4421 Commits (47d55513ec59423522219477e9d8ce020af5ad3f)

Author SHA1 Message Date
AnHardt f799f18388 MBL typo 9 years ago
AnHardt 8b02e68cb6 Make raise for probe deploy relative in homeaxis()
Make raise for probe deploy relative in homeaxis()
by setting `current_position[axis]` to zero later.
9 years ago
Scott Lahteine e48502866b Merge pull request #3611 from alephobjects/M108_cancel_heatup
Introduce M108 cancel wait for heatup/cooldown of the hotend and bed
9 years ago
Scott Lahteine d70197f514 Merge pull request #4204 from thinkyhead/rc_fix_gcode_t_position
Additional patches for gcode_T position change
9 years ago
Scott Lahteine 869b517589 Merge pull request #4205 from thinkyhead/rc_fixup_unit_references
References to millimeters in code comments need an update
9 years ago
Scott Lahteine e104b91ea6 References to millimeters in code comments need an update 9 years ago
AnHardt ff91d28a3a Remove wants_to_cool warning
Remove wants_to_cool warning
9 years ago
Scott Lahteine c9e536cf87 Additional patches for gcode_T position change 9 years ago
Scott Lahteine 60865fc45b Merge pull request #4202 from thinkyhead/rc_fix_gcode_t_position
Fix position adjustment with gcode_T and MBL
9 years ago
Scott Lahteine f841038313 Merge pull request #4201 from thinkyhead/rc_info_fit
Shorter labels for Print Stats info
9 years ago
Scott Lahteine f31af61ee2 Fix position adjustment with gcode_T and MBL 9 years ago
Scott Lahteine a8f5c2bf96 Merge pull request #4192 from birkett/k8400
Add Velleman K8400 board support.
9 years ago
Scott Lahteine ef8980bfa0 Shorter labels for Print Stats info 9 years ago
Scott Lahteine 2ed625dafa Fix compiler warnings for static screens 9 years ago
Anthony Birkett e77844594d readme.md -> README.md 9 years ago
Anthony Birkett a0b00d29e3 Add a ported example configuration for the Velleman K8400 (Vertex) printer.
Supports both dual and single head printers (with the correct config).
Includes community sourced feed rate fix.

Rename / move files.

Remove redundant definitions.
9 years ago
lrpirlet 9b42c6b44b apply correction when swtiching from MBL to physical in G28 X 9 years ago
esenapaj 95347fc650 Follow-up the PR #3662 (Rewritten FILAMENT_CHANGE_ENABLE feature)
・Update a forgotten Configuration_adv.h of Cartesio
9 years ago
Scott Lahteine a06c5165a7 Shorter strings for smaller LCDs 9 years ago
Scott Lahteine 982f10e6a0 Use STATIC_ITEM for LCD message display 9 years ago
Petr Zahradnik 43ff0ce35f Rewritten FILAMENT_CHANGE_ENABLE feature 9 years ago
Scott Lahteine 51b7820686 Patch up About Printer sub-menus 9 years ago
Scott Lahteine 439e78147d Static menu items take an optional string, LJ by default 9 years ago
Scott Lahteine fa9b2a925d Tweak spacing in printcounter.cpp 9 years ago
Scott Lahteine dbfc87cdcf Squish sanity check for build info 9 years ago
Anthony Birkett 7a377c1d75 Add "About Printer" information menu.
Includes:
  *firmware version / branch / date.
  *extruder count
  *board information (name, serial details, power supply type)
  *thermistors (names, min/max temperatures)
  *printer statistics (PRINTCOUNTER details)

Thanks to @thinkyhead for contributions.
9 years ago
Scott Lahteine 77a923d8ce Merge pull request #4186 from thinkyhead/rc_array_macros
Simplified variable-size array macros
9 years ago
Scott Lahteine e650a75b88 Simplified variable-size array macros 9 years ago
Scott Lahteine ac4f235912 Merge pull request #4167 from thinkyhead/rc_eeprom_checksum
EEPROM Checksum
9 years ago
esenapaj 03b8f88092 Tab to Space 9 years ago
AnHardt cb1b31f69b Unconditional do_probe_raise() in probe_pt()
If Z_RAISE_BETWEEN_PROBINGS is null or undefined the probe is currently not raised by home_offset[Z_AXIS] and zprobe_zoffset.
But when different from 0 is.

