Bring STM32F4/F7 together
Scott Lahteine
6 years ago
parent
cf9ac4c847
commit
ad1c061e7b
@ -1,111 +0,0 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Description: Functions for a Flash emulated EEPROM
|
||||
* Not platform dependent.
|
||||
*/
|
||||
|
||||
#if defined(STM32GENERIC) && defined(STM32F4)
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
|
||||
#if ENABLED(EEPROM_SETTINGS) && NONE(I2C_EEPROM, SPI_EEPROM)
|
||||
|
||||
// ------------------------
|
||||
// Includes
|
||||
// ------------------------
|
||||
|
||||
#include "HAL.h"
|
||||
#include "EEPROM_Emul/eeprom_emul.h"
|
||||
|
||||
// ------------------------
|
||||
// Local defines
|
||||
// ------------------------
|
||||
|
||||
// FLASH_FLAG_PGSERR (Programming Sequence Error) was renamed to
|
||||
// FLASH_FLAG_ERSERR (Erasing Sequence Error) in STM32F4
|
||||
// #define FLASH_FLAG_PGSERR FLASH_FLAG_ERSERR
|
||||
|
||||
// ------------------------
|
||||
// Private Variables
|
||||
// ------------------------
|
||||
|
||||
static bool eeprom_initialized = false;
|
||||
|
||||
// ------------------------
|
||||
// Public functions
|
||||
// ------------------------
|
||||
|
||||
void eeprom_init() {
|
||||
if (!eeprom_initialized) {
|
||||
HAL_FLASH_Unlock();
|
||||
|
||||
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR);
|
||||
|
||||
/* EEPROM Init */
|
||||
if (EE_Initialize() != EE_OK)
|
||||
for (;;) HAL_Delay(1); // Spin forever until watchdog reset
|
||||
|
||||
HAL_FLASH_Lock();
|
||||
eeprom_initialized = true;
|
||||
}
|
||||
}
|
||||
|
||||
void eeprom_write_byte(uint8_t *pos, unsigned char value) {
|
||||
uint16_t eeprom_address = unsigned(pos);
|
||||
|
||||
eeprom_init();
|
||||
|
||||
HAL_FLASH_Unlock();
|
||||
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR);
|
||||
|
||||
if (EE_WriteVariable(eeprom_address, uint16_t(value)) != EE_OK)
|
||||
for (;;) HAL_Delay(1); // Spin forever until watchdog reset
|
||||
|
||||
HAL_FLASH_Lock();
|
||||
}
|
||||
|
||||
uint8_t eeprom_read_byte(uint8_t *pos) {
|
||||
eeprom_init();
|
||||
|
||||
uint16_t data = 0xFF;
|
||||
uint16_t eeprom_address = unsigned(pos);
|
||||
(void)EE_ReadVariable(eeprom_address, &data); // Data unchanged on error
|
||||
|
||||
return uint8_t(data);
|
||||
}
|
||||
|
||||
void eeprom_read_block(void *__dst, const void *__src, size_t __n) {
|
||||
eeprom_init();
|
||||
|
||||
uint16_t data = 0xFF;
|
||||
uint16_t eeprom_address = (unsigned)__src;
|
||||
for (uint8_t c = 0; c < __n; c++) {
|
||||
EE_ReadVariable(eeprom_address+c, &data);
|
||||
*((uint8_t*)__dst + c) = data;
|
||||
}
|
||||
}
|
||||
|
||||
void eeprom_update_block(const void *__src, void *__dst, size_t __n) {
|
||||
|
||||
}
|
||||
|
||||
#endif // EEPROM_SETTINGS && (!I2C_EEPROM && !SPI_EEPROM)
|
||||
#endif // STM32GENERIC && STM32F4
|
||||
@ -1,53 +0,0 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
* Copyright (c) 2017 Victor Perez
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#if defined(STM32GENERIC) && defined(STM32F4)
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
|
||||
#if HAS_SERVOS
|
||||
|
||||
#include "HAL_Servo_STM32F4.h"
|
||||
|
||||
int8_t libServo::attach(const int pin) {
|
||||
return Servo::attach(pin);
|
||||
}
|
||||
|
||||
int8_t libServo::attach(const int pin, const int min, const int max) {
|
||||
return Servo::attach(pin, min, max);
|
||||
}
|
||||
|
||||
void libServo::move(const int value) {
|
||||
constexpr uint16_t servo_delay[] = SERVO_DELAY;
|
||||
static_assert(COUNT(servo_delay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long.");
|
||||
if (this->attach(0) >= 0) {
|
||||
this->write(value);
|
||||
safe_delay(servo_delay[this->servoIndex]);
|
||||
#if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE)
|
||||
this->detach();
|
||||
#endif
|
||||
}
|
||||
}
|
||||
#endif // HAS_SERVOS
|
||||
|
||||
#endif // STM32GENERIC && STM32F4
|
||||
@ -1,153 +0,0 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
* Copyright (c) 2017 Victor Perez
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Fast I/O interfaces for STM32F4
|
||||
* These use GPIO functions instead of Direct Port Manipulation, as on AVR.
|
||||
*/
|
||||
|
||||
#undef _BV
|
||||
#define _BV(b) (1 << (b))
|
||||
|
||||
#define READ(IO) digitalRead(IO)
|
||||
#define WRITE(IO,V) digitalWrite(IO,V)
|
||||
|
||||
#define _GET_MODE(IO)
|
||||
#define _SET_MODE(IO,M) pinMode(IO, M)
|
||||
#define _SET_OUTPUT(IO) pinMode(IO, OUTPUT) /*!< Output Push Pull Mode & GPIO_NOPULL */
|
||||
|
||||
#define OUT_WRITE(IO,V) do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
|
||||
|
||||
#define SET_INPUT(IO) _SET_MODE(IO, INPUT) /*!< Input Floating Mode */
|
||||
#define SET_INPUT_PULLUP(IO) _SET_MODE(IO, INPUT_PULLUP) /*!< Input with Pull-up activation */
|
||||
#define SET_INPUT_PULLDOWN(IO) _SET_MODE(IO, INPUT_PULLDOWN) /*!< Input with Pull-down activation */
|
||||
#define SET_OUTPUT(IO) OUT_WRITE(IO, LOW)
|
||||
#define SET_PWM(IO) pinMode(IO, PWM)
|
||||
|
||||
#define TOGGLE(IO) OUT_WRITE(IO, !READ(IO))
|
||||
|
||||
#define IS_INPUT(IO)
|
||||
#define IS_OUTPUT(IO)
|
||||
|
||||
#define PWM_PIN(P) true
|
||||
|
||||
// digitalRead/Write wrappers
|
||||
#define extDigitalRead(IO) digitalRead(IO)
|
||||
#define extDigitalWrite(IO,V) digitalWrite(IO,V)
|
||||
|
||||
//
|
||||
// Pins Definitions
|
||||
//
|
||||
#define PORTA 0
|
||||
#define PORTB 1
|
||||
#define PORTC 2
|
||||
#define PORTD 3
|
||||
#define PORTE 4
|
||||
|
||||
#define _STM32_PIN(P,PN) ((PORT##P * 16) + PN)
|
||||
|
||||
#define PA0 _STM32_PIN(A, 0)
|
||||
#define PA1 _STM32_PIN(A, 1)
|
||||
#define PA2 _STM32_PIN(A, 2)
|
||||
#define PA3 _STM32_PIN(A, 3)
|
||||
#define PA4 _STM32_PIN(A, 4)
|
||||
#define PA5 _STM32_PIN(A, 5)
|
||||
#define PA6 _STM32_PIN(A, 6)
|
||||
#define PA7 _STM32_PIN(A, 7)
|
||||
#define PA8 _STM32_PIN(A, 8)
|
