Add pins for Lerdge X and K. (#15271)
J.C. Nelson
5 years ago
committed by
Scott Lahteine
parent
c96844fae2
commit
896162b722
@ -0,0 +1,184 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#if !defined(STM32F4) && !defined(STM32F4xx)
|
||||
#error "Oops! Select an STM32F4 board in 'Tools > Board.'"
|
||||
#elif HOTENDS > 2 || E_STEPPERS > 2
|
||||
#error "LERDGE K supports up to 2 hotends / E-steppers."
|
||||
#endif
|
||||
|
||||
#define BOARD_INFO_NAME "Lerdge K"
|
||||
#define DEFAULT_MACHINE_NAME "LERDGE"
|
||||
|
||||
#define I2C_EEPROM
|
||||
|
||||
// Ignore temp readings during develpment.
|
||||
//#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
//#define SERVO0_PIN PD12
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PG3
|
||||
#define Y_STOP_PIN PG4
|
||||
#define Z_STOP_PIN PG5
|
||||
|
||||
//
|
||||
// Z Probe (when not Z_MIN_PIN)
|
||||
//
|
||||
//#ifndef Z_MIN_PROBE_PIN
|
||||
// #define Z_MIN_PROBE_PIN PB15
|
||||
//#endif
|
||||
|
||||
//
|
||||
// Filament runout
|
||||
//
|
||||
#define FIL_RUNOUT_PIN PE6
|
||||
#define FIL_RUNOUT2_PIN PE7
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN PG1
|
||||
#define X_DIR_PIN PB10
|
||||
#define X_ENABLE_PIN PG0
|
||||
//#ifndef X_CS_PIN
|
||||
// #define X_CS_PIN PE0
|
||||
//#endif
|
||||
|
||||
#define Y_STEP_PIN PF14
|
||||
#define Y_DIR_PIN PF15
|
||||
#define Y_ENABLE_PIN PF13
|
||||
//#ifndef Y_CS_PIN
|
||||
// #define Y_CS_PIN PE1
|
||||
//#endif
|
||||
|
||||
#define Z_STEP_PIN PF11
|
||||
#define Z_DIR_PIN PF12
|
||||
#define Z_ENABLE_PIN PC5
|
||||
//#ifndef Z_CS_PIN
|
||||
// #define Z_CS_PIN PE2
|
||||
//#endif
|
||||
|
||||
#define E0_STEP_PIN PC14
|
||||
#define E0_DIR_PIN PC13
|
||||
#define E0_ENABLE_PIN PC15
|
||||
//#ifndef E0_CS_PIN
|
||||
// #define E0_CS_PIN PE3
|
||||
//#endif
|
||||
|
||||
#define E1_STEP_PIN PF1
|
||||
#define E1_DIR_PIN PF0
|
||||
#define E1_ENABLE_PIN PF2
|
||||
//#ifndef E1_CS_PIN
|
||||
// #define E1_CS_PIN PE4
|
||||
//#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PC1 // Analog Input
|
||||
#define TEMP_1_PIN PC2 // Analog Input
|
||||
#define TEMP_BED_PIN PC0 // Analog Input
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PA1
|
||||
#define HEATER_1_PIN PA0
|
||||
#define HEATER_BED_PIN PA2
|
||||
|
||||
#ifndef FAN_PIN
|
||||
#define FAN_PIN PC15
|
||||
#endif
|
||||
#define FAN1_PIN PF6
|
||||
#define FAN2_PIN PF7
|
||||
|
||||
#define ORIG_E0_AUTO_FAN_PIN FAN1_PIN // Use this by NOT overriding E0_AUTO_FAN_PIN
|
||||
|
||||
//
|
||||
// LED / Lighting
|
||||
//
|
||||
//#define CASE_LIGHT_PIN_CI -1
|
||||
//#define CASE_LIGHT_PIN_DO -1
|
||||
//#define NEOPIXEL_PIN -1
|
||||
|
||||
//
|
||||
// Prusa i3 MK2 Multi-Material Multiplexer Support
|
||||
//
|
||||
//#define E_MUX0_PIN -1
|
||||
//#define E_MUX1_PIN -1
|
||||
|
||||
//
|
||||
// SD support
|
||||
//
|
||||
#define SDIO_SUPPORT
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define SDSS PC11
|
||||
#define LED_PIN PC7 // Alive
|
||||
#define PS_ON_PIN -1
|
||||
#define KILL_PIN -1
|
||||
#define POWER_LOSS_PIN -1 // Power-loss / nAC_FAULT
|
||||
|
||||
#define SCK_PIN PC12
|
||||
#define MISO_PIN PC8
|
||||
#define MOSI_PIN PD2
|
||||
#define SS_PIN PC11
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
|
||||
// TODO: Replace these with the correct FSMC pins, once known
|
||||
#define SD_DETECT_PIN -1
|
||||
#define BEEPER_PIN PD12
|
||||
#define LCD_PINS_RS -1
|
||||
#define LCD_PINS_ENABLE -1
|
||||
#define LCD_PINS_D4 -1
|
||||
#define LCD_PINS_D5 -1
|
||||
#define LCD_PINS_D6 -1
|
||||
#define LCD_PINS_D7 -1
|
||||
|
||||
#define BTN_EN1 PE3
|
||||
#define BTN_EN2 PE4
|
||||
#define BTN_ENC PE2
|
||||
|
||||
//
|
||||
// ST7920 Delays
|
||||
//
|
||||
#ifndef ST7920_DELAY_1
|
||||
#define ST7920_DELAY_1 DELAY_NS(96)
|
||||
#endif
|
||||
#ifndef ST7920_DELAY_2
|
||||
#define ST7920_DELAY_2 DELAY_NS(48)
|
||||
#endif
|
||||
#ifndef ST7920_DELAY_3
|
||||
#define ST7920_DELAY_3 DELAY_NS(715)
|
||||
#endif
|
||||
@ -0,0 +1,181 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#if !defined(STM32F4) && !defined(STM32F4xx)
|
||||
#error "Oops! Select an STM32F4 board in 'Tools > Board.'"
