eaa829b58c
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
8 years ago
1c99ca82d8
Give encoder pulse/steps conditionals their own block
8 years ago
e44294bb4d
Make HOTEND_LOOP more consistent, let compiler optimize it
8 years ago
701f4a6d9d
Merge pull request #5729 from Bob-the-Kuhn/guaranteed-BLTouch-detection
...
guaranteed BLTouch detection
8 years ago
c15b9a6a06
No space after X: or A: in M114 output
8 years ago
e1702816f6
Fix SD_CHECK_AND_RETRY condition
...
Addressing #5806
8 years ago
1bc5be3bdf
Cast DELTA_PRINTABLE_RADIUS to float in sq()
...
Addressing #5625
8 years ago
0369f97ec1
guaranteed BLTouch detection
...
To guarantee that the 5mS pulse from a BLTouch is recognized you need to
have the endstops.update() routine run twice in that 5mS period.
At 200 steps per mm, my system has problems below a feedrate of 120 mm
per minute.
Two things were done to guarantee the two updates within 5mS:
1) In interrupt mode, a check was added to the temperature ISR. If the
endstop interrupt flag/counter is active then it'll kick off the endstop
update routine every 1mS until the flag/counter is zero. This
flag/counter is decremented by the temperature ISR AND by the stepper
ISR.
2) In poling mode, code was added to the stepper ISR that will make sure
the ISR runs about every 1.5mS. The "extra" ISR runs only check the
endstops. This was done by grabbing the intended ISR delay and, if it's
over 2.0mS, splitting the intended delay into multiple smaller delays.
The first delay can be up to 2.0mS, the next ones 1.5mS (as needed) and
the last no less than 0.5mS.
=========================================
BLTouch error state recovery
If BLTouch already active when deploying the probe then try to reset it
& clear the probe.
If that doesn't fix it then declare an error.
Also added BLTouch init routine to startup section
8 years ago
1e4d4e5915
Fix typo in language_uk
...
Thanks to @pavlus for this one
8 years ago
7fe7a0c8be
Merge pull request #5793 from thinkyhead/rc_adjust_probe_output
...
Adjust probe_pt() terminal output to respect probe z-offset
8 years ago
633c253bc1
Merge pull request #5792 from thinkyhead/rc_default_dac_vals
...
Default DAC values for RigidBoard V2
8 years ago
7bbc31704c
Adjust probe_pt() terminal output to respect probe z-offset
8 years ago
a245656db3
Merge pull request #5713 from gege2b/RCBF-French
...
French translation : Added missing strings as well as missing accents
8 years ago
713931338a
Default DAC values for RigidBoard V2
8 years ago
ae706233a8
pinsDebug for 644/1284 & USB646/1286 families
...
added conditional compilation for PWMs 1C & 3C
add Teensyduino compatibility
==========================================
changes per review - minor formatting changes
1) remove non-printable character at the end of line 687
2) split a really long comment into two lines
3) got rid of some trailing spaces
============================================
Made pinsDebug_Teensyduino.h the same between this PR and PR 5668 which
is for a re-written pinsDebug.h file.
The changes were:
1) added copyright @ GNU license header
2) a blank line crept in.
8 years ago
22dfcc9a71
French translation : Added missing strings as well as missing accents
8 years ago
9b5515926a
Merge pull request #5696 from thinkyhead/rc_volumetric_default
...
Allow enabling volumetric filament on config load
8 years ago
0d147ead66
Allow enabling volumetric filament on config load
8 years ago
fa26767efe
Replace all remaining 'boolean' with 'bool'
8 years ago
f6858d9974
Fix M110 without leading N
...
Store N in the right variable.
This is too rarely used.
"mea culpa, mea culpa, mea maxima culpa"
8 years ago
0c0c840ba8
Merge pull request #5683 from emartinez167/EMartinez-Changes
...
Updates to some incorrectly ended strings in the Spanish translation
8 years ago
25dae3bccc
Update language_de.h
...
Small corrections
8 years ago
7292145f4e
Fix for some wrong strings
...
On last commit, some strings were ended with the incorrect character.
This fixes it.
8 years ago
93a9aa6b76
Merge pull request #5682 from thinkyhead/rc_spanish_jan
...
Updates to Spanish language
8 years ago
7a9c1a279b
Merge pull request #5681 from thinkyhead/rc_prevent_boot_loop
...
Reset watchdog in SD init to prevent reboot
8 years ago
e409c7f9e8
Merge pull request #5645 from esenapaj/From-microseconds-to-milliseconds
...