||||
#define PA9 _STM32_PIN(A, 9)
|
||||
#define PA10 _STM32_PIN(A, 10)
|
||||
#define PA11 _STM32_PIN(A, 11)
|
||||
#define PA12 _STM32_PIN(A, 12)
|
||||
#define PA13 _STM32_PIN(A, 13)
|
||||
#define PA14 _STM32_PIN(A, 14)
|
||||
#define PA15 _STM32_PIN(A, 15)
|
||||
|
||||
#define PB0 _STM32_PIN(B, 0)
|
||||
#define PB1 _STM32_PIN(B, 1)
|
||||
#define PB2 _STM32_PIN(B, 2)
|
||||
#define PB3 _STM32_PIN(B, 3)
|
||||
#define PB4 _STM32_PIN(B, 4)
|
||||
#define PB5 _STM32_PIN(B, 5)
|
||||
#define PB6 _STM32_PIN(B, 6)
|
||||
#define PB7 _STM32_PIN(B, 7)
|
||||
#define PB8 _STM32_PIN(B, 8)
|
||||
#define PB9 _STM32_PIN(B, 9)
|
||||
#define PB10 _STM32_PIN(B, 10)
|
||||
#define PB11 _STM32_PIN(B, 11)
|
||||
#define PB12 _STM32_PIN(B, 12)
|
||||
#define PB13 _STM32_PIN(B, 13)
|
||||
#define PB14 _STM32_PIN(B, 14)
|
||||
#define PB15 _STM32_PIN(B, 15)
|
||||
|
||||
#define PC0 _STM32_PIN(C, 0)
|
||||
#define PC1 _STM32_PIN(C, 1)
|
||||
#define PC2 _STM32_PIN(C, 2)
|
||||
#define PC3 _STM32_PIN(C, 3)
|
||||
#define PC4 _STM32_PIN(C, 4)
|
||||
#define PC5 _STM32_PIN(C, 5)
|
||||
#define PC6 _STM32_PIN(C, 6)
|
||||
#define PC7 _STM32_PIN(C, 7)
|
||||
#define PC8 _STM32_PIN(C, 8)
|
||||
#define PC9 _STM32_PIN(C, 9)
|
||||
#define PC10 _STM32_PIN(C, 10)
|
||||
#define PC11 _STM32_PIN(C, 11)
|
||||
#define PC12 _STM32_PIN(C, 12)
|
||||
#define PC13 _STM32_PIN(C, 13)
|
||||
#define PC14 _STM32_PIN(C, 14)
|
||||
#define PC15 _STM32_PIN(C, 15)
|
||||
|
||||
#define PD0 _STM32_PIN(D, 0)
|
||||
#define PD1 _STM32_PIN(D, 1)
|
||||
#define PD2 _STM32_PIN(D, 2)
|
||||
#define PD3 _STM32_PIN(D, 3)
|
||||
#define PD4 _STM32_PIN(D, 4)
|
||||
#define PD5 _STM32_PIN(D, 5)
|
||||
#define PD6 _STM32_PIN(D, 6)
|
||||
#define PD7 _STM32_PIN(D, 7)
|
||||
#define PD8 _STM32_PIN(D, 8)
|
||||
#define PD9 _STM32_PIN(D, 9)
|
||||
#define PD10 _STM32_PIN(D, 10)
|
||||
#define PD11 _STM32_PIN(D, 11)
|
||||
#define PD12 _STM32_PIN(D, 12)
|
||||
#define PD13 _STM32_PIN(D, 13)
|
||||
#define PD14 _STM32_PIN(D, 14)
|
||||
#define PD15 _STM32_PIN(D, 15)
|
||||
|
||||
#define PE0 _STM32_PIN(E, 0)
|
||||
#define PE1 _STM32_PIN(E, 1)
|
||||
#define PE2 _STM32_PIN(E, 2)
|
||||
#define PE3 _STM32_PIN(E, 3)
|
||||
#define PE4 _STM32_PIN(E, 4)
|
||||
#define PE5 _STM32_PIN(E, 5)
|
||||
#define PE6 _STM32_PIN(E, 6)
|
||||
#define PE7 _STM32_PIN(E, 7)
|
||||
#define PE8 _STM32_PIN(E, 8)
|
||||
#define PE9 _STM32_PIN(E, 9)
|
||||
#define PE10 _STM32_PIN(E, 10)
|
||||
#define PE11 _STM32_PIN(E, 11)
|
||||
#define PE12 _STM32_PIN(E, 12)
|
||||
#define PE13 _STM32_PIN(E, 13)
|
||||
#define PE14 _STM32_PIN(E, 14)
|
||||
#define PE15 _STM32_PIN(E, 15)
|
||||
@ -1,69 +0,0 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
*
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
||||
* Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#if defined(STM32GENERIC) && defined(STM32F4)
|
||||
|
||||
#include "../shared/persistent_store_api.h"
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
|
||||
bool PersistentStore::access_start() { return true; }
|
||||
bool PersistentStore::access_finish() { return true; }
|
||||
|
||||
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
|
||||
while (size--) {
|
||||
uint8_t * const p = (uint8_t * const)pos;
|
||||
uint8_t v = *value;
|
||||
// EEPROM has only ~100,000 write cycles,
|
||||
// so only write bytes that have changed!
|
||||
if (v != eeprom_read_byte(p)) {
|
||||
eeprom_write_byte(p, v);
|
||||
if (eeprom_read_byte(p) != v) {
|
||||
SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
|
||||
return true;
|
||||
}
|
||||
}
|
||||
crc16(crc, &v, 1);
|
||||
pos++;
|
||||
value++;
|
||||
};
|
||||
return false;
|
||||
}
|
||||
|
||||
bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing) {
|
||||
do {
|
||||
uint8_t c = eeprom_read_byte((uint8_t*)pos);
|
||||
if (writing) *value = c;
|
||||
crc16(crc, &c, 1);
|
||||
pos++;
|
||||
value++;
|
||||
} while (--size);
|
||||
return false;
|
||||
}
|
||||
|
||||
size_t PersistentStore::capacity() { return E2END + 1; }
|
||||
|
||||
#endif // EEPROM_SETTINGS
|
||||
#endif // STM32GENERIC && STM32F4
|
||||
@ -1,27 +0,0 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifdef NUM_DIGITAL_PINS // Only in ST's Arduino core (STM32duino, STM32Core)
|
||||
#include "../HAL_STM32/pinsDebug_STM32duino.h"
|
||||
#elif defined(BOARD_NR_GPIO_PINS) // Only in STM32GENERIC (Maple)
|
||||
#include "../HAL_STM32/pinsDebug_STM32GENERIC.h"
|
||||
#else
|
||||
#error "M43 not supported for this board"
|
||||
#endif
|
||||
@ -1,525 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file EEPROM/EEPROM_Emulation/src/eeprom.c
|
||||
* @author MCD Application Team
|
||||
* @version V1.2.6
|
||||
* @date 04-November-2016
|
||||
* @brief This file provides all the EEPROM emulation firmware functions.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright © 2016 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/** @addtogroup EEPROM_Emulation
|
||||
* @{
|
||||
*/
|
||||
#ifdef STM32F7
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "eeprom_emul.h"
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* Global variable used to store variable value in read sequence */
|
||||
uint16_t DataVar = 0;
|
||||
|
||||
/* Virtual address defined by the user: 0xFFFF value is prohibited */
|
||||
uint16_t VirtAddVarTab[NB_OF_VAR];
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
static HAL_StatusTypeDef EE_Format(void);
|
||||
static uint16_t EE_FindValidPage(uint8_t Operation);
|
||||
static uint16_t EE_VerifyPageFullWriteVariable(uint16_t VirtAddress, uint16_t Data);
|
||||
static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data);
|
||||
static uint16_t EE_VerifyPageFullyErased(uint32_t Address);
|
||||
|
||||
/**
|
||||
* @brief Restore the pages to a known good state in case of page's status
|
||||
* corruption after a power loss.
