Scott Lahteine
8 years ago
committed by
GitHub
commit
64a44f697c
@ -0,0 +1,89 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// 100k bed thermistor
|
||||
const short temptable_1[][2] PROGMEM = {
|
||||
{ 23 * OVERSAMPLENR, 300 },
|
||||
{ 25 * OVERSAMPLENR, 295 },
|
||||
{ 27 * OVERSAMPLENR, 290 },
|
||||
{ 28 * OVERSAMPLENR, 285 },
|
||||
{ 31 * OVERSAMPLENR, 280 },
|
||||
{ 33 * OVERSAMPLENR, 275 },
|
||||
{ 35 * OVERSAMPLENR, 270 },
|
||||
{ 38 * OVERSAMPLENR, 265 },
|
||||
{ 41 * OVERSAMPLENR, 260 },
|
||||
{ 44 * OVERSAMPLENR, 255 },
|
||||
{ 48 * OVERSAMPLENR, 250 },
|
||||
{ 52 * OVERSAMPLENR, 245 },
|
||||
{ 56 * OVERSAMPLENR, 240 },
|
||||
{ 61 * OVERSAMPLENR, 235 },
|
||||
{ 66 * OVERSAMPLENR, 230 },
|
||||
{ 71 * OVERSAMPLENR, 225 },
|
||||
{ 78 * OVERSAMPLENR, 220 },
|
||||
{ 84 * OVERSAMPLENR, 215 },
|
||||
{ 92 * OVERSAMPLENR, 210 },
|
||||
{ 100 * OVERSAMPLENR, 205 },
|
||||
{ 109 * OVERSAMPLENR, 200 },
|
||||
{ 120 * OVERSAMPLENR, 195 },
|
||||
{ 131 * OVERSAMPLENR, 190 },
|
||||
{ 143 * OVERSAMPLENR, 185 },
|
||||
{ 156 * OVERSAMPLENR, 180 },
|
||||
{ 171 * OVERSAMPLENR, 175 },
|
||||
{ 187 * OVERSAMPLENR, 170 },
|
||||
{ 205 * OVERSAMPLENR, 165 },
|
||||
{ 224 * OVERSAMPLENR, 160 },
|
||||
{ 245 * OVERSAMPLENR, 155 },
|
||||
{ 268 * OVERSAMPLENR, 150 },
|
||||
{ 293 * OVERSAMPLENR, 145 },
|
||||
{ 320 * OVERSAMPLENR, 140 },
|
||||
{ 348 * OVERSAMPLENR, 135 },
|
||||
{ 379 * OVERSAMPLENR, 130 },
|
||||
{ 411 * OVERSAMPLENR, 125 },
|
||||
{ 445 * OVERSAMPLENR, 120 },
|
||||
{ 480 * OVERSAMPLENR, 115 },
|
||||
{ 516 * OVERSAMPLENR, 110 },
|
||||
{ 553 * OVERSAMPLENR, 105 },
|
||||
{ 591 * OVERSAMPLENR, 100 },
|
||||
{ 628 * OVERSAMPLENR, 95 },
|
||||
{ 665 * OVERSAMPLENR, 90 },
|
||||
{ 702 * OVERSAMPLENR, 85 },
|
||||
{ 737 * OVERSAMPLENR, 80 },
|
||||
{ 770 * OVERSAMPLENR, 75 },
|
||||
{ 801 * OVERSAMPLENR, 70 },
|
||||
{ 830 * OVERSAMPLENR, 65 },
|
||||
{ 857 * OVERSAMPLENR, 60 },
|
||||
{ 881 * OVERSAMPLENR, 55 },
|
||||
{ 903 * OVERSAMPLENR, 50 },
|
||||
{ 922 * OVERSAMPLENR, 45 },
|
||||
{ 939 * OVERSAMPLENR, 40 },
|
||||
{ 954 * OVERSAMPLENR, 35 },
|
||||
{ 966 * OVERSAMPLENR, 30 },
|
||||
{ 977 * OVERSAMPLENR, 25 },
|
||||
{ 985 * OVERSAMPLENR, 20 },
|
||||
{ 993 * OVERSAMPLENR, 15 },
|
||||
{ 999 * OVERSAMPLENR, 10 },
|
||||
{ 1004 * OVERSAMPLENR, 5 },
|
||||
{ 1008 * OVERSAMPLENR, 0 },
|
||||
{ 1012 * OVERSAMPLENR, -5 },
|
||||
{ 1016 * OVERSAMPLENR, -10 },
|
||||
{ 1020 * OVERSAMPLENR, -15 }
|
||||
};
|
||||
@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// 100k RS thermistor 198-961 (4.7k pullup)
|
||||
const short temptable_10[][2] PROGMEM = {
|
||||
{ 1 * OVERSAMPLENR, 929 },
|
||||
{ 36 * OVERSAMPLENR, 299 },
|
||||
{ 71 * OVERSAMPLENR, 246 },
|
||||
{ 106 * OVERSAMPLENR, 217 },
|
||||
{ 141 * OVERSAMPLENR, 198 },
|
||||
{ 176 * OVERSAMPLENR, 184 },
|
||||
{ 211 * OVERSAMPLENR, 173 },
|
||||
{ 246 * OVERSAMPLENR, 163 },
|
||||
{ 281 * OVERSAMPLENR, 154 },
|
||||
{ 316 * OVERSAMPLENR, 147 },
|
||||
{ 351 * OVERSAMPLENR, 140 },
|
||||
{ 386 * OVERSAMPLENR, 134 },
|
||||
{ 421 * OVERSAMPLENR, 128 },
|
||||
{ 456 * OVERSAMPLENR, 122 },
|
||||
{ 491 * OVERSAMPLENR, 117 },
|
||||
{ 526 * OVERSAMPLENR, 112 },
|
||||
{ 561 * OVERSAMPLENR, 107 },
|
||||
{ 596 * OVERSAMPLENR, 102 },
|
||||
{ 631 * OVERSAMPLENR, 97 },
|
||||
{ 666 * OVERSAMPLENR, 91 },
|
||||
{ 701 * OVERSAMPLENR, 86 },
|
||||
{ 736 * OVERSAMPLENR, 81 },
|
||||
{ 771 * OVERSAMPLENR, 76 },
|
||||
{ 806 * OVERSAMPLENR, 70 },
|
||||
{ 841 * OVERSAMPLENR, 63 },
|
||||
{ 876 * OVERSAMPLENR, 56 },
|
||||
{ 911 * OVERSAMPLENR, 48 },
|
||||
{ 946 * OVERSAMPLENR, 38 },
|
||||
{ 981 * OVERSAMPLENR, 23 },
|
||||
{ 1005 * OVERSAMPLENR, 5 },
|
||||
{ 1016 * OVERSAMPLENR, 0 }
|
||||
};
|
||||
@ -0,0 +1,38 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// Pt1000 with 1k0 pullup
|
||||
const short temptable_1010[][2] PROGMEM = {
|
||||
PtLine( 0, 1000, 1000)
|
||||
PtLine( 25, 1000, 1000)
|
||||
PtLine( 50, 1000, 1000)
|
||||
PtLine( 75, 1000, 1000)
|
||||
PtLine(100, 1000, 1000)
|
||||
PtLine(125, 1000, 1000)
|
||||
PtLine(150, 1000, 1000)
|
||||
PtLine(175, 1000, 1000)
|
||||
PtLine(200, 1000, 1000)
|
||||
PtLine(225, 1000, 1000)
|
||||
PtLine(250, 1000, 1000)
|
||||
PtLine(275, 1000, 1000)
|
||||
PtLine(300, 1000, 1000)
|
||||
};
|
||||
@ -0,0 +1,33 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// Pt1000 with 4k7 pullup
|
||||
const short temptable_1047[][2] PROGMEM = {
|
||||
// only a few values are needed as the curve is very flat
|
||||
PtLine( 0, 1000, 4700)
|
||||
PtLine( 50, 1000, 4700)
|
||||
PtLine(100, 1000, 4700)
|
||||
PtLine(150, 1000, 4700)
|
||||
PtLine(200, 1000, 4700)
|
||||
PtLine(250, 1000, 4700)
|
||||
PtLine(300, 1000, 4700)
|
||||
};
|
||||
@ -0,0 +1,75 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// QU-BD silicone bed QWG-104F-3950 thermistor
|
||||
const short temptable_11[][2] PROGMEM = {
|
||||
{ 1 * OVERSAMPLENR, 938 },
|
||||
{ 31 * OVERSAMPLENR, 314 },
|
||||
{ 41 * OVERSAMPLENR, 290 },
|
||||
{ 51 * OVERSAMPLENR, 272 },
|
||||
{ 61 * OVERSAMPLENR, 258 },
|
||||
{ 71 * OVERSAMPLENR, 247 },
|
||||
{ 81 * OVERSAMPLENR, 237 },
|
||||
{ 91 * OVERSAMPLENR, 229 },
|
||||
{ 101 * OVERSAMPLENR, 221 },
|
||||
{ 111 * OVERSAMPLENR, 215 },
|
||||
{ 121 * OVERSAMPLENR, 209 },
|
||||
{ 131 * OVERSAMPLENR, 204 },
|
||||
{ 141 * OVERSAMPLENR, 199 },
|
||||
{ 151 * OVERSAMPLENR, 195 },
|
||||
{ 161 * OVERSAMPLENR, 190 },
|
||||
{ 171 * OVERSAMPLENR, 187 },
|
||||
{ 181 * OVERSAMPLENR, 183 },
|
||||
{ 191 * OVERSAMPLENR, 179 },
|
||||
{ 201 * OVERSAMPLENR, 176 },
|
||||
{ 221 * OVERSAMPLENR, 170 },
|
||||
{ 241 * OVERSAMPLENR, 165 },
|
||||
{ 261 * OVERSAMPLENR, 160 },
|
||||
{ 281 * OVERSAMPLENR, 155 },
|
||||
