270 Commits (919fe3e4b87f5da3ef44106e16b5355f64326f37)

Author SHA1 Message Date
Scott Lahteine 13ef12ad3f Fix power calculations
As suggested by @max-pau in #3073 - #3074
9 years ago
Scott Lahteine 5cba0210f2 Small patch to Z_SAFE_HOMING comment 9 years ago
jbrazio 143ad74db7 Update PROBE_OFFSET_FROM_EXTRUDER comment section in all example config
files.
9 years ago
Scott Lahteine e7cf85b922 Merge pull request #3013 from thinkyhead/esenapaj-patch-1
Enhanced #3010 - formal Mesh/Manual dependency
9 years ago
Scott Lahteine eb85342fd9 Merge pull request #2989 from AnHardt/fix2661
Pre home display - Stepper release
9 years ago
Scott Lahteine 772460a7b8 Various minor spelling corrections
Redo of #2939 rebased against RCBugFix
9 years ago
Scott Lahteine 9eb4aceee4 Merge pull request #2986 from thinkyhead/enable_watchdog
Enable USE_WATCHDOG by default
9 years ago
AnHardt 615bec2329 Activate warning about possible reduced accuracy by default
Renamed `WARN_REDUCED_ACCURACY` to `DISABLE_REDUCED_ACCURACY_WARNING`

Changed the condition for blinking from
```
#if ENABLED(WARN_REDUCED_ACCURACY)
```
to
```
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
```
9 years ago
AnHardt 4b02f33e69 Distribute config-changes to the other configurations 9 years ago
Scott Lahteine 1093c780c8 Remove obsolete STEPS_MM_E setting 9 years ago
Scott Lahteine c2e5c6c12c Nest Manual Bed Leveling options
This formalizes the dependency of MANUAL_BED_LEVELING on
MESH_BED_LEVELING
9 years ago
Scott Lahteine fbfbc5e330 Enable USE_WATCHDOG by default 9 years ago
Scott Lahteine 9df0e0e0cc Merge pull request #2974 from thinkyhead/sanitycheck_spi_speed
Sanity-check deprecated options replaced by SPI_SPEED
9 years ago
Scott Lahteine b19b272172 Update configurations with SPI_SPEED
- Include aligned comment about new SDSUPPORT behavior
9 years ago
esenapaj 27d918d836 Merge pull request #4 from MarlinFirmware/RCBugFix
Rc bug fix
9 years ago
Scott Lahteine 159ff94afd Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977 9 years ago
Ruwan J Egoda Gamage b58083b0fa Getting rid of SDEXTRASLOW, SDSLOW variables. 9 years ago
Ruwan J Egoda Gamage 1b7c443628 Adding SDULTRASLOW variable.
Instead of changing SDEXTRASLOW variable to a slower speed,  the new
SDULTRASLOW is used for rigidbot panel.
9 years ago
esenapaj d7272e3f36 Merge pull request #3 from MarlinFirmware/RCBugFix
Rc bug fix
9 years ago
Scott Lahteine 62bad1b60f Merge pull request #2848 from japzi/RCBugFix
Fixing Rigidbot LCD Panel Support
9 years ago
esenapaj 59d345a3dd Update Configuration.h 9 years ago
esenapaj 1403b9acc0 Update Configuration_adv.h 9 years ago
Ruwan J Egoda Gamage 2c9e0415c7 Getting rid of SDEXTRASLOW, SDSLOW variables. 9 years ago
Ruwan J Egoda Gamage e6cc232184 Adding SDULTRASLOW variable.
Instead of changing SDEXTRASLOW variable to a slower speed,  the new
SDULTRASLOW is used for rigidbot panel.
9 years ago
Richard Wackerbarth 0b429461d5 Back port Cosmetic changes 9 years ago
Richard Wackerbarth 0cebe85e65 Clean up spacing and duplicate entries
• Removing trailing whitespace
• Adjusting indention for better readability
• Removing duplicated entries
9 years ago
Richard Wackerbarth e7b40bbe98 Change link to U8glib source 9 years ago
Richard Wackerbarth 6bfcb74c25 The probe stowing coordinates have changed 9 years ago
AnHardt c956b52c4a Babystep Multiplier
Analog to https://github.com/MarlinFirmware/MarlinDev/pull/250 by
@RicardoGA

Restore the Babystep Multiplicator functionality and now it's available
for X/Y/Z
9 years ago
AnHardt 33addc52a1 Suppress Z_MIN_PROBE_REPEATABILITY_TEST for DELTA and SCARA configurations (PR#2747)
For now Z_MIN_PROBE_REPEATABILITY_TEST is not possible for DELTA or SCARA
configurations.
This PR comments the feature out, where it is commented in by default.
9 years ago
Scott Lahteine 9b23490f01 Clean up spacing in configs 9 years ago
Richard Wackerbarth e01f5e1ef7 Cleanup 9 years ago
Mike Cochrane 5e36b64635 SDEXTRASLOW for some SD card readers (PR#176)
Add SDEXTRASLOW which runs the SD card at SPI_QUARTER_SPEED. Quarter speed is needed for RIGIDBOT_PANEL
9 years ago
Scott Lahteine db27e67580 Apply PID_ADD_EXTRUSION_RATE to extras 9 years ago
Scott Lahteine 8b3d63c423 Unify Delta XYZ homing rates
As noted in #130 allen key probe stow rate is based on homing rates,
but homing rates were left out of most delta configs. This unifies the
XYZ homing rates and applies the unified rates to allen key movements.
9 years ago
Scott Lahteine 7c72b57313 Unify manual feedrate and Fix LCD MANUAL_FEEDRATE (PR#128)
As noted by @o-lampe at https://github.com/MarlinFirmware/MarlinDev/issues/114#issuecomment-136757614 the `MANUAL_FEEDRATE` for Delta Z should be the same as XY.
9 years ago
Scott Lahteine a39fadf876 Update kossel-pro example config (again?) 9 years ago
Christian Lefrançois 8347a9d6e4 Fix HOMING_BUMP_DIVISOR for deltas configuration
* Re-bump speed divisor should be the same for delta printer.
9 years ago
Richard Wackerbarth 6292d9e815 Rename ENABLE_AUTO_BED_LEVELING
With the introduction of the #if ENABLED(…)