|
||||
* @param None.
|
||||
* @retval - Flash error code: on write Flash error
|
||||
* - FLASH_COMPLETE: on success
|
||||
*/
|
||||
uint16_t EE_Initialize(void) {
|
||||
/* Get Page0 and Page1 status */
|
||||
uint16_t PageStatus0 = (*(__IO uint16_t*)PAGE0_BASE_ADDRESS),
|
||||
PageStatus1 = (*(__IO uint16_t*)PAGE1_BASE_ADDRESS);
|
||||
|
||||
FLASH_EraseInitTypeDef pEraseInit;
|
||||
pEraseInit.TypeErase = TYPEERASE_SECTORS;
|
||||
pEraseInit.Sector = PAGE0_ID;
|
||||
pEraseInit.NbSectors = 1;
|
||||
pEraseInit.VoltageRange = VOLTAGE_RANGE;
|
||||
|
||||
/* Check for invalid header states and repair if necessary */
|
||||
uint32_t SectorError;
|
||||
switch (PageStatus0) {
|
||||
case ERASED:
|
||||
if (PageStatus1 == VALID_PAGE) { /* Page0 erased, Page1 valid */
|
||||
/* Erase Page0 */
|
||||
if (!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS)) {
|
||||
/* As the last operation, simply return the result */
|
||||
return HAL_FLASHEx_Erase(&pEraseInit, &SectorError);
|
||||
}
|
||||
}
|
||||
else if (PageStatus1 == RECEIVE_DATA) { /* Page0 erased, Page1 receive */
|
||||
/* Erase Page0 */
|
||||
if (!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS)) {
|
||||
HAL_StatusTypeDef fStat = HAL_FLASHEx_Erase(&pEraseInit, &SectorError);
|
||||
/* If erase operation was failed, a Flash error code is returned */
|
||||
if (fStat != HAL_OK) return fStat;
|
||||
}
|
||||
/* Mark Page1 as valid */
|
||||
/* As the last operation, simply return the result */
|
||||
return HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, PAGE1_BASE_ADDRESS, VALID_PAGE);
|
||||
}
|
||||
else { /* First EEPROM access (Page0&1 are erased) or invalid state -> format EEPROM */
|
||||
/* Erase both Page0 and Page1 and set Page0 as valid page */
|
||||
/* As the last operation, simply return the result */
|
||||
return EE_Format();
|
||||
}
|
||||
break;
|
||||
|
||||
case RECEIVE_DATA:
|
||||
if (PageStatus1 == VALID_PAGE) { /* Page0 receive, Page1 valid */
|
||||
/* Transfer data from Page1 to Page0 */
|
||||
int16_t x = -1;
|
||||
for (uint16_t VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++) {
|
||||
if (( *(__IO uint16_t*)(PAGE0_BASE_ADDRESS + 6)) == VirtAddVarTab[VarIdx])
|
||||
x = VarIdx;
|
||||
if (VarIdx != x) {
|
||||
/* Read the last variables' updates */
|
||||
uint16_t ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar);
|
||||
/* In case variable corresponding to the virtual address was found */
|
||||
if (ReadStatus != 0x1) {
|
||||
/* Transfer the variable to the Page0 */
|
||||
uint16_t EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (EepromStatus != HAL_OK) return EepromStatus;
|
||||
}
|
||||
}
|
||||
}
|
||||
/* Mark Page0 as valid */
|
||||
HAL_StatusTypeDef FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, PAGE0_BASE_ADDRESS, VALID_PAGE);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK) return FlashStatus;
|
||||
pEraseInit.Sector = PAGE1_ID;
|
||||
pEraseInit.NbSectors = 1;
|
||||
pEraseInit.VoltageRange = VOLTAGE_RANGE;
|
||||
/* Erase Page1 */
|
||||
if (!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS)) {
|
||||
/* As the last operation, simply return the result */
|
||||
return HAL_FLASHEx_Erase(&pEraseInit, &SectorError);
|
||||
}
|
||||
}
|
||||
else if (PageStatus1 == ERASED) { /* Page0 receive, Page1 erased */
|
||||
pEraseInit.Sector = PAGE1_ID;
|
||||
pEraseInit.NbSectors = 1;
|
||||
pEraseInit.VoltageRange = VOLTAGE_RANGE;
|
||||
/* Erase Page1 */
|
||||
if (!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS)) {
|
||||
HAL_StatusTypeDef fStat = HAL_FLASHEx_Erase(&pEraseInit, &SectorError);
|
||||
/* If erase operation was failed, a Flash error code is returned */
|
||||
if (fStat != HAL_OK) return fStat;
|
||||
}
|
||||
/* Mark Page0 as valid */
|
||||
/* As the last operation, simply return the result */
|
||||
return HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, PAGE0_BASE_ADDRESS, VALID_PAGE);
|
||||
}
|
||||
else { /* Invalid state -> format eeprom */
|
||||
/* Erase both Page0 and Page1 and set Page0 as valid page */
|
||||
/* As the last operation, simply return the result */
|
||||
return EE_Format();
|
||||
}
|
||||
break;
|
||||
|
||||
case VALID_PAGE:
|
||||
if (PageStatus1 == VALID_PAGE) { /* Invalid state -> format eeprom */
|
||||
/* Erase both Page0 and Page1 and set Page0 as valid page */
|
||||
FlashStatus = EE_Format();
|
||||
/* If erase/program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK) return FlashStatus;
|
||||
}
|
||||
else if (PageStatus1 == ERASED) { /* Page0 valid, Page1 erased */
|
||||
pEraseInit.Sector = PAGE1_ID;
|
||||
pEraseInit.NbSectors = 1;
|
||||
pEraseInit.VoltageRange = VOLTAGE_RANGE;
|
||||
/* Erase Page1 */
|
||||
if (!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS)) {
|
||||
FlashStatus = HAL_FLASHEx_Erase(&pEraseInit, &SectorError);
|
||||
/* If erase operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK) return FlashStatus;
|
||||
}
|
||||
}
|
||||
else { /* Page0 valid, Page1 receive */
|
||||
/* Transfer data from Page0 to Page1 */
|
||||
int16_t x = -1;
|
||||
for (uint16_t VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++) {
|
||||
if ((*(__IO uint16_t*)(PAGE1_BASE_ADDRESS + 6)) == VirtAddVarTab[VarIdx])
|
||||
x = VarIdx;
|
||||
|
||||
if (VarIdx != x) {
|
||||
/* Read the last variables' updates */
|
||||
uint16_t ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar);
|
||||
/* In case variable corresponding to the virtual address was found */
|
||||
if (ReadStatus != 0x1) {
|
||||
/* Transfer the variable to the Page1 */
|
||||
uint16_t EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (EepromStatus != HAL_OK) return EepromStatus;
|
||||
}
|
||||
}
|
||||
}
|
||||
/* Mark Page1 as valid */
|
||||
FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, PAGE1_BASE_ADDRESS, VALID_PAGE);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK) return FlashStatus;
|
||||
pEraseInit.Sector = PAGE0_ID;
|
||||
pEraseInit.NbSectors = 1;
|
||||
pEraseInit.VoltageRange = VOLTAGE_RANGE;
|
||||
/* Erase Page0 */
|
||||
if (!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS)) {
|
||||
/* As the last operation, simply return the result */
|
||||
return HAL_FLASHEx_Erase(&pEraseInit, &SectorError);
|
||||
}
|
||||
}
|
||||
break;
|
||||
|
||||
default: /* Any other state -> format eeprom */
|
||||
/* Erase both Page0 and Page1 and set Page0 as valid page */
|
||||
/* As the last operation, simply return the result */
|
||||
return EE_Format();
|
||||
}
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Verify if specified page is fully erased.
