c95450016b
Improve Trinamic support in the EEPROM
7 years ago
48d7036874
Consolidate smart stepper driver initialization
7 years ago
eaefc1e410
Add CorePQ support for BABYSTEPPING ( #10155 )
7 years ago
772810fb24
Followup to PORTVAR patch
7 years ago
93af8aa157
Fix home_delta for SENSORLESS_HOMING ( #10145 )
7 years ago
c6ff39cc14
Spacing cleanup
7 years ago
a6feb58837
Delta support for multiple hotends with offsets ( #10118 )
7 years ago
1e946d681d
Update Marlin for newest TMC libraries
...
- TMC2130Stepper v2.2.0
- TMC2208Stepper v0.0.4
7 years ago
4aebe3d82e
Pretty up EEPROM port args
7 years ago
51bf3c9503
Fix E direction for MK2_MULTIPLEXER with LIN_ADVANCE
7 years ago
e7a61de8af
[2.0] FWRetract Reset (Best way) ( #10083 )
7 years ago
e7570f3195
Improve TMC config organization, naming
7 years ago
07cf2cd9c4
Fix sensorless_homing_per_axis compile warning
7 years ago
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
7 years ago
468f34104b
Patch do_blocking_move_to so 'destination' can be used
7 years ago
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
...
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
7 years ago
751785fc97
Followup to recent patches
...
- `M666` is static, not inline
- Disambiguate some stepper macros
7 years ago
a0211f5d6c
Disambiguate else in stepper_indirection.h
7 years ago
f10c87b442
Update Endstops class for 1.1.x parity
7 years ago
239902f861
Fix E2END and add EEPROM to Smart RAMPS
...
Reference #9983
7 years ago
419d12ca1b
Add UNKNOWN_Z_NO_RAISE option
...
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
7 years ago
3b4c89e4b5
Move do_probe_raise closer to set_probe_deployed
...
…and limit the raise to Z_MAX_POS
7 years ago
2908e76151
Fix position_is_reachable_by_probe typo, add comment
...
Fix #10029
7 years ago
161ff9ff35
Fix UPDATE_ENDSTOP for CorePQ compatibility
...
Fixes #9939
7 years ago
49ca67202f
Patch configuration_store for extra serial port
...
Fix #9948
7 years ago
16a8edc5f0
Add more delay before pulse off in Linear Advance ISR
...
A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153
7 years ago
dfd5d2fe75
Have position_is_reachable_by_probe use the whole bed ( #10020 )
...
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
7 years ago
3c2bfa5e53
Update powersupply_on in power_on/off ( #10015 )
...
Fix #10004
7 years ago
8d32fd997f
Wrap NORM_E_DIR/REV_E_DIR macros in do{}while(0)
7 years ago
98d48fc731
Followup to HAL_timer_restrain
...
Followup to #9985
7 years ago
a1a88ebabc
HAL function to ensure min stepper interrupt interval ( #9985 )
7 years ago
9515e5aefb
Fix LA_active_extruder (static)
7 years ago
e5ec793f7e
Wrap stepper indirection macros
7 years ago
5b85464791
Fix for LA ( #9964 )
...
Missed in the original LA 1.5 PR: eISR has to use a local copy of
current_block->use_advance_lead because it might still run wenn the last
block has been set to NULL.
7 years ago
ffbf63e6af
Add HAS_TEMP_SENSOR conditional
7 years ago
2057177184
Make enums into implicit char
7 years ago
ca0def766e
LIN_ADVANCE single stepper optimization
7 years ago
8291ae34f2
Support duplication mode in LIN_ADVANCE
7 years ago
0dd1c4458d
Put more code between pulse start and stop ( #9959 )
7 years ago
36262a0479
Use static classes for job timers ( #9938 )
7 years ago
930720bbbb
Fix broken reverse planner ( #9943 )
...
From #9914 by @Sebastianv650
7 years ago
025118da3e
Init print_job_timer in setup() instead of "early" ( #9937 )
7 years ago
07ae23fe14
No pulse delay on last e_steps in advance isr
7 years ago
ed758de80d
tweak comment in stepper.cpp
7 years ago
d1dc863962
autotemp_factor is not value_celsius_diff
...
See https://github.com/MarlinFirmware/Marlin/issues/9852#issuecomment-369861822
7 years ago
f3914a432e
Clear retracted status when homing the Z axis
7 years ago
6d7f4f84e2
Add board MKS_BASE_HEROIC ( #9926 )
...
Followup to #9008
- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
7 years ago
649f375494
Fix: M112 calling kill from interrupt ( #9923 )
...
Fix #9906
7 years ago
23a576faf7
[2.0] Fix for FW retract ( #9878 )
7 years ago
91db7930dc
Drop SCARA_FEEDRATE_SCALING
...
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
7 years ago
Scott Lahteine