From "microseconds" to "milliseconds"
8 years ago
020c6af7b0
Updates to Spanish language
...
Add missing Spanish language definitions.
8 years ago
d29cc8f7bc
Reset watchdog in SD init to prevent reboot
...
If the watchdog is enabled and bootscreen + SD card checks take too long, Marlin may hang at boot time because of the reset loop. We have this happen all the time with the Anet board if no SD card is inserted.
8 years ago
7743849608
Merge pull request #5680 from thinkyhead/rc_configs_puhlease
...
code_value_float tweak
8 years ago
16357fbfdf
Merge pull request #5619 from Ocarthon/RCBugFix
...
Disable SD Detect for K8400
8 years ago
e57c0fce66
Move MOSFET changes above #include for RIGIDBOARD
...
Correction to #5629
8 years ago
c376f6a2cb
code_value_float tweak
8 years ago
fb3c30e24c
Fix lcd_wait_for_homing causing menu to block
...
As a showcase function for how to do waiting in the lcd menu, this function should be preserved.
8 years ago
f8ae0fd29f
Merge pull request #5647 from manianac/RCBugFix-PrepareMenuFix
...
Fix empty Prepare menu
8 years ago
aab5118c6a
Remove error causing break command
...
Use index macro instead of e
8 years ago
d38e335272
From "microseconds" to "milliseconds"
...
delay() is milliseconds
8 years ago
8ae2bc7e2e
Disable SD Detect for K8400
8 years ago
4061fca1ad
Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT
8 years ago
5ab7b91615
Comment on filament runout sensor config
8 years ago
922c67f17d
Merge pull request #5588 from thinkyhead/rc_remove_biv25
...
Drop biv2.5 delta configurations
8 years ago
8c6c048551
drop biv2.5 delta configurations
8 years ago
92dbeebf40
Define ADV_NEVER, ADV_RATE
8 years ago
306c184b1a
Allow M600 when dryrun debugging
8 years ago
fe2ea2906f
Merge pull request #5573 from thinkyhead/rc_unify_stepper_isr
...
LIN_ADVANCE with unified stepper ISR
8 years ago
84c685f8b5
First draft of Unified Stepper / E Advance ISR
8 years ago
83021d82c6
Merge pull request #5502 from AnHardt/symbol-strings
...
Add symbol-strings
8 years ago
036eccfd6e
Merge pull request #5572 from Kaibob2/patch-5
...
Update language_de.h
8 years ago
b794b76836
Merge pull request #5567 from AnHardt/fix5194
...
Fix 5194
8 years ago
451ba5df01
Merge pull request #5516 from esenapaj/Suppress-warning
...
Suppress warning
8 years ago
92dbc63949
Merge pull request #5571 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
8 years ago
ade72535c4
Update language_de.h
...
Added tarnslation for
```
#define MSG_DEBUG_MENU
#define MSG_PROGRESS_BAR_TEST
```
8 years ago
ab6b005867
Suppress warning
8 years ago
61f15ef7e7
Fix 5194
...
I have been a bit too radical in cleaning up this section.
8 years ago
60515ff700
Update Japanese translation
...
・Add new translation
8 years ago
1e419655f3
Followup to #5550 - spacing before "mm"
8 years ago
1a26ce1cdc
Merge pull request #5550 from FHeilmann/patch-2
...
Allow negative retract values in the LCD
8 years ago
bec30c89e7
Merge pull request #5522 from esenapaj/Add-description-for-dual-x
...
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
8 years ago
7739c0affa
Change "+mm" to "mm" in most languages
...
- Japanese and Chinese still need update
8 years ago
1cba425308
Allow negative recover-swap length from LCD
8 years ago
298a8c6a3c
Merge pull request #5561 from thinkyhead/rc_no_case_light
...
Support for M335 case light "no case light"
8 years ago
644f45cbd8
Merge pull request #5563 from akaJes/m600
...
FILAMENT_CHANGE_FEATURE allowed in idle mode
8 years ago
0d2fc13516
Place "Level Bed" closer to "Auto Home"
8 years ago
b031d28ebf
Encoder events should not skip stripes
8 years ago
22881f38b9
Fix updating of "bool" menu items
8 years ago
eb68715b94
No "Cooldown" menu if heaters are off
8 years ago
4ed976b5ff
m600 fixes
8 years ago
4e2639942b
Support for M335 case light "no case light"
8 years ago
18ba31e9b5
Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example
8 years ago
03af5961b0
Hide (or remove) custom character change on boot screen
8 years ago
1642f5ed31
Add macro to some en strings
8 years ago
dbb2d56c89
Correct comment on watchdog timer
8 years ago
41a30923f3
Merge pull request #5559 from thinkyhead/rc_minimum_gcc_version
...
Throw an error for gcc before 4.7
8 years ago
6d6a1db6ec
Apply const to _EEPROM_writeData value param
8 years ago
f724ef5820
Have bed leveling status output current status, not requested.
8 years ago
20218e553d
Merge pull request #5527 from MagoKimbra/rc_configuration_store_fix_size
...
Fix size
8 years ago
dcfbe2bd3c
Throw an error for gcc before 4.7
8 years ago
82fde7df2e
Merge pull request #5512 from AnHardt/speed-compare-bbr
...
Optimize handling of block_buffer_runtime()
8 years ago
8986225752
Spacing, cleanup in speed_lookuptable.h
8 years ago
e12c8e5cac
Split up thermistor tables
8 years ago
a7334fd2a0
Allow negative retract values in the LCD
...
This can already be done via G-Code, so adding the capability to the LCD should be straight forward.
8 years ago
292eb365c6
Optimize handling of block_buffer_runtime()
...
millis_t is long - divisions take for ever.
Return a kind of millisecond instead of microsecond -
divided by 1024 instead of 1000 for speed. (2.4% error)
That does not matter because block_buffer_runtime is
already a too short estimation.
Shrink the return-type.
8 years ago
6854f44bf2
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
8 years ago
3f6f036f7c
Merge pull request #5524 from thinkyhead/rc_optional_dogm_splitup
...
Report EEPROM data size, not final index
8 years ago
86ba7e4542
Fix size
...
Fix size for writeData and readData.
For bilinear grid 11 x 11 for example, size is 4 (float) x 11 x 11 = 484. uint8_t max is 255.
8 years ago
f9f75c8016
Fix USE_RAW_KINEMATICS in prepare_kinematic_move_to
8 years ago
87921f390a
Clarify what are "logical" positions in the planner
8 years ago
a4f10f59c3
Write the E parameter length correctly
8 years ago
2e904cb4f9
Merge pull request #5514 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
8 years ago
0b6817e0f9
Merge pull request #5505 from android444/patch-4
...
Update for translations language_pl.h
8 years ago
3bd76f60e4
Report EEPROM data size, not final index
8 years ago
78d6d6e076
Merge pull request #5452 from thinkyhead/rc_save_your_mesh
...
Save Bed Leveling to EEPROM
8 years ago
0d0aa6c20d
Patch type for max_acceleration_mm_per_s2 save/restore
8 years ago
d4f5418802
Merge pull request #5517 from esenapaj/Fix-for-PR-#5255
...
Fix for the PR #5255 (Case light menu (3rd attempt))
8 years ago
fa7010b0a1
Merge pull request #5515 from esenapaj/Remove-unnecessary-tabs-and-spaces
...
Remove unnecessary tabs and spaces
8 years ago
6d7b1cdf6c
Add M421 for ABL Bilinear
8 years ago
32e65dc429
Extend `M420` to print state and, with `V`, the matrix / mesh
8 years ago
d04258753b
Don't throw away the bed level matrix on G28
8 years ago
8f0f225d10
Save ABL Planar Matrix to EEPROM
8 years ago
e2429a9da1
Generalize Bed Leveling flag in EEPROM
8 years ago
e42fd7813a
Save ABL Bilinear Grid to EEPROM
8 years ago
492b68f8e3
Better EEPROM read/write error handling
8 years ago
55722c09da
Use "UNPROBED" for un-probed bed_level_grid points
8 years ago
2643404ac8
Throw an error in M420 if can't enable
8 years ago
b1539394fd
Use planner.unapply_leveling to undo tilt in G29
8 years ago
04636f78eb
Re-enable MBL/ABL after M48
8 years ago
9b41638672
Minor tweak to G29 grid points
8 years ago
daa2cad21f
Fix comment on G29 to include 'Z'
8 years ago
8244fefcc2
Tweak call to `reset_bed_level` in G29
8 years ago
0995a5d734
Fixup reset_bed_level
8 years ago
1b2fb2bdc7
ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_*
8 years ago
d486361c69
Fix for commented section of Config_RetrieveSettings()
8 years ago
88157ba529
Fix for the PR #5255 (Case light menu (3rd attempt))
8 years ago
069c6b38dd
Remove unnecessary tabs and spaces
8 years ago
9c8116aedf
Update Japanese translation
...
