280 Commits (12a3975341978566e4447a0abaa049010e371247)

Author SHA1 Message Date
Scott Lahteine 0cb1029311 remove extra plan_buffer_line 10 years ago
Scott Lahteine b97a950f53 Apply fix for M600 filament change
- Patch from #1453 for delta movement plan
- Fix: Set X with code X instead of adding to X
10 years ago
Scott Lahteine 9dc5de6166 Hide code that makes veteran geeks go "aha!" 10 years ago
Scott Lahteine bd387068bb Apply loops for extruders elsewhere also 10 years ago
Scott Lahteine 4a146d584b Loop, since the pending feature can use an array 10 years ago
Scott Lahteine bca884bf72 Realized it's not a bug, but cleanup code anyway 10 years ago
Philip Schell fb7c636ecf Avoid compiling error
Only a missing ","... now it will compile again
10 years ago
Scott Lahteine 073c59c50a Clean up some formatting
- Also partial cleanup of Marlin_main.cpp with a smidgen of Doxygen.
10 years ago
Scott Lahteine 093fedfde8 Make EEPROM storage consistent
Update ConfigurationStore to always write dummy values for disabled
options, including FWRETRACT, DELTA, and SCARA. Update the EEPROM
version to “V15.” Also fixes a buffer overrun with axis_scaling in
Config_ResetDefault.
10 years ago
AnHardt 59315330dd Remove definition of VERSION_STRING and replace where usend with STRING_VERSION 10 years ago
MagoKimbra 986e723eeb Add 4th extruder 10 years ago
daid 53f971095d Revert "Reduce PROGMEM warnings" 10 years ago
Bo Herrmannsen 5151db5c2f Merge pull request #1349 from msutas/patch-2
Improvement - G29 Option for Not Retracting Servo
10 years ago
Bo Herrmannsen ab074dac17 Merge pull request #1344 from grob6000/independent_pid
Independent PID parameters for each extruder
10 years ago
Bo Herrmannsen d4a665694a Merge pull request #1350 from odewdney/Development
Reduce PROGMEM warnings
10 years ago
msutas 3a5a6f42fb Corrected the ABL grid option
G29 E was not retracting the probe on the last probe point when used with ABL grid. Corrected.
10 years ago
odewdney 538859669d Removing compiler warnings for progmem 10 years ago
grob6000 bf2c923db5 Make multiple PID parameters a config option
* Adds config parameter `PID_PARAMS_PER_EXTRUDER` - allows single PID
parameters to be used where this would be preferable (e.g. dual
identical extruders)
* When disabled, will use `float Kp, Ki, Kd, Kc;` as before.
Preprocessor macros used to switch between.
* ultralcd.cpp defines extra menus for extra parameters only where
required
* M301 reports `e:xx` only if independent pid parameters enabled
* EEPROM structure still leaves space for 3 extruders worth, when undef
will save single parameter to all extruder positions, but only read the
first
* Switching off saves approx 330 B with no LCD enabled, 2634B with LCD
(RRD) enabled: this is significant.
* LCD modifications should be tested.
10 years ago
msutas e0beb98fd3 Improvement - G29 Option for Not Retracting Servo
This change introduces an improvement to G29 command on Marlin.

Auto bed leveling operation's reliability is based on the repeatability of the Z-probe switch and the servo. This change introduces an option to G29 command. When the G29 command is sent with an "e" option, during auto bed levelling the servo is not retracted between probes which decreases the bias on auto bed levelling resulting from servo.

G29 command does the auto bed probing as it is.

G29 E command engages the servo on first probing point, probes all points and retracts the servo after probing the last point.

Please comment your opinions, test on your printer and check the code on a programmer's perspective. (I am not a good programmer.)
10 years ago
grob6000 37c7e8300f Independent PID parameters for each extruder
* Variables Kp, Ki, Kd, Kc now arrays of size EXTRUDERS
* M301 gains (optional, default=0) E parameter to define which
extruder's settings to modify. Tested, works with Repetier Host's EEPROM
config window, albeit only reads/updates settings for E0.
* All Kp, Ki, Kd, Kc parameters saved in EEPROM (version now v14), up to
3 extruders supported (same as Marlin in general)
10 years ago
Erik van der Zalm 1aade4a8e2 Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Development 10 years ago
Erik van der Zalm 8a2e84e3f1 Possible fix for FWRETRACT with 0 zlift. 10 years ago
Erik van der Zalm 3a30d45c2e Revert "issue 968 for dev branch" 10 years ago
Dan Royer 9472bbe51d issue 968 for dev branch
try, try again.

