605 Commits (d51e5690f4bf993cb40eb6c2915f28543bb41d73)

Author SHA1 Message Date
Scott Lahteine 817a37169a Apply/unapply const here and there 6 years ago
Scott Lahteine a4c15dc54f
Modify MBL to use IJ instead of XY (#12478) 6 years ago
kAdonis 4ae9a06c60 Update M303.cpp (#12471) 6 years ago
Marcio Teixeira c1e17037e5 Various fixes for MarlinUI and ExtUI (#12439) 6 years ago
Giuliano Zaro 43ecdb606f Fix a compile warning (#12452) 6 years ago
Ludy 56a94c2a26 Use 'target_extruder' in M104 as with M109 (#12448) 6 years ago
Scott Lahteine 66580f32c2
Make CardReader class static (#12451)
* Make CardReader a static class
* Make CardReader flags into bitfields
6 years ago
Scott Lahteine d97e31db4c
Optimize Power-Loss Recovery (#12440) 6 years ago
Scott Lahteine 0e610815e4 No need for Cap:PAREN_COMMENTS 6 years ago
Scott Lahteine 7a075a5dc9 Tweak extruder errors 6 years ago
Scott Lahteine 2d92f333f5 Fix GcodeSuite::T active_extruder reference 6 years ago
Scott Lahteine d2bb53702a
Optimize target_extruder, ignore T with mixing (#12432)
* Optimize target_extruder, ignore T with mixing
* Give G-code Tn parity with tool_change
6 years ago
Scott Lahteine d82c350de7
Miscellaneous LCD code renaming, reordering (#12430)
* Move special characters to language.h
* Apply some naming standards
* Clean up menu item draw functions
* Rename some Temperature methods
* UI => ExtUI
6 years ago
Scott Lahteine 54ec5528a0 hasstatus => has_status 6 years ago
Roxy-3D cda5ef08fa
Debug of G2-G3 for UBL (#12386)
Changes only affect UBL.  Everything else is left alone.
6 years ago
Scott Lahteine 143b2896e0
Add M412 to enable/disable filament runout detection (#12406) 6 years ago
Scott Lahteine a163c89c6a Followup to 50af1d1 6 years ago
Scott Lahteine 50af1d1e08 Differentiate translated On/Off from Serial ON/OFF 6 years ago
Scott Lahteine da17f8ad37 For now (!) don't synchronize in M204 and M205
See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.
6 years ago
Scott Lahteine a0c795b097
Encapsulate common display code in a singleton (#12395)
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
  - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
6 years ago
Scott Lahteine 471f403a67 Reduce code size with plain inlines 6 years ago
Scott Lahteine 6093df11dc
Allow G26 to use the active extruder (#12387)
* Make lcd_quick_feedback argument optional
* Add click_to_cancel option to wait_for_hotend/bed
* Have G26 use the active nozzle and wait_for_hotend/bed
* Use wait_for_release in UBL G29
* Add 'T' parameter to G26 for an initial tool-change
6 years ago
Scott Lahteine bed15fcd81 Tweak 'echo_not_entered' used by MBL's G29 6 years ago
Scott Lahteine 78ccedd6a8 Fix M91x sanity-check to permit TMC2660
Fix #12362
6 years ago
revilor b60abc7c37 [2.0.x] Macro G-codes (#9365) 6 years ago
InsanityAutomation 6471a75a22 Combine more tool-change variables (#12137) 6 years ago
Scott Lahteine 812f6a7dd7 Fix Resume from SD Pause
In reference to https://github.com/MarlinFirmware/Marlin/pull/12098#issuecomment-436231690
6 years ago
Scott Lahteine 488a17b3f5 Use IS_SD_PRINTING() more 6 years ago
Marcio Teixeira 4dbaa6369f Fix const pointer assignment compile error (#12350) 6 years ago
Scott Lahteine e574f01568
More advanced pause tweaks (#12356)
* Followup to LCD_TIMEOUT_TO_STATUS=0
* Make continuous purge screen fit 20x4
* Unify purge message modes
* Preserve last-set pause header mode
6 years ago
Scott Lahteine 4c5ca89d8c
Show the appropriate pause message (#12348) 6 years ago
Scott Lahteine b3b4e6dc45
Change Marlin debug flag names to fix conflicts (#12340)
In reference to #11000
6 years ago
Scott Lahteine 04f173790f Remove trailing whitespace 6 years ago
Scott Lahteine 486f2a66a9 Fix MBL XY parameter error messages
Fix #11522
6 years ago
Scott Lahteine 2613ddf61c Fix "circle" 6 years ago
Scott Lahteine 427bc64ba1 G28 O respects HOME_AFTER_DEACTIVATE
Addressing #11271
6 years ago
Scott Lahteine 498dfa291e Update and fix CHDK 6 years ago
Scott Lahteine 3cbc3ecdd7 Fix 'M43 T' to use 'L' as last pin
- The documentation is correct. The code was wrong.
6 years ago
Scott Lahteine 07a0822ebe M420 support in MARLIN_DEV_MODE 6 years ago
Scott Lahteine 44fa7fb18c Cleanups for leveling-related code 6 years ago
Scott Lahteine cc2bc67440 ENABLED(NEWPANEL) => HAS_LCD_MENU 6 years ago
Scott Lahteine f5eab912ed
Apply #pragma once, misc cleanup (#12322)
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
6 years ago
Scott Lahteine d1ff22b983 Revive SCARA's home offset (unimplemented) 6 years ago
Scott Lahteine e4cf175163
Synchronize on M204, M205 (#12302)
* Add parser.seen for multiple parameters
* Fix M666, use !seen for report
* Synchronize on M204, M205
6 years ago
Ludy 5ba6607181 Fix keypad-related compile error (#12306) 6 years ago
Scott Lahteine 3eb9838dca Simplify TMC sanity-checks 6 years ago
Scott Lahteine 31c28d0dd2
Drop pgm_read_*_near and let headers choose (#12301)
- Drop `pgm_read_*_near` and let headers choose.
- Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional.
- Add `process_subcommands_now` for SRAM-based commands.
6 years ago
Ludy 9f77df2590 Followup to menu refactor. TMC warnings, sanity. (#12288)
- Followup fixes for menu refactor
- Fix TMC sanity checks, unused var warnings
6 years ago
Scott Lahteine 42f8b6c530
Make M125 work with SDSUPPORT (#12289) 6 years ago
Scott Lahteine 44f2a82a56 Move axis_homed, axis_known_position to motion.* 6 years ago