Commit Graph

2816 Commits (85b7cca4d09afbd6fbc000a813375ced29a86bf5)

Author SHA1 Message Date
Scott Lahteine 447dbd6fa5 Add STEPPER_RESET_PIN support
Scott Lahteine a0351bdb73 Remove STEPPER_RESET_FIX option
Scott Lahteine 6b1b8cb2b3 Also nullify spaces before the checksum asterisk (PR#2409)
Scott Lahteine 8e61314323 Use RIGIDBOT_PANEL for consistency with online docs
Scott Lahteine 4b204da3c1 Cleanup of pins_RAMPS_13.h
Scott Lahteine 536f86e896 RigidBot CONTROLLERFAN_PIN in Configuration_adv.h
Scott Lahteine f068e46661 RigidBoard include for pins.h
Scott Lahteine 9ebcae496d RIGIDBOARD / RIGIDPANEL
Scott Lahteine c3c605c658 Move note about LiquidTWI2 to Configuration.h (PR#2406)
Scott Lahteine 4e9d658141 Prevent a hanging SERIAL_ECHO_START in M111
Scott Lahteine bc0fdbe88e Use SERIAL_EOL in SERIAL_PROTOCOLLN macros
Scott Lahteine d78ebbc0e9 Remove unused MSG_OK_B and MSG_OK_T
Scott Lahteine 6b494c1535 Use disable_all_heaters in M111
Scott Lahteine 15190d40df Add extra EOL after M111
AnHardt 0e1cf78f5c Remove code for testing if probing range is too small (PR#2390)
becaue it is over-restrictive and superseeded by the now working tests
if the probe-recktangle can be reached. See iss#2366
AnHardt d421f5250d Correct the sign of zprobe_zoffset for G29 (PR#@391)
Sign flipped with .
See also comments
https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355
and following.
Scott Lahteine 52fcc743ab Replace "target" with "destination" in M600 (PR#2374)
- Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being
used as the index into the `destination[AxisEnum]` array.
Scott Lahteine a5033c3652 Enable LCD_PIN_RESET if it exists (PR#2375)
AnHardt 23c8c5348f Z-height fix V2b (PR#2351)
here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are
replaced with `zprobe_zoffset`.
Todd Swindoll a111fbbd0a z-probe offset fix (PR#2361)
verified via 1.0.2 tag that compiles by multiple people,
credit for the fix goes to paulusjacobus for the initial find and
sniffle for the correction so M851 works.
Scott Lahteine 42465ee444 Cleanup of comments & spacing
Scott Lahteine 9682ed455e Fix comment on M83, add comment to prepare_move
Scott Lahteine bb44fe17cf Fix typo in buzzer.h endif (PR#2337)
AnHardt 36746143a1 Correct output of M48 (PR#2336)
n_samples is an uint8_t .
Got printouts like:
50 of 2  ...
Scott Lahteine f6ca5a8da8 Allow "M110 N123" without a checksum
Scott Lahteine aaad65ff5d Include a comment documenting M110
Scott Lahteine 862c72b030 Put the mandatory test of gcode_N first
Scott Lahteine 30976f9773 Allow M110 to handle a second N argument
Scott Lahteine d135b15bb8 Init all endstop bits to 0 (PR#2332)
Scott Lahteine 5ccb1c9e7d Use millis for M600 audio feedback interval
Scott Lahteine fb16a83b8a Cleanup M600 documentation comments
Scott Lahteine 97ec224d72 Replace target with destination in M600
Scott Lahteine 4ce9ddbb74 Check the temperature before filament change
Jaime van Kessel b8b5762e55 Update Ultimaker URL
Jaime van Kessel d5bfbf5a59 Added correct dutch translation for calibrate.
Scott Lahteine 149c474e55 Updated Russian language (PR#2325)
Gleaned from
https://github.com/MarlinFirmware/Marlin/commit/4ac14a7e5fa8e6e395436664
8976eafd1ae220ae
AnHardt 722829b058 Move buzzing code to buzzr.h & buzzer.cpp (PR#2307)
at least the lcd independent part from Marlin_main.cpp.
AnHardt c461975140 Rename and repair MELZI_1284 (PR#2301)
to MELZI_MAKR3D.

Fix for 
As the normal MELZI also can have a 1284.
schlotzz 1e9cf905c7 Enable ZigZag AutoBedLeveling on Deltas (PR#2273)
ZigZag has been disabled by fault due to do_topography_map
Scott Lahteine ec93383ec8 Add SanityCheck for bed probe position settings (PR#2282)
Scott Lahteine dc40a5f6e0 Patch up more outdated config lines
Scott Lahteine 98c9111a7d Update delta configs with latest settings
Scott Lahteine e6baf8afd9 Fix up allen key settings in delta configs
Scott Lahteine 3b293fc5d1 Move Delta settings lower in delta files
Scott Lahteine df21857583 Move extruder offset settings next to extruders setting
Scott Lahteine 2dd1859247 Cleanup spaces and comments in configs and conditionals
Scott Lahteine a274769f4f Clean up spacing and comments
Also clean up some trailing spaces in a few other sources
Scott Lahteine d3bce05d54 Fix up spacing for filament sensor values
Scott Lahteine b4b10a57fe Fix configurator section directives and values lists
Scott Lahteine bba14dcbe6 Move Z Safe Homing point to the middle of the movement range