{ 301 * OVERSAMPLENR, 150 },
|
||||
{ 331 * OVERSAMPLENR, 144 },
|
||||
{ 361 * OVERSAMPLENR, 139 },
|
||||
{ 391 * OVERSAMPLENR, 133 },
|
||||
{ 421 * OVERSAMPLENR, 128 },
|
||||
{ 451 * OVERSAMPLENR, 123 },
|
||||
{ 491 * OVERSAMPLENR, 117 },
|
||||
{ 531 * OVERSAMPLENR, 111 },
|
||||
{ 571 * OVERSAMPLENR, 105 },
|
||||
{ 611 * OVERSAMPLENR, 100 },
|
||||
{ 641 * OVERSAMPLENR, 95 },
|
||||
{ 681 * OVERSAMPLENR, 90 },
|
||||
{ 711 * OVERSAMPLENR, 85 },
|
||||
{ 751 * OVERSAMPLENR, 79 },
|
||||
{ 791 * OVERSAMPLENR, 72 },
|
||||
{ 811 * OVERSAMPLENR, 69 },
|
||||
{ 831 * OVERSAMPLENR, 65 },
|
||||
{ 871 * OVERSAMPLENR, 57 },
|
||||
{ 881 * OVERSAMPLENR, 55 },
|
||||
{ 901 * OVERSAMPLENR, 51 },
|
||||
{ 921 * OVERSAMPLENR, 45 },
|
||||
{ 941 * OVERSAMPLENR, 39 },
|
||||
{ 971 * OVERSAMPLENR, 28 },
|
||||
{ 981 * OVERSAMPLENR, 23 },
|
||||
{ 991 * OVERSAMPLENR, 17 },
|
||||
{ 1001 * OVERSAMPLENR, 9 },
|
||||
{ 1021 * OVERSAMPLENR, -27 }
|
||||
};
|
||||
@ -0,0 +1,33 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// Pt100 with 1k0 pullup
|
||||
const short temptable_110[][2] PROGMEM = {
|
||||
// only a few values are needed as the curve is very flat
|
||||
PtLine( 0, 100, 1000)
|
||||
PtLine( 50, 100, 1000)
|
||||
PtLine(100, 100, 1000)
|
||||
PtLine(150, 100, 1000)
|
||||
PtLine(200, 100, 1000)
|
||||
PtLine(250, 100, 1000)
|
||||
PtLine(300, 100, 1000)
|
||||
};
|
||||
@ -0,0 +1,55 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
const short temptable_12[][2] PROGMEM = {
|
||||
{ 35 * OVERSAMPLENR, 180 }, // top rating 180C
|
||||
{ 211 * OVERSAMPLENR, 140 },
|
||||
{ 233 * OVERSAMPLENR, 135 },
|
||||
{ 261 * OVERSAMPLENR, 130 },
|
||||
{ 290 * OVERSAMPLENR, 125 },
|
||||
{ 328 * OVERSAMPLENR, 120 },
|
||||
{ 362 * OVERSAMPLENR, 115 },
|
||||
{ 406 * OVERSAMPLENR, 110 },
|
||||
{ 446 * OVERSAMPLENR, 105 },
|
||||
{ 496 * OVERSAMPLENR, 100 },
|
||||
{ 539 * OVERSAMPLENR, 95 },
|
||||
{ 585 * OVERSAMPLENR, 90 },
|
||||
{ 629 * OVERSAMPLENR, 85 },
|
||||
{ 675 * OVERSAMPLENR, 80 },
|
||||
{ 718 * OVERSAMPLENR, 75 },
|
||||
{ 758 * OVERSAMPLENR, 70 },
|
||||
{ 793 * OVERSAMPLENR, 65 },
|
||||
{ 822 * OVERSAMPLENR, 60 },
|
||||
{ 841 * OVERSAMPLENR, 55 },
|
||||
{ 875 * OVERSAMPLENR, 50 },
|
||||
{ 899 * OVERSAMPLENR, 45 },
|
||||
{ 926 * OVERSAMPLENR, 40 },
|
||||
{ 946 * OVERSAMPLENR, 35 },
|
||||
{ 962 * OVERSAMPLENR, 30 },
|
||||
{ 977 * OVERSAMPLENR, 25 },
|
||||
{ 987 * OVERSAMPLENR, 20 },
|
||||
{ 995 * OVERSAMPLENR, 15 },
|
||||
{ 1001 * OVERSAMPLENR, 10 },
|
||||
{ 1010 * OVERSAMPLENR, 0 },
|
||||
{ 1023 * OVERSAMPLENR, -40 }
|
||||
};
|
||||
@ -0,0 +1,48 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// Hisens thermistor B25/50 =3950 +/-1%
|
||||
const short temptable_13[][2] PROGMEM = {
|
||||
{ 20.04 * OVERSAMPLENR, 300 },
|
||||
{ 23.19 * OVERSAMPLENR, 290 },
|
||||
{ 26.71 * OVERSAMPLENR, 280 },
|
||||
{ 31.23 * OVERSAMPLENR, 270 },
|
||||
{ 36.52 * OVERSAMPLENR, 260 },
|
||||
{ 42.75 * OVERSAMPLENR, 250 },
|
||||
{ 50.68 * OVERSAMPLENR, 240 },
|
||||
{ 60.22 * OVERSAMPLENR, 230 },
|
||||
{ 72.03 * OVERSAMPLENR, 220 },
|
||||
{ 86.84 * OVERSAMPLENR, 210 },
|
||||
{ 102.79 * OVERSAMPLENR, 200 },
|
||||
{ 124.46 * OVERSAMPLENR, 190 },
|
||||
{ 151.02 * OVERSAMPLENR, 180 },
|
||||
{ 182.86 * OVERSAMPLENR, 170 },
|
||||
{ 220.72 * OVERSAMPLENR, 160 },
|
||||
{ 316.96 * OVERSAMPLENR, 140 },
|
||||
{ 447.17 * OVERSAMPLENR, 120 },
|
||||
{ 590.61 * OVERSAMPLENR, 100 },
|
||||
{ 737.31 * OVERSAMPLENR, 80 },
|
||||
{ 857.77 * OVERSAMPLENR, 60 },
|
||||
{ 939.52 * OVERSAMPLENR, 40 },
|
||||
{ 986.03 * OVERSAMPLENR, 20 },
|
||||
{ 1008.7 * OVERSAMPLENR, 0 }
|
||||
};
|
||||
@ -0,0 +1,33 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// Pt100 with 4k7 pullup
|
||||
const short temptable_147[][2] PROGMEM = {
|
||||
// only a few values are needed as the curve is very flat
|
||||
PtLine( 0, 100, 4700)
|
||||
PtLine( 50, 100, 4700)
|
||||
PtLine(100, 100, 4700)
|
||||
PtLine(150, 100, 4700)
|
||||
PtLine(200, 100, 4700)
|
||||
PtLine(250, 100, 4700)
|
||||
PtLine(300, 100, 4700)
|
||||
};
|
||||
@ -0,0 +1,61 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
//
|
||||
// 200k ATC Semitec 204GT-2
|
||||
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
|
||||
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
|
||||
//
|
||||
const short temptable_2[][2] PROGMEM = {
|
||||
{ 1 * OVERSAMPLENR, 848 },
|
||||
{ 30 * OVERSAMPLENR, 300 }, // top rating 300C
|
||||
{ 34 * OVERSAMPLENR, 290 },
|
||||
{ 39 * OVERSAMPLENR, 280 },
|
||||
{ 46 * OVERSAMPLENR, 270 },
|
||||
{ 53 * OVERSAMPLENR, 260 },
|
||||
{ 63 * OVERSAMPLENR, 250 },
|
||||
{ 74 * OVERSAMPLENR, 240 },
|
||||
{ 87 * OVERSAMPLENR, 230 },
|
||||
{ 104 * OVERSAMPLENR, 220 },
|
||||
{ 124 * OVERSAMPLENR, 210 },
|
||||
{ 148 * OVERSAMPLENR, 200 },
|
||||
{ 176 * OVERSAMPLENR, 190 },
|
||||
{ 211 * OVERSAMPLENR, 180 },
|
||||
{ 252 * OVERSAMPLENR, 170 },
|
||||
{ 301 * OVERSAMPLENR, 160 },
|
||||
{ 357 * OVERSAMPLENR, 150 },
|
||||
{ 420 * OVERSAMPLENR, 140 },
|
||||
{ 489 * OVERSAMPLENR, 130 },
|
||||
{ 562 * OVERSAMPLENR, 120 },
|
||||
{ 636 * OVERSAMPLENR, 110 },
|
||||
{ 708 * OVERSAMPLENR, 100 },
|
||||
{ 775 * OVERSAMPLENR, 90 },
|
||||
{ 835 * OVERSAMPLENR, 80 },
|
||||
{ 884 * OVERSAMPLENR, 70 },
|
||||
{ 924 * OVERSAMPLENR, 60 },
|
||||
{ 955 * OVERSAMPLENR, 50 },
|
||||
{ 977 * OVERSAMPLENR, 40 },
|
||||
{ 993 * OVERSAMPLENR, 30 },
|
||||
{ 1004 * OVERSAMPLENR, 20 },
|
||||
{ 1012 * OVERSAMPLENR, 10 },
|
||||
{ 1016 * OVERSAMPLENR, 0 }
|
||||
};
|
||||
@ -0,0 +1,96 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// PT100 with INA826 amp on Ultimaker v2.0 electronics
|
||||
// The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature.
