3403 Commits (0b8ef5eba65e8262642100425ee6b43e6e10b58d)

Author SHA1 Message Date
Blue-Marlin 3166aed087 Improve the descriptions for THERMAL_PROTECTION 9 years ago
Scott Lahteine a02ae36ae8 Include M65 "ABC" parameters in EEPROM
Addressing #2773
9 years ago
Scott Lahteine cf7c444aff Apply unknown_position_error elsewhere 9 years ago
Scott Lahteine eda5190581 Check for known position in `M48` 9 years ago
Scott Lahteine 68085ca855 Updated M48 friendly for DELTA
Partial implementation with reference to MarlinFirmware/Marlin#3011
9 years ago
Scott Lahteine 6a3529247f "Homing" as a translatable string 9 years ago
Scott Lahteine c97c2dcaf7 Use const parameters instead of static casting
Alternative fix to #3149
9 years ago
Scott Lahteine 38b0082bf2 Additional tweaks to M42 exit conditions 9 years ago
Scott Lahteine 4bbea5124d Support for multiple PWM fans 9 years ago
Scott Lahteine 637cc03686 Fix M109 so it won't wait for cooling
Addressing issue #2767
9 years ago
AnHardt 3f45a1acf9 Check probes only when deployed
Aim: Test probes in update_endstops only when activated

Changes:
Configurations
 Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message.
 Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin
 Add some comments
 Shift some entries to have related things together.

Conditionals.h
 We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined.

SanityCheck.h
 Add some tests if the probe is connected and if we have defined a probe.

stepper.cpp
 Changes to test the probe only when it is deployed (z_probe_is_active).
 Test update_endstops() when the probe is deployed.

MarlinMain.cpp
 a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled()
 b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402
 c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions.
 d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop.

