Commit Graph

2943 Commits (4b9d5cd35252bf022b0898c6a96823cfef92185d)

Author SHA1 Message Date
Scott Lahteine f209b755a5 Move the Z probe as far as needed to trigger the switch (PR#2461)
Scott Lahteine 0f1df62389 Fixup comments in code_seen
Scott Lahteine 2945eb6650 Call code_seen only once per parameter
Scott Lahteine b742af2e2a Move Y_STOP_PIN for Printrboard with SD (PR#2420)
Scott Lahteine baa9199973 Define extern delta only for delta
Scott Lahteine 77e80ef367 Require extruders for thermal code
Scott Lahteine 3bde4f4855 Require temp sensor for bed thermal protection
Scott Lahteine 82a3ed2f9a Cleanup and dev notes in Marlin.h
Scott Lahteine db23b9b184 Minor tweak to M204 code (PR#2457)
Scott Lahteine 81d42406b7 Move braces in homeaxis to prevent a hanging else (PR#2451)
Scott Lahteine 552a327df8 Fix lsDive filename stack overrun (PR#2449)
AnHardt a6628f12cc Eliminate the further use of the pin-parameter
AnHardt 8504992e9f Remove the additional pin variable in Servo.cpp
as sugested by @c-born
inhttps://github.com/MarlinFirmware/Marlin/issues/1885#issuecomment-92618240
AnHardt ed6598adf5 Corrected Bed Height vs. Bed Topology for verbosity > 3
and cleaned out some tabs.

Everything else is a rebased PR#2017 as proposed by @CptanPanic
brian 62302ceb9e Add calculation of difference between auto-correct bed level plane, and measured topo map.
Scott Lahteine de25a48dec Remove PID examples from preconfigured configs
Scott Lahteine 7456710a1f Update configs formatting
Scott Lahteine 391386dd94 Update configs for new servo deactivation
AnHardt 5243d8b523 Deactivate DEACTIVATE_SERVOS_AFTER_MOVE by default
AnHardt 49609f6c14 Activate the new servo.move() function
by replacing the sequences (attach, write, delay, detach), and their conditions with the new function in Marlin.main.cpp
and removing the old configuration in the ABL part of Configuration.h
AnHardt 40b6edcad7 Introduce DEACTIVATE_SERVOS_AFTER_MOVE in Configuration.h
DEACTIVATE_SERVOS_AFTER_MOVE is ought to replace PROBE_SERVO_DEACTIVATION_DELAY.
But it will work on all servo moves, not only the probe servo moves.
AnHardt 2ddb2a2be9 Add Servo::move() to servo.cpp
move(pin, angel) - Sequence of attach(pin), write(angel),
                   if DEACTIVATE_SERVOS_AFTER_MOVE is defined waits SERVO_DEACTIVATION_DELAY, than detaches.

As we have jitter on the servos during moves of the steppers, and detaching them improves this behaviour,
the usual sequence to handle a servo movement is:
attach(pin)
write(angel)
delay(until the servo finished the move)
detache()