reads better than
9 years ago
Christian Lefrançois 9897a9147c Update ABL comments (PR#95)
* Updates the auto bed leveling comments ONLY.
* Renames "Z probe" word usage in //comments and #errors properly.
9 years ago
Christian Lefrançois a7822e3ff7 Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91)
* Fix a couple of renames omission and macro expansion errors.
9 years ago
AnHardt e2d69f66b2 Make Z_PROBE a Z_MIN_PROBE (PR#65)
Currently we use the probe exclusively as a device to find the build platform(bed).
For the currently supported setups this means, we use it as a additional min-endstop.
A triggered when not deployed probe disturbs the homing process for max-endstops.

Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE
Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP
Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Adjust comments accordingly
Remove Z_MAX  check for the probe in update_endstops().

Using an delta related idea of @clefranc from #61,
extended to the general change for all setups.

Tested with Prusa i3, max-z-endstop and permanently triggered z-probe.
Worked for @clefranc's delta.
9 years ago
Scott Lahteine 46453905d6 Apply remaining ENABLED/DISABLED conditionals 9 years ago
Richard Wackerbarth b227d8c128 Supply a VERSION in a short form for displays
The long descriptor will still be available in M115
9 years ago
Richard Wackerbarth 329acc852e Canonize Option flag USE_AUTOMATIC_VERSION 9 years ago
AnHardt 80f2a20842 Enable bootscreen in all Configurations 9 years ago
Scott Lahteine 1e2deff4fd Rename BTENABLED to BLUETOOTH
- For some reason it’s easy to forget what BT stands for, but it
doesn’t need an abbreviation.
9 years ago
Scott Lahteine 270c766de2 SDCARDDETECT -> SD_DETECT, added docs
- `SD_DETECT_PIN` replaces `SDCARDDETECT`
- `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED`
- Revise the description of `SD_DETECT_INVERTED`
- Add a note about the override of `SD_DETECT_INVERTED` in
`Conditionals.h`
9 years ago
Scott Lahteine 37d1879386 Apply overridables to Configuration files 9 years ago
Scott Lahteine edaaead7e0 Fix comment about SERVO_ENDSTOP_ANGLES 9 years ago
Scott Lahteine 0af2a80e06 Make SERVO_ENDSTOP_ANGLES 2-dimensional 9 years ago
Scott Lahteine ab6f1fdf8b Move & document ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED (PR#2528)
As suggested in #2521
- Move `ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED` because `SDSUPPORT` is
also required.
- Add a note that endstops must be enabled for the feature to have any
effect
9 years ago
AnHardt fd0e81b0c7 Distinguish between BUZZER and SPEAKER (PR#2513)
A speaker needs a AC or a pulsed DC to make a sound, a buzzer only needs a DC.
A buzzer has it's own resonator. It works in most cases to feed the buzzer with a pulsed DC, but the sound will not be as loud as with pure DC.

There seem to be boards where the BEEPER-pin is not able to handle a PWM. Obviously intended for a buzzer.
To make these board able to handle a speaker

* replace the PWM based tone()-function again with a on-delay-off-delay loop.

Hopefully the last time I touch the beeper code.
9 years ago
AnHardt 8b876241bd Some more servo code tweaks
Just set up the pin. Don't move to a random position.

Simplify servo::move()
* servo::move() does not need the pin parameter - The pin is set during servo_init() with attach().
* servo::move() does not need a return value.

SERVO_LEVELING is the wrong condition to deactivate the servos.

Remove some temporary (Servo *) variables.
SanityCheck for the servo indexes.
9 years ago
Scott Lahteine d85861d296 Move macros, add ENABLED/DISABLED, add includes 9 years ago
Richard Wackerbarth b80a6a8d31 Correct Kossel Pro Configuration_adv (PR#2473) 9 years ago
Scott Lahteine 129f986ccf Add COREXZ option to configurations 9 years ago
Scott Lahteine de25a48dec Remove PID examples from preconfigured configs 9 years ago
Scott Lahteine 391386dd94 Update configs for new servo deactivation 9 years ago
Scott Lahteine c3c605c658 Move note about LiquidTWI2 to Configuration.h (PR#2406) 9 years ago
Scott Lahteine dc40a5f6e0 Patch up more outdated config lines 10 years ago
Scott Lahteine 98c9111a7d Update delta configs with latest settings 10 years ago
Scott Lahteine e6baf8afd9 Fix up allen key settings in delta configs 10 years ago
Scott Lahteine a274769f4f Clean up spacing and comments
Also clean up some trailing spaces in a few other sources
10 years ago
Scott Lahteine d3bce05d54 Fix up spacing for filament sensor values 10 years ago
Scott Lahteine bba14dcbe6 Move Z Safe Homing point to the middle of the movement range 10 years ago
AnHardt d1f4471000 Merge pull request #2146 from Wackerbarth/Versioning
Versioning
10 years ago
Jonathan Bastien-Filiatrault d46d9d998e Add maximum bed integral term in example configurations. 10 years ago
Richard Wackerbarth 5ea139fd79 Revised Versioning mechanism 10 years ago
Richard Wackerbarth b878bc5620 Introducing the Kossel Pro Build Configuration 10 years ago