 To do: In another PR. handle all probes in deploy/stow_z_probe.
 Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS.
9 years ago
Scott Lahteine 4634feaeab Merge pull request #3012 from thinkyhead/fix_command_injection
Use a serial line buffer to prevent queue corruption
9 years ago
Scott Lahteine 9bf87aac6a Merge pull request #3127 from thinkyhead/rc_core_babystepping
Implement BABYSTEPPING for COREXY and COREXZ
9 years ago
Scott Lahteine 4ae03df5c2 Merge pull request #3109 from thinkyhead/rc_host_keepalive
Provide feedback to hosts when busy
9 years ago
Scott Lahteine 963a92ceda Patch idle forevermore 9 years ago
Scott Lahteine 7ec7bb31c4 Send a Busy signal to hosts during long processes, wait for input, etc
If Marlin is blocking the serial input or command queue for any length
of time (for example more than 2 seconds), it needs to send a message
to serial out to inform the host that it is busy. Marlin should only
send these messages out when busy, and preferably not when trying to
print formatted output.
9 years ago
esenapaj 8d580ea7e8 follow-up the PR #3114
follow-up the commit d56c6af24e
9 years ago
Scott Lahteine d9e1f22682 BABYSTEPPING requires ULTRA_LCD 9 years ago
Scott Lahteine e5fd43f343 Implement BABYSTEPPING for COREXY and COREXZ 9 years ago
Scott Lahteine 80277cc9c8 drain_queued_commands_P now returns true if there are more 9 years ago
Scott Lahteine 8fe7420310 Use a separate serial line buffer 9 years ago
Scott Lahteine 7d25c107a8 Merge pull request #3149 from esenapaj/patch-1
suppress warnings
9 years ago
Scott Lahteine d56c6af24e Merge pull request #3114 from thinkyhead/rc_reverse_lcd_menu
Option to reverse the click-wheel direction in menus
9 years ago
Scott Lahteine cc291aeb3c Move definition of "blink" to main ultralcd file 9 years ago
Scott Lahteine e7e1866589 Merge pull request #3161 from Alex9779/fix_InitialExtruderDirection
Fix initial extruder direction for second/third/fourth extruder if they run inverted to the first
9 years ago
Scott Lahteine 57e82cacc9 Merge pull request #3156 from esenapaj/patch-3
Fix CardReader::lsDive()
9 years ago
Alexander Leisentritt 4338813814 save last extruder and set stepper directions too in case the extruder changed
fixes MarlinFirmware/Marlin#3144 and MarlinFirmware/Marlin#3083
9 years ago
Scott Lahteine 8f24475e02 Simplify limiting encoderLine in END_MENU 9 years ago
Scott Lahteine fbef2f5b61 Implement reverse menu direction in ultralcd.cpp 9 years ago
Scott Lahteine b8b51d8da8 Add the REVERSE_MENU_DIRECTION option 9 years ago
Scott Lahteine 999a76dbdf Merge pull request #3157 from esenapaj/patch-4
Use variable in lcd_erase_line()
9 years ago
Scott Lahteine e8fa843c2d Merge pull request #3164 from epatel/epatel/RCBugFix
Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z
9 years ago
Scott Lahteine fc04b587cf Merge pull request #3147 from thinkyhead/rc_stringify_macro
Promote STRINGIFY to macros.h
9 years ago
Scott Lahteine d7c6fd5c2f Merge pull request #3146 from thinkyhead/rc_enabled_true_false
Support "true" and "false" in the ENABLED macro
9 years ago
Edward Patel cb0dbfa3b5 Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z 9 years ago
esenapaj a15c5d222a Use variable in lcd_erase_line()
lcd_erase_line() is called with argument, but the argument is ignored by lcd_erase_line().
9 years ago
esenapaj 609c0d46d9 Fix CardReader::lsDive()
If comparison between signed char(-128 ~ +127) and DIR_NAME_DELETED(uint8_t const 0XE5, it's +229),
it makes incorrect result.
9 years ago
Scott Lahteine 2ef49a9d53 Wrap DEFAULT_Ki, DEFAULT_Kd, PID_dT
Addition to #3140
9 years ago
Scott Lahteine eb8cf29464 Merge pull request #3151 from hydrocat/RCBugFix
Uptades the pt-br translation
9 years ago
Scott Lahteine 6e1bc03d3b Additional wrapping for #3140 9 years ago
Scott Lahteine cc9968f893 Patch spacing in #3140 9 years ago
Scott Lahteine 1c384930f3 Merge pull request #3140 from thinkyhead/rc_fix_macro_expansion
Wrap macros to prevent bad expansions
9 years ago
VITORIO MIGUEL PRIETO CILIA de2cca73ac Uptades the pt-br translation 9 years ago
esenapaj a4314c4907 Use local variable in recalc_delta_settings()
diagonal_rod hadn't been used anywhere.
9 years ago
esenapaj 8de7a6f9b1 suppress warnings 9 years ago
Scott Lahteine 9418b4f2f3 Promote STRINGIFY to macros.h 9 years ago
Scott Lahteine 4b648793f2 Use ENABLED with DISABLE_[INACTIVE_][XYZ] 9 years ago
Scott Lahteine 73a59a4e45 Allow ENABLED(b) to work with "true" and "false" 9 years ago
Blue-Marlin c73f1b2471 Extend stack_overflow_protection for lcd_move_e and _lcd_level_bed
Extend stack_overflow_protection for lcd_move_e() and _lcd_level_bed() with
a refined method of 3050.
9 years ago
Scott Lahteine f4a3efd35e Merge pull request #3116 from thinkyhead/rc_fix_value_edit_bug
Fix value edit click bug
9 years ago
Scott Lahteine 3f5fbbd398 Merge pull request #3124 from jbrazio/bugfix/update-g29-auto-level-bed-topography
Update the bed topography output done by G29
9 years ago
Scott Lahteine c16c47954c Merge pull request #3141 from esenapaj2/RCBugFix
follow-up the PR #3131
9 years ago
Scott Lahteine 30c3a21d1f Merge pull request #3112 from thinkyhead/rc_support_MAX31855 9 years ago
Scott Lahteine 81d759efb6 Merge pull request #3138 from jbrazio/bugfix/m109-r-could-wait-forever 9 years ago
Scott Lahteine 2179f598bf Merge pull request #3122 from thinkyhead/rc_group_filament_change 9 years ago
Scott Lahteine 62a9b9902d Merge pull request #3133 from thinkyhead/rc_machine_uuid_in_m115 9 years ago
Scott Lahteine f928894c38 Merge pull request #3132 from thinkyhead/rc_heating_failed_err 9 years ago
esenapaj2 236a44c83b follow-up the PR #3131
follow-up the commit 7326d63ce0
update Configration_adv.h of Hephestos2
delete unnecessary spaces
9 years ago
Scott Lahteine f9ded2a7c4 Wrap macros to prevent bad expansions 9 years ago
jbrazio a645860431 All print timer related activity now uses print_job_start(), print_job_timer() or print_job_stop() 9 years ago
jbrazio 1981e53d68 M109 R option if misused could cause a wait-forever situation 9 years ago
Scott Lahteine 7976e29399 Use MACHINE_UUID in M115
Addressing #2879. The M115 report should display `MACHINE_UUID` but it
always displays `UUID`.
9 years ago
Scott Lahteine 81aab828e2 Fix a "Heating failed" error
Addressing #3085. If the target_temperature is set directly it never invokes or disables the timer set in `start_watching_heater`, so after _stopping a print_ or turning off _all heaters_ you could get a “Heating failed” error.
9 years ago
Scott Lahteine 0c48eaf3de Expose motor current in more configs, disable by default 9 years ago
Elijah Snyder e8b10d2836 Adding PWM_MOTOR_CURRENT flag to help expose PWM_MOTOR_CURRENTS in Configuration_adv.h similar to DIGIPOT_MOTOR_CURRENT 9 years ago
João Brázio 4d4a842cfb Update the bed topography output done by G29 9 years ago
Scott Lahteine 89838cdb10 Move step macros to stepper_indirection.h 9 years ago
João Brázio 793cd0ae3b Clean up the code a bit 9 years ago
Scott Lahteine 27f244ba2c Support MAX31855 as Temperature Sensor -3 9 years ago
Scott Lahteine ce639b8b03 Group FILAMENT_SENSOR options together 9 years ago
Scott Lahteine 3fd31976c3 Reduce code in stepper.cpp with macros 9 years ago
Scott Lahteine b45a0c4c60 Fix bugs in edit submenus so they return to origin
Expected behavior: After editing a value the menu should return to the
previous place with the edited item selected.
Actual behavior: Either the top (back) item from the previous screen is
selected, or the menu jumps up another level.
Solution: Pass the correct arguments to `lcd_goto_menu` on click when
editing a value.
9 years ago
jbrazio 986b508ff7 Print timer now stops when it sees the last extruder temperature being shutdown 9 years ago
AnHardt fd5414c6ea Z_RAISE_BEFORE_HOMING -> MIN_Z_HEIGHT_FOR_HOMING
rebased
corrected spelling
changed to #elif for error