Here a function to handle the complete sequence.
mkile 8a01e5fb7a Update Russian translation (PR#2443)
Slightly updated translation.
Richard Wackerbarth e83575537a Compiler defines USBCON for USB devices (PR#2433)
ayberkozgur 7268d46508 Always calculate extruder temperature PID d term (PR#2432)
Scott Lahteine 87a872e103 Use st_get_position_mm where possible (PR#2411)
Scott Lahteine 2e0da8abdc Allow N to take a negative argument (PR@2402)
Scott Lahteine 447dbd6fa5 Add STEPPER_RESET_PIN support
Scott Lahteine a0351bdb73 Remove STEPPER_RESET_FIX option
Scott Lahteine 6b1b8cb2b3 Also nullify spaces before the checksum asterisk (PR#2409)
Scott Lahteine 8e61314323 Use RIGIDBOT_PANEL for consistency with online docs
Scott Lahteine 4b204da3c1 Cleanup of pins_RAMPS_13.h
Scott Lahteine 536f86e896 RigidBot CONTROLLERFAN_PIN in Configuration_adv.h
Scott Lahteine f068e46661 RigidBoard include for pins.h
Scott Lahteine 9ebcae496d RIGIDBOARD / RIGIDPANEL
Scott Lahteine c3c605c658 Move note about LiquidTWI2 to Configuration.h (PR#2406)
Scott Lahteine 4e9d658141 Prevent a hanging SERIAL_ECHO_START in M111
Scott Lahteine bc0fdbe88e Use SERIAL_EOL in SERIAL_PROTOCOLLN macros
Scott Lahteine d78ebbc0e9 Remove unused MSG_OK_B and MSG_OK_T
Scott Lahteine 6b494c1535 Use disable_all_heaters in M111
Scott Lahteine 15190d40df Add extra EOL after M111
AnHardt 0e1cf78f5c Remove code for testing if probing range is too small (PR#2390)
becaue it is over-restrictive and superseeded by the now working tests
if the probe-recktangle can be reached. See iss#2366
AnHardt d421f5250d Correct the sign of zprobe_zoffset for G29 (PR#@391)
Sign flipped with .
See also comments
https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355
and following.
Scott Lahteine 52fcc743ab Replace "target" with "destination" in M600 (PR#2374)
- Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being
used as the index into the `destination[AxisEnum]` array.
Scott Lahteine a5033c3652 Enable LCD_PIN_RESET if it exists (PR#2375)
AnHardt 23c8c5348f Z-height fix V2b (PR#2351)
here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are
replaced with `zprobe_zoffset`.
Todd Swindoll a111fbbd0a z-probe offset fix (PR#2361)
verified via 1.0.2 tag that compiles by multiple people,
credit for the fix goes to paulusjacobus for the initial find and
sniffle for the correction so M851 works.
Scott Lahteine 42465ee444 Cleanup of comments & spacing
Scott Lahteine 9682ed455e Fix comment on M83, add comment to prepare_move
Scott Lahteine bb44fe17cf Fix typo in buzzer.h endif (PR#2337)
AnHardt 36746143a1 Correct output of M48 (PR#2336)
n_samples is an uint8_t .
Got printouts like:
50 of 2  ...
Scott Lahteine f6ca5a8da8 Allow "M110 N123" without a checksum
Scott Lahteine aaad65ff5d Include a comment documenting M110
Scott Lahteine 862c72b030 Put the mandatory test of gcode_N first
Scott Lahteine 30976f9773 Allow M110 to handle a second N argument
Scott Lahteine d135b15bb8 Init all endstop bits to 0 (PR#2332)
Scott Lahteine 5ccb1c9e7d Use millis for M600 audio feedback interval
Scott Lahteine fb16a83b8a Cleanup M600 documentation comments
Scott Lahteine 97ec224d72 Replace target with destination in M600
Scott Lahteine 4ce9ddbb74 Check the temperature before filament change
Jaime van Kessel b8b5762e55 Update Ultimaker URL
Jaime van Kessel d5bfbf5a59 Added correct dutch translation for calibrate.
Scott Lahteine 149c474e55 Updated Russian language (PR#2325)
Gleaned from
https://github.com/MarlinFirmware/Marlin/commit/4ac14a7e5fa8e6e395436664
8976eafd1ae220ae
AnHardt 722829b058 Move buzzing code to buzzr.h & buzzer.cpp (PR#2307)
at least the lcd independent part from Marlin_main.cpp.
AnHardt c461975140 Rename and repair MELZI_1284 (PR#2301)
to MELZI_MAKR3D.

Fix for 
As the normal MELZI also can have a 1284.
schlotzz 1e9cf905c7 Enable ZigZag AutoBedLeveling on Deltas (PR#2273)
ZigZag has been disabled by fault due to do_topography_map
Scott Lahteine ec93383ec8 Add SanityCheck for bed probe position settings (PR#2282)
Scott Lahteine dc40a5f6e0 Patch up more outdated config lines
Scott Lahteine 98c9111a7d Update delta configs with latest settings
Scott Lahteine e6baf8afd9 Fix up allen key settings in delta configs
Scott Lahteine 3b293fc5d1 Move Delta settings lower in delta files
Scott Lahteine df21857583 Move extruder offset settings next to extruders setting
Scott Lahteine 2dd1859247 Cleanup spaces and comments in configs and conditionals
Scott Lahteine a274769f4f Clean up spacing and comments
Also clean up some trailing spaces in a few other sources
Scott Lahteine d3bce05d54 Fix up spacing for filament sensor values
Scott Lahteine b4b10a57fe Fix configurator section directives and values lists
Scott Lahteine bba14dcbe6 Move Z Safe Homing point to the middle of the movement range
Scott Lahteine 318318b02f Add pins_RAMPS_13_EFB.h to reduce redundancy
Scott Lahteine 346c8b339b Remove a test from pins_RAMPS_13.h
- Add 3 new lines to `pins.h` to remove 2 redundant tests in
`pins_RAMPS_13.h`
AnHardt b93cddfcc9 Add lost MKS_BASE to pins.h (PR#2297)
AnHardt 6ab7b560af Rework buzzing (PR#2296)
by:
Moving HAS_LCD_BUZZ macro to Coditionals.h
Renaming HAS_LCD_BUZZ to HAS_BUZZER to make clear is has nothing to do with the lcd.
Removing the ULTRALCD condition.

