Implement servo support for STM32F1 (#11580)

Implement servo support for STM32F1. Original code was incomplete and depended on Servo library from stm32duino which conflicts with `module/servo.h`.

Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.cpp

@@ -27,22 +27,88 @@
 
 #if HAS_SERVOS
 
+uint8_t ServoCount; //=0
+
 #include "HAL_Servo_Stm32f1.h"
 
-int8_t libServo::attach(const int pin) {
-  if (this->servoIndex >= MAX_SERVOS) return -1;
-  return Servo::attach(pin);
+//#include "Servo.h"
+
+#include <boards.h>
+#include <io.h>
+#include <pwm.h>
+#include <wirish_math.h>
+
+/**
+ * 20 millisecond period config. For a 1-based prescaler,
+ *
+ *    (prescaler * overflow / CYC_MSEC) msec = 1 timer cycle = 20 msec
+ * => prescaler * overflow = 20 * CYC_MSEC
+ *
+ * This uses the smallest prescaler that allows an overflow < 2^16.
+ */
+#define MAX_OVERFLOW    ((1 << 16) - 1)
+#define CYC_MSEC        (1000 * CYCLES_PER_MICROSECOND)
+#define TAU_MSEC        20
+#define TAU_USEC        (TAU_MSEC * 1000)
+#define TAU_CYC         (TAU_MSEC * CYC_MSEC)
+#define SERVO_PRESCALER (TAU_CYC / MAX_OVERFLOW + 1)
+#define SERVO_OVERFLOW  ((uint16)round((double)TAU_CYC / SERVO_PRESCALER))
+
+// Unit conversions
+#define US_TO_COMPARE(us) ((uint16)map((us), 0, TAU_USEC, 0, SERVO_OVERFLOW))
+#define COMPARE_TO_US(c)  ((uint32)map((c), 0, SERVO_OVERFLOW, 0, TAU_USEC))
+#define ANGLE_TO_US(a)    ((uint16)(map((a), this->minAngle, this->maxAngle, \
+                                        SERVO_DEFAULT_MIN_PW, SERVO_DEFAULT_MAX_PW)))
+#define US_TO_ANGLE(us)   ((int16)(map((us), SERVO_DEFAULT_MIN_PW, SERVO_DEFAULT_MAX_PW,  \
+                                       this->minAngle, this->maxAngle)))
+
+libServo::libServo() {
+  this->servoIndex = ServoCount < MAX_SERVOS ? ServoCount++ : INVALID_SERVO;
+}
+
+bool libServo::attach(const int32_t pin, const int32_t minAngle, const int32_t maxAngle) {
+  if (this->servoIndex >= MAX_SERVOS) return false;
+
+  this->pin = pin;
+  this->minAngle = minAngle;
+  this->maxAngle = maxAngle;
+
+  timer_dev *tdev = PIN_MAP[this->pin].timer_device;
+  uint8 tchan = PIN_MAP[this->pin].timer_channel;
+
+  pinMode(this->pin, PWM);
+  pwmWrite(this->pin, 0);
+
+  timer_pause(tdev);
+  timer_set_prescaler(tdev, SERVO_PRESCALER - 1); // prescaler is 1-based
+  timer_set_reload(tdev, SERVO_OVERFLOW);
+  timer_generate_update(tdev);
+  timer_resume(tdev);
+
+  return true;
 }
 
-int8_t libServo::attach(const int pin, const int min, const int max) {
-  return Servo::attach(pin, min, max);
+bool libServo::detach() {
+  if (!this->attached()) return false;
+  pwmWrite(this->pin, 0);
+  return true;
 }
 
-void libServo::move(const int value) {
+int32_t libServo::read() const {
+  if (this->attached()) {
+    timer_dev *tdev = PIN_MAP[this->pin].timer_device;
+    uint8 tchan = PIN_MAP[this->pin].timer_channel;
+    return US_TO_ANGLE(COMPARE_TO_US(timer_get_compare(tdev, tchan)));
+  }
+  return 0;
+}
+
+void libServo::move(const int32_t value) {
   constexpr uint16_t servo_delay[] = SERVO_DELAY;
   static_assert(COUNT(servo_delay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long.");
-  if (this->attach(0) >= 0) {
-    this->write(value);
+
+  if (this->attached()) {
+    pwmWrite(this->pin, US_TO_COMPARE(ANGLE_TO_US(constrain(value, this->minAngle, this->maxAngle))));
     safe_delay(servo_delay[this->servoIndex]);
     #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE)
       this->detach();

Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.h

@@ -24,19 +24,34 @@
 #ifndef HAL_SERVO_STM32F1_H
 #define HAL_SERVO_STM32F1_H
 
-// Path needed, otherwise HAL version is used
-#include <../../libraries/Servo/src/Servo.h>
+// Pin number of unattached pins
+#define NOT_ATTACHED                    (-1)
+#define INVALID_SERVO                   255
 
-// Inherit and expand on the official library
-class libServo : public Servo {
-public:
-    int8_t attach(const int pin);
-    int8_t attach(const int pin, const int min, const int max);
-    void move(const int value);
-private:
-    uint16_t min_ticks;
-    uint16_t max_ticks;
+#ifndef MAX_SERVOS
+  #define MAX_SERVOS 3
+#endif
+
+#define SERVO_DEFAULT_MIN_PW            544
+#define SERVO_DEFAULT_MAX_PW            2400
+#define SERVO_DEFAULT_MIN_ANGLE         0
+#define SERVO_DEFAULT_MAX_ANGLE         180
+
+#define HAL_SERVO_LIB libServo
+
+class libServo {
+  public:
+    libServo();
+    bool attach(const int32_t pin, const int32_t minAngle=SERVO_DEFAULT_MIN_ANGLE, const int32_t maxAngle=SERVO_DEFAULT_MAX_ANGLE);
+    bool attached() const { return this->pin != NOT_ATTACHED; }
+    bool detach();
+    void move(const int32_t value);
+    int32_t read() const;
+  private:
     uint8_t servoIndex;               // index into the channel data for this servo
+    int32_t pin = NOT_ATTACHED;
+    int32_t minAngle;
+    int32_t maxAngle;
 };
 
 #endif // HAL_SERVO_STM32F1_H

Marlin/src/HAL/shared/servo.cpp

@@ -53,7 +53,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if HAS_SERVOS && !(IS_32BIT_TEENSY || defined(TARGET_LPC1768) || defined(STM32F4) || defined(STM32F4xx))
+#if HAS_SERVOS && !(IS_32BIT_TEENSY || defined(TARGET_LPC1768) || defined(STM32F1) || defined(STM32F1xx) || defined(STM32F4) || defined(STM32F4xx))
 
 //#include <Arduino.h>
 #include "servo.h"

Marlin/src/HAL/shared/servo.h

@@ -74,6 +74,8 @@
 
 #elif defined(TARGET_LPC1768)
   #include "../HAL_LPC1768/LPC1768_Servo.h"
+#elif defined(STM32F1) || defined(STM32F1xx)
+  #include "../HAL_STM32F1/HAL_Servo_STM32F1.h"
 #elif defined(STM32F4) || defined(STM32F4xx)
   #include "../HAL_STM32F4/HAL_Servo_STM32F4.h"
 #else