|
||||
// This does not match the normal thermistor behaviour so we need to set the following defines
|
||||
#if (THERMISTORHEATER_0 == 20)
|
||||
#define HEATER_0_RAW_HI_TEMP 16383
|
||||
#define HEATER_0_RAW_LO_TEMP 0
|
||||
#endif
|
||||
#if (THERMISTORHEATER_1 == 20)
|
||||
#define HEATER_1_RAW_HI_TEMP 16383
|
||||
#define HEATER_1_RAW_LO_TEMP 0
|
||||
#endif
|
||||
#if (THERMISTORHEATER_2 == 20)
|
||||
#define HEATER_2_RAW_HI_TEMP 16383
|
||||
#define HEATER_2_RAW_LO_TEMP 0
|
||||
#endif
|
||||
#if (THERMISTORHEATER_3 == 20)
|
||||
#define HEATER_3_RAW_HI_TEMP 16383
|
||||
#define HEATER_3_RAW_LO_TEMP 0
|
||||
#endif
|
||||
#if (THERMISTORBED == 20)
|
||||
#define HEATER_BED_RAW_HI_TEMP 16383
|
||||
#define HEATER_BED_RAW_LO_TEMP 0
|
||||
#endif
|
||||
const short temptable_20[][2] PROGMEM = {
|
||||
{ 0 * OVERSAMPLENR, 0 },
|
||||
{ 227 * OVERSAMPLENR, 1 },
|
||||
{ 236 * OVERSAMPLENR, 10 },
|
||||
{ 245 * OVERSAMPLENR, 20 },
|
||||
{ 253 * OVERSAMPLENR, 30 },
|
||||
{ 262 * OVERSAMPLENR, 40 },
|
||||
{ 270 * OVERSAMPLENR, 50 },
|
||||
{ 279 * OVERSAMPLENR, 60 },
|
||||
{ 287 * OVERSAMPLENR, 70 },
|
||||
{ 295 * OVERSAMPLENR, 80 },
|
||||
{ 304 * OVERSAMPLENR, 90 },
|
||||
{ 312 * OVERSAMPLENR, 100 },
|
||||
{ 320 * OVERSAMPLENR, 110 },
|
||||
{ 329 * OVERSAMPLENR, 120 },
|
||||
{ 337 * OVERSAMPLENR, 130 },
|
||||
{ 345 * OVERSAMPLENR, 140 },
|
||||
{ 353 * OVERSAMPLENR, 150 },
|
||||
{ 361 * OVERSAMPLENR, 160 },
|
||||
{ 369 * OVERSAMPLENR, 170 },
|
||||
{ 377 * OVERSAMPLENR, 180 },
|
||||
{ 385 * OVERSAMPLENR, 190 },
|
||||
{ 393 * OVERSAMPLENR, 200 },
|
||||
{ 401 * OVERSAMPLENR, 210 },
|
||||
{ 409 * OVERSAMPLENR, 220 },
|
||||
{ 417 * OVERSAMPLENR, 230 },
|
||||
{ 424 * OVERSAMPLENR, 240 },
|
||||
{ 432 * OVERSAMPLENR, 250 },
|
||||
{ 440 * OVERSAMPLENR, 260 },
|
||||
{ 447 * OVERSAMPLENR, 270 },
|
||||
{ 455 * OVERSAMPLENR, 280 },
|
||||
{ 463 * OVERSAMPLENR, 290 },
|
||||
{ 470 * OVERSAMPLENR, 300 },
|
||||
{ 478 * OVERSAMPLENR, 310 },
|
||||
{ 485 * OVERSAMPLENR, 320 },
|
||||
{ 493 * OVERSAMPLENR, 330 },
|
||||
{ 500 * OVERSAMPLENR, 340 },
|
||||
{ 507 * OVERSAMPLENR, 350 },
|
||||
{ 515 * OVERSAMPLENR, 360 },
|
||||
{ 522 * OVERSAMPLENR, 370 },
|
||||
{ 529 * OVERSAMPLENR, 380 },
|
||||
{ 537 * OVERSAMPLENR, 390 },
|
||||
{ 544 * OVERSAMPLENR, 400 },
|
||||
{ 614 * OVERSAMPLENR, 500 },
|
||||
{ 681 * OVERSAMPLENR, 600 },
|
||||
{ 744 * OVERSAMPLENR, 700 },
|
||||
{ 805 * OVERSAMPLENR, 800 },
|
||||
{ 862 * OVERSAMPLENR, 900 },
|
||||
{ 917 * OVERSAMPLENR, 1000 },
|
||||
{ 968 * OVERSAMPLENR, 1100 }
|
||||
};
|
||||
@ -0,0 +1,53 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// mendel-parts
|
||||
const short temptable_3[][2] PROGMEM = {
|
||||
{ 1 * OVERSAMPLENR, 864 },
|
||||
{ 21 * OVERSAMPLENR, 300 },
|
||||
{ 25 * OVERSAMPLENR, 290 },
|
||||
{ 29 * OVERSAMPLENR, 280 },
|
||||
{ 33 * OVERSAMPLENR, 270 },
|
||||
{ 39 * OVERSAMPLENR, 260 },
|
||||
{ 46 * OVERSAMPLENR, 250 },
|
||||
{ 54 * OVERSAMPLENR, 240 },
|
||||
{ 64 * OVERSAMPLENR, 230 },
|
||||
{ 75 * OVERSAMPLENR, 220 },
|
||||
{ 90 * OVERSAMPLENR, 210 },
|
||||
{ 107 * OVERSAMPLENR, 200 },
|
||||
{ 128 * OVERSAMPLENR, 190 },
|
||||
{ 154 * OVERSAMPLENR, 180 },
|
||||
{ 184 * OVERSAMPLENR, 170 },
|
||||
{ 221 * OVERSAMPLENR, 160 },
|
||||
{ 265 * OVERSAMPLENR, 150 },
|
||||
{ 316 * OVERSAMPLENR, 140 },
|
||||
{ 375 * OVERSAMPLENR, 130 },
|
||||
{ 441 * OVERSAMPLENR, 120 },
|
||||
{ 513 * OVERSAMPLENR, 110 },
|
||||
{ 588 * OVERSAMPLENR, 100 },
|
||||
{ 734 * OVERSAMPLENR, 80 },
|
||||
{ 856 * OVERSAMPLENR, 60 },
|
||||
{ 938 * OVERSAMPLENR, 40 },
|
||||
{ 986 * OVERSAMPLENR, 20 },
|
||||
{ 1008 * OVERSAMPLENR, 0 },
|
||||
{ 1018 * OVERSAMPLENR, -20 }
|
||||
};
|
||||
@ -0,0 +1,45 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// 10k thermistor
|
||||
const short temptable_4[][2] PROGMEM = {
|
||||
{ 1 * OVERSAMPLENR, 430 },
|
||||
{ 54 * OVERSAMPLENR, 137 },
|
||||
{ 107 * OVERSAMPLENR, 107 },
|
||||
{ 160 * OVERSAMPLENR, 91 },
|
||||
{ 213 * OVERSAMPLENR, 80 },
|
||||
{ 266 * OVERSAMPLENR, 71 },
|
||||
{ 319 * OVERSAMPLENR, 64 },
|
||||
{ 372 * OVERSAMPLENR, 57 },
|
||||
{ 425 * OVERSAMPLENR, 51 },
|
||||
{ 478 * OVERSAMPLENR, 46 },
|
||||
{ 531 * OVERSAMPLENR, 41 },
|
||||
{ 584 * OVERSAMPLENR, 35 },
|
||||
{ 637 * OVERSAMPLENR, 30 },
|
||||
{ 690 * OVERSAMPLENR, 25 },
|
||||
{ 743 * OVERSAMPLENR, 20 },
|
||||
{ 796 * OVERSAMPLENR, 14 },
|
||||
{ 849 * OVERSAMPLENR, 7 },
|
||||
{ 902 * OVERSAMPLENR, 0 },
|
||||
{ 955 * OVERSAMPLENR, -11 },
|
||||
{ 1008 * OVERSAMPLENR, -35 }
|
||||
};
|
||||
@ -0,0 +1,60 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// 100k ParCan thermistor (104GT-2)
|
||||
// ATC Semitec 104GT-2 (Used in ParCan)
|
||||
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
|
||||
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
|
||||
const short temptable_5[][2] PROGMEM = {
|
||||
{ 1 * OVERSAMPLENR, 713 },
|
||||
{ 17 * OVERSAMPLENR, 300 }, // top rating 300C
|
||||