|
||||
* @param Address: page address
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PAGE0_BASE_ADDRESS: Page0 base address
|
||||
* @arg PAGE1_BASE_ADDRESS: Page1 base address
|
||||
* @retval page fully erased status:
|
||||
* - 0: if Page not erased
|
||||
* - 1: if Page erased
|
||||
*/
|
||||
uint16_t EE_VerifyPageFullyErased(uint32_t Address) {
|
||||
uint32_t ReadStatus = 1;
|
||||
/* Check each active page address starting from end */
|
||||
while (Address <= PAGE0_END_ADDRESS) {
|
||||
/* Get the current location content to be compared with virtual address */
|
||||
uint16_t AddressValue = (*(__IO uint16_t*)Address);
|
||||
/* Compare the read address with the virtual address */
|
||||
if (AddressValue != ERASED) {
|
||||
/* In case variable value is read, reset ReadStatus flag */
|
||||
ReadStatus = 0;
|
||||
break;
|
||||
}
|
||||
/* Next address location */
|
||||
Address += 4;
|
||||
}
|
||||
/* Return ReadStatus value: (0: Page not erased, 1: Sector erased) */
|
||||
return ReadStatus;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Returns the last stored variable data, if found, which correspond to
|
||||
* the passed virtual address
|
||||
* @param VirtAddress: Variable virtual address
|
||||
* @param Data: Global variable contains the read variable value
|
||||
* @retval Success or error status:
|
||||
* - 0: if variable was found
|
||||
* - 1: if the variable was not found
|
||||
* - NO_VALID_PAGE: if no valid page was found.
|
||||
*/
|
||||
uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data) {
|
||||
uint16_t ReadStatus = 1;
|
||||
|
||||
/* Get active Page for read operation */
|
||||
uint16_t ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE);
|
||||
|
||||
/* Check if there is no valid page */
|
||||
if (ValidPage == NO_VALID_PAGE) return NO_VALID_PAGE;
|
||||
|
||||
/* Get the valid Page start and end Addresses */
|
||||
uint32_t PageStartAddress = uint32_t(EEPROM_START_ADDRESS) + uint32_t(ValidPage * (PAGE_SIZE)),
|
||||
Address = PageStartAddress + PAGE_SIZE - 2;
|
||||
|
||||
/* Check each active page address starting from end */
|
||||
while (Address > PageStartAddress + 2) {
|
||||
/* Get the current location content to be compared with virtual address */
|
||||
uint16_t AddressValue = (*(__IO uint16_t*)Address);
|
||||
|
||||
/* Compare the read address with the virtual address */
|
||||
if (AddressValue == VirtAddress) {
|
||||
/* Get content of Address-2 which is variable value */
|
||||
*Data = (*(__IO uint16_t*)(Address - 2));
|
||||
/* In case variable value is read, reset ReadStatus flag */
|
||||
ReadStatus = 0;
|
||||
break;
|
||||
}
|
||||
else /* Next address location */
|
||||
Address -= 4;
|
||||
}
|
||||
/* Return ReadStatus value: (0: variable exist, 1: variable doesn't exist) */
|
||||
return ReadStatus;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Writes/upadtes variable data in EEPROM.
|
||||
* @param VirtAddress: Variable virtual address
|
||||
* @param Data: 16 bit data to be written
|
||||
* @retval Success or error status:
|
||||
* - FLASH_COMPLETE: on success
|
||||
* - PAGE_FULL: if valid page is full
|
||||
* - NO_VALID_PAGE: if no valid page was found
|
||||
* - Flash error code: on write Flash error
|
||||
*/
|
||||
uint16_t EE_WriteVariable(uint16_t VirtAddress, uint16_t Data) {
|
||||
/* Write the variable virtual address and value in the EEPROM */
|
||||
uint16_t Status = EE_VerifyPageFullWriteVariable(VirtAddress, Data);
|
||||
|
||||
/* In case the EEPROM active page is full */
|
||||
if (Status == PAGE_FULL) /* Perform Page transfer */
|
||||
Status = EE_PageTransfer(VirtAddress, Data);
|
||||
|
||||
/* Return last operation status */
|
||||
return Status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Erases PAGE and PAGE1 and writes VALID_PAGE header to PAGE
|
||||
* @param None
|
||||
* @retval Status of the last operation (Flash write or erase) done during
|
||||
* EEPROM formating
|
||||
*/
|
||||
static HAL_StatusTypeDef EE_Format(void) {
|
||||
FLASH_EraseInitTypeDef pEraseInit;
|
||||
pEraseInit.TypeErase = FLASH_TYPEERASE_SECTORS;
|
||||
pEraseInit.Sector = PAGE0_ID;
|
||||
pEraseInit.NbSectors = 1;
|
||||
pEraseInit.VoltageRange = VOLTAGE_RANGE;
|
||||
|
||||
HAL_StatusTypeDef FlashStatus; // = HAL_OK
|
||||
|
||||
/* Erase Page0 */
|
||||
if (!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS)) {
|
||||
uint32_t SectorError;
|
||||
FlashStatus = HAL_FLASHEx_Erase(&pEraseInit, &SectorError);
|
||||
/* If erase operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK) return FlashStatus;
|
||||
}
|
||||
/* Set Page0 as valid page: Write VALID_PAGE at Page0 base address */
|
||||
FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, PAGE0_BASE_ADDRESS, VALID_PAGE);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK) return FlashStatus;
|
||||
|
||||
pEraseInit.Sector = PAGE1_ID;
|
||||
/* Erase Page1 */
|
||||
if (!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS)) {
|
||||
/* As the last operation, just return the result code */
|
||||
uint32_t SectorError;
|
||||
return HAL_FLASHEx_Erase(&pEraseInit, &SectorError);
|
||||
}
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Find valid Page for write or read operation
|
||||
* @param Operation: operation to achieve on the valid page.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg READ_FROM_VALID_PAGE: read operation from valid page
|
||||
* @arg WRITE_IN_VALID_PAGE: write operation from valid page
|
||||
* @retval Valid page number (PAGE or PAGE1) or NO_VALID_PAGE in case
|
||||
* of no valid page was found
|
||||
*/
|
||||
static uint16_t EE_FindValidPage(uint8_t Operation) {
|
||||
/* Get Page0 and Page1 actual status */
|
||||
uint16_t PageStatus0 = (*(__IO uint16_t*)PAGE0_BASE_ADDRESS),
|
||||
PageStatus1 = (*(__IO uint16_t*)PAGE1_BASE_ADDRESS);
|
||||
|
||||
/* Write or read operation */
|
||||
switch (Operation) {
|
||||
case WRITE_IN_VALID_PAGE: /* ---- Write operation ---- */
|
||||
if (PageStatus1 == VALID_PAGE) {
|
||||
/* Page0 receiving data */
|
||||
return (PageStatus0 == RECEIVE_DATA) ? PAGE0 : PAGE1;
|
||||
}
|
||||
else if (PageStatus0 == VALID_PAGE) {
|
||||
/* Page1 receiving data */
|
||||
return (PageStatus1 == RECEIVE_DATA) ? PAGE1 : PAGE0;
|
||||
}
|
||||
else
|
||||
return NO_VALID_PAGE; /* No valid Page */
|
||||
|
||||
case READ_FROM_VALID_PAGE: /* ---- Read operation ---- */
|
||||
if (PageStatus0 == VALID_PAGE)
|
||||
return PAGE0; /* Page0 valid */
|
||||
else if (PageStatus1 == VALID_PAGE)
|
||||
return PAGE1; /* Page1 valid */
|
||||
else
|
||||
return NO_VALID_PAGE; /* No valid Page */
|
||||
|
||||
default:
|
||||
return PAGE0; /* Page0 valid */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Verify if active page is full and Writes variable in EEPROM.