Still with MIN_Z_HEIGHT_FOR_HOMING but con be done with (folder wide) search-replace when we have a better name.
9 years ago
Scott Lahteine b7928a000a Merge pull request #3108 from AnHardt/M110+
M110 and M29 rework
9 years ago
Scott Lahteine 5cba0b4187 Merge pull request #3111 from thinkyhead/rc_drop_old_condition
Drop obsolete test for leading "N"
9 years ago
Scott Lahteine 302d1bfbc4 Drop obsolete test for leading "N" 9 years ago
AnHardt 37b857e8ec M110 ang M29 rework
Add 'ok' output for G29 actually closing the file.
Handle M110 when received without linenumber/checksumm.
9 years ago
esenapaj2 29e09c7c3e update example configurations
update old comments
update or delete deprecated definitions
complement forgotten updates
adjust spacing
some cosmetic changes
9 years ago
Scott Lahteine fac85f6fa1 Merge pull request #3102 from jbrazio/bugfix-g28-multiple-z-movements
Bugfix: G28 was lifting Z-axis multiple times
9 years ago
jbrazio 642e3699ce Z-axis was being lift multiple times if Z_SAFE_HOMING was enabled and Z_RAISE_BEFORE_HOMING was greater than zero 9 years ago
Scott Lahteine 501f63802a Merge pull request #3077 from Blue-Marlin/watchdogreset-in-kill
Add Watchdog timer reset in kill()
9 years ago
Scott Lahteine 1002eb67c8 Update name of st_get_axis_position_mm in stepper.h 9 years ago
Jaroslav Škarvada 7dde761aa6 Fix MELZI_MAKR3D to use correct motherboard
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
9 years ago
Scott Lahteine eafbc5e0cc Add AJ4P pins and fix RAMBO pins 9 years ago
Scott Lahteine cf792fd8d8 Update configurations to use RAMPS 1.4 9 years ago
Scott Lahteine cacf04f8a7 Base RAMPS-like boards on RAMPS 1.4 9 years ago
Scott Lahteine 50e3482e0a Handle RAMPS 1.3 as the special case 9 years ago
Scott Lahteine 679be3294f Rename RAMPS 1.3 pins for RAMPS 1.4 9 years ago
Scott Lahteine f18d3f451a Limit LCD move_to_x/y coordinates for deltas
Related to MarlinFirmware/MarlinDev#270
9 years ago
Scott Lahteine 988332c67a Cosmetic tweaks from dev 9 years ago
Scott Lahteine 2690d8568e DOGLCD width/height in Conditionals.h 9 years ago
Scott Lahteine 614febaaf3 Fix acceleration limits
See: https://github.com/Ultimaker/Marlin/pull/7
9 years ago
Scott Lahteine 13ef12ad3f Fix power calculations
As suggested by @max-pau in #3073 - #3074
9 years ago
Scott Lahteine e2b022cce2 Include #3053 9 years ago
Scott Lahteine 5cba0210f2 Small patch to Z_SAFE_HOMING comment 9 years ago
Scott Lahteine 6165fd41a5 Fix Hephestos 2 and other configs 9 years ago
Scott Lahteine 71718d888a Fix typos in check_axes_activity 9 years ago
Lukas Abfalterer 83795d3e63 deleted double used comments 9 years ago
jbrazio 143ad74db7 Update PROBE_OFFSET_FROM_EXTRUDER comment section in all example config
files.
9 years ago
jbrazio b0f5ba0232 Update the PROBE_OFFSET_FROM_EXTRUDE comment section
This changes have being discussed at MarlinFirmware/Marlin#2849.
9 years ago
jbrazio 02b131b552 Replaced stock BQ PID values with fine tuned ones generated using M303 9 years ago
jbrazio 45dc8a51f3 Added readme file for bqh2 and disabled the SLOWDOWN config flag 9 years ago
Scott Lahteine 6a21180bd4 Implemented BQ ZUM Mega 3D board layout as an override to RAMPS 1.3 9 years ago
jbrazio b18816fcbf Fine tuned XYJERK.
Disallowed the Z_PROBE_OFFSET_RANGE_MAX to be greater than zero.
9 years ago
jbrazio be83036212 Applying suggestions by @thinkyhead at MarlinFirmware/Marlin#3049.
- Remove the forced activation of SDSUPPORT, I guess people may use the ZUM
3D board and not the LCD module.
 - Fixed the tab issue within boards.h file.
9 years ago
jbrazio b82d91eca6 Added configuration example for the BQ Hephestos 2 3D printer.
Added support for BQ ZUM Mega 3D board and stock Hephestos 2 thermistor.
9 years ago
Scott Lahteine 45bcc43e48 Don't override SOURCE_CODE_URL in Default_Version.h
- Defining `SOURCE_CODE_URL` in `Default_Version.h` overrides it
elsewhere. So don’t define it there.
- Also fix up `language.h` so no `#undef` will be needed.
9 years ago
Scott Lahteine ef68c1910c Check that the temperature is close to target 9 years ago
Scott Lahteine ea9fd1200b Fix M109 so it won't wait for cooling
Addressing issue #2767
9 years ago