{ 20 * OVERSAMPLENR, 290 },
|
||||
{ 23 * OVERSAMPLENR, 280 },
|
||||
{ 27 * OVERSAMPLENR, 270 },
|
||||
{ 31 * OVERSAMPLENR, 260 },
|
||||
{ 37 * OVERSAMPLENR, 250 },
|
||||
{ 43 * OVERSAMPLENR, 240 },
|
||||
{ 51 * OVERSAMPLENR, 230 },
|
||||
{ 61 * OVERSAMPLENR, 220 },
|
||||
{ 73 * OVERSAMPLENR, 210 },
|
||||
{ 87 * OVERSAMPLENR, 200 },
|
||||
{ 106 * OVERSAMPLENR, 190 },
|
||||
{ 128 * OVERSAMPLENR, 180 },
|
||||
{ 155 * OVERSAMPLENR, 170 },
|
||||
{ 189 * OVERSAMPLENR, 160 },
|
||||
{ 230 * OVERSAMPLENR, 150 },
|
||||
{ 278 * OVERSAMPLENR, 140 },
|
||||
{ 336 * OVERSAMPLENR, 130 },
|
||||
{ 402 * OVERSAMPLENR, 120 },
|
||||
{ 476 * OVERSAMPLENR, 110 },
|
||||
{ 554 * OVERSAMPLENR, 100 },
|
||||
{ 635 * OVERSAMPLENR, 90 },
|
||||
{ 713 * OVERSAMPLENR, 80 },
|
||||
{ 784 * OVERSAMPLENR, 70 },
|
||||
{ 846 * OVERSAMPLENR, 60 },
|
||||
{ 897 * OVERSAMPLENR, 50 },
|
||||
{ 937 * OVERSAMPLENR, 40 },
|
||||
{ 966 * OVERSAMPLENR, 30 },
|
||||
{ 986 * OVERSAMPLENR, 20 },
|
||||
{ 1000 * OVERSAMPLENR, 10 },
|
||||
{ 1010 * OVERSAMPLENR, 0 }
|
||||
};
|
||||
@ -0,0 +1,81 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
|
||||
// Verified by linagee.
|
||||
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
|
||||
// Advantage: Twice the resolution and better linearity from 150C to 200C
|
||||
const short temptable_51[][2] PROGMEM = {
|
||||
{ 1 * OVERSAMPLENR, 350 },
|
||||
{ 190 * OVERSAMPLENR, 250 }, // top rating 250C
|
||||
{ 203 * OVERSAMPLENR, 245 },
|
||||
{ 217 * OVERSAMPLENR, 240 },
|
||||
{ 232 * OVERSAMPLENR, 235 },
|
||||
{ 248 * OVERSAMPLENR, 230 },
|
||||
{ 265 * OVERSAMPLENR, 225 },
|
||||
{ 283 * OVERSAMPLENR, 220 },
|
||||
{ 302 * OVERSAMPLENR, 215 },
|
||||
{ 322 * OVERSAMPLENR, 210 },
|
||||
{ 344 * OVERSAMPLENR, 205 },
|
||||
{ 366 * OVERSAMPLENR, 200 },
|
||||
{ 390 * OVERSAMPLENR, 195 },
|
||||
{ 415 * OVERSAMPLENR, 190 },
|
||||
{ 440 * OVERSAMPLENR, 185 },
|
||||
{ 467 * OVERSAMPLENR, 180 },
|
||||
{ 494 * OVERSAMPLENR, 175 },
|
||||
{ 522 * OVERSAMPLENR, 170 },
|
||||
{ 551 * OVERSAMPLENR, 165 },
|
||||
{ 580 * OVERSAMPLENR, 160 },
|
||||
{ 609 * OVERSAMPLENR, 155 },
|
||||
{ 638 * OVERSAMPLENR, 150 },
|
||||
{ 666 * OVERSAMPLENR, 145 },
|
||||
{ 695 * OVERSAMPLENR, 140 },
|
||||
{ 722 * OVERSAMPLENR, 135 },
|
||||
{ 749 * OVERSAMPLENR, 130 },
|
||||
{ 775 * OVERSAMPLENR, 125 },
|
||||
{ 800 * OVERSAMPLENR, 120 },
|
||||
{ 823 * OVERSAMPLENR, 115 },
|
||||
{ 845 * OVERSAMPLENR, 110 },
|
||||
{ 865 * OVERSAMPLENR, 105 },
|
||||
{ 884 * OVERSAMPLENR, 100 },
|
||||
{ 901 * OVERSAMPLENR, 95 },
|
||||
{ 917 * OVERSAMPLENR, 90 },
|
||||
{ 932 * OVERSAMPLENR, 85 },
|
||||
{ 944 * OVERSAMPLENR, 80 },
|
||||
{ 956 * OVERSAMPLENR, 75 },
|
||||
{ 966 * OVERSAMPLENR, 70 },
|
||||
{ 975 * OVERSAMPLENR, 65 },
|
||||
{ 982 * OVERSAMPLENR, 60 },
|
||||
{ 989 * OVERSAMPLENR, 55 },
|
||||
{ 995 * OVERSAMPLENR, 50 },
|
||||
{ 1000 * OVERSAMPLENR, 45 },
|
||||
{ 1004 * OVERSAMPLENR, 40 },
|
||||
{ 1007 * OVERSAMPLENR, 35 },
|
||||
{ 1010 * OVERSAMPLENR, 30 },
|
||||
{ 1013 * OVERSAMPLENR, 25 },
|
||||
{ 1015 * OVERSAMPLENR, 20 },
|
||||
{ 1017 * OVERSAMPLENR, 15 },
|
||||
{ 1018 * OVERSAMPLENR, 10 },
|
||||
{ 1019 * OVERSAMPLENR, 5 },
|
||||
{ 1020 * OVERSAMPLENR, 0 },
|
||||
{ 1021 * OVERSAMPLENR, -5 }
|
||||
};
|
||||
@ -0,0 +1,60 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
|
||||
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
|
||||
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
|
||||
// Advantage: More resolution and better linearity from 150C to 200C
|
||||
const short temptable_52[][2] PROGMEM = {
|
||||
{ 1 * OVERSAMPLENR, 500 },
|
||||
{ 125 * OVERSAMPLENR, 300 }, // top rating 300C
|
||||
{ 142 * OVERSAMPLENR, 290 },
|
||||
{ 162 * OVERSAMPLENR, 280 },
|
||||
{ 185 * OVERSAMPLENR, 270 },
|
||||
{ 211 * OVERSAMPLENR, 260 },
|
||||
{ 240 * OVERSAMPLENR, 250 },
|
||||
{ 274 * OVERSAMPLENR, 240 },
|
||||
{ 312 * OVERSAMPLENR, 230 },
|
||||
{ 355 * OVERSAMPLENR, 220 },
|
||||
{ 401 * OVERSAMPLENR, 210 },
|
||||
{ 452 * OVERSAMPLENR, 200 },
|
||||
{ 506 * OVERSAMPLENR, 190 },
|
||||
{ 563 * OVERSAMPLENR, 180 },
|
||||
{ 620 * OVERSAMPLENR, 170 },
|
||||
{ 677 * OVERSAMPLENR, 160 },
|
||||
{ 732 * OVERSAMPLENR, 150 },
|
||||
{ 783 * OVERSAMPLENR, 140 },
|
||||
{ 830 * OVERSAMPLENR, 130 },
|
||||
{ 871 * OVERSAMPLENR, 120 },
|
||||
{ 906 * OVERSAMPLENR, 110 },
|
||||
{ 935 * OVERSAMPLENR, 100 },
|
||||
{ 958 * OVERSAMPLENR, 90 },
|
||||
{ 976 * OVERSAMPLENR, 80 },
|
||||
{ 990 * OVERSAMPLENR, 70 },
|
||||
{ 1000 * OVERSAMPLENR, 60 },
|
||||
{ 1008 * OVERSAMPLENR, 50 },
|
||||
{ 1013 * OVERSAMPLENR, 40 },
|
||||
{ 1017 * OVERSAMPLENR, 30 },
|
||||
{ 1019 * OVERSAMPLENR, 20 },
|
||||
{ 1021 * OVERSAMPLENR, 10 },
|
||||
{ 1022 * OVERSAMPLENR, 0 }
|
||||
};
|
||||
@ -0,0 +1,60 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
|
||||
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
|
||||
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
|
||||