|
||||
* @param VirtAddress: 16 bit virtual address of the variable
|
||||
* @param Data: 16 bit data to be written as variable value
|
||||
* @retval Success or error status:
|
||||
* - FLASH_COMPLETE: on success
|
||||
* - PAGE_FULL: if valid page is full
|
||||
* - NO_VALID_PAGE: if no valid page was found
|
||||
* - Flash error code: on write Flash error
|
||||
*/
|
||||
static uint16_t EE_VerifyPageFullWriteVariable(uint16_t VirtAddress, uint16_t Data) {
|
||||
/* Get valid Page for write operation */
|
||||
uint16_t ValidPage = EE_FindValidPage(WRITE_IN_VALID_PAGE);
|
||||
|
||||
/* Check if there is no valid page */
|
||||
if (ValidPage == NO_VALID_PAGE) return NO_VALID_PAGE;
|
||||
|
||||
/* Get the valid Page start and end Addresses */
|
||||
uint32_t Address = uint32_t(EEPROM_START_ADDRESS) + uint32_t(ValidPage * (PAGE_SIZE)),
|
||||
PageEndAddress = Address + PAGE_SIZE - 1;
|
||||
|
||||
/* Check each active page address starting from begining */
|
||||
while (Address < PageEndAddress) {
|
||||
/* Verify if Address and Address+2 contents are 0xFFFFFFFF */
|
||||
if ((*(__IO uint32_t*)Address) == 0xFFFFFFFF) {
|
||||
/* Set variable data */
|
||||
HAL_StatusTypeDef FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, Address, Data);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK) return FlashStatus;
|
||||
/* Set variable virtual address, return status */
|
||||
return HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, Address + 2, VirtAddress);
|
||||
}
|
||||
else /* Next address location */
|
||||
Address += 4;
|
||||
}
|
||||
|
||||
/* Return PAGE_FULL in case the valid page is full */
|
||||
return PAGE_FULL;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Transfers last updated variables data from the full Page to
|
||||
* an empty one.
|
||||
* @param VirtAddress: 16 bit virtual address of the variable
|
||||
* @param Data: 16 bit data to be written as variable value
|
||||
* @retval Success or error status:
|
||||
* - FLASH_COMPLETE: on success
|
||||
* - PAGE_FULL: if valid page is full
|
||||
* - NO_VALID_PAGE: if no valid page was found
|
||||
* - Flash error code: on write Flash error
|
||||
*/
|
||||
static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data) {
|
||||
/* Get active Page for read operation */
|
||||
uint16_t ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE);
|
||||
uint32_t NewPageAddress = EEPROM_START_ADDRESS;
|
||||
uint16_t OldPageId = 0;
|
||||
|
||||
if (ValidPage == PAGE1) { /* Page1 valid */
|
||||
/* New page address where variable will be moved to */
|
||||
NewPageAddress = PAGE0_BASE_ADDRESS;
|
||||
/* Old page ID where variable will be taken from */
|
||||
OldPageId = PAGE1_ID;
|
||||
}
|
||||
else if (ValidPage == PAGE0) { /* Page0 valid */
|
||||
/* New page address where variable will be moved to */
|
||||
NewPageAddress = PAGE1_BASE_ADDRESS;
|
||||
/* Old page ID where variable will be taken from */
|
||||
OldPageId = PAGE0_ID;
|
||||
}
|
||||
else
|
||||
return NO_VALID_PAGE; /* No valid Page */
|
||||
|
||||
/* Set the new Page status to RECEIVE_DATA status */
|
||||
HAL_StatusTypeDef FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, NewPageAddress, RECEIVE_DATA);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK) return FlashStatus;
|
||||
|
||||
/* Write the variable passed as parameter in the new active page */
|
||||
uint16_t EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddress, Data);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (EepromStatus != HAL_OK) return EepromStatus;
|
||||
|
||||
/* Transfer process: transfer variables from old to the new active page */
|
||||
for (uint16_t VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++) {
|
||||
if (VirtAddVarTab[VarIdx] != VirtAddress) { /* Check each variable except the one passed as parameter */
|
||||
/* Read the other last variable updates */
|
||||
uint16_t ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar);
|
||||
/* In case variable corresponding to the virtual address was found */
|
||||
if (ReadStatus != 0x1) {
|
||||
/* Transfer the variable to the new active page */
|
||||
EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (EepromStatus != HAL_OK) return EepromStatus;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
FLASH_EraseInitTypeDef pEraseInit;
|
||||
pEraseInit.TypeErase = TYPEERASE_SECTORS;
|
||||
pEraseInit.Sector = OldPageId;
|
||||
pEraseInit.NbSectors = 1;
|
||||
pEraseInit.VoltageRange = VOLTAGE_RANGE;
|
||||
|
||||
/* Erase the old Page: Set old Page status to ERASED status */
|
||||
uint32_t SectorError;
|
||||
FlashStatus = HAL_FLASHEx_Erase(&pEraseInit, &SectorError);
|
||||
/* If erase operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK) return FlashStatus;
|
||||
|
||||
/* Set new Page status to VALID_PAGE status */
|
||||
/* As the last operation, just return the result code */
|
||||
return HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, NewPageAddress, VALID_PAGE);
|
||||
}
|
||||
|
||||
#endif // STM32F7
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
|
||||
@ -1,109 +0,0 @@
|
||||
/******************************************************************************
|
||||
* @file eeprom_emul.h
|
||||
* @author MCD Application Team
|
||||
* @version V1.2.6
|
||||
* @date 04-November-2016
|
||||
* @brief This file contains all the functions prototypes for the EEPROM
|
||||
* emulation firmware library.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright © 2016 STMicroelectronics International N.V.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
*****************************************************************************/
|
||||
#pragma once
|
||||
|
||||
// ------------------------
|
||||
// Includes
|
||||
// ------------------------
|
||||
#include "../../../inc/MarlinConfig.h"
|
||||
#include "../HAL.h"
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* EEPROM emulation firmware error codes */
|
||||
#define EE_OK uint32_t(HAL_OK)
|
||||
#define EE_ERROR uint32_t(HAL_ERROR)
|
||||
#define EE_BUSY uint32_t(HAL_BUSY)
|
||||
#define EE_TIMEOUT uint32_t(HAL_TIMEOUT)
|
||||
|
||||
/* Define the size of the sectors to be used */
|
||||
#define PAGE_SIZE uint32_t(0x4000) /* Page size = 16KByte */
|
||||
|
||||
/* Device voltage range supposed to be [2.7V to 3.6V], the operation will
|
||||
be done by word */
|
||||
#define VOLTAGE_RANGE uint8_t(VOLTAGE_RANGE_3)
|
||||
|
||||
/* EEPROM start address in Flash */
|
||||
#define EEPROM_START_ADDRESS uint32_t(0x08100000) /* EEPROM emulation start address:
|
||||
from sector2 : after 16KByte of used
|
||||
Flash memory */
|
||||
|
||||
/* Pages 0 and 1 base and end addresses */
|
||||
#define PAGE0_BASE_ADDRESS uint32_t(EEPROM_START_ADDRESS + 0x0000)
|
||||
