5550 Commits (21ee0612e337bbb16ca532f25c016d918efba22d)
 

Author SHA1 Message Date
whosawhatsis 78e7654601 Keep FWRETRACT values in terms of millimeters when using M200
for volumetric E units
11 years ago
whosawhatsis 3f6d44d40b Keep FWRETRACT values in terms of millimeters when using M200 for volumetric E units 11 years ago
Cylindric 363dc2f0e8 Merge branch 'Marlin_v1' into update_menu_plan 11 years ago
nothinman 5f797ca29f Updated Polish, changed default firmware URL to Marlin. 11 years ago
nothinman 1a6d21bb60 Merge pull request #761 from Cylindric3D/localisation
Move strings in ultralcd.cpp into language.h.
11 years ago
Mark Hanford 0778f5f028 Add missing entries to the new Aragonian language. 11 years ago
Mark Hanford 54bab3e0d0 Merge branch 'Marlin_v1' into localisation
Conflicts:
	Marlin/language.h
11 years ago
nothinman b18b40feff Merge pull request #760 from danielmartinez/aragonese_trans
Aragonese translation
11 years ago
Mark Hanford bdd0211aeb Move strings in ultralcd.cpp into language.h. 11 years ago
Daniel Martinez c8e5a82d49 keep English as default lang. 11 years ago
Daniel Martinez f64592e362 Add Aragonese translation 11 years ago
ErikZalm ac74f45dc0 Merge pull request #752 from MatixYo/patch-3
Update language.h
11 years ago
ErikZalm 8ebcc9dc3a Merge pull request #748 from wolfmanjm/add/azteegx3pro
Add/azteegx3pro
11 years ago
nothinman 19530c9945 Revert "Merge pull request #756 from danielmartinez/aragones"
This reverts commit 6f76066ab3, reversing
changes made to e1ae7952eb.
11 years ago
nothinman 6f76066ab3 Merge pull request #756 from danielmartinez/aragones
Add Aragonese translation
11 years ago
Daniel Martinez 8b67f6f3e8 Add Aragonese translation 11 years ago
MatixYo 36086d3ca4 Update language.h
Updated Polish translations.
11 years ago
Cylindric 1781031f2d Update LCD Menu Tree with current options, based on ultralcd.cpp and language.h. 11 years ago
Jim Morris d485988bec fix typo 11 years ago
Jim Morris 8a1fd25363 Default is to not define digipot_i2c 11 years ago
Jim Morris 5097c57d3a Added pins for Azteeg X3 Pro under motherboard 68 11 years ago
Jim Morris b819fc53ca Add Azteeg X3 Pro as motherboard 68
Add digipot i2c control for MCP4451
Allow M907 to set i2c digipot currents in amps
Fix Makefile to allow Azteeg motherboards
Fix Makefile to allow Wire libraries only
Add beeper pin for Azteeg X3 Pro
11 years ago
ErikZalm e1ae7952eb Merge pull request #743 from Opticalworm/Marlin_v1
Improved support for panelolu2 encoder and buzzer
11 years ago
ErikZalm 1cc9212c05 Merge pull request #744 from drf5n/watts
Heater wattage reporting for M105 using EXTRUDER_WATTS and BED_WATTS
11 years ago
David Forrest a5f53f0cf3 Heater wattage reporting for M105 using EXTRUDER_WATTS and BED_WATTS 11 years ago
Ronald c2b3e88787 Changed 1284p fuse setting for Arduino_1.x.x
- Remove the two version of 16mHz. Crystal and resonator use the same
fuse setting. Also, Arduino IDE only showed the first one 16Mhz as a
board option.

- Added 20Mhz board option.

Symptoms for incorrect fuse setting:
- X axis move in one direction
- limit switches fail to trigger
- unable to reprogram the device via bootloader
- stops working when the reset switch is pressed.
- device fails to bootup when power by a slow raise power supply.

Solution:
- Disabled the jtag
- set the correct clock selection bit
- set the correct bootloader memory size
- enable brown-out setting
- enable clock power up delay
11 years ago
Ronald 8d162e5bd7 Improved support for panelolu2 encoder and buzzer
I added #define for LCD_FEEDBACK_FREQUENCY_HZ and
LCD_FEEDBACK_FREQUENCY_DURATION_MS  which is used to alter the default
buzzer sound.

