Changwoo Ryu
7b14953c99
Fix build on Sanguino based boards with ATmega1284P
13 years ago
Daid
286d5003fa
Fixed compiler warning for Sanguino compile
13 years ago
ErikZalm
66d50562b6
Merge pull request #76 from iXce/Marlin_v1
...
Fix Makefile
13 years ago
Erik van der Zalm
27f595a444
Changed version => RC2
13 years ago
Erik van der Zalm
018c567abf
Moved SLOWDOWN function. (jetty840)
...
Included AD595 calibration options. (daid)
13 years ago
Erik van der Zalm
4fbda5c3f5
Merge remote-tracking branch 'daid/Marlin_v1' into Test
13 years ago
Erik van der Zalm
ce714fe306
Fixes in pins.h
13 years ago
Erik van der Zalm
35e57bf149
Added gen6 deluxe.
13 years ago
Erik van der Zalm
84ea2d61e8
Moved gen7 boards to motherboard type 10, 11 and 12.
...
Split ramps1.3 in Sprinter like config and multiextruder config.
13 years ago
Guillaume Seguin
adc108d79e
Correctly build the produced applet/Marlin.cpp source
13 years ago
Erik van der Zalm
5aa9c41ab1
Changed comment mode for detection.
...
Added M221 extuder multiply factor.
13 years ago
Erik van der Zalm
00690f7ffd
Fix cast warning in Gen7
13 years ago
Erik van der Zalm
01d28c18ab
Fixed casting warning in sanguino
13 years ago
Blair Thompson
2fd8c248fe
Added Fan control to the pre-heat settings.
...
I find that the PID routine works better when the cooling fan is switched on
at the beginning of a warm up routine. Otherwise when you enable the fan
just before a print, you have a delay as the PIDre-adjusts.
This should also be safer as most cooling fans are directed at the hot -ends
thermal barrier!
13 years ago
Blair Thompson
d9f2f509d5
Added new menu items under the prepare submenu.
...
Instead of a single pre-heat, now there is pre-heat ABS and PLA options
Added defines to the configuration file to adjust preheat temperatures for both
13 years ago
Erik van der Zalm
ae3e7586c6
Added HOME_POS. This adds the posibility to make the center 0
...
Updated the Xsteps ... settings via the LCD menu
13 years ago
Erik van der Zalm
df1437bd86
Changed display format for some numbers.
13 years ago
Erik van der Zalm
8816ef1c64
Small fixes after merge
13 years ago
Erik van der Zalm
d298dd121f
merged SBUBA82 and Justblair
13 years ago
Erik van der Zalm
2cc9a89830
Merge remote-tracking branch 'SCUBA82/Marlin_v1' into Marlin_v1
13 years ago
Erik van der Zalm
a0a1f81913
various changes
13 years ago
Christian Thalhammer
8a8ea50f33
fixed manual axis movement lcd option
13 years ago
Blair Thompson
b976692d0f
Removed VS project files for tidyness stakes
13 years ago
Blair Thompson
fe940a142d
Added a structure that will allow easy translations/modifications to the LCD menu.
...
Signed-off-by: Blair Thompson <mail@justblair.co.uk>
13 years ago
Christian Thalhammer
b3fb09a20c
change preheat to ABS values of nozzle 227 and be 105 °C
...
next try for manual axis movement
13 years ago
Blair Thompson
a05a261b72
Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich
...
that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card
13 years ago
Blair Thompson
1b6765ed12
Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface
13 years ago
Christian Thalhammer
1ff99ae25f
ATMega1284P support for Arduino IDE
...
replace $ARDUINO_HOME/hardware/tools/avr/etc/arduino.conf with this file
13 years ago
Christian Thalhammer
e661578c84
support for GEN7 1.1,1.2 and 1.3
13 years ago
Daid
73344e69c1
Added temperature offset/gain settings for AD595.
13 years ago
Christian Thalhammer
d309565b56
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
13 years ago
Christian Thalhammer
0e3631ff4b
smaller changes
13 years ago
Erik van der Zalm
fa2e1be0ca
changed default EXTRUDE_MINTEMP to 170.
13 years ago
Erik van der Zalm
7699f250e3
Fixed small merge bug
13 years ago
Erik van der Zalm
11518a987f
merged with triffid fork
13 years ago
Erik van der Zalm
13e185d330
removed unused HEATING_EARLY_FINISH_DEG_OFFSET
...
Simplified stepper inactive time
13 years ago
Erik van der Zalm
b58eae7657
Corrected e-length calculation in planner
13 years ago
daid
2a77c84c8f
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
13 years ago
Erik van der Zalm
d47a3e5950
Changed check i mtion_conrol
...
if (millimeters_of_travel == 0.0) => if (millimeters_of_travel < 0.001)
(thanks mooselake)
13 years ago
Erik van der Zalm
f87c80889f
Fixed M109 timer overflow (reported by triffid)
13 years ago
Erik van der Zalm
154de69c02
Print configuration.h version during startup (thanks hairykiwi)
13 years ago
Erik van der Zalm
6ef8459494
Corrected distance calculation. (thanks jv4779)
13 years ago
Erik van der Zalm
598eb1d4f1
Fixed compilation for gcc-4.6.2 with avr-lib-1.8.0 (thanks daid)
13 years ago
Erik van der Zalm
9173a5713b
Teensylu support.
13 years ago
Erik van der Zalm
da040fd393
Fixed ultimaker heater 1 pins. (Thanks daid)
13 years ago
Erik van der Zalm
bdb70c0509
Warning for 10k thermistor
13 years ago
Erik van der Zalm
5113513cb2
RC 1
13 years ago
Erik van der Zalm
d8a0c6450f
Split the configuration file in two parts.
...
One for common settings.
One for advanced settings.
13 years ago
Christian Thalhammer
4cc8e37bf1
lcd menue "move_axis" added
13 years ago
Christian Thalhammer
b5fae1104b
fixed sUICIDE_PIN disable
13 years ago