If an undefined Z_RAISE_BETWEEN_PROBINGS expands to 0 (and it does) this is the solution.


A similar asymmetry exists with the newly introduced 'short-cut' in G28 - but its the rise before anything is probed - so should not make a difference.
9 years ago
Scott Lahteine 7ef7843fd4 Merge pull request #4181 from thinkyhead/rc_rename_a_move_func
Do interpolated moves for Allen Key deploy/stow
9 years ago
Scott Lahteine 6b2a7b30af Extra comments to clarify EEPROM code 9 years ago
Scott Lahteine 787f394676 MAX_EXTRUDERS replaces mysterious "4" 9 years ago
Scott Lahteine bc3748b7bc Add shared Config_Postprocess for Read and Reset 9 years ago
Scott Lahteine adcd0f5de3 Some formatting in configuration_store.cpp 9 years ago
Scott Lahteine 5e370006fc EEPROM Checksum 9 years ago
Scott Lahteine 725fde8b26 Merge pull request #4169 from thinkyhead/rc_wait_but_break
Allow wait-for-cooling, break at threshold or if cooling stalls
9 years ago
Scott Lahteine da6b0dab5f Use prepare_move_to_destination for Allen Key deploy/stow 9 years ago
Scott Lahteine c42f8fb8dd Rename some movement sub-functions 9 years ago
Scott Lahteine b6b3a4afbf Merge pull request #4168 from thinkyhead/rc_viki2_for_ramps
Support for VIKI2 in RAMPS and derivatives
9 years ago
Scott Lahteine f84d85f761 Cleanup extruder runout configs 9 years ago
Scott Lahteine 5e14a528dd Always wait for cooling in M109/M190, break at low temp or if cooling stalls 9 years ago
Scott Lahteine 0b0b7aac6e Support for VIKI2 in RAMPS and derivatives 9 years ago
Scott Lahteine abda4ab427 Clean up CNControls pins 9 years ago
Scott Lahteine 683975cf90 Fix spelling in a config comment 9 years ago
Scott Lahteine 8268c0a9a0 Always define temp sensor, heater pins for RUMBA 9 years ago
Scott Lahteine db19959735 Merge pull request #4161 from thinkyhead/rc_general_cleanup
Reduce storage requirements for strings, make some PGM
9 years ago
Scott Lahteine 2e96276bf4 More debug message cleanup 9 years ago
Scott Lahteine dc2c0e5e24 Simpler debug output for deploy/stow 9 years ago
Scott Lahteine bd491818d6 Reduce storage requirements for strings, make some PGM 9 years ago
Scott Lahteine ee876dcd7a Merge pull request #4159 from thinkyhead/rc_rigidbot_diff
Rigidbot V2 support - has MCP4728 digipot
9 years ago
Scott Lahteine 0c24e0e445 Support for newer Wire library 9 years ago
Scott Lahteine ddb386c139 Init DAC_DISABLE_PIN in dac_init 9 years ago
AnHardt e480ee0054 Further cleanup of G28 for probes 9 years ago
AnHardt 39883d03fc universalize axis_unhomed_error() 9 years ago
AnHardt e616093d4c Simplify dock_sled()
`dock_sled()` is never called with offset parameter - remove it.
We move x only - so only that needs to be homed. Consequence is - we can home to z-min now with a sled probe!
Feedrates are set and restored in `do_blocking_move()`.
We already checked if the probe is deployed/stowed in deploy/stow_probe.
```
if (z_loc < _Z_RAISE_PROBE_DEPLOY_STOW + 5) z_loc = _Z_RAISE_PROBE_DEPLOY_STOW;
```
makes no sense - remove.
Now the raise is the same for deploy/stow -> move before the if.
Replace the if with a ternary.
Instead writing LOW/HIGH use the boolean `stow` we already have.