#define PAGE0_END_ADDRESS uint32_t(EEPROM_START_ADDRESS + PAGE_SIZE - 1)
|
||||
#define PAGE0_ID FLASH_SECTOR_1
|
||||
|
||||
#define PAGE1_BASE_ADDRESS uint32_t(EEPROM_START_ADDRESS + 0x4000)
|
||||
#define PAGE1_END_ADDRESS uint32_t(EEPROM_START_ADDRESS + 2 * (PAGE_SIZE) - 1)
|
||||
#define PAGE1_ID FLASH_SECTOR_2
|
||||
|
||||
/* Used Flash pages for EEPROM emulation */
|
||||
#define PAGE0 uint16_t(0x0000)
|
||||
#define PAGE1 uint16_t(0x0001) /* Page nb between PAGE0_BASE_ADDRESS & PAGE1_BASE_ADDRESS*/
|
||||
|
||||
/* No valid page define */
|
||||
#define NO_VALID_PAGE uint16_t(0x00AB)
|
||||
|
||||
/* Page status definitions */
|
||||
#define ERASED uint16_t(0xFFFF) /* Page is empty */
|
||||
#define RECEIVE_DATA uint16_t(0xEEEE) /* Page is marked to receive data */
|
||||
#define VALID_PAGE uint16_t(0x0000) /* Page containing valid data */
|
||||
|
||||
/* Valid pages in read and write defines */
|
||||
#define READ_FROM_VALID_PAGE uint8_t(0x00)
|
||||
#define WRITE_IN_VALID_PAGE uint8_t(0x01)
|
||||
|
||||
/* Page full define */
|
||||
#define PAGE_FULL uint8_t(0x80)
|
||||
|
||||
/* Variables' number */
|
||||
#define NB_OF_VAR uint16_t(4096)
|
||||
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
uint16_t EE_Initialize(void);
|
||||
uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data);
|
||||
uint16_t EE_WriteVariable(uint16_t VirtAddress, uint16_t Data);
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@ -1,107 +0,0 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
*
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
||||
* Copyright (c) 2017 Victor Perez
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifdef STM32F7
|
||||
|
||||
#include "HAL.h"
|
||||
|
||||
//#include <Wire.h>
|
||||
|
||||
// ------------------------
|
||||
// Public Variables
|
||||
// ------------------------
|
||||
|
||||
uint16_t HAL_adc_result;
|
||||
|
||||
// ------------------------
|
||||
// Public functions
|
||||
// ------------------------
|
||||
|
||||
/* VGPV Done with defines
|
||||
// disable interrupts
|
||||
void cli(void) { noInterrupts(); }
|
||||
|
||||
// enable interrupts
|
||||
void sei(void) { interrupts(); }
|
||||
*/
|
||||
|
||||
void HAL_clear_reset_source(void) { __HAL_RCC_CLEAR_RESET_FLAGS(); }
|
||||
|
||||
uint8_t HAL_get_reset_source(void) {
|
||||
if (__HAL_RCC_GET_FLAG(RCC_FLAG_IWDGRST) != RESET)
|
||||
return RST_WATCHDOG;
|
||||
|
||||
if (__HAL_RCC_GET_FLAG(RCC_FLAG_SFTRST) != RESET)
|
||||
return RST_SOFTWARE;
|
||||
|
||||
if (__HAL_RCC_GET_FLAG(RCC_FLAG_PINRST) != RESET)
|
||||
return RST_EXTERNAL;
|
||||
|
||||
if (__HAL_RCC_GET_FLAG(RCC_FLAG_PORRST) != RESET)
|
||||
return RST_POWER_ON;
|
||||
return 0;
|
||||
}
|
||||
|
||||
void _delay_ms(const int delay_ms) { delay(delay_ms); }
|
||||
|
||||
extern "C" {
|
||||
extern unsigned int _ebss; // end of bss section
|
||||
}
|
||||
|
||||
// return free memory between end of heap (or end bss) and whatever is current
|
||||
|
||||
/*
|
||||
#include "wirish/syscalls.c"
|
||||
//extern caddr_t _sbrk(int incr);
|
||||
#ifndef CONFIG_HEAP_END
|
||||
extern char _lm_heap_end;
|
||||
#define CONFIG_HEAP_END ((caddr_t)&_lm_heap_end)
|
||||
#endif
|
||||
|
||||
extern "C" {
|
||||
static int freeMemory() {
|
||||
char top = 't';
|
||||
return &top - reinterpret_cast<char*>(sbrk(0));
|
||||
}
|
||||
int freeMemory() {
|
||||
int free_memory;
|
||||
int heap_end = (int)_sbrk(0);
|
||||
free_memory = ((int)&free_memory) - ((int)heap_end);
|
||||
return free_memory;
|
||||
}
|
||||
}
|
||||
*/
|
||||
|
||||
// ------------------------
|
||||
// ADC
|
||||
// ------------------------
|
||||
|
||||
void HAL_adc_start_conversion(const uint8_t adc_pin) {
|
||||
HAL_adc_result = analogRead(adc_pin);
|
||||
}
|
||||
|
||||
uint16_t HAL_adc_get_result(void) {
|
||||
return HAL_adc_result;
|
||||
}
|
||||
|
||||
#endif // STM32F7
|
||||
@ -1,208 +0,0 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
*
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
||||
* Copyright (c) 2017 Victor Perez
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#define CPU_32_BIT
|
||||
|
||||
#ifndef vsnprintf_P
|
||||
#define vsnprintf_P vsnprintf
|
||||
#endif
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include "../shared/Marduino.h"
|
||||
#include "../shared/math_32bit.h"
|
||||
#include "../shared/HAL_SPI.h"
|
||||
|
||||
#include "fastio_STM32F7.h"
|
||||
#include "watchdog_STM32F7.h"
|
||||
|
||||
#include "HAL_timers_STM32F7.h"
|
||||
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
// ------------------------
|
||||
// Defines
|
||||
// ------------------------
|
||||
|
||||
//Serial override
|
||||
//extern HalSerial usb_serial;
|
||||
|
||||
#if !WITHIN(SERIAL_PORT, -1, 6)
|
||||
#error "SERIAL_PORT must be from -1 to 6"
|
||||
#endif
|
||||
#if SERIAL_PORT == -1
|
||||
#define MYSERIAL0 SerialUSB
|
||||
#elif SERIAL_PORT == 1
|
||||
#define MYSERIAL0 SerialUART1
|
||||
#elif SERIAL_PORT == 2
|
||||
#define MYSERIAL0 SerialUART2
|
||||
#elif SERIAL_PORT == 3
|
||||
#define MYSERIAL0 SerialUART3
|
||||
#elif SERIAL_PORT == 4
|
||||
#define MYSERIAL0 SerialUART4
|
||||
#elif SERIAL_PORT == 5
|
||||
#define MYSERIAL0 SerialUART5
|
||||
#elif SERIAL_PORT == 6
|
||||
#define MYSERIAL0 SerialUART6
|
||||
#endif
|
||||
|
||||
#ifdef SERIAL_PORT_2
|
||||
#if !WITHIN(SERIAL_PORT_2, -1, 6)
|
||||
#error "SERIAL_PORT_2 must be from -1 to 6"
|
||||
#elif SERIAL_PORT_2 == SERIAL_PORT
|
||||
#error "SERIAL_PORT_2 must be different than SERIAL_PORT"
|
||||
#endif
|
||||
#define NUM_SERIAL 2
|
||||
#if SERIAL_PORT_2 == -1
|
||||
#define MYSERIAL1 SerialUSB
|
||||
#elif SERIAL_PORT_2 == 1
|
||||
#define MYSERIAL1 SerialUART1
|
||||
#elif SERIAL_PORT_2 == 2
|
||||
#define MYSERIAL1 SerialUART2
|
||||
#elif SERIAL_PORT_2 == 3
|
||||
#define MYSERIAL1 SerialUART3
|
||||
#elif SERIAL_PORT_2 == 4
|
||||
#define MYSERIAL1 SerialUART4
|
||||
#elif SERIAL_PORT_2 == 5
|
||||
#define MYSERIAL1 SerialUART5
|
||||
#elif SERIAL_PORT_2 == 6
|
||||
#define MYSERIAL1 SerialUART6
|
||||
#endif
|
||||
#else
|
||||
#define NUM_SERIAL 1
|
||||
#endif
|
||||
|
||||
#define _BV(b) (1 << (b))
|
||||
|
||||
/**
|
||||
* TODO: review this to return 1 for pins that are not analog input
|
||||
*/
|
||||
#ifndef analogInputToDigitalPin
|
||||
#define analogInputToDigitalPin(p) (p)
|
||||
#endif
|
||||
|
||||
#define CRITICAL_SECTION_START uint32_t primask = __get_PRIMASK(); __disable_irq()
|
||||
#define CRITICAL_SECTION_END if (!primask) __enable_irq()
|
||||
#define ISRS_ENABLED() (!__get_PRIMASK())
|
||||
#define ENABLE_ISRS() __enable_irq()
|
||||
#define DISABLE_ISRS() __disable_irq()
|
||||
#define cli() __disable_irq()
|
||||
#define sei() __enable_irq()
|
||||
|
||||
// On AVR this is in math.h?
