Remove obsolete TMC_USE_CHAIN

5 years ago · 94d3153fb6
parent ca1a3476cb
commit 94d3153fb6
56 changed files with 0 additions and 112 deletions
--- a/X1/Configuration_adv.h
+++ b/X1/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/FYSETC/AIO_II/Configuration_adv.h
+++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/1.2/BLTouch/Configuration_adv.h
+++ b/1.2/BLTouch/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/FYSETC/Cheetah
+++ b/config/examples/FYSETC/Cheetah
@ -1844,8 +1844,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
@ -1844,8 +1844,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/FYSETC/F6_13/Configuration_adv.h
+++ b/config/examples/FYSETC/F6_13/Configuration_adv.h
@ -1831,8 +1831,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@ -1844,8 +1844,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@ -1847,8 +1847,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@ -1849,8 +1849,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@ -1849,8 +1849,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@ -1844,8 +1844,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Geeetech/Prusa
+++ b/config/examples/Geeetech/Prusa
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Geeetech/Prusa
+++ b/config/examples/Geeetech/Prusa
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/HMS434/Configuration_adv.h
+++ b/config/examples/HMS434/Configuration_adv.h
@ -1781,8 +1781,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/JGAurora/A1/Configuration_adv.h
+++ b/config/examples/JGAurora/A1/Configuration_adv.h
@ -1850,8 +1850,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/JGAurora/A5S/Configuration_adv.h
+++ b/config/examples/JGAurora/A5S/Configuration_adv.h
@ -1850,8 +1850,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@ -1846,8 +1846,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Tevo/Michelangelo/Configuration_adv.h
+++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h
@ -1844,8 +1844,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Tevo/Tarantula
+++ b/config/examples/Tevo/Tarantula
@ -1841,8 +1841,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Tevo/Tornado/V1
+++ b/config/examples/Tevo/Tornado/V1
@ -1844,8 +1844,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Tevo/Tornado/V2
+++ b/config/examples/Tevo/Tornado/V2
@ -1844,8 +1844,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@ -1858,8 +1858,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Wanhao/Duplicator
+++ b/config/examples/Wanhao/Duplicator
@ -1847,8 +1847,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/Wanhao/Duplicator
+++ b/config/examples/Wanhao/Duplicator
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@ -1845,8 +1845,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@ -1846,8 +1846,6 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.