Commit Graph

4447 Commits (2eca8d63b36f253c892f3f4320091c825d425ebc)
 

Author SHA1 Message Date
Scott Lahteine 4b204da3c1 Cleanup of pins_RAMPS_13.h
Scott Lahteine 536f86e896 RigidBot CONTROLLERFAN_PIN in Configuration_adv.h
Scott Lahteine f068e46661 RigidBoard include for pins.h
Scott Lahteine 9ebcae496d RIGIDBOARD / RIGIDPANEL
Scott Lahteine c3c605c658 Move note about LiquidTWI2 to Configuration.h (PR#2406)
Richard Wackerbarth 3b769753eb Merge M11 fixes (PR#2394)
Scott Lahteine 4e9d658141 Prevent a hanging SERIAL_ECHO_START in M111
Scott Lahteine bc0fdbe88e Use SERIAL_EOL in SERIAL_PROTOCOLLN macros
Scott Lahteine d78ebbc0e9 Remove unused MSG_OK_B and MSG_OK_T
Scott Lahteine 6b494c1535 Use disable_all_heaters in M111
Scott Lahteine 15190d40df Add extra EOL after M111
AnHardt 0e1cf78f5c Remove code for testing if probing range is too small (PR#2390)
becaue it is over-restrictive and superseeded by the now working tests
if the probe-recktangle can be reached. See iss#2366
AnHardt d421f5250d Correct the sign of zprobe_zoffset for G29 (PR#@391)
Sign flipped with .
See also comments
https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355
and following.
Scott Lahteine 52fcc743ab Replace "target" with "destination" in M600 (PR#2374)
- Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being
used as the index into the `destination[AxisEnum]` array.
Scott Lahteine a5033c3652 Enable LCD_PIN_RESET if it exists (PR#2375)
AnHardt 23c8c5348f Z-height fix V2b (PR#2351)
here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are
replaced with `zprobe_zoffset`.
Todd Swindoll a111fbbd0a z-probe offset fix (PR#2361)
verified via 1.0.2 tag that compiles by multiple people,
credit for the fix goes to paulusjacobus for the initial find and
sniffle for the correction so M851 works.
AnHardt dae4eb36ad Add MagoKimbra to the list of contributors (PR#2356)
in Development
AnHardt 2c1414f81f Reactivate tests for more extruders in Travis (PR#2348)
BOARD_ULTIMAKER was not the default any more
- sed failed to change the board
- RAMPS_EFB has no second extruder
- ...
- Added test for bed

Rebased.
Richard Wackerbarth 316469e76a Clean up comments and spacing
Scott Lahteine 42465ee444 Cleanup of comments & spacing
Scott Lahteine 9682ed455e Fix comment on M83, add comment to prepare_move
Richard Wackerbarth 8c760f1c31 Modify Travis build to use IDE 1.6.4
Richard Wackerbarth cfb416fda9 Merge branch 'PrepareForIDE1.6' (PR#2306)
Richard Wackerbarth 9643e6c744 Make the platform.local a bit more generic
Richard Wackerbarth 4683645036 Vendor (Marlin) files
Richard Wackerbarth efd5658e32 library - SPI
Richard Wackerbarth 9b13e60e38 core - AT90USB…
Richard Wackerbarth 907032616e core - arduino
Richard Wackerbarth e2f2458928 library - Liquid Crystal
Richard Wackerbarth d8785ffc6f library - TMC26x Stepper
Richard Wackerbarth ae9de515b8 library - L6470
Richard Wackerbarth 363d7c505f library - Wire
Richard Wackerbarth 7592bb1f2f library - U8glib upgrade to v1.17
Richard Wackerbarth deea00dde3 library - U8glib
Richard Wackerbarth 1fd335b702 Bootloaders
Richard Wackerbarth bf629cf7b1 Have Travis Get additional information from the git repository
Travis builds from a detached head.
We need to use the current branch so that versioning works properly
Scott Lahteine bb44fe17cf Fix typo in buzzer.h endif (PR#2337)
AnHardt 36746143a1 Correct output of M48 (PR#2336)
n_samples is an uint8_t .
Got printouts like:
50 of 2  ...
Richard Wackerbarth 47b78ed1af Merge Implement M110 (PR#2327)
Scott Lahteine f6ca5a8da8 Allow "M110 N123" without a checksum
Scott Lahteine aaad65ff5d Include a comment documenting M110
Scott Lahteine 862c72b030 Put the mandatory test of gcode_N first
Scott Lahteine 30976f9773 Allow M110 to handle a second N argument
Scott Lahteine d135b15bb8 Init all endstop bits to 0 (PR#2332)
Richard Wackerbarth e09abb1b31 Merge Fix M600 (PR#2301)
Scott Lahteine 5ccb1c9e7d Use millis for M600 audio feedback interval
Scott Lahteine fb16a83b8a Cleanup M600 documentation comments
Scott Lahteine 97ec224d72 Replace target with destination in M600
Scott Lahteine 4ce9ddbb74 Check the temperature before filament change