Scott Lahteine e4945b30d2 sbi and cbi are deprecated 9 years ago
Scott Lahteine ff13070b59 Use _BV macros, patch up others 9 years ago
Scott Lahteine 209f5f21e0 Use macros where possible
Apply `constrain`, `NOMORE`, `NOLESS` and `CRITICAL_SECTION` macros
wherever possible.
9 years ago
Scott Lahteine c8f76bb8aa Create BITSET/BITCLR macros 9 years ago
Scott Lahteine adc25db8c4 Merge pull request #3005 from thinkyhead/rcbugfix_eeprom
Fix layout descr. in configuration_store.cpp
9 years ago
Scott Lahteine e7cf85b922 Merge pull request #3013 from thinkyhead/esenapaj-patch-1
Enhanced #3010 - formal Mesh/Manual dependency
9 years ago
Scott Lahteine 6e64895c30 Merge pull request #3001 from AlwaysTinkering/RCBugFix
Rc bug fix - Fix for issue #2931
9 years ago
Scott Lahteine 34b8b9f0f5 Merge pull request #2995 from thinkyhead/rcbugfix_corexy_corexz
Add CORE support to st_get_position_mm (and elsewhere)
9 years ago
Scott Lahteine 1e20949afb Merge pull request #3092 from thinkyhead/rc_2860_printrbot_lcd
Fix Printrboard with LCD (redo)
9 years ago
Scott Lahteine f5972c4d2c Merge pull request #2994 from AnHardt/Inerrup-save-serial
Interrupt safe serial --- Guard against non-atomic variable changes from interrupt routines
9 years ago
Scott Lahteine 3a3d358df9 Fix Printrboard with LCD (redo)
Based on #2860 - rebased for RCBugFix
9 years ago
Scott Lahteine eb85342fd9 Merge pull request #2989 from AnHardt/fix2661
Pre home display - Stepper release
9 years ago
Scott Lahteine 14f3ca1b2e Merge pull request #2978 from thinkyhead/tool_offset_abl_rcbugfix
Apply bed leveling matrix when switching extruders
9 years ago
Scott Lahteine 91fcdc2b99 Merge pull request #3090 from thinkyhead/rc_spelling
Various minor spelling corrections
9 years ago
Scott Lahteine 772460a7b8 Various minor spelling corrections
Redo of #2939 rebased against RCBugFix
9 years ago
lrpirlet 0fb507a75d correct raise_z_for_servo 9 years ago
Scott Lahteine 04a0d45c22 Merge pull request #2821 from MarlinFirmware/ReinitializeDisplay
Fix status LEDs update when reinitializing the display
9 years ago
Blue-Marlin b4e5e0f11d Add Watchdog reset in kill()
Add watchdog reset in the kill loop to simplify recovering.
9 years ago
Scott Lahteine 547d35a921 Merge pull request #3067 from Blue-Marlin/ALARM_PIN
Remove unused ALARM_PIN
9 years ago
Scott Lahteine 79778d46d9 Merge pull request #3066 from Blue-Marlin/Fix-disable_all_heaters()
Fix disable_all_heaters() for MAX6675
9 years ago
Blue-Marlin a68228bf55 Remove unused ALARM_PIN
Remove unused ALARM_PIN from all the Configuration.h's
9 years ago
Scott Lahteine 9eb4aceee4 Merge pull request #2986 from thinkyhead/enable_watchdog
Enable USE_WATCHDOG by default
9 years ago
Blue-Marlin 0631541166 Fix disable_all_heaters() for MAX6675 9 years ago
Scott Lahteine 222d13d5ed Merge pull request #3051 from thinkyhead/rcbugfix_dual_axis_offset
Code cleanup in gcode_T
9 years ago
Scott Lahteine 186629aee8 Merge pull request #3057 from jbrazio/3034-z_raise_after_probing_fix
Fix Z_RAISE_AFTER_PROBING for non DELTA printers
9 years ago
Scott Lahteine a42fb35c56 Merge pull request #3050 from Blue-Marlin/fix-1166
Temporary workaround for stack overflow
9 years ago
jbrazio 67e15aac3d As pointed out by @Blue-Marlin the previous code would raise the Z axis
twice for a servo based probe.
9 years ago
jbrazio 17cc2a9663 Z_RAISE_AFTER_PROBING value was being ignored by Marlin because
raise_z_after_probing() was only called if the printer type was set to a
DELTA or if the printer had a docking sled for the probe.
9 years ago
Scott Lahteine 252f4a75cd Merge pull request #3043 from oxivanisher/RCBugFix
Example configuration for Kossel XL
9 years ago
Scott Lahteine fd1243c184 Merge pull request #3052 from thinkyhead/rc_fix_m145_eeprom_output
Fix "M145" output in M503 report
9 years ago
Scott Lahteine 0bc648353f Merge pull request #3031 from tnw513/RCBugFix
Fix board type for Hephestos: RAMPS 1.4
9 years ago
AnHardt f27c2b6b4b Reimplement #2892
Include #2892 to fix the isHeating symbol in the extruder graphics
9 years ago
AnHardt 615bec2329 Activate warning about possible reduced accuracy by default
Renamed `WARN_REDUCED_ACCURACY` to `DISABLE_REDUCED_ACCURACY_WARNING`