Moving declaration of lcd_buzz() out of the ULTRA_LCD block in ultralcd.h
Moving definition of lcd_buzz() out of the ULTIPANEL block in ultralcd.cpp
Renaming lcd_buzz() to buzz() to make clear is has nothing to do with the lcd.

All buzzing code is now only dependent on the existence of a BEEPER-pin or the definition of a LCD_USE_I2C_BUZZER.

To do: Check the conditions for the BEEPER-pin in all pin-files.
Scott Lahteine 29122db2fa Fix ULTRA_LCD spelling in HAS_LCD_BUZZ
Scott Lahteine 1d94d098bf Formatting tweaks as part of fixing issue 1497
Scott Lahteine e602c28ad9 Set auto fan pins to OUTPUT during init
Fixes the problem of these pins being left in INPUT state, as described
in 
Scott Lahteine 90f858aa85 Use translated strings for axis movement (PR#2280)
Suggest we use the translated strings here. They use (except for
German) the phrasing “Move X” instead of just the axis letter, but they
should fit the available space. The “Extruder” string would be the
same, except it will be translated.
Scott Lahteine e2a4a83586 Don't re-apply Z_RAISE_BETWEEN_PROBINGS in probe_pt (PR )
Scott Lahteine 6b1b3adaf0 Consistent punctuation in SanityCheck errors (PR#2283)
MagoKimbra eb81982fcd Fix error next command in autotune (PR#2274)
Now send only temperature for T or B, but not send OK.
Host interprets the line to show the right temperature, but not in
response to M105 then stop and send commands until it ends the autotune.
AnHardt 55b23c896a Optimise out_of_range_error() (PR#2265)
by avoiding the strncopy()
filipmu b0860adab6 Fix volumetric multiplier display for filament sensor (PR#2264)
The volumetric multiplier display needs to be multiplied by 100 in order to make it an integer for display purposes.
AnHardt 45642b7fe8 Respect DISABLE_AXIS settings (PR#2216)
when DEFAULT_STEPPER_DEACTIVE_TIME is over
instead of simply turn off all.
wurstnase c85a486445 make the dual z-endstop optional (PR#2277)
it's disabled by default
Scott Lahteine 962b107341 Prevent current_command_args from bypassing nul (PR#2270)
Richard Wackerbarth 06ae832276 Deprecate Support for Arduino IDE < 1.0.5
Note that newer versions of the IDE can still
be made to support compilation for the older boards.
Scott Lahteine ff6081be3a Parse N[0-9]+[ ]* differently (PR )
More general solution to skip N[0-9]+[ ]* in the parser as in 
Scott Lahteine aad121864e Include "Z" in M851 report
Scott Lahteine 96a3fba8ac Reverse the sign of zprobe_zoffset
- When editing on the LCD, minus now means below the nozzle
- Stores the opposite sign in EEPROM, so bumped to “V20”
fmalpartida f92907183c Updated SAV MkI pin header.
Richard Wackerbarth 58941e543e ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED removed
#defining something just to define something else doesn’t
make sense

If you want SDCARDDETECTINVERTED, just define it yourself.

If the previous code was intended to define, undefined and then again define the term, that code is improper.
CONSULitAS 788eb6e647 planner.cpp: remove tab
planner.cpp: single evil and hidden tab removed ♻️ 😏
CONSULitAS 3a5963c0e7 Configuration_adv.h: Add FAN_MIN_PWM for slow fan stopping issue …
* all Configuration_adv.h: Add #define FAN_MIN_PWM for slow fan stopping
issue
* for K8200: uncommented with tested (and working) values
CONSULitAS e55e65d1e4 planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue …
@CONSULitAS

planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue (V2.1 with
macro and linear scaling)

