e6c1cadea0
Set the watchdog to a 4 second timeout, as with 1 second it can timeout during SD card init.
12 years ago
faea7d72b8
Merge pull request #290 from buildrob/Marlin_v1
...
Clean up special serial port cases
12 years ago
12a4d60e18
Fix the EEPROM storage, no longer inline it at multiple locations, and remove the template.
12 years ago
9606f4d04f
Include Marlin_main.cpp in source files.
12 years ago
3cbaad9288
RepRapDiscount Smart Controller pin definitions.
12 years ago
99692dc99e
Clean up special serial port cases
...
Assume SERIAL_PORT 0 if not defined. Collapse un-numbered register
special case. Clarify comments.
12 years ago
5a998558a9
Update suggested by Robert F-C. #289
12 years ago
f6ff0ab767
signed/unsigned fixes.
12 years ago
5d471e0f34
Also reset the PID values to defaults. Fixes #281
12 years ago
d3ebc34958
Hopefully also support chips with a single UART in MarlinSerial now.
12 years ago
b6ff45254e
Better explain the watchdog "problem" and rename the config define so it explains that the feature belongs to the watchdog.
12 years ago
7e348fcb5f
By mistake enabled the watchdog by default. This should be off by default.
12 years ago
06b58a9c4f
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
12 years ago
539f3b3fe4
Merge pull request #284 from brackendawson/Marlin_v1
...
Use the right pins for Gen7 1.4
12 years ago
65c9a0728f
Set default serial port back to 0.
12 years ago
ab9d183024
Make serial port configurable.
...
This change makes the choice of serial port configurable so that
wireless capability can be easily added by connecting Bluetooth modules
(such as BlueSmirf or JY-MCU) to the expansion port pins.
12 years ago
f5631a89e8
Add dummy Emergancy Pin to Gen7 1.4
...
Change required after pulling from ErikZalm.
12 years ago
a4f9e1ebf2
Merge git://github.com/ErikZalm/Marlin into Marlin_v1
12 years ago
2873d67b17
Put bogus temp override back in Gen7 up to 1.3
...
Took out the ifdef when I split 1.4 out and forgot to permanently
define it for <=1.3.
12 years ago
a7e40b2903
Merge pull request #276 from setar/Marlin_v1
...
Fix num of digits on LCD for E and Z axis.
12 years ago
6ed02c86be
Fixed wrong code (will not even compile when EXTRUDERS>2)
12 years ago
2a67363e27
Fix ‘prog_uchar’ definition in LiquidCrystalRus.cpp
12 years ago
205304ddee
Merge git://github.com/ErikZalm/Marlin into Marlin_v1
12 years ago
58bca87c72
fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '
12 years ago
febeb43197
Revert "fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '"
...
This reverts commit cb02c2f9d8
12 years ago
8178dec4c3
Fix num of digits on LCD for E and Z axis.
...
The number of steps per mm often contains 4 digits before the decimal point and does not require precision greater than 0.1
12 years ago
70f57a6844
Merge pull request #273 from setar/Marlin_v1
...
fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '
12 years ago
ff14199e58
Merge pull request #270 from jothan/Marlin_v1
...
Create an explicit rule for building applet/Marlin.cpp.
12 years ago
695938ba3f
Italian language support
12 years ago
cb02c2f9d8
fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '
12 years ago
e4a5e333ef
Generalize.
12 years ago
e10d3136c8
Create an explicit rule for building applet/Marlin.cpp.
...
It would seem that the pattern matches do not work when the source
file is created when make is running. The result of this is that it is
necessary to run "make" twice to build the firmware.
This adds an explicit rule without a pattern match for building
applet/Marlin.cpp it corrects the make behaviour at the cost of adding
a little redundancy in the Makefile.
12 years ago
9f089756b7
Merge pull request #265 from setar/Marlin_v1
...
Added Russian translation
12 years ago
326423719f
Add support for Megatronics
12 years ago
d07b6e93d5
Add support for Megatronics
12 years ago
efcc28d347
Fix check for include LiquidCrystalRus.h
12 years ago
cfc193cdac
Enables support the Cyrillic alphabet for LCD
12 years ago
24bcc9647d
Added Russian translation
12 years ago
bf7e453d02
Unwanted artifacts from unclean merge of bed-pid tree
12 years ago
36a746d7d5
Merge pull request #244 from markfinn/pidbed
...
PID for heated bed
12 years ago
df09e2adce
Spanish updated
12 years ago
ddf6603d81
Spanish language updated. Bug fixes on dialogs.
12 years ago
4bf8b1aeee
fesfas
12 years ago
7afd202b89
New dialogs translated to spanish. Bug fixes.
...
Dialogs from M119 translated, and "Set Preheat" dialogs adapted to the
screen size.
12 years ago
ebc4601185
Some new dialogs translated to Spanish
12 years ago
8016f058bc
fix max endstop pins
12 years ago
d197f8504b
clean up and changes from testing
12 years ago
eb06a886c4
missed
12 years ago
04631d2250
cleanup for pull
12 years ago
0a5ad3ab85
move comment to correct place
12 years ago
8ac5b29e02
Changes to M119 response for easier visual comparison
...
Changed to report on individual lines with "TRIGGERED" or "open" instead of "H" or "L" on one line as H&L could be confused with logic levels High and Low which may be wrong if using inverted logic. Added strings to language.h.
Fixed typo "deu" in English language that was fixed in #134 but got added back in via 9f7f7354f5
12 years ago
c6caa45ae2
Limit Switch locations based on MIN/MAX limits and homing direction
...
fixes #246
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
Relocated code based on feedback.
12 years ago
dc566d654f
fixes #246
...
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
12 years ago
ba898faa7d
Merge pull request #249 from gwelchc/patch-2
...
Slight modification for byte savings
12 years ago
0152ee71a5
Merge pull request #248 from gwelchc/patch-1
...
Binary representation for characters in ultraldc.pde
12 years ago
6ccbfeb80c
Update Marlin/Marlin.pde
...
Added function 'setTargetedHotend' that turns into a function an operation repeated 3 times through the M-codes processing.
This modification saves a few bytes that can be used to add support for new commands.
12 years ago
c433142abf
Update Marlin/ultralcd.pde
...
The joris' char drawins are expressed in binary so to show their content's in a more visual fashion.
This is not a code modification as much as a readibility modification.
12 years ago
1d389ad3a8
Fix M81 not working reliably on Gen7
...
Some discussion of the issue is here http://forums.reprap.org/read.php?181,118329,page=1
12 years ago
9698f4ea64
bed pid
...
Conflicts:
Marlin/Configuration.h
12 years ago
e8c92e0a95
Missing #else in temperature.cpp prevented reading bed temp when TEMP_BED_PIN <7. Thanks to Leland Wallace for helping me track this down via "Sesame Street" coding (what is not like the other)
12 years ago
abf0693e8e
Added KILL_PIN -1 to gen7 boards
12 years ago
47319cf64e
Fixed typo in SF arc fix code.
12 years ago
e358a2d7af
Added fix for SF Arc Point fillet procedure
12 years ago
044a64a1fb
Merge pull request #225 from Justblair/Marlin_v1
...
Added PDF file containing Menu Tree for documentation purposes.
12 years ago
d728e35658
Update Marlin/pins.h
12 years ago
1c1fddc7ac
Added support for the Rambo reprap electronics board. Added Mcodes to set
...
motor current and microstepping pins.
12 years ago
dcd3e8a211
Tidy up
12 years ago
ddd9d0cfd4
Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included.
12 years ago
0e58ef6805
Some dialogs are corrected
12 years ago
0e89022cc3
Correct temptable_55 name.
12 years ago
47d4f55bc0
Fix Gen7 1.4 pinout
...
Gen7 1.4 uses very different pin assignments, might as well make a new
section and remove some of the conditionals from each. It's easier to change
your pin assingment this way if like me you don't wire it exactly to plan.
13 years ago
6cd150842f
Update Marlin/language.h
...
Some dialogs corrected and Default language set to 1
13 years ago
299c18596f
Update Marlin/language.h
...
Some dialogs are corrected
13 years ago
b86336c3f5
Merge pull request #221 from daid/Marlin_v1
...
Long filename support for LCD display
13 years ago
b69e75c89a
Added long filename support.
13 years ago
1d224cc031
merged with upstream and FIXED AGAIN bad translation commit
...
PLEASE BE MORE CAREFUL WHEN SUBMITTING NEW TRANSLATIONS
When you add new menu items / messages always copy them to ALL
languages (just use english)
13 years ago
06c03fe2f0
new method for message for making KILLED message visible
...
The cli(); at the start of the kill() function also stops the internal
arduino timer which stops updating of millis() which prevents the
display of the "KILLED." message.
The new function updates the display directly without checking any
timers.
13 years ago
87ff61a8a6
Fix for #201
13 years ago
aacbebbebe
Added Menu Options to the Main-> Control->Temperature Submenu that allow the user to set new values for the ABS and PLA preheat function. EEPROM updated so that these settings can also be committed to EEPROM memory.
13 years ago
31873ec707
changed int to long to overcome overflow of number display
...
- related bug reports: Issue #201 , Issue #213
13 years ago
de0448343f
added KILL_PIN support / cleaned up manage_inactivity function definition
13 years ago
69961dbba3
fixed incorrect menu messages from last commit...
...
- removed several multiple definitions of same message
- fixed definition of missing messages in german and spanish
- tweaked german translation (a lot)
- added note about changing and testing this file
13 years ago
6c050b8440
Fixes error introduced at commit aee475aa55 which caused the sketch not to comile for language option 1. Several defines were removed but still referenced in ultralcd.pde
13 years ago
b9f9f8f7d3
The pre-heat ABS and PLA options in the LCD Menu were broken a while back. The pre-heat worked fine, but the cooling fans were not switching on as intended. This is now fixed.
13 years ago
d38b96fff1
Update Marlin/language.h
13 years ago
9f7f7354f5
Set default language 1
13 years ago
aee475aa55
Update Marlin/language.h
...
Spanish language included. It features the LCD screen messages and a small part of the Serial messages.
13 years ago
9083966c22
Do not use feedrate multiiply on Z and E only moves.
13 years ago
5406c533db
Disable FAST_PWM by default. On some systems it does not work ok.
13 years ago
f92dc91c3d
Enable M503 also when eeprom is disabled
13 years ago
35a1dd081f
no message
13 years ago
5131ab19ca
Fixed Retract in LCD Menu
13 years ago
96f4f90cb3
Added pause and retract lcd menu items
13 years ago
e10355500d
Updated Language.h with pause, resume, and retract
13 years ago
a97c006bbf
Merge pull request #195 from kobaan/Marlin_v1
...
Updated german translations in language.h
13 years ago
f062794a0d
Merge pull request #208 from Enchiridion/Marlin_v1
...
Added support for dual Z axis stepper drivers
13 years ago
57468d3c21
Merge pull request #210 from Dabble63/Marlin_v1
...
Add Duty Cycling to the Heater Bed
13 years ago
6b45e9f167
Add Duty Cycling to the Heater Bed
13 years ago
adee81170d
M206: save values in eeprom
...
Really, we should have a way to adjust the XYZ homing of a machine in
the eeprom. So as the second stage of this, make the M206 home offset
parameters subject to the M500/M501/M502/M503 eeprom commands.
Bump the eeprom version to "V06".
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
1dba212e18
HOMEAXIS: make into a function
...
Replace the large macro HOMEAXIS with a function. This avoids the
compiler generating three copies of largely identical code. The
saving is 724 bytes of program memory.
We make use of XYZ_CONSTS_FROM_CONFIG to provide convenient
array-shaped access to MAX_LENGTH, HOME_RETRACT_MM and HOME_DIR.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
daid303