// Advantage: More resolution and better linearity from 150C to 200C
|
||||
const short temptable_55[][2] PROGMEM = {
|
||||
{ 1 * OVERSAMPLENR, 500 },
|
||||
{ 76 * OVERSAMPLENR, 300 },
|
||||
{ 87 * OVERSAMPLENR, 290 },
|
||||
{ 100 * OVERSAMPLENR, 280 },
|
||||
{ 114 * OVERSAMPLENR, 270 },
|
||||
{ 131 * OVERSAMPLENR, 260 },
|
||||
{ 152 * OVERSAMPLENR, 250 },
|
||||
{ 175 * OVERSAMPLENR, 240 },
|
||||
{ 202 * OVERSAMPLENR, 230 },
|
||||
{ 234 * OVERSAMPLENR, 220 },
|
||||
{ 271 * OVERSAMPLENR, 210 },
|
||||
{ 312 * OVERSAMPLENR, 200 },
|
||||
{ 359 * OVERSAMPLENR, 190 },
|
||||
{ 411 * OVERSAMPLENR, 180 },
|
||||
{ 467 * OVERSAMPLENR, 170 },
|
||||
{ 527 * OVERSAMPLENR, 160 },
|
||||
{ 590 * OVERSAMPLENR, 150 },
|
||||
{ 652 * OVERSAMPLENR, 140 },
|
||||
{ 713 * OVERSAMPLENR, 130 },
|
||||
{ 770 * OVERSAMPLENR, 120 },
|
||||
{ 822 * OVERSAMPLENR, 110 },
|
||||
{ 867 * OVERSAMPLENR, 100 },
|
||||
{ 905 * OVERSAMPLENR, 90 },
|
||||
{ 936 * OVERSAMPLENR, 80 },
|
||||
{ 961 * OVERSAMPLENR, 70 },
|
||||
{ 979 * OVERSAMPLENR, 60 },
|
||||
{ 993 * OVERSAMPLENR, 50 },
|
||||
{ 1003 * OVERSAMPLENR, 40 },
|
||||
{ 1010 * OVERSAMPLENR, 30 },
|
||||
{ 1015 * OVERSAMPLENR, 20 },
|
||||
{ 1018 * OVERSAMPLENR, 10 },
|
||||
{ 1020 * OVERSAMPLENR, 0 }
|
||||
};
|
||||
@ -0,0 +1,63 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// 100k Epcos thermistor
|
||||
const short temptable_6[][2] PROGMEM = {
|
||||
{ 1 * OVERSAMPLENR, 350 },
|
||||
{ 28 * OVERSAMPLENR, 250 }, // top rating 250C
|
||||
{ 31 * OVERSAMPLENR, 245 },
|
||||
{ 35 * OVERSAMPLENR, 240 },
|
||||
{ 39 * OVERSAMPLENR, 235 },
|
||||
{ 42 * OVERSAMPLENR, 230 },
|
||||
{ 44 * OVERSAMPLENR, 225 },
|
||||
{ 49 * OVERSAMPLENR, 220 },
|
||||
{ 53 * OVERSAMPLENR, 215 },
|
||||
{ 62 * OVERSAMPLENR, 210 },
|
||||
{ 71 * OVERSAMPLENR, 205 }, // fitted graphically
|
||||
{ 78 * OVERSAMPLENR, 200 }, // fitted graphically
|
||||
{ 94 * OVERSAMPLENR, 190 },
|
||||
{ 102 * OVERSAMPLENR, 185 },
|
||||
{ 116 * OVERSAMPLENR, 170 },
|
||||
{ 143 * OVERSAMPLENR, 160 },
|
||||
{ 183 * OVERSAMPLENR, 150 },
|
||||
{ 223 * OVERSAMPLENR, 140 },
|
||||
{ 270 * OVERSAMPLENR, 130 },
|
||||
{ 318 * OVERSAMPLENR, 120 },
|
||||
{ 383 * OVERSAMPLENR, 110 },
|
||||
{ 413 * OVERSAMPLENR, 105 },
|
||||
{ 439 * OVERSAMPLENR, 100 },
|
||||
{ 484 * OVERSAMPLENR, 95 },
|
||||
{ 513 * OVERSAMPLENR, 90 },
|
||||
{ 607 * OVERSAMPLENR, 80 },
|
||||
{ 664 * OVERSAMPLENR, 70 },
|
||||
{ 781 * OVERSAMPLENR, 60 },
|
||||
{ 810 * OVERSAMPLENR, 55 },
|
||||
{ 849 * OVERSAMPLENR, 50 },
|
||||
{ 914 * OVERSAMPLENR, 45 },
|
||||
{ 914 * OVERSAMPLENR, 40 },
|
||||
{ 935 * OVERSAMPLENR, 35 },
|
||||
{ 954 * OVERSAMPLENR, 30 },
|
||||
{ 970 * OVERSAMPLENR, 25 },
|
||||
{ 978 * OVERSAMPLENR, 22 },
|
||||
{ 1008 * OVERSAMPLENR, 3 },
|
||||
{ 1023 * OVERSAMPLENR, 0 } // to allow internal 0 degrees C
|
||||
};
|
||||
@ -0,0 +1,105 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// Maker's Tool Works Kapton Bed Thermistor
|
||||
// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=3950
|
||||
// r0: 100000
|
||||
// t0: 25
|
||||
// r1: 0 (parallel with rTherm)
|
||||
// r2: 4700 (series with rTherm)
|
||||
// beta: 3950
|
||||
// min adc: 1 at 0.0048828125 V
|
||||
// max adc: 1023 at 4.9951171875 V
|
||||
const short temptable_60[][2] PROGMEM = {
|
||||
{ 51 * OVERSAMPLENR, 272 },
|
||||
{ 61 * OVERSAMPLENR, 258 },
|
||||
{ 71 * OVERSAMPLENR, 247 },
|
||||
{ 81 * OVERSAMPLENR, 237 },
|
||||
{ 91 * OVERSAMPLENR, 229 },
|
||||
{ 101 * OVERSAMPLENR, 221 },
|
||||
{ 131 * OVERSAMPLENR, 204 },
|
||||
{ 161 * OVERSAMPLENR, 190 },
|
||||
{ 191 * OVERSAMPLENR, 179 },
|
||||
{ 231 * OVERSAMPLENR, 167 },
|
||||
{ 271 * OVERSAMPLENR, 157 },
|
||||
{ 311 * OVERSAMPLENR, 148 },
|
||||
{ 351 * OVERSAMPLENR, 140 },
|
||||
{ 381 * OVERSAMPLENR, 135 },
|
||||
{ 411 * OVERSAMPLENR, 130 },
|
||||
{ 441 * OVERSAMPLENR, 125 },
|
||||
{ 451 * OVERSAMPLENR, 123 },
|
||||
{ 461 * OVERSAMPLENR, 122 },
|
||||
{ 471 * OVERSAMPLENR, 120 },
|
||||
{ 481 * OVERSAMPLENR, 119 },
|
||||
{ 491 * OVERSAMPLENR, 117 },
|
||||
{ 501 * OVERSAMPLENR, 116 },
|
||||
{ 511 * OVERSAMPLENR, 114 },
|
||||
{ 521 * OVERSAMPLENR, 113 },
|
||||
{ 531 * OVERSAMPLENR, 111 },
|
||||
{ 541 * OVERSAMPLENR, 110 },
|
||||
{ 551 * OVERSAMPLENR, 108 },
|
||||
{ 561 * OVERSAMPLENR, 107 },
|
||||
{ 571 * OVERSAMPLENR, 105 },
|
||||
{ 581 * OVERSAMPLENR, 104 },
|
||||
{ 591 * OVERSAMPLENR, 102 },
|
||||
{ 601 * OVERSAMPLENR, 101 },
|
||||
{ 611 * OVERSAMPLENR, 100 },
|
||||
{ 621 * OVERSAMPLENR, 98 },
|
||||
{ 631 * OVERSAMPLENR, 97 },
|
||||
{ 641 * OVERSAMPLENR, 95 },
|
||||
{ 651 * OVERSAMPLENR, 94 },
|
||||
{ 661 * OVERSAMPLENR, 92 },
|
||||
{ 671 * OVERSAMPLENR, 91 },
|
||||
{ 681 * OVERSAMPLENR, 90 },
|
||||
{ 691 * OVERSAMPLENR, 88 },
|
||||
{ 701 * OVERSAMPLENR, 87 },
|
||||
{ 711 * OVERSAMPLENR, 85 },
|
||||
{ 721 * OVERSAMPLENR, 84 },
|
||||
{ 731 * OVERSAMPLENR, 82 },
|
||||
{ 741 * OVERSAMPLENR, 81 },
|
||||
{ 751 * OVERSAMPLENR, 79 },