Changed the condition for blinking from
```
#if ENABLED(WARN_REDUCED_ACCURACY)
```
to
```
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
```
9 years ago
AnHardt 1c889cd303 Refresh previous_cmd_ms during run_z_probe()
Refresh previous_cmd_ms during run_z_probe() to prevent:
stepper shutdown for expired DEFAULT_STEPPER_DEACTIVE_TIME
and extrudes for expired EXTRUDER_RUNOUT_SECONDS
(https://github.com/MarlinFirmware/MarlinDev/issues/238)
9 years ago
AnHardt 4b02f33e69 Distribute config-changes to the other configurations 9 years ago
AnHardt be24fdacea The same changes to the axis-letters now for the char-displays
Exactly the same - copy/paste.
9 years ago
AnHardt 5b0f659355 Changes for graphics displays
Replaced displaying "---" instead of the value of a coordinate when
unhomed or with reduced precision
with blinking the coordinate-prefix-character ('X','Y','Z').
For "unhomed" a '?' is shown every second second - until that axis is
homed. The value displayed is, as before the "---" where displayed, the
relative to the reset position coordinate value.
When the axis stepper was disabled, now we can display a hint on that,
by showing a blinking ' ' instead of the axis letter, when
WARN_REDUCED_ACCURACY is defined.