|
||||
#define square(x) ((x)*(x))
|
||||
|
||||
#ifndef strncpy_P
|
||||
#define strncpy_P(dest, src, num) strncpy((dest), (src), (num))
|
||||
#endif
|
||||
|
||||
// Fix bug in pgm_read_ptr
|
||||
#undef pgm_read_ptr
|
||||
#define pgm_read_ptr(addr) (*(addr))
|
||||
|
||||
// ------------------------
|
||||
// Types
|
||||
// ------------------------
|
||||
|
||||
typedef int8_t pin_t;
|
||||
|
||||
// ------------------------
|
||||
// Public Variables
|
||||
// ------------------------
|
||||
|
||||
/** result of last ADC conversion */
|
||||
extern uint16_t HAL_adc_result;
|
||||
|
||||
// ------------------------
|
||||
// Public functions
|
||||
// ------------------------
|
||||
|
||||
// Memory related
|
||||
#define __bss_end __bss_end__
|
||||
|
||||
inline void HAL_init(void) { }
|
||||
|
||||
/** clear reset reason */
|
||||
void HAL_clear_reset_source (void);
|
||||
|
||||
/** reset reason */
|
||||
uint8_t HAL_get_reset_source(void);
|
||||
|
||||
void _delay_ms(const int delay);
|
||||
|
||||
/*
|
||||
extern "C" {
|
||||
int freeMemory(void);
|
||||
}
|
||||
*/
|
||||
|
||||
extern "C" char* _sbrk(int incr);
|
||||
/*
|
||||
static int freeMemory() {
|
||||
volatile int top;
|
||||
top = (int)((char*)&top - reinterpret_cast<char*>(_sbrk(0)));
|
||||
return top;
|
||||
}
|
||||
*/
|
||||
static int freeMemory() {
|
||||
volatile char top;
|
||||
return &top - reinterpret_cast<char*>(_sbrk(0));
|
||||
}
|
||||
|
||||
// SPI: Extended functions which take a channel number (hardware SPI only)
|
||||
/** Write single byte to specified SPI channel */
|
||||
void spiSend(uint32_t chan, byte b);
|
||||
/** Write buffer to specified SPI channel */
|
||||
void spiSend(uint32_t chan, const uint8_t* buf, size_t n);
|
||||
/** Read single byte from specified SPI channel */
|
||||
uint8_t spiRec(uint32_t chan);
|
||||
|
||||
|
||||
// EEPROM
|
||||
|
||||
/**
|
||||
* TODO: Write all this eeprom stuff. Can emulate eeprom in flash as last resort.
|
||||
* Wire library should work for i2c eeproms.
|
||||
*/
|
||||
void eeprom_write_byte(uint8_t *pos, unsigned char value);
|
||||
uint8_t eeprom_read_byte(uint8_t *pos);
|
||||
void eeprom_read_block (void *__dst, const void *__src, size_t __n);
|
||||
void eeprom_update_block (const void *__src, void *__dst, size_t __n);
|
||||
|
||||
// ADC
|
||||
|
||||
#define HAL_ANALOG_SELECT(pin) pinMode(pin, INPUT)
|
||||
|
||||
inline void HAL_adc_init(void) {}
|
||||
|
||||
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
|
||||
#define HAL_READ_ADC() HAL_adc_result
|
||||
#define HAL_ADC_READY() true
|
||||
|
||||
void HAL_adc_start_conversion(const uint8_t adc_pin);
|
||||
uint16_t HAL_adc_get_result(void);
|
||||
|
||||
#define GET_PIN_MAP_PIN(index) index
|
||||
#define GET_PIN_MAP_INDEX(pin) pin
|
||||
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
|
||||
@ -1,37 +0,0 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
* Copyright (c) 2017 Victor Perez
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include <../../libraries/Servo/src/Servo.h>
|
||||
|
||||
// Inherit and expand on the official library
|
||||
class libServo : public Servo {
|
||||
public:
|
||||
int8_t attach(const int pin);
|
||||
int8_t attach(const int pin, const int min, const int max);
|
||||
void move(const int value);
|
||||
private:
|
||||
uint16_t min_ticks;
|
||||
uint16_t max_ticks;
|
||||
uint8_t servoIndex; // index into the channel data for this servo
|
||||
};
|
||||
@ -1,160 +0,0 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
* Copyright (c) 2017 Victor Perez
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Software SPI functions originally from Arduino Sd2Card Library
|
||||
* Copyright (c) 2009 by William Greiman
|
||||
*/
|
||||
|
||||
/**
|
||||
* Adapted to the STM32F7 HAL
|
||||
*/
|
||||
|
||||
#ifdef STM32F7
|
||||
|
||||
#include "HAL.h"
|
||||
#include "../shared/HAL_SPI.h"
|
||||
#include <pins_arduino.h>
|
||||
#include "spi_pins.h"
|
||||
#include "../../core/macros.h"
|
||||
#include <SPI.h>
|
||||
|
||||
// ------------------------
|
||||
// Public Variables
|
||||
// ------------------------
|
||||
|
||||
static SPISettings spiConfig;
|
||||
|
||||
// ------------------------
|
||||
// Public functions
|
||||
// ------------------------
|
||||
|
||||
#if ENABLED(SOFTWARE_SPI)
|
||||
// ------------------------
|
||||
// Software SPI
|
||||
// ------------------------
|
||||
#error "Software SPI not supported for STM32F7. Use hardware SPI."
|
||||
|
||||
#else
|
||||
|
||||
// ------------------------
|
||||
// Hardware SPI
|
||||
// ------------------------
|
||||
|
||||
/**
|
||||
* VGPV SPI speed start and F_CPU/2, by default 72/2 = 36Mhz
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Begin SPI port setup
|
||||
*
|
||||
* @return Nothing
|
||||
*
|
||||
* @details Only configures SS pin since libmaple creates and initialize the SPI object
|
||||
*/
|
||||
void spiBegin(void) {
|
||||
#if !PIN_EXISTS(SS)
|
||||
#error SS_PIN not defined!