If 'OK' is garbled on sending PC won't receive it.  Both machines will
wait on each other forever.  This resends OK if nothing is heard from PC
for a while to avoid this bad case.
10 years ago
Bo Herrmannsen a18b625534 Merge pull request #1261 from wgm4321/Development
Add Filament menu and add Filament/Retract settings to config store.
10 years ago
bkubicek d02daec08f fixed compilation 10 years ago
Bernhard Kubicek f24c5d82e3 Update Marlin_main.cpp
fixed minor typo
10 years ago
Wurstnase 8a6f098cc6 Expand manage_inactivity #1264
void manage_inactivity(bool ignore_stepper_queue=false)

standard is false so it is not necessary to change additional code. this
change should be better, hopefully nophead like this :)
10 years ago
Wurstnase d1995aec7a Rename ignore_blocks_queued
more speaking name
10 years ago
Wurstnase 4122de9d17 change filament issue
make a more general solution
10 years ago
wgm4321 cb12161191 Add Filament menu and add Filament/Retract settings to config store. 10 years ago
fmalpartida ec33df0554 Merge branch 'SAV-MkI_merge' into Development
Tested for SAV MKI and SAV 3D LCD on lewihe.
10 years ago
alexborro 3afe66bb0c Fix issues #1248, #1240
- Fixed issue when BAL area probing is shorter than it should be for
grid probing
- Warning when BAL activated with Delta Kinematics
- Fix XY_TRAVEL_SPEED when homing Z axis
10 years ago
Lukas Obermann 9eb6df17a7 Consider negative Z Offsets when auto bed leveling is active 10 years ago
Denis Chertykov 050ca9ca13 Move initialization of errormagic[] and echomagic[] to Marlin_main.cpp 10 years ago
alexborro d74aabf259 Revert "Change Auto_Bed_Leveling to Auto_Bed_Compensation" 10 years ago
Bo Herrmannsen 60628864ca Merge pull request #1167 from thinkyhead/sd_freemem
Use SdFatUtil::FreeRam() for freeMemory() if there
10 years ago
Bo Herrmannsen 889d7ba218 Merge pull request #1177 from martin-pr/probing_z_speed
Split do_blocking_move() to XY and Z sections
10 years ago
Bo Herrmannsen 5e7bd2dc87 Merge pull request #1200 from chertykov/Marlin_v1
Fix syntax errors in #ifdef
10 years ago
Denis Chertykov b086394178 Fix syntax errors in #ifdef. 10 years ago
John Davis 4315c2547a Update Marlin_main.cpp
Changed level and leveling to compensation (except with "verbose_level" and "lcd_reset_alert_level").
10 years ago
Bo Herrmannsen 03e489aaad Merge pull request #1197 from foosel/fix/issue_1147
Fixes commands not being acknowledged in the same order they are received in
10 years ago
Gina Häußge acc0e75279 Fixes commands not being acknowledged in the same order they are received
in

G0 to G3 were previously acknowledged in the get_command method, causing
them to be possibly acknowledged before commands coming after them that
were acknowledged in process_commands.

This patch fixes this, moving the acknowledgement of G0 to G3 to the
process_commands method as well. These commands are therefore no
longer acknowledged when the enter the cmd_buffer but instead only
acknowledged when the enter the plan_buffer.

Guaranteeing that commands are acknowledged in the same order in which
they were received by the firmware allows host software to be able to
track the life cycle of commands and such a better management of the
firmware's serial buffers as well as better internal command processing
and response parsing without having to depend on throwing an epic
amount of regular expressions against each line received back from the
firmware.

Fixes ErikZalm/Marlin#1147
10 years ago
Scott Lahteine 07c6b5ab71 Using axis constants 10 years ago
Scott Lahteine 0450e83fa5 Use SdFatUtil::FreeRam() for freeMemory() if there 10 years ago
Scott Lahteine 60598b4cdd A few constants where they belong 10 years ago
Martin Prazak 2ef0669b19 Split do_blocking_move() to XY and Z sections to make sure that the Z homing feedrate is not exceeded 10 years ago
Neil Darlow 64139f5e5a Merge https://github.com/ErikZalm/Marlin into Marlin_v1 10 years ago
Scott Lahteine 7562183efc Skip over spaces first 10 years ago
Scott Lahteine 12b51d6060 Ignore S and P if no value >0 is included. 10 years ago