There is no reason for not using the sled probe in G29/M48 with 'E'.
It takes a while but works. (tested!)
9 years ago
Scott Lahteine 6c60869409 Support DAC_OR_ADDRESS in Printrboard too 9 years ago
Scott Lahteine 593c8bf286 Support for Rigidbot V2 9 years ago
Scott Lahteine 511503ede9 CARTESIO_UI has lcd contrast 9 years ago
Scott Lahteine 829c92f1ba Use Z_RAISE_BETWEEN_PROBINGS with MBL 9 years ago
Scott Lahteine eb1755208f Merge pull request #4153 from thinkyhead/rc_probe_raise_options
Combine Z raise before/after options
9 years ago
Scott Lahteine 10da7ac86c Combine Z raise before/after options 9 years ago
Scott Lahteine 9caa8941e2 Merge pull request #4149 from thinkyhead/rc_minimum_raise_in_probe_pt
Ensure a minimum height before XY move in probe_pt
9 years ago
Scott Lahteine 3fa631130f Ensure a minimum height before XY move in probe_pt 9 years ago
Scott Lahteine a7684eef7a Squish code in ST7920 9 years ago
AnHardt b4076883cc Set testet delays for K8200, RAMBO, MINIRAMBO and ST7920 9 years ago
AnHardt 4454d80276 Decrease the needed nops to 1
by shitfing the left shift into the high phase.

```
2	cbi 0x2,1 ;set CLK                      //
1	in r18,__SREG__                         //1
1-3	sbrc r24,7                              //2-4
2	rjmp .L19                               //4
1	cli                  .L19:              //5
2	lds r25,258          lds r25,258        //7
1	andi r25,lo8(-2)     ori r25,lo8(1)     //8
2	sts 258,r25          sts 258,r25        //10
1	out __SREG__,r18     out __SREG__,r18   //11
2	.L3:                 rjmp .L3           //13     //2
2	sbi 0x2,1 ;reset CLK //                 //13-15  //2-4
1	lsl r24	 ;  val      //1
1	nop                  //2
2	cbi 0x2,1 ;set CLK   //4
...
```
9 years ago
AnHardt 56c42b572c 3 ms speedup for ST7920 and delay for BOARD_3DRAG
and saving ~1k memory
by limiting the `#pragma GCC optimize (3)` optimisation to `ultralcd_st7920_u8glib_rrd.h`. These optimisation was and is not done for all the other displays, is the reason for the big additionally use of memory, because the complete 'ultralcd.cpp' and 'dogm_lcd_implementation.h' was optimised (sadly i did not observe a change in speed).

Unrolling the loop in `ST7920_SWSPI_SND_8BIT()`, what i expected the optimiser to do, by hand, saved some speed by eliminating the loop variable (i) compares and increases. Every CPU cycle in this loop costs at least 0.5ms per display update because it's executed more than 1k times/s.

The delays are now pre-filled with the calculated values for 4.5V driven ST7920.
A way to simply add __your__ timing into the configuration was made.

At 4.5V
1.) The CLK signal needs to be at least 200ns high and 200ns low.
2.) The DAT pin needs to be set at least 40ns before CLK goes high and must stay at this value until 40ns after CLK went high.

A nop takes one processor cycle.
For 16MHz one nop lasts 62.5ns.
For 20MHz one not lasts 50ns.

To fulfill condition 1.) we need 200/62.5 = 3.2 => 4 cycles (200/50 = 4 => 4). For the low phase, setting the pin takes much longer. For the high phase we (theoretically) have to throw in 2 nops, because changing the CLK takes only 2 cycles.

Condition 2.) is always fulfilled because the processor needs two cycles (100 - 125ns) for switching the CLK pin.


Needs tests and feedback.
Especially i cant test 20MHz, 3DRAG and displays supplied wit less than 5V.
Are the delays right? Please experiment with longer or shorter delays. And give feedback.

