanup ( #11032 )
7 years ago