Merge Extrusion_rate_heater_compensation

9 years ago · 42e381f8e2
parent b5987de08a db27e67580
commit 42e381f8e2
21 changed files with 110 additions and 31 deletions
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -41,7 +41,8 @@
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
  #define PID_ADD_EXTRUSION_RATE
  #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
  #endif
 #endif

--- a/Marlin/Marlin.h
+++ b/Marlin/Marlin.h
@ -329,6 +329,10 @@ extern int fanSpeed;
  extern int meas_delay_cm; //delay distance
 #endif

+#if ENABLED(PID_ADD_EXTRUSION_RATE)
+  extern int lpq_len;
+#endif
+
 #if ENABLED(FWRETRACT)
  extern bool autoretract_enabled;
  extern bool retracted[EXTRUDERS]; // extruder[n].retracted
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@ -420,6 +420,10 @@ bool target_direction;
  boolean chdkActive = false;
 #endif

+#if ENABLED(PID_ADD_EXTRUSION_RATE)
+  int lpq_len = 20;
+#endif
+
 //===========================================================================
 //================================ Functions ================================
 //===========================================================================
@ -4770,7 +4774,16 @@ inline void gcode_M226() {
 #if ENABLED(PIDTEMP)

  /**
-   * M301: Set PID parameters P I D (and optionally C)
+   * M301: Set PID parameters P I D (and optionally C, L)
+   *
+   *   P[float] Kp term
+   *   I[float] Ki term (unscaled)
+   *   D[float] Kd term (unscaled)
+   *
+   * With PID_ADD_EXTRUSION_RATE:
+   *
+   *   C[float] Kc term
+   *   L[float] LPQ length
   */
  inline void gcode_M301() {

@ -4784,6 +4797,8 @@ inline void gcode_M226() {
      if (code_seen('D')) PID_PARAM(Kd, e) = scalePID_d(code_value());
      #if ENABLED(PID_ADD_EXTRUSION_RATE)
        if (code_seen('C')) PID_PARAM(Kc, e) = code_value();
+        if (code_seen('L')) lpq_len = code_value();
+        NOMORE(lpq_len, LPQ_MAX_LEN);
      #endif

      updatePID();
--- a/Marlin/configuration_store.cpp
+++ b/Marlin/configuration_store.cpp
@ -14,7 +14,7 @@
 *
 */

-#define EEPROM_VERSION "V20"
+#define EEPROM_VERSION "V21"

 /**
 * V19 EEPROM Layout:
@ -60,6 +60,7 @@
 *  M301 E1 PIDC  Kp[1], Ki[1], Kd[1], Kc[1]
 *  M301 E2 PIDC  Kp[2], Ki[2], Kd[2], Kc[2]
 *  M301 E3 PIDC  Kp[3], Ki[3], Kd[3], Kc[3]
+ *  M301 L        lpq_len
 *
 * PIDTEMPBED:
 *  M304 PID  bedKp, bedKi, bedKd
@ -227,6 +228,11 @@ void Config_StoreSettings()  {

  } // Extruders Loop

+  #if DISABLED(PID_ADD_EXTRUSION_RATE)
+    int lpq_len = 20;
+  #endif
+  EEPROM_WRITE_VAR(i, lpq_len);
+
  #if DISABLED(PIDTEMPBED)
    float bedKp = DUMMY_PID_VALUE, bedKi = DUMMY_PID_VALUE, bedKd = DUMMY_PID_VALUE;
  #endif
@ -393,6 +399,11 @@ void Config_RetrieveSettings() {
      for (int q=16; q--;) EEPROM_READ_VAR(i, dummy);  // 4x Kp, Ki, Kd, Kc
    #endif // !PIDTEMP