Already tested are 5 displays with 4.9V - 5.1V at 16MHz where no delays are needed.
9 years ago
Scott Lahteine ca184d3d72 Merge pull request #4147 from thinkyhead/rc_fix_M48_raise
Fix debug output in probe_pt
9 years ago
Scott Lahteine b4161cbd98 Fix debug output in probe_pt 9 years ago
Edward Patel da88b00585 MBL: Add support for max z endstop
See https://github.com/MarlinFirmware/Marlin/issues/4088
9 years ago
Scott Lahteine 74878d1f16 Always do a brief delay in `lcd_quick_feedback` 9 years ago
Scott Lahteine 7de7552069 Merge pull request #4133 from MagoKimbra/Single_home_axis_delta
Single home Axis Delta need simple sync_plan_position
9 years ago
Scott Lahteine 15a6b49f37 Simplified probe_pt (in G30) 9 years ago
Scott Lahteine 6a7045b9bf Remove clean_up_after_endstop_move 9 years ago
Scott Lahteine 2a4f866561 Simplified probe_pt (in G29) 9 years ago
Scott Lahteine 89a2aa026b Simplified probe_pt (in M48) 9 years ago
Scott Lahteine f8530c5d1f Simplified probe_pt function (G28 grid) 9 years ago
Scott Lahteine c376c08042 Simplified probe_pt function (part 1) 9 years ago
Scott Lahteine 9a71b7f8ad Fix debug message for 3-point leveling 9 years ago
Scott Lahteine 550c03a5a9 Drop raise_z_after_probing function 9 years ago
Scott Lahteine bb38c816af Always raise in deploy_z_probe / stow_z_probe 9 years ago
Scott Lahteine 68f3350050 Cleanup M401 / M402 9 years ago
Scott Lahteine 3afda99adf Regular handlers for G31 / G32 9 years ago
Scott Lahteine 6803c8e37e Move Z up before, or down after XY, for "blocking move" 9 years ago
Scott Lahteine 03c70c1990 SERVO_DEACTIVATION_DELAY => SERVO_DELAY 9 years ago
MagoKimbra 570f3bbc07 Single home Axis Delta need simple sync_plan_position 9 years ago
Scott Lahteine 61f34eec03 Merge pull request #4125 from jbrazio/bugfix/planner-warning
Fixes some compiler warnings
9 years ago
Scott Lahteine bdcd628896 Merge pull request #4126 from thinkyhead/rc_lin_timing_patch
Patch LIN_ADVANCE timing issue
9 years ago
João Brázio 664232140d
Fixes somes compiler warnings 9 years ago
Sebastianv650 0c5192b288 Patch LIN_ADVANCE timing issue
Also the extruder stepper ISR has to keep an eye on step_loops count.
9 years ago
Scott Lahteine d4134e6901 Define Z_SAFE_HOMING point when Z_PROBE_SLED is activated alone 9 years ago
Scott Lahteine 7b2fadd598 Apply some fixes from Andreas
Derived from
https://github.com/AnHardt/Marlin/commit/6e8ede8c694fa4d9e3c769840b09d56
7f8d8e0dd
9 years ago
Scott Lahteine bd01592816 Goodbye MECHANICAL_PROBE 9 years ago
Scott Lahteine 2640d13a9f Simplify initial raise in M48 9 years ago
Scott Lahteine 3763d45656 Return Z position in run_z_probe 9 years ago
Scott Lahteine 1f48b5c30f Pass a raise to probe_pt, not a Z position 9 years ago
Scott Lahteine 6fdd5ba246 Save and restore feedrate in more places 9 years ago
Scott Lahteine fe173c2bc6 Generalized probe raise, use for after probing 9 years ago
Scott Lahteine 7da3080761 Simpler cleanup in G28 / G29 9 years ago
Scott Lahteine 15229d988b Fix compile error for bed matrix in M48 9 years ago
Scott Lahteine c01352cbd5 Add a dependency for z servo macros 9 years ago
Scott Lahteine c3794bd695 Add HAS_PROBING_PROCEDURE conditional 9 years ago
Scott Lahteine 42ce60c5cc Make sure NUM_SERVOS is set for Z servo endstop 9 years ago
Scott Lahteine b590a7dee0 Make Z_RAISE_BETWEEN_PROBINGS a more general option 9 years ago
Scott Lahteine bb9c67b4b5 Tweak some feedrate vars 9 years ago
Scott Lahteine 5158bd6e93 Screen out `G29 E` for sled and allen key, allow single probe 9 years ago
Scott Lahteine ccae92588d Cleanup debug in G28 and G29 9 years ago
Scott Lahteine b4a9d2366c Use a macro for kinematic sync_plan_position 9 years ago
