AnHardt
40b6edcad7
Introduce DEACTIVATE_SERVOS_AFTER_MOVE in Configuration.h
...
DEACTIVATE_SERVOS_AFTER_MOVE is ought to replace PROBE_SERVO_DEACTIVATION_DELAY.
But it will work on all servo moves, not only the probe servo moves.
10 years ago
AnHardt
2ddb2a2be9
Add Servo::move() to servo.cpp
...
move(pin, angel) - Sequence of attach(pin), write(angel),
if DEACTIVATE_SERVOS_AFTER_MOVE is defined waits SERVO_DEACTIVATION_DELAY, than detaches.
As we have jitter on the servos during moves of the steppers, and detaching them improves this behaviour,
the usual sequence to handle a servo movement is:
attach(pin)
write(angel)
delay(until the servo finished the move)
detache()
Here a function to handle the complete sequence.
10 years ago
mkile
8a01e5fb7a
Update Russian translation (PR#2443)
...
Slightly updated translation.
10 years ago
Richard Wackerbarth
e83575537a
Compiler defines USBCON for USB devices (PR#2433)
10 years ago
ayberkozgur
7268d46508
Always calculate extruder temperature PID d term (PR#2432)
10 years ago
Scott Lahteine
87a872e103
Use st_get_position_mm where possible (PR#2411)
10 years ago
Scott Lahteine
2e0da8abdc
Allow N to take a negative argument (PR@2402)
10 years ago
Scott Lahteine
447dbd6fa5
Add STEPPER_RESET_PIN support
10 years ago
Scott Lahteine
a0351bdb73
Remove STEPPER_RESET_FIX option
10 years ago
Scott Lahteine
6b1b8cb2b3
Also nullify spaces before the checksum asterisk (PR#2409)
10 years ago
Scott Lahteine
8e61314323
Use RIGIDBOT_PANEL for consistency with online docs
10 years ago
Scott Lahteine
4b204da3c1
Cleanup of pins_RAMPS_13.h
10 years ago
Scott Lahteine
536f86e896
RigidBot CONTROLLERFAN_PIN in Configuration_adv.h
10 years ago
Scott Lahteine
f068e46661
RigidBoard include for pins.h
10 years ago
Scott Lahteine
9ebcae496d
RIGIDBOARD / RIGIDPANEL
10 years ago
Scott Lahteine
c3c605c658
Move note about LiquidTWI2 to Configuration.h (PR#2406)
10 years ago
Scott Lahteine
4e9d658141
Prevent a hanging SERIAL_ECHO_START in M111
10 years ago
Scott Lahteine
bc0fdbe88e
Use SERIAL_EOL in SERIAL_PROTOCOLLN macros
10 years ago
Scott Lahteine
d78ebbc0e9
Remove unused MSG_OK_B and MSG_OK_T
10 years ago
Scott Lahteine
6b494c1535
Use disable_all_heaters in M111
10 years ago
Scott Lahteine
15190d40df
Add extra EOL after M111
10 years ago
AnHardt
0e1cf78f5c
Remove code for testing if probing range is too small (PR#2390)
...
becaue it is over-restrictive and superseeded by the now working tests
if the probe-recktangle can be reached. See iss#2366
10 years ago
AnHardt
d421f5250d
Correct the sign of zprobe_zoffset for G29 (PR#@391)
...
Sign flipped with #2167 .
See also comments
https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355
and following.
10 years ago
Scott Lahteine
52fcc743ab
Replace "target" with "destination" in M600 (PR#2374)
...
- Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being
used as the index into the `destination[AxisEnum]` array.
10 years ago
Scott Lahteine
a5033c3652
Enable LCD_PIN_RESET if it exists (PR#2375)
10 years ago
AnHardt
23c8c5348f
Z-height fix V2b (PR#2351)
...
here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are
replaced with `zprobe_zoffset`.
10 years ago
Todd Swindoll
a111fbbd0a
z-probe offset fix (PR#2361)
...
verified via 1.0.2 tag that compiles by multiple people,
credit for the fix goes to paulusjacobus for the initial find and
sniffle for the correction so M851 works.
10 years ago
Scott Lahteine
42465ee444
Cleanup of comments & spacing
10 years ago
Scott Lahteine
9682ed455e
Fix comment on M83, add comment to prepare_move
10 years ago
Scott Lahteine
bb44fe17cf
Fix typo in buzzer.h endif (PR#2337)
10 years ago
AnHardt
36746143a1
Correct output of M48 (PR#2336)
...
n_samples is an uint8_t .
Got printouts like:
50 of 2 ...