When selecting Panelolu2 in configuration.h:
- it automatically sets the correct ENCODER_PULSES_PER_STEP and
ENCODER_STEPS_PER_MENU_ITEM.
- if LCD_USE_I2C_BUZZER is defined it will also set the default
LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS

When selecting the sanguinololu 1284p the following is true:
- its now enables  LARGE_FLASH
- It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is
defined
11 years ago
ErikZalm 430dcb65a7 Merge pull request #740 from whosawhatsis/M200
Change diameter code to 'D'
11 years ago
ErikZalm 3ec0d110bd Merge pull request #741 from Opticalworm/Marlin_v1
Changed 1284p fuse setting for 8, 16 and 20 Mhz
11 years ago
Ronald f303129fb6 Changed 1284p fuse setting for 8, 16 and 20 Mhz
Symtopns:

- X axis move in one direction
- limit switches fail to trigger
- unable to reprogram the device via bootloader
- stops working when the reset switch is pressed.
- device fails to bootup when power by a slow raise power supply.

Solution:
- Disabled the jtag
- set the correct clock selection bit
- set the correct bootloader memory size
- enable brown-out setting
- enable clock power up delay
11 years ago
whosawhatsis b2c11ba980 Change diameter code to 'D'
For some reason that I can’t figure out, the decimal is dropped when
using ’S’ for the code.

Also some minor code improvements to M200.
11 years ago
ErikZalm a864d9d4ab Merge pull request #738 from whosawhatsis/Marlin_v1
Group hardware files for Arduino 1.x.x into hardware folder
11 years ago
whosawhatsis 28aca76c4d Group hardware files for Arduino 1.x.x into hardware folder 11 years ago
ErikZalm 61059385a3 Merge pull request #737 from whosawhatsis/M200
M200 implementation
11 years ago
whosawhatsis 856edfcc0d Fixed math
This is why I wanted to sleep on the code I wrote while falling asleep
rather than immediately submitting a pull request.
11 years ago
ErikZalm 0d81ae77bc Merge pull request #727 from drf5n/oversampling
temperature.cpp: Actually use OVERSAMPLENR in the oversampling calculation.
11 years ago
ErikZalm 84df13f7d1 Merge pull request #721 from drf5n/lcdOnly
Enable basic ULTRA_LCD screen w/o encoders and menus.
11 years ago
ErikZalm 4c7e9502ad Merge pull request #718 from drf5n/temptableRes
createTemperatureLookupMarlin.py: Add resolution comments and format for...
11 years ago
ErikZalm 652a0f6b5a Merge pull request #717 from drf5n/tpins2
fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/...
11 years ago
ErikZalm 96a0cdc541 Merge pull request #716 from drf5n/maketeensy
Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HAR...
11 years ago
whosawhatsis d24df7af2c M200 implementation 11 years ago
David Forrest f0b8d5ba3d createTemperatureLookupMarlin.py: Change comment to refer to actual program name. 11 years ago
David Forrest 50f44d9249 createTemperatureLookupMarlin.py: Truncate to short after application of OVERSAMPLENR for improved resolution. 11 years ago
David Forrest f5b5dd8038 createTemperatureLookupMarlin.py: Add output of Steinhart-Hart coefficients. 11 years ago
David Forrest 76cf07c3f7 Configuration.h: Use OVERSAMPLENR in dT_PID definition. 11 years ago
David Forrest 476c7193d8 temperature.cpp: Use OVERSAMPLENR in oversampling calculation. 11 years ago
nothinman adbf226de1 Merge pull request #726 from DanLipsitt/patch-1
Format README.md with subsections
11 years ago
Dan Lipsitt 5bf73b86ff Format README.md with subsections
Having actual section headers instead of just bold text makes those parts of the document individually linkable.
11 years ago
ErikZalm 9b2576e5de Merge pull request #725 from whosawhatsis/Marlin_v1
Fix bugs in Extruder Runout Prevention, including DAMAGING HEAD CRASH
11 years ago
whosawhatsis f08bb8bb6a Previous commit borked. 11 years ago