+    #if DISABLED(PID_ADD_EXTRUSION_RATE)
+      int lpq_len;
+    #endif
+    EEPROM_READ_VAR(i, lpq_len);
+
    #if DISABLED(PIDTEMPBED)
      float bedKp, bedKi, bedKd;
    #endif
@ -539,6 +550,9 @@ void Config_ResetDefault() {
        PID_PARAM(Kc, e) = DEFAULT_Kc;
      #endif
    }
+    #if ENABLED(PID_ADD_EXTRUSION_RATE)
+      lpq_len = 20; // default last-position-queue size
+    #endif
    // call updatePID (similar to when we have processed M301)
    updatePID();
  #endif // PIDTEMP
@ -744,7 +758,8 @@ void Config_PrintSettings(bool forReplay) {
            SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, i)));
            #if ENABLED(PID_ADD_EXTRUSION_RATE)
              SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, i));
-            #endif      
+              if (i == 0) SERIAL_ECHOPAIR(" L", lpq_len);
+            #endif
            SERIAL_EOL;
          }
        }
@ -758,7 +773,8 @@ void Config_PrintSettings(bool forReplay) {
        SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, 0)));
        #if ENABLED(PID_ADD_EXTRUSION_RATE)
          SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, 0));
-        #endif      
+          SERIAL_ECHOPAIR(" L", lpq_len);
+        #endif
        SERIAL_EOL;
      }
    #endif // PIDTEMP
--- a/Marlin/configurator/config/Configuration_adv.h
+++ b/Marlin/configurator/config/Configuration_adv.h
@ -41,7 +41,8 @@
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
  #define PID_ADD_EXTRUSION_RATE
  #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
  #endif
 #endif

--- a/Marlin/configurator/config/language.h
+++ b/Marlin/configurator/config/language.h
@ -199,6 +199,7 @@
 #define MSG_PID_DEBUG_PTERM                 " pTerm "
 #define MSG_PID_DEBUG_ITERM                 " iTerm "
 #define MSG_PID_DEBUG_DTERM                 " dTerm "
+#define MSG_PID_DEBUG_CTERM                 " cTerm "
 #define MSG_INVALID_EXTRUDER_NUM            " - Invalid extruder number !"

 #define MSG_HEATER_BED                      "bed"
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@ -51,7 +51,8 @@
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
  #define PID_ADD_EXTRUSION_RATE
  #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
  #endif
 #endif

--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@ -51,7 +51,8 @@
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
  #define PID_ADD_EXTRUSION_RATE
  #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
  #endif
 #endif

--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@ -51,7 +51,8 @@
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
  #define PID_ADD_EXTRUSION_RATE
  #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
  #endif
 #endif

--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@ -41,7 +41,8 @@
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
  #define PID_ADD_EXTRUSION_RATE
  #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
  #endif
 #endif

--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@ -51,7 +51,8 @@
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
  #define PID_ADD_EXTRUSION_RATE
  #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
  #endif
 #endif

--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@ -41,7 +41,8 @@
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
  #define PID_ADD_EXTRUSION_RATE
  #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
  #endif
 #endif

--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@ -51,7 +51,8 @@
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
  #define PID_ADD_EXTRUSION_RATE
  #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
  #endif
 #endif

--- a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
@ -51,7 +51,8 @@
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
  #define PID_ADD_EXTRUSION_RATE
  #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
  #endif
 #endif

--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@ -51,7 +51,8 @@
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
  #define PID_ADD_EXTRUSION_RATE
  #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
  #endif
 #endif

--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@ -51,7 +51,8 @@
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
  #define PID_ADD_EXTRUSION_RATE
  #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
  #endif
 #endif

--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@ -55,7 +55,8 @@
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
  #define PID_ADD_EXTRUSION_RATE
  #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
  #endif
 #endif

--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@ -51,7 +51,8 @@
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
  #define PID_ADD_EXTRUSION_RATE
  #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
  #endif
 #endif

--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@ -51,7 +51,8 @@
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
  #define PID_ADD_EXTRUSION_RATE
  #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
  #endif
 #endif

--- a/Marlin/language.h
+++ b/Marlin/language.h
@ -200,6 +200,7 @@
 #define MSG_PID_DEBUG_PTERM                 " pTerm "
 #define MSG_PID_DEBUG_ITERM                 " iTerm "
 #define MSG_PID_DEBUG_DTERM                 " dTerm "
+#define MSG_PID_DEBUG_CTERM                 " cTerm "
 #define MSG_INVALID_EXTRUDER_NUM            " - Invalid extruder number !"