10 years ago
Scott Lahteine
f6ca5a8da8
Allow "M110 N123" without a checksum
10 years ago
Scott Lahteine
aaad65ff5d
Include a comment documenting M110
10 years ago
Scott Lahteine
862c72b030
Put the mandatory test of gcode_N first
10 years ago
Scott Lahteine
30976f9773
Allow M110 to handle a second N argument
10 years ago
Scott Lahteine
d135b15bb8
Init all endstop bits to 0 (PR#2332)
10 years ago
Scott Lahteine
5ccb1c9e7d
Use millis for M600 audio feedback interval
10 years ago
Scott Lahteine
fb16a83b8a
Cleanup M600 documentation comments
10 years ago
Scott Lahteine
97ec224d72
Replace target with destination in M600
10 years ago
Scott Lahteine
4ce9ddbb74
Check the temperature before filament change
10 years ago
Jaime van Kessel
b8b5762e55
Update Ultimaker URL
10 years ago
Jaime van Kessel
d5bfbf5a59
Added correct dutch translation for calibrate.
10 years ago
Scott Lahteine
149c474e55
Updated Russian language (PR#2325)
...
Gleaned from
https://github.com/MarlinFirmware/Marlin/commit/4ac14a7e5fa8e6e395436664
8976eafd1ae220ae
10 years ago
AnHardt
722829b058
Move buzzing code to buzzr.h & buzzer.cpp (PR#2307)
...
at least the lcd independent part from Marlin_main.cpp.
10 years ago
AnHardt
c461975140
Rename and repair MELZI_1284 (PR#2301)
...
to MELZI_MAKR3D.
Fix for #2288
As the normal MELZI also can have a 1284.
10 years ago
schlotzz
1e9cf905c7
Enable ZigZag AutoBedLeveling on Deltas (PR#2273)
...
ZigZag has been disabled by fault due to do_topography_map
10 years ago
Scott Lahteine
ec93383ec8
Add SanityCheck for bed probe position settings (PR#2282)
10 years ago
Scott Lahteine
dc40a5f6e0
Patch up more outdated config lines
10 years ago
Scott Lahteine
98c9111a7d
Update delta configs with latest settings
10 years ago
Scott Lahteine
e6baf8afd9
Fix up allen key settings in delta configs
10 years ago
Scott Lahteine
3b293fc5d1
Move Delta settings lower in delta files
10 years ago
Scott Lahteine
df21857583
Move extruder offset settings next to extruders setting
10 years ago
Scott Lahteine
2dd1859247
Cleanup spaces and comments in configs and conditionals
10 years ago
Scott Lahteine
a274769f4f
Clean up spacing and comments
...
Also clean up some trailing spaces in a few other sources
10 years ago
Scott Lahteine
d3bce05d54
Fix up spacing for filament sensor values
10 years ago
Scott Lahteine
b4b10a57fe
Fix configurator section directives and values lists
10 years ago
Scott Lahteine
bba14dcbe6
Move Z Safe Homing point to the middle of the movement range
10 years ago
Scott Lahteine
318318b02f
Add pins_RAMPS_13_EFB.h to reduce redundancy
10 years ago
Scott Lahteine
346c8b339b
Remove a test from pins_RAMPS_13.h
...
- Add 3 new lines to `pins.h` to remove 2 redundant tests in
`pins_RAMPS_13.h`
10 years ago
AnHardt
b93cddfcc9
Add lost MKS_BASE to pins.h (PR#2297)
10 years ago
AnHardt
6ab7b560af
Rework buzzing (PR#2296)
...
by:
Moving HAS_LCD_BUZZ macro to Coditionals.h
Renaming HAS_LCD_BUZZ to HAS_BUZZER to make clear is has nothing to do with the lcd.
Removing the ULTRALCD condition.
Moving declaration of lcd_buzz() out of the ULTRA_LCD block in ultralcd.h
Moving definition of lcd_buzz() out of the ULTIPANEL block in ultralcd.cpp
Renaming lcd_buzz() to buzz() to make clear is has nothing to do with the lcd.
All buzzing code is now only dependent on the existence of a BEEPER-pin or the definition of a LCD_USE_I2C_BUZZER.
To do: Check the conditions for the BEEPER-pin in all pin-files.
10 years ago
Scott Lahteine
29122db2fa
Fix ULTRA_LCD spelling in HAS_LCD_BUZZ
10 years ago
Scott Lahteine
1d94d098bf
Formatting tweaks as part of fixing issue 1497
10 years ago
Scott Lahteine
e602c28ad9
Set auto fan pins to OUTPUT during init
...
Fixes the problem of these pins being left in INPUT state, as described
in #1497
10 years ago
Scott Lahteine
90f858aa85
Use translated strings for axis movement (PR#2280)
...
Suggest we use the translated strings here. They use (except for
German) the phrasing “Move X” instead of just the axis letter, but they
should fit the available space. The “Extruder” string would be the
same, except it will be translated.
10 years ago
Scott Lahteine
e2a4a83586
Don't re-apply Z_RAISE_BETWEEN_PROBINGS in probe_pt (PR #2281 )
10 years ago
Scott Lahteine
6b1b3adaf0
Consistent punctuation in SanityCheck errors (PR#2283)
10 years ago
MagoKimbra
eb81982fcd
Fix error next command in autotune (PR#2274)
...