Scott Lahteine bfccf26294 Use sync_plan_position_delta where needed 9 years ago
Scott Lahteine a6b8c67df4 Move probe deploy after setup call in G29 9 years ago
Scott Lahteine e69916d1bd Split up endstop_move functions 9 years ago
Scott Lahteine 0e18a4897b Simpler handling of sled/allen-key in probe_pt 9 years ago
Scott Lahteine 1a92e2ef18 Comment on run_z_probe 9 years ago
Scott Lahteine 68e0e5855e For all probes, at the end of G29 simply raise and stow 9 years ago
Scott Lahteine c3023f8cc5 Make M401/M402 available with HAS_BED_PROBE 9 years ago
Scott Lahteine 9f0c255c69 Show uncorrected position in set_bed_level_equation_3pts 9 years ago
Scott Lahteine 07298ac992 Initialize current_position to home_offset on boot 9 years ago
Scott Lahteine d50539583a Make XY_PROBE_SPEED a general probe option 9 years ago
Scott Lahteine 2798499b71 XY_TRAVEL_SPEED => XY_PROBE_SPEED 9 years ago
Scott Lahteine 88dc543584 Add a macro for XY_TRAVEL_FEEDRATE 9 years ago
Scott Lahteine 117db77c55 make motor_current_setting static and constexpr 9 years ago
João Brázio 19fb04d761 Update bq Hephestos 2 config 9 years ago
Scott Lahteine b0e47608e6 Merge pull request #4108 from esenapaj/Fix-for-PR-#4093
Fix for PR #4093 (Make Z Probe options independent of ABL), etc
9 years ago
Scott Lahteine c84732e605 Merge pull request #4111 from esenapaj/Cosmetic-changes-and-small-fix-for-thermistortables.h
Cosmetic changes and small fix for thermistortables.h
9 years ago
Scott Lahteine cdc661ea5e Merge pull request #4110 from esenapaj/Small-cosmetic-changes-for-language-files
Small cosmetic changes for language files
9 years ago
Scott Lahteine c8186e9423 Merge pull request #4109 from esenapaj/Enclose-#error-string-by-double-quotes
Enclose #error string by double-quotes
9 years ago
Scott Lahteine 40cd20a236 Fix comments on EXPERIMENTAL_I2CBUS 9 years ago
esenapaj 385945ca31 Cosmetic changes and small fix for thermistortables.h
・Adjust spacing
・Standardize comments position
・Remove ',' at the tail of array
9 years ago
esenapaj fac58f0291 Cosmetic changes for language files 9 years ago
esenapaj 14b661b9e5 Enclose #error string by double-quotes 9 years ago
esenapaj d583ea852d Standardize format description of Panel 9 years ago
esenapaj aa6d35bd49 Move code block of probe to appropriate position 9 years ago
esenapaj 740fb2ce39 Adjust spacing 9 years ago
esenapaj f77f3ffa70 Remove duplicated Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX 9 years ago
Scott Lahteine 19fe93a5a9 Clean up configs for Z_MIN_PROBE_REPEATABILITY_TEST 9 years ago
Scott Lahteine 71a7408012 Merge pull request #4106 from thinkyhead/rc_temp_compile_err
Fix compile error with watch_bed_next_ms
9 years ago
Scott Lahteine dcb8ec32ee Fix compile error with watch_bed_next_ms 9 years ago
Scott Lahteine 3996242e9d Allow Z_MIN_PROBE_REPEATABILITY_TEST solo 9 years ago
Scott Lahteine 26a9cd0b08 Move run_z_probe to earlier block 9 years ago
Scott Lahteine 7f8a2025af Move raise_z_after_probing into earlier block 9 years ago
Scott Lahteine 2530371516 Always disable probe at the end of G29 9 years ago
Scott Lahteine 6aba98e470 Comment on setup_for_endstop_move 9 years ago
Scott Lahteine 04e88d008e Clear up ordering in G30 9 years ago
Scott Lahteine ed75b0ea11 Make clean_up function available for probes 9 years ago
Scott Lahteine 51d52cb52a Make run_z_probe available for any bed probe 9 years ago
Scott Lahteine f6b09cf465 Always use deploy/stow for dock_sled 9 years ago
Scott Lahteine 3b457c2dd3 Use deploy/stow with FIX_MOUNTED_PROBE too 9 years ago
Scott Lahteine 7e9d4a68d4 Always raise Z (if needed) for servo deploy/stow 9 years ago