0ca9db7051
Correct HOTENDS for SWITCHING_EXTRUDER
7 years ago
569df3fc0c
Fix interrupt-based endstop detection
...
- Also implemented real endstop reading on interrupt.
7 years ago
a11eb50a3e
Refactor and optimize Stepper/Planner
...
Better encapsulation and considerably reduce stepper jitter
7 years ago
3c76bda2d8
Fix switching extruder
...
`DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.
7 years ago
35258dd50b
Consistent heating status and status reset
...
Fix #10699
7 years ago
625035a9ce
Fix M301 access to lpq_len ( #10714 )
...
Co-Authored-By: Zwaubel
7 years ago
306f0f2135
Move Stepper::synchronize to Planner ( #10713 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
7 years ago
05fca752d6
Clean up autostart handling
7 years ago
11ab017dd0
Creality3D Power-Loss Recovery
7 years ago
6c7a17dba6
Abort SD printing more safely ( #10407 )
...
Allow the current command to complete when aborting an SD print, otherwise some commands (G28, G29, etc.) will cause trouble.
7 years ago
cc6d41e1d3
Use a macro for HAL header redirection ( #10380 )
7 years ago
56486c5c0e
Apply const to manage_inactivity
7 years ago
902c885782
Switch to TMC2130 compatible hardware SPI & misc ( #10299 )
7 years ago
adcb87f0db
Z Endstop Servo => Z Probe Servo
7 years ago
1cb810ff1c
[2.0.x] Automatically reset stepper timeout ( #10179 )
...
* Automatically reset stepper timeout in manage_inactivity
Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.
* blocks_queued => has_blocks_queued
7 years ago
97e8a6ebd9
Various fixes for DUE... ( #10152 )
...
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
7 years ago
9fd1016bb1
Trust the bootloader to clear globals
7 years ago
ae39fbd646
Also suppress keepalive with suspend_auto_report
7 years ago
53362b81cc
Tone fixes/changes ( #10151 )
7 years ago
72281c4ff9
Turn power off in `kill` instead of setting PS_ON to input
7 years ago
0543362b34
Don't init the tone timer if no BEEPER_PIN
7 years ago
317673fec3
Init watchdog last in setup()
7 years ago
eb212ae073
Add suspend_auto_report flag to suppress auto-report
7 years ago
ffbf63e6af
Add HAS_TEMP_SENSOR conditional
7 years ago
36262a0479
Use static classes for job timers ( #9938 )
7 years ago
025118da3e
Init print_job_timer in setup() instead of "early" ( #9937 )
7 years ago
eb079959fb
Report sd card progress [FR] #9751 ( #9832 )
...
* SD Status auto-report feature
Feature Request #9751
7 years ago
cfdcf91df5
Fix compile error with initTone
7 years ago
65519263f4
Fix broken LEVEL_BED_CORNERS
...
Fix #8805
7 years ago
73cd34b121
Finish AUTO_POWER_CONTROL implementation
...
Followup to #9503
7 years ago
d3ca82d8c2
Support for multiple filament runout sensors
7 years ago
ca55f2927a
Pulldown pin mode support ( #9701 )
...
Implemented for LPC1768.
7 years ago
93c0198b2d
Init LCD welcome message programmatically
7 years ago
5990266724
Init CS pins before loading settings ( #9566 )
7 years ago
112917cfef
No EXTRUDER_RUNOUT_PREVENT during print
7 years ago
b2f8b4ada5
I2C position encoders update ( #9533 )
...
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
7 years ago
b3f115fa0a
Marlin.ino needs no content ( #9506 )
7 years ago
b5e92f4f90
[2.0.x] Enable / disable PSU automatically ( #9503 )
7 years ago
a718f5bdf3
Don't run `M600` on filament runout if the nozzle is cold
7 years ago
f7efac57b7
Multi-host support
7 years ago
7541316bb4
Add M701/M702 Filament Load/Unload, M603
7 years ago
9686ffedef
Single pause flag also indicates SD print pause
7 years ago
026e301307
lcd_map_control deps on ULTIPANEL
7 years ago
33a6fc70e4
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
7 years ago
b6f9c333d4
Adding hooks into the idle loop so HALs can execute 2nd plane tasks, such as serving SD card read/writes requested from the USB MSD layer
7 years ago
4782acf60e
Merge pull request #8780 from fiveangle/bf2-typo
...
[2.0.x] typo in Marlin.cpp
7 years ago
0cd1e91056
[2.0.x] TMC driver update ( #8769 )
7 years ago
69efb87d19
typo in Marlin.cpp
7 years ago
e37dd64548
Apply LEDColor, language fixes
7 years ago
9406c87a97
Fix up LCD init / charset
7 years ago
Scott Lahteine