Now send only temperature for T or B, but not send OK.
Host interprets the line to show the right temperature, but not in
response to M105 then stop and send commands until it ends the autotune.
10 years ago
AnHardt
55b23c896a
Optimise out_of_range_error() (PR#2265)
...
by avoiding the strncopy()
10 years ago
filipmu
b0860adab6
Fix volumetric multiplier display for filament sensor (PR#2264)
...
The volumetric multiplier display needs to be multiplied by 100 in order to make it an integer for display purposes.
10 years ago
AnHardt
45642b7fe8
Respect DISABLE_AXIS settings (PR#2216)
...
when DEFAULT_STEPPER_DEACTIVE_TIME is over
instead of simply turn off all.
10 years ago
wurstnase
c85a486445
make the dual z-endstop optional (PR#2277)
...
it's disabled by default
10 years ago
Scott Lahteine
962b107341
Prevent current_command_args from bypassing nul (PR#2270)
10 years ago
Richard Wackerbarth
06ae832276
Deprecate Support for Arduino IDE < 1.0.5
...
Note that newer versions of the IDE can still
be made to support compilation for the older boards.
10 years ago
Scott Lahteine
ff6081be3a
Parse N[0-9]+[ ]* differently (PR #2263 )
...
More general solution to skip N[0-9]+[ ]* in the parser as in #2218
10 years ago
Scott Lahteine
aad121864e
Include "Z" in M851 report
10 years ago
Scott Lahteine
96a3fba8ac
Reverse the sign of zprobe_zoffset
...
- When editing on the LCD, minus now means below the nozzle
- Stores the opposite sign in EEPROM, so bumped to “V20”
10 years ago
fmalpartida
f92907183c
Updated SAV MkI pin header.
10 years ago
Richard Wackerbarth
58941e543e
ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED removed
...
#defining something just to define something else doesn’t
make sense
If you want SDCARDDETECTINVERTED, just define it yourself.
If the previous code was intended to define, undefined and then again define the term, that code is improper.
10 years ago
CONSULitAS
788eb6e647
planner.cpp: remove tab
...
planner.cpp: single evil and hidden tab removed ♻️ 😏
10 years ago
CONSULitAS
3a5963c0e7
Configuration_adv.h: Add FAN_MIN_PWM for slow fan stopping issue …
...
* all Configuration_adv.h: Add #define FAN_MIN_PWM for slow fan stopping
issue
* for K8200: uncommented with tested (and working) values
10 years ago
CONSULitAS
e55e65d1e4
planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue …
...
@CONSULitAS
planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue (V2.1 with
macro and linear scaling)
@thinkyhead thanks for idea on linear scaling
10 years ago
paclema
8d295547be
* Auto filament change on CHANGEFILAMENT feature. Now you can activate this option that extrude filament until you press the button.
10 years ago
atfield90
6d0e91328d
Renamed Board_megatronics_1 to Board_minitronics
10 years ago
atfield90
c4a2e5ac23
Renamed Pins_megatronics_1 to Pins_minitronics
10 years ago
atfield90
2076906aaa
Renamed Pins_megatronics_1 to Pins_minitronics
10 years ago
tonokip
10733a2bb0
added minirambo pin definitions. V2
10 years ago
Richard Wackerbarth
303d47228e
Define Probe Path in new format
10 years ago
Richard Wackerbarth
ad09d6a60f
3 Step Allen Key Probe
10 years ago
Richard Wackerbarth
8359cdf01d
Check compatibility for Teensy-based processor
...
The instruction say to set a #define in fastio.h
However, that value is not included before this test.
10 years ago
Ed Boston
08968c29bb
Adding ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED to Examples
10 years ago
Ed Boston
fed18bcc20
Removed SDSLOW for ELB_FULL_GRAPHIC_CONTROLLER
...
Hardware changes has removed the need for this option.
10 years ago
Ed Boston
b94a0e1501
Added ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED
...
The new define allows the sd card detect to be inverted or not from
Configuration.h
10 years ago
Ed Boston
bc205c76a3
SDCARDDETECTINVERTED problems
...
Fixed an error where SDCARDDETECTINVERTED was being defined/undefined
improperly
10 years ago
AnHardt
e400fce271
Merge pull request #2221 from MagoKimbra/Dryrun
...
Insert Debug DRYRUN Repetier Host compatible
10 years ago
AnHardt
163a9ff58e
Merge pull request #2230 from AnHardt/psm
...
Fix thermal protection state machine target temp. V2
10 years ago
AnHardt
c3fe6e61ae
Merge pull request #2229 from AnHardt/position-out-of-range
...
Fix out_of_range_error()
10 years ago
MagoKimbra
4db8d2def4
Moved MSG_DEBUG in language.h
10 years ago
AnHardt
b7e9ba7591
Back to 1.0.3 dev - for now
10 years ago
AnHardt
d1f4471000
Merge pull request #2146 from Wackerbarth/Versioning
...
Versioning
10 years ago