@thinkyhead thanks for idea on linear scaling
paclema 8d295547be * Auto filament change on CHANGEFILAMENT feature. Now you can activate this option that extrude filament until you press the button.
atfield90 6d0e91328d Renamed Board_megatronics_1 to Board_minitronics
atfield90 c4a2e5ac23 Renamed Pins_megatronics_1 to Pins_minitronics
atfield90 2076906aaa Renamed Pins_megatronics_1 to Pins_minitronics
tonokip 10733a2bb0 added minirambo pin definitions. V2
Richard Wackerbarth 303d47228e Define Probe Path in new format
Richard Wackerbarth ad09d6a60f 3 Step Allen Key Probe
Richard Wackerbarth 8359cdf01d Check compatibility for Teensy-based processor
The instruction say to set a #define in fastio.h
However, that value is not included before this test.
Ed Boston 08968c29bb Adding ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED to Examples
Ed Boston fed18bcc20 Removed SDSLOW for ELB_FULL_GRAPHIC_CONTROLLER
Hardware changes has removed the need for this option.
Ed Boston b94a0e1501 Added ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED
The new define allows the sd card detect to be inverted or not from
Configuration.h
Ed Boston bc205c76a3 SDCARDDETECTINVERTED problems
Fixed an error where SDCARDDETECTINVERTED was being defined/undefined
improperly
AnHardt e400fce271 Merge pull request from MagoKimbra/Dryrun
Insert Debug DRYRUN Repetier Host compatible
AnHardt 163a9ff58e Merge pull request from AnHardt/psm
Fix thermal protection state machine target temp. V2
AnHardt c3fe6e61ae Merge pull request from AnHardt/position-out-of-range
Fix out_of_range_error()
MagoKimbra 4db8d2def4 Moved MSG_DEBUG in language.h
AnHardt b7e9ba7591 Back to 1.0.3 dev - for now
AnHardt d1f4471000 Merge pull request from Wackerbarth/Versioning
Versioning
AnHardt b1404a0743 fix thermal protection state machine target temp. V2
If the target temperature is changed then it would always stay in the reset state.
Thanks to @tonokip.

Replaces 
AnHardt 17b0ec84ed Fix out_of_range_error()
For sprintf_P() the first parameter has to be a `char*` not `const char*`.
AnHardt 35af5ef23e Merge pull request from Wurstnase/naming
consistency name for multiplier
wurstnase e7e964432b consistency name for multiplier
replace extruder_multiply with extruder_multiplier
like feedrate_multiplier or volumetric_multiplier
AnHardt d4c6fc5d0a Merge pull request from AnHardt/dualz-semicolon
Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again.
AnHardt 0d9d21d15f Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again.
MagoKimbra 76306f9073 Insert Debug DRYRUN Repetier Host compatible
MagoKimbra 881146bc22 Fix problem Width Cura
fmalpartida 11e3f3375d Merge commit '764e61708b8e73410c7819d59c4970d7089ca6f5' into bugFixing
Updated LCD wiki location.
Alexey Shvetsov a8670b66a7 Update ru translation
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
fmalpartida 93da52d011 Added support for OLED SSD1306 I2C based LCDs.
Wurstnase 9c09967803 Merge pull request from Wurstnase/enstop_bits
faster compare
wurstnase 0f3f7d6835 clean up double endstops
AnHardt 9d2a980bcf Merge pull request from thinkyhead/beep_M600_elsewise
Slight size reduction by adding idle()
AnHardt 2728dc0606 Merge pull request from thinkyhead/reduce_strings
Redo "invalid extruder" to save 304 bytes
Scott Lahteine be5236e839 Reduce setTargetedHotend by removing the switch
Scott Lahteine 06f401e7e5 Redo "invalid extruder" to save 264 bytes
- Use `setTargetedHotend` in `M200`, as with other commands that use
`T` for the extruder
- Synthesize the "invalid extruder" message, obviating several long
strings
Scott Lahteine 1a882bcc2e Merge pull request from thinkyhead/ignore_unrecognized_commands
Ignore unknown commands if they start with G, M, or T
Scott Lahteine a672872717 Merge pull request from AnHardt/MAX6675M105
Print active extruder with M105 for MAX6675
Scott Lahteine 9beed830eb Drop commented code_is_good lines
Scott Lahteine 068d4a1eb2 Ignore unknown commands if they start with G, M, or T
Scott Lahteine 5824f613ff Merge pull request from jothan/bed_integral
Separate the maximum integral power for the bed from PID_INTEGRAL_DRI…
Scott Lahteine c5c9d12630 Merge pull request from AnHardt/displayinit
Initialize the display earlier
Scott Lahteine ef4becc413 Merge pull request from AnHardt/FtoN
Replace MSG_F? with MSG_N?
Scott Lahteine 0564625757 Update M33 for new gcode parser
AnHardt f18f689c01 Replace MSG_F? with MSG_N?
To avoid double definitions.
I prefer to read N for Number not for Nozzle.
AnHardt af7e3f5076 Print active extruder with M105 for MAX6675
Was omitted when T0 is a MAX6675.
Jonathan Bastien-Filiatrault d46d9d998e Add maximum bed integral term in example configurations.
Jonathan Bastien-Filiatrault e86f2342c0 Separate the maximum integral power for the bed from PID_INTEGRAL_DRIVE_MAX / PID_MAX.
My PID_INTEGRAL_DRIVE_MAX was at 96, which was insufficient for my bed
to reach its intended temperature. The head requires a low maximum power since
I run on 24 volts and it has a somewhat low thermal mass.
AnHardt f0523b5816 Initialize the display earlier
to have it ready to display errors during (temperature)-setup.