|
||||
{ 761 * OVERSAMPLENR, 77 },
|
||||
{ 771 * OVERSAMPLENR, 76 },
|
||||
{ 781 * OVERSAMPLENR, 74 },
|
||||
{ 791 * OVERSAMPLENR, 72 },
|
||||
{ 801 * OVERSAMPLENR, 71 },
|
||||
{ 811 * OVERSAMPLENR, 69 },
|
||||
{ 821 * OVERSAMPLENR, 67 },
|
||||
{ 831 * OVERSAMPLENR, 65 },
|
||||
{ 841 * OVERSAMPLENR, 63 },
|
||||
{ 851 * OVERSAMPLENR, 62 },
|
||||
{ 861 * OVERSAMPLENR, 60 },
|
||||
{ 871 * OVERSAMPLENR, 57 },
|
||||
{ 881 * OVERSAMPLENR, 55 },
|
||||
{ 891 * OVERSAMPLENR, 53 },
|
||||
{ 901 * OVERSAMPLENR, 51 },
|
||||
{ 911 * OVERSAMPLENR, 48 },
|
||||
{ 921 * OVERSAMPLENR, 45 },
|
||||
{ 931 * OVERSAMPLENR, 42 },
|
||||
{ 941 * OVERSAMPLENR, 39 },
|
||||
{ 951 * OVERSAMPLENR, 36 },
|
||||
{ 961 * OVERSAMPLENR, 32 },
|
||||
{ 981 * OVERSAMPLENR, 23 },
|
||||
{ 991 * OVERSAMPLENR, 17 },
|
||||
{ 1001 * OVERSAMPLENR, 9 },
|
||||
{ 1008 * OVERSAMPLENR, 0 }
|
||||
};
|
||||
@ -0,0 +1,52 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// DyzeDesign 500°C Thermistor
|
||||
const short temptable_66[][2] PROGMEM = {
|
||||
{ 17.5 * OVERSAMPLENR, 850 },
|
||||
{ 17.9 * OVERSAMPLENR, 500 },
|
||||
{ 21.7 * OVERSAMPLENR, 480 },
|
||||
{ 26.6 * OVERSAMPLENR, 460 },
|
||||
{ 33.1 * OVERSAMPLENR, 440 },
|
||||
{ 41.0 * OVERSAMPLENR, 420 },
|
||||
{ 52.3 * OVERSAMPLENR, 400 },
|
||||
{ 67.7 * OVERSAMPLENR, 380 },
|
||||
{ 86.5 * OVERSAMPLENR, 360 },
|
||||
{ 112.0 * OVERSAMPLENR, 340 },
|
||||
{ 147.2 * OVERSAMPLENR, 320 },
|
||||
{ 194.0 * OVERSAMPLENR, 300 },
|
||||
{ 254.3 * OVERSAMPLENR, 280 },
|
||||
{ 330.2 * OVERSAMPLENR, 260 },
|
||||
{ 427.9 * OVERSAMPLENR, 240 },
|
||||
{ 533.4 * OVERSAMPLENR, 220 },
|
||||
{ 646.5 * OVERSAMPLENR, 200 },
|
||||
{ 754.4 * OVERSAMPLENR, 180 },
|
||||
{ 844.3 * OVERSAMPLENR, 160 },
|
||||
{ 911.7 * OVERSAMPLENR, 140 },
|
||||
{ 958.6 * OVERSAMPLENR, 120 },
|
||||
{ 988.8 * OVERSAMPLENR, 100 },
|
||||
{ 1006.6 * OVERSAMPLENR, 80 },
|
||||
{ 1015.8 * OVERSAMPLENR, 60 },
|
||||
{ 1021.3 * OVERSAMPLENR, 30 },
|
||||
{ 1023 * OVERSAMPLENR - 1, 25},
|
||||
{ 1023 * OVERSAMPLENR, 20}
|
||||
};
|
||||
@ -0,0 +1,83 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// 100k Honeywell 135-104LAG-J01
|
||||
const short temptable_7[][2] PROGMEM = {
|
||||
{ 1 * OVERSAMPLENR, 941 },
|
||||
{ 19 * OVERSAMPLENR, 362 },
|
||||
{ 37 * OVERSAMPLENR, 299 }, // top rating 300C
|
||||
{ 55 * OVERSAMPLENR, 266 },
|
||||
{ 73 * OVERSAMPLENR, 245 },
|
||||
{ 91 * OVERSAMPLENR, 229 },
|
||||
{ 109 * OVERSAMPLENR, 216 },
|
||||
{ 127 * OVERSAMPLENR, 206 },
|
||||
{ 145 * OVERSAMPLENR, 197 },
|
||||
{ 163 * OVERSAMPLENR, 190 },
|
||||
{ 181 * OVERSAMPLENR, 183 },
|
||||
{ 199 * OVERSAMPLENR, 177 },
|
||||
{ 217 * OVERSAMPLENR, 171 },
|
||||
{ 235 * OVERSAMPLENR, 166 },
|
||||
{ 253 * OVERSAMPLENR, 162 },
|
||||
{ 271 * OVERSAMPLENR, 157 },
|
||||
{ 289 * OVERSAMPLENR, 153 },
|
||||
{ 307 * OVERSAMPLENR, 149 },
|
||||
{ 325 * OVERSAMPLENR, 146 },
|
||||
{ 343 * OVERSAMPLENR, 142 },
|
||||
{ 361 * OVERSAMPLENR, 139 },
|
||||
{ 379 * OVERSAMPLENR, 135 },
|
||||
{ 397 * OVERSAMPLENR, 132 },
|
||||
{ 415 * OVERSAMPLENR, 129 },
|
||||
{ 433 * OVERSAMPLENR, 126 },
|
||||
{ 451 * OVERSAMPLENR, 123 },
|
||||
{ 469 * OVERSAMPLENR, 121 },
|
||||
{ 487 * OVERSAMPLENR, 118 },
|
||||
{ 505 * OVERSAMPLENR, 115 },
|
||||
{ 523 * OVERSAMPLENR, 112 },
|
||||
{ 541 * OVERSAMPLENR, 110 },
|
||||
{ 559 * OVERSAMPLENR, 107 },
|
||||
{ 577 * OVERSAMPLENR, 105 },
|
||||
{ 595 * OVERSAMPLENR, 102 },
|
||||
{ 613 * OVERSAMPLENR, 99 },
|
||||
{ 631 * OVERSAMPLENR, 97 },
|
||||
{ 649 * OVERSAMPLENR, 94 },
|
||||
{ 667 * OVERSAMPLENR, 92 },
|
||||
{ 685 * OVERSAMPLENR, 89 },
|
||||
{ 703 * OVERSAMPLENR, 86 },
|
||||
{ 721 * OVERSAMPLENR, 84 },
|
||||
{ 739 * OVERSAMPLENR, 81 },
|
||||
{ 757 * OVERSAMPLENR, 78 },
|
||||
{ 775 * OVERSAMPLENR, 75 },
|
||||
{ 793 * OVERSAMPLENR, 72 },
|
||||
{ 811 * OVERSAMPLENR, 69 },
|
||||
{ 829 * OVERSAMPLENR, 66 },
|
||||
{ 847 * OVERSAMPLENR, 62 },
|
||||
{ 865 * OVERSAMPLENR, 59 },
|
||||
{ 883 * OVERSAMPLENR, 55 },
|
||||
{ 901 * OVERSAMPLENR, 51 },
|
||||
{ 919 * OVERSAMPLENR, 46 },
|
||||
{ 937 * OVERSAMPLENR, 41 },
|
||||
{ 955 * OVERSAMPLENR, 35 },
|
||||
{ 973 * OVERSAMPLENR, 27 },
|
||||
{ 991 * OVERSAMPLENR, 17 },
|
||||
{ 1009 * OVERSAMPLENR, 1 },
|
||||
{ 1023 * OVERSAMPLENR, 0 } // to allow internal 0 degrees C
|
||||
};
|
||||
@ -0,0 +1,86 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// bqh2 stock thermistor
|
||||
const short temptable_70[][2] PROGMEM = {
|
||||
{ 22 * OVERSAMPLENR, 300 },
|
||||
{ 24 * OVERSAMPLENR, 295 },
|
||||
{ 25 * OVERSAMPLENR, 290 },
|
||||
{ 27 * OVERSAMPLENR, 285 },
|
||||
{ 29 * OVERSAMPLENR, 280 },
|
||||
{ 32 * OVERSAMPLENR, 275 },
|
||||
{ 34 * OVERSAMPLENR, 270 },
|
||||
{ 37 * OVERSAMPLENR, 265 },
|
||||
{ 40 * OVERSAMPLENR, 260 },
|
||||
{ 43 * OVERSAMPLENR, 255 },
|
||||
{ 46 * OVERSAMPLENR, 250 },
|
||||
{ 50 * OVERSAMPLENR, 245 },
|
||||
{ 54 * OVERSAMPLENR, 240 },
|
||||
{ 59 * OVERSAMPLENR, 235 },