|
||||
#elif HOTENDS > 2 || E_STEPPERS > 2
|
||||
#error "LERDGE X supports up to 2 hotends / E-steppers."
|
||||
#endif
|
||||
|
||||
#define BOARD_INFO_NAME "Lerdge X"
|
||||
#define DEFAULT_MACHINE_NAME "LERDGE"
|
||||
|
||||
//#define I2C_EEPROM
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
//#define SERVO0_PIN PD12
|
||||
//#define SERVO1_PIN -1
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PB12
|
||||
#define Y_STOP_PIN PB13
|
||||
#define Z_STOP_PIN PB14
|
||||
|
||||
//
|
||||
// Filament runout
|
||||
//
|
||||
#define FIL_RUNOUT_PIN PE1
|
||||
|
||||
//
|
||||
// Z Probe (when not Z_MIN_PIN)
|
||||
//
|
||||
//#ifndef Z_MIN_PROBE_PIN
|
||||
// #define Z_MIN_PROBE_PIN PB15
|
||||
//#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN PB10
|
||||
#define X_DIR_PIN PB2
|
||||
#define X_ENABLE_PIN PB11
|
||||
//#ifndef X_CS_PIN
|
||||
// #define X_CS_PIN PD1
|
||||
//#endif
|
||||
|
||||
#define Y_STEP_PIN PB0
|
||||
#define Y_DIR_PIN PC5
|
||||
#define Y_ENABLE_PIN PB1
|
||||
//#ifndef Y_CS_PIN
|
||||
// #define Y_CS_PIN PE12
|
||||
//#endif
|
||||
|
||||
#define Z_STEP_PIN PA7
|
||||
#define Z_DIR_PIN PA6
|
||||
#define Z_ENABLE_PIN PC4
|
||||
//#ifndef Z_CS_PIN
|
||||
// #define Z_CS_PIN PD5
|
||||
//#endif
|
||||
|
||||
#define E0_STEP_PIN PA4
|
||||
#define E0_DIR_PIN PA3
|
||||
#define E0_ENABLE_PIN PA5
|
||||
//#ifndef E0_CS_PIN
|
||||
// #define E0_CS_PIN PB4
|
||||
//#endif
|
||||
|
||||
#define E1_STEP_PIN -1
|
||||
#define E1_DIR_PIN -1
|
||||
#define E1_ENABLE_PIN -1
|
||||
//#ifndef E1_CS_PIN
|
||||
// #define E1_CS_PIN PE5
|
||||
//#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PC0 // Analog Input
|
||||
#define TEMP_1_PIN -1 // Analog Input
|
||||
#define TEMP_BED_PIN PC1 // Analog Input
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PA1
|
||||
#define HEATER_1_PIN -1
|
||||
#define HEATER_BED_PIN PA2
|
||||
|
||||
#ifndef FAN_PIN
|
||||
// #define FAN_PIN PC15
|
||||
#endif
|
||||
#define FAN1_PIN PC15
|
||||
#define FAN2_PIN PA0
|
||||
|
||||
#define ORIG_E0_AUTO_FAN_PIN PC15 // Use this by NOT overriding E0_AUTO_FAN_PIN
|
||||
|
||||
//
|
||||
// Prusa i3 MK2 Multi Material Multiplexer Support
|
||||
//
|
||||
//#define E_MUX0_PIN -1
|
||||
//#define E_MUX1_PIN -1
|
||||
|
||||
//
|
||||
// LED / Lighting
|
||||
//
|
||||
//#define CASE_LIGHT_PIN_CI -1
|
||||
//#define CASE_LIGHT_PIN_DO -1
|
||||
//#define NEOPIXEL_PIN -1
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define SDSS PC11
|
||||
#define LED_PIN PC7 // Alive
|
||||
#define PS_ON_PIN -1
|
||||
#define KILL_PIN -1
|
||||
#define POWER_LOSS_PIN -1 // Power-loss / nAC_FAULT
|
||||
|
||||
#define SCK_PIN PC12
|
||||
#define MISO_PIN PC8
|
||||
#define MOSI_PIN PD2
|
||||
#define SS_PIN PC11
|
||||
|
||||
//
|
||||
// SD support
|
||||
//
|
||||
#define SDIO_SUPPORT
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
|
||||
// The LCD is initialized in FSMC mode
|
||||
#define SD_DETECT_PIN -1
|
||||
#define BEEPER_PIN PD12
|
||||
|
||||
#define BTN_EN1 PE3
|
||||
#define BTN_EN2 PE4
|
||||
#define BTN_ENC PE2
|
||||
|
||||
#define LCD_RESET_PIN PD6
|
||||
#define LCD_BACKLIGHT_PIN PD3
|
||||
#define FSMC_CS_PIN PD4
|
||||
#define FSMC_RS_PIN PD11
|
||||
#define TOUCH_CS PB6
|
||||
|
||||
//
|
||||
// ST7920 Delays
|
||||
//
|
||||
#ifndef ST7920_DELAY_1
|
||||
#define ST7920_DELAY_1 DELAY_NS(96)
|
||||
#endif
|
||||
#ifndef ST7920_DELAY_2
|
||||
#define ST7920_DELAY_2 DELAY_NS(48)
|
||||
#endif
|
||||
#ifndef ST7920_DELAY_3
|
||||
#define ST7920_DELAY_3 DELAY_NS(715)
|
||||
#endif
|
||||
Loading…
Reference in New Issue