|
||||
#endif
|
||||
|
||||
OUT_WRITE(SS_PIN, HIGH);
|
||||
}
|
||||
|
||||
/** Configure SPI for specified SPI speed */
|
||||
void spiInit(uint8_t spiRate) {
|
||||
// Use datarates Marlin uses
|
||||
uint32_t clock;
|
||||
switch (spiRate) {
|
||||
case SPI_FULL_SPEED: clock = 20000000; break; // 13.9mhz=20000000 6.75mhz=10000000 3.38mhz=5000000 .833mhz=1000000
|
||||
case SPI_HALF_SPEED: clock = 5000000; break;
|
||||
case SPI_QUARTER_SPEED: clock = 2500000; break;
|
||||
case SPI_EIGHTH_SPEED: clock = 1250000; break;
|
||||
case SPI_SPEED_5: clock = 625000; break;
|
||||
case SPI_SPEED_6: clock = 300000; break;
|
||||
default:
|
||||
clock = 4000000; // Default from the SPI libarary
|
||||
}
|
||||
spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0);
|
||||
SPI.begin();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Receives a single byte from the SPI port.
|
||||
*
|
||||
* @return Byte received
|
||||
*
|
||||
* @details
|
||||
*/
|
||||
uint8_t spiRec(void) {
|
||||
SPI.beginTransaction(spiConfig);
|
||||
uint8_t returnByte = SPI.transfer(0xFF);
|
||||
SPI.endTransaction();
|
||||
return returnByte;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Receives a number of bytes from the SPI port to a buffer
|
||||
*
|
||||
* @param buf Pointer to starting address of buffer to write to.
|
||||
* @param nbyte Number of bytes to receive.
|
||||
* @return Nothing
|
||||
*
|
||||
* @details Uses DMA
|
||||
*/
|
||||
void spiRead(uint8_t* buf, uint16_t nbyte) {
|
||||
SPI.beginTransaction(spiConfig);
|
||||
SPI.dmaTransfer(0, const_cast<uint8_t*>(buf), nbyte);
|
||||
SPI.endTransaction();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Sends a single byte on SPI port
|
||||
*
|
||||
* @param b Byte to send
|
||||
*
|
||||
* @details
|
||||
*/
|
||||
void spiSend(uint8_t b) {
|
||||
SPI.beginTransaction(spiConfig);
|
||||
SPI.transfer(b);
|
||||
SPI.endTransaction();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Write token and then write from 512 byte buffer to SPI (for SD card)
|
||||
*
|
||||
* @param buf Pointer with buffer start address
|
||||
* @return Nothing
|
||||
*
|
||||
* @details Use DMA
|
||||
*/
|
||||
void spiSendBlock(uint8_t token, const uint8_t* buf) {
|
||||
SPI.beginTransaction(spiConfig);
|
||||
SPI.transfer(token);
|
||||
SPI.dmaSend(const_cast<uint8_t*>(buf), 512);
|
||||
SPI.endTransaction();
|
||||
}
|
||||
|
||||
#endif // SOFTWARE_SPI
|
||||
|
||||
#endif // STM32F7
|
||||
@ -1,37 +0,0 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Test STM32F7-specific configuration values for errors at compile-time.
|
||||
*/
|
||||
//#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
|
||||
// #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
|
||||
//#endif
|
||||
|
||||
#if ENABLED(EMERGENCY_PARSER)
|
||||
#error "EMERGENCY_PARSER is not yet implemented for STM32F7. Disable EMERGENCY_PARSER to continue."
|
||||
#endif
|
||||
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
#error "FAST_PWM_FAN is not yet implemented for this platform."
|
||||
#endif
|
||||
@ -1,64 +0,0 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
* Copyright (c) 2017 Victor Perez
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "../../module/endstops.h"
|
||||
|
||||
// One ISR for all EXT-Interrupts
|
||||
void endstop_ISR(void) { endstops.update(); }
|
||||
|
||||
void setup_endstop_interrupts(void) {
|
||||
#if HAS_X_MAX
|
||||
attachInterrupt(X_MAX_PIN, endstop_ISR, CHANGE);
|
||||
#endif
|
||||
#if HAS_X_MIN
|
||||
attachInterrupt(X_MIN_PIN, endstop_ISR, CHANGE);
|
||||
#endif
|
||||
#if HAS_Y_MAX
|
||||
attachInterrupt(Y_MAX_PIN, endstop_ISR, CHANGE);
|
||||
#endif
|
||||
#if HAS_Y_MIN
|
||||
attachInterrupt(Y_MIN_PIN, endstop_ISR, CHANGE);
|
||||
#endif
|
||||
#if HAS_Z_MAX
|
||||
attachInterrupt(Z_MAX_PIN, endstop_ISR, CHANGE);
|
||||
#endif
|
||||
#if HAS_Z_MIN
|
||||
attachInterrupt(Z_MIN_PIN, endstop_ISR, CHANGE);
|
||||
#endif
|
||||
#if HAS_Z2_MAX
|
||||
attachInterrupt(Z2_MAX_PIN, endstop_ISR, CHANGE);
|
||||
#endif
|
||||
#if HAS_Z2_MIN
|
||||
attachInterrupt(Z2_MIN_PIN, endstop_ISR, CHANGE);
|
||||
#endif
|
||||
#if HAS_Z3_MAX
|
||||
attachInterrupt(Z3_MAX_PIN, endstop_ISR, CHANGE);
|
||||
#endif
|
||||
#if HAS_Z3_MIN
|
||||
attachInterrupt(Z3_MIN_PIN, endstop_ISR, CHANGE);
|
||||
#endif
|
||||
#if HAS_Z_MIN_PROBE_PIN
|
||||
attachInterrupt(Z_MIN_PROBE_PIN, endstop_ISR, CHANGE);
|
||||
#endif
|
||||
}
|
||||
@ -1,27 +0,0 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Define SPI Pins: SCK, MISO, MOSI, SS
|
||||
*/
|
||||
#define SCK_PIN PA5
|
||||
#define MISO_PIN PA6
|
||||
#define MOSI_PIN PA7
|
||||
#define SS_PIN PA8
|
||||
@ -1,52 +0,0 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifdef STM32F7
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
|
||||
#if ENABLED(USE_WATCHDOG)
|
||||
|
||||
#include "watchdog_STM32F7.h"
|
||||
|
||||
IWDG_HandleTypeDef hiwdg;
|
||||
|
||||
void watchdog_init() {
|
||||
hiwdg.Instance = IWDG;
|
||||
hiwdg.Init.Prescaler = IWDG_PRESCALER_32; //32kHz LSI clock and 32x prescalar = 1024Hz IWDG clock
|
||||
hiwdg.Init.Reload = 4095; //4095 counts = 4 seconds at 1024Hz
|
||||
if (HAL_IWDG_Init(&hiwdg) != HAL_OK) {
|
||||
//Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
void watchdog_reset() {
|
||||
/* Refresh IWDG: reload counter */
|
||||
if (HAL_IWDG_Refresh(&hiwdg) != HAL_OK) {
|
||||
/* Refresh Error */
|
||||
//Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
#endif // USE_WATCHDOG
|
||||
|
||||
#endif // STM32F7
|
||||
@ -0,0 +1,6 @@
|
||||
# This HAL is for...
|
||||
|
||||
- STM32F407 MCU with STM32Generic Arduino core by danieleff.
|
||||
- STM32F765 board "The Borg" with STM32Generic.
|
||||
|
||||
See the `README.md` files in HAL_STM32F4 and HAL_STM32F7 for the specifics of those hals.
|
||||
Loading…
Reference in New Issue