 #define MSG_HEATER_BED                      "bed"
--- a/Marlin/temperature.cpp
+++ b/Marlin/temperature.cpp
@ -99,6 +99,12 @@ static volatile bool temp_meas_ready = false;
  static float pTerm[EXTRUDERS];
  static float iTerm[EXTRUDERS];
  static float dTerm[EXTRUDERS];
+  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+    static float cTerm[EXTRUDERS];
+    static long last_position[EXTRUDERS];
+    static long lpq[LPQ_MAX_LEN];
+    static int lpq_ptr = 0;
+  #endif
  //int output;
  static float pid_error[EXTRUDERS];
  static float temp_iState_min[EXTRUDERS];
@ -357,6 +363,9 @@ void updatePID() {
  #if ENABLED(PIDTEMP)
    for (int e = 0; e < EXTRUDERS; e++) {
      temp_iState_max[e] = PID_INTEGRAL_DRIVE_MAX / PID_PARAM(Ki,e);
+      #if ENABLED(PID_ADD_EXTRUSION_RATE)
+        last_position[e] = 0;
+      #endif
    }
  #endif
  #if ENABLED(PIDTEMPBED)
@ -497,6 +506,23 @@ float get_pid_output(int e) {
        iTerm[e] = PID_PARAM(Ki,e) * temp_iState[e];

        pid_output = pTerm[e] + iTerm[e] - dTerm[e];
+
+        #if ENABLED(PID_ADD_EXTRUSION_RATE)
+          cTerm[e] = 0;
+          if (e == active_extruder) {
+            long e_position = st_get_position(E_AXIS);
+            if (e_position > last_position[e]) {
+              lpq[lpq_ptr++] = e_position - last_position[e];
+              last_position[e] = e_position;
+            } else {
+              lpq[lpq_ptr++] = 0;
+            }
+            if (lpq_ptr >= lpq_len) lpq_ptr = 0;
+            cTerm[e] = (lpq[lpq_ptr] / axis_steps_per_unit[E_AXIS]) * Kc;
+            pid_output += cTerm[e];
+          }
+        #endif //PID_ADD_EXTRUSION_RATE
+
        if (pid_output > PID_MAX) {
          if (pid_error[e] > 0) temp_iState[e] -= pid_error[e]; // conditional un-integration
          pid_output = PID_MAX;
@ -512,18 +538,16 @@ float get_pid_output(int e) {

    #if ENABLED(PID_DEBUG)
      SERIAL_ECHO_START;
-      SERIAL_ECHO(MSG_PID_DEBUG);
-      SERIAL_ECHO(e);
-      SERIAL_ECHO(MSG_PID_DEBUG_INPUT);
-      SERIAL_ECHO(current_temperature[e]);
-      SERIAL_ECHO(MSG_PID_DEBUG_OUTPUT);
-      SERIAL_ECHO(pid_output);
-      SERIAL_ECHO(MSG_PID_DEBUG_PTERM);
-      SERIAL_ECHO(pTerm[e]);
-      SERIAL_ECHO(MSG_PID_DEBUG_ITERM);
-      SERIAL_ECHO(iTerm[e]);
-      SERIAL_ECHO(MSG_PID_DEBUG_DTERM);
-      SERIAL_ECHOLN(dTerm[e]);
+      SERIAL_ECHOPAIR(MSG_PID_DEBUG, e);
+      SERIAL_ECHOPAIR(MSG_PID_DEBUG_INPUT, current_temperature[e]);
+      SERIAL_ECHOPAIR(MSG_PID_DEBUG_OUTPUT, pid_output);
+      SERIAL_ECHOPAIR(MSG_PID_DEBUG_PTERM, pTerm[e]);
+      SERIAL_ECHOPAIR(MSG_PID_DEBUG_ITERM, iTerm[e]);
+      SERIAL_ECHOPAIR(MSG_PID_DEBUG_DTERM, dTerm[e]);
+      #if ENABLED(PID_ADD_EXTRUSION_RATE)
+        SERIAL_ECHOPAIR(MSG_PID_DEBUG_CTERM, cTerm[e]);
+      #endif
+      SERIAL_EOL;
    #endif //PID_DEBUG

  #else /* PID off */
@ -837,6 +861,9 @@ void tp_init() {
    #if ENABLED(PIDTEMP)
      temp_iState_min[e] = 0.0;
      temp_iState_max[e] = PID_INTEGRAL_DRIVE_MAX / PID_PARAM(Ki,e);
+      #if ENABLED(PID_ADD_EXTRUSION_RATE)
+        last_position[e] = 0;
+      #endif
    #endif //PIDTEMP
    #if ENABLED(PIDTEMPBED)
      temp_iState_min_bed = 0.0;