|
||||
{ 64 * OVERSAMPLENR, 230 },
|
||||
{ 70 * OVERSAMPLENR, 225 },
|
||||
{ 76 * OVERSAMPLENR, 220 },
|
||||
{ 83 * OVERSAMPLENR, 215 },
|
||||
{ 90 * OVERSAMPLENR, 210 },
|
||||
{ 99 * OVERSAMPLENR, 205 },
|
||||
{ 108 * OVERSAMPLENR, 200 },
|
||||
{ 118 * OVERSAMPLENR, 195 },
|
||||
{ 129 * OVERSAMPLENR, 190 },
|
||||
{ 141 * OVERSAMPLENR, 185 },
|
||||
{ 154 * OVERSAMPLENR, 180 },
|
||||
{ 169 * OVERSAMPLENR, 175 },
|
||||
{ 185 * OVERSAMPLENR, 170 },
|
||||
{ 203 * OVERSAMPLENR, 165 },
|
||||
{ 222 * OVERSAMPLENR, 160 },
|
||||
{ 243 * OVERSAMPLENR, 155 },
|
||||
{ 266 * OVERSAMPLENR, 150 },
|
||||
{ 290 * OVERSAMPLENR, 145 },
|
||||
{ 317 * OVERSAMPLENR, 140 },
|
||||
{ 346 * OVERSAMPLENR, 135 },
|
||||
{ 376 * OVERSAMPLENR, 130 },
|
||||
{ 408 * OVERSAMPLENR, 125 },
|
||||
{ 442 * OVERSAMPLENR, 120 },
|
||||
{ 477 * OVERSAMPLENR, 115 },
|
||||
{ 513 * OVERSAMPLENR, 110 },
|
||||
{ 551 * OVERSAMPLENR, 105 },
|
||||
{ 588 * OVERSAMPLENR, 100 },
|
||||
{ 626 * OVERSAMPLENR, 95 },
|
||||
{ 663 * OVERSAMPLENR, 90 },
|
||||
{ 699 * OVERSAMPLENR, 85 },
|
||||
{ 735 * OVERSAMPLENR, 80 },
|
||||
{ 768 * OVERSAMPLENR, 75 },
|
||||
{ 800 * OVERSAMPLENR, 70 },
|
||||
{ 829 * OVERSAMPLENR, 65 },
|
||||
{ 856 * OVERSAMPLENR, 60 },
|
||||
{ 881 * OVERSAMPLENR, 55 },
|
||||
{ 903 * OVERSAMPLENR, 50 },
|
||||
{ 922 * OVERSAMPLENR, 45 },
|
||||
{ 939 * OVERSAMPLENR, 40 },
|
||||
{ 954 * OVERSAMPLENR, 35 },
|
||||
{ 966 * OVERSAMPLENR, 30 },
|
||||
{ 977 * OVERSAMPLENR, 25 },
|
||||
{ 986 * OVERSAMPLENR, 20 },
|
||||
{ 994 * OVERSAMPLENR, 15 },
|
||||
{ 1000 * OVERSAMPLENR, 10 },
|
||||
{ 1005 * OVERSAMPLENR, 5 },
|
||||
{ 1009 * OVERSAMPLENR, 0 } // safety
|
||||
};
|
||||
@ -0,0 +1,171 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// 100k Honeywell 135-104LAF-J01
|
||||
// R0 = 100000 Ohm
|
||||
// T0 = 25 °C
|
||||
// Beta = 3974
|
||||
// R1 = 0 Ohm
|
||||
// R2 = 4700 Ohm
|
||||
const short temptable_71[][2] PROGMEM = {
|
||||
{ 35 * OVERSAMPLENR, 300 },
|
||||
{ 51 * OVERSAMPLENR, 270 },
|
||||
{ 54 * OVERSAMPLENR, 265 },
|
||||
{ 58 * OVERSAMPLENR, 260 },
|
||||
{ 59 * OVERSAMPLENR, 258 },
|
||||
{ 61 * OVERSAMPLENR, 256 },
|
||||
{ 63 * OVERSAMPLENR, 254 },
|
||||
{ 64 * OVERSAMPLENR, 252 },
|
||||
{ 66 * OVERSAMPLENR, 250 },
|
||||
{ 67 * OVERSAMPLENR, 249 },
|
||||
{ 68 * OVERSAMPLENR, 248 },
|
||||
{ 69 * OVERSAMPLENR, 247 },
|
||||
{ 70 * OVERSAMPLENR, 246 },
|
||||
{ 71 * OVERSAMPLENR, 245 },
|
||||
{ 72 * OVERSAMPLENR, 244 },
|
||||
{ 73 * OVERSAMPLENR, 243 },
|
||||
{ 74 * OVERSAMPLENR, 242 },
|
||||
{ 75 * OVERSAMPLENR, 241 },
|
||||
{ 76 * OVERSAMPLENR, 240 },
|
||||
{ 77 * OVERSAMPLENR, 239 },
|
||||
{ 78 * OVERSAMPLENR, 238 },
|
||||
{ 79 * OVERSAMPLENR, 237 },
|
||||
{ 80 * OVERSAMPLENR, 236 },
|
||||
{ 81 * OVERSAMPLENR, 235 },
|
||||
{ 82 * OVERSAMPLENR, 234 },
|
||||
{ 84 * OVERSAMPLENR, 233 },
|
||||
{ 85 * OVERSAMPLENR, 232 },
|
||||
{ 86 * OVERSAMPLENR, 231 },
|
||||
{ 87 * OVERSAMPLENR, 230 },
|
||||
{ 89 * OVERSAMPLENR, 229 },
|
||||
{ 90 * OVERSAMPLENR, 228 },
|
||||
{ 91 * OVERSAMPLENR, 227 },
|
||||
{ 92 * OVERSAMPLENR, 226 },
|
||||
{ 94 * OVERSAMPLENR, 225 },
|
||||
{ 95 * OVERSAMPLENR, 224 },
|
||||
{ 97 * OVERSAMPLENR, 223 },
|
||||
{ 98 * OVERSAMPLENR, 222 },
|
||||
{ 99 * OVERSAMPLENR, 221 },
|
||||
{ 101 * OVERSAMPLENR, 220 },
|
||||
{ 102 * OVERSAMPLENR, 219 },
|
||||
{ 104 * OVERSAMPLENR, 218 },
|
||||
{ 106 * OVERSAMPLENR, 217 },
|
||||
{ 107 * OVERSAMPLENR, 216 },
|
||||
{ 109 * OVERSAMPLENR, 215 },
|
||||
{ 110 * OVERSAMPLENR, 214 },
|
||||
{ 112 * OVERSAMPLENR, 213 },
|
||||
{ 114 * OVERSAMPLENR, 212 },
|
||||
{ 115 * OVERSAMPLENR, 211 },
|
||||
{ 117 * OVERSAMPLENR, 210 },
|
||||
{ 119 * OVERSAMPLENR, 209 },
|
||||
{ 121 * OVERSAMPLENR, 208 },
|
||||
{ 123 * OVERSAMPLENR, 207 },
|
||||
{ 125 * OVERSAMPLENR, 206 },
|
||||
{ 126 * OVERSAMPLENR, 205 },
|
||||
{ 128 * OVERSAMPLENR, 204 },
|
||||
{ 130 * OVERSAMPLENR, 203 },
|
||||
{ 132 * OVERSAMPLENR, 202 },
|
||||
{ 134 * OVERSAMPLENR, 201 },
|
||||
{ 136 * OVERSAMPLENR, 200 },
|
||||
{ 139 * OVERSAMPLENR, 199 },
|
||||
{ 141 * OVERSAMPLENR, 198 },
|
||||
{ 143 * OVERSAMPLENR, 197 },
|
||||
{ 145 * OVERSAMPLENR, 196 },
|
||||
{ 147 * OVERSAMPLENR, 195 },
|
||||
{ 150 * OVERSAMPLENR, 194 },
|
||||
{ 152 * OVERSAMPLENR, 193 },
|
||||
{ 154 * OVERSAMPLENR, 192 },
|
||||
{ 157 * OVERSAMPLENR, 191 },
|
||||
{ 159 * OVERSAMPLENR, 190 },
|
||||
{ 162 * OVERSAMPLENR, 189 },
|
||||
{ 164 * OVERSAMPLENR, 188 },
|
||||
{ 167 * OVERSAMPLENR, 187 },
|
||||
{ 170 * OVERSAMPLENR, 186 },
|
||||
{ 172 * OVERSAMPLENR, 185 },
|
||||
{ 175 * OVERSAMPLENR, 184 },
|
||||
{ 178 * OVERSAMPLENR, 183 },
|
||||
{ 181 * OVERSAMPLENR, 182 },
|
||||
{ 184 * OVERSAMPLENR, 181 },
|
||||
{ 187 * OVERSAMPLENR, 180 },
|
||||
{ 190 * OVERSAMPLENR, 179 },
|
||||
{ 193 * OVERSAMPLENR, 178 },
|
||||
{ 196 * OVERSAMPLENR, 177 },
|
||||
{ 199 * OVERSAMPLENR, 176 },
|
||||
{ 202 * OVERSAMPLENR, 175 },
|
||||
{ 205 * OVERSAMPLENR, 174 },
