scube/Marlin/src/feature/runout.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * feature/runout.h - Runout sensor support
 */

#ifndef _RUNOUT_H_
#define _RUNOUT_H_

#include "../sd/cardreader.h"
#include "../module/printcounter.h"
#include "../module/stepper.h"
#include "../gcode/queue.h"

#include "../inc/MarlinConfig.h"

#define FIL_RUNOUT_THRESHOLD 5

class FilamentRunoutSensor {
  public:
    static bool enabled;

    FilamentRunoutSensor() {}

    static void setup();

    FORCE_INLINE static void reset() { runout_count = 0; filament_ran_out = false; }

    FORCE_INLINE static void run() {
      if ((IS_SD_PRINTING || print_job_timer.isRunning()) && check() && !filament_ran_out) {
        filament_ran_out = true;
        enqueue_and_echo_commands_P(PSTR(FILAMENT_RUNOUT_SCRIPT));
        planner.synchronize();
      }
    }
  private:
    static bool filament_ran_out;
    static uint8_t runout_count;

    FORCE_INLINE static bool check() {
      if (!enabled) return false;
      #if NUM_RUNOUT_SENSORS < 2
        // A single sensor applying to all extruders
        const bool is_out = READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING;
      #else
        // Read the sensor for the active extruder
        bool is_out;
        #if ENABLED(DUAL_X_CARRIAGE)
          const bool out1 = READ(FIL_RUNOUT_PIN ) == FIL_RUNOUT_INVERTING,
                     out2 = READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_INVERTING;
          if (extruder_duplication_enabled)
            is_out = out1 || out2;
          else
            is_out = active_extruder ? out2 : out1;
        #else
          switch (active_extruder) {
            case 0: is_out = READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING; break;
            case 1: is_out = READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_INVERTING; break;
            #if NUM_RUNOUT_SENSORS > 2
              case 2: is_out = READ(FIL_RUNOUT3_PIN) == FIL_RUNOUT_INVERTING; break;
              #if NUM_RUNOUT_SENSORS > 3
                case 3: is_out = READ(FIL_RUNOUT4_PIN) == FIL_RUNOUT_INVERTING; break;
                #if NUM_RUNOUT_SENSORS > 4
                  case 4: is_out = READ(FIL_RUNOUT5_PIN) == FIL_RUNOUT_INVERTING; break;
                  #if NUM_RUNOUT_SENSORS > 5
                    case 5: is_out = READ(FIL_RUNOUT6_PIN) == FIL_RUNOUT_INVERTING; break;
                  #endif // > 5
                #endif // > 4
              #endif // > 3
            #endif // > 2
        }
        #endif
      #endif
      return (is_out ? ++runout_count : (runout_count = 0)) > FIL_RUNOUT_THRESHOLD;
    }
};

extern FilamentRunoutSensor runout;

#endif // _RUNOUT_H_