・Add new translation
8 years ago
57b1275cde
Add symbol-string to _de
...
Add symbol-string for _de
to reduce the frquencey of regenerating 'mappers' and 'fonts'
with the new utf-system.
8 years ago
3363d2c937
Update for translations language_pl.h
8 years ago
06af3b62ba
Move HOLLOW_FRAME options to config_adv
8 years ago
67ca6c7bfe
Codestyle tweaks to ultralcd.cpp
8 years ago
8d9fcd8e6f
Merge pull request #5495 from AnHardt/autoadjusting_display-updates
...
Adaptive screen updates for all kinds of displays
8 years ago
77a360912d
Merge pull request #5491 from yhfudev/devel-rcbugfix-language-headers
...
UTF-8 language header files
8 years ago
d0e24e0876
Adaptive screen updates for all kinds of displays
...
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.
For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.
When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.
When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
8 years ago
2dbd38ce16
tag the utf-8 strings
8 years ago
94ffb58da7
Prevent retract un-hop at wrong height
8 years ago
0772c8e55f
Merge pull request #5487 from thinkyhead/rc_easier_move_axis
...
Rearrange Move Menu, Fix up Delta Calibration
8 years ago
b2c8de856b
Merge pull request #5478 from AnHardt/stepspermm
...
Replace ftostr62sign with ftostr62rj
8 years ago
1fd8185d37
Merge pull request #5492 from thinkyhead/rc_fix_language_es
...
Fix multiple definitions of message macros in the language-es.h
8 years ago
1cdffdede7
fix multiple definitions of message macros in the language-es.h
8 years ago
b67f8cb499
Merge pull request #5490 from jbrazio/update-bqhp2
...
Update the bq Hephestos 2 example configuration
8 years ago
93b2833347
Move Menu: Select axis first, resolution after
8 years ago
48aa0f6475
Merge pull request #5475 from AnHardt/utf-mapper-tr
...
utf8-mapper for Turkish
8 years ago
b9ee0d7bd3
Merge pull request #5488 from thinkyhead/rc_fade_compiler_warn
...
Patch fade_factor compiler warning
8 years ago
641e0936d4
Patch up Delta Calibration Menu
8 years ago
b4dbf4d18a
Non-reentrant "Moving..." screen to safely wait in LCD
8 years ago
7b625e0048
Patch fade_factor compiler warning
8 years ago
6fa8fd15e2
Add negative temperatures for Thermistor 1
...
Changes from #5485 by @AndKe
8 years ago
2b5d424394
Use handle_reprapworld_keypad for keypad handling
8 years ago
887ed73c9b
Expose delta_clip_start_height for use by others
8 years ago
3f75edb1d6
Updated bq Hephestos 2 example configuration
8 years ago
b796e7031d
Update Aragonese translation
8 years ago
cd2b74e88d
Replace ftostr62sign with ftostr62rj
...
`ftostr62sign()` is used only when displaing/editing
Steps/mm. A sign is not needed - the value is always positive.
Because the number part is long there is no't much place for the values name.
With this PR the is one more char for the name possible.
8 years ago
795541f87e
utf8-mapper for Turkish
...
The non utf8 version of turkish is a bit unhandy.
Delete `language_tr.h`
Rename `language_tr_utf.h` to `language_tr.h`
Provide a propper utf8-mapper for Turkish and use it.
8 years ago
7c71bb2900
Merge pull request #5471 from thinkyhead/rc_planner_report_m503
...
Patch to show E factors in M503
8 years ago
39401b7472
Patch to show E factors in M503
8 years ago
6b50230022
Merge pull request #5447 from thinkyhead/rc_update_dutch
...
Dutch cleanup, ordering, placeholders
8 years ago
2c97c11731
Merge pull request #5454 from thinkyhead/rc_fix_delta_g29
...
Fix G29 starting height on DELTA
8 years ago
8239c45b30
Merge pull request #5448 from thinkyhead/rc_eeprom_bump
...
EEPROM: Prolong life. Better support for `DISTINCT_E_FACTORS`.
8 years ago
21ed43df5f
New Dutch terms
8 years ago
4bc6536f54
Move to safe zone on DELTA if using do_blocking_move_to*
8 years ago
6f389158d7
Compile less code with EEPROM off
8 years ago
f2301a2a04
Add e-stepper count to EEPROM (for planner vars)
8 years ago
jes