2807 Commits (4e9d658141a40f2b88e26207638a10f1ed8ec3b9)

Author SHA1 Message Date
Scott Lahteine 4e9d658141 Prevent a hanging SERIAL_ECHO_START in M111 10 years ago
Scott Lahteine bc0fdbe88e Use SERIAL_EOL in SERIAL_PROTOCOLLN macros 10 years ago
Scott Lahteine d78ebbc0e9 Remove unused MSG_OK_B and MSG_OK_T 10 years ago
Scott Lahteine 6b494c1535 Use disable_all_heaters in M111 10 years ago
Scott Lahteine 15190d40df Add extra EOL after M111 10 years ago
AnHardt 0e1cf78f5c Remove code for testing if probing range is too small (PR#2390)
becaue it is over-restrictive and superseeded by the now working tests
if the probe-recktangle can be reached. See iss#2366
10 years ago
AnHardt d421f5250d Correct the sign of zprobe_zoffset for G29 (PR#@391)
Sign flipped with #2167.
See also comments
https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355
and following.
10 years ago
Scott Lahteine 52fcc743ab Replace "target" with "destination" in M600 (PR#2374)
- Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being
used as the index into the `destination[AxisEnum]` array.
10 years ago
Scott Lahteine a5033c3652 Enable LCD_PIN_RESET if it exists (PR#2375) 10 years ago
AnHardt 23c8c5348f Z-height fix V2b (PR#2351)
here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are
replaced with `zprobe_zoffset`.
10 years ago
Todd Swindoll a111fbbd0a z-probe offset fix (PR#2361)
verified via 1.0.2 tag that compiles by multiple people,
credit for the fix goes to paulusjacobus for the initial find and
sniffle for the correction so M851 works.
10 years ago
Scott Lahteine 42465ee444 Cleanup of comments & spacing 10 years ago
Scott Lahteine 9682ed455e Fix comment on M83, add comment to prepare_move 10 years ago
Scott Lahteine bb44fe17cf Fix typo in buzzer.h endif (PR#2337) 10 years ago
AnHardt 36746143a1 Correct output of M48 (PR#2336)
n_samples is an uint8_t .
Got printouts like:
50 of 2  ...
10 years ago
Scott Lahteine f6ca5a8da8 Allow "M110 N123" without a checksum 10 years ago
Scott Lahteine aaad65ff5d Include a comment documenting M110 10 years ago
Scott Lahteine 862c72b030 Put the mandatory test of gcode_N first 10 years ago
Scott Lahteine 30976f9773 Allow M110 to handle a second N argument 10 years ago
Scott Lahteine d135b15bb8 Init all endstop bits to 0 (PR#2332) 10 years ago
Scott Lahteine 5ccb1c9e7d Use millis for M600 audio feedback interval 10 years ago
Scott Lahteine fb16a83b8a Cleanup M600 documentation comments 10 years ago
Scott Lahteine 97ec224d72 Replace target with destination in M600 10 years ago
Scott Lahteine 4ce9ddbb74 Check the temperature before filament change 10 years ago
Jaime van Kessel b8b5762e55 Update Ultimaker URL 10 years ago
Jaime van Kessel d5bfbf5a59 Added correct dutch translation for calibrate. 10 years ago
Scott Lahteine 149c474e55 Updated Russian language (PR#2325)
Gleaned from
https://github.com/MarlinFirmware/Marlin/commit/4ac14a7e5fa8e6e395436664
8976eafd1ae220ae
10 years ago
AnHardt 722829b058 Move buzzing code to buzzr.h & buzzer.cpp (PR#2307)
at least the lcd independent part from Marlin_main.cpp.
10 years ago
AnHardt c461975140 Rename and repair MELZI_1284 (PR#2301)
to MELZI_MAKR3D.

Fix for #2288
As the normal MELZI also can have a 1284.
10 years ago
schlotzz 1e9cf905c7 Enable ZigZag AutoBedLeveling on Deltas (PR#2273)
ZigZag has been disabled by fault due to do_topography_map
10 years ago
Scott Lahteine ec93383ec8 Add SanityCheck for bed probe position settings (PR#2282) 10 years ago
Scott Lahteine dc40a5f6e0 Patch up more outdated config lines 10 years ago
Scott Lahteine 98c9111a7d Update delta configs with latest settings 10 years ago
Scott Lahteine e6baf8afd9 Fix up allen key settings in delta configs 10 years ago
Scott Lahteine 3b293fc5d1 Move Delta settings lower in delta files 10 years ago
Scott Lahteine df21857583 Move extruder offset settings next to extruders setting 10 years ago
Scott Lahteine 2dd1859247 Cleanup spaces and comments in configs and conditionals 10 years ago
Scott Lahteine a274769f4f Clean up spacing and comments
Also clean up some trailing spaces in a few other sources
10 years ago
Scott Lahteine d3bce05d54 Fix up spacing for filament sensor values 10 years ago
Scott Lahteine b4b10a57fe Fix configurator section directives and values lists 10 years ago
Scott Lahteine bba14dcbe6 Move Z Safe Homing point to the middle of the movement range 10 years ago
Scott Lahteine 318318b02f Add pins_RAMPS_13_EFB.h to reduce redundancy 10 years ago
Scott Lahteine 346c8b339b Remove a test from pins_RAMPS_13.h
- Add 3 new lines to `pins.h` to remove 2 redundant tests in
`pins_RAMPS_13.h`
10 years ago
AnHardt b93cddfcc9 Add lost MKS_BASE to pins.h (PR#2297) 10 years ago
AnHardt 6ab7b560af Rework buzzing (PR#2296)
by:
Moving HAS_LCD_BUZZ macro to Coditionals.h
Renaming HAS_LCD_BUZZ to HAS_BUZZER to make clear is has nothing to do with the lcd.
Removing the ULTRALCD condition.

Moving declaration of lcd_buzz() out of the ULTRA_LCD block in ultralcd.h
Moving definition of lcd_buzz() out of the ULTIPANEL block in ultralcd.cpp
Renaming lcd_buzz() to buzz() to make clear is has nothing to do with the lcd.

All buzzing code is now only dependent on the existence of a BEEPER-pin or the definition of a LCD_USE_I2C_BUZZER.

To do: Check the conditions for the BEEPER-pin in all pin-files.
10 years ago
Scott Lahteine 29122db2fa Fix ULTRA_LCD spelling in HAS_LCD_BUZZ 10 years ago
Scott Lahteine 1d94d098bf Formatting tweaks as part of fixing issue 1497 10 years ago
Scott Lahteine e602c28ad9 Set auto fan pins to OUTPUT during init
Fixes the problem of these pins being left in INPUT state, as described
in #1497
10 years ago
Scott Lahteine 90f858aa85 Use translated strings for axis movement (PR#2280)
Suggest we use the translated strings here. They use (except for
German) the phrasing “Move X” instead of just the axis letter, but they
should fit the available space. The “Extruder” string would be the
same, except it will be translated.
10 years ago
Scott Lahteine e2a4a83586 Don't re-apply Z_RAISE_BETWEEN_PROBINGS in probe_pt (PR #2281) 10 years ago