|
||||
{ 208 * OVERSAMPLENR, 173 },
|
||||
{ 212 * OVERSAMPLENR, 172 },
|
||||
{ 215 * OVERSAMPLENR, 171 },
|
||||
{ 219 * OVERSAMPLENR, 170 },
|
||||
{ 237 * OVERSAMPLENR, 165 },
|
||||
{ 256 * OVERSAMPLENR, 160 },
|
||||
{ 300 * OVERSAMPLENR, 150 },
|
||||
{ 351 * OVERSAMPLENR, 140 },
|
||||
{ 470 * OVERSAMPLENR, 120 },
|
||||
{ 504 * OVERSAMPLENR, 115 },
|
||||
{ 538 * OVERSAMPLENR, 110 },
|
||||
{ 552 * OVERSAMPLENR, 108 },
|
||||
{ 566 * OVERSAMPLENR, 106 },
|
||||
{ 580 * OVERSAMPLENR, 104 },
|
||||
{ 594 * OVERSAMPLENR, 102 },
|
||||
{ 608 * OVERSAMPLENR, 100 },
|
||||
{ 622 * OVERSAMPLENR, 98 },
|
||||
{ 636 * OVERSAMPLENR, 96 },
|
||||
{ 650 * OVERSAMPLENR, 94 },
|
||||
{ 664 * OVERSAMPLENR, 92 },
|
||||
{ 678 * OVERSAMPLENR, 90 },
|
||||
{ 712 * OVERSAMPLENR, 85 },
|
||||
{ 745 * OVERSAMPLENR, 80 },
|
||||
{ 758 * OVERSAMPLENR, 78 },
|
||||
{ 770 * OVERSAMPLENR, 76 },
|
||||
{ 783 * OVERSAMPLENR, 74 },
|
||||
{ 795 * OVERSAMPLENR, 72 },
|
||||
{ 806 * OVERSAMPLENR, 70 },
|
||||
{ 818 * OVERSAMPLENR, 68 },
|
||||
{ 829 * OVERSAMPLENR, 66 },
|
||||
{ 840 * OVERSAMPLENR, 64 },
|
||||
{ 850 * OVERSAMPLENR, 62 },
|
||||
{ 860 * OVERSAMPLENR, 60 },
|
||||
{ 870 * OVERSAMPLENR, 58 },
|
||||
{ 879 * OVERSAMPLENR, 56 },
|
||||
{ 888 * OVERSAMPLENR, 54 },
|
||||
{ 897 * OVERSAMPLENR, 52 },
|
||||
{ 905 * OVERSAMPLENR, 50 },
|
||||
{ 924 * OVERSAMPLENR, 45 },
|
||||
{ 940 * OVERSAMPLENR, 40 },
|
||||
{ 955 * OVERSAMPLENR, 35 },
|
||||
{ 967 * OVERSAMPLENR, 30 },
|
||||
{ 970 * OVERSAMPLENR, 29 },
|
||||
{ 972 * OVERSAMPLENR, 28 },
|
||||
{ 974 * OVERSAMPLENR, 27 },
|
||||
{ 976 * OVERSAMPLENR, 26 },
|
||||
{ 978 * OVERSAMPLENR, 25 },
|
||||
{ 980 * OVERSAMPLENR, 24 },
|
||||
{ 982 * OVERSAMPLENR, 23 },
|
||||
{ 984 * OVERSAMPLENR, 22 },
|
||||
{ 985 * OVERSAMPLENR, 21 },
|
||||
{ 987 * OVERSAMPLENR, 20 },
|
||||
{ 995 * OVERSAMPLENR, 15 },
|
||||
{ 1001 * OVERSAMPLENR, 10 },
|
||||
{ 1006 * OVERSAMPLENR, 5 },
|
||||
{ 1010 * OVERSAMPLENR, 0 }
|
||||
};
|
||||
@ -0,0 +1,45 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
const short temptable_8[][2] PROGMEM = {
|
||||
{ 1 * OVERSAMPLENR, 704 },
|
||||
{ 54 * OVERSAMPLENR, 216 },
|
||||
{ 107 * OVERSAMPLENR, 175 },
|
||||
{ 160 * OVERSAMPLENR, 152 },
|
||||
{ 213 * OVERSAMPLENR, 137 },
|
||||
{ 266 * OVERSAMPLENR, 125 },
|
||||
{ 319 * OVERSAMPLENR, 115 },
|
||||
{ 372 * OVERSAMPLENR, 106 },
|
||||
{ 425 * OVERSAMPLENR, 99 },
|
||||
{ 478 * OVERSAMPLENR, 91 },
|
||||
{ 531 * OVERSAMPLENR, 85 },
|
||||
{ 584 * OVERSAMPLENR, 78 },
|
||||
{ 637 * OVERSAMPLENR, 71 },
|
||||
{ 690 * OVERSAMPLENR, 65 },
|
||||
{ 743 * OVERSAMPLENR, 58 },
|
||||
{ 796 * OVERSAMPLENR, 50 },
|
||||
{ 849 * OVERSAMPLENR, 42 },
|
||||
{ 902 * OVERSAMPLENR, 31 },
|
||||
{ 955 * OVERSAMPLENR, 17 },
|
||||
{ 1008 * OVERSAMPLENR, 0 }
|
||||
};
|
||||
@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
const short temptable_9[][2] PROGMEM = {
|
||||
{ 1 * OVERSAMPLENR, 936 },
|
||||
{ 36 * OVERSAMPLENR, 300 },
|
||||
{ 71 * OVERSAMPLENR, 246 },
|
||||
{ 106 * OVERSAMPLENR, 218 },
|
||||
{ 141 * OVERSAMPLENR, 199 },
|
||||
{ 176 * OVERSAMPLENR, 185 },
|
||||
{ 211 * OVERSAMPLENR, 173 },
|
||||
{ 246 * OVERSAMPLENR, 163 },
|
||||
{ 281 * OVERSAMPLENR, 155 },
|
||||
{ 316 * OVERSAMPLENR, 147 },
|
||||
{ 351 * OVERSAMPLENR, 140 },
|
||||
{ 386 * OVERSAMPLENR, 134 },
|
||||
{ 421 * OVERSAMPLENR, 128 },
|
||||
{ 456 * OVERSAMPLENR, 122 },
|
||||
{ 491 * OVERSAMPLENR, 117 },
|
||||
{ 526 * OVERSAMPLENR, 112 },
|
||||
{ 561 * OVERSAMPLENR, 107 },
|
||||
{ 596 * OVERSAMPLENR, 102 },
|
||||
{ 631 * OVERSAMPLENR, 97 },
|
||||
{ 666 * OVERSAMPLENR, 92 },
|
||||
{ 701 * OVERSAMPLENR, 87 },
|
||||
{ 736 * OVERSAMPLENR, 81 },
|
||||
{ 771 * OVERSAMPLENR, 76 },
|
||||
{ 806 * OVERSAMPLENR, 70 },
|
||||
{ 841 * OVERSAMPLENR, 63 },
|
||||
{ 876 * OVERSAMPLENR, 56 },
|
||||
{ 911 * OVERSAMPLENR, 48 },
|
||||
{ 946 * OVERSAMPLENR, 38 },
|
||||
{ 981 * OVERSAMPLENR, 23 },
|
||||
{ 1005 * OVERSAMPLENR, 5 },
|
||||
{ 1016 * OVERSAMPLENR, 0 }
|
||||
};
|
||||
@ -0,0 +1,32 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// User-defined table 1
|
||||
// Dummy Thermistor table.. It will ALWAYS read a fixed value.
|
||||
#ifndef DUMMY_THERMISTOR_998_VALUE
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
#endif
|
||||
|
||||
const short temptable_998[][2] PROGMEM = {
|
||||
{ 1 * OVERSAMPLENR, DUMMY_THERMISTOR_998_VALUE },
|
||||
{ 1023 * OVERSAMPLENR, DUMMY_THERMISTOR_998_VALUE }
|
||||
};
|
||||
@ -0,0 +1,32 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// User-defined table 2
|
||||
// Dummy Thermistor table.. It will ALWAYS read a fixed value.
|
||||
#ifndef DUMMY_THERMISTOR_999_VALUE
|
||||
#define DUMMY_THERMISTOR_999_VALUE 25
|
||||
#endif
|
||||
|
||||
const short temptable_999[][2] PROGMEM = {
|
||||
{ 1 * OVERSAMPLENR, DUMMY_THERMISTOR_999_VALUE },
|
||||
{ 1023 * OVERSAMPLENR, DUMMY_THERMISTOR_999_VALUE }
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue