bf7af95db3
Move flow_percentage to Planner
7 years ago
8dc2838d98
Move host keepalive to GcodeSuite
7 years ago
8fbb833de9
Encapsulate RGB(W) LEDs
7 years ago
a98e9874db
FWRETRACT as a feature
7 years ago
722786966a
Add gcode.cpp, motion.*, queue.* - Apply to some G-codes.
7 years ago
4231faf779
Initial split-up of G-code handlers by category
7 years ago
e0a189a481
Consolidate Buzzer
7 years ago
bca67a5b79
Main controller updates
7 years ago
142d8aae56
Move debugging to serial.*
7 years ago
a1e2b5da70
Fix LCD_PINS_Dn tests in pinsDebug_list.h
7 years ago
038f82cc38
Fix L6470 init and options
7 years ago
42e2dd9251
Build file updates
7 years ago
614a86a380
SD file updates
7 years ago
82fff87e16
Pins updates
7 years ago
3d8a0ab4b2
Module updates
7 years ago
0fcec02db5
LCD updates
7 years ago
7dd0a46732
Language updates
7 years ago
4a82e95c3e
Feature file updates
7 years ago
d7ee81202f
Libs updates
7 years ago
34101224c4
Inc updates
7 years ago
f52a31a275
Core updates
7 years ago
479652073b
Config updates
7 years ago
54326fb06a
HAL updates
7 years ago
65996e4235
Support file updates
7 years ago
7e42c7563c
Move build files into place
7 years ago
b66d65f865
Move 'sd' files
7 years ago
0b9a88d6ce
Move 'pins' files
7 years ago
2b3b7d5d7f
Move 'thermistor' files
7 years ago
0c9231fd04
Move 'module' files
7 years ago
efa578d6b0
Move 'libs' files
7 years ago
cc92e544a5
Move 'lcd' files
7 years ago
5be07b5db2
Move 'inc' files
7 years ago
9ea2ff950a
Move 'gcode' files
7 years ago
4e4d16c92e
Move 'core' files
7 years ago
fa5f9c2aec
Move 'feature' files
7 years ago
f536c4dccb
Move configs
7 years ago
48351fd6d5
Move root sources
7 years ago
27cbb939b2
Clean up some HAL code
7 years ago
b29b66feda
Temporary fix for odd stepper behaviour with servos
7 years ago
8afe13b1a2
Fix compile issue when watchdog was disabled
7 years ago
b908e38d08
Add needed platform defined gaurds to compile with Arduino IDE
...
Also removed explicit platform HAL directory inclusion from platformio.ini to make sure these errors are caught by Travis in the future
7 years ago
a037ddbf7b
Other spacing tweaks
7 years ago
2af62a5d8d
Apply spacing, const to some HAL code
7 years ago
fa9ff6be6e
try to fix LIN_ADVANCE for 32bit
7 years ago
18f97c4013
add HardwareSerial and SoftwareSerial for Re-ARM.
...
HardwareSerial has been tested on Uart0 (debug header) and Uart3 (i2c connector)
Software Serial has been tested to work bi-directionally at 9600 and 115200
using pins 6 and 63 on J5, and unidirectionally (write only) at 250000.
The code used to test was Teemuatlut's tmc2208 patch, and a few small changes to main used to echo recieved chars back to a host pc.
7 years ago
01fb45b4f8
hybrid PWM system
...
Uses PWM1 to directly control pins 4, 6 & 11 (servo 0, 1 & 3) and PWM1
generated interrupts to control other pins.
Interupt control of the servo pins had too much jitter so switched all
that we could to PWM1 direct control. The PWM1 direct control pins have
less than 1 microsecond pulse width jitter while the interrupt
controlled ones can have 20+ microseconds of jitter.
Also added insurance to the servo code in the "disable servo after move"
section.
7 years ago
94dd39b3b7
LCD_UBL_memory_slot_corrections ( #7516 )
...
* LCD_UBL_memory_slot_corrections
Changed the memory slot edit function to work with the
`settings.calc_num_meshes()`
* Add a little more safety margin...
* More corrections
Error handling when the EEPROM is not available.
7 years ago
8587c4e1ec
Minor corrections to 32-bit branch ( #7514 )
...
Mostly... clean up some compile time warnings for the 20x4 LCD Display.
7 years ago
7342d5c07a
ST7565
7 years ago
97444391e0
Servo & PWM support for LPC1768 ( #7500 )
7 years ago
Scott Lahteine