daid303
bbe7d3d0fe
Fixed #312
12 years ago
daid303
8b88e3b386
Fixed #345 , Fixed #267 .
12 years ago
Nicolas Rossi
f3c1fc70a9
Power signal control definitions for ATX and others
12 years ago
daid303
55ba90ac19
Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.
12 years ago
daid303
5ff5cee8ce
Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)
12 years ago
Johann Rocholl
1f45cb0a51
Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.
12 years ago
Johann Rocholl
42e21bb06e
Add support for Printrboard (from https://github.com/lincomatic/Marlin ) and Brainwave (from https://github.com/metrix/Sprinter ).
12 years ago
Erik vd Zalm
f934d0ef5b
Merge remote-tracking branch 'tonokip/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
12 years ago
Martin Lukasik
2f771b3979
Added automatic build numbering.
12 years ago
daid303
a27fef8750
Store the pre-heat constants outside of the ULTIPANEL define, so we can use them when storing EEPROM in a build without the ULTIPANEL.
12 years ago
daid303
ffc69537aa
Update on some comments, make the MOTHERBOARD list complete again.
12 years ago
Jonathan Bastien-Filiatrault
46b9988e26
Search and replace failure.
12 years ago
Jonathan Bastien-Filiatrault
36b452c7ac
Remove abbrs.
12 years ago
Jonathan Bastien-Filiatrault
3cbaad9288
RepRapDiscount Smart Controller pin definitions.
12 years ago
Robert F-C
65c9a0728f
Set default serial port back to 0.
12 years ago
Robert F-C
ab9d183024
Make serial port configurable.
...
This change makes the choice of serial port configurable so that
wireless capability can be easily added by connecting Bluetooth modules
(such as BlueSmirf or JY-MCU) to the expansion port pins.
12 years ago
brupje
326423719f
Add support for Megatronics
12 years ago
ErikZalm
36a746d7d5
Merge pull request #244 from markfinn/pidbed
...
PID for heated bed
12 years ago
Mark Finn
04631d2250
cleanup for pull
12 years ago
ZetaPhoenix
c6caa45ae2
Limit Switch locations based on MIN/MAX limits and homing direction
...
fixes #246
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
Relocated code based on feedback.
12 years ago
ZetaPhoenix
dc566d654f
fixes #246
...
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
12 years ago
Mark Finn
9698f4ea64
bed pid
...
Conflicts:
Marlin/Configuration.h
12 years ago
Erik vd Zalm
e358a2d7af
Added fix for SF Arc Point fillet procedure
12 years ago
tonokip
1c1fddc7ac
Added support for the Rambo reprap electronics board. Added Mcodes to set
...
motor current and microstepping pins.
12 years ago
Erik vd Zalm
5406c533db
Disable FAST_PWM by default. On some systems it does not work ok.
13 years ago
Dabble63
6b45e9f167
Add Duty Cycling to the Heater Bed
13 years ago
Chris Palmer
538189cc19
Fixed soft limits when the origin is in the middle.
...
HOME_POS is now always where the endstop is and can be outside the limits.
The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH.
The Z is axis now homed first if direction is away from the bed.
Saguinololu limit pins change from MIN to MAX according to the homing direction.
13 years ago
Erik van der Zalm
ea2c19f978
Added CoreXY support (Thanks Ilan Moyer)
13 years ago
Erik van der Zalm
aa65fe22ed
decoupled axes sucessfully at least on pure x or y jog
13 years ago
Bernhard
0c123950e9
__ header file replace
13 years ago
Bernhard
0e5e249ab5
added individual pullup setting option to have finer control in case there is a special z-min sensor, for example
13 years ago
Bernhard Kubicek
6b14f95b3e
Merge pull request #170 from linagee/Marlin_v1
...
Marlin v1
13 years ago
linagee
fbd282b3ba
Update Marlin/Configuration.h
13 years ago
linagee
c4490f5f3d
Update Marlin/Configuration.h
13 years ago
Daid
7244aa7eb7
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
linagee
de2ca3b2e8
Grammar correction.
13 years ago
linagee
c2fc466e1b
Update Marlin/Configuration.h
13 years ago
linagee
9f9f498491
Update Marlin/Configuration.h
13 years ago
Guan Yang
602c8ee02b
Melzi support
13 years ago
Erik de Bruijn
e3fe1f0d00
Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed.
...
Turning off the protection might be beneficial to those who want to do fast and long reversals.
13 years ago
Erik van der Zalm
1874cb71a6
Added option to increase the FAN PWM frequency.
13 years ago
Erik van der Zalm
e3821bd86f
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
13 years ago
Erik van der Zalm
02af69911e
Added temperature window to M109. This is needed for systems with no overshoot PID.
13 years ago
Bernhard
464b755918
added support for the UltiController
13 years ago
Erik van der Zalm
67cf105bc6
Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp)
...
Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.
13 years ago
Erik van der Zalm
63aec3c56e
Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart.
...
Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp
13 years ago
Michel Pollet
aa6e6e914e
Makefile: Redone
...
+ Removed most explicit pathnames, use the standard make "VPATH" to let
make find the files for itself.
+ Added a "hardware variant" variable that allows compiging Sanguino and
Gen7 as well as "generic" arduino.
+ Allows overriding the MOTHERBOARD define from the Makefile
+ Removed the 'preprocessor' bit that wasn't needed, now just "include" the
files that are needed, since it allows gcc to show the right file/line
when displaying error/warnings.
+ Uses gcc's own dependency generator to generate the .d files, and
and include these instead of self-patching the makefile
Signed-off-by: Michel Pollet <buserror@gmail.com>
13 years ago
Erik van der Zalm
2e749d60c3
Added DISABLE_MAX_ENDSTOPS
13 years ago
Erik van der Zalm
910f4e77a2
Added 20MHz support.
13 years ago
Erik van der Zalm
e056bf8081
Added E-Jerk
13 years ago