I suppose the code itself is here the better documentation.

A '+/-' character is in non of our charsets so i decided for a '?' for
now to reduce the work.
There is no additional space on the displays one could use to display
the information, so replacing something is the only option. As the axis
letters are totally redundant with their positions on the display they
contain the least information.
So my decision was to overwrite them.
9 years ago
AnHardt 32ae9f9ab7 Fix stepper shutdown during waiting for temperatures
In the wait loops of M109 M190 idle() is called, what checks
stepper_inactive_time against previous_cmd_ms.
Because we can be several minutes inside the loop, resetting
previous_cmd_ms only outside the loop caused stepper shutdowns.

The name of previous_cmd_ms does not really reflect its use. It's set
not only when a new command was received or executed but also in many of
the movement routines. For that the little extension of using it during
the wait will (hopefully) not hurt.

# Conflicts:
#	Marlin/Configuration_adv.h
9 years ago
AnHardt b6e69e71ce Make stepper shutdown after inactivity dependent
Make stepper shutdown after inactivity dependent on a new set of
#defines.
DISABLE_INACTIV_X
DISABLE_INACTIV_Y
DISABLE_INACTIV_Z
DISABLE_INACTIV_E

And make exemplaric Configuration.
Names can be discussed.

This makes the disabling of the steppers independent from the DISABLE_?
settings witch shut down the steppers immediately.
9 years ago
AnHardt 051325ccd7 Introduce axis_homed
Introduce additional variable axis_homed to replace axix_known_position
when the coordinate display should indicate the axis is not homed.
This is to distinguish between "not homed" and "inexact position possible
because stepper was disabled".

# Conflicts:
#	Marlin/ultralcd_implementation_hitachi_HD44780.h
solved
9 years ago