715 Commits (9f48798ffd8a8e2c3b29deb3ae08c08da69f7514)

Author SHA1 Message Date
Scott Lahteine 9f48798ffd Replace ENABLED with DEFINED for SERVO_ENDSTOPS (PR#2542) 10 years ago
Richard Wackerbarth ae00fad75b Rename as M100 10 years ago
Richard Wackerbarth a401d738df There is an echo in here 10 years ago
Richard Wackerbarth ed7d45e8f5 Memory watcher 10 years ago
Scott Lahteine bea6739774 Don't include Z_RAISE_AFTER_PROBING if not used (PR#2527) 10 years ago
Scott Lahteine e4c01f1c7e Simplify init with ARRAY_BY_EXTRUDERS1 macro (PR#2507) 10 years ago
Scott Lahteine e2957df05c Shorthand for do_blocking_move_to 10 years ago
Scott Lahteine 819c5b9b50 Adjust comment on Z adjustment 10 years ago
Scott Lahteine 5a7356b6fc Patch for G29 final Z position
Include all the necessary pieces to get the final Z position after
probing the bed, and add commentary about other possible changes.
10 years ago
AnHardt 088e09e052 Add forgotten Marlin_main.cpp 10 years ago
Scott Lahteine b116c096bd Reduce set_homing_bump_feedrate, save 42 bytes (PR#2512)
Updates to `set_homing_bump_feedrate`:
- Move the string into Program Memory, reduce length by 31 bytes
- Use an auto to get the divisor, adjust it on error
- Set feedrate once, at the end
10 years ago
Scott Lahteine 469843427d Reduce code in gcode_M81 (PR#2497) 10 years ago
Scott Lahteine c66955aaf9 Mark unchanging arrays as const (PR#2494)
The compiler may be able to optimize if it knows an array won’t be
changing.
10 years ago
Scott Lahteine 278aa15301 Add COUNT macro and apply 10 years ago
Scott Lahteine aac2b9aa9d Reduce code in gcode_M84 (PR#2492)
`gcode_M84` only needs to call `finishAndDisableSteppers`, which calls
all the other functions.
10 years ago
Scott Lahteine e83eac312e Move plan_arc next to prepare_move 10 years ago
Scott Lahteine 5c5936508d G2/G3 Arcs for Delta
- Update prepare_move_delta to take a target argument
- Add Delta support to plan_arc
10 years ago
Scott Lahteine 3b23ccd366 Patch servos code for move
- Have `Servo::attach` explicitly return -1 if it fails
- Check for -1 in `Servo::move` because `servoIndex` might be 0
- Make `attach` / `detach` calls conditional on `SERVO_LEVELING`
- Move `SERVO_LEVELING` define to `Conditionals.h`
10 years ago
Patrick Bogen fba4e6241b Specify print format for reporting invalid tmp_extruder (PR#2465) 10 years ago
AnHardt d15d869267 Rename axis_is_at_home() to set_axis_is_at_home() (PR#2464)
to make clear - it's not a question but an order.
10 years ago
Scott Lahteine f209b755a5 Move the Z probe as far as needed to trigger the switch (PR#2461) 10 years ago
Scott Lahteine 0f1df62389 Fixup comments in code_seen 10 years ago
Scott Lahteine 2945eb6650 Call code_seen only once per parameter 10 years ago
Scott Lahteine db23b9b184 Minor tweak to M204 code (PR#2457) 10 years ago
Scott Lahteine 81d42406b7 Move braces in homeaxis to prevent a hanging else (PR#2451) 10 years ago
AnHardt ed6598adf5 Corrected Bed Height vs. Bed Topology for verbosity > 3
and cleaned out some tabs.

Everything else is a rebased PR#2017 as proposed by @CptanPanic
10 years ago
brian 62302ceb9e Add calculation of difference between auto-correct bed level plane, and measured topo map. 10 years ago
AnHardt 49609f6c14 Activate the new servo.move() function
by replacing the sequences (attach, write, delay, detach), and their conditions with the new function in Marlin.main.cpp
and removing the old configuration in the ABL part of Configuration.h
10 years ago
Scott Lahteine 87a872e103 Use st_get_position_mm where possible (PR#2411) 10 years ago
Scott Lahteine 2e0da8abdc Allow N to take a negative argument (PR@2402) 10 years ago
Scott Lahteine 447dbd6fa5 Add STEPPER_RESET_PIN support 10 years ago
Scott Lahteine 6b1b8cb2b3 Also nullify spaces before the checksum asterisk (PR#2409) 10 years ago
Scott Lahteine 4e9d658141 Prevent a hanging SERIAL_ECHO_START in M111 10 years ago
Scott Lahteine 6b494c1535 Use disable_all_heaters in M111 10 years ago
Scott Lahteine 15190d40df Add extra EOL after M111 10 years ago
AnHardt d421f5250d Correct the sign of zprobe_zoffset for G29 (PR#@391)
Sign flipped with #2167.
See also comments
https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355
and following.
10 years ago
Scott Lahteine 52fcc743ab Replace "target" with "destination" in M600 (PR#2374)
- Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being
used as the index into the `destination[AxisEnum]` array.
10 years ago
AnHardt 23c8c5348f Z-height fix V2b (PR#2351)
here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are
replaced with `zprobe_zoffset`.
10 years ago
Todd Swindoll a111fbbd0a z-probe offset fix (PR#2361)
verified via 1.0.2 tag that compiles by multiple people,
credit for the fix goes to paulusjacobus for the initial find and
sniffle for the correction so M851 works.
10 years ago
Scott Lahteine 9682ed455e Fix comment on M83, add comment to prepare_move 10 years ago
AnHardt 36746143a1 Correct output of M48 (PR#2336)
n_samples is an uint8_t .
Got printouts like:
50 of 2  ...
10 years ago
Scott Lahteine f6ca5a8da8 Allow "M110 N123" without a checksum 10 years ago
Scott Lahteine aaad65ff5d Include a comment documenting M110 10 years ago
Scott Lahteine 862c72b030 Put the mandatory test of gcode_N first 10 years ago
Scott Lahteine 30976f9773 Allow M110 to handle a second N argument 10 years ago
Scott Lahteine 5ccb1c9e7d Use millis for M600 audio feedback interval 10 years ago
Scott Lahteine fb16a83b8a Cleanup M600 documentation comments 10 years ago
Scott Lahteine 97ec224d72 Replace target with destination in M600 10 years ago
Scott Lahteine 4ce9ddbb74 Check the temperature before filament change 10 years ago
AnHardt 722829b058 Move buzzing code to buzzr.h & buzzer.cpp (PR#2307)
at least the lcd independent part